| /praktikum/fmf-fft-p5/motor.c |
|---|
| 0,0 → 1,739 |
| #include <cvirte.h> |
| #include <userint.h> |
| #include <utility.h> |
| #include <ansi_c.h> |
| #include <rs232.h> |
| #include <string.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include "motor.h" |
| #include <analysis.h> |
| #include <math.h> |
| //stepping motor busheng --> declaration 1step=1.8degrees |
| //experimantally: full rotation = 3200 steps (on setting 1step/mm ($100)) |
| int pCOM1 = 6; |
| int pCOM2 = 7; |
| int run, graph, f_t, ji, vi, run1; |
| int left_1, right_1; |
| static int panel, tfID, tfID1; |
| static int poolHandle = 0; |
| #define TEXT_LENGTH 2000 |
| #define MAX_THREADS 10 |
| double volt_g[TEXT_LENGTH], volt_g1[TEXT_LENGTH*200]; |
| int bytes_read0; |
| int bytes_read1; |
| char read_data0[TEXT_LENGTH]; |
| char read_data1[TEXT_LENGTH]; |
| void initialize() |
| { |
| // Open grbl serial port //("COM6",115200) |
| OpenComConfig (pCOM1, "COM6", 115200, 0, 8, 1, 512, 512); |
| /* Turn off Hardware handshaking (loopback test will not function with it on) */ |
| SetCTSMode (pCOM1, LWRS_HWHANDSHAKE_OFF); |
| ComWrt (pCOM1, "\r\n\r\n", 5); //Writing on Port |
| Delay(2); //Wait for grbl to initialize |
| int strLen0 = GetInQLen (pCOM1); //Reading from Port |
| bytes_read0 = ComRd (pCOM1, read_data0, strLen0); |
| printf("%s\n", read_data0); |
| //Left in this form - can have more initializing commands if needeed |
| char init[1][10] = {"$RST=$\n"};//, "$100=20\n","$$\n","$100=100\n" |
| char *cmd; |
| for(int i=0; i<1; i++) |
| { |
| cmd = init + i; //Takes init[i] |
| int len = strlen(cmd); |
| ComWrt (pCOM1, cmd, len); |
| printf("%s", cmd); |
| Delay(0.01); //Give it a little time to respond... |
| int strLen1 = GetInQLen (pCOM1); |
| bytes_read1 = ComRd (pCOM1, read_data1, strLen1); |
| printf(" : %s\n", read_data1); |
| //printf("bytes_read = %d\n\n", bytes_read1); |
| } |
| FlushOutQ (pCOM1); |
| } |
| void asking_position() |
| { |
| while (1) |
| { |
| FlushInQ (pCOM1); |
| FlushOutQ (pCOM1); |
| ComWrt (pCOM1, "?\n", 2); //asks grbl his position |
| Delay(0.01); |
| int strLen0 = GetInQLen (pCOM1); |
| bytes_read0 = ComRd (pCOM1, read_data0, strLen0); |
| //printf(" : %s", read_data0); |
| //printf("bytes_read = %d\n\n", bytes_read0); |
| //taking subtring of a string to first appernace of character |
| char *read_data_0 = strtok(read_data0, "\n"); |
| //printf(" : %s\n", read_data_0); |
| //finding substring in string |
| char *substr = strstr(read_data_0,"Idle"); |
| //printf("\n%s\n", substr); |
| if(substr>0) break; |
| if (!run) |
| { |
| ComWrt (pCOM1, "!\n", 2); //stops grbl |
| Delay(0.01); |
| ComWrt (pCOM1, "~\n", 2); //releases grbl |
| Delay(0.01); |
| int strLen = GetInQLen (pCOM1); |
| bytes_read0 = ComRd (pCOM1, read_data0, strLen); |
| //printf(" : %s", read_data0); |
| break; |
| } |
| } |
| } |
| void initialize_voltage() |
| { |
| // Open serial port for photodetector - reading is on chanel A1 |
| OpenComConfig (pCOM2, "COM7", 115200, 0, 8, 1, 512, 512); |
| SetCTSMode (pCOM2, LWRS_HWHANDSHAKE_OFF); |
| Delay(0.5); |
| FlushInQ (pCOM2); |
| FlushOutQ (pCOM2); |
| } |
| int bytes_read2; |
| char read_data2[TEXT_LENGTH]; |
| double read_voltage() |
| { |
| //int strLen2 = GetInQLen (pCOM2); |
| bytes_read2 = ComRdTerm (pCOM2, read_data2, 11, 10); |
| //IMPORTANT: 11 bytes is the size of one line |
| printf("Voltage: \n%s\n", read_data2); |
| //printf("bytes_read = %d\n\n", bytes_read2); |
| //Delay(0.1); |
| double Volt; |
| sscanf(read_data2, "%lf", &Volt); |
| //printf("Volt = %lf\n", Volt); |
| return Volt; |
| } |
| int bytes_read3; |
| char read_data3[TEXT_LENGTH]; |
| void movement(int steps) |
| { |
| //Move on the steps |
| char str[10], move[20] = "$J=X"; |
| sprintf(str,"%d",steps); |
| strcat(move,str); |
| strcat(move,"F600\n"); |
| //Command must look like "X200\n" or "$J=X200F600" |
| int len0 = strlen(move); |
| //printf("len0 is %d ", len0); |
| printf("Moving on point %d\n", steps); |
| ComWrt (pCOM1, move, len0); |
| Delay(0.01); |
| int strLen3 = GetInQLen (pCOM1); |
| bytes_read3 = ComRd (pCOM1, read_data3, strLen3); |
| //printf(" :\n%s", read_data3); |
| //printf("bytes_read = %d\n\n", bytes_read3); |
| FlushInQ (pCOM1); |
| } |
| static int CVICALLBACK daq_run(void *functionData) |
| { |
| int num_points; |
| int waittime; |
| double volt; |
| int j = 0; //for graph |
| GetCtrlVal(panel, p1_NUM_POINTS, &num_points); |
| GetCtrlVal(panel, p1_WAIT_TIME, &waittime); |
| //double wait = waittime/1000.0; //Wait time between each step |
| //printf("wait: %lf", wait); |
| movement(0); |
| Delay(0.1); |
| asking_position(); |
| initialize_voltage(); |
| if (!run) return 0; |
| FlushInQ (pCOM1); |
| FlushOutQ (pCOM1); |
| Delay(0.1); |
| movement(num_points); |
| while (1) // Continious reading |
| { |
| volt = read_voltage(); |
| FlushInQ (pCOM2); |
| SetCtrlVal(panel, p1_VOLTAGE, volt); |
| //writing in tabel for graph |
| volt_g1[j] = volt; |
| if (volt>6) volt_g1[j]=volt_g1[j-1]; |
| if (volt<-0.1) volt_g1[j]=volt_g1[j-1]; |
| j++; |
| if (!run) // Stopping grbl if pressed STOP |
| { |
| ComWrt (pCOM1, "!\n", 2); //stops grbl |
| Delay(0.01); |
| ComWrt (pCOM1, "~\n", 2); //releases grbl |
| Delay(0.01); |
| int strLen = GetInQLen (pCOM1); |
| bytes_read0 = ComRd (pCOM1, read_data0, strLen); |
| //printf(" : %s", read_data0); |
| break; |
| } |
| FlushInQ (pCOM1); |
| FlushOutQ (pCOM1); |
| ComWrt (pCOM1, "?\n", 2); //asks grbl his position |
| Delay(0.01); |
| int strLen5 = GetInQLen (pCOM1); |
| bytes_read0 = ComRd (pCOM1, read_data0, strLen5); |
| char *read_data_0 = strtok(read_data0, "\n"); |
| char *substr2 = strstr(read_data_0,"Idle"); |
| //printf("\n%d\n", substr); |
| if(substr2>0) break; |
| } |
| if (run) |
| { |
| // Choosing 2^n points |
| int j_j = j - 500; //cut off first 300 and last - 200 - points |
| int j_jj = j_j/num_points; |
| //printf("j_j = %d, j_jj = %d\n",j_j,j_jj); |
| //IMPORTANT! On graph must be only num_points of points |
| for (int i=0; i<num_points; i++) |
| { |
| volt_g[i] = volt_g1[300+i*j_jj]; |
| } |
| } |
| // Moving by steps |
| /*for(int i=(-num_points/2); i<(num_points/2); i++) |
| { |
| //printf("i is: %d\n", i); |
| movement(i); |
| asking_position(); |
| Delay(0.01); // Little time has to be in between so that grbl can respond |
| volt = read_voltage(); |
| Delay(wait); |
| FlushInQ (pCOM1); |
| FlushInQ (pCOM2); |
| SetCtrlVal(panel, p1_VOLTAGE, volt); |
| //writing in tabel for graph |
| volt_g[j] = volt; |
| j++; |
| if (!run) break; |
| }*/ |
| if (run) //IMPORTANT!! SAME NUM. of POINTS FOR FOURIER |
| { |
| //for(int i=0;i<j;i++) printf("volt_g[%d] = %lf\n",i,volt_g[i]); |
| if (graph>0) DeleteGraphPlot (panel, p1_VOLTAGE_GRAPH, graph, VAL_DELAYED_DRAW); |
| graph = PlotY (panel, p1_VOLTAGE_GRAPH, &volt_g[0], num_points, VAL_DOUBLE, |
| VAL_CONNECTED_POINTS, VAL_SIMPLE_DOT, VAL_SOLID, 1, VAL_WHITE); |
| ji = num_points; |
| f_t = 1; |
| } |
| FlushInQ (pCOM1); |
| FlushOutQ (pCOM1); |
| FlushInQ (pCOM2); |
| FlushOutQ (pCOM2); |
| run = 0; |
| return 0; |
| } |
| static int CVICALLBACK voltage_run(void *functionData) |
| { |
| int fix_range; |
| double ymin,ymax,xmin,xmax; |
| double voltA,voltB=0; |
| int time = 0; |
| //double volt1[TEXT_LENGTH]; |
| initialize_voltage(); |
| int chart = NewCtrl (panel, CTRL_GRAPH_LS, "RUN VOLTAGE", 100, 15); |
| SetCtrlAttribute(panel, chart, ATTR_HEIGHT, 600); |
| SetCtrlAttribute(panel, chart, ATTR_WIDTH , 1300); |
| while(1) |
| { |
| // Range |
| GetCtrlVal(panel, p1_RANGE, &fix_range); |
| if(fix_range) |
| { |
| GetAxisRange (panel, chart, VAL_MANUAL, &xmin, &xmax, VAL_MANUAL, &ymin, &ymax); |
| if (ymax<=2) SetAxisRange (panel, chart, VAL_NO_CHANGE, 0, 0, VAL_MANUAL, 0, 2); |
| else SetAxisRange (panel, chart, VAL_NO_CHANGE, 0, 0, VAL_MANUAL, 0, 5); |
| } |
| else SetAxisRange (panel, chart, VAL_NO_CHANGE, 0, 0, VAL_AUTOSCALE, 0, 0); |
| //volt1[time] = read_voltage(); |
| voltA = read_voltage(); |
| PlotPoint(panel, chart, time, voltA, VAL_SOLID_SQUARE, VAL_WHITE); |
| if (time>0) PlotLine(panel, chart, time, voltA, time-1, voltB, VAL_WHITE); |
| if (time>50) SetAxisRange (panel, chart, VAL_MANUAL, time-50, time, VAL_NO_CHANGE, 0, 0); |
| SetCtrlVal(panel, p1_VOLTAGE, voltA); |
| Delay(0.05); |
| time++; |
| voltB = voltA; |
| //volt1[time] = voltA; |
| FlushInQ (pCOM2); |
| if (vi == 0) break; |
| } |
| DiscardCtrl (panel, chart); |
| // After some time (~4000 points) it becomes slower in writing out data... |
| //if (graph!=0) DeleteGraphPlot (panel, p1_VOLTAGE_GRAPH, graph, VAL_DELAYED_DRAW); |
| //graph = PlotY (panel, p1_VOLTAGE_GRAPH, &volt1[0], time+1, VAL_DOUBLE, |
| // VAL_CONNECTED_POINTS, VAL_SIMPLE_DOT, VAL_SOLID, 1, VAL_WHITE); |
| return 0; |
| } |
| static int CVICALLBACK free_run(void *functionData) |
| { |
| if (run == 1) return 0; |
| run1 = 1; |
| if (left_1) movement(-10000); |
| if (right_1) movement(10000); |
| left_1 = 0; |
| right_1 = 0; |
| while (1) |
| { |
| if (run1 == 0) |
| { |
| ComWrt (pCOM1, "!\n", 2); //stops grbl |
| Delay(0.01); |
| ComWrt (pCOM1, "~\n", 2); //releases grbl |
| Delay(0.01); |
| int strLen = GetInQLen (pCOM1); |
| bytes_read0 = ComRd (pCOM1, read_data0, strLen); |
| //printf(" : %s", read_data0); |
| printf("Stop run1\n"); |
| break; |
| } |
| } |
| return 0; |
| } |
| int main() |
| { |
| SetStdioPort(HOST_SYSTEM_STDIO); |
| SetStdioWindowOptions(1000000, 0, 0); |
| SetStdioWindowVisibility(1); |
| initialize(); |
| CmtNewThreadPool (MAX_THREADS, &poolHandle); |
| DisplayPanel (panel = LoadPanel (0, "motor.uir", p1)); |
| RunUserInterface (); |
| CmtDiscardThreadPool (poolHandle); |
| return 0; |
| } |
| int CVICALLBACK StartCB (int panel, int control, int event, |
| void *callbackData, int eventData1, int eventData2) |
| { |
| int dummy; |
| switch (event) |
| { |
| case EVENT_COMMIT: |
| if (run == 1) break; |
| run = 1; |
| CmtScheduleThreadPoolFunction (poolHandle, daq_run, (void *)&dummy, &tfID); |
| } |
| return 0; |
| } |
| int CVICALLBACK StopCB (int panel, int control, int event, |
| void *callbackData, int eventData1, int eventData2) |
| { |
| switch (event) |
| { |
| case EVENT_COMMIT: |
| if (run == 0) break; |
| run = 0; |
| CmtWaitForThreadPoolFunctionCompletion (poolHandle, tfID, |
| OPT_TP_PROCESS_EVENTS_WHILE_WAITING); |
| CmtReleaseThreadPoolFunctionID (poolHandle, tfID); |
| printf("Stop\n"); |
| break; |
| } |
| return 0; |
| } |
| int CVICALLBACK ExitCB (int panel, int control, int event, |
| void *callbackData, int eventData1, int eventData2) |
| { |
| switch (event) |
| { |
| case EVENT_COMMIT: |
| QuitUserInterface (0); |
| CloseCom(pCOM1); |
| CloseCom(pCOM2); |
| break; |
| } |
| return 0; |
| } |
| int CVICALLBACK Fourier_TransCB (int panel, int control, int event, |
| void *callbackData, int eventData1, int eventData2) |
| { |
| if (!ji) return 0; |
| const int ii = ji; |
| double fourier_t[ii], fourier_ti[ii]; |
| char window_fun; |
| switch (event) |
| { |
| case EVENT_COMMIT: |
| for(int i=0; i<ii; i++) |
| { |
| fourier_t[i] = volt_g[i]; |
| fourier_ti[i] = 0; |
| } |
| GetCtrlVal(panel, p1_WIN_FUN, &window_fun); |
| //printf("window_fun = %d\n", window_fun); |
| if (window_fun!=0) |
| { |
| //do something with window functions |
| if(window_fun==1) for(int i=0; i<ii; i++) fourier_t[i] = (2*fourier_t[i]); |
| if(window_fun==2) for(int i=0; i<ii; i++) fourier_t[i] = sin(fourier_t[i]); |
| YGraphPopup ("HOW volt_g LOOKS NOW", fourier_t, ii, VAL_DOUBLE); |
| } |
| FFT (fourier_t, fourier_ti, ii); |
| for (int i=0; i<ii; i++) fourier_t[i] = fabs(fourier_t[i]); |
| fourier_t[0]=0; |
| YGraphPopup ("FOURIER", fourier_t, ii/2+1, VAL_DOUBLE); |
| if (f_t == 1) |
| { |
| FILE *fp,*fp1; |
| //file name has to have file extension |
| char fname[50]; |
| GetCtrlVal(panel, p1_F_NAME, fname); |
| fp = fopen(fname, "w"); |
| char fname1[50]; |
| GetCtrlVal(panel, p1_F_NAME1, fname1); |
| fp1 = fopen(fname1, "w"); |
| fprintf(fp, "step\tvolt_g\n"); |
| for(int i=0; i<ii; i++) |
| { |
| fprintf(fp, "%d\t%lf\n", i+1, volt_g[i]); |
| } |
| fprintf(fp1, "step\tfourier_t\n"); |
| for(int i=0; i<ii/2+1; i++) |
| { |
| fprintf(fp1, "%d\t%lf\n", i, fourier_t[i]); //0th component is from DC - background? |
| } |
| fclose(fp); |
| fclose(fp1); |
| printf("Files %s and %s created.\n", fname, fname1); |
| } |
| f_t = 0; //so that we make only one file |
| break; |
| } |
| return 0; |
| } |
| int CVICALLBACK ExamplesCB (int panel, int control, int event, |
| void *callbackData, int eventData1, int eventData2) |
| { |
| const int ki=1024; |
| double ret[ki], ret1[ki]; |
| double val = 3.14159265/180; |
| int x1, x2, a1, a2; |
| switch (event) |
| { |
| case EVENT_COMMIT: |
| GetCtrlVal(panel, p1_FREQ1, &x1); |
| GetCtrlVal(panel, p1_FREQ2, &x2); |
| GetCtrlVal(panel, p1_AMPL1, &a1); |
| GetCtrlVal(panel, p1_AMPL2, &a2); |
| for (int i=0; i<ki; i++) |
| { |
| ret[i] = a1*sin(x1*i*val)+a2*sin(x2*i*val); |
| ret1[i] = 0; |
| } |
| YGraphPopup ("example graph", ret, ki, VAL_DOUBLE); |
| FFT (ret, ret1, ki); |
| for (int i=0; i<ki; i++) ret[i] = fabs(ret[i]); |
| //for (int i=0;i<ki;i++) printf("basic: %lf, fourier: %lf\n", ret1[i], ret[i]); |
| YGraphPopup ("example fourier", ret, ki/2+1, VAL_DOUBLE); |
| break; |
| } |
| return 0; |
| } |
| int CVICALLBACK Only_voltageCB (int panel, int control, int event, |
| void *callbackData, int eventData1, int eventData2) |
| { |
| int dummy, volt_run; |
| switch (event) |
| { |
| case EVENT_COMMIT: |
| GetCtrlVal (panel, p1_VOLT_GRAPH, &volt_run); |
| if(volt_run) |
| { |
| vi = 1; |
| CmtScheduleThreadPoolFunction (poolHandle, voltage_run, (void *)&dummy, &tfID); |
| } |
| else |
| { |
| vi = 0; |
| CmtWaitForThreadPoolFunctionCompletion (poolHandle, tfID, |
| OPT_TP_PROCESS_EVENTS_WHILE_WAITING); |
| CmtReleaseThreadPoolFunctionID (poolHandle, tfID); |
| } |
| break; |
| } |
| return 0; |
| } |
| int CVICALLBACK RangeCB (int panel, int control, int event, |
| void *callbackData, int eventData1, int eventData2) |
| { |
| int fix_range; |
| double ymin,ymax,xmin,xmax; |
| switch (event) |
| { |
| case EVENT_COMMIT: |
| GetCtrlVal(panel, p1_RANGE, &fix_range); |
| if(fix_range) |
| { |
| GetAxisRange (panel, p1_VOLTAGE_GRAPH, VAL_MANUAL, &xmin, &xmax, VAL_MANUAL, &ymin, &ymax); |
| if (ymax<=2) SetAxisRange (panel, p1_VOLTAGE_GRAPH, VAL_NO_CHANGE, 0, 0, VAL_MANUAL, 0, 2); |
| else SetAxisRange (panel, p1_VOLTAGE_GRAPH, VAL_NO_CHANGE, 0, 0, VAL_MANUAL, 0, 5); |
| } |
| else SetAxisRange (panel, p1_VOLTAGE_GRAPH, VAL_NO_CHANGE, 0, 0, VAL_AUTOSCALE, 0, 0); |
| break; |
| } |
| return 0; |
| } |
| int CVICALLBACK FreeMoveCB (int panel, int control, int event, |
| void *callbackData, int eventData1, int eventData2) |
| { |
| int dummy; |
| switch (event) |
| { |
| case EVENT_COMMIT: |
| if (run == 1) break; |
| if (run1 == 1) break; |
| right_1 = 1; |
| CmtScheduleThreadPoolFunction (poolHandle, free_run, (void *)&dummy, &tfID1); |
| break; |
| } |
| return 0; |
| } |
| int CVICALLBACK FreeMove1CB (int panel, int control, int event, |
| void *callbackData, int eventData1, int eventData2) |
| { |
| int dummy; |
| switch (event) |
| { |
| case EVENT_COMMIT: |
| if (run == 1) break; |
| if (run1 == 1) break; |
| left_1 = 1; |
| CmtScheduleThreadPoolFunction (poolHandle, free_run, (void *)&dummy, &tfID1); |
| break; |
| } |
| return 0; |
| } |
| int CVICALLBACK FreeMoveStopCB (int panel, int control, int event, |
| void *callbackData, int eventData1, int eventData2) |
| { |
| switch (event) |
| { |
| case EVENT_COMMIT: |
| if (run == 1) break; |
| if (run1 == 0) break; |
| run1 = 0; |
| CmtWaitForThreadPoolFunctionCompletion (poolHandle, tfID1, |
| OPT_TP_PROCESS_EVENTS_WHILE_WAITING); |
| CmtReleaseThreadPoolFunctionID (poolHandle, tfID1); |
| break; |
| } |
| return 0; |
| } |
| int CVICALLBACK Pos0CB (int panel, int control, int event, |
| void *callbackData, int eventData1, int eventData2) |
| { |
| switch (event) |
| { |
| case EVENT_COMMIT: |
| if (run == 1) break; |
| if (run1 == 1) break; |
| FlushInQ (pCOM1); |
| FlushOutQ (pCOM1); |
| CloseCom(pCOM1); |
| initialize(); |
| break; |
| } |
| return 0; |
| } |
| /praktikum/fmf-fft-p5/motor.cds |
|---|
| 0,0 → 1,59 |
| <distribution version="13.0.2" name="Motor" type="MSI"> |
| <prebuild> |
| <workingdir>workspacedir</workingdir> |
| <actions></actions></prebuild> |
| <postbuild> |
| <workingdir>workspacedir</workingdir> |
| <actions></actions></postbuild> |
| <msi GUID="{442B57EB-65A0-4E76-BBDB-A10A4663CF27}"> |
| <general appName="Motor" outputLocation="c:\home\Fourier\grbl-master\New\cvidistkit.Motor" relOutputLocation="cvidistkit.Motor" outputLocationWithVars="c:\home\Fourier\grbl-master\New\cvidistkit.%name" relOutputLocationWithVars="cvidistkit.%name" upgradeBehavior="1" autoIncrement="true" version="1.0.1"> |
| <arp company="" companyURL="" supportURL="" contact="" phone="" comments=""/> |
| <summary title="" subject="" keyWords="" comments="" author=""/></general> |
| <userinterface language="English" showPaths="true" readMe="" license=""> |
| <dlgstrings welcomeTitle="Motor" welcomeText=""/></userinterface> |
| <dirs appDirID="101"> |
| <installDir name="[Program Files]" dirID="2" parentID="-1" isMSIDir="true" visible="true" unlock="false"/> |
| <installDir name="Motor" dirID="100" parentID="7" isMSIDir="false" visible="true" unlock="false"/> |
| <installDir name="Motor" dirID="101" parentID="2" isMSIDir="false" visible="true" unlock="false"/> |
| <installDir name="[Start>>Programs]" dirID="7" parentID="-1" isMSIDir="true" visible="true" unlock="false"/></dirs> |
| <files> |
| <simpleFile fileID="0" sourcePath="c:\home\Fourier\grbl-master\New\motor.uir" relSourcePath="motor.uir" relSourceBase="0" targetDir="101" readonly="false" hidden="false" system="false" regActiveX="false" runAfterInstallStyle="IMMEDIATELY_RESUME_INSTALL" cmdLineArgs="" runAfterInstall="false" uninstCmdLnArgs="" runUninst="false"/> |
| <simpleFile fileID="1" sourcePath="c:\home\Fourier\grbl-master\New\cvibuild.motor\Release\motor.exe" targetDir="101" readonly="false" hidden="false" system="false" regActiveX="false" runAfterInstallStyle="IMMEDIATELY_RESUME_INSTALL" cmdLineArgs="" runAfterInstall="false" uninstCmdLnArgs="" runUninst="false"/></files> |
| <fileGroups> |
| <projectOutput targetType="0" dirID="101" projectID="0"> |
| <fileID>1</fileID></projectOutput> |
| <projectDependencies dirID="101" projectID="0"/></fileGroups> |
| <shortcuts> |
| <shortcut name="Motor" targetFileID="1" destDirID="100" cmdLineArgs="" description="" runStyle="NORMAL"/></shortcuts> |
| <mergemodules/> |
| <products/> |
| <runtimeEngine installToAppDir="false" activeXsup="true" analysis="true" cvirte="true" dotnetsup="true" instrsup="true" lowlevelsup="true" lvrt="true" netvarsup="true" rtutilsup="true"> |
| <hasSoftDeps/></runtimeEngine><sxsRuntimeEngine> |
| <selected>false</selected> |
| <doNotAutoSelect>false</doNotAutoSelect></sxsRuntimeEngine> |
| <advanced mediaSize="650"> |
| <launchConditions> |
| <condition>MINOS_WINXP_SP0</condition> |
| </launchConditions> |
| <includeConfigProducts>true</includeConfigProducts> |
| <maxImportVisible>silent</maxImportVisible> |
| <maxImportMode>merge</maxImportMode> |
| <custMsgFlag>false</custMsgFlag> |
| <custMsgPath>msgrte.txt</custMsgPath> |
| <signExe>false</signExe> |
| <certificate></certificate> |
| <signTimeURL></signTimeURL> |
| <signDescURL></signDescURL></advanced> |
| <Projects NumProjects="1"> |
| <Project000 ProjectID="0" ProjectAbsolutePath="c:\home\Fourier\grbl-master\New\motor.prj" ProjectRelativePath="motor.prj"/></Projects> |
| <buildData progressBarRate="0.632346622824811"> |
| <progressTimes> |
| <Begin>0.000000000000000</Begin> |
| <ProductsAdded>0.054570000000000</ProductsAdded> |
| <DPConfigured>1.179570000000000</DPConfigured> |
| <DPMergeModulesAdded>3.294570000000001</DPMergeModulesAdded> |
| <DPClosed>11.194570000000001</DPClosed> |
| <DistributionsCopied>16.394801000000001</DistributionsCopied> |
| <End>158.141115000000010</End></progressTimes></buildData> |
| </msi> |
| </distribution> |
| /praktikum/fmf-fft-p5/motor.cws |
|---|
| 0,0 → 1,170 |
| [Workspace Header] |
| Version = 1302 |
| Pathname = "/c/home/Fourier/grbl-master/praktikum_fft/motor.cws" |
| CVI Dir = "/c/program files (x86)/national instruments/cvi2013" |
| CVI Shared Dir = "/C/Program Files (x86)/National Instruments/Shared/CVI" |
| CVI Pub Local Dir = "/C/ProgramData/National Instruments/CVI2013" |
| CVI Pub Global Dir = "/C/ProgramData/National Instruments/CVI" |
| IVI Standard Root Dir = "/C/Program Files (x86)/IVI Foundation/IVI" |
| IVI Standard Root 64-bit Dir = "/C/Program Files/IVI Foundation/IVI" |
| VXIplug&play Framework Dir = "/C/Program Files (x86)/IVI Foundation/VISA/winnt" |
| VXIplug&play Framework 64-bit Dir = "/C/Program Files/IVI Foundation/VISA/win64" |
| Number of Projects = 1 |
| Active Project = 1 |
| Project 0001 = "motor.prj" |
| Drag Bar Left = 320 |
| Window Top = 75 |
| Window Left = 601 |
| Window Bottom = 881 |
| Window Right = 1849 |
| Maximized = True |
| Maximized Children = True |
| Max32 Number Of Errors = 20 |
| Track Include File Dependencies = True |
| Prompt For Missing Includes = True |
| Stop On First Error File = False |
| Bring Up Err Win At Start = True |
| Bring Up Err Win For Errors = False |
| Save Changes Before Running = "Always" |
| Save Changes Before Compiling = "Always" |
| Hide Windows = False |
| Break At First Statement = False |
| Sort Type = "File Name" |
| Number of Opened Files = 3 |
| Window Confinement Region Enabled = True |
| MainColumnWidth = 303 |
| FileDateColumnWidth = 70 |
| FileSizeColumnWidth = 70 |
| [Project Header 0001] |
| Version = 1302 |
| Don't Update DistKit = False |
| Platform Code = 4 |
| Build Configuration = "Debug" |
| Warn User If Debugging Release = 1 |
| Batch Build Release = False |
| Batch Build Debug = False |
| [File 0001] |
| Path = "/c/home/Fourier/grbl-master/praktikum_fft/motor.c" |
| File Type = "CSource" |
| Disk Date = 3677835890 |
| In Projects = "1," |
| Window Top = 31 |
| Window Z-Order = 1 |
| Source Window State = "1,575,575,575,33,37,37,0,0,173,0,583,0,0,0,47,675,0,579,45,400,600,1,0," |
| [File 0002] |
| Path = "/c/home/Fourier/grbl-master/praktikum_fft/motor.uir" |
| File Type = "User Interface Resource" |
| Disk Date = 3677835891 |
| In Projects = "1," |
| Window Top = 126 |
| Window Left = 58 |
| Window Height = 363 |
| Window Width = 768 |
| Window Z-Order = 2 |
| [File 0003] |
| Path = "/c/home/Fourier/grbl-master/praktikum_fft/motor.h" |
| File Type = "Include" |
| Disk Date = 3677835891 |
| In Projects = "" |
| Window Top = 33 |
| Window Left = 10 |
| Window Z-Order = 3 |
| Source Window State = "1,33,33,33,9,22,22,0,3,80,0,0,0,0,0,21,23,0,33,9,363,768,1,0," |
| [Tab Order] |
| Tab 0001 = "/c/home/Fourier/grbl-master/praktikum_fft/motor.c" |
| Tab 0002 = "/c/home/Fourier/grbl-master/praktikum_fft/motor.uir" |
| Tab 0003 = "/c/home/Fourier/grbl-master/praktikum_fft/motor.h" |
| [Default Build Config 0001 Debug] |
| Generate Browse Info = True |
| Enable Uninitialized Locals Runtime Warning = True |
| Batch Build = False |
| Profile = "Disabled" |
| Debugging Level = "Standard" |
| Execution Trace = "Disabled" |
| Command Line Args = "" |
| Working Directory = "" |
| Environment Options = "" |
| External Process Path = "" |
| [Default Build Config 0001 Release] |
| Generate Browse Info = True |
| Enable Uninitialized Locals Runtime Warning = True |
| Batch Build = False |
| Profile = "Disabled" |
| Debugging Level = "Standard" |
| Execution Trace = "Disabled" |
| Command Line Args = "" |
| Working Directory = "" |
| Environment Options = "" |
| External Process Path = "" |
| [Default Build Config 0001 Debug64] |
| Generate Browse Info = True |
| Enable Uninitialized Locals Runtime Warning = True |
| Batch Build = False |
| Profile = "Disabled" |
| Debugging Level = "Standard" |
| Execution Trace = "Disabled" |
| Command Line Args = "" |
| Working Directory = "" |
| Environment Options = "" |
| External Process Path = "" |
| [Default Build Config 0001 Release64] |
| Generate Browse Info = True |
| Enable Uninitialized Locals Runtime Warning = True |
| Batch Build = False |
| Profile = "Disabled" |
| Debugging Level = "Standard" |
| Execution Trace = "Disabled" |
| Command Line Args = "" |
| Working Directory = "" |
| Environment Options = "" |
| External Process Path = "" |
| [Build Dependencies 0001] |
| Number of Dependencies = 0 |
| [Build Options 0001] |
| Generate Browse Info = True |
| Enable Uninitialized Locals Runtime Warning = True |
| Execution Trace = "Disabled" |
| Profile = "Disabled" |
| Debugging Level = "Standard" |
| Break On Library Errors = True |
| Break On First Chance Exceptions = False |
| [Execution Target 0001] |
| Execution Target Address = "Local desktop computer" |
| Execution Target Port = 0 |
| Execution Target Type = 0 |
| [SCC Options 0001] |
| Use global settings = True |
| SCC Provider = "" |
| SCC Project = "" |
| Local Path = "" |
| Auxiliary Path = "" |
| Perform Same Action For .h File As For .uir File = "Ask" |
| Perform Same Action For .cds File As For .prj File = "Ask" |
| Username = "" |
| Comment = "" |
| Use Default Username = False |
| Use Default Comment = False |
| Suppress CVI Error Messages = False |
| Always show confirmation dialog = True |
| [DLL Debugging Support 0001] |
| External Process Path = "" |
| [Command Line Args 0001] |
| Command Line Args = "" |
| Working Directory = "" |
| Environment Options = "" |
| /praktikum/fmf-fft-p5/motor.h |
|---|
| 0,0 → 1,68 |
| /**************************************************************************/ |
| /* LabWindows/CVI User Interface Resource (UIR) Include File */ |
| /* */ |
| /* WARNING: Do not add to, delete from, or otherwise modify the contents */ |
| /* of this include file. */ |
| /**************************************************************************/ |
| #include <userint.h> |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| /* Panels and Controls: */ |
| #define p1 1 |
| #define p1_LEFT_1 2 /* control type: command, callback function: FreeMove1CB */ |
| #define p1_RIGHT_1 3 /* control type: command, callback function: FreeMoveCB */ |
| #define p1_STOP_1 4 /* control type: command, callback function: FreeMoveStopCB */ |
| #define p1_EXIT 5 /* control type: command, callback function: ExitCB */ |
| #define p1_STOP 6 /* control type: command, callback function: StopCB */ |
| #define p1_FOURIER 7 /* control type: command, callback function: Fourier_TransCB */ |
| #define p1_START 8 /* control type: command, callback function: StartCB */ |
| #define p1_VOLTAGE 9 /* control type: numeric, callback function: (none) */ |
| #define p1_WAIT_TIME 10 /* control type: numeric, callback function: (none) */ |
| #define p1_VOLTAGE_GRAPH 11 /* control type: graph, callback function: (none) */ |
| #define p1_NUM_POINTS 12 /* control type: ring, callback function: (none) */ |
| #define p1_F_NAME1 13 /* control type: string, callback function: (none) */ |
| #define p1_F_NAME 14 /* control type: string, callback function: (none) */ |
| #define p1_WIN_FUN 15 /* control type: ring, callback function: (none) */ |
| #define p1_EXAMPLES 16 /* control type: command, callback function: ExamplesCB */ |
| #define p1_FREQ2 17 /* control type: numeric, callback function: (none) */ |
| #define p1_AMPL2 18 /* control type: numeric, callback function: (none) */ |
| #define p1_AMPL1 19 /* control type: numeric, callback function: (none) */ |
| #define p1_FREQ1 20 /* control type: numeric, callback function: (none) */ |
| #define p1_VOLT_GRAPH 21 /* control type: textButton, callback function: Only_voltageCB */ |
| #define p1_RANGE 22 /* control type: radioButton, callback function: RangeCB */ |
| #define p1_POS0 23 /* control type: command, callback function: Pos0CB */ |
| /* Control Arrays: */ |
| /* (no control arrays in the resource file) */ |
| /* Menu Bars, Menus, and Menu Items: */ |
| /* (no menu bars in the resource file) */ |
| /* Callback Prototypes: */ |
| int CVICALLBACK ExamplesCB(int panel, int control, int event, void *callbackData, int eventData1, int eventData2); |
| int CVICALLBACK ExitCB(int panel, int control, int event, void *callbackData, int eventData1, int eventData2); |
| int CVICALLBACK Fourier_TransCB(int panel, int control, int event, void *callbackData, int eventData1, int eventData2); |
| int CVICALLBACK FreeMove1CB(int panel, int control, int event, void *callbackData, int eventData1, int eventData2); |
| int CVICALLBACK FreeMoveCB(int panel, int control, int event, void *callbackData, int eventData1, int eventData2); |
| int CVICALLBACK FreeMoveStopCB(int panel, int control, int event, void *callbackData, int eventData1, int eventData2); |
| int CVICALLBACK Only_voltageCB(int panel, int control, int event, void *callbackData, int eventData1, int eventData2); |
| int CVICALLBACK Pos0CB(int panel, int control, int event, void *callbackData, int eventData1, int eventData2); |
| int CVICALLBACK RangeCB(int panel, int control, int event, void *callbackData, int eventData1, int eventData2); |
| int CVICALLBACK StartCB(int panel, int control, int event, void *callbackData, int eventData1, int eventData2); |
| int CVICALLBACK StopCB(int panel, int control, int event, void *callbackData, int eventData1, int eventData2); |
| #ifdef __cplusplus |
| } |
| #endif |
| /praktikum/fmf-fft-p5/motor.prj |
|---|
| 0,0 → 1,419 |
| [Project Header] |
| Version = 1302 |
| Pathname = "/c/home/Fourier/grbl-master/New/motor.prj" |
| CVI Dir = "/c/program files (x86)/national instruments/cvi2013" |
| CVI Shared Dir = "/C/Program Files (x86)/National Instruments/Shared/CVI" |
| CVI Pub Local Dir = "/C/ProgramData/National Instruments/CVI2013" |
| CVI Pub Global Dir = "/C/ProgramData/National Instruments/CVI" |
| IVI Standard Root Dir = "/C/Program Files (x86)/IVI Foundation/IVI" |
| VXIplug&play Framework Dir = "/C/Program Files (x86)/IVI Foundation/VISA/winnt" |
| IVI Standard Root 64-bit Dir = "/C/Program Files/IVI Foundation/IVI" |
| VXIplug&play Framework 64-bit Dir = "/C/Program Files/IVI Foundation/VISA/win64" |
| Number of Files = 2 |
| Target Type = "Executable" |
| Flags = 2064 |
| Copied From Locked InstrDrv Directory = False |
| Copied from VXIPNP Directory = False |
| Locked InstrDrv Name = "" |
| Don't Display Deploy InstrDrv Dialog = False |
| [Folders] |
| Include Files Folder Not Added Yet = True |
| Instrument Files Folder Not Added Yet = True |
| Library Files Folder Not Added Yet = True |
| Folder 0 = "Source Files" |
| FolderEx 0 = "Source Files" |
| Folder 1 = "User Interface Files" |
| FolderEx 1 = "User Interface Files" |
| [File 0001] |
| File Type = "CSource" |
| Res Id = 1 |
| Path Is Rel = True |
| Path Rel To = "Project" |
| Path Rel Path = "motor.c" |
| Path = "/c/home/Fourier/grbl-master/New/motor.c" |
| Exclude = False |
| Compile Into Object File = False |
| Project Flags = 0 |
| Folder = "Source Files" |
| Folder Id = 0 |
| [File 0002] |
| File Type = "User Interface Resource" |
| Res Id = 2 |
| Path Is Rel = True |
| Path Rel To = "Project" |
| Path Rel Path = "motor.uir" |
| Path = "/c/home/Fourier/grbl-master/New/motor.uir" |
| Exclude = False |
| Project Flags = 0 |
| Folder = "User Interface Files" |
| Folder Id = 1 |
| [Custom Build Configs] |
| Num Custom Build Configs = 0 |
| [Default Build Config Debug] |
| Config Name = "Debug" |
| Is 64-Bit = False |
| Is Release = False |
| Default Calling Convention = "cdecl" |
| Optimization Level = "Optimize for speed (level 2)" |
| Require Prototypes = True |
| Show Warning IDs in Build Output = False |
| Selected Warning Level = "Common" |
| Warning List None = "" |
| Warning List Common = "" |
| Warning List Extended = "" |
| Warning List All = "" |
| Warning Mode = 0 |
| Enable Unreferenced Identifiers Warning = True |
| Enable Pointer Mismatch Warning = True |
| Enable Unreachable Code Warning = True |
| Enable Assignment In Conditional Warning = True |
| Uninitialized Locals Compile Warning = "Aggressive" |
| Require Return Values = True |
| Enable C99 Extensions = True |
| Enable OpenMP Extensions = False |
| Stack Size = 250000 |
| Stack Reserve = 1048576 |
| Stack Commit = 4096 |
| Image Base Address = 4194304 |
| Image Base Address x64 = 4194304 |
| Compiler Defines = "/DWIN32_LEAN_AND_MEAN" |
| Sign = False |
| Sign Store = "" |
| Sign Certificate = "" |
| Sign Timestamp URL = "" |
| Sign URL = "" |
| Manifest Embed = False |
| Icon File Is Rel = False |
| Icon File = "" |
| Application Title = "" |
| Use IVI Subdirectories for Import Libraries = False |
| Use VXIPNP Subdirectories for Import Libraries = False |
| Use Dflt Import Lib Base Name = True |
| Where to Copy DLL = "Do not copy" |
| Custom Directory to Copy DLL Is Rel = False |
| Custom Directory to Copy DLL = "" |
| Generate Source Documentation = "None" |
| Runtime Support = "Full Runtime Support" |
| Runtime Binding = "Shared" |
| Embed Project .UIRs = False |
| Generate Map File = False |
| Embed Timestamp = True |
| Create Console Application = False |
| Using LoadExternalModule = False |
| DLL Exports = "Include File Symbols" |
| Register ActiveX Server = False |
| Numeric File Version = "1,0,0,0" |
| Numeric Prod Version = "1,0,0,0" |
| Comments = "" |
| Comments Ex = "" |
| Company Name = "" |
| Company Name Ex = "%company" |
| File Description = "motor (Debug x86)" |
| File Description Ex = "%application (%rel_dbg %arch)" |
| File Version = "1.0" |
| File Version Ex = "%f1.%f2" |
| Internal Name = "motor" |
| Internal Name Ex = "%basename" |
| Legal Copyright = "Copyright © 2020" |
| Legal Copyright Ex = "Copyright © %company %Y" |
| Legal Trademarks = "" |
| Legal Trademarks Ex = "" |
| Original Filename = "motor.exe" |
| Original Filename Ex = "%filename" |
| Private Build = "" |
| Private Build Ex = "" |
| Product Name = " motor" |
| Product Name Ex = "%company %application" |
| Product Version = "1.0" |
| Product Version Ex = "%p1.%p2" |
| Special Build = "" |
| Special Build Ex = "" |
| Add Type Lib To DLL = False |
| Include Type Lib Help Links = False |
| TLB Help Style = "HLP" |
| Type Lib FP File Is Rel = False |
| Type Lib FP File = "" |
| [Default Build Config Release] |
| Config Name = "Release" |
| Is 64-Bit = False |
| Is Release = True |
| Default Calling Convention = "cdecl" |
| Optimization Level = "Optimize for speed (level 2)" |
| Require Prototypes = True |
| Show Warning IDs in Build Output = False |
| Selected Warning Level = "Common" |
| Warning List None = "" |
| Warning List Common = "" |
| Warning List Extended = "" |
| Warning List All = "" |
| Warning Mode = 0 |
| Enable Unreferenced Identifiers Warning = True |
| Enable Pointer Mismatch Warning = True |
| Enable Unreachable Code Warning = True |
| Enable Assignment In Conditional Warning = True |
| Uninitialized Locals Compile Warning = "Aggressive" |
| Require Return Values = True |
| Enable C99 Extensions = True |
| Enable OpenMP Extensions = False |
| Stack Size = 250000 |
| Stack Reserve = 1048576 |
| Stack Commit = 4096 |
| Image Base Address = 4194304 |
| Image Base Address x64 = 4194304 |
| Compiler Defines = "/DWIN32_LEAN_AND_MEAN" |
| Sign = False |
| Sign Store = "" |
| Sign Certificate = "" |
| Sign Timestamp URL = "" |
| Sign URL = "" |
| Manifest Embed = False |
| Icon File Is Rel = False |
| Icon File = "" |
| Application Title = "" |
| Use IVI Subdirectories for Import Libraries = False |
| Use VXIPNP Subdirectories for Import Libraries = False |
| Use Dflt Import Lib Base Name = True |
| Where to Copy DLL = "Do not copy" |
| Custom Directory to Copy DLL Is Rel = False |
| Custom Directory to Copy DLL = "" |
| Generate Source Documentation = "None" |
| Runtime Support = "Full Runtime Support" |
| Runtime Binding = "Shared" |
| Embed Project .UIRs = False |
| Generate Map File = False |
| Embed Timestamp = True |
| Create Console Application = False |
| Using LoadExternalModule = False |
| DLL Exports = "Include File Symbols" |
| Register ActiveX Server = False |
| Add Type Lib To DLL = False |
| Include Type Lib Help Links = False |
| TLB Help Style = "HLP" |
| Type Lib FP File Is Rel = False |
| Type Lib FP File = "" |
| [Default Build Config Debug64] |
| Config Name = "Debug64" |
| Is 64-Bit = True |
| Is Release = False |
| Default Calling Convention = "cdecl" |
| Optimization Level = "Optimize for speed (level 2)" |
| Require Prototypes = True |
| Show Warning IDs in Build Output = False |
| Selected Warning Level = "Common" |
| Warning List None = "" |
| Warning List Common = "" |
| Warning List Extended = "" |
| Warning List All = "" |
| Warning Mode = 0 |
| Enable Unreferenced Identifiers Warning = True |
| Enable Pointer Mismatch Warning = True |
| Enable Unreachable Code Warning = True |
| Enable Assignment In Conditional Warning = True |
| Uninitialized Locals Compile Warning = "Aggressive" |
| Require Return Values = True |
| Enable C99 Extensions = True |
| Enable OpenMP Extensions = False |
| Stack Size = 250000 |
| Stack Reserve = 1048576 |
| Stack Commit = 4096 |
| Image Base Address = 4194304 |
| Image Base Address x64 = 4194304 |
| Compiler Defines = "/DWIN32_LEAN_AND_MEAN" |
| Sign = False |
| Sign Store = "" |
| Sign Certificate = "" |
| Sign Timestamp URL = "" |
| Sign URL = "" |
| Manifest Embed = False |
| Icon File Is Rel = False |
| Icon File = "" |
| Application Title = "" |
| Use IVI Subdirectories for Import Libraries = False |
| Use VXIPNP Subdirectories for Import Libraries = False |
| Use Dflt Import Lib Base Name = True |
| Where to Copy DLL = "Do not copy" |
| Custom Directory to Copy DLL Is Rel = False |
| Custom Directory to Copy DLL = "" |
| Generate Source Documentation = "None" |
| Runtime Support = "Full Runtime Support" |
| Runtime Binding = "Shared" |
| Embed Project .UIRs = False |
| Generate Map File = False |
| Embed Timestamp = True |
| Create Console Application = False |
| Using LoadExternalModule = False |
| DLL Exports = "Include File Symbols" |
| Register ActiveX Server = False |
| Add Type Lib To DLL = False |
| Include Type Lib Help Links = False |
| TLB Help Style = "HLP" |
| Type Lib FP File Is Rel = False |
| Type Lib FP File = "" |
| [Default Build Config Release64] |
| Config Name = "Release64" |
| Is 64-Bit = True |
| Is Release = True |
| Default Calling Convention = "cdecl" |
| Optimization Level = "Optimize for speed (level 2)" |
| Require Prototypes = True |
| Show Warning IDs in Build Output = False |
| Selected Warning Level = "Common" |
| Warning List None = "" |
| Warning List Common = "" |
| Warning List Extended = "" |
| Warning List All = "" |
| Warning Mode = 0 |
| Enable Unreferenced Identifiers Warning = True |
| Enable Pointer Mismatch Warning = True |
| Enable Unreachable Code Warning = True |
| Enable Assignment In Conditional Warning = True |
| Uninitialized Locals Compile Warning = "Aggressive" |
| Require Return Values = True |
| Enable C99 Extensions = True |
| Enable OpenMP Extensions = False |
| Stack Size = 250000 |
| Stack Reserve = 1048576 |
| Stack Commit = 4096 |
| Image Base Address = 4194304 |
| Image Base Address x64 = 4194304 |
| Compiler Defines = "/DWIN32_LEAN_AND_MEAN" |
| Sign = False |
| Sign Store = "" |
| Sign Certificate = "" |
| Sign Timestamp URL = "" |
| Sign URL = "" |
| Manifest Embed = False |
| Icon File Is Rel = False |
| Icon File = "" |
| Application Title = "" |
| Use IVI Subdirectories for Import Libraries = False |
| Use VXIPNP Subdirectories for Import Libraries = False |
| Use Dflt Import Lib Base Name = True |
| Where to Copy DLL = "Do not copy" |
| Custom Directory to Copy DLL Is Rel = False |
| Custom Directory to Copy DLL = "" |
| Generate Source Documentation = "None" |
| Runtime Support = "Full Runtime Support" |
| Runtime Binding = "Shared" |
| Embed Project .UIRs = False |
| Generate Map File = False |
| Embed Timestamp = True |
| Create Console Application = False |
| Using LoadExternalModule = False |
| DLL Exports = "Include File Symbols" |
| Register ActiveX Server = False |
| Add Type Lib To DLL = False |
| Include Type Lib Help Links = False |
| TLB Help Style = "HLP" |
| Type Lib FP File Is Rel = False |
| Type Lib FP File = "" |
| [Compiler Options] |
| Default Calling Convention = "cdecl" |
| Require Prototypes = True |
| Require Return Values = True |
| Enable Pointer Mismatch Warning = True |
| Enable Unreachable Code Warning = True |
| Enable Unreferenced Identifiers Warning = True |
| Enable Assignment In Conditional Warning = True |
| O Option Compatible With 5.0 = False |
| Enable C99 Extensions = True |
| Uninitialized Locals Compile Warning = "Aggressive" |
| Precompile Prefix Header = False |
| Prefix Header File = "" |
| [Run Options] |
| Stack Size = 250000 |
| Stack Commit = 4096 |
| Image Base Address = 4194304 |
| Image Base Address x64 = 4194304 |
| [Compiler Defines] |
| Compiler Defines = "/DWIN32_LEAN_AND_MEAN" |
| [Create Executable] |
| Executable File_Debug Is Rel = True |
| Executable File_Debug Rel To = "Project" |
| Executable File_Debug Rel Path = "motor.exe" |
| Executable File_Debug = "/c/home/Fourier/grbl-master/New/motor.exe" |
| Executable File_Release Is Rel = True |
| Executable File_Release Rel To = "Project" |
| Executable File_Release Rel Path = "motor.exe" |
| Executable File_Release = "/c/home/Fourier/grbl-master/New/motor.exe" |
| Executable File_Debug64 Is Rel = True |
| Executable File_Debug64 Rel To = "Project" |
| Executable File_Debug64 Rel Path = "motor.exe" |
| Executable File_Debug64 = "/c/home/Fourier/grbl-master/New/motor.exe" |
| Executable File_Release64 Is Rel = True |
| Executable File_Release64 Rel To = "Project" |
| Executable File_Release64 Rel Path = "motor.exe" |
| Executable File_Release64 = "/c/home/Fourier/grbl-master/New/motor.exe" |
| Icon File Is Rel = False |
| Icon File = "" |
| Application Title = "" |
| DLL Exports = "Include File Symbols" |
| Use IVI Subdirectories for Import Libraries = False |
| Use VXIPNP Subdirectories for Import Libraries = False |
| Use Dflt Import Lib Base Name = True |
| Where to Copy DLL = "Do not copy" |
| Custom Directory to Copy DLL Is Rel = False |
| Custom Directory to Copy DLL = "" |
| Generate Source Documentation = "None" |
| Add Type Lib To DLL = False |
| Include Type Lib Help Links = False |
| TLB Help Style = "HLP" |
| Type Lib FP File Is Rel = False |
| Type Lib FP File = "" |
| Type Lib Guid = "" |
| Runtime Support = "Full Runtime Support" |
| Instrument Driver Support Only = False |
| Embed Project .UIRs = False |
| Generate Map File = False |
| [External Compiler Support] |
| UIR Callbacks File Option = 0 |
| Using LoadExternalModule = False |
| Create Project Symbols File = True |
| UIR Callbacks Obj File Is Rel = False |
| UIR Callbacks Obj File = "" |
| Project Symbols H File Is Rel = False |
| Project Symbols H File = "" |
| Project Symbols Obj File Is Rel = False |
| Project Symbols Obj File = "" |
| [ActiveX Server Options] |
| Specification File Is Rel = False |
| Specification File = "" |
| Source File Is Rel = False |
| Source File = "" |
| Include File Is Rel = False |
| Include File = "" |
| IDL File Is Rel = False |
| IDL File = "" |
| Register ActiveX Server = False |
| [Signing Info] |
| Sign = False |
| Sign Debug Build = False |
| Store = "" |
| Certificate = "" |
| Timestamp URL = "" |
| URL = "" |
| [Manifest Info] |
| Embed = False |
| [tpcSection] |
| tpcEnabled = 0 |
| tpcOverrideEnvironment = 0 |
| tpcEnabled x64 = 0 |
| tpcOverrideEnvironment x64 = 0 |
| /praktikum/fmf-fft-p5/motor.uir |
|---|
| Cannot display: file marked as a binary type. |
| svn:mime-type = application/octet-stream |
| Property changes: |
| Added: svn:mime-type |
| ## -0,0 +1 ## |
| +application/octet-stream |
| \ No newline at end of property |