Subversion Repositories f9daq

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/mman.h>
#include <errno.h>
#include <signal.h>
#include <ctype.h>
#include <time.h>
//#include "../include/wusbxx_dll.h" /* the header of the shared library */
#include "../include/daq.h"

//#define DEBUG /* vkljuci dodatni izpis */
#ifdef DEBUG
  #define DBG(X) X
  #define DBGFUNI(X) printf(">>> %s -> %d\n",#X,(X))
#else
  #define DBG(X)
  #define DBGFUNI(X) X
#endif

/* definiram lokacije enot*/
//#define NTDC 1         /* TDC */
//#define NTDCCH 8
//#define NADC 2         /* ADC */
//#define NADCCH 8
int ctrlc=0;
char *ccserial=(char*)"CC0126";
int devDetect;  // variable to tell if we detect any devices

int daq::connect(){
// odpri daq
/*  xxusb_device_type devices[100];
  //struct usb_device *dev;
  devDetect = xxusb_devices_find(devices);
//  printf("Detected devices: %d\n", devDetect);
  //dev = devices[0].usbdev;
  //udev = xxusb_device_open(dev);

  if(devDetect > 0)
  {
    WUSBXX_load(NULL);
    WUSBXX_open(ccserial);
    printf("daq::connect()\n");
  }
  else
*/    printf("daq::connect() - No devices were detected!\n");
  return 0;
}

int daq::init(int chan = 0){

//    int i;  
//    long k;

/*    DBGFUNI(xxusb_register_write(udev,1,0x0)); // Stop DAQ mode
    while (xxusb_usbfifo_read(udev, (int*) stackdump,BUFF_L,100)>0); 
  
    CCCZ;
    CCCC;
    CREM_I;

    NTDC = 1;
    NADC = 2;
    if(chan != 0)
    {
      NTDCCH = chan/2;
      NADCCH = chan/2;
    }
    else
    {
      NTDCCH = 1;
      NADCCH = 1;
    }
    printf("after: NTDCCH = %d, NADCCH = %d\n", NTDCCH, NADCCH);

// create command stack for the TDC and ADC
    k=1;
    for(i=0;(i<NTDCCH)&&(i<NADCCH);i++) { stackwrite[k++]=NAF(NTDC,i,0); stackwrite[k++]=NAF(NADC,i,0); }
//    for(i=0;i<NADCCH;i++) stackwrite[k++]=NAF(NADC,i,0);
    stackwrite[k++]=NAF(NTDC,0,9);
    stackwrite[k++]=NAF(NADC,0,9);
    stackwrite[k++]=NAFS(0,0,16); // insert next word to data
    stackwrite[k++]=0xfafb; // event termination word
    stackwrite[0]=k-1;
// upload stack #2
    xxusb_stack_write(udev,0x2,(long int *)stackwrite);
    xxusb_stack_read(udev,0x2,(long int *) stackdata);
    DBG(for(i=0;i<k;i++) printf("0x%04x\n",stackdata[i]);)

    int ret[10];
    
    CAMAC_LED_settings(udev, 1,1,0,0);
    ret[0] = CAMAC_register_read(udev,0,&k);
    printf("Firmware ID (return %d) -> 0x%08lX\n",ret[0],k);            // GKM: Firmware ID (i.e. 0x72000001 = 0111 0010 0000 0000 0000 0000 0000 0001)
    ret[1] = CAMAC_register_read(udev,1,&k);
    printf("Global Mode (return %d) -> 0x%08lX\n",ret[1],k);
    k=(k&0xF000)|0x0005; // set buffer length: n=0..6 -> 0x10000 >> n, n=7 -> single event
    ret[0] = CAMAC_register_write(udev,1,k);                            // GKM: sets the buffer length (i.e. k=5 -> buf length=128 words)
    ret[1] = CAMAC_register_write(udev,2,0x80); // wait 0x80 us after trigger           // GKM: delay settings in microseconds
    ret[2] = CAMAC_register_write(udev,3,0x0); // Scaler Readout Control Register               // GKM: scaler readout settings - sets the frequency of readout (if 0, it is disabled)
    ret[3] = CAMAC_register_write(udev,9,0x0); // Lam Mask Register             // GKM: When 0, readout is triggered by the signal on NIM input
    ret[4] = CAMAC_register_write(udev,14,0x0); // USB Bulk Transfer Setup Register

    //    CAMAC_DGG(udev,1,2,3,0,200,0,0);
    //    CAMAC_DGG(udev,0,0,0,0,100,0,0);
    ret[5] = CAMAC_register_write(udev,5,(0x06<<16)+(0x04<<8)+0x00); // output          // GKM: NIM outputs (i.e. 0x060400 = 00 0110 0000 0100 0000 0000 -> NIM O2=DGG_B, NIM O3=DGG_A)
    ret[6] = CAMAC_register_write(udev,6,(0x01<<24)+(0x01<<16)+(0x0<<8)+0x0); // SCLR & DGG     // GKM: device source selector (i.e. 0x01010000 = 00 0000 0001 0000 0001 0000 0000 0000 0000 -> DGG_A=NIM I1, DGG_B=NIM I1, SCLR=disabled)
    ret[7] = CAMAC_register_write(udev,7,(100<<16)+0); // output                // GKM: Delay and Gate Generator A registers (i.e. 0x00640000 = 0000 0000 0110 0100 0000 0000 0000 0000 -> DDG_A [gate=100, delay=0])
    ret[8] = CAMAC_register_write(udev,8,(10000<<16)+0); // output      // GKM: Delay and Gate Generator B registers (i.e. 0x27100000 = 0010 0111 0001 0000 0000 0000 0000 0000 -> DDG_B [gate=10000, delay=0])
    ret[9] = CAMAC_register_write(udev,13,0); // output         // GKM: Extended (course) delay (i.e. 0x00000000 = 0 -> DDG_A ext=0, DDG_B ext=0)

//    for(i = 0; i < 10; i++) printf("Setting %d? -> return = %d\n",i,ret[i]);

//    ret[0] = CAMAC_register_read(udev,1,&k);
//    printf("k (return %d) -> 0x%08lX\n",ret[0],k);
    
*/    printf("daq::init()\n");
    return 0;
}

int daq::start(){
//    xxusb_register_write(udev,1,0x1); // Start DAQ mode
    printf("daq::start()\n");
    return 0;
}

int daq::stop(){
//    xxusb_register_write(udev,1,0x0); // Stop DAQ mode
//    while (xxusb_usbfifo_read(udev,(int *)stackdump,BUFF_L,30)>0);
    printf("daq::stop()\n");
    return 0;
}

int daq::event(unsigned int *data, int maxn){
//    int ib,count;
    int count;
/*    int events,evsize;
    short ret;

    ib=0;
    ret=xxusb_usbfifo_read(udev,(int *) stackdata,BUFF_L,500);
    events=stackdata[ib++];
    DBG(printf("ret=%d,events=0x%08x\n",ret,events);)
      if ((ret<0)||(ret!=(((NTDCCH+NADCCH)*4+4)*events+4))) return 0;

    count=0;
    while (ib<(ret/2-1)){
      evsize = stackdata[ib++]&0xffff;
      DBG(printf("Event:%d EvSize:%d\n", events, evsize);)
      for (int i=0;i<(NTDCCH+NADCCH);i++,ib++)  data[count++] =stackdata[ib++]&0xffff;
      if (stackdata[ib++]!=0xfafb){
        printf("Error!\n");,
        return 0;
      }
      events--;
      if (fStop) return 0;
    } 
    if (stackdata[ib++]!=0xffff){
      printf("Error!\n");
      return 0;
    }
*/
    count = 1;
    return count;
}
  
int daq::disconnect(){ 
// zapri daq
//    WUSBXX_close();
    printf("daq::disconnect()\n");
    return 0;
}

daq::daq(){
  fStop=0;
  connect();
//  if(devDetect > 0)
//    init();
}

daq::~daq(){
disconnect();
}

#ifdef MAIN
void CatchSig (int signumber)
{
   ctrlc = 1;
}


int main (int argc, char **argv){
  
  int neve=1000000;
  char *fname="test.dat";
  if (argc==1) {
    printf("Uporaba: %s stevilo_dogodkov ime_datoteke\n",argv[0]);
    printf("Meritev prekini s Ctrl-C, ce je nabranih dogodkov ze dovolj\n");
    exit(0);
  } 
  if (argc>1) neve  = atoi(argv[1]);
  if (argc>2) fname = argv[2];
  
  
// intercept routine
  if (signal (SIGINT, CatchSig) == SIG_E,RR) perror ("sigignore");
   
#define BSIZE 10000
  int i,ieve,nc,nb;
//  int hdr[4]={1,(NTDCCH+4)*sizeof(int)};      // hdr[0]=1, hdr[1]=(NTDCCH+4)*4
  int hdr[4]={1,(NTDCCH+NADCCH+4)*sizeof(int)};
  unsigned short adc;
  unsigned int data[BSIZE];
  daq *d= new daq();,
  time_t time_check;,

// odpremo datoteko za pisanje
  FILE *fp=fopen(fname,"w");

  d->start();
  ieve=0;
  
  while((ieve<neve)&&(!ctrlc)){
    nc=d->event(data,BSIZE);
    nb=0;
    while((nc>0)&&(ieve++<neve)&&(!ctrlc)){
      // zapis v datoteko   
      hdr[2]=time(NULL);
      hdr[3]=ieve;
      fwrite(hdr,sizeof(int),4 ,fp); 
      fwrite(&data[nb],sizeof(int),(NTDCCH+NADCCH),fp);
//      DBG(
        for(i=0;i<(NTDCCH+NADCCH);i++){
          adc=data[nb+i]&0xFFFF;        
          if(i % 2 == 0)
printf(/*"nev=%4d %d. TDC data=%d\n"*/"%d\t"/*,ieve,i*//*/2*/,adc);
//            printf("nev=%4d %d. TDC data=%d\n",ieve,i/2,adc);
          else if(i % 2 == 1)
printf(/*"nev=%4d %d. TDC data=%d\n"*/"%d\t"/*,ieve,i*//*/2*/,adc);
//            printf("nev=%4d %d. ADC data=%d\n",ieve,i/2,adc);
        }
printf("\n");
//      )
      nb+=(NTDCCH+NADCCH);
      nc-=(NTDCCH+NADCCH);
      if (!(ieve%1000)) printf("event no. -> %d\n",ieve);
    };
  };
   
  d->stop();
  fclose(fp);
  printf("Podatki so v datoteki %s\n", fname);
  delete d;

  return 0;
}
#endif