Subversion Repositories f9daq

Rev

Rev 52 | Blame | Compare with Previous | Last modification | View Log | RSS feed

  1. /*!
  2.         -----------------------------------------------------------------------------
  3.  
  4.                        --- CAEN SpA - Computing Systems Division ---
  5.  
  6.         -----------------------------------------------------------------------------
  7.  
  8.         CAENVMElib.h
  9.  
  10.         -----------------------------------------------------------------------------
  11.  
  12.         Created: March 2004
  13.  
  14.         -----------------------------------------------------------------------------
  15. */
  16. #ifndef __CAENVMELIB_H
  17. #define __CAENVMELIB_H
  18.  
  19. #include <stdio.h>
  20. // Rev. 2.5
  21. #ifdef LINUX
  22.         #include <stdint.h>
  23. #endif
  24. #include <stdlib.h>
  25. #ifndef _CVI_
  26. #include <malloc.h>
  27. #endif
  28. #include "CAENVMEoslib.h"
  29. #include "CAENVMEtypes.h"
  30.  
  31. #ifdef WIN32
  32. #ifndef  _CVI_
  33.  
  34.         typedef INT8   int8_t;
  35.         typedef UINT8  uint8_t;
  36.         typedef INT16  int16_t;
  37.         typedef UINT16 uint16_t;
  38.         typedef INT32  int32_t;
  39.         typedef UINT32 uint32_t;
  40.         typedef INT64  int64_t;
  41.         typedef UINT64 uint64_t;
  42. #endif
  43. #endif
  44.  
  45. #ifdef __cplusplus
  46. extern "C" {
  47. #endif // __cplusplus
  48. /*
  49.         CAENVME_DecodeError
  50.         -----------------------------------------------------------------------------
  51.         Parameters:
  52.                 [in]  Code      : The error code to decode.
  53.         -----------------------------------------------------------------------------
  54.         Returns:
  55.                 An string describing the error condition.
  56.         -----------------------------------------------------------------------------
  57.         Description:
  58.                 Decode the error.
  59. */
  60. const char *
  61. #ifdef WIN32
  62. __stdcall
  63. #endif
  64. CAENVME_DecodeError(CVErrorCodes Code);
  65.  
  66. /*
  67.         CAENVME_API CAENVME_SWRelease
  68.         -----------------------------------------------------------------------------
  69.         Parameters:
  70.                 [out] SwRel     : Returns the software release of the library.
  71.         -----------------------------------------------------------------------------
  72.         Returns:
  73.                 An error code about the execution of the function.
  74.         -----------------------------------------------------------------------------
  75.         Description:
  76.                 Permits to read the software release of the library.
  77. */
  78. CAENVME_API
  79. CAENVME_SWRelease(char *SwRel);
  80.  
  81. /*
  82.         CAENVME_BoardFWRelease.
  83.         -----------------------------------------------------------------------------
  84.         Parameters:
  85.                 [in]  Handle    : The handle that identifies the device.
  86.                 [out] FWRel     : Returns the firmware release of the device.
  87.         -----------------------------------------------------------------------------
  88.         Returns:
  89.                 An error code about the execution of the function.
  90.         -----------------------------------------------------------------------------
  91.         Description:
  92.                 Permits to read the firmware release loaded into the device.
  93. */
  94. CAENVME_API
  95. CAENVME_BoardFWRelease(int32_t Handle, char *FWRel);
  96.  
  97. /*
  98.         CAENVME_DriverRelease.
  99.         -----------------------------------------------------------------------------
  100.         Parameters:
  101.                 [in]  Handle    : The handle that identifies the device.
  102.                 [out] Rel       : Returns the software release of the device driver
  103.         -----------------------------------------------------------------------------
  104.         Returns:
  105.                 An error code about the execution of the function.
  106.         -----------------------------------------------------------------------------
  107.         Description:
  108.                 Permits to read the software release of the device driver.
  109. */
  110. CAENVME_API
  111. CAENVME_DriverRelease(int32_t Handle, char *Rel);
  112.  
  113. /*
  114.         CAENVME_DeviceReset
  115.         -----------------------------------------------------------------------------
  116.         Parameters:
  117.                 [in]  Handle    : The handle that identifies the device.
  118.         -----------------------------------------------------------------------------
  119.         Returns:
  120.                 An error code about the execution of the function.
  121.         -----------------------------------------------------------------------------
  122.         Description:
  123.                 Permits to reset the device.
  124.                 Implemented for A2818, A2719, V2718 on Linux platform only
  125. */
  126. CAENVME_API
  127. CAENVME_DeviceReset(int32_t dev);
  128.  
  129.  
  130. /*
  131.         CAENVME_Init
  132.         -----------------------------------------------------------------------------
  133.         Parameters:
  134.                 [in]  BdType    : The model of the bridge (V1718/V2718).
  135.                 [in]  Link      : The link number (don't care for V1718).
  136.                 [in]  BdNum     : The board number in the link.
  137.                 [out] Handle    : The handle that identifies the device.
  138.         -----------------------------------------------------------------------------
  139.         Returns:
  140.                 An error code about the execution of the function.
  141.         -----------------------------------------------------------------------------
  142.         Description:
  143.                 The function generates an opaque handle to identify a module
  144.                 attached to the PC. In the case of V1718 bridge it must be
  145.                 specified only the module index (BdNum) because the link is USB.
  146.                 In the case of V2718 it must be specified also the link because
  147.                 you can have some A2818 optical link inside the PC.
  148. */
  149. CAENVME_API
  150. CAENVME_Init(CVBoardTypes BdType, short Link, short BdNum, int32_t *Handle);
  151.  
  152. /*
  153.         CAENVME_End
  154.         -----------------------------------------------------------------------------
  155.         Parameters:
  156.                 [in]  Handle    : The handle that identifies the device.
  157.         -----------------------------------------------------------------------------
  158.         Returns:
  159.                 An error code about the execution of the function.
  160.         -----------------------------------------------------------------------------
  161.         Description:
  162.                 Notifies the library the end of work and free the allocated
  163.                 resources.
  164. */
  165. CAENVME_API
  166. CAENVME_End(int32_t Handle);
  167.  
  168. /*
  169.         CAENVME_ReadCycle
  170.         -----------------------------------------------------------------------------
  171.         Parameters:
  172.                 [in]  Handle    : The handle that identifies the device.
  173.                 [in]  Address   : The VME bus address.
  174.                 [out] Data      : The data read from the VME bus.
  175.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  176.                 [in]  DW        : The data width.(see CVDataWidth enum).
  177.         -----------------------------------------------------------------------------
  178.         Returns:
  179.                 An error code about the execution of the function.
  180.         -----------------------------------------------------------------------------
  181.         Description:
  182.                 The function performs a single VME read cycle.
  183. */
  184. CAENVME_API
  185. CAENVME_ReadCycle(int32_t Handle, uint32_t Address, void *Data,
  186.                   CVAddressModifier AM, CVDataWidth DW);
  187.  
  188. /*
  189.         CAENVME_RMWCycle
  190.         -----------------------------------------------------------------------------
  191.         Parameters:
  192.                 [in]     Handle : The handle that identifies the device.
  193.                 [in]     Address: The VME bus address.
  194.                 [in/out] Data   : The data read and then written to the VME bus.
  195.                 [in]     AM     : The address modifier (see CVAddressModifier enum).
  196.                 [in]     DW     : The data width.(see CVDataWidth enum).
  197.         -----------------------------------------------------------------------------
  198.         Returns:
  199.                 An error code about the execution of the function.
  200.         -----------------------------------------------------------------------------
  201.         Description:
  202.                 The function performs a Read-Modify-Write cycle. The Data parameter
  203.                 is bidirectional: it is used to write the value to the VME bus and to
  204.                 return the value read.
  205. */
  206. CAENVME_API
  207. CAENVME_RMWCycle(int32_t Handle, uint32_t Address,  void *Data,
  208.                  CVAddressModifier AM, CVDataWidth DW);
  209.  
  210. /*
  211.         CAENVME_WriteCycle
  212.         -----------------------------------------------------------------------------
  213.         Parameters:
  214.                 [in]  Handle    : The handle that identifies the device.
  215.                 [in]  Address   : The VME bus address.
  216.                 [in]  Data      : The data written to the VME bus.
  217.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  218.                 [in]  DW        : The data width.(see CVDataWidth enum).
  219.         -----------------------------------------------------------------------------
  220.         Returns:
  221.                 An error code about the execution of the function.
  222.         -----------------------------------------------------------------------------
  223.         Description:
  224.                 The function performs a single VME write cycle.
  225. */
  226. CAENVME_API
  227. CAENVME_WriteCycle(int32_t Handle, uint32_t Address, void *Data,
  228.                    CVAddressModifier AM, CVDataWidth DW);
  229.  
  230. /*
  231.         CAENVME_MultiRead (Ver. 2.2)
  232.         -----------------------------------------------------------------------------
  233.         Parameters:
  234.                 [in]  Handle    : The handle that identifies the device.
  235.                 [in]  Addrs     : The VME bus addresses.
  236.                 [out] Buffer    : The data read from the VME bus.
  237.                 [in]  NCycles   : The number of read cycles to perform.
  238.                 [in]  AMs       : The address modifiers (see CVAddressModifier enum).
  239.                 [in]  DWs       : The data widths.(see CVDataWidth enum).
  240.                 [out] ECs       : The error codes relaive to each cycle.
  241.         -----------------------------------------------------------------------------
  242.         Returns:
  243.                 An error code about the execution of the function.
  244.         -----------------------------------------------------------------------------
  245.         Description:
  246.                 The function performs a block of single VME read cycles.
  247. */
  248. CAENVME_API
  249. CAENVME_MultiRead(int32_t Handle, uint32_t *Addrs, uint32_t *Buffer,
  250.         int NCycles, CVAddressModifier *AMs, CVDataWidth *DWs, CVErrorCodes *ECs);
  251.  
  252. /*
  253.         CAENVME_MultiWrite (Ver. 2.2)
  254.         -----------------------------------------------------------------------------
  255.         Parameters:
  256.                 [in]  Handle    : The handle that identifies the device.
  257.                 [in]  Addrs     : The VME bus addresses.
  258.                 [in]  Buffer    : The data to write to the VME bus.
  259.                 [in]  NCycles   : The number of read cycles to perform.
  260.                 [in]  AMs       : The address modifiers (see CVAddressModifier enum).
  261.                 [in]  DWs       : The data widths.(see CVDataWidth enum).
  262.                 [out] ECs       : The error codes relaive to each cycle.
  263.         -----------------------------------------------------------------------------
  264.         Returns:
  265.                 An error code about the execution of the function.
  266.         -----------------------------------------------------------------------------
  267.         Description:
  268.                 The function performs a block of single VME write cycles.
  269. */
  270. CAENVME_API
  271. CAENVME_MultiWrite(int32_t Handle, uint32_t *Addrs, uint32_t *Buffer,
  272.         int NCycles, CVAddressModifier *AMs, CVDataWidth *DWs, CVErrorCodes *ECs);
  273.  
  274. /*
  275.         CAENVME_BLTReadCycle
  276.         -----------------------------------------------------------------------------
  277.         Parameters:
  278.                 [in]  Handle    : The handle that identifies the device.
  279.                 [in]  Address   : The VME bus address.
  280.                 [out] Buffer    : The data read from the VME bus.
  281.                 [in]  Size      : The size of the transfer in bytes.
  282.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  283.                 [in]  DW        : The data width.(see CVDataWidth enum).
  284.                 [out] count     : The number of bytes transferred.
  285.         -----------------------------------------------------------------------------
  286.         Returns:
  287.                 An error code about the execution of the function.
  288.         -----------------------------------------------------------------------------
  289.         Description:
  290.                 The function performs a VME block transfer read cycle. It can be used to
  291.                 perform MBLT transfers using 64 bit data width.
  292. */
  293. CAENVME_API
  294. CAENVME_BLTReadCycle(int32_t Handle, uint32_t Address, void *Buffer,
  295.                      int Size, CVAddressModifier AM, CVDataWidth DW, int *count);
  296.  
  297. /*
  298.         Ver. 2.3 - New function
  299.  
  300.         CAENVME_FIFOBLTReadCycle
  301.         -----------------------------------------------------------------------------
  302.         Parameters:
  303.                 [in]  Handle    : The handle that identifies the device.
  304.                 [in]  Address   : The VME bus address.
  305.                 [out] Buffer    : The data read from the VME bus.
  306.                 [in]  Size      : The size of the transfer in bytes.
  307.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  308.                 [in]  DW        : The data width.(see CVDataWidth enum).
  309.                 [out] count     : The number of bytes transferred.
  310.         -----------------------------------------------------------------------------
  311.         Returns:
  312.                 An error code about the execution of the function.
  313.         -----------------------------------------------------------------------------
  314.         Description:
  315.                 The function performs a VME block transfer read cycle. It can be used to
  316.                 perform MBLT transfers using 64 bit data width. The Address is not
  317.                 incremented on the VMEBus during the cycle.
  318. */
  319. CAENVME_API
  320. CAENVME_FIFOBLTReadCycle(int32_t Handle, uint32_t Address, void *Buffer,
  321.                          int Size, CVAddressModifier AM, CVDataWidth DW, int *count);
  322.  
  323. /*
  324.         CAENVME_MBLTReadCycle
  325.         -----------------------------------------------------------------------------
  326.         Parameters:
  327.                 [in]  Handle    : The handle that identifies the device.
  328.                 [in]  Address   : The VME bus address.
  329.                 [out] Buffer    : The data read from the VME bus.
  330.                 [in]  Size      : The size of the transfer in bytes.
  331.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  332.                 [out] count     : The number of bytes transferred.
  333.         -----------------------------------------------------------------------------
  334.         Returns:
  335.                 An error code about the execution of the function.
  336.         -----------------------------------------------------------------------------
  337.         Description:
  338.                 The function performs a VME multiplexed block transfer read cycle.
  339. */
  340. CAENVME_API
  341. CAENVME_MBLTReadCycle(int32_t Handle, uint32_t Address, void *Buffer,
  342.                       int Size, CVAddressModifier AM, int *count);
  343.  
  344. /*
  345.         Ver. 2.3 - New function
  346.        
  347.         CAENVME_FIFOMBLTReadCycle
  348.         -----------------------------------------------------------------------------
  349.         Parameters:
  350.                 [in]  Handle    : The handle that identifies the device.
  351.                 [in]  Address   : The VME bus address.
  352.                 [out] Buffer    : The data read from the VME bus.
  353.                 [in]  Size      : The size of the transfer in bytes.
  354.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  355.                 [out] count     : The number of bytes transferred.
  356.         -----------------------------------------------------------------------------
  357.         Returns:
  358.                 An error code about the execution of the function.
  359.         -----------------------------------------------------------------------------
  360.         Description:
  361.                 The function performs a VME multiplexed block transfer read cycle.
  362.                 The Address is not incremented on the VMEBus during the cycle.
  363. */
  364. CAENVME_API
  365. CAENVME_FIFOMBLTReadCycle(int32_t Handle, uint32_t Address, void *Buffer,
  366.                           int Size, CVAddressModifier AM, int *count);
  367.  
  368. /*
  369.         CAENVME_BLTWriteCycle
  370.         -----------------------------------------------------------------------------
  371.         Parameters:
  372.                 [in]  Handle    : The handle that identifies the device.
  373.                 [in]  Address   : The VME bus address.
  374.                 [in]  Buffer    : The data to be written to the VME bus.
  375.                 [in]  Size      : The size of the transfer in bytes.
  376.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  377.                 [in]  DW        : The data width.(see CVDataWidth enum).
  378.                 [out] count     : The number of bytes transferred.
  379.         -----------------------------------------------------------------------------
  380.         Returns:
  381.                 An error code about the execution of the function.
  382.         -----------------------------------------------------------------------------
  383.         Description:
  384.                 The function performs a VME block transfer write cycle.
  385. */
  386. CAENVME_API
  387. CAENVME_BLTWriteCycle(int32_t Handle, uint32_t Address, void *Buffer,
  388.                       int size, CVAddressModifier AM, CVDataWidth DW, int *count);
  389.  
  390. /*
  391.         Ver. 2.3 - New function
  392.  
  393.         CAENVME_FIFOBLTWriteCycle
  394.         -----------------------------------------------------------------------------
  395.         Parameters:
  396.                 [in]  Handle    : The handle that identifies the device.
  397.                 [in]  Address   : The VME bus address.
  398.                 [in]  Buffer    : The data to be written to the VME bus.
  399.                 [in]  Size      : The size of the transfer in bytes.
  400.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  401.                 [in]  DW        : The data width.(see CVDataWidth enum).
  402.                 [out] count     : The number of bytes transferred.
  403.         -----------------------------------------------------------------------------
  404.         Returns:
  405.                 An error code about the execution of the function.
  406.         -----------------------------------------------------------------------------
  407.         Description:
  408.                 The function performs a VME block transfer write cycle. The address
  409.                 is not incremented during the cycle.
  410. */
  411. CAENVME_API
  412. CAENVME_FIFOBLTWriteCycle(int32_t Handle, uint32_t Address, void *Buffer,
  413.                       int size, CVAddressModifier AM, CVDataWidth DW, int *count);
  414.  
  415. /*
  416.         CAENVME_MBLTWriteCycle
  417.         -----------------------------------------------------------------------------
  418.         Parameters:
  419.                 [in]  Handle    : The handle that identifies the device.
  420.                 [in]  Address   : The VME bus address.
  421.                 [in]  Buffer    : The data to be written to the VME bus.
  422.                 [in]  Size      : The size of the transfer in bytes.
  423.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  424.                 [out] count     : The number of bytes transferred.
  425.         -----------------------------------------------------------------------------
  426.         Returns:
  427.                 An error code about the execution of the function.
  428.         -----------------------------------------------------------------------------
  429.         Description:
  430.                 The function performs a VME multiplexed block transfer write cycle.
  431. */
  432. CAENVME_API
  433. CAENVME_MBLTWriteCycle(int32_t Handle, uint32_t Address, void *Buffer,
  434.                        int size, CVAddressModifier AM, int *count);
  435.  
  436. /*
  437.         Ver. 2.3 - New function
  438.        
  439.         CAENVME_FIFOMBLTWriteCycle
  440.         -----------------------------------------------------------------------------
  441.         Parameters:
  442.                 [in]  Handle    : The handle that identifies the device.
  443.                 [in]  Address   : The VME bus address.
  444.                 [in]  Buffer    : The data to be written to the VME bus.
  445.                 [in]  Size      : The size of the transfer in bytes.
  446.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  447.                 [out] count     : The number of bytes transferred.
  448.         -----------------------------------------------------------------------------
  449.         Returns:
  450.                 An error code about the execution of the function.
  451.         -----------------------------------------------------------------------------
  452.         Description:
  453.                 The function performs a VME multiplexed block transfer write cycle.
  454.                 The address is not incremented during the cycle.
  455. */
  456. CAENVME_API
  457. CAENVME_FIFOMBLTWriteCycle(int32_t Handle, uint32_t Address, void *Buffer,
  458.                            int size, CVAddressModifier AM, int *count);
  459.  
  460. /*
  461.         CAENVME_ADOCycle
  462.         -----------------------------------------------------------------------------
  463.         Parameters:
  464.                 [in]  Handle    : The handle that identifies the device.
  465.                 [in]  Address   : The VME bus address.
  466.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  467.         -----------------------------------------------------------------------------
  468.         Returns:
  469.                 An error code about the execution of the function.
  470.         -----------------------------------------------------------------------------
  471.         Description:
  472.                 The function performs a VME address only cycle. It can be used to
  473.                 perform MBLT transfers using 64 bit data width.
  474. */
  475. CAENVME_API
  476. CAENVME_ADOCycle(int32_t Handle, uint32_t Address, CVAddressModifier AM);
  477.  
  478. /*
  479.         CAENVME_ADOHCycle
  480.         -----------------------------------------------------------------------------
  481.         Parameters:
  482.                 [in]  Handle    : The handle that identifies the device.
  483.                 [in]  Address   : The VME bus address.
  484.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  485.         -----------------------------------------------------------------------------
  486.         Returns:
  487.                 An error code about the execution of the function.
  488.         -----------------------------------------------------------------------------
  489.         Description:
  490.                 The function performs a VME address only with handshake cycle.
  491. */
  492. CAENVME_API
  493. CAENVME_ADOHCycle(int32_t Handle, uint32_t Address, CVAddressModifier AM);
  494.  
  495. /*
  496.         CAENVME_IACKCycle
  497.         -----------------------------------------------------------------------------
  498.         Parameters:
  499.                 [in]  Handle    : The handle that identifies the device.
  500.                 [in]  Level     : The IRQ level to acknowledge (see CVIRQLevels enum).
  501.                 [in]  DW        : The data width.(see CVDataWidth enum).
  502.         -----------------------------------------------------------------------------
  503.         Returns:
  504.                 An error code about the execution of the function.
  505.         -----------------------------------------------------------------------------
  506.         Description:
  507.                 The function performs a VME interrupt acknowledge cycle.
  508. */
  509. CAENVME_API
  510. CAENVME_IACKCycle(int32_t Handle, CVIRQLevels Level, void *Vector, CVDataWidth DW);
  511.  
  512. /*
  513.         CAENVME_IRQCheck
  514.         -----------------------------------------------------------------------------
  515.         Parameters:
  516.                 [in]  Handle    : The handle that identifies the device.
  517.                 [out] Mask      : A bit-mask indicating the active IRQ lines.
  518.         -----------------------------------------------------------------------------
  519.         Returns:
  520.                 An error code about the execution of the function.
  521.         -----------------------------------------------------------------------------
  522.         Description:
  523.                 The function returns a bit mask indicating the active IRQ lines.
  524. */
  525. CAENVME_API
  526. CAENVME_IRQCheck(int32_t Handle, CAEN_BYTE *Mask);
  527.  
  528. /*
  529.         CAENVME_IRQEnable
  530.         -----------------------------------------------------------------------------
  531.         Parameters:
  532.                 [in]  Handle    : The handle that identifies the device.
  533.                 [in]  Mask      : A bit-mask indicating the IRQ lines.
  534.         -----------------------------------------------------------------------------
  535.         Returns:
  536.                 An error code about the execution of the function.
  537.         -----------------------------------------------------------------------------
  538.         Description:
  539.                 The function enables the IRQ lines specified by Mask.
  540. */
  541. CAENVME_API
  542. CAENVME_IRQEnable(int32_t Handle, uint32_t Mask);
  543.  
  544. /*
  545.         CAENVME_IRQDisable
  546.         -----------------------------------------------------------------------------
  547.         Parameters:
  548.                 [in]  Handle    : The handle that identifies the device.
  549.                 [in]  Mask      : A bit-mask indicating the IRQ lines.
  550.         -----------------------------------------------------------------------------
  551.         Returns:
  552.                 An error code about the execution of the function.
  553.         -----------------------------------------------------------------------------
  554.         Description:
  555.                 The function disables the IRQ lines specified by Mask.
  556. */
  557. CAENVME_API
  558. CAENVME_IRQDisable(int32_t Handle, uint32_t Mask);
  559.  
  560. /*
  561.         CAENVME_IRQWait
  562.         -----------------------------------------------------------------------------
  563.         Parameters:
  564.                 [in]  Handle    : The handle that identifies the device.
  565.                 [in]  Mask      : A bit-mask indicating the IRQ lines.
  566.                 [in]  Timeout   : Timeout in milliseconds.
  567.         -----------------------------------------------------------------------------
  568.         Returns:
  569.                 An error code about the execution of the function.
  570.         -----------------------------------------------------------------------------
  571.         Description:
  572.                 The function wait the IRQ lines specified by Mask until one of
  573.                 them raise or timeout expires.
  574. */
  575. CAENVME_API
  576. CAENVME_IRQWait(int32_t Handle, uint32_t Mask, uint32_t Timeout);
  577.  
  578. /*
  579.         CAENVME_SetPulserConf
  580.         -----------------------------------------------------------------------------
  581.         Parameters:
  582.                 [in]  Handle    : The handle that identifies the device.
  583.                 [in]  PulSel    : The pulser to configure (see CVPulserSelect enum).
  584.                 [in]  Period    : The period of the pulse in time units.
  585.                 [in]  Width     : The width of the pulse in time units.
  586.                 [in]  Unit      : The time unit for the pulser configuration (see
  587.                                   CVTimeUnits enum).
  588.                 [in]  PulseNo   : The number of pulses to generate (0 = infinite).
  589.                 [in]  Start     : The source signal to start the pulse burst (see
  590.                                   CVIOSources enum).
  591.                 [in]  Reset     : The source signal to stop the pulse burst (see
  592.                                   CVIOSources enum).
  593.         -----------------------------------------------------------------------------
  594.         Returns:
  595.                 An error code about the execution of the function.
  596.         -----------------------------------------------------------------------------
  597.         Description:
  598.                 The function permits to configure the pulsers. All the timing parameters
  599.                 are expressed in the time units specified. The start signal source can be
  600.                 one of: front panel button or software (cvManualSW), input signal 0
  601.                 (cvInputSrc0),input signal 1 (cvInputSrc1) or input coincidence
  602.                 (cvCoincidence). The reset signal source can be: front panel button or
  603.                 software (cvManualSW) or, for pulser A the input signal 0 (cvInputSrc0),
  604.                 for pulser B the input signal 1 (cvInputSrc1).
  605. */
  606. CAENVME_API
  607. CAENVME_SetPulserConf(int32_t Handle, CVPulserSelect PulSel, unsigned char Period,
  608.                       unsigned char Width, CVTimeUnits Unit, unsigned char PulseNo,
  609.                       CVIOSources Start, CVIOSources Reset);
  610.  
  611. /*
  612.         CAENVME_SetScalerConf
  613.         -----------------------------------------------------------------------------
  614.         Parameters:
  615.                 [in]  Handle    : The handle that identifies the device.
  616.                 [in]  Limit     : The counter limit for the scaler.
  617.                 [in]  AutoReset : Enable/disable the counter auto reset.
  618.                 [in]  Hit       : The source signal for the signal to count (see
  619.                                   CVIOSources enum).
  620.                 [in]  Gate      : The source signal for the gate (see CVIOSources enum).
  621.                 [in]  Reset     : The source signal to stop the counter (see
  622.                                   CVIOSources enum).
  623.         -----------------------------------------------------------------------------
  624.         Returns:
  625.                 An error code about the execution of the function.
  626.         -----------------------------------------------------------------------------
  627.         Description:
  628.                 The function permits to configure the scaler. Limit range is 0 - 1024
  629.                 (10 bit). The hit signal source can be: input signal 0 (cvInputSrc0)
  630.                 or input coincidence (cvCoincidence). The gate signal source can be:
  631.                 front panel button or software (cvManualSW) or input signal 1
  632.                 (cvInputSrc1). The reset signal source can be: front panel button or
  633.                 software (cvManualSW) or input signal 1 (cvInputSrc1).
  634. */
  635. CAENVME_API
  636. CAENVME_SetScalerConf(int32_t Handle, short Limit, short AutoReset,
  637.                       CVIOSources Hit, CVIOSources Gate, CVIOSources Reset);
  638.  
  639. /*
  640.         CAENVME_SetOutputConf
  641.         -----------------------------------------------------------------------------
  642.         Parameters:
  643.                 [in]  Handle    : The handle that identifies the device.
  644.                 [in]  OutSel    : The output line to configure (see CVOutputSelect
  645.                                   enum).
  646.                 [in]  OutPol    : The output line polarity (see CVIOPolarity enum).
  647.                 [in]  LEDPol    : The output LED polarity (see CVLEDPolarity enum).
  648.                 [in]  Source    : The source signal to propagate to the output line
  649.                                   (see CVIOSources enum).
  650.         -----------------------------------------------------------------------------
  651.         Returns:
  652.                 An error code about the execution of the function.
  653.         -----------------------------------------------------------------------------
  654.         Description:
  655.                 The function permits to configure the output lines of the module. It
  656.                 can be specified the polarity for the line and for the LED. The
  657.                 output line source depends on the line as figured out by the
  658.                 following table:
  659.  
  660.                 +-----------------------------------------------------------+
  661.                 !           S O U R C E      S E L E C T I O N              !
  662.                 +--------------+---------------+---------------+------------+
  663.                 ! cvVMESignals ! cvCoincidence ! cvMiscSignals ! cvManualSW !
  664.         +---+---+--------------+---------------+---------------+------------+
  665.         !   ! 0 !      DS      ! Input Coinc.  !   Pulser A    ! Manual/SW  !
  666.         ! O +---+--------------+---------------+---------------+------------+
  667.         ! U ! 1 !      AS      ! Input Coinc.  !   Pulser A    ! Manual/SW  !
  668.         ! T +---+--------------+---------------+---------------+------------+
  669.         ! P ! 2 !    DTACK     ! Input Coinc.  !   Pulser B    ! Manual/SW  !
  670.         ! U +---+--------------+---------------+---------------+------------+
  671.         ! T ! 3 !     BERR     ! Input Coinc.  !   Pulser B    ! Manual/SW  !
  672.         !   +---+--------------+---------------+---------------+------------+
  673.         !   ! 4 !     LMON     ! Input Coinc.  !  Scaler end   ! Manual/SW  !
  674.         +---+---+--------------+---------------+---------------+------------+
  675. */
  676. CAENVME_API
  677. CAENVME_SetOutputConf(int32_t Handle, CVOutputSelect OutSel, CVIOPolarity OutPol,
  678.                       CVLEDPolarity LEDPol, CVIOSources Source);
  679.  
  680. /*
  681.         CAENVME_SetInputConf
  682.         -----------------------------------------------------------------------------
  683.         Parameters:
  684.                 [in]  Handle    : The handle that identifies the device.
  685.                 [in]  InSel     : The input line to configure (see CVInputSelect enum).
  686.                 [in]  InPol     : The input line polarity (see CVIOPolarity enum).
  687.                 [in]  LEDPol    : The output LED polarity (see CVLEDPolarity enum).
  688.         -----------------------------------------------------------------------------
  689.         Returns:
  690.                 An error code about the execution of the function.
  691.         -----------------------------------------------------------------------------
  692.         Description:
  693.                 The function permits to configure the input lines of the module. It
  694.                 ca be specified the polarity for the line and for the LED.
  695. */
  696. CAENVME_API
  697. CAENVME_SetInputConf(int32_t Handle, CVInputSelect InSel, CVIOPolarity InPol,
  698.                      CVLEDPolarity LEDPol);
  699.  
  700. /*
  701.         CAENVME_GetPulserConf
  702.         -----------------------------------------------------------------------------
  703.         Parameters:
  704.                 [in]  Handle    : The handle that identifies the device.
  705.                 [in]  PulSel    : The pulser to configure (see CVPulserSelect enum).
  706.                 [out] Period    : The period of the pulse in time units.
  707.                 [out] Width     : The width of the pulse in time units.
  708.                 [out] Unit      : The time unit for the pulser configuration (see
  709.                                   CVTimeUnits enum).
  710.                 [out] PulseNo   : The number of pulses to generate (0 = infinite).
  711.                 [out] Start     : The source signal to start the pulse burst (see
  712.                                   CVIOSources enum).
  713.                 [out] Reset     : The source signal to stop the pulse burst (see
  714.                                   CVIOSources enum).
  715.         -----------------------------------------------------------------------------
  716.         Returns:
  717.                 An error code about the execution of the function.
  718.         -----------------------------------------------------------------------------
  719.         Description:
  720.                 The function permits to read the configuration of the pulsers.
  721. */
  722. CAENVME_API
  723. CAENVME_GetPulserConf(int32_t Handle, CVPulserSelect PulSel, unsigned char *Period,
  724.                       unsigned char *Width, CVTimeUnits *Unit, unsigned char *PulseNo,
  725.                       CVIOSources *Start, CVIOSources *Reset);
  726.  
  727. /*
  728.         CAENVME_GetScalerConf
  729.         -----------------------------------------------------------------------------
  730.         Parameters:
  731.                 [in]  Handle    : The handle that identifies the device.
  732.                 [out] Limit     : The counter limit for the scaler.
  733.                 [out] AutoReset : The auto reset configuration.
  734.                 [out] Hit       : The source signal for the signal to count (see
  735.                                   CVIOSources enum).
  736.                 [out] Gate      : The source signal for the gate (see CVIOSources enum).
  737.                 [out] Reset     : The source signal to stop the counter (see
  738.                                   CVIOSources enum).
  739.         -----------------------------------------------------------------------------
  740.         Returns:
  741.                 An error code about the execution of the function.
  742.         -----------------------------------------------------------------------------
  743.         Description:
  744.                 The function permits to read the configuration of the scaler.
  745. */
  746. CAENVME_API
  747. CAENVME_GetScalerConf(int32_t Handle, short *Limit, short *AutoReset,
  748.                       CVIOSources *Hit, CVIOSources *Gate, CVIOSources *Reset);
  749.  
  750.  
  751. /*
  752.         CAENVME_SetOutputConf
  753.         -----------------------------------------------------------------------------
  754.         Parameters:
  755.                 [in]  Handle    : The handle that identifies the device.
  756.                 [in]  OutSel    : The output line to configure (see CVOutputSelect enum).
  757.                 [out] OutPol    : The output line polarity (see CVIOPolarity enum).
  758.                 [out] LEDPol    : The output LED polarity (see CVLEDPolarity enum).
  759.                 [out] Source    : The source signal to propagate to the output line (see
  760.                                   CVIOSources enum).
  761.         -----------------------------------------------------------------------------
  762.         Returns:
  763.                 An error code about the execution of the function.
  764.         -----------------------------------------------------------------------------
  765.         Description:
  766.                 The function permits to read the configuration of the output lines.
  767. */
  768. CAENVME_API
  769. CAENVME_GetOutputConf(int32_t Handle, CVOutputSelect OutSel, CVIOPolarity *OutPol,
  770.                       CVLEDPolarity *LEDPol, CVIOSources *Source);
  771.  
  772. /*
  773.         CAENVME_SetInputConf
  774.         -----------------------------------------------------------------------------
  775.         Parameters:
  776.                 [in]  Handle    : The handle that identifies the device.
  777.                 [in]  InSel     : The input line to configure (see CVInputSelect enum).
  778.                 [out] InPol     : The input line polarity (see CVIOPolarity enum).
  779.                 [out] LEDPol    : The output LED polarity (see CVLEDPolarity enum).
  780.         -----------------------------------------------------------------------------
  781.         Returns:
  782.                 An error code about the execution of the function.
  783.         -----------------------------------------------------------------------------
  784.         Description:
  785.                 The function permits to read the configuration of the input lines.
  786. */
  787. CAENVME_API
  788. CAENVME_GetInputConf(int32_t Handle, CVInputSelect InSel, CVIOPolarity *InPol,
  789.                      CVLEDPolarity *LEDPol);
  790.  
  791. /*
  792.         CAENVME_ReadRegister
  793.         -----------------------------------------------------------------------------
  794.         Parameters:
  795.                 [in]  Handle    : The handle that identifies the device.
  796.                 [in]  Reg       : The internal register to read (see CVRegisters enum).
  797.                 [out] Data      : The data read from the module.
  798.         -----------------------------------------------------------------------------
  799.         Returns:
  800.                 An error code about the execution of the function.
  801.         -----------------------------------------------------------------------------
  802.         Description:
  803.                 The function permits to read all internal registers.
  804. */
  805. CAENVME_API
  806. CAENVME_ReadRegister(int32_t Handle, CVRegisters Reg, unsigned int *Data);
  807.  
  808. /*
  809.         CAENVME_WriteRegister
  810.         -----------------------------------------------------------------------------
  811.         Parameters:
  812.                 [in]  Handle    : The handle that identifies the device.
  813.                 [in]  Reg       : The internal register to read (see CVRegisters enum).
  814.                 [in]  Data      : The data to be written to the module.
  815.         -----------------------------------------------------------------------------
  816.         Returns:
  817.                 An error code about the execution of the function.
  818.         -----------------------------------------------------------------------------
  819.         Description:
  820.                 The function permits to write to all internal registers.
  821. */
  822. CAENVME_API
  823. CAENVME_WriteRegister(int32_t Handle, CVRegisters Reg, unsigned int Data);
  824.  
  825. /*
  826.         CAENVME_SetOutputRegister
  827.         -----------------------------------------------------------------------------
  828.         Parameters:
  829.                 [in]  Handle    : The handle that identifies the device.
  830.                 [in]  Mask      : The lines to be set.
  831.         -----------------------------------------------------------------------------
  832.         Returns:
  833.                 An error code about the execution of the function.
  834.         -----------------------------------------------------------------------------
  835.         Description:
  836.                 The function sets the lines specified. Refer the CVOutputRegisterBits
  837.                 enum to compose and decoding the bit mask.
  838. */
  839. CAENVME_API
  840. CAENVME_SetOutputRegister(int32_t Handle, unsigned short Mask);
  841.  
  842. /*
  843.         CAENVME_ClearOutputRegister
  844.         -----------------------------------------------------------------------------
  845.         Parameters:
  846.                 [in]  Handle    : The handle that identifies the device.
  847.                 [in]  Mask      : The IRQ lines to be cleared.
  848.         -----------------------------------------------------------------------------
  849.         Returns:
  850.                 An error code about the execution of the function.
  851.         -----------------------------------------------------------------------------
  852.         Description:
  853.                 The function clears the lines specified. Refer the CVOutputRegisterBits
  854.                 enum to compose and decoding the bit mask.
  855. */
  856. CAENVME_API
  857. CAENVME_ClearOutputRegister(int32_t Handle, unsigned short Mask);
  858.  
  859. /*
  860.         CAENVME_PulseOutputRegister
  861.         -----------------------------------------------------------------------------
  862.         Parameters:
  863.                 [in]  Handle    : The handle that identifies the device.
  864.                 [in]  Mask      : The lines to be pulsed.
  865.         -----------------------------------------------------------------------------
  866.         Returns:
  867.                 An error code about the execution of the function.
  868.         -----------------------------------------------------------------------------
  869.         Description:
  870.                 The function produces a pulse with the lines specified by setting and
  871.                 then clearing them. Refer the CVOutputRegisterBits enum to compose and
  872.                 decoding the bit mask.
  873. */
  874. CAENVME_API
  875. CAENVME_PulseOutputRegister(int32_t Handle, unsigned short Mask);
  876.  
  877. /*
  878.         CAENVME_ReadDisplay
  879.         -----------------------------------------------------------------------------
  880.         Parameters:
  881.                 [in]  Handle    : The handle that identifies the device.
  882.                 [out] Value     : The values read from the module (see CVDisplay enum).
  883.         -----------------------------------------------------------------------------
  884.         Returns:
  885.                 An error code about the execution of the function.
  886.         -----------------------------------------------------------------------------
  887.         Description:
  888.                 The function reads the VME data display on the front panel of the module.
  889.                 Refer to the CVDisplay data type definition and comments to decode the
  890.                 value returned.
  891. */
  892. CAENVME_API
  893. CAENVME_ReadDisplay(int32_t Handle, CVDisplay *Value);
  894.  
  895. /*
  896.         CAENVME_SetArbiterType
  897.         -----------------------------------------------------------------------------
  898.         Parameters:
  899.                 [in]  Handle    : The handle that identifies the device.
  900.                 [in]  Value     : The type of VME bus arbitration to implement (see
  901.                                   CVArbiterTypes enum).
  902.         -----------------------------------------------------------------------------
  903.         Returns:
  904.                 An error code about the execution of the function.
  905.         -----------------------------------------------------------------------------
  906.         Description:
  907.                 The function sets the behaviour of the VME bus arbiter on the module.
  908. */
  909. CAENVME_API
  910. CAENVME_SetArbiterType(int32_t Handle, CVArbiterTypes Value);
  911.  
  912. /*
  913.         CAENVME_SetRequesterType
  914.         -----------------------------------------------------------------------------
  915.         Parameters:
  916.                 [in]  Handle    : The handle that identifies the device.
  917.                 [in]  Value     : The type of VME bus requester to implement (see
  918.                                   CVRequesterTypes enum).
  919.         -----------------------------------------------------------------------------
  920.         Returns:
  921.                 An error code about the execution of the function.
  922.         -----------------------------------------------------------------------------
  923.         Description:
  924.                 The function sets the behaviour of the VME bus requester on the module.
  925. */
  926. CAENVME_API
  927. CAENVME_SetRequesterType(int32_t Handle, CVRequesterTypes Value);
  928.  
  929. /*
  930.         CAENVME_SetReleaseType
  931.         -----------------------------------------------------------------------------
  932.         Parameters:
  933.                 [in]  Handle    : The handle that identifies the device.
  934.                 [in]  Value     : The type of VME bus release policy to implement (see
  935.                                   CVReleaseTypes enum).
  936.         -----------------------------------------------------------------------------
  937.         Returns:
  938.                 An error code about the execution of the function.
  939.         -----------------------------------------------------------------------------
  940.         Description:
  941.                 The function sets the release policy of the VME bus on the module.
  942. */
  943. CAENVME_API
  944. CAENVME_SetReleaseType(int32_t Handle, CVReleaseTypes Value);
  945.  
  946. /*
  947.         CAENVME_SetBusReqLevel
  948.         -----------------------------------------------------------------------------
  949.         Parameters:
  950.                 [in]  Handle    : The handle that identifies the device.
  951.                 [in]  Value     : The type of VME bus requester priority level to set
  952.                                   (see CVBusReqLevels enum).
  953.         -----------------------------------------------------------------------------
  954.         Returns:
  955.                 An error code about the execution of the function.
  956.         -----------------------------------------------------------------------------
  957.         Description:
  958.                 The function sets the specified VME bus requester priority level on
  959.                 the module.
  960. */
  961. CAENVME_API
  962. CAENVME_SetBusReqLevel(int32_t Handle, CVBusReqLevels Value);
  963.  
  964. /*
  965.         CAENVME_SetTimeout
  966.         -----------------------------------------------------------------------------
  967.         Parameters:
  968.                 [in]  Handle    : The handle that identifies the device.
  969.                 [in]  Value     : The value of VME bus timeout to set (see
  970.                                   CVVMETimeouts enum).
  971.         -----------------------------------------------------------------------------
  972.         Returns:
  973.                 An error code about the execution of the function.
  974.         -----------------------------------------------------------------------------
  975.         Description:
  976.                 The function sets the specified VME bus timeout on the module.
  977. */
  978. CAENVME_API
  979. CAENVME_SetTimeout(int32_t Handle, CVVMETimeouts Value);
  980.  
  981. /*
  982.         CAENVME_SetLocationMonitor
  983.         -----------------------------------------------------------------------------
  984.         Parameters:
  985.                 [in]  Handle    : The handle that identifies the device.
  986.                 [in]  Address   : The addres to be monitored.
  987.                 [in]  Write     : Flag to specify read or write cycle types.
  988.                 [in]  Lword     : Flag to specify long word cycle type.
  989.                 [in]  Iack      : Flag to specify interrupt acknowledge cycle type.
  990.  
  991.         -----------------------------------------------------------------------------
  992.         Returns:
  993.                 An error code about the execution of the function.
  994.         -----------------------------------------------------------------------------
  995.         Description:
  996.                 The function sets the Location Monitor.
  997. */
  998. CAENVME_API
  999. CAENVME_SetLocationMonitor(int32_t Handle, uint32_t Address, CVAddressModifier Am,
  1000.                            short Write, short Lword, short Iack);
  1001. /*
  1002.         CAENVME_SetFIFOMode
  1003.         -----------------------------------------------------------------------------
  1004.         Parameters:
  1005.                 [in]  Handle    : The handle that identifies the device.
  1006.                 [in]  Value     : Enable/disable the FIFO mode.
  1007.         -----------------------------------------------------------------------------
  1008.         Returns:
  1009.                 An error code about the execution of the function.
  1010.         -----------------------------------------------------------------------------
  1011.         Description:
  1012.                 The function enables/disables the auto increment of the VME addresses
  1013.                 during the block transfer cycles. With the FIFO mode enabled the
  1014.                 addresses are not incremented.
  1015. */
  1016. CAENVME_API
  1017. CAENVME_SetFIFOMode(int32_t Handle, short Value);
  1018.  
  1019. /*
  1020.         CAENVME_GetArbiterType
  1021.         -----------------------------------------------------------------------------
  1022.         Parameters:
  1023.                 [in]  Handle    : The handle that identifies the device.
  1024.                 [out] Value     : The type of VME bus arbitration implemented (see
  1025.                                   CVArbiterTypes enum).
  1026.         -----------------------------------------------------------------------------
  1027.         Returns:
  1028.                 An error code about the execution of the function.
  1029.         -----------------------------------------------------------------------------
  1030.         Description:
  1031.                 The function get the type of VME bus arbiter implemented on the module.
  1032. */
  1033. CAENVME_API
  1034. CAENVME_GetArbiterType(int32_t Handle, CVArbiterTypes *Value);
  1035.  
  1036. /*
  1037.         CAENVME_GetRequesterType
  1038.         -----------------------------------------------------------------------------
  1039.         Parameters:
  1040.                 [in]  Handle    : The handle that identifies the device.
  1041.                 [out] Value     : The type of VME bus requester implemented (see
  1042.                                   CVRequesterTypes enum).
  1043.         -----------------------------------------------------------------------------
  1044.         Returns:
  1045.                 An error code about the execution of the function.
  1046.         -----------------------------------------------------------------------------
  1047.         Description:
  1048.                 The function get the type of VME bus requester implemented on the module.
  1049. */
  1050. CAENVME_API
  1051. CAENVME_GetRequesterType(int32_t Handle, CVRequesterTypes *Value);
  1052.  
  1053. /*
  1054.         CAENVME_GetReleaseType
  1055.         -----------------------------------------------------------------------------
  1056.         Parameters:
  1057.                 [in]  Handle    : The handle that identifies the device.
  1058.                 [out] Value     : The type of VME bus release policy implemented (see
  1059.                                   CVReleaseTypes enum).
  1060.         -----------------------------------------------------------------------------
  1061.         Returns:
  1062.                 An error code about the execution of the function.
  1063.         -----------------------------------------------------------------------------
  1064.         Description:
  1065.                 The function get the type of VME bus release implemented on the module.
  1066. */
  1067. CAENVME_API
  1068. CAENVME_GetReleaseType(int32_t Handle, CVReleaseTypes *Value);
  1069.  
  1070. /*
  1071.         CAENVME_GetBusReqLevel
  1072.         -----------------------------------------------------------------------------
  1073.         Parameters:
  1074.                 [in]  Handle    : The handle that identifies the device.
  1075.                 [out] Value     : The type of VME bus requester priority level (see
  1076.                                   CVBusReqLevels enum).
  1077.         -----------------------------------------------------------------------------
  1078.         Returns:
  1079.                 An error code about the execution of the function.
  1080.         -----------------------------------------------------------------------------
  1081.         Description:
  1082.                 The function reads the specified VME bus requester priority level on
  1083.                 the module.
  1084. */
  1085. CAENVME_API
  1086. CAENVME_GetBusReqLevel(int32_t Handle, CVBusReqLevels *Value);
  1087.  
  1088. /*
  1089.         CAENVME_GetTimeout
  1090.         -----------------------------------------------------------------------------
  1091.         Parameters:
  1092.                 [in]  Handle    : The handle that identifies the device.
  1093.                 [out] Value     : The value of VME bus timeout (see CVVMETimeouts enum).
  1094.         -----------------------------------------------------------------------------
  1095.         Returns:
  1096.                 An error code about the execution of the function.
  1097.         -----------------------------------------------------------------------------
  1098.         Description:
  1099.                 The function sets the specified VME bus timeout on the module.
  1100. */
  1101. CAENVME_API
  1102. CAENVME_GetTimeout(int32_t Handle, CVVMETimeouts *Value);
  1103.  
  1104. /*
  1105.         CAENVME_GetFIFOMode
  1106.         -----------------------------------------------------------------------------
  1107.         Parameters:
  1108.                 [in]  Handle    : The handle that identifies the device.
  1109.                 [out] Value     : The FIFO mode read setting.
  1110.         -----------------------------------------------------------------------------
  1111.         Returns:
  1112.                 An error code about the execution of the function.
  1113.         -----------------------------------------------------------------------------
  1114.         Description:
  1115.                 The function read if the auto increment of the VME addresses during the
  1116.                 block transfer cycles is enabled (0) or disabled (!=0).
  1117. */
  1118. CAENVME_API
  1119. CAENVME_GetFIFOMode(int32_t Handle, short *Value);
  1120.  
  1121. /*
  1122.         CAENVME_SystemReset
  1123.         -----------------------------------------------------------------------------
  1124.         Parameters:
  1125.                 [in]  Handle    : The handle that identifies the device.
  1126.         -----------------------------------------------------------------------------
  1127.         Returns:
  1128.                 An error code about the execution of the function.
  1129.         -----------------------------------------------------------------------------
  1130.         Description:
  1131.                 The function performs a system reset on the module.
  1132. */
  1133. CAENVME_API
  1134. CAENVME_SystemReset(int32_t Handle);
  1135.  
  1136. /*
  1137.         CAENVME_ResetScalerCount
  1138.         -----------------------------------------------------------------------------
  1139.         Parameters:
  1140.                 [in]  Handle    : The handle that identifies the device.
  1141.         -----------------------------------------------------------------------------
  1142.         Returns:
  1143.                 An error code about the execution of the function.
  1144.         -----------------------------------------------------------------------------
  1145.         Description:
  1146.                 The function resets the counter of the scaler..
  1147. */
  1148. CAENVME_API
  1149. CAENVME_ResetScalerCount(int32_t Handle);
  1150.  
  1151. /*
  1152.         CAENVME_EnableScalerGate
  1153.         -----------------------------------------------------------------------------
  1154.         Parameters:
  1155.                 [in]  Handle    : The handle that identifies the device.
  1156.         -----------------------------------------------------------------------------
  1157.         Returns:
  1158.                 An error code about the execution of the function.
  1159.         -----------------------------------------------------------------------------
  1160.         Description:
  1161.                 The function enables the gate of the scaler.
  1162. */
  1163. CAENVME_API
  1164. CAENVME_EnableScalerGate(int32_t Handle);
  1165.  
  1166. /*
  1167.         CAENVME_DisableScalerGate
  1168.         -----------------------------------------------------------------------------
  1169.         Parameters:
  1170.                 [in]  Handle    : The handle that identifies the device.
  1171.         -----------------------------------------------------------------------------
  1172.         Returns:
  1173.                 An error code about the execution of the function.
  1174.         -----------------------------------------------------------------------------
  1175.         Description:
  1176.                 The function disables the gate of the scaler.
  1177. */
  1178. CAENVME_API
  1179. CAENVME_DisableScalerGate(int32_t Handle);
  1180.  
  1181. /*
  1182.         CAENVME_StartPulser
  1183.         -----------------------------------------------------------------------------
  1184.         Parameters:
  1185.                 [in]  Handle    : The handle that identifies the device.
  1186.                 [in]  PulSel    : The pulser to configure (see CVPulserSelect enum).
  1187.         -----------------------------------------------------------------------------
  1188.         Returns:
  1189.                 An error code about the execution of the function.
  1190.         -----------------------------------------------------------------------------
  1191.         Description:
  1192.                 The function starts the generation of pulse burst if the specified
  1193.                 pulser is configured for manual/software operation.
  1194. */
  1195. CAENVME_API
  1196. CAENVME_StartPulser(int32_t Handle, CVPulserSelect PulSel);
  1197.  
  1198. /*
  1199.         CAENVME_StopPulser
  1200.         -----------------------------------------------------------------------------
  1201.         Parameters:
  1202.                 [in]  Handle    : The handle that identifies the device.
  1203.                 [in]  PulSel    : The pulser to configure (see CVPulserSelect enum).
  1204.         -----------------------------------------------------------------------------
  1205.         Returns:
  1206.                 An error code about the execution of the function.
  1207.         -----------------------------------------------------------------------------
  1208.         Description:
  1209.                 The function stops the generation of pulse burst if the specified
  1210.                 pulser is configured for manual/software operation.
  1211. */
  1212. CAENVME_API
  1213. CAENVME_StopPulser(int32_t Handle, CVPulserSelect PulSel);
  1214.  
  1215. /*
  1216.         CAENVME_WriteFlashPage
  1217.         -----------------------------------------------------------------------------
  1218.         Parameters:
  1219.                 [in]  Handle    : The handle that identifies the device.
  1220.                 [in]  Data      : The data to write.
  1221.                 [in]  PageNum   : The flash page number to write.
  1222.         -----------------------------------------------------------------------------
  1223.         Returns:
  1224.                 An error code about the execution of the function.
  1225.         -----------------------------------------------------------------------------
  1226.         Description:
  1227.                 The function writes the data into the specified flash page.
  1228. */
  1229. CAENVME_API
  1230. CAENVME_WriteFlashPage(int32_t Handle, unsigned char *Data, int PageNum);
  1231.  
  1232. /*
  1233.         CAENVME_ReadFlashPage
  1234.         -----------------------------------------------------------------------------
  1235.         Parameters:
  1236.                 [in]  Handle    : The handle that identifies the device.
  1237.                 [out] Data      : The data to write.
  1238.                 [in]  PageNum   : The flash page number to write.
  1239.         -----------------------------------------------------------------------------
  1240.         Returns:
  1241.                 An error code about the execution of the function.
  1242.         -----------------------------------------------------------------------------
  1243.         Description:
  1244.                 The function reads the data from the specified flash page.
  1245. */
  1246. CAENVME_API
  1247. CAENVME_ReadFlashPage(int32_t Handle, unsigned char *Data, int PageNum);
  1248.  
  1249. /*
  1250.         CAENVME_EraseFlashPage
  1251.         -----------------------------------------------------------------------------
  1252.         Parameters:
  1253.                 [in]  Handle    : The handle that identifies the device.
  1254.                 [in]  PageNum   : The flash page number to write.
  1255.         -----------------------------------------------------------------------------
  1256.         Returns:
  1257.                 An error code about the execution of the function.
  1258.         -----------------------------------------------------------------------------
  1259.         Description:
  1260.                 The function erases the specified flash page.
  1261. */
  1262. CAENVME_API
  1263. CAENVME_EraseFlashPage(int32_t Handle, int Pagenum);
  1264.  
  1265. #ifdef LINUX
  1266. /*
  1267.         CAENVME_BLTReadAsync
  1268.         -----------------------------------------------------------------------------
  1269.         Parameters:
  1270.                 [in]  Handle    : The handle that identifies the device.
  1271.                 [in]  Address   : The VME bus address.
  1272.                 [out] Buffer    : The data read from the VME bus.
  1273.                 [in]  Size      : The size of the transfer in bytes.
  1274.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  1275.                 [in]  DW        : The data width.(see CVDataWidth enum).
  1276.         -----------------------------------------------------------------------------
  1277.         Returns:
  1278.                 An error code about the execution of the function.
  1279.         -----------------------------------------------------------------------------
  1280.         Description:
  1281.                 The function starts a VME block transfer read cycle. It can be used
  1282.                 to perform MBLT transfers using 64 bit data width.
  1283.                 This function cannot be used with the V1718 USB bridge.
  1284.                 This function can be used only on Linux platforms.
  1285.                 Take care to call the CAENVME_BLTReadWait function before any other
  1286.                 call to a CAENVMElib function with the same handle.
  1287. */
  1288. CAENVME_API
  1289. CAENVME_BLTReadAsync(int32_t Handle, uint32_t Address, void *Buffer,
  1290.                      int Size, CVAddressModifier AM, CVDataWidth DW);
  1291.  
  1292. /*
  1293.         CAENVME_BLTReadWait
  1294.         -----------------------------------------------------------------------------
  1295.         Parameters:
  1296.                 [in]  Handle    : The handle that identifies the device.
  1297.                 [out] Count     : The number of bytes transferred.
  1298.         -----------------------------------------------------------------------------
  1299.         Returns:
  1300.                 An error code about the execution of the function.
  1301.         -----------------------------------------------------------------------------
  1302.         Description:
  1303.                 The function wait for the completion of a VME block transfer read
  1304.                 cycle started with the CAENVME_BLTReadAsync function call.
  1305.                 This function cannot be used with the V1718 USB bridge.
  1306.                 This function can be used only on Linux platforms.
  1307. */
  1308. CAENVME_API
  1309. CAENVME_BLTReadWait(int32_t Handle, int *Count);
  1310.  
  1311. #endif
  1312.  
  1313. #ifdef __cplusplus
  1314. }
  1315. #endif // __cplusplus
  1316.  
  1317. #endif // __CAENVMELIB_H
  1318.