WebSVN – f9daq – Diff – /lab/sipmscan/trunk/src/sipmscan.cpp

 // Event handler for menubar actions ---------------------------------
 void TGAppMainFrame::HandleMenu(Int_t id)
+{
-//   int ret = 0;
+   int ret = 0;
    char cmd[256];
    switch(id)
+   {
       case M_FILE_SET_LAYOUT:
       case M_FILE_SAVE_LAYOUT:
          LayoutSave();
          break;
       case M_FILE_SAVE_MSETTINGS:
-         // Here, we save the set values in the measurement layout (automatically done when we safely exit the application and after each start of measurement).
+         SaveMeasSettings();
          break;
       case M_FILE_SAVE_ASETTINGS:
+         SaveAnalSettings();
+         break;
+      case M_FILE_DEF_MSETTINGS:
+         printf("Reseting measurement settings to default.\n");
+         sprintf(cmd, "cp %s/settings/default_measurement_settings.txt %s/settings/measurement_settings.txt", rootdir, rootdir);
+         ret = system(cmd);
+         break;
+      case M_FILE_DEF_ASETTINGS:
+         printf("Reseting analysis settings to default.\n");
-         // Here, we save the set values in the analysis layout (automatically done when we safely exit the application and after each start of analysis).
+         sprintf(cmd, "cp %s/settings/default_analysis_settings.txt %s/settings/analysis_settings.txt", rootdir, rootdir);
+         ret = system(cmd);
+         break;
+      case M_FILE_DEF_SETTINGS:
+         printf("Reseting all settings to default.\n");
+         sprintf(cmd, "cp %s/settings/default_measurement_settings.txt %s/settings/measurement_settings.txt", rootdir, rootdir);
+         ret = system(cmd);
+         sprintf(cmd, "cp %s/settings/default_analysis_settings.txt %s/settings/analysis_settings.txt", rootdir, rootdir);
+         ret = system(cmd);
          break;
       case M_FILE_CHECK_WIDTH:
          printf("\nSettings window: %dx%d\n", measLayout[0]->GetWidth(), measLayout[0]->GetHeight());
          printf("Histogram window: %dx%d\n", measLayout[1]->GetWidth(), measLayout[1]->GetHeight());
    fMenuFile->AddEntry(new TGHotString("Set &user layout"), M_FILE_SET_LAYOUT);
    fMenuFile->AddEntry(new TGHotString("Save &current layout"), M_FILE_SAVE_LAYOUT);
    fMenuFile->AddSeparator();
    fMenuFile->AddEntry(new TGHotString("Save current &measurement settings"), M_FILE_SAVE_MSETTINGS);
    fMenuFile->AddEntry(new TGHotString("Save current &analysis settings"), M_FILE_SAVE_ASETTINGS);
+   fMenuFile->AddEntry(new TGHotString("Set default measurement settings"), M_FILE_DEF_MSETTINGS);
+   fMenuFile->AddEntry(new TGHotString("Set default analysis settings"), M_FILE_DEF_ASETTINGS);
+   fMenuFile->AddEntry(new TGHotString("Set default settings"), M_FILE_DEF_SETTINGS);
    fMenuFile->AddEntry(new TGHotString("&Check frame width (Testing)"), M_FILE_CHECK_WIDTH);
    fMenuFile->AddSeparator();
    fMenuFile->AddEntry(new TGHotString("E&xit"), M_FILE_EXIT);
    // Popup menu in menubar for Analysis controls
    // X, Y and Z positions
    if(DBGSIG > 1) printf("AppLayout(): Creating TSubStructure *xPos, *yPos, *zPos, *zPosMin, *zPosMax, *zPosStep -> Settings for position and Z axis scan\n");
    fH2 = new TGCompositeFrame(fG1, 3*subgroup[0]/4, 30, kFixedWidth | kHorizontalFrame);
    xPos = new TSubStructure();
    for(int i = 0; i < 6; i++) numform[i] = 0;
-   numform[0] = 9; numform[3] = 2; numform[4] = -100; numform[5] = 215000;
+   numform[0] = 9; numform[3] = 2; numform[4] = -100; numform[5] = 375000; //numform[4] = -100; numform[5] = 215000;    // use commented part if Z is the longer axis and X the shorter
    if(xPos->TGLabelNEntry(fH2, 8*subgroup[0]/16, 30, "X:", 0, numform, "center"))
       fH2->AddFrame(xPos->outsidebox, f0centerX);
    zPosMin = new TSubStructure();
-   numform[5] = 375000;
+   numform[5] = 215000; //numform[5] = 375000;  // use commented part if Z is the longer axis and X the shorter
    if(zPosMin->TGLabelNEntry(fH2, 8*subgroup[0]/16, 30, "Z (min):", 0, numform, "center"))
       fH2->AddFrame(zPosMin->outsidebox, f0centerX);
    fG1->AddFrame(fH2, f1expandXpad);
    fH2 = new TGCompositeFrame(fG1, 3*subgroup[0]/4, 30, kFixedWidth | kHorizontalFrame);
    numform[5] = 215000;
    if(yPos->TGLabelNEntry(fH2, 8*subgroup[0]/16, 30, "Y:", 0, numform, "center"))
       fH2->AddFrame(yPos->outsidebox, f0centerX);
    zPosMax = new TSubStructure();
-   numform[5] = 375000;
+   numform[5] = 215000; //numform[5] = 375000;  // use commented part if Z is the longer axis and X the shorter
    if(zPosMax->TGLabelNEntry(fH2, 8*subgroup[0]/16, 30, "Z (max):", 0, numform, "center"))
       fH2->AddFrame(zPosMax->outsidebox, f0centerX);
    fG1->AddFrame(fH2, f1expandXpad);
    fH2 = new TGCompositeFrame(fG1, 3*subgroup[0]/4, 30, kFixedWidth | kHorizontalFrame);
    zPos = new TSubStructure();
-   numform[5] = 375000;
+   numform[5] = 215000; //numform[5] = 375000;  // use commented part if Z is the longer axis and X the shorter
    if(zPos->TGLabelNEntry(fH2, 8*subgroup[0]/16, 30, "Z:", 0, numform, "center"))
       fH2->AddFrame(zPos->outsidebox, f0centerX);
    zPosStep = new TSubStructure();
    for(int i = 0; i < 6; i++) numform[i] = 0;
    // Position scan controls
    if(DBGSIG > 1) printf("AppLayout(): Creating TSubStructure *xPosMin, *xPosMax, *xPosStep, *yPosMin, *yPosMax, *yPosStep -> Settings for X and Y axis scans\n");
    fH2 = new TGCompositeFrame(fG1, 3*subgroup[0]/4, 30, kFixedWidth | kHorizontalFrame);
    xPosMin = new TSubStructure();
    for(int i = 0; i < 6; i++) numform[i] = 0;
-   numform[0] = 9; numform[3] = 2; numform[4] = -100; numform[5] = 215000;
+   numform[0] = 9; numform[3] = 2; numform[4] = -100; numform[5] = 375000; //numform[5] = 215000;       // use commented part if Z is the longer axis and X the shorter
    if(xPosMin->TGLabelNEntry(fH2, 8*subgroup[0]/16, 30, "X (min):", 0, numform, "center"))
       fH2->AddFrame(xPosMin->outsidebox, f0centerX);
    yPosMin = new TSubStructure();
+   numform[5] = 215000;
    if(yPosMin->TGLabelNEntry(fH2, 8*subgroup[0]/16, 30, "Y (min):", 0, numform, "center"))
       fH2->AddFrame(yPosMin->outsidebox, f0centerX);
    fG1->AddFrame(fH2, f1expandXpad);
    fH2 = new TGCompositeFrame(fG1, 3*subgroup[0]/4, 30, kFixedWidth | kHorizontalFrame);
    xPosMax = new TSubStructure();
+   numform[5] = 375000; //numform[5] = 215000;  // use commented part if Z is the longer axis and X the shorter
    if(xPosMax->TGLabelNEntry(fH2, 8*subgroup[0]/16, 30, "X (max):", 0, numform, "center"))
       fH2->AddFrame(xPosMax->outsidebox, f0centerX);
    yPosMax = new TSubStructure();
+   numform[5] = 215000;
    if(yPosMax->TGLabelNEntry(fH2, 8*subgroup[0]/16, 30, "Y (max):", 0, numform, "center"))
       fH2->AddFrame(yPosMax->outsidebox, f0centerX);
    fG1->AddFrame(fH2, f1expandXpad);
    fH2 = new TGCompositeFrame(fG1, 3*subgroup[0]/4, 30, kFixedWidth | kHorizontalFrame);
    fG1->AddFrame(fH2, f1expandXpad);
    fV1->AddFrame(fG1, f1expand2d);
    // Center pane (Table position controls)
    fH1->AddFrame(fV1, f0leftX);
    // Right pane (Incidence angle controls)
    subgroup[0] = 2*(measLayout[2]->GetWidth())/7-14;
    fV1 = new TGCompositeFrame(fH1, subgroup[0], subgroup[1], kFixedWidth | kFixedHeight | kVerticalFrame);
    fG1 = new TGGroupFrame(fV1, "Incidence angle controls");
    numform[0] = 7; numform[1] = 2; numform[3] = 2; numform[4] = -180.; numform[5] = 180.;
    if(rotPos->TGLabelNEntry(fG1, 3*subgroup[0]/4, 30, "Incidence angle:", 0., numform, "center"))
       fG1->AddFrame(rotPos->outsidebox, f1expandXpad);
    // Set, get, home and reset rotation buttons
-   if(DBGSIG > 1) printf("AppLayout(): Creating TSubStructure *rotButtons -> 5 buttons (set rotation, read current rotation, home the motor, reset controller and emergency stop)\n");
+   if(DBGSIG > 1) printf("AppLayout(): Creating TSubStructure *rotButtons -> 4 buttons (set rotation, read current rotation, home the motor, reset controller)\n");
    rotButtons = new TSubStructure();
-   selnames[0] = "Set"; selnames[1] = "Get"; selnames[2] = "Home"; selnames[3] = "Reset"; selnames[4] = "Emergency stop";
+   selnames[0] = "Set"; selnames[1] = "Get"; selnames[2] = "Home"; selnames[3] = "Reset";
-   if(rotButtons->TGMultiButton(fG1, 3*subgroup[0]/4, 30, 5, selnames, "center"))
+   if(rotButtons->TGMultiButton(fG1, 3*subgroup[0]/4, 30, 4, selnames, "center"))
       fG1->AddFrame(rotButtons->outsidebox, f1expandXpad);
+   // Emergency stop rotation buttons
+   if(DBGSIG > 1) printf("AppLayout(): Creating TSubStructure *rotButEmergency -> 1 button (emergency stop)\n");
+   rotButEmergency = new TSubStructure();
+   selnames[0] = "Emergency stop";
+   if(rotButEmergency->TGMultiButton(fG1, 3*subgroup[0]/4, 30, 1, selnames, "center"))
+      fG1->AddFrame(rotButEmergency->outsidebox, f1expandXpad);
    // Rotation scan controls
    if(DBGSIG > 1) printf("AppLayout(): Creating TSubStructure *rotPosMin -> Number entry for starting angle\n");
    rotPosMin = new TSubStructure();
    if(rotPosMin->TGLabelNEntry(fG1, 3*subgroup[0]/4, 30, "Angle (min):", 0.0, numform, "center"))
+   }
    Pixel_t pixel_color;
    gClient->GetColorByName("white", pixel_color);
    posButtons->widgetTB[4]->SetTextColor(pixel_color);
-   rotButtons->widgetTB[4]->SetTextColor(pixel_color);
+   rotButEmergency->widgetTB[0]->SetTextColor(pixel_color);
    gClient->GetColorByName("red", pixel_color);
    posButtons->widgetTB[4]->SetBackgroundColor(pixel_color);
-   rotButtons->widgetTB[4]->SetBackgroundColor(pixel_color);
+   rotButEmergency->widgetTB[0]->SetBackgroundColor(pixel_color);
    // Actions for Main window //TODO
    vOutOpt->widgetChBox[0]->Connect("Clicked()", "TGAppMainFrame", this, "NegativePolarity()");
    vOutButtons->widgetTB[0]->Connect("Clicked()", "TGAppMainFrame", this, "VoltOut(=0)");
    vOutButtons->widgetTB[1]->Connect("Clicked()", "TGAppMainFrame", this, "VoltOut(=1)");
    posButtons->widgetTB[4]->Connect("Clicked()", "TGAppMainFrame", this, "PositionSet(=4)");
    rotButtons->widgetTB[0]->Connect("Clicked()", "TGAppMainFrame", this, "RotationSet(=0)");
    rotButtons->widgetTB[1]->Connect("Clicked()", "TGAppMainFrame", this, "RotationSet(=1)");
    rotButtons->widgetTB[2]->Connect("Clicked()", "TGAppMainFrame", this, "RotationSet(=2)");
    rotButtons->widgetTB[3]->Connect("Clicked()", "TGAppMainFrame", this, "RotationSet(=3)");
-   rotButtons->widgetTB[4]->Connect("Clicked()", "TGAppMainFrame", this, "RotationSet(=4)");
+   rotButEmergency->widgetTB[0]->Connect("Clicked()", "TGAppMainFrame", this, "RotationSet(=4)");
    fileName->widgetTB[0]->Connect("Clicked()", "TGAppMainFrame", this, "SaveFile()");
    measProgress->widgetTB[0]->Connect("Clicked()", "TGAppMainFrame", this, "StartAcq()");
    // TODO - Save file
 // Main window -----------------------------------------------------------------------------
       fH1->AddFrame(dispTemp->outsidebox, f0leftX);
    dispTemp->widgetNE[0]->SetState(kFALSE);
    if(DBGSIG > 1) printf("AppLayout(): Creating TSubStructure *dispAngle -> Number entry for opened histogram (incidence angle)\n");
    dispAngle = new TSubStructure();
    for(int i = 0; i < 6; i++) numform[i] = 0;
    numform[0] = 7; numform[1] = 2;
    if(dispAngle->TGLabelNEntry(fH1, subgroup[0]/4-18, 30, "Angle:", 0.00, numform, "center"))
       fH1->AddFrame(dispAngle->outsidebox, f0leftX);
    dispAngle->widgetNE[0]->SetState(kFALSE);
    fG1->AddFrame(fH1, f0leftXpad);
    histOpt->widgetChBox[0]->Connect("Clicked()", "TGAppMainFrame", this, "HistogramOptions(=0)");
    histOpt->widgetChBox[1]->Connect("Clicked()", "TGAppMainFrame", this, "HistogramOptions(=1)");
    exportHist->widgetTB[0]->Connect("Clicked()", "TGAppMainFrame", this, "UpdateHistogram(=1)");
 // Histogram controls pane -----------------------------------------------------------------
+   // Setting starting settings (when opening program)
+   GetMeasSettings();
+   GetAnalSettings();
+}
 // -------------------------------------------------------------------
 // Closing main window and checking about information ----------------

Subversion Repositories f9daq

(root)/lab/sipmscan/trunk/src/sipmscan.cpp – Rev 172 → 173