WebSVN – f9daq – Diff – //sipmScan/src/sipmBias.c



#  define USE_CAMAC
#  include "camac.h"
#  define NDAC 1 // CAEN C221
#    define ASD8 0 // channels
#    define AMPDISSH 1
#    define SIPM 15
#  define CAEN_V673A   0x22220000 // IJS
//#define CAEN_V673A   0x10110000 // FMF
#  define CAEN_V462    0x100300
#endif
 
#ifdef USE_MIKRO
#  define MIKRO_COM 3
#  define MIKRO_X 1
#  define USE_MIKRO_Y
#  define MIKRO_Y 2
#  define USE_MIKRO_Z
#  define MIKRO_Z 3
#  define STEP_TOLERANCE 1
#endif
 
#define MAXCH 512
#define MAX_THREADS 10
 
#define IWAIT 200
 
#define NCH 64
#define POWERSUPPLY 66 // Power supply voltage for SiPM bias
#define OFFSETX 5600 // position of the lower right corner
#define OFFSETY 5200
 
static int p1h, pID, rID, tfID;
static int ph_tdc, ph_adc;
static int dtdc[NCH][2][MAXCH];
static int something[NCH][2][MAXCH];

        V462_set0(0,1);
#endif
 
  //if (dsave) {
    sprintf(dfile,"%s_file%02d.dat",dfile0,fcount);
        SetCtrlVal(p1h, P1_FCOUNT, fcount);
 
    fp = fopen (dfile, "wb");
    time (&runrec.time);
    status = fwrite (&runrec, 1, runrec.len, fp);
        //}

  while (biasrec.bias <= runrec.biasUp) {
        SetDac(SIPM, biasrec.bias/1000.0 - POWERSUPPLY);
        SetCtrlVal(p1h, P1_SBIAS, biasrec.bias/1000.0);
        status = fwrite(&biasrec, 1, biasrec.len, fp);
        if (print) printf("BIASREC status %d len %d bias %d\n", status, biasrec.len, biasrec.bias);
        wait_loop(10000);
 
  // Set ASD threshold voltage
  thrrec.threshold = (unsigned long) ceil(thresholdLow*1000); // threshold in mV
  while (thrrec.threshold <= thresholdUp*1000) {
    SetDac(ASD8, thrrec.threshold/1000.0);
        SetCtrlVal(p1h, P1_SASD8THR, thrrec.threshold/1000.0);
    status = fwrite(&thrrec, 1, thrrec.len, fp);
    if (print) printf("THRREC status %d len %d threshold %d\n", status, thrrec.len, thrrec.threshold);
        wait_loop(10000);
   
  for (posrec.ix=0; posrec.ix<runrec.nx; posrec.ix++) {
                posrec.xset = runrec.x0 + posrec.ix*runrec.dx;
#ifdef USE_MIKRO
          //printf("MIKRO_MoveTo (1, x);%d\n",posrec.x);
          do {
        MIKRO_MoveTo (MIKRO_X, OFFSETX + posrec.xset);
        MIKRO_GetPosition(MIKRO_X, &mikroX);
                mikroX -= OFFSETX;
      } while (abs(posrec.xset - mikroX) > STEP_TOLERANCE);
          //printf("->MIKRO_MoveTo (1, x);%d\n",posrec.xset);
#endif
          //SetCtrlVal (p1h, P1_X, posrec.xset);
          posrec.xset = mikroX; // set the true value

          for (posrec.iy=0; posrec.iy<runrec.ny; posrec.iy++) {
      posrec.yset = runrec.y0 + posrec.iy*runrec.dy;
#ifdef USE_MIKRO_Y
      //printf("MIKRO_MoveTo (2, y);%d\n",y);
      do {
        MIKRO_MoveTo (MIKRO_Y, OFFSETY + posrec.yset);
        MIKRO_GetPosition(MIKRO_Y, &mikroY);
                mikroY -= OFFSETY;
        } while (abs(posrec.yset - mikroY) > STEP_TOLERANCE);
          //printf("->MIKRO_MoveTo (2, y);%d\n",posrec.yset);
#endif
      //SetCtrlVal (p1h, P1_Y, posrec.yset);
      posrec.yset = mikroY; // set the true value

            if (fmax && (ftell(fp) > fmax)) {
              time (&endrec.time);
                      status = fwrite (&endrec, 1, endrec.len, fp);
              fcount+=1;
                  sprintf(dfile,"%s_file%02d.dat",dfile0,fcount);
                          SetCtrlVal(p1h, P1_FCOUNT, fcount);
                  fclose(fp);
                  fp = fopen (dfile, "wb");
            }
        }
         

          } // x loop
          if (!daq_on) break;
        } // y loop
        if (!daq_on) break;
        thrrec.threshold += thresholdStep*1000;
        wait_loop(10000);
        } // threhsold loop
        if (!daq_on) break;
        biasrec.bias += runrec.biasStep;
        wait_loop(10000);
        } // bias loop
       
        SetDac(SIPM, 0); // safety
       
  //if (dsave) {

int __stdcall WinMain (HINSTANCE hInstance, HINSTANCE hPrevInstance,
                       LPSTR lpszCmdLine, int nCmdShow)
{
  int i,j,status,refon;
  long int xpos, ypos, zpos;
  char dfile[256];
  char message[128];
  FILE *fp;
 
  typedef struct {
  unsigned long id,len;
  unsigned long fver,time;

#endif
 
  if ((p1h = LoadPanel (0, "include/sipmBias_ui.uir", P1)) < 0) return -1;
  DisplayPanel (p1h);
  SetCtrlAttribute (p1h, P1_PLCH, ATTR_MAX_VALUE, NCH-1);
 
  sprintf(message, "%d", OFFSETX);
  SetCtrlVal (p1h, P1_OFFSETX, message);
  sprintf(message, "%d", OFFSETY);
  SetCtrlVal (p1h, P1_OFFSETY, message);
 
  GetCtrlVal(p1h, P1_ADCHLSAVE, &runrec.xy);
  SetCtrlVal(p1h, P1_ADCHL, runrec.xy-2);
 
  QueueUserEvent (1000, p1h, P1_RESET);

Rev 34	Rev 90
Line 32...	Line 32...
32	# define USE_CAMAC	32	# define USE_CAMAC
33	# include "camac.h"	33	# include "camac.h"
34	# define NDAC 1 // CAEN C221	34	# define NDAC 1 // CAEN C221
35	# define ASD8 0 // channels	35	# define ASD8 0 // channels
36	# define AMPDISSH 1	36	# define AMPDISSH 1
37	# define SIPM 2	37	# define SIPM 15
38	# define CAEN_V673A 0x22220000 // IJS	38	# define CAEN_V673A 0x22220000 // IJS
39	//#define CAEN_V673A 0x10110000 // FMF	39	//#define CAEN_V673A 0x10110000 // FMF
40	# define CAEN_V462 0x100300	40	# define CAEN_V462 0x100300
41	#endif	41	#endif
42		42
43	#ifdef USE_MIKRO	43	#ifdef USE_MIKRO
44	# define MIKRO_COM 5	44	# define MIKRO_COM 3
45	# define MIKRO_X 1	45	# define MIKRO_X 1
46	# define USE_MIKRO_Y	46	# define USE_MIKRO_Y
47	# define MIKRO_Y 2	47	# define MIKRO_Y 2
48	# define USE_MIKRO_Z	48	# define USE_MIKRO_Z
49	# define MIKRO_Z 3	49	# define MIKRO_Z 3
50	# define STEP_TOLERANCE 50	50	# define STEP_TOLERANCE 1
51	#endif	51	#endif
52		52
53	#define MAXCH 512	53	#define MAXCH 512
54	#define MAX_THREADS 10	54	#define MAX_THREADS 10
55		55
56	#define IWAIT 200	56	#define IWAIT 200
57		57
58	#define NCH 64	58	#define NCH 64
59	#define POWERSUPPLY 66 // Power supply voltage for SiPM bias	59	#define POWERSUPPLY 66 // Power supply voltage for SiPM bias
-		60	#define OFFSETX 5600 // position of the lower right corner
-		61	#define OFFSETY 5200
60		62
61	static int p1h, pID, rID, tfID;	63	static int p1h, pID, rID, tfID;
62	static int ph_tdc, ph_adc;	64	static int ph_tdc, ph_adc;
63	static int dtdc[NCH][2][MAXCH];	65	static int dtdc[NCH][2][MAXCH];
64	static int something[NCH][2][MAXCH];	66	static int something[NCH][2][MAXCH];
Line 281...	Line 283...
281	V462_set0(0,1);	283	V462_set0(0,1);
282	#endif	284	#endif
283		285
284	//if (dsave) {	286	//if (dsave) {
285	sprintf(dfile,"%s_file%02d.dat",dfile0,fcount);	287	sprintf(dfile,"%s_file%02d.dat",dfile0,fcount);
-		288	SetCtrlVal(p1h, P1_FCOUNT, fcount);
286		289
287	fp = fopen (dfile, "wb");	290	fp = fopen (dfile, "wb");
288	time (&runrec.time);	291	time (&runrec.time);
289	status = fwrite (&runrec, 1, runrec.len, fp);	292	status = fwrite (&runrec, 1, runrec.len, fp);
290	//}	293	//}
Line 299...	Line 302...
299	while (biasrec.bias <= runrec.biasUp) {	302	while (biasrec.bias <= runrec.biasUp) {
300	SetDac(SIPM, biasrec.bias/1000.0 - POWERSUPPLY);	303	SetDac(SIPM, biasrec.bias/1000.0 - POWERSUPPLY);
301	SetCtrlVal(p1h, P1_SBIAS, biasrec.bias/1000.0);	304	SetCtrlVal(p1h, P1_SBIAS, biasrec.bias/1000.0);
302	status = fwrite(&biasrec, 1, biasrec.len, fp);	305	status = fwrite(&biasrec, 1, biasrec.len, fp);
303	if (print) printf("BIASREC status %d len %d bias %d\n", status, biasrec.len, biasrec.bias);	306	if (print) printf("BIASREC status %d len %d bias %d\n", status, biasrec.len, biasrec.bias);
-		307	wait_loop(10000);
304		308
305	// Set ASD threshold voltage	309	// Set ASD threshold voltage
306	thrrec.threshold = (unsigned long) ceil(thresholdLow*1000); // threshold in mV	310	thrrec.threshold = (unsigned long) ceil(thresholdLow*1000); // threshold in mV
307	while (thrrec.threshold <= thresholdUp*1000) {	311	while (thrrec.threshold <= thresholdUp*1000) {
308	SetDac(ASD8, thrrec.threshold/1000.0);	312	SetDac(ASD8, thrrec.threshold/1000.0);
309	SetCtrlVal(p1h, P1_SASD8THR, thrrec.threshold/1000.0);	313	SetCtrlVal(p1h, P1_SASD8THR, thrrec.threshold/1000.0);
310	status = fwrite(&thrrec, 1, thrrec.len, fp);	314	status = fwrite(&thrrec, 1, thrrec.len, fp);
311	if (print) printf("THRREC status %d len %d threshold %d\n", status, thrrec.len, thrrec.threshold);	315	if (print) printf("THRREC status %d len %d threshold %d\n", status, thrrec.len, thrrec.threshold);
-		316	wait_loop(10000);
312		317
313	for (posrec.ix=0; posrec.ix<runrec.nx; posrec.ix++) {	318	for (posrec.ix=0; posrec.ix<runrec.nx; posrec.ix++) {
314	posrec.xset = runrec.x0 + posrec.ix*runrec.dx;	319	posrec.xset = runrec.x0 + posrec.ix*runrec.dx;
315	#ifdef USE_MIKRO	320	#ifdef USE_MIKRO
316	//printf("MIKRO_MoveTo (1, x);%d\n",posrec.x);	321	//printf("MIKRO_MoveTo (1, x);%d\n",posrec.x);
317	do {	322	do {
318	MIKRO_MoveTo (MIKRO_X, posrec.xset);	323	MIKRO_MoveTo (MIKRO_X, OFFSETX + posrec.xset);
319	MIKRO_GetPosition(MIKRO_X, &mikroX);	324	MIKRO_GetPosition(MIKRO_X, &mikroX);
-		325	mikroX -= OFFSETX;
320	} while (abs(posrec.xset - mikroX) > STEP_TOLERANCE);	326	} while (abs(posrec.xset - mikroX) > STEP_TOLERANCE);
321	//printf("->MIKRO_MoveTo (1, x);%d\n",posrec.xset);	327	//printf("->MIKRO_MoveTo (1, x);%d\n",posrec.xset);
322	#endif	328	#endif
323	//SetCtrlVal (p1h, P1_X, posrec.xset);	329	//SetCtrlVal (p1h, P1_X, posrec.xset);
324	posrec.xset = mikroX; // set the true value	330	posrec.xset = mikroX; // set the true value
Line 327...	Line 333...
327	for (posrec.iy=0; posrec.iy<runrec.ny; posrec.iy++) {	333	for (posrec.iy=0; posrec.iy<runrec.ny; posrec.iy++) {
328	posrec.yset = runrec.y0 + posrec.iy*runrec.dy;	334	posrec.yset = runrec.y0 + posrec.iy*runrec.dy;
329	#ifdef USE_MIKRO_Y	335	#ifdef USE_MIKRO_Y
330	//printf("MIKRO_MoveTo (2, y);%d\n",y);	336	//printf("MIKRO_MoveTo (2, y);%d\n",y);
331	do {	337	do {
332	MIKRO_MoveTo (MIKRO_Y, posrec.yset);	338	MIKRO_MoveTo (MIKRO_Y, OFFSETY + posrec.yset);
333	MIKRO_GetPosition(MIKRO_Y, &mikroY);	339	MIKRO_GetPosition(MIKRO_Y, &mikroY);
-		340	mikroY -= OFFSETY;
334	} while (abs(posrec.yset - mikroY) > STEP_TOLERANCE);	341	} while (abs(posrec.yset - mikroY) > STEP_TOLERANCE);
335	//printf("->MIKRO_MoveTo (2, y);%d\n",posrec.yset);	342	//printf("->MIKRO_MoveTo (2, y);%d\n",posrec.yset);
336	#endif	343	#endif
337	//SetCtrlVal (p1h, P1_Y, posrec.yset);	344	//SetCtrlVal (p1h, P1_Y, posrec.yset);
338	posrec.yset = mikroY; // set the true value	345	posrec.yset = mikroY; // set the true value
Line 463...	Line 470...
463	if (fmax && (ftell(fp) > fmax)) {	470	if (fmax && (ftell(fp) > fmax)) {
464	time (&endrec.time);	471	time (&endrec.time);
465	status = fwrite (&endrec, 1, endrec.len, fp);	472	status = fwrite (&endrec, 1, endrec.len, fp);
466	fcount+=1;	473	fcount+=1;
467	sprintf(dfile,"%s_file%02d.dat",dfile0,fcount);	474	sprintf(dfile,"%s_file%02d.dat",dfile0,fcount);
-		475	SetCtrlVal(p1h, P1_FCOUNT, fcount);
468	fclose(fp);	476	fclose(fp);
469	fp = fopen (dfile, "wb");	477	fp = fopen (dfile, "wb");
470	}	478	}
471	}	479	}
472		480
Line 489...	Line 497...
489	} // x loop	497	} // x loop
490	if (!daq_on) break;	498	if (!daq_on) break;
491	} // y loop	499	} // y loop
492	if (!daq_on) break;	500	if (!daq_on) break;
493	thrrec.threshold += thresholdStep*1000;	501	thrrec.threshold += thresholdStep*1000;
-		502	wait_loop(10000);
494	} // threhsold loop	503	} // threhsold loop
495	if (!daq_on) break;	504	if (!daq_on) break;
496	biasrec.bias += runrec.biasStep;	505	biasrec.bias += runrec.biasStep;
-		506	wait_loop(10000);
497	} // bias loop	507	} // bias loop
498		508
499	SetDac(SIPM, 0); // safety	509	SetDac(SIPM, 0); // safety
500		510
501	//if (dsave) {	511	//if (dsave) {
Line 537...	Line 547...
537	int __stdcall WinMain (HINSTANCE hInstance, HINSTANCE hPrevInstance,	547	int __stdcall WinMain (HINSTANCE hInstance, HINSTANCE hPrevInstance,
538	LPSTR lpszCmdLine, int nCmdShow)	548	LPSTR lpszCmdLine, int nCmdShow)
539	{	549	{
540	int i,j,status,refon;	550	int i,j,status,refon;
541	long int xpos, ypos, zpos;	551	long int xpos, ypos, zpos;
542	char dfile[~~300~~];	552	char dfile[256];
-		553	char message[128];
543	FILE *fp;	554	FILE *fp;
544		555
545	typedef struct {	556	typedef struct {
546	unsigned long id,len;	557	unsigned long id,len;
547	unsigned long fver,time;	558	unsigned long fver,time;
Line 576...	Line 587...
576	#endif	587	#endif
577		588
578	if ((p1h = LoadPanel (0, "include/sipmBias_ui.uir", P1)) < 0) return -1;	589	if ((p1h = LoadPanel (0, "include/sipmBias_ui.uir", P1)) < 0) return -1;
579	DisplayPanel (p1h);	590	DisplayPanel (p1h);
580	SetCtrlAttribute (p1h, P1_PLCH, ATTR_MAX_VALUE, NCH-1);	591	SetCtrlAttribute (p1h, P1_PLCH, ATTR_MAX_VALUE, NCH-1);
-		592
-		593	sprintf(message, "%d", OFFSETX);
-		594	SetCtrlVal (p1h, P1_OFFSETX, message);
-		595	sprintf(message, "%d", OFFSETY);
-		596	SetCtrlVal (p1h, P1_OFFSETY, message);
581		597
582	GetCtrlVal(p1h, P1_ADCHLSAVE, &runrec.xy);	598	GetCtrlVal(p1h, P1_ADCHLSAVE, &runrec.xy);
583	SetCtrlVal(p1h, P1_ADCHL, runrec.xy-2);	599	SetCtrlVal(p1h, P1_ADCHL, runrec.xy-2);
584		600
585	QueueUserEvent (1000, p1h, P1_RESET);	601	QueueUserEvent (1000, p1h, P1_RESET);

Subversion Repositories f9daq

(root)//sipmScan/src/sipmBias.c – Rev 34 → 90