Subversion Repositories f9daq

Rev

Blame | Last modification | View Log | RSS feed

  1. /*!
  2.         -----------------------------------------------------------------------------
  3.  
  4.                        --- CAEN SpA - Computing Systems Division ---
  5.  
  6.         -----------------------------------------------------------------------------
  7.  
  8.         CAENVMElib.h
  9.  
  10.         -----------------------------------------------------------------------------
  11.  
  12.         Created: March 2004
  13.  
  14.         -----------------------------------------------------------------------------
  15. */
  16. #ifndef __CAENVMELIB_H
  17. #define __CAENVMELIB_H
  18.  
  19. #include <stdio.h>
  20. // Rev. 2.5
  21. #ifdef LINUX
  22.         #include <stdint.h>
  23. #endif
  24. #include <stdlib.h>
  25. #ifndef _CVI_
  26. #include <malloc.h>
  27. #endif
  28. #include "CAENVMEoslib.h"
  29. #include "CAENVMEtypes.h"
  30.  
  31.  
  32.  
  33. #ifdef __cplusplus
  34. extern "C" {
  35. #endif // __cplusplus
  36. /*
  37.         CAENVME_DecodeError
  38.         -----------------------------------------------------------------------------
  39.         Parameters:
  40.                 [in]  Code      : The error code to decode.
  41.         -----------------------------------------------------------------------------
  42.         Returns:
  43.                 An string describing the error condition.
  44.         -----------------------------------------------------------------------------
  45.         Description:
  46.                 Decode the error.
  47. */
  48. const char *
  49. #ifdef WIN32
  50. __stdcall
  51. #endif
  52. CAENVME_DecodeError(CVErrorCodes Code);
  53.  
  54. /*
  55.         CAENVME_API CAENVME_SWRelease
  56.         -----------------------------------------------------------------------------
  57.         Parameters:
  58.                 [out] SwRel     : Returns the software release of the library.
  59.         -----------------------------------------------------------------------------
  60.         Returns:
  61.                 An error code about the execution of the function.
  62.         -----------------------------------------------------------------------------
  63.         Description:
  64.                 Permits to read the software release of the library.
  65. */
  66. CAENVME_API
  67. CAENVME_SWRelease(char *SwRel);
  68.  
  69. /*
  70.         CAENVME_BoardFWRelease.
  71.         -----------------------------------------------------------------------------
  72.         Parameters:
  73.                 [in]  Handle    : The handle that identifies the device.
  74.                 [out] FWRel     : Returns the firmware release of the device.
  75.         -----------------------------------------------------------------------------
  76.         Returns:
  77.                 An error code about the execution of the function.
  78.         -----------------------------------------------------------------------------
  79.         Description:
  80.                 Permits to read the firmware release loaded into the device.
  81. */
  82. CAENVME_API
  83. CAENVME_BoardFWRelease(int32_t Handle, char *FWRel);
  84.  
  85. /*
  86.         CAENVME_DriverRelease.
  87.         -----------------------------------------------------------------------------
  88.         Parameters:
  89.                 [in]  Handle    : The handle that identifies the device.
  90.                 [out] Rel       : Returns the software release of the device driver
  91.         -----------------------------------------------------------------------------
  92.         Returns:
  93.                 An error code about the execution of the function.
  94.         -----------------------------------------------------------------------------
  95.         Description:
  96.                 Permits to read the software release of the device driver.
  97. */
  98. CAENVME_API
  99. CAENVME_DriverRelease(int32_t Handle, char *Rel);
  100.  
  101. /*
  102.         CAENVME_DeviceReset
  103.         -----------------------------------------------------------------------------
  104.         Parameters:
  105.                 [in]  Handle    : The handle that identifies the device.
  106.         -----------------------------------------------------------------------------
  107.         Returns:
  108.                 An error code about the execution of the function.
  109.         -----------------------------------------------------------------------------
  110.         Description:
  111.                 Permits to reset the device.
  112.                 Implemented for A2818, A2719, V2718 on Linux platform only
  113. */
  114. CAENVME_API
  115. CAENVME_DeviceReset(int32_t dev);
  116.  
  117.  
  118. /*
  119.         CAENVME_Init
  120.         -----------------------------------------------------------------------------
  121.         Parameters:
  122.                 [in]  BdType    : The model of the bridge (V1718/V2718).
  123.                 [in]  Link      : The link number (don't care for V1718).
  124.                 [in]  BdNum     : The board number in the link.
  125.                 [out] Handle    : The handle that identifies the device.
  126.         -----------------------------------------------------------------------------
  127.         Returns:
  128.                 An error code about the execution of the function.
  129.         -----------------------------------------------------------------------------
  130.         Description:
  131.                 The function generates an opaque handle to identify a module
  132.                 attached to the PC. In the case of V1718 bridge it must be
  133.                 specified only the module index (BdNum) because the link is USB.
  134.                 In the case of V2718 it must be specified also the link because
  135.                 you can have some A2818 optical link inside the PC.
  136. */
  137. CAENVME_API
  138. CAENVME_Init(CVBoardTypes BdType, short Link, short BdNum, int32_t *Handle);
  139.  
  140. /*
  141.         CAENVME_End
  142.         -----------------------------------------------------------------------------
  143.         Parameters:
  144.                 [in]  Handle    : The handle that identifies the device.
  145.         -----------------------------------------------------------------------------
  146.         Returns:
  147.                 An error code about the execution of the function.
  148.         -----------------------------------------------------------------------------
  149.         Description:
  150.                 Notifies the library the end of work and free the allocated
  151.                 resources.
  152. */
  153. CAENVME_API
  154. CAENVME_End(int32_t Handle);
  155.  
  156. /*
  157.         CAENVME_ReadCycle
  158.         -----------------------------------------------------------------------------
  159.         Parameters:
  160.                 [in]  Handle    : The handle that identifies the device.
  161.                 [in]  Address   : The VME bus address.
  162.                 [out] Data      : The data read from the VME bus.
  163.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  164.                 [in]  DW        : The data width.(see CVDataWidth enum).
  165.         -----------------------------------------------------------------------------
  166.         Returns:
  167.                 An error code about the execution of the function.
  168.         -----------------------------------------------------------------------------
  169.         Description:
  170.                 The function performs a single VME read cycle.
  171. */
  172. CAENVME_API
  173. CAENVME_ReadCycle(int32_t Handle, uint32_t Address, void *Data,
  174.                   CVAddressModifier AM, CVDataWidth DW);
  175.  
  176. /*
  177.         CAENVME_RMWCycle
  178.         -----------------------------------------------------------------------------
  179.         Parameters:
  180.                 [in]     Handle : The handle that identifies the device.
  181.                 [in]     Address: The VME bus address.
  182.                 [in/out] Data   : The data read and then written to the VME bus.
  183.                 [in]     AM     : The address modifier (see CVAddressModifier enum).
  184.                 [in]     DW     : The data width.(see CVDataWidth enum).
  185.         -----------------------------------------------------------------------------
  186.         Returns:
  187.                 An error code about the execution of the function.
  188.         -----------------------------------------------------------------------------
  189.         Description:
  190.                 The function performs a Read-Modify-Write cycle. The Data parameter
  191.                 is bidirectional: it is used to write the value to the VME bus and to
  192.                 return the value read.
  193. */
  194. CAENVME_API
  195. CAENVME_RMWCycle(int32_t Handle, uint32_t Address,  void *Data,
  196.                  CVAddressModifier AM, CVDataWidth DW);
  197.  
  198. /*
  199.         CAENVME_WriteCycle
  200.         -----------------------------------------------------------------------------
  201.         Parameters:
  202.                 [in]  Handle    : The handle that identifies the device.
  203.                 [in]  Address   : The VME bus address.
  204.                 [in]  Data      : The data written to the VME bus.
  205.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  206.                 [in]  DW        : The data width.(see CVDataWidth enum).
  207.         -----------------------------------------------------------------------------
  208.         Returns:
  209.                 An error code about the execution of the function.
  210.         -----------------------------------------------------------------------------
  211.         Description:
  212.                 The function performs a single VME write cycle.
  213. */
  214. CAENVME_API
  215. CAENVME_WriteCycle(int32_t Handle, uint32_t Address, void *Data,
  216.                    CVAddressModifier AM, CVDataWidth DW);
  217.  
  218. /*
  219.         CAENVME_MultiRead (Ver. 2.2)
  220.         -----------------------------------------------------------------------------
  221.         Parameters:
  222.                 [in]  Handle    : The handle that identifies the device.
  223.                 [in]  Addrs     : The VME bus addresses.
  224.                 [out] Buffer    : The data read from the VME bus.
  225.                 [in]  NCycles   : The number of read cycles to perform.
  226.                 [in]  AMs       : The address modifiers (see CVAddressModifier enum).
  227.                 [in]  DWs       : The data widths.(see CVDataWidth enum).
  228.                 [out] ECs       : The error codes relaive to each cycle.
  229.         -----------------------------------------------------------------------------
  230.         Returns:
  231.                 An error code about the execution of the function.
  232.         -----------------------------------------------------------------------------
  233.         Description:
  234.                 The function performs a block of single VME read cycles.
  235. */
  236. CAENVME_API
  237. CAENVME_MultiRead(int32_t Handle, uint32_t *Addrs, uint32_t *Buffer,
  238.         int NCycles, CVAddressModifier *AMs, CVDataWidth *DWs, CVErrorCodes *ECs);
  239.  
  240. /*
  241.         CAENVME_MultiWrite (Ver. 2.2)
  242.         -----------------------------------------------------------------------------
  243.         Parameters:
  244.                 [in]  Handle    : The handle that identifies the device.
  245.                 [in]  Addrs     : The VME bus addresses.
  246.                 [in]  Buffer    : The data to write to the VME bus.
  247.                 [in]  NCycles   : The number of read cycles to perform.
  248.                 [in]  AMs       : The address modifiers (see CVAddressModifier enum).
  249.                 [in]  DWs       : The data widths.(see CVDataWidth enum).
  250.                 [out] ECs       : The error codes relaive to each cycle.
  251.         -----------------------------------------------------------------------------
  252.         Returns:
  253.                 An error code about the execution of the function.
  254.         -----------------------------------------------------------------------------
  255.         Description:
  256.                 The function performs a block of single VME write cycles.
  257. */
  258. CAENVME_API
  259. CAENVME_MultiWrite(int32_t Handle, uint32_t *Addrs, uint32_t *Buffer,
  260.         int NCycles, CVAddressModifier *AMs, CVDataWidth *DWs, CVErrorCodes *ECs);
  261.  
  262. /*
  263.         CAENVME_BLTReadCycle
  264.         -----------------------------------------------------------------------------
  265.         Parameters:
  266.                 [in]  Handle    : The handle that identifies the device.
  267.                 [in]  Address   : The VME bus address.
  268.                 [out] Buffer    : The data read from the VME bus.
  269.                 [in]  Size      : The size of the transfer in bytes.
  270.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  271.                 [in]  DW        : The data width.(see CVDataWidth enum).
  272.                 [out] count     : The number of bytes transferred.
  273.         -----------------------------------------------------------------------------
  274.         Returns:
  275.                 An error code about the execution of the function.
  276.         -----------------------------------------------------------------------------
  277.         Description:
  278.                 The function performs a VME block transfer read cycle. It can be used to
  279.                 perform MBLT transfers using 64 bit data width.
  280. */
  281. CAENVME_API
  282. CAENVME_BLTReadCycle(int32_t Handle, uint32_t Address, void *Buffer,
  283.                      int Size, CVAddressModifier AM, CVDataWidth DW, int *count);
  284.  
  285. /*
  286.         Ver. 2.3 - New function
  287.  
  288.         CAENVME_FIFOBLTReadCycle
  289.         -----------------------------------------------------------------------------
  290.         Parameters:
  291.                 [in]  Handle    : The handle that identifies the device.
  292.                 [in]  Address   : The VME bus address.
  293.                 [out] Buffer    : The data read from the VME bus.
  294.                 [in]  Size      : The size of the transfer in bytes.
  295.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  296.                 [in]  DW        : The data width.(see CVDataWidth enum).
  297.                 [out] count     : The number of bytes transferred.
  298.         -----------------------------------------------------------------------------
  299.         Returns:
  300.                 An error code about the execution of the function.
  301.         -----------------------------------------------------------------------------
  302.         Description:
  303.                 The function performs a VME block transfer read cycle. It can be used to
  304.                 perform MBLT transfers using 64 bit data width. The Address is not
  305.                 incremented on the VMEBus during the cycle.
  306. */
  307. CAENVME_API
  308. CAENVME_FIFOBLTReadCycle(int32_t Handle, uint32_t Address, void *Buffer,
  309.                          int Size, CVAddressModifier AM, CVDataWidth DW, int *count);
  310.  
  311. /*
  312.         CAENVME_MBLTReadCycle
  313.         -----------------------------------------------------------------------------
  314.         Parameters:
  315.                 [in]  Handle    : The handle that identifies the device.
  316.                 [in]  Address   : The VME bus address.
  317.                 [out] Buffer    : The data read from the VME bus.
  318.                 [in]  Size      : The size of the transfer in bytes.
  319.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  320.                 [out] count     : The number of bytes transferred.
  321.         -----------------------------------------------------------------------------
  322.         Returns:
  323.                 An error code about the execution of the function.
  324.         -----------------------------------------------------------------------------
  325.         Description:
  326.                 The function performs a VME multiplexed block transfer read cycle.
  327. */
  328. CAENVME_API
  329. CAENVME_MBLTReadCycle(int32_t Handle, uint32_t Address, void *Buffer,
  330.                       int Size, CVAddressModifier AM, int *count);
  331.  
  332. /*
  333.         Ver. 2.3 - New function
  334.        
  335.         CAENVME_FIFOMBLTReadCycle
  336.         -----------------------------------------------------------------------------
  337.         Parameters:
  338.                 [in]  Handle    : The handle that identifies the device.
  339.                 [in]  Address   : The VME bus address.
  340.                 [out] Buffer    : The data read from the VME bus.
  341.                 [in]  Size      : The size of the transfer in bytes.
  342.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  343.                 [out] count     : The number of bytes transferred.
  344.         -----------------------------------------------------------------------------
  345.         Returns:
  346.                 An error code about the execution of the function.
  347.         -----------------------------------------------------------------------------
  348.         Description:
  349.                 The function performs a VME multiplexed block transfer read cycle.
  350.                 The Address is not incremented on the VMEBus during the cycle.
  351. */
  352. CAENVME_API
  353. CAENVME_FIFOMBLTReadCycle(int32_t Handle, uint32_t Address, void *Buffer,
  354.                           int Size, CVAddressModifier AM, int *count);
  355.  
  356. /*
  357.         CAENVME_BLTWriteCycle
  358.         -----------------------------------------------------------------------------
  359.         Parameters:
  360.                 [in]  Handle    : The handle that identifies the device.
  361.                 [in]  Address   : The VME bus address.
  362.                 [in]  Buffer    : The data to be written to the VME bus.
  363.                 [in]  Size      : The size of the transfer in bytes.
  364.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  365.                 [in]  DW        : The data width.(see CVDataWidth enum).
  366.                 [out] count     : The number of bytes transferred.
  367.         -----------------------------------------------------------------------------
  368.         Returns:
  369.                 An error code about the execution of the function.
  370.         -----------------------------------------------------------------------------
  371.         Description:
  372.                 The function performs a VME block transfer write cycle.
  373. */
  374. CAENVME_API
  375. CAENVME_BLTWriteCycle(int32_t Handle, uint32_t Address, void *Buffer,
  376.                       int size, CVAddressModifier AM, CVDataWidth DW, int *count);
  377.  
  378. /*
  379.         Ver. 2.3 - New function
  380.  
  381.         CAENVME_FIFOBLTWriteCycle
  382.         -----------------------------------------------------------------------------
  383.         Parameters:
  384.                 [in]  Handle    : The handle that identifies the device.
  385.                 [in]  Address   : The VME bus address.
  386.                 [in]  Buffer    : The data to be written to the VME bus.
  387.                 [in]  Size      : The size of the transfer in bytes.
  388.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  389.                 [in]  DW        : The data width.(see CVDataWidth enum).
  390.                 [out] count     : The number of bytes transferred.
  391.         -----------------------------------------------------------------------------
  392.         Returns:
  393.                 An error code about the execution of the function.
  394.         -----------------------------------------------------------------------------
  395.         Description:
  396.                 The function performs a VME block transfer write cycle. The address
  397.                 is not incremented during the cycle.
  398. */
  399. CAENVME_API
  400. CAENVME_FIFOBLTWriteCycle(int32_t Handle, uint32_t Address, void *Buffer,
  401.                       int size, CVAddressModifier AM, CVDataWidth DW, int *count);
  402.  
  403. /*
  404.         CAENVME_MBLTWriteCycle
  405.         -----------------------------------------------------------------------------
  406.         Parameters:
  407.                 [in]  Handle    : The handle that identifies the device.
  408.                 [in]  Address   : The VME bus address.
  409.                 [in]  Buffer    : The data to be written to the VME bus.
  410.                 [in]  Size      : The size of the transfer in bytes.
  411.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  412.                 [out] count     : The number of bytes transferred.
  413.         -----------------------------------------------------------------------------
  414.         Returns:
  415.                 An error code about the execution of the function.
  416.         -----------------------------------------------------------------------------
  417.         Description:
  418.                 The function performs a VME multiplexed block transfer write cycle.
  419. */
  420. CAENVME_API
  421. CAENVME_MBLTWriteCycle(int32_t Handle, uint32_t Address, void *Buffer,
  422.                        int size, CVAddressModifier AM, int *count);
  423.  
  424. /*
  425.         Ver. 2.3 - New function
  426.        
  427.         CAENVME_FIFOMBLTWriteCycle
  428.         -----------------------------------------------------------------------------
  429.         Parameters:
  430.                 [in]  Handle    : The handle that identifies the device.
  431.                 [in]  Address   : The VME bus address.
  432.                 [in]  Buffer    : The data to be written to the VME bus.
  433.                 [in]  Size      : The size of the transfer in bytes.
  434.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  435.                 [out] count     : The number of bytes transferred.
  436.         -----------------------------------------------------------------------------
  437.         Returns:
  438.                 An error code about the execution of the function.
  439.         -----------------------------------------------------------------------------
  440.         Description:
  441.                 The function performs a VME multiplexed block transfer write cycle.
  442.                 The address is not incremented during the cycle.
  443. */
  444. CAENVME_API
  445. CAENVME_FIFOMBLTWriteCycle(int32_t Handle, uint32_t Address, void *Buffer,
  446.                            int size, CVAddressModifier AM, int *count);
  447.  
  448. /*
  449.         CAENVME_ADOCycle
  450.         -----------------------------------------------------------------------------
  451.         Parameters:
  452.                 [in]  Handle    : The handle that identifies the device.
  453.                 [in]  Address   : The VME bus address.
  454.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  455.         -----------------------------------------------------------------------------
  456.         Returns:
  457.                 An error code about the execution of the function.
  458.         -----------------------------------------------------------------------------
  459.         Description:
  460.                 The function performs a VME address only cycle. It can be used to
  461.                 perform MBLT transfers using 64 bit data width.
  462. */
  463. CAENVME_API
  464. CAENVME_ADOCycle(int32_t Handle, uint32_t Address, CVAddressModifier AM);
  465.  
  466. /*
  467.         CAENVME_ADOHCycle
  468.         -----------------------------------------------------------------------------
  469.         Parameters:
  470.                 [in]  Handle    : The handle that identifies the device.
  471.                 [in]  Address   : The VME bus address.
  472.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  473.         -----------------------------------------------------------------------------
  474.         Returns:
  475.                 An error code about the execution of the function.
  476.         -----------------------------------------------------------------------------
  477.         Description:
  478.                 The function performs a VME address only with handshake cycle.
  479. */
  480. CAENVME_API
  481. CAENVME_ADOHCycle(int32_t Handle, uint32_t Address, CVAddressModifier AM);
  482.  
  483. /*
  484.         CAENVME_IACKCycle
  485.         -----------------------------------------------------------------------------
  486.         Parameters:
  487.                 [in]  Handle    : The handle that identifies the device.
  488.                 [in]  Level     : The IRQ level to acknowledge (see CVIRQLevels enum).
  489.                 [in]  DW        : The data width.(see CVDataWidth enum).
  490.         -----------------------------------------------------------------------------
  491.         Returns:
  492.                 An error code about the execution of the function.
  493.         -----------------------------------------------------------------------------
  494.         Description:
  495.                 The function performs a VME interrupt acknowledge cycle.
  496. */
  497. CAENVME_API
  498. CAENVME_IACKCycle(int32_t Handle, CVIRQLevels Level, void *Vector, CVDataWidth DW);
  499.  
  500. /*
  501.         CAENVME_IRQCheck
  502.         -----------------------------------------------------------------------------
  503.         Parameters:
  504.                 [in]  Handle    : The handle that identifies the device.
  505.                 [out] Mask      : A bit-mask indicating the active IRQ lines.
  506.         -----------------------------------------------------------------------------
  507.         Returns:
  508.                 An error code about the execution of the function.
  509.         -----------------------------------------------------------------------------
  510.         Description:
  511.                 The function returns a bit mask indicating the active IRQ lines.
  512. */
  513. CAENVME_API
  514. CAENVME_IRQCheck(int32_t Handle, CAEN_BYTE *Mask);
  515.  
  516. /*
  517.         CAENVME_IRQEnable
  518.         -----------------------------------------------------------------------------
  519.         Parameters:
  520.                 [in]  Handle    : The handle that identifies the device.
  521.                 [in]  Mask      : A bit-mask indicating the IRQ lines.
  522.         -----------------------------------------------------------------------------
  523.         Returns:
  524.                 An error code about the execution of the function.
  525.         -----------------------------------------------------------------------------
  526.         Description:
  527.                 The function enables the IRQ lines specified by Mask.
  528. */
  529. CAENVME_API
  530. CAENVME_IRQEnable(int32_t Handle, uint32_t Mask);
  531.  
  532. /*
  533.         CAENVME_IRQDisable
  534.         -----------------------------------------------------------------------------
  535.         Parameters:
  536.                 [in]  Handle    : The handle that identifies the device.
  537.                 [in]  Mask      : A bit-mask indicating the IRQ lines.
  538.         -----------------------------------------------------------------------------
  539.         Returns:
  540.                 An error code about the execution of the function.
  541.         -----------------------------------------------------------------------------
  542.         Description:
  543.                 The function disables the IRQ lines specified by Mask.
  544. */
  545. CAENVME_API
  546. CAENVME_IRQDisable(int32_t Handle, uint32_t Mask);
  547.  
  548. /*
  549.         CAENVME_IRQWait
  550.         -----------------------------------------------------------------------------
  551.         Parameters:
  552.                 [in]  Handle    : The handle that identifies the device.
  553.                 [in]  Mask      : A bit-mask indicating the IRQ lines.
  554.                 [in]  Timeout   : Timeout in milliseconds.
  555.         -----------------------------------------------------------------------------
  556.         Returns:
  557.                 An error code about the execution of the function.
  558.         -----------------------------------------------------------------------------
  559.         Description:
  560.                 The function wait the IRQ lines specified by Mask until one of
  561.                 them raise or timeout expires.
  562. */
  563. CAENVME_API
  564. CAENVME_IRQWait(int32_t Handle, uint32_t Mask, uint32_t Timeout);
  565.  
  566. /*
  567.         CAENVME_SetPulserConf
  568.         -----------------------------------------------------------------------------
  569.         Parameters:
  570.                 [in]  Handle    : The handle that identifies the device.
  571.                 [in]  PulSel    : The pulser to configure (see CVPulserSelect enum).
  572.                 [in]  Period    : The period of the pulse in time units.
  573.                 [in]  Width     : The width of the pulse in time units.
  574.                 [in]  Unit      : The time unit for the pulser configuration (see
  575.                                   CVTimeUnits enum).
  576.                 [in]  PulseNo   : The number of pulses to generate (0 = infinite).
  577.                 [in]  Start     : The source signal to start the pulse burst (see
  578.                                   CVIOSources enum).
  579.                 [in]  Reset     : The source signal to stop the pulse burst (see
  580.                                   CVIOSources enum).
  581.         -----------------------------------------------------------------------------
  582.         Returns:
  583.                 An error code about the execution of the function.
  584.         -----------------------------------------------------------------------------
  585.         Description:
  586.                 The function permits to configure the pulsers. All the timing parameters
  587.                 are expressed in the time units specified. The start signal source can be
  588.                 one of: front panel button or software (cvManualSW), input signal 0
  589.                 (cvInputSrc0),input signal 1 (cvInputSrc1) or input coincidence
  590.                 (cvCoincidence). The reset signal source can be: front panel button or
  591.                 software (cvManualSW) or, for pulser A the input signal 0 (cvInputSrc0),
  592.                 for pulser B the input signal 1 (cvInputSrc1).
  593. */
  594. CAENVME_API
  595. CAENVME_SetPulserConf(int32_t Handle, CVPulserSelect PulSel, unsigned char Period,
  596.                       unsigned char Width, CVTimeUnits Unit, unsigned char PulseNo,
  597.                       CVIOSources Start, CVIOSources Reset);
  598.  
  599. /*
  600.         CAENVME_SetScalerConf
  601.         -----------------------------------------------------------------------------
  602.         Parameters:
  603.                 [in]  Handle    : The handle that identifies the device.
  604.                 [in]  Limit     : The counter limit for the scaler.
  605.                 [in]  AutoReset : Enable/disable the counter auto reset.
  606.                 [in]  Hit       : The source signal for the signal to count (see
  607.                                   CVIOSources enum).
  608.                 [in]  Gate      : The source signal for the gate (see CVIOSources enum).
  609.                 [in]  Reset     : The source signal to stop the counter (see
  610.                                   CVIOSources enum).
  611.         -----------------------------------------------------------------------------
  612.         Returns:
  613.                 An error code about the execution of the function.
  614.         -----------------------------------------------------------------------------
  615.         Description:
  616.                 The function permits to configure the scaler. Limit range is 0 - 1024
  617.                 (10 bit). The hit signal source can be: input signal 0 (cvInputSrc0)
  618.                 or input coincidence (cvCoincidence). The gate signal source can be:
  619.                 front panel button or software (cvManualSW) or input signal 1
  620.                 (cvInputSrc1). The reset signal source can be: front panel button or
  621.                 software (cvManualSW) or input signal 1 (cvInputSrc1).
  622. */
  623. CAENVME_API
  624. CAENVME_SetScalerConf(int32_t Handle, short Limit, short AutoReset,
  625.                       CVIOSources Hit, CVIOSources Gate, CVIOSources Reset);
  626.  
  627. /*
  628.         CAENVME_SetOutputConf
  629.         -----------------------------------------------------------------------------
  630.         Parameters:
  631.                 [in]  Handle    : The handle that identifies the device.
  632.                 [in]  OutSel    : The output line to configure (see CVOutputSelect
  633.                                   enum).
  634.                 [in]  OutPol    : The output line polarity (see CVIOPolarity enum).
  635.                 [in]  LEDPol    : The output LED polarity (see CVLEDPolarity enum).
  636.                 [in]  Source    : The source signal to propagate to the output line
  637.                                   (see CVIOSources enum).
  638.         -----------------------------------------------------------------------------
  639.         Returns:
  640.                 An error code about the execution of the function.
  641.         -----------------------------------------------------------------------------
  642.         Description:
  643.                 The function permits to configure the output lines of the module. It
  644.                 can be specified the polarity for the line and for the LED. The
  645.                 output line source depends on the line as figured out by the
  646.                 following table:
  647.  
  648.                 +-----------------------------------------------------------+
  649.                 !           S O U R C E      S E L E C T I O N              !
  650.                 +--------------+---------------+---------------+------------+
  651.                 ! cvVMESignals ! cvCoincidence ! cvMiscSignals ! cvManualSW !
  652.         +---+---+--------------+---------------+---------------+------------+
  653.         !   ! 0 !      DS      ! Input Coinc.  !   Pulser A    ! Manual/SW  !
  654.         ! O +---+--------------+---------------+---------------+------------+
  655.         ! U ! 1 !      AS      ! Input Coinc.  !   Pulser A    ! Manual/SW  !
  656.         ! T +---+--------------+---------------+---------------+------------+
  657.         ! P ! 2 !    DTACK     ! Input Coinc.  !   Pulser B    ! Manual/SW  !
  658.         ! U +---+--------------+---------------+---------------+------------+
  659.         ! T ! 3 !     BERR     ! Input Coinc.  !   Pulser B    ! Manual/SW  !
  660.         !   +---+--------------+---------------+---------------+------------+
  661.         !   ! 4 !     LMON     ! Input Coinc.  !  Scaler end   ! Manual/SW  !
  662.         +---+---+--------------+---------------+---------------+------------+
  663. */
  664. CAENVME_API
  665. CAENVME_SetOutputConf(int32_t Handle, CVOutputSelect OutSel, CVIOPolarity OutPol,
  666.                       CVLEDPolarity LEDPol, CVIOSources Source);
  667.  
  668. /*
  669.         CAENVME_SetInputConf
  670.         -----------------------------------------------------------------------------
  671.         Parameters:
  672.                 [in]  Handle    : The handle that identifies the device.
  673.                 [in]  InSel     : The input line to configure (see CVInputSelect enum).
  674.                 [in]  InPol     : The input line polarity (see CVIOPolarity enum).
  675.                 [in]  LEDPol    : The output LED polarity (see CVLEDPolarity enum).
  676.         -----------------------------------------------------------------------------
  677.         Returns:
  678.                 An error code about the execution of the function.
  679.         -----------------------------------------------------------------------------
  680.         Description:
  681.                 The function permits to configure the input lines of the module. It
  682.                 ca be specified the polarity for the line and for the LED.
  683. */
  684. CAENVME_API
  685. CAENVME_SetInputConf(int32_t Handle, CVInputSelect InSel, CVIOPolarity InPol,
  686.                      CVLEDPolarity LEDPol);
  687.  
  688. /*
  689.         CAENVME_GetPulserConf
  690.         -----------------------------------------------------------------------------
  691.         Parameters:
  692.                 [in]  Handle    : The handle that identifies the device.
  693.                 [in]  PulSel    : The pulser to configure (see CVPulserSelect enum).
  694.                 [out] Period    : The period of the pulse in time units.
  695.                 [out] Width     : The width of the pulse in time units.
  696.                 [out] Unit      : The time unit for the pulser configuration (see
  697.                                   CVTimeUnits enum).
  698.                 [out] PulseNo   : The number of pulses to generate (0 = infinite).
  699.                 [out] Start     : The source signal to start the pulse burst (see
  700.                                   CVIOSources enum).
  701.                 [out] Reset     : The source signal to stop the pulse burst (see
  702.                                   CVIOSources enum).
  703.         -----------------------------------------------------------------------------
  704.         Returns:
  705.                 An error code about the execution of the function.
  706.         -----------------------------------------------------------------------------
  707.         Description:
  708.                 The function permits to read the configuration of the pulsers.
  709. */
  710. CAENVME_API
  711. CAENVME_GetPulserConf(int32_t Handle, CVPulserSelect PulSel, unsigned char *Period,
  712.                       unsigned char *Width, CVTimeUnits *Unit, unsigned char *PulseNo,
  713.                       CVIOSources *Start, CVIOSources *Reset);
  714.  
  715. /*
  716.         CAENVME_GetScalerConf
  717.         -----------------------------------------------------------------------------
  718.         Parameters:
  719.                 [in]  Handle    : The handle that identifies the device.
  720.                 [out] Limit     : The counter limit for the scaler.
  721.                 [out] AutoReset : The auto reset configuration.
  722.                 [out] Hit       : The source signal for the signal to count (see
  723.                                   CVIOSources enum).
  724.                 [out] Gate      : The source signal for the gate (see CVIOSources enum).
  725.                 [out] Reset     : The source signal to stop the counter (see
  726.                                   CVIOSources enum).
  727.         -----------------------------------------------------------------------------
  728.         Returns:
  729.                 An error code about the execution of the function.
  730.         -----------------------------------------------------------------------------
  731.         Description:
  732.                 The function permits to read the configuration of the scaler.
  733. */
  734. CAENVME_API
  735. CAENVME_GetScalerConf(int32_t Handle, short *Limit, short *AutoReset,
  736.                       CVIOSources *Hit, CVIOSources *Gate, CVIOSources *Reset);
  737.  
  738.  
  739. /*
  740.         CAENVME_SetOutputConf
  741.         -----------------------------------------------------------------------------
  742.         Parameters:
  743.                 [in]  Handle    : The handle that identifies the device.
  744.                 [in]  OutSel    : The output line to configure (see CVOutputSelect enum).
  745.                 [out] OutPol    : The output line polarity (see CVIOPolarity enum).
  746.                 [out] LEDPol    : The output LED polarity (see CVLEDPolarity enum).
  747.                 [out] Source    : The source signal to propagate to the output line (see
  748.                                   CVIOSources enum).
  749.         -----------------------------------------------------------------------------
  750.         Returns:
  751.                 An error code about the execution of the function.
  752.         -----------------------------------------------------------------------------
  753.         Description:
  754.                 The function permits to read the configuration of the output lines.
  755. */
  756. CAENVME_API
  757. CAENVME_GetOutputConf(int32_t Handle, CVOutputSelect OutSel, CVIOPolarity *OutPol,
  758.                       CVLEDPolarity *LEDPol, CVIOSources *Source);
  759.  
  760. /*
  761.         CAENVME_SetInputConf
  762.         -----------------------------------------------------------------------------
  763.         Parameters:
  764.                 [in]  Handle    : The handle that identifies the device.
  765.                 [in]  InSel     : The input line to configure (see CVInputSelect enum).
  766.                 [out] InPol     : The input line polarity (see CVIOPolarity enum).
  767.                 [out] LEDPol    : The output LED polarity (see CVLEDPolarity enum).
  768.         -----------------------------------------------------------------------------
  769.         Returns:
  770.                 An error code about the execution of the function.
  771.         -----------------------------------------------------------------------------
  772.         Description:
  773.                 The function permits to read the configuration of the input lines.
  774. */
  775. CAENVME_API
  776. CAENVME_GetInputConf(int32_t Handle, CVInputSelect InSel, CVIOPolarity *InPol,
  777.                      CVLEDPolarity *LEDPol);
  778.  
  779. /*
  780.         CAENVME_ReadRegister
  781.         -----------------------------------------------------------------------------
  782.         Parameters:
  783.                 [in]  Handle    : The handle that identifies the device.
  784.                 [in]  Reg       : The internal register to read (see CVRegisters enum).
  785.                 [out] Data      : The data read from the module.
  786.         -----------------------------------------------------------------------------
  787.         Returns:
  788.                 An error code about the execution of the function.
  789.         -----------------------------------------------------------------------------
  790.         Description:
  791.                 The function permits to read all internal registers.
  792. */
  793. CAENVME_API
  794. CAENVME_ReadRegister(int32_t Handle, CVRegisters Reg, unsigned int *Data);
  795.  
  796. /*
  797.         CAENVME_WriteRegister
  798.         -----------------------------------------------------------------------------
  799.         Parameters:
  800.                 [in]  Handle    : The handle that identifies the device.
  801.                 [in]  Reg       : The internal register to read (see CVRegisters enum).
  802.                 [in]  Data      : The data to be written to the module.
  803.         -----------------------------------------------------------------------------
  804.         Returns:
  805.                 An error code about the execution of the function.
  806.         -----------------------------------------------------------------------------
  807.         Description:
  808.                 The function permits to write to all internal registers.
  809. */
  810. CAENVME_API
  811. CAENVME_WriteRegister(int32_t Handle, CVRegisters Reg, unsigned int Data);
  812.  
  813. /*
  814.         CAENVME_SetOutputRegister
  815.         -----------------------------------------------------------------------------
  816.         Parameters:
  817.                 [in]  Handle    : The handle that identifies the device.
  818.                 [in]  Mask      : The lines to be set.
  819.         -----------------------------------------------------------------------------
  820.         Returns:
  821.                 An error code about the execution of the function.
  822.         -----------------------------------------------------------------------------
  823.         Description:
  824.                 The function sets the lines specified. Refer the CVOutputRegisterBits
  825.                 enum to compose and decoding the bit mask.
  826. */
  827. CAENVME_API
  828. CAENVME_SetOutputRegister(int32_t Handle, unsigned short Mask);
  829.  
  830. /*
  831.         CAENVME_ClearOutputRegister
  832.         -----------------------------------------------------------------------------
  833.         Parameters:
  834.                 [in]  Handle    : The handle that identifies the device.
  835.                 [in]  Mask      : The IRQ lines to be cleared.
  836.         -----------------------------------------------------------------------------
  837.         Returns:
  838.                 An error code about the execution of the function.
  839.         -----------------------------------------------------------------------------
  840.         Description:
  841.                 The function clears the lines specified. Refer the CVOutputRegisterBits
  842.                 enum to compose and decoding the bit mask.
  843. */
  844. CAENVME_API
  845. CAENVME_ClearOutputRegister(int32_t Handle, unsigned short Mask);
  846.  
  847. /*
  848.         CAENVME_PulseOutputRegister
  849.         -----------------------------------------------------------------------------
  850.         Parameters:
  851.                 [in]  Handle    : The handle that identifies the device.
  852.                 [in]  Mask      : The lines to be pulsed.
  853.         -----------------------------------------------------------------------------
  854.         Returns:
  855.                 An error code about the execution of the function.
  856.         -----------------------------------------------------------------------------
  857.         Description:
  858.                 The function produces a pulse with the lines specified by setting and
  859.                 then clearing them. Refer the CVOutputRegisterBits enum to compose and
  860.                 decoding the bit mask.
  861. */
  862. CAENVME_API
  863. CAENVME_PulseOutputRegister(int32_t Handle, unsigned short Mask);
  864.  
  865. /*
  866.         CAENVME_ReadDisplay
  867.         -----------------------------------------------------------------------------
  868.         Parameters:
  869.                 [in]  Handle    : The handle that identifies the device.
  870.                 [out] Value     : The values read from the module (see CVDisplay enum).
  871.         -----------------------------------------------------------------------------
  872.         Returns:
  873.                 An error code about the execution of the function.
  874.         -----------------------------------------------------------------------------
  875.         Description:
  876.                 The function reads the VME data display on the front panel of the module.
  877.                 Refer to the CVDisplay data type definition and comments to decode the
  878.                 value returned.
  879. */
  880. CAENVME_API
  881. CAENVME_ReadDisplay(int32_t Handle, CVDisplay *Value);
  882.  
  883. /*
  884.         CAENVME_SetArbiterType
  885.         -----------------------------------------------------------------------------
  886.         Parameters:
  887.                 [in]  Handle    : The handle that identifies the device.
  888.                 [in]  Value     : The type of VME bus arbitration to implement (see
  889.                                   CVArbiterTypes enum).
  890.         -----------------------------------------------------------------------------
  891.         Returns:
  892.                 An error code about the execution of the function.
  893.         -----------------------------------------------------------------------------
  894.         Description:
  895.                 The function sets the behaviour of the VME bus arbiter on the module.
  896. */
  897. CAENVME_API
  898. CAENVME_SetArbiterType(int32_t Handle, CVArbiterTypes Value);
  899.  
  900. /*
  901.         CAENVME_SetRequesterType
  902.         -----------------------------------------------------------------------------
  903.         Parameters:
  904.                 [in]  Handle    : The handle that identifies the device.
  905.                 [in]  Value     : The type of VME bus requester to implement (see
  906.                                   CVRequesterTypes enum).
  907.         -----------------------------------------------------------------------------
  908.         Returns:
  909.                 An error code about the execution of the function.
  910.         -----------------------------------------------------------------------------
  911.         Description:
  912.                 The function sets the behaviour of the VME bus requester on the module.
  913. */
  914. CAENVME_API
  915. CAENVME_SetRequesterType(int32_t Handle, CVRequesterTypes Value);
  916.  
  917. /*
  918.         CAENVME_SetReleaseType
  919.         -----------------------------------------------------------------------------
  920.         Parameters:
  921.                 [in]  Handle    : The handle that identifies the device.
  922.                 [in]  Value     : The type of VME bus release policy to implement (see
  923.                                   CVReleaseTypes enum).
  924.         -----------------------------------------------------------------------------
  925.         Returns:
  926.                 An error code about the execution of the function.
  927.         -----------------------------------------------------------------------------
  928.         Description:
  929.                 The function sets the release policy of the VME bus on the module.
  930. */
  931. CAENVME_API
  932. CAENVME_SetReleaseType(int32_t Handle, CVReleaseTypes Value);
  933.  
  934. /*
  935.         CAENVME_SetBusReqLevel
  936.         -----------------------------------------------------------------------------
  937.         Parameters:
  938.                 [in]  Handle    : The handle that identifies the device.
  939.                 [in]  Value     : The type of VME bus requester priority level to set
  940.                                   (see CVBusReqLevels enum).
  941.         -----------------------------------------------------------------------------
  942.         Returns:
  943.                 An error code about the execution of the function.
  944.         -----------------------------------------------------------------------------
  945.         Description:
  946.                 The function sets the specified VME bus requester priority level on
  947.                 the module.
  948. */
  949. CAENVME_API
  950. CAENVME_SetBusReqLevel(int32_t Handle, CVBusReqLevels Value);
  951.  
  952. /*
  953.         CAENVME_SetTimeout
  954.         -----------------------------------------------------------------------------
  955.         Parameters:
  956.                 [in]  Handle    : The handle that identifies the device.
  957.                 [in]  Value     : The value of VME bus timeout to set (see
  958.                                   CVVMETimeouts enum).
  959.         -----------------------------------------------------------------------------
  960.         Returns:
  961.                 An error code about the execution of the function.
  962.         -----------------------------------------------------------------------------
  963.         Description:
  964.                 The function sets the specified VME bus timeout on the module.
  965. */
  966. CAENVME_API
  967. CAENVME_SetTimeout(int32_t Handle, CVVMETimeouts Value);
  968.  
  969. /*
  970.         CAENVME_SetLocationMonitor
  971.         -----------------------------------------------------------------------------
  972.         Parameters:
  973.                 [in]  Handle    : The handle that identifies the device.
  974.                 [in]  Address   : The addres to be monitored.
  975.                 [in]  Write     : Flag to specify read or write cycle types.
  976.                 [in]  Lword     : Flag to specify long word cycle type.
  977.                 [in]  Iack      : Flag to specify interrupt acknowledge cycle type.
  978.  
  979.         -----------------------------------------------------------------------------
  980.         Returns:
  981.                 An error code about the execution of the function.
  982.         -----------------------------------------------------------------------------
  983.         Description:
  984.                 The function sets the Location Monitor.
  985. */
  986. CAENVME_API
  987. CAENVME_SetLocationMonitor(int32_t Handle, uint32_t Address, CVAddressModifier Am,
  988.                            short Write, short Lword, short Iack);
  989. /*
  990.         CAENVME_SetFIFOMode
  991.         -----------------------------------------------------------------------------
  992.         Parameters:
  993.                 [in]  Handle    : The handle that identifies the device.
  994.                 [in]  Value     : Enable/disable the FIFO mode.
  995.         -----------------------------------------------------------------------------
  996.         Returns:
  997.                 An error code about the execution of the function.
  998.         -----------------------------------------------------------------------------
  999.         Description:
  1000.                 The function enables/disables the auto increment of the VME addresses
  1001.                 during the block transfer cycles. With the FIFO mode enabled the
  1002.                 addresses are not incremented.
  1003. */
  1004. CAENVME_API
  1005. CAENVME_SetFIFOMode(int32_t Handle, short Value);
  1006.  
  1007. /*
  1008.         CAENVME_GetArbiterType
  1009.         -----------------------------------------------------------------------------
  1010.         Parameters:
  1011.                 [in]  Handle    : The handle that identifies the device.
  1012.                 [out] Value     : The type of VME bus arbitration implemented (see
  1013.                                   CVArbiterTypes enum).
  1014.         -----------------------------------------------------------------------------
  1015.         Returns:
  1016.                 An error code about the execution of the function.
  1017.         -----------------------------------------------------------------------------
  1018.         Description:
  1019.                 The function get the type of VME bus arbiter implemented on the module.
  1020. */
  1021. CAENVME_API
  1022. CAENVME_GetArbiterType(int32_t Handle, CVArbiterTypes *Value);
  1023.  
  1024. /*
  1025.         CAENVME_GetRequesterType
  1026.         -----------------------------------------------------------------------------
  1027.         Parameters:
  1028.                 [in]  Handle    : The handle that identifies the device.
  1029.                 [out] Value     : The type of VME bus requester implemented (see
  1030.                                   CVRequesterTypes enum).
  1031.         -----------------------------------------------------------------------------
  1032.         Returns:
  1033.                 An error code about the execution of the function.
  1034.         -----------------------------------------------------------------------------
  1035.         Description:
  1036.                 The function get the type of VME bus requester implemented on the module.
  1037. */
  1038. CAENVME_API
  1039. CAENVME_GetRequesterType(int32_t Handle, CVRequesterTypes *Value);
  1040.  
  1041. /*
  1042.         CAENVME_GetReleaseType
  1043.         -----------------------------------------------------------------------------
  1044.         Parameters:
  1045.                 [in]  Handle    : The handle that identifies the device.
  1046.                 [out] Value     : The type of VME bus release policy implemented (see
  1047.                                   CVReleaseTypes enum).
  1048.         -----------------------------------------------------------------------------
  1049.         Returns:
  1050.                 An error code about the execution of the function.
  1051.         -----------------------------------------------------------------------------
  1052.         Description:
  1053.                 The function get the type of VME bus release implemented on the module.
  1054. */
  1055. CAENVME_API
  1056. CAENVME_GetReleaseType(int32_t Handle, CVReleaseTypes *Value);
  1057.  
  1058. /*
  1059.         CAENVME_GetBusReqLevel
  1060.         -----------------------------------------------------------------------------
  1061.         Parameters:
  1062.                 [in]  Handle    : The handle that identifies the device.
  1063.                 [out] Value     : The type of VME bus requester priority level (see
  1064.                                   CVBusReqLevels enum).
  1065.         -----------------------------------------------------------------------------
  1066.         Returns:
  1067.                 An error code about the execution of the function.
  1068.         -----------------------------------------------------------------------------
  1069.         Description:
  1070.                 The function reads the specified VME bus requester priority level on
  1071.                 the module.
  1072. */
  1073. CAENVME_API
  1074. CAENVME_GetBusReqLevel(int32_t Handle, CVBusReqLevels *Value);
  1075.  
  1076. /*
  1077.         CAENVME_GetTimeout
  1078.         -----------------------------------------------------------------------------
  1079.         Parameters:
  1080.                 [in]  Handle    : The handle that identifies the device.
  1081.                 [out] Value     : The value of VME bus timeout (see CVVMETimeouts enum).
  1082.         -----------------------------------------------------------------------------
  1083.         Returns:
  1084.                 An error code about the execution of the function.
  1085.         -----------------------------------------------------------------------------
  1086.         Description:
  1087.                 The function sets the specified VME bus timeout on the module.
  1088. */
  1089. CAENVME_API
  1090. CAENVME_GetTimeout(int32_t Handle, CVVMETimeouts *Value);
  1091.  
  1092. /*
  1093.         CAENVME_GetFIFOMode
  1094.         -----------------------------------------------------------------------------
  1095.         Parameters:
  1096.                 [in]  Handle    : The handle that identifies the device.
  1097.                 [out] Value     : The FIFO mode read setting.
  1098.         -----------------------------------------------------------------------------
  1099.         Returns:
  1100.                 An error code about the execution of the function.
  1101.         -----------------------------------------------------------------------------
  1102.         Description:
  1103.                 The function read if the auto increment of the VME addresses during the
  1104.                 block transfer cycles is enabled (0) or disabled (!=0).
  1105. */
  1106. CAENVME_API
  1107. CAENVME_GetFIFOMode(int32_t Handle, short *Value);
  1108.  
  1109. /*
  1110.         CAENVME_SystemReset
  1111.         -----------------------------------------------------------------------------
  1112.         Parameters:
  1113.                 [in]  Handle    : The handle that identifies the device.
  1114.         -----------------------------------------------------------------------------
  1115.         Returns:
  1116.                 An error code about the execution of the function.
  1117.         -----------------------------------------------------------------------------
  1118.         Description:
  1119.                 The function performs a system reset on the module.
  1120. */
  1121. CAENVME_API
  1122. CAENVME_SystemReset(int32_t Handle);
  1123.  
  1124. /*
  1125.         CAENVME_ResetScalerCount
  1126.         -----------------------------------------------------------------------------
  1127.         Parameters:
  1128.                 [in]  Handle    : The handle that identifies the device.
  1129.         -----------------------------------------------------------------------------
  1130.         Returns:
  1131.                 An error code about the execution of the function.
  1132.         -----------------------------------------------------------------------------
  1133.         Description:
  1134.                 The function resets the counter of the scaler..
  1135. */
  1136. CAENVME_API
  1137. CAENVME_ResetScalerCount(int32_t Handle);
  1138.  
  1139. /*
  1140.         CAENVME_EnableScalerGate
  1141.         -----------------------------------------------------------------------------
  1142.         Parameters:
  1143.                 [in]  Handle    : The handle that identifies the device.
  1144.         -----------------------------------------------------------------------------
  1145.         Returns:
  1146.                 An error code about the execution of the function.
  1147.         -----------------------------------------------------------------------------
  1148.         Description:
  1149.                 The function enables the gate of the scaler.
  1150. */
  1151. CAENVME_API
  1152. CAENVME_EnableScalerGate(int32_t Handle);
  1153.  
  1154. /*
  1155.         CAENVME_DisableScalerGate
  1156.         -----------------------------------------------------------------------------
  1157.         Parameters:
  1158.                 [in]  Handle    : The handle that identifies the device.
  1159.         -----------------------------------------------------------------------------
  1160.         Returns:
  1161.                 An error code about the execution of the function.
  1162.         -----------------------------------------------------------------------------
  1163.         Description:
  1164.                 The function disables the gate of the scaler.
  1165. */
  1166. CAENVME_API
  1167. CAENVME_DisableScalerGate(int32_t Handle);
  1168.  
  1169. /*
  1170.         CAENVME_StartPulser
  1171.         -----------------------------------------------------------------------------
  1172.         Parameters:
  1173.                 [in]  Handle    : The handle that identifies the device.
  1174.                 [in]  PulSel    : The pulser to configure (see CVPulserSelect enum).
  1175.         -----------------------------------------------------------------------------
  1176.         Returns:
  1177.                 An error code about the execution of the function.
  1178.         -----------------------------------------------------------------------------
  1179.         Description:
  1180.                 The function starts the generation of pulse burst if the specified
  1181.                 pulser is configured for manual/software operation.
  1182. */
  1183. CAENVME_API
  1184. CAENVME_StartPulser(int32_t Handle, CVPulserSelect PulSel);
  1185.  
  1186. /*
  1187.         CAENVME_StopPulser
  1188.         -----------------------------------------------------------------------------
  1189.         Parameters:
  1190.                 [in]  Handle    : The handle that identifies the device.
  1191.                 [in]  PulSel    : The pulser to configure (see CVPulserSelect enum).
  1192.         -----------------------------------------------------------------------------
  1193.         Returns:
  1194.                 An error code about the execution of the function.
  1195.         -----------------------------------------------------------------------------
  1196.         Description:
  1197.                 The function stops the generation of pulse burst if the specified
  1198.                 pulser is configured for manual/software operation.
  1199. */
  1200. CAENVME_API
  1201. CAENVME_StopPulser(int32_t Handle, CVPulserSelect PulSel);
  1202.  
  1203. /*
  1204.         CAENVME_WriteFlashPage
  1205.         -----------------------------------------------------------------------------
  1206.         Parameters:
  1207.                 [in]  Handle    : The handle that identifies the device.
  1208.                 [in]  Data      : The data to write.
  1209.                 [in]  PageNum   : The flash page number to write.
  1210.         -----------------------------------------------------------------------------
  1211.         Returns:
  1212.                 An error code about the execution of the function.
  1213.         -----------------------------------------------------------------------------
  1214.         Description:
  1215.                 The function writes the data into the specified flash page.
  1216. */
  1217. CAENVME_API
  1218. CAENVME_WriteFlashPage(int32_t Handle, unsigned char *Data, int PageNum);
  1219.  
  1220. /*
  1221.         CAENVME_ReadFlashPage
  1222.         -----------------------------------------------------------------------------
  1223.         Parameters:
  1224.                 [in]  Handle    : The handle that identifies the device.
  1225.                 [out] Data      : The data to write.
  1226.                 [in]  PageNum   : The flash page number to write.
  1227.         -----------------------------------------------------------------------------
  1228.         Returns:
  1229.                 An error code about the execution of the function.
  1230.         -----------------------------------------------------------------------------
  1231.         Description:
  1232.                 The function reads the data from the specified flash page.
  1233. */
  1234. CAENVME_API
  1235. CAENVME_ReadFlashPage(int32_t Handle, unsigned char *Data, int PageNum);
  1236.  
  1237. /*
  1238.         CAENVME_EraseFlashPage
  1239.         -----------------------------------------------------------------------------
  1240.         Parameters:
  1241.                 [in]  Handle    : The handle that identifies the device.
  1242.                 [in]  PageNum   : The flash page number to write.
  1243.         -----------------------------------------------------------------------------
  1244.         Returns:
  1245.                 An error code about the execution of the function.
  1246.         -----------------------------------------------------------------------------
  1247.         Description:
  1248.                 The function erases the specified flash page.
  1249. */
  1250. CAENVME_API
  1251. CAENVME_EraseFlashPage(int32_t Handle, int Pagenum);
  1252.  
  1253. #ifdef LINUX
  1254. /*
  1255.         CAENVME_BLTReadAsync
  1256.         -----------------------------------------------------------------------------
  1257.         Parameters:
  1258.                 [in]  Handle    : The handle that identifies the device.
  1259.                 [in]  Address   : The VME bus address.
  1260.                 [out] Buffer    : The data read from the VME bus.
  1261.                 [in]  Size      : The size of the transfer in bytes.
  1262.                 [in]  AM        : The address modifier (see CVAddressModifier enum).
  1263.                 [in]  DW        : The data width.(see CVDataWidth enum).
  1264.         -----------------------------------------------------------------------------
  1265.         Returns:
  1266.                 An error code about the execution of the function.
  1267.         -----------------------------------------------------------------------------
  1268.         Description:
  1269.                 The function starts a VME block transfer read cycle. It can be used
  1270.                 to perform MBLT transfers using 64 bit data width.
  1271.                 This function cannot be used with the V1718 USB bridge.
  1272.                 This function can be used only on Linux platforms.
  1273.                 Take care to call the CAENVME_BLTReadWait function before any other
  1274.                 call to a CAENVMElib function with the same handle.
  1275. */
  1276. CAENVME_API
  1277. CAENVME_BLTReadAsync(int32_t Handle, uint32_t Address, void *Buffer,
  1278.                      int Size, CVAddressModifier AM, CVDataWidth DW);
  1279.  
  1280. /*
  1281.         CAENVME_BLTReadWait
  1282.         -----------------------------------------------------------------------------
  1283.         Parameters:
  1284.                 [in]  Handle    : The handle that identifies the device.
  1285.                 [out] Count     : The number of bytes transferred.
  1286.         -----------------------------------------------------------------------------
  1287.         Returns:
  1288.                 An error code about the execution of the function.
  1289.         -----------------------------------------------------------------------------
  1290.         Description:
  1291.                 The function wait for the completion of a VME block transfer read
  1292.                 cycle started with the CAENVME_BLTReadAsync function call.
  1293.                 This function cannot be used with the V1718 USB bridge.
  1294.                 This function can be used only on Linux platforms.
  1295. */
  1296. CAENVME_API
  1297. CAENVME_BLTReadWait(int32_t Handle, int *Count);
  1298.  
  1299. #endif
  1300.  
  1301. #ifdef __cplusplus
  1302. }
  1303. #endif // __cplusplus
  1304.  
  1305. #endif // __CAENVMELIB_H
  1306.