WebSVN - f9daq - Rev 264 - /cvi/apps/petdemo/vmusb.c

//#define XXDLL
//#include "vme.h"

typedef unsigned short ADDRESS_MODIFIER;
#define Std_NoPriv_Data (ADDRESS_MODIFIER)0x39

#include "wusbvme_dll.h"
#include "toolbox.h"
#include <stdio.h>
#include <stdlib.h>
#include <string.h>

#include <errno.h>
#include <ctype.h>
#include <time.h>

#include <signal.h>

#include "CAENV965_DEF.h"

#include "petdemo_uir.h"
#include "daq.h"

extern int p1;
extern int ctrl_c;

#define VERSION 1.0
#define TIMEOUT 3

int *fThreshold = NULL;

/* VME modules */

#define CAEN_V792 0x340000 // IJS V792
#define CAEN_V792_1 0x530000 // FMF1 V792
#define CAEN_V792_2 0x630000 // FMF2 V792
#define CAEN_V965 0x350000 // IJS V965
int addr[3]= {CAEN_V792,CAEN_V792_1,CAEN_V965 };
const int nadc=2;
#define BUFF_L 2048
static int stackwrite[10000];
static int stackdata[10000],stackdump[27000];

/************************************************/
int weight_while(int num) {
int i, tmp;

for ( i =0; i <num; i++ ) tmp = 0;
return 0;
}
#define WWHILE weight_while(0)

#define TRUE 1
#define FALSE 0

int timer_out;

void timerast (int signumber) {
timer_out = TRUE;
fprintf(stderr,"TIMEOUT !!!\n");
}

void tmlnk (int tout) {

}

void tmulk () {

}

int fexist( char *path) {

if(!path || !*path) return 0;
ssize_t fileSize;
int res = FileExists (path, &fileSize);

if (res>0) {
return 1;
} else {
return 0;
}
}

int init() {

xxusb_register_write(WUSB_udev,1,0x0); // Stop DAQ mode
while (xxusb_usbfifo_read(WUSB_udev,(int *) stackdump,BUFF_L,100)>0);

int rate=1000;
int freq=80000000/rate-40; // 80 MHz
if (freq<72) freq=72;
// Set DGG channel A as a pulser, output on O1,
// with delay =500 x 12.5ns,
// and width = 500 x 12.5ns,
// not latching or inverting
// VME_DGG(udev,0,6,0,24000,6000,0,0);
VME_DGG(WUSB_udev,0,6,0,freq,40,0,0);
// Set DGG channel B to trigger on NIM1, output on O2,
// with delay =200 x 12.5ns,
// and width = 200 x 12.5ns,
// not latching or inverting
VME_DGG(WUSB_udev,1,1,1,0,10,0,1);
printf("CAEN V965 Pedestal set to %d\n", fPedestal);

// INIT stackdata
int fPedestal=255;
WIENER_VMUSB_StackInit();

for (int i=0; i<nadc; i++) {
WIENER_VMUSB_StackWriteA24D16( addr[i] + CAENV965_CRN , 0x0);
WIENER_VMUSB_StackWriteA24D16( addr[i] + CAENV965_GEO , i);
WIENER_VMUSB_StackReadA24D16(addr[i] + CAENV965_GEO);
for (int j=0; j<32; j++) {
WIENER_VMUSB_StackWriteA24D16(addr[i] + CAENV965_THM + 0x02*j, fThreshold[j+i*32]); // threshold/kill for 32 channels
}
WIENER_VMUSB_StackWriteA24D16( addr[i] + CAENV965_BS1, 0x80 ); // soft reset
WIENER_VMUSB_StackWriteA24D16( addr[i] + CAENV965_BC1, 0x80 ); // soft reset
WIENER_VMUSB_StackWriteA24D16( addr[i] + CAENV965_PED, fPedestal ); // pedestal
WIENER_VMUSB_StackWriteA24D16( addr[i] + CAENV965_BS2,0x5000);
WIENER_VMUSB_StackWriteA24D16( addr[i] + CAENV965_BS2,0x4); // clear module
WIENER_VMUSB_StackWriteA24D16( addr[i] + CAENV965_BC2,0x4);
}
WIENER_VMUSB_StackMarker(0xFAFC);
//WIENER_VMUSB_StackPrint();

VME_LED_settings(WUSB_udev, 0,0,0,0); // Set Yellow LED to light with with USB out buffer not empty
VME_LED_settings(WUSB_udev, 1,1,0,0); // Set Red LED to light with NIM1
VME_LED_settings(WUSB_udev,2,0,0,0); // Set Green LED to light when stack is not empty

unsigned int vmereg;
VME_register_read(WUSB_udev,0x00,&vmereg);
printf("VMUSB Firmware ID -> 0x%08X\n",vmereg);

VME_register_read(WUSB_udev,0x04,&vmereg);
printf("VMUSB Global Mode -> 0x%08X\n",vmereg);

vmereg=(vmereg&0xF000)|0x0004;
VME_register_write(WUSB_udev,0x04,vmereg);
VME_register_write(WUSB_udev,0x08,0x00000080);
VME_register_write(WUSB_udev,0x28,0x0);
VME_register_write(WUSB_udev,0x2C,0x0);
VME_register_write(WUSB_udev,0x30,0x0);
VME_register_write(WUSB_udev,0x34,0x0);
VME_register_write(WUSB_udev,0x3C,0x000);

int nb = WIENER_VMUSB_StackGetUint32(10000,stackdata);
int ret= xxusb_stack_execute(WUSB_udev,(uint32_t *)stackdata);
printf("Init::%d ret=%d\n",nb,ret);
if (ret>0) for (int k=0; k<ret/2; k++) printf ("stackdata=0x%08X\n",stackdata[k]);

WIENER_VMUSB_StackClear();
WIENER_VMUSB_StackMarker(0xFFAB);
for (int j=0; j<36; j++) WIENER_VMUSB_StackReadA24D32(addr[0] + CAENV965_OB);
WIENER_VMUSB_StackMarker(0xFAFB);
for (int k0=0; k0<nadc; k0++) {
WIENER_VMUSB_StackWriteA24D16(addr[k0] + CAENV965_BS2,0x4); // clear module
WIENER_VMUSB_StackWriteA24D16(addr[k0] + CAENV965_BC2,0x4);
}

int nb0= WIENER_VMUSB_StackGetUint32(10000,&stackwrite[0]);
if (nb0>768) {
fprintf(stderr,"nb0=%d > 768 error xxusb_stack_write\n", nb0);
exit(-1);
}
nb =xxusb_stack_write(WUSB_udev,0x2,(uint32_t *) stackwrite);
nb0=xxusb_stack_read(WUSB_udev,0x2,(uint32_t *) stackdata);
for (int k1=0; k1<stackwrite[0]+1; k1++) {
if (stackdata[k1]!=stackwrite[k1]) printf("%d %d init err %x %x\n",nb,nb0,
stackwrite[k1], stackdata[k1]);
}

if (fMode==2) xxusb_register_write(WUSB_udev,1,0x1); // Start DAQ mode

printf("daq::init() \n");
return 0;
}

int vmconnect() {
WIENER_VMUSB_VME_START("VM0120");
//VME_START(WIENER_VMUSB);

printf("daq::connect()\n");
return 0;
}

int vmdisconnect() {
/* zakljuci */
WIENER_VMUSB_VME_STOP();
printf("daq::disconnect()\n");
return 0;
}

int clear() {
return 0;
}

int module_header(int recid,uint32_t *data,int len) {
data[0] = recid;
data[1] = (len >0)? len : 0 ;
return data[1]+2;
}

int event(unsigned int *data, int maxn, int *ctr, int print) {
int tout=200; /* 1/100 of a second */
const int lsize=sizeof(uint32_t);

ctr[0]++;
ctr[1]++;

int count=0;
switch (fMode) {
case 0: { // normal calls
unsigned short clr= 0x4;
unsigned int status=0;
uint32_t mdata;

for (int i=0; i<nadc; i++) {
// wait for trg
tmlnk (tout);
do WIENER_VMUSB_VME_A24D16_R( addr[i] + CAENV965_SR1, &status);
while ( (status&0x1)==0 && timer_out==0 && ctrl_c==0 );
tmulk();
// readout data
if (timer_out) return 0;
if (ctrl_c) return 0;
int len=0;

do {
WIENER_VMUSB_VME_A24D32_R(addr[i] + CAENV965_OB, &mdata);
mdata=data[count++];
len++;
} while ( (mdata & 0x4000000)==0 && timer_out==0) ; // bit 26 EOB or not valid datum
// clear
WIENER_VMUSB_VME_A24D16_W( addr[i] + CAENV965_BS2, &clr);
WIENER_VMUSB_VME_A24D16_W( addr[i] + CAENV965_BC2, &clr);

if (count+2<maxn) {
if (print) printf("V965 %3d\n",len);
count+=module_header(0x130+i,&data[count],len);
ctr[2]++;
ctr[3]+=len;
}

timer_out=0;
}
}
break;
case 1: { // stack execute
WIENER_VMUSB_StackGetUint32(10000,(int *)data);
int ret=xxusb_stack_execute(WUSB_udev,(uint32_t *) data); //The first element of the array is the number of bytes.
if (ret< 0 ) {
printf ("xxusb_stack_execute error err=%d\n",ret); \
count = 0;
} else count= ret/lsize;

}
break;
case 2: { // stack load
int ret=xxusb_usbfifo_read(WUSB_udev,(int *) data,BUFF_L,100);
if (ret< 0 ) {
if (ret!=-110) {
printf ("xxusb_usbfifo_read error err=%d\n",ret);
end();
init();
}
count = 0;
} else {
if (debug) {
for (int i=0; i<100; i++) {
printf ("%4d fifodata=0x%08X\n",i, data[i]);
if (data[i]==0xFAFB) break;
}
/*

0 fifodata=0x0000000D
1 fifodata=0x00000049
2 fifodata=0x0000FFAB
3 fifodata=0x00002000
4 fifodata=0x00000200
5 fifodata=0x00004141
6 fifodata=0x00000000
7 fifodata=0x00004057

70 fifodata=0x00000400
71 fifodata=0x00000035
72 fifodata=0x00000600
73 fifodata=0x00000035
74 fifodata=0x0000FAFB

*/
}
static double t0=0;
static int nc =0;
nc += data[0];
if (print) {
//printf("##------------------ret=%d data[0]=%d\n",ret,(int)data[0]);
double t1 = Timer();
double dt = t1-t0;
t0 = t1;
float rate = (dt>0)?nc/dt:0;

//printf("--------ret=%d data[0]=%f nc=%d dt=%f\n",ret,rate,nc,dt);
PlotStripChart (p1, P1_DAQRATE, &rate, 1, 0, 0,VAL_FLOAT);
nc =0;
}
count= ret/lsize;
ctr[2]+=data[0];
ctr[3]+=count;
}
}
break;
}
return count*lsize;
}

int end() {

xxusb_register_write(WUSB_udev,1,0x0); // Stop DAQ mode
while (xxusb_usbfifo_read(WUSB_udev,(int *) stackdata,BUFF_L,30)>0);
printf("daq::end()\n");
return 0;
}

int vmacquire (int neve,FILE *fp, char *fpedname) {
// neve .... negative argument time ( in s )limited event loop
if (fThreshold== NULL) fThreshold = (int *) malloc (sizeof(int)*128);
// print welcome message
time_t t, told;
double tstart, tstop;
time(&t);
fThresholdEnable=0;

#define BSIZE 10000
uint32_t data[10000];

fMode = 2;
fPedestal=255;
for (int ki=0; ki<128; ki++) {
if (ki<72) fThreshold[ki]=0;
else fThreshold[ki]=0x1<<8; // samo 4 kanali na zadnjem modulu so enablani
}
fThresholdEnable=0;
fStop=0;

if (fpedname !=NULL) {

FILE *fped=fopen(fpedname,"r");

int j=0;
int ndim=400;
char line[ndim];
int val=0;
while (fgets(line,ndim,fped)!=NULL) {
sscanf(line,"%d",&val);
fThreshold[j++]=val;
}
fThresholdEnable=1;
fclose(fped);

}

init();

int hdr[4]= {2}; // recid
int i=0;
int ntotal=0;
int counters[30]= {0,0,0,0,0, 0,0,0,0,0,0,0};
char names[10][20]= {"TRG","CAEN V965"};
time(&t);
tstart=Timer();
told =t;
tstop=tstart+360000;
if (neve<-1) {
tstop=tstart-neve;
neve=-1;
}
for (i=0; i!=neve && !ctrl_c && Timer()<tstop; i++) {
time(&t);
if (t!=told ) printf("%d in %2.2f min daq::event() %s\n",i, (double)(Timer()-tstart)/60., ctime(&t));
int nb=event(data,BSIZE, counters,t!=told);
analyse(nb, data);
if (nb>0) {
// zapis v datoteko
hdr[1]=nb+4*sizeof(int);
hdr[2]=time(NULL);
hdr[3]=i;

fwrite(hdr, 1, sizeof(int)*4, fp); //gzip
ntotal += fwrite(data,1, nb, fp);
told=t;
} else i--;
}

end();

printf("Number of Events: %d\n",i);
if (ctrl_c) printf("User Program termination CTRL-C\n");
if (Timer()>tstop ) printf("Timeout termination tstart# t>tstop: %d# %d >%d\n",(int)t, (int)tstart, (int) tstop);

printf("%d bytes written to file\nCounts:\n", (int) (ntotal*sizeof(int)));
for (i=0; i<2; i++) printf("%s\t%d\t%d\n",names[i],counters[2*i],counters[2*i+1]) ;

return 0;
}

Subversion Repositories f9daq

(root)/cvi/apps/petdemo/vmusb.c @ 354 - Rev 264