Subversion Repositories f9daq

Compare Revisions

Ignore whitespace Rev 111 → Rev 112

/praktikum/petdaqfmf/CAENV965.c
0,0 → 1,107
#include <stdlib.h>
#include <stdio.h>
#include "CAENV965.h"
#include "CAENV965_DEF.h"
#include "vme.h"
 
static unsigned long ModuleAddress[10];
 
int _VI_FUNC V965_map (int ModuleNumber, unsigned long ModuleOffset, int print)
{
int i;
unsigned short geo, fw, ah, al;
if (print) {
printf("CAEN V965_map \n");
}
ModuleAddress[ModuleNumber] = ModuleOffset;
VME_A24D16_R(ModuleAddress[ModuleNumber] + CAENV965_FW, &fw);
geo = 0;
VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_CRN, &geo);
for (i=0;i<32;i++)
VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_THM + 2*i, &geo);
geo = ModuleNumber+1;
VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_GEO, &geo);
geo = 0;
VME_A24D16_R(ModuleAddress[ModuleNumber] + CAENV965_GEO, &geo);
VME_A24D16_R(ModuleAddress[ModuleNumber] + CAENV965_ADH, &ah);
VME_A24D16_R(ModuleAddress[ModuleNumber] + CAENV965_ADL, &al);
if (print) {
printf("CAEN V965 offset = 0x%08x\n", ModuleOffset);
printf(" V965_map firmware = %d.%d\n", (fw>>8)&0xff, fw&0xff);
printf(" V965_map geo = %d\n", geo&0x1f );
printf(" V965_map addr = 0x%04X0000\n", (ah<<8)|(al&0xff));
}
return 0;
}
 
 
int _VI_FUNC V965_init (int ModuleNumber, unsigned short ped)
{
unsigned short dum16;
dum16= 0x80;
VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_BS1, &dum16);
VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_BC1, &dum16);
dum16= ped;
VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_PED, &dum16);
dum16= 0x5000;
VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_BS2, &dum16);
dum16= 0x4;
VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_BS2, &dum16);
VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_BC2, &dum16);
VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_ECR, &dum16);
printf ( " V965_init Module %d initialized!\n", ModuleNumber ) ;
return 0;
}
 
int _VI_FUNC V965_clear (int ModuleNumber)
{
 
unsigned short dum16;
dum16= 0x4;
VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_BS2, &dum16);
VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_BC2, &dum16);
printf("V965_clear\n");
return 0;
}
 
int _VI_FUNC V965_status (int ModuleNumber)
{
unsigned short dum16;
 
VME_A24D16_R(ModuleAddress[ModuleNumber] + CAENV965_SR1, &dum16);
//printf("*%d\n",dum16);
return (int)dum16;
}
 
int _VI_FUNC V965_status2 (int ModuleNumber)
{
 
unsigned short dum16;
 
VME_A24D16_R(ModuleAddress[ModuleNumber] + CAENV965_SR2, &dum16);
return (int)dum16;
}
 
int _VI_FUNC V965_read (int ModuleNumber, unsigned long whereto[],int len)
{
int status, ndata, i;
ndata = 0;
do {
if (ndata>=len) {
printf("ERROR V965_read: Increase storage size: ndata=%d\n",ndata);
break;
}
VME_A24D32_R(ModuleAddress[ModuleNumber] + CAENV965_OB, &whereto[ndata]);
i=(whereto[ndata]>>25)&0x3;
if (i<3) ndata++;
} while (i<2);
return ndata;
}
/praktikum/petdaqfmf/libxxusb.cpp
0,0 → 1,1659
 
// libxxusb.cpp : Defines the entry point for the DLL application.
//
 
 
 
#include <string.h>
#include <malloc.h>
#include "usb.h"
#include "libxxusb.h"
#include <time.h>
#include "stdio.h"
 
 
 
// 03/09/06 Release 3.00 changes
// 07/28/06 correction CAMAC write for F to be in range 16...23
// 10/09/06 correction CAMAC read for F to be in range <16 OR >23
// 10/16/06 CAMAC DGG corrected
// 12/28/07 Open corrected for bug when calling register after opening
/*
******** xxusb_longstack_execute ************************
 
Executes stack array passed to the function and returns the data read from the VME bus
 
Paramters:
hdev: USB device handle returned from an open function
DataBuffer: pointer to the dual use buffer
when calling , DataBuffer contains (unsigned short) stack data, with first word serving
as a placeholder
upon successful return, DataBuffer contains (unsigned short) VME data
lDataLen: The number of bytes to be fetched from VME bus - not less than the actual number
expected, or the function will return -5 code. For stack consisting only of write operations,
lDataLen may be set to 1.
timeout: The time in ms that should be spent tryimg to write data.
Returns:
When Successful, the number of bytes read from xxusb.
Upon failure, a negative number
 
Note:
The function must pass a pointer to an array of unsigned integer stack data, in which the first word
is left empty to serve as a placeholder.
The function is intended for executing Uint32_t stacks, up to 4 MBytes Uint32_t, both "write" and "read"
oriented, such as using multi-block transfer operations.
Structure upon call:
DataBuffer(0) = 0(don't care place holder)
DataBuffer(1) = (unsigned short)StackLength bits 0-15
DataBuffer(2) = (unsigned short)StackLength bits 16-20
DataBuffer(3 - StackLength +2) (unsigned short) stack data
StackLength represents the number of words following DataBuffer(1) word, thus the total number
of words is StackLength+2
Structure upon return:
DataBuffer(0 - (ReturnValue/2-1)) - (unsigned short)array of returned data when ReturnValue>0
*/
 
int xxusb_longstack_execute(usb_dev_handle *hDev, void *DataBuffer, int lDataLen, int timeout)
{
int ret;
char *cbuf;
unsigned short *usbuf;
int bufsize;
cbuf = (char *)DataBuffer;
usbuf = (unsigned short *)DataBuffer;
cbuf[0]=12;
cbuf[1]=0;
bufsize = 2*(usbuf[1]+0x10000*usbuf[2])+4;
ret=usb_bulk_write(hDev, XXUSB_ENDPOINT_OUT, cbuf, bufsize, timeout);
if (ret>0)
ret=usb_bulk_read(hDev, XXUSB_ENDPOINT_IN, cbuf, lDataLen, timeout);
return ret;
}
 
/*
******** xxusb_bulk_read ************************
 
Reads the content of the usbfifo whenever "FIFO full" flag is set,
otherwise times out.
Paramters:
hdev: USB device handle returned from an open function
DataBuffer: pointer to an array to store data that is read from the VME bus;
the array may be declared as byte, unsigned short, or unsigned Uint32_t
lDatalen: The number of bytes to read from xxusb
timeout: The time in ms that should be spent waiting for data.
Returns:
When Successful, the number of bytes read from xxusb.
Upon failure, a negative number
 
Note:
Depending upon the actual need, the function may be used to return the data in a form
of an array of bytes, unsigned short integers (16 bits), or unsigned Uint32_t integers (32 bits).
The latter option of passing a pointer to an array of unsigned Uint32_t integers is meaningful when
xxusb data buffering option is used (bit 7=128 of the global register) that requires data
32-bit data alignment.
 
*/
int xxusb_bulk_read(usb_dev_handle *hDev, void *DataBuffer, int lDataLen, int timeout)
{
int ret;
char *cbuf;
cbuf = (char *)DataBuffer;
ret = usb_bulk_read(hDev, XXUSB_ENDPOINT_IN, cbuf, lDataLen, timeout);
return ret;
}
 
/*
******** xxusb_bulk_write ************************
 
Writes the content of an array of bytes, unsigned short integers, or unsigned Uint32_t integers
to the USB port fifo; times out when the USB fifo is full (e.g., when xxusb is busy).
Paramters:
hdev: USB device handle returned from an open function
DataBuffer: pointer to an array storing the data to be sent;
the array may be declared as byte, unsigned short, or unsigned Uint32_t
lDatalen: The number of bytes to to send to xxusb
timeout: The time in ms that should be spent waiting for data.
Returns:
When Successful, the number of bytes passed to xxusb.
Upon failure, a negative number
 
Note:
Depending upon the actual need, the function may be used to pass to xxusb the data in a form
of an array of bytes, unsigned short integers (16 bits), or unsigned Uint32_t integers (32 bits).
*/
int xxusb_bulk_write(usb_dev_handle *hDev, void *DataBuffer, int lDataLen, int timeout)
{
int ret;
char *cbuf;
cbuf = (char *)DataBuffer;
ret = usb_bulk_write(hDev, XXUSB_ENDPOINT_OUT, cbuf, lDataLen, timeout);
return ret;
}
 
/*
******** xxusb_usbfifo_read ************************
 
Reads data stored in the xxusb fifo and packs them in an array of Uint32_t integers.
Paramters:
hdev: USB device handle returned from an open function
DataBuffer: pointer to an array of Uint32_t to store data that is read
the data occupy only the least significant 16 bits of the 32-bit data words
lDatalen: The number of bytes to read from the xxusb
timeout: The time in ms that should be spent waiting for data.
Returns:
When Successful, the number of bytes read from xxusb.
Upon failure, a negative number
Note:
The function is not economical as it wastes half of the space required for storing
the data received. Also, it is relatively slow, as it performs extensive data repacking.
It is recommended to use xxusb_bulk_read with a pointer to an array of unsigned short
integers.
*/
int xxusb_usbfifo_read(usb_dev_handle *hDev, int *DataBuffer, int lDataLen, int timeout)
{
int ret;
char *cbuf;
unsigned short *usbuf;
int i;
 
cbuf = (char *)DataBuffer;
usbuf = (unsigned short *)DataBuffer;
 
ret = usb_bulk_read(hDev, XXUSB_ENDPOINT_IN, cbuf, lDataLen, timeout);
if (ret > 0)
for (i=ret/2-1; i >= 0; i=i-1)
{
usbuf[i*2]=usbuf[i];
usbuf[i*2+1]=0;
}
return ret;
}
 
 
//******************************************************//
//******************* GENERAL XX_USB *******************//
//******************************************************//
// The following are functions used for both VM_USB & CC_USB
 
 
/*
******** xxusb_register_write ************************
 
Writes Data to the xxusb register selected by RedAddr. For
acceptable values for RegData and RegAddr see the manual
the module you are using.
Parameters:
hdev: usb device handle returned from open device
RegAddr: The internal address if the xxusb
RegData: The Data to be written to the register
Returns:
Number of bytes sent to xxusb if successful
0 if the register is write only
Negative numbers if the call fails
*/
short xxusb_register_write(usb_dev_handle *hDev, short RegAddr, Uint32_t RegData)
{
Uint32_t RegD;
char buf[8]={5,0,0,0,0,0,0,0};
int ret;
int lDataLen;
int timeout;
if ((RegAddr==0) || (RegAddr==12) || (RegAddr==15))
return 0;
buf[2]=(char)(RegAddr & 15);
buf[4]=(char)(RegData & 255);
 
RegD = RegData >> 8;
buf[5]=(char)(RegD & 255);
RegD = RegD >>8;
if (RegAddr==8)
{
buf[6]=(char)(RegD & 255);
lDataLen=8;
}
else
lDataLen=6;
timeout=10;
ret=xxusb_bulk_write(hDev, buf, lDataLen, timeout);
return ret;
}
 
/*
******** xxusb_stack_write ************************
 
Writes a stack of VME/CAMAC calls to the VM_USB/CC_USB
to be executed upon trigger.
Parameters:
hdev: usb device handle returned from an open function
StackAddr: internal register to which the stack should be written
lpStackData: Pointer to an array holding the stack
Returns:
The number of Bytes written to the xxusb when successful
A negative number upon failure
*/
short xxusb_stack_write(usb_dev_handle *hDev, short StackAddr, Uint32_t *intbuf)
{
int timeout;
short ret;
short lDataLen;
char buf[2000];
short i;
int bufsize;
buf[0]=(char)((StackAddr & 51) + 4);
buf[1]=0;
lDataLen=(short)(intbuf[0] & 0xFFF);
buf[2]=(char)(lDataLen & 255);
lDataLen = lDataLen >> 8;
buf[3] = (char)(lDataLen & 255);
bufsize=intbuf[0]*2+4;
if (intbuf[0]==0)
return 0;
for (i=1; i <= intbuf[0]; i++)
{
buf[2+2*i] = (char)(intbuf[i] & 255);
buf[3+2*i] = (char)((intbuf[i] >>8) & 255);
}
timeout=50;
ret=usb_bulk_write(hDev, XXUSB_ENDPOINT_OUT, buf, bufsize, timeout);
return ret;
}
 
/*
******** xxusb_stack_execute **********************
 
Writes, executes and returns the value of a DAQ stack.
Parameters:
hdev: USB device handle returned from an open function
intbuf: Pointer to an array holding the values stack. Upon return
Pointer value is the Data returned from the stack.
Returns:
When successful, the number of Bytes read from xxusb
Upon Failure, a negative number.
*/
short xxusb_stack_execute(usb_dev_handle *hDev, Uint32_t *intbuf)
{
int timeout;
short ret;
short lDataLen;
char buf[26700];
short i;
int bufsize;
int ii = 0;
buf[0]=12;
buf[1]=0;
lDataLen=(short)(intbuf[0] & 0xFFF);
buf[2]=(char)(lDataLen & 255);
lDataLen = lDataLen >> 8;
buf[3] = (char)(lDataLen & 15);
bufsize=intbuf[0]*2+4;
if (intbuf[0]==0)
return 0;
for (i=1; i <= intbuf[0]; i++)
{
buf[2+2*i] = (char)(intbuf[i] & 255);
buf[3+2*i] = (char)((intbuf[i] >>8) & 255);
}
timeout=2000;
ret=usb_bulk_write(hDev, XXUSB_ENDPOINT_OUT, buf, bufsize, timeout);
if (ret>0)
{
lDataLen=26700;
timeout=6000;
ret=usb_bulk_read(hDev, XXUSB_ENDPOINT_IN, buf, lDataLen, timeout);
if (ret>0)
for (i=0; i < ret; i=i+2)
intbuf[ii++]=(UCHAR)(buf[i]) +(UCHAR)( buf[i+1])*256;
}
return ret;
}
 
/*
******** xxusb_stack_read ************************
 
Reads the current DAQ stack stored by xxusb
Parameters:
hdev: USB device handle returned by an open function
StackAddr: Indicates which stack to read, primary or secondary
intbuf: Pointer to a array where the stack can be stored
 
Returns:
Number of bytes read from xxusb when successful
Upon failure, a negative number
*/
short xxusb_stack_read(usb_dev_handle *hDev, short StackAddr, Uint32_t *intbuf)
{
int timeout;
short ret;
short lDataLen;
short bufsize;
char buf[1600];
int i;
 
buf[0]=(char)(StackAddr & 51);
buf[1]=0;
lDataLen = 2;
timeout=100;
ret=usb_bulk_write(hDev, XXUSB_ENDPOINT_OUT, buf, lDataLen, timeout);
if (ret < 0)
return ret;
else
bufsize=1600;
int ii=0;
{
ret=usb_bulk_read(hDev, XXUSB_ENDPOINT_IN, buf, bufsize, timeout);
if (ret>0)
for (i=0; i < ret; i=i+2)
intbuf[ii++]=(UCHAR)(buf[i]) + (UCHAR)(buf[i+1])*256;
return ret;
}
}
 
/*
******** xxusb_register_read ************************
 
Reads the current contents of an internal xxusb register
Parameters:
hdev: USB device handle returned from an open function
RegAddr: The internal address of the register from which to read
RegData: Pointer to a Uint32_t to hold the data.
Returns:
When Successful, the number of bytes read from xxusb.
Upon failure, a negative number
*/
short xxusb_register_read(usb_dev_handle *hDev, short RegAddr, Uint32_t *RegData)
{
//Uint32_t RegD;
int timeout;
char buf[4]={1,0,0,0};
int ret;
int lDataLen;
 
buf[2]=(char)(RegAddr & 15);
timeout=10;
lDataLen=4;
ret=xxusb_bulk_write(hDev, buf, lDataLen, timeout);
if (ret < 0)
return (short)ret;
else
{
lDataLen=8;
timeout=100;
ret=xxusb_bulk_read(hDev, buf, lDataLen, timeout);
if (ret<0)
return (short)ret;
else
{
*RegData=(UCHAR)(buf[0])+256*(UCHAR)(buf[1]);
if (ret==4)
*RegData=*RegData+0x10000*(UCHAR)(buf[2]);
return (short)ret;
}
}
}
 
/*
******** xxusb_reset_toggle ************************
 
Toggles the reset state of the FPGA while the xxusb in programming mode
Parameters
hdev: US B device handle returned from an open function
Returns:
Upon failure, a negative number
*/
short xxusb_reset_toggle(usb_dev_handle *hDev)
{
short ret;
char buf[2] = {(char)255,(char)255};
int lDataLen=2;
int timeout=1000;
ret = usb_bulk_write(hDev, XXUSB_ENDPOINT_OUT, buf,lDataLen, timeout);
return (short)ret;
}
 
/*
******** xxusb_devices_find ************************
 
Determines the number and parameters of all xxusb devices attched to
the computer.
Parameters:
xxdev: pointer to an array on which the device parameters are stored
 
Returns:
Upon success, returns the number of devices found
Upon Failure returns a negative number
*/
short xxusb_devices_find(xxusb_device_type *xxdev)
{
short DevFound = 0;
usb_dev_handle *udev;
struct usb_bus *bus;
struct usb_device *dev;
struct usb_bus *usb_busses;
char string[256];
short ret;
usb_init();
usb_find_busses();
usb_busses=usb_get_busses();
usb_find_devices();
for (bus=usb_busses; bus; bus = bus->next)
{
for (dev = bus->devices; dev; dev= dev->next)
{
if (dev->descriptor.idVendor==XXUSB_WIENER_VENDOR_ID)
{
udev = usb_open(dev);
if (udev)
{
ret = usb_get_string_simple(udev, dev->descriptor.iSerialNumber, string, sizeof(string));
if (ret >0 )
{
xxdev[DevFound].usbdev=dev;
strcpy(xxdev[DevFound].SerialString, string);
DevFound++;
}
usb_close(udev);
}
else return -1;
}
}
}
return DevFound;
}
 
/*
******** xxusb_device_close ************************
 
Closes an xxusb device
Parameters:
hdev: USB device handle returned from an open function
 
Returns: 1
*/
short xxusb_device_close(usb_dev_handle *hDev)
{
short ret;
ret=usb_release_interface(hDev,0);
usb_close(hDev);
return 1;
}
 
/*
******** xxusb_device_open ************************
 
Opens an xxusb device found by xxusb_device_find
Parameters:
dev: a usb device
Returns:
A USB device handle
*/
usb_dev_handle* xxusb_device_open(struct usb_device *dev)
{
short ret;
Uint32_t val;
int count =0;
usb_dev_handle *udev;
udev = usb_open(dev);
ret = usb_set_configuration(udev,1);
ret = usb_claim_interface(udev,0);
// RESET USB (added 10/16/06 Andreas Ruben)
ret=xxusb_register_write(udev, 10, 0x04);
// Loop to find known state (added 12/28/07 TH / AR)
ret =-1;
while ((ret <0) && (count <10))
{
xxusb_register_read(udev, 0, &val);
count++;
}
 
return udev;
}
 
/*
******** xxusb_flash_program ************************
 
--Untested and therefore uncommented--
*/
short xxusb_flash_program(usb_dev_handle *hDev, char *config, short nsect)
{
int i=0;
int k=0;
short ret=0;
time_t t1,t2;
 
char *pconfig;
char *pbuf;
pconfig=config;
char buf[518] ={(char)0xAA,(char)0xAA,(char)0x55,(char)0x55,(char)0xA0,(char)0xA0};
while (*pconfig++ != -1);
for (i=0; i<nsect; i++)
{
pbuf=buf+6;
for (k=0; k<256; k++)
{
*(pbuf++)=*(pconfig);
*(pbuf++)=*(pconfig++);
}
ret = usb_bulk_write(hDev, XXUSB_ENDPOINT_OUT, buf, 518, 2000);
if (ret<0)
return ret;
t1=clock()+(time_t)(0.03*CLOCKS_PER_SEC);
while (t1>clock());
t2=clock();
}
return ret;
}
 
/*
******** xxusb_flashblock_program ************************
 
--Untested and therefore uncommented--
*/
short xxusb_flashblock_program(usb_dev_handle *hDev, UCHAR *config)
{
int k=0;
short ret=0;
 
UCHAR *pconfig;
char *pbuf;
pconfig=config;
char buf[518] ={(char)0xAA,(char)0xAA,(char)0x55,(char)0x55,(char)0xA0,(char)0xA0};
pbuf=buf+6;
for (k=0; k<256; k++)
{
*(pbuf++)=(UCHAR)(*(pconfig));
*(pbuf++)=(UCHAR)(*(pconfig++));
}
ret = usb_bulk_write(hDev, XXUSB_ENDPOINT_OUT, buf, 518, 2000);
return ret;
}
 
/*
******** xxusb_serial_open ************************
 
Opens a xxusb device whose serial number is given
Parameters:
SerialString: a char string that gives the serial number of
the device you wish to open. It takes the form:
VM0009 - for a vm_usb with serial number 9 or
CC0009 - for a cc_usb with serial number 9
 
Returns:
A USB device handle
*/
usb_dev_handle* xxusb_serial_open(char *SerialString)
{
short DevFound = 0;
usb_dev_handle *udev = NULL;
struct usb_bus *bus;
struct usb_device *dev;
struct usb_bus *usb_busses;
char string[20];
short ret;
//usb_set_debug(4);
usb_init();
usb_find_busses();
usb_busses=usb_get_busses();
usb_find_devices();
for (bus=usb_busses; bus; bus = bus->next)
{
for (dev = bus->devices; dev; dev= dev->next)
{
if (dev->descriptor.idVendor==XXUSB_WIENER_VENDOR_ID)
{
printf("id %04x\n",dev->descriptor.idVendor);
udev = xxusb_device_open(dev);
if (udev)
{
ret = usb_get_string_simple(udev, dev->descriptor.iSerialNumber, string, sizeof(string));
printf("iSerial %04x string %s\n",dev->descriptor.iSerialNumber,string);
if (ret >0 )
{
printf(" Device with %s\n",SerialString);
 
if (strcmp(string,SerialString)==0){
printf(" Device with %s found\n",SerialString);
return udev;
}
} else {
printf(" Device returned %d\n",ret);
}
usb_close(udev);
}
}
}
}
udev = NULL;
return udev;
}
 
 
//******************************************************//
//****************** EZ_VME Functions ******************//
//******************************************************//
// The following are functions used to perform simple
// VME Functions with the VM_USB
 
/*
******** VME_write_32 ************************
 
Writes a 32 bit data word to the VME bus
Parameters:
hdev: USB devcie handle returned from an open function
Address_Modifier: VME address modifier for the VME call
VME_Address: Address to write the data to
Data: 32 bit data word to be written to VME_Address
 
Returns:
Number of bytes read from xxusb when successful
Upon failure, a negative number
*/
short VME_write_32(usb_dev_handle *hdev, short Address_Modifier, Uint32_t VME_Address, Uint32_t Data)
{
Uint32_t intbuf[1000];
short ret;
intbuf[0]=7;
intbuf[1]=0;
intbuf[2]=Address_Modifier;
intbuf[3]=0;
intbuf[4]=(VME_Address & 0xffff);
intbuf[5]=((VME_Address >>16) & 0xffff);
intbuf[6]=(Data & 0xffff);
intbuf[7]=((Data >> 16) & 0xffff);
ret = xxusb_stack_execute(hdev, intbuf);
return ret;
}
 
/*
******** VME_read_32 ************************
 
 
Reads a 32 bit data word from a VME address
Parameters:
hdev: USB devcie handle returned from an open function
Address_Modifier: VME address modifier for the VME call
VME_Address: Address to read the data from
Data: 32 bit data word read from VME_Address
 
Returns:
Number of bytes read from xxusb when successful
Upon failure, a negative number
*/
short VME_read_32(usb_dev_handle *hdev, short Address_Modifier, Uint32_t VME_Address, Uint32_t *Data)
{
Uint32_t intbuf[1000];
short ret;
intbuf[0]=5;
intbuf[1]=0;
intbuf[2]=Address_Modifier +0x100;
intbuf[3]=0;
intbuf[4]=(VME_Address & 0xffff);
intbuf[5]=((VME_Address >>16) & 0xffff);
ret = xxusb_stack_execute(hdev, intbuf);
*Data=intbuf[0] + (intbuf[1] * 0x10000);
return ret;
}
 
/*
******** VME_write_16 ************************
 
Writes a 16 bit data word to the VME bus
Parameters:
hdev: USB devcie handle returned from an open function
Address_Modifier: VME address modifier for the VME call
VME_Address: Address to write the data to
Data: word to be written to VME_Address
 
Returns:
Number of bytes read from xxusb when successful
Upon failure, a negative number
*/
short VME_write_16(usb_dev_handle *hdev, short Address_Modifier, Uint32_t VME_Address, Uint32_t Data)
{
Uint32_t intbuf[1000];
short ret;
intbuf[0]=7;
intbuf[1]=0;
intbuf[2]=Address_Modifier;
intbuf[3]=0;
intbuf[4]=(VME_Address & 0xffff)+ 0x01;
intbuf[5]=((VME_Address >>16) & 0xffff);
intbuf[6]=(Data & 0xffff);
intbuf[7]=0;
ret = xxusb_stack_execute(hdev, intbuf);
return ret;
}
 
/*
******** VME_read_16 ************************
 
Reads a 16 bit data word from a VME address
Parameters:
hdev: USB devcie handle returned from an open function
Address_Modifier: VME address modifier for the VME call
VME_Address: Address to read the data from
Data: word read from VME_Address
 
Returns:
Number of bytes read from xxusb when successful
Upon failure, a negative number
*/
short VME_read_16(usb_dev_handle *hdev,short Address_Modifier, Uint32_t VME_Address, Uint32_t *Data)
{
Uint32_t intbuf[1000];
short ret;
intbuf[0]=5;
intbuf[1]=0;
intbuf[2]=Address_Modifier +0x100;
intbuf[3]=0;
intbuf[4]=(VME_Address & 0xffff)+ 0x01;
intbuf[5]=((VME_Address >>16) & 0xffff);
ret = xxusb_stack_execute(hdev, intbuf);
*Data=intbuf[0];
return ret;
}
 
/*
******** VME_BLT_read_32 ************************
 
Performs block transfer of 32 bit words from a VME address
Parameters:
hdev: USB devcie handle returned from an open function
Address_Modifier: VME address modifier for the VME call
count: number of data words to read
VME_Address: Address to read the data from
Data: pointer to an array to hold the data words
 
Returns:
Number of bytes read from xxusb when successful
Upon failure, a negative number
*/
short VME_BLT_read_32(usb_dev_handle *hdev, short Adress_Modifier, int count, Uint32_t VME_Address, Uint32_t Data[])
{
Uint32_t intbuf[1000];
short ret;
int i=0;
if (count > 255) return -1;
intbuf[0]=5;
intbuf[1]=0;
intbuf[2]=Adress_Modifier +0x100;
intbuf[3]=(count << 8);
intbuf[4]=(VME_Address & 0xffff);
intbuf[5]=((VME_Address >>16) & 0xffff);
ret = xxusb_stack_execute(hdev, intbuf);
int j=0;
for (i=0;i<(2*count);i=i+2)
{
Data[j]=intbuf[i] + (intbuf[i+1] * 0x10000);
j++;
}
return ret;
}
 
//******************************************************//
//****************** VM_USB Registers ******************//
//******************************************************//
// The following are functions used to set the registers
// in the VM_USB
 
/*
******** VME_register_write ************************
 
Writes to the vmusb registers that are accessible through
VME style calls
Parameters:
hdev: USB devcie handle returned from an open function
VME_Address: The VME Address of the internal register
Data: Data to be written to VME_Address
 
Returns:
Number of bytes read from xxusb when successful
Upon failure, a negative number
*/
short VME_register_write(usb_dev_handle *hdev, Uint32_t VME_Address, Uint32_t Data)
{
Uint32_t intbuf[1000];
short ret;
 
intbuf[0]=7;
intbuf[1]=0;
intbuf[2]=0x1000;
intbuf[3]=0;
intbuf[4]=(VME_Address & 0xffff);
intbuf[5]=((VME_Address >>16) & 0xffff);
intbuf[6]=(Data & 0xffff);
intbuf[7]=((Data >> 16) & 0xffff);
ret = xxusb_stack_execute(hdev, intbuf);
return ret;
}
 
/*
******** VME_register_read ************************
 
Reads from the vmusb registers that are accessible trough VME style calls
Parameters:
hdev: USB devcie handle returned from an open function
VME_Address: The VME Address of the internal register
Data: Data read from VME_Address
 
Returns:
Number of bytes read from xxusb when successful
Upon failure, a negative number
*/
short VME_register_read(usb_dev_handle *hdev, Uint32_t VME_Address, Uint32_t *Data)
{
Uint32_t intbuf[1000];
short ret;
 
intbuf[0]=5;
intbuf[1]=0;
intbuf[2]=0x1100;
intbuf[3]=0;
intbuf[4]=(VME_Address & 0xffff);
intbuf[5]=((VME_Address >>16) & 0xffff);
ret = xxusb_stack_execute(hdev, intbuf);
*Data=intbuf[0] + (intbuf[1] * 0x10000);
return ret;
}
 
/*
******** VME_LED_settings ************************
 
Sets the vmusb LED's
Parameters:
hdev: USB devcie handle returned from an open function
LED: The number which corresponds to an LED values are:
0 - for Top YELLOW LED
1 - for RED LED
2 - for GREEN LED
3 - for Bottom YELLOW LED
code: The LED aource selector code, valid values for each LED
are listed in the manual
invert: to invert the LED lighting
latch: sets LED latch bit
 
Returns:
Number of bytes read from xxusb when successful
Upon failure, a negative number
*/
short VME_LED_settings(usb_dev_handle *hdev, int LED, int code, int invert, int latch)
{
short ret;
// Uint32_t internal;
Uint32_t Data;
if( (LED <0) ||(LED > 3) || (code < 0) || (code > 7)) return -1;
VME_register_read(hdev,0xc,&Data);
if(LED == 0)
{
Data = Data & 0xFFFFFF00;
Data = Data | code;
if (invert == 1 && latch == 1) Data = Data | 0x18;
if (invert == 1 && latch == 0) Data = Data | 0x08;
if (invert == 0 && latch == 1) Data = Data | 0x10;
}
if(LED == 1)
{
Data = Data & 0xFFFF00FF;
Data = Data | (code * 0x0100);
if (invert == 1 && latch == 1) Data = Data | 0x1800;
if (invert == 1 && latch == 0) Data = Data | 0x0800;
if (invert == 0 && latch == 1) Data = Data | 0x1000;
}
if(LED == 2)
{
Data = Data & 0xFF00FFFF;
Data = Data | (code * 0x10000);
if (invert == 1 && latch == 1) Data = Data | 0x180000;
if (invert == 1 && latch == 0) Data = Data | 0x080000;
if (invert == 0 && latch == 1) Data = Data | 0x100000;
}
if(LED == 3)
{
Data = Data & 0x00FFFFFF;
Data = Data | (code * 0x10000);
if (invert == 1 && latch == 1) Data = Data | 0x18000000;
if (invert == 1 && latch == 0) Data = Data | 0x08000000;
if (invert == 0 && latch == 1) Data = Data | 0x10000000;
}
ret = VME_register_write(hdev, 0xc, Data);
return ret;
}
 
/*
******** VME_DGG ************************
 
Sets the parameters for Gate & Delay channel A of vmusb
Parameters:
hdev: USB devcie handle returned from an open function
channel: Which DGG channel to use Valid Values are:
0 - For DGG A
1 - For DGG B
trigger: Determines what triggers the start of the DGG Valid values are:
0 - Channel disabled
1 - NIM input 1
2 - NIM input 2
3 - Event Trigger
4 - End of Event
5 - USB Trigger
6 - Pulser
output: Determines which NIM output to use for the channel, Vaild values are:
0 - for NIM O1
1 - for NIM O2
delay: 32 bit word consisting of
lower 16 bits: Delay_fine in steps of 12.5ns between trigger and start of gate
upper 16 bits: Delay_coarse in steps of 81.7us between trigger and start of gate
gate: the time the gate should stay open in steps of 12.5ns
invert: is 1 if you wish to invert the DGG channel output
latch: is 1 if you wish to run the DGG channel latched
 
Returns:
Returns 1 when successful
Upon failure, a negative number
*/
short VME_DGG(usb_dev_handle *hdev, unsigned short channel, unsigned short trigger, unsigned short output,
Uint32_t delay, unsigned short gate, unsigned short invert, unsigned short latch)
{
Uint32_t Data, DGData, Delay_ext;
Uint32_t internal;
short ret;
 
 
ret = VME_register_read(hdev, 0x10, &Data);
// check and correct values
if(ret<=0) return -1;
 
if(channel >1) channel =1;
if(invert >1) invert =1;
if(latch >1) latch =1;
if(output >1) output =1;
if(trigger >6) trigger =0;
 
// define Delay and Gate data
DGData = gate * 0x10000;
DGData += (unsigned short) delay;
 
// Set channel, output, invert, latch
if (output == 0)
{
Data = Data & 0xFFFFFF00;
Data += 0x04 + channel +0x08*invert + 0x10*latch;
}
if (output == 1)
{
Data = Data & 0xFFFF00FF;
Data += (0x04 + channel +0x08*invert + 0x10*latch)*0x100;
}
 
// Set trigger, delay, gate
 
if(channel ==0) // CHANNEL DGG_A
{
internal = (trigger * 0x1000000) ;
Data= Data & 0xF0FFFFFF;
Data += internal;
ret = VME_register_write(hdev,0x10,Data);
if(ret<=0) return -1;
ret=VME_register_write(hdev,0x14,DGData);
if(ret<=0) return -1;
// Set coarse delay in DGG_Extended register
ret = VME_register_read(hdev,0x38,&Data);
Delay_ext= (Data & 0xffff0000);
Delay_ext+= ((delay/0x10000) & 0xffff);
ret = VME_register_write(hdev,0x38,Delay_ext);
}
if( channel ==1) // CHANNEL DGG_B
{
internal = (trigger * 0x10000000) ;
Data= Data & 0x0FFFFFFF;
Data += internal;
ret = VME_register_write(hdev,0x10,Data);
if(ret<=0) return -1;
ret=VME_register_write(hdev,0x18,DGData);
if(ret<=0) return -1;
// Set coarse delay in DGG_Extended register
ret = VME_register_read(hdev,0x38,&Data);
Delay_ext= (Data & 0x0000ffff);
Delay_ext+= (delay & 0xffff0000);
ret = VME_register_write(hdev,0x38,Delay_ext);
}
return 1;
}
 
/*
******** VME_Output_settings ************************
 
Sets the vmusb NIM output register
Parameters:
hdev: USB devcie handle returned from an open function
Channel: The number which corresponds to an output:
1 - for Output 1
2 - for Output 2
code: The Output selector code, valid values
are listed in the manual
invert: to invert the output
latch: sets latch bit
 
Returns:
Number of bytes read from xxusb when successful
Upon failure, a negative number
*/
short VME_Output_settings(usb_dev_handle *hdev, int Channel, int code, int invert, int latch)
{
 
short ret;
// Uint32_t internal;
Uint32_t Data;
if( (Channel <1) ||(Channel > 2) || (code < 0) || (code > 7)) return -1;
VME_register_read(hdev,0x10,&Data);
if(Channel == 1)
{
Data = Data & 0xFFFF00;
Data = Data | code;
if (invert == 1 && latch == 1) Data = Data | 0x18;
if (invert == 1 && latch == 0) Data = Data | 0x08;
if (invert == 0 && latch == 1) Data = Data | 0x10;
}
if(Channel == 2)
{
Data = Data & 0xFF00FF;
Data = Data | (code * 0x0100);
if (invert == 1 && latch == 1) Data = Data | 0x1800;
if (invert == 1 && latch == 0) Data = Data | 0x0800;
if (invert == 0 && latch == 1) Data = Data | 0x1000;
}
ret = VME_register_write(hdev, 0x10, Data);
return ret;
}
 
 
//******************************************************//
//****************** CC_USB Registers ******************//
//******************************************************//
// The following are functions used to set the registers
// in the CAMAC_USB
 
/*
******** CAMAC_register_write *****************
 
Performs a CAMAC write to CC_USB register
Parameters:
hdev: USB device handle returned from an open function
A: CAMAC Subaddress
F: CAMAC Function
Data: data to be written
Returns:
Number of bytes written to xxusb when successful
Upon failure, a negative number
*/
short CAMAC_register_write(usb_dev_handle *hdev, int A, Uint32_t Data)
{
int F = 16;
int N = 25;
Uint32_t intbuf[4];
int ret;
 
intbuf[0]=1;
intbuf[1]=(Uint32_t)(F+A*32+N*512 + 0x4000);
intbuf[0]=3;
intbuf[2]=(Data & 0xffff);
intbuf[3]=((Data >>16) & 0xffff);
ret = xxusb_stack_execute(hdev, intbuf);
 
return ret;
}
 
/*
******** CAMAC_register_read ************************
 
Performs a CAMAC read from CC_USB register
Parameters:
hdev: USB device handle returned from an open function
N: CAMAC Station Number
A: CAMAC Subaddress
F: CAMAC Function
Q: The Q response from the CAMAC dataway
X: The comment accepted response from CAMAC dataway
Returns:
Number of bytes read from xxusb when successful
Upon failure, a negative number
*/
short CAMAC_register_read(usb_dev_handle *hdev, int A, Uint32_t *Data)
{
int F = 0;
int N = 25;
Uint32_t intbuf[4];
int ret;
 
intbuf[0]=1;
intbuf[1]=(Uint32_t)(F+A*32+N*512 + 0x4000);
ret = xxusb_stack_execute(hdev, intbuf);
*Data=intbuf[0] + (intbuf[1] * 0x10000);
 
return ret;
}
 
/*
******** CAMAC_DGG ************************
 
Sets the parameters for Gate & Delay channel A of CC_USB
Parameters:
hdev: USB devcie handle returned from an open function
channel: Which DGG channel to use Valid Values are:
0 - For DGG A
1 - For DGG B
trigger: Determines what triggers the start of the DGG Valid values are:
0 - Channel disabled
1 - NIM input 1
2 - NIM input 2
3 - NIM input 2
4 - Event Trigger
5 - End of Event
6 - USB Trigger
7 - Pulser
output: Determines which NIM output to use for the channel, Vaild values are:
1 - for NIM O1
2 - for NIM O2
3 - for NIM O3
delay: Delay in steps of 12.5ns between trigger and start of gate
gate: the time the gate should stay open in steps of 12.5ns
invert: is 1 if you wish to invert the DGG channel output
latch: is 1 if you wish to run the DGG channel latched
 
Returns:
Returns 1 when successful
Upon failure, a negative number
*/
short CAMAC_DGG(usb_dev_handle *hdev, short channel, short trigger, short output,
int delay, int gate, short invert, short latch)
 
 
 
{
// short channel_ID;
Uint32_t Data;
Uint32_t internal;
short ret;
Uint32_t Delay_ext;
 
ret = CAMAC_register_read(hdev,5,&Data);
//Set trigger
if((output < 1 ) || (output >3) || (channel < 0 ) || (channel > 1))
return -1;
if(output ==1)
{
if(channel ==0)
{
internal = 0x03;
} else {
internal = 0x04;
}
}
if(output ==2)
{
if(channel ==0)
{
internal = 0x04;
} else {
internal = 0x05;
}
}
if(output ==3)
{
if(channel ==0)
{
internal = 0x05;
} else {
internal = 0x06;
}
}
 
 
// Set invert bit
if(invert ==1)
internal = internal | 0x10;
else
internal = internal & 0x0F;
// Set Latch Bit
if(latch==1)
internal = internal | 0x20;
else
internal = internal & 0x1F;
// Add new data to old
if(output == 1)
{
Data = Data & 0xFFFF00;
Data = Data | internal;
}
if(output == 2)
{
Data = Data & 0xFF00FF;
Data = Data |(internal * 0x100);
}
if(output == 3)
{
Data = Data & 0x00FFFF;
Data = Data | (internal * 0x10000) ;
}
CAMAC_register_write(hdev, 5, Data);
ret = CAMAC_register_read(hdev,6,&Data);
//Set Trigger
if(trigger <0 || trigger > 7)
return -1;
if(channel ==0)
{
Data = Data & 0xFF00FFFF;
internal = trigger * 0x10000;
Data = Data | internal;
} else {
Data = Data & 0x00FFFFFF;
internal = trigger * 0x1000000;
Data = Data | internal;
}
ret = CAMAC_register_write(hdev, 6, Data);
if(channel == 0)
{
// Write Delay and Gate info
ret = CAMAC_register_read(hdev,13,&Data);
Delay_ext= (Data & 0xffff0000);
Delay_ext+= ((delay/0x10000) & 0xffff);
internal = gate * 0x10000;
Data = internal + (delay & 0xffff);
ret=CAMAC_register_write(hdev,7,Data);
// Set coarse delay in DGG_Extended register
ret=CAMAC_register_write(hdev,13,Delay_ext);
}
else
{
ret=CAMAC_register_write(hdev,8,Data);
ret = CAMAC_register_read(hdev,13,&Data);
Delay_ext= (Data & 0x0000ffff);
Delay_ext+= (delay & 0xffff0000);
internal = gate * 0x10000;
Data = internal + (delay & 0xffff);
// Set coarse delay in DGG_Extended register
ret=CAMAC_register_write(hdev,13,Delay_ext);
}
return 1;
}
 
/*
******** CAMAC_LED_settings ************************
 
Writes a data word to the vmusb LED register
Parameters:
hdev: USB devcie handle returned from an open function
LED: The number which corresponds to an LED values are:
1 - for RED LED
2 - for GREEN LED
3 - for Yellow LED
code: The LED aource selector code, valid values for each LED
are listed in the manual
invert: to invert the LED lighting
latch: sets LED latch bit
 
Returns:
Number of bytes read from xxusb when successful
Upon failure, a negative number
*/
short CAMAC_LED_settings(usb_dev_handle *hdev, int LED, int code, int invert, int latch)
{
 
short ret;
// Uint32_t internal;
Uint32_t Data;
if( (LED <1) ||(LED > 3) || (code < 0) || (code > 7))
return -1;
CAMAC_register_read(hdev,4,&Data);
if(LED == 1)
{
Data = Data & 0xFFFF00;
Data = Data | code;
if (invert == 1 && latch == 1)
Data = Data | 0x30;
if (invert == 1 && latch == 0)
Data = Data | 0x10;
if (invert == 0 && latch == 1)
Data = Data | 0x20;
}
if(LED == 2)
{
Data = Data & 0xFF00FF;
Data = Data | (code * 0x0100);
if (invert == 1 && latch == 1)
Data = Data | 0x3000;
if (invert == 1 && latch == 0)
Data = Data | 0x1000;
if (invert == 0 && latch == 1)
Data = Data | 0x2000;
}
if(LED == 3)
{
Data = Data & 0x00FFFF;
Data = Data | (code * 0x10000);
if (invert == 1 && latch == 1)
Data = Data | 0x300000;
if (invert == 1 && latch == 0)
Data = Data | 0x100000;
if (invert == 0 && latch == 1)
Data = Data | 0x200000;
}
ret = CAMAC_register_write(hdev, 4, Data);
return ret;
}
 
/*
******** CAMAC_Output_settings ************************
 
Writes a data word to the vmusb LED register
Parameters:
hdev: USB devcie handle returned from an open function
Channel: The number which corresponds to an output:
1 - for Output 1
2 - for Output 2
3 - for Output 3
code: The Output selector code, valid values
are listed in the manual
invert: to invert the output
latch: sets latch bit
 
Returns:
Number of bytes read from xxusb when successful
Upon failure, a negative number
*/
short CAMAC_Output_settings(usb_dev_handle *hdev, int Channel, int code, int invert, int latch)
{
short ret;
// Uint32_t internal;
Uint32_t Data;
if( (Channel <1) ||(Channel > 3) || (code < 0) || (code > 7))
return -1;
CAMAC_register_read(hdev,5,&Data);
if(Channel == 1)
{
Data = Data & 0xFFFF00;
Data = Data | code;
if (invert == 1 && latch == 1)
Data = Data | 0x30;
if (invert == 1 && latch == 0)
Data = Data | 0x10;
if (invert == 0 && latch == 1)
Data = Data | 0x20;
}
if(Channel == 2)
{
Data = Data & 0xFF00FF;
Data = Data | (code * 0x0100);
if (invert == 1 && latch == 1)
Data = Data | 0x3000;
if (invert == 1 && latch == 0)
Data = Data | 0x1000;
if (invert == 0 && latch == 1)
Data = Data | 0x2000;
}
if(Channel == 3)
{
Data = Data & 0x00FFFF;
Data = Data | (code * 0x10000);
if (invert == 1 && latch == 1)
Data = Data | 0x300000;
if (invert == 1 && latch == 0)
Data = Data | 0x100000;
if (invert == 0 && latch == 1)
Data = Data | 0x200000;
}
ret = CAMAC_register_write(hdev, 5, Data);
return ret;
}
 
/*
******** CAMAC_write_LAM_mask ************************
 
Writes the data word to the LAM mask register
Parameters:
hdev: USB devcie handle returned from an open function
Data: LAM mask to write
 
Returns:
Number of bytes read from xxusb when successful
Upon failure, a negative number
*/
short CAMAC_write_LAM_mask(usb_dev_handle *hdev, Uint32_t Data)
{
short ret;
ret = CAMAC_register_write(hdev, 9, Data);
 
return ret;
}
 
/*
******** CAMAC_read_LAM_mask ************************
 
Writes the data word to the LAM mask register
Parameters:
hdev: USB devcie handle returned from an open function
Data: LAM mask to write
 
Returns:
Number of bytes read from xxusb when successful
Upon failure, a negative number
*/
short CAMAC_read_LAM_mask(usb_dev_handle *hdev, Uint32_t *Data)
{
Uint32_t intbuf[4];
int ret;
int N = 25;
int F = 0;
int A = 9;
 
// CAMAC direct read function
intbuf[0]=1;
intbuf[1]=(Uint32_t)(F+A*32+N*512 + 0x4000);
ret = xxusb_stack_execute(hdev, intbuf);
*Data=intbuf[0] + (intbuf[1] & 255) * 0x10000;
return ret;
}
 
 
//******************************************************//
//**************** EZ_CAMAC Functions ******************//
//******************************************************//
// The following are functions used to perform simple
// CAMAC Functions with the CC_USB
 
 
/*
******** CAMAC_write ************************
 
Performs a CAMAC write using NAF comments
Parameters:
hdev: USB device handle returned from an open function
N: CAMAC Station Number
A: CAMAC Subaddress
F: CAMAC Function (16...23)
Q: The Q response from the CAMAC dataway
X: The comment accepted response from CAMAC dataway
Returns:
Number of bytes written to xxusb when successful
Upon failure, a negative number
*/
short CAMAC_write(usb_dev_handle *hdev, int N, int A, int F, Uint32_t Data, int *Q, int *X)
{
Uint32_t intbuf[4];
int ret;
// CAMAC direct write function
intbuf[0]=1;
intbuf[1]=(Uint32_t)(F+A*32+N*512 + 0x4000);
if ((F > 15) && (F < 24))
{
intbuf[0]=3;
intbuf[2]=(Data & 0xffff);
intbuf[3]=((Data >>16) & 255);
ret = xxusb_stack_execute(hdev, intbuf);
*Q = (intbuf[0] & 1);
*X = ((intbuf[0] >> 1) & 1);
}
return ret;
}
 
/*
******** CAMAC_read ************************
 
Performs a CAMAC read using NAF comments
Parameters:
hdev: USB device handle returned from an open function
N: CAMAC Station Number
A: CAMAC Subaddress
F: CAMAC Function (F<16 or F>23)
Q: The Q response from the CAMAC dataway
X: The comment accepted response from CAMAC dataway
Returns:
Number of bytes read from xxusb when successful
Upon failure, a negative number
*/
short CAMAC_read(usb_dev_handle *hdev, int N, int A, int F, Uint32_t *Data, int *Q, int *X)
{
Uint32_t intbuf[4];
int ret;
// CAMAC direct read function
intbuf[0]=1;
intbuf[1]=(Uint32_t)(F+A*32+N*512 + 0x4000);
ret = xxusb_stack_execute(hdev, intbuf);
if ((F < 16) || (F >23))
{
*Data=intbuf[0] + (intbuf[1] & 255) * 0x10000; //24-bit word
*Q = ((intbuf[1] >> 8) & 1);
*X = ((intbuf[1] >> 9) & 1);
}
return ret;
}
 
/*
******** CAMAC_Z ************************
 
Performs a CAMAC init
Parameters:
hdev: USB device handle returned from an open function
Returns:
Number of bytes written to xxusb when successful
Upon failure, a negative number
*/
short CAMAC_Z(usb_dev_handle *hdev)
{
Uint32_t intbuf[4];
int ret;
// CAMAC Z = N(28) A(8) F(29)
intbuf[0]=1;
intbuf[1]=(Uint32_t)(29+8*32+28*512 + 0x4000);
ret = xxusb_stack_execute(hdev, intbuf);
return ret;
}
 
/*
******** CAMAC_C ************************
 
Performs a CAMAC clear
Parameters:
hdev: USB device handle returned from an open function
Returns:
Number of bytes written to xxusb when successful
Upon failure, a negative number
*/
short CAMAC_C(usb_dev_handle *hdev)
{
Uint32_t intbuf[4];
int ret;
intbuf[0]=1;
intbuf[1]=(Uint32_t)(29+9*32+28*512 + 0x4000);
ret = xxusb_stack_execute(hdev, intbuf);
return ret;
}
 
/*
******** CAMAC_I ************************
 
Set CAMAC inhibit
Parameters:
hdev: USB device handle returned from an open function
Returns:
Number of bytes written to xxusb when successful
Upon failure, a negative number
*/
short CAMAC_I(usb_dev_handle *hdev, int inhibit)
{
Uint32_t intbuf[4];
int ret;
intbuf[0]=1;
if (inhibit) intbuf[1]=(Uint32_t)(24+9*32+29*512 + 0x4000);
else intbuf[1]=(Uint32_t)(26+9*32+29*512 + 0x4000);
ret = xxusb_stack_execute(hdev, intbuf);
return ret;
}
 
 
Property changes:
Added: svn:executable
Index: petdaqfmf/VMEModule.cc
===================================================================
--- petdaqfmf/VMEModule.cc (nonexistent)
+++ petdaqfmf/VMEModule.cc (revision 112)
@@ -0,0 +1,42 @@
+/********************\
+ VMEModule.hh
+\********************/
+
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/mman.h>
+#include "VMEModule.hh"
+#include "wienvme_dll.h"
+
+
+VMEModule::VMEModule(int device ,caddr_t vmeaddr, size_t size) {
+ m_vmeaddr = vmeaddr;
+ m_baseaddress = (unsigned long)(vmeaddr) ;
+}
+
+VMEModule::~VMEModule() {
+
+}
+
+void VMEModule::write32( unsigned long address, unsigned long value ) {
+ VME_write32(address, (void *) &value);
+}
+
+unsigned long VMEModule::read32( unsigned long address ){
+ unsigned long data;
+ VME_read32( address, (void *) &data);
+ return data;
+}
+
+void VMEModule::write16( unsigned long address, unsigned short value ) {
+ VME_write16( address, (void *) &value);
+}
+
+unsigned short VMEModule::read16( unsigned long address ){
+ unsigned long data;
+ VME_read16( address, (void *) &data);
+ return (short) (data& 0xFFFF);
+}
+
+
Index: petdaqfmf/CAENV965.h
===================================================================
--- petdaqfmf/CAENV965.h (nonexistent)
+++ petdaqfmf/CAENV965.h (revision 112)
@@ -0,0 +1,13 @@
+#ifndef _CAENV965_H
+#define _CAENV965_H
+
+#define _VI_FUNC
+
+int _VI_FUNC V965_map (int ModuleNumber, unsigned long ModuleOffset, int print) ;
+int _VI_FUNC V965_init (int ModuleNumber, unsigned short ped) ;
+int _VI_FUNC V965_clear (int ModuleNumber) ;
+int _VI_FUNC V965_status (int ModuleNumber) ;
+int _VI_FUNC V965_status2 (int ModuleNumber) ;
+int _VI_FUNC V965_read (int ModuleNumber, unsigned long whereto[],int len);
+
+#endif
Index: petdaqfmf/libxxusb.h
===================================================================
--- petdaqfmf/libxxusb.h (nonexistent)
+++ petdaqfmf/libxxusb.h (revision 112)
@@ -0,0 +1,114 @@
+#include <usb.h>
+
+
+#define XXUSB_WIENER_VENDOR_ID 0x16DC /* Wiener, Plein & Baus */
+#define XXUSB_VMUSB_PRODUCT_ID 0x000B /* VM-USB */
+#define XXUSB_CCUSB_PRODUCT_ID 0x0001 /* CC-USB */
+#define XXUSB_ENDPOINT_OUT 2 /* Endpoint 2 Out*/
+#define XXUSB_ENDPOINT_IN 0x86 /* Endpoint 6 In */
+#define XXUSB_FIRMWARE_REGISTER 0
+#define XXUSB_GLOBAL_REGISTER 1
+#define XXUSB_ACTION_REGISTER 10
+#define XXUSB_DELAYS_REGISTER 2
+#define XXUSB_WATCHDOG_REGISTER 3
+#define XXUSB_SELLEDA_REGISTER 6
+#define XXUSB_SELNIM_REGISTER 7
+#define XXUSB_SELLEDB_REGISTER 4
+#define XXUSB_SERIAL_REGISTER 15
+#define XXUSB_LAMMASK_REGISTER 8
+#define XXUSB_LAM_REGISTER 12
+#define XXUSB_READOUT_STACK 2
+#define XXUSB_SCALER_STACK 3
+#define XXUSB_NAF_DIRECT 12
+
+// dodal 19.4.2011 da dela na 64-bit masinah
+typedef unsigned int Uint32_t;
+
+struct XXUSB_STACK
+{
+Uint32_t Data;
+short Hit;
+short APatt;
+short Num;
+short HitMask;
+};
+
+struct XXUSB_CC_COMMAND_TYPE
+{
+short Crate;
+short F;
+short A;
+short N;
+Uint32_t Data;
+short NoS2;
+short LongD;
+short HitPatt;
+short QStop;
+short LAMMode;
+short UseHit;
+short Repeat;
+short AddrScan;
+short FastCam;
+short NumMod;
+short AddrPatt;
+Uint32_t HitMask[4];
+Uint32_t Num;
+};
+
+struct xxusb_device_typ
+{
+ struct usb_device *usbdev;
+ char SerialString[7];
+};
+
+typedef struct xxusb_device_typ xxusb_device_type;
+typedef unsigned char UCHAR;
+typedef struct usb_bus usb_busx;
+
+
+int xxusb_longstack_execute(usb_dev_handle *hDev, void *DataBuffer, int lDataLen, int timeout);
+int xxusb_bulk_read(usb_dev_handle *hDev, void *DataBuffer, int lDataLen, int timeout);
+int xxusb_bulk_write(usb_dev_handle *hDev, void *DataBuffer, int lDataLen, int timeout);
+int xxusb_usbfifo_read(usb_dev_handle *hDev, int *DataBuffer, int lDataLen, int timeout);
+
+short xxusb_register_read(usb_dev_handle *hDev, short RegAddr, Uint32_t *RegData);
+short xxusb_stack_read(usb_dev_handle *hDev, short StackAddr, Uint32_t *StackData);
+short xxusb_stack_write(usb_dev_handle *hDev, short StackAddr, Uint32_t *StackData);
+short xxusb_stack_execute(usb_dev_handle *hDev, Uint32_t *StackData);
+short xxusb_register_write(usb_dev_handle *hDev, short RegAddr, Uint32_t RegData);
+short xxusb_reset_toggle(usb_dev_handle *hDev);
+
+short xxusb_devices_find(xxusb_device_type *xxusbDev);
+short xxusb_device_close(usb_dev_handle *hDev);
+usb_dev_handle* xxusb_device_open(struct usb_device *dev);
+short xxusb_flash_program(usb_dev_handle *hDev, char *config, short nsect);
+short xxusb_flashblock_program(usb_dev_handle *hDev, UCHAR *config);
+usb_dev_handle* xxusb_serial_open(char *SerialString);
+
+short VME_register_write(usb_dev_handle *hdev, Uint32_t VME_Address, Uint32_t Data);
+short VME_register_read(usb_dev_handle *hdev, Uint32_t VME_Address, Uint32_t *Data);
+short VME_LED_settings(usb_dev_handle *hdev, int LED, int code, int invert, int latch);
+short VME_DGG(usb_dev_handle *hdev, unsigned short channel, unsigned short trigger,unsigned short output, Uint32_t delay, unsigned short gate, unsigned short invert, unsigned short latch);
+
+short VME_Output_settings(usb_dev_handle *hdev, int Channel, int code, int invert, int latch);
+
+short VME_read_16(usb_dev_handle *hdev,short Address_Modifier, Uint32_t VME_Address, Uint32_t *Data);
+short VME_read_32(usb_dev_handle *hdev, short Address_Modifier, Uint32_t VME_Address, Uint32_t *Data);
+short VME_BLT_read_32(usb_dev_handle *hdev, short Address_Modifier, int count, Uint32_t VME_Address, Uint32_t Data[]);
+short VME_write_16(usb_dev_handle *hdev, short Address_Modifier, Uint32_t VME_Address, Uint32_t Data);
+short VME_write_32(usb_dev_handle *hdev, short Address_Modifier, Uint32_t VME_Address, Uint32_t Data);
+
+short CAMAC_DGG(usb_dev_handle *hdev, short channel, short trigger, short output, int delay, int gate, short invert, short latch);
+short CAMAC_register_read(usb_dev_handle *hdev, int A, Uint32_t *Data);
+short CAMAC_register_write(usb_dev_handle *hdev, int A, Uint32_t Data);
+short CAMAC_LED_settings(usb_dev_handle *hdev, int LED, int code, int invert, int latch);
+short CAMAC_Output_settings(usb_dev_handle *hdev, int Channel, int code, int invert, int latch);
+short CAMAC_read_LAM_mask(usb_dev_handle *hdev, Uint32_t *Data);
+short CAMAC_write_LAM_mask(usb_dev_handle *hdev, Uint32_t Data);
+
+short CAMAC_write(usb_dev_handle *hdev, int N, int A, int F, Uint32_t Data, int *Q, int *X);
+short CAMAC_read(usb_dev_handle *hdev, int N, int A, int F, Uint32_t *Data, int *Q, int *X);
+short CAMAC_Z(usb_dev_handle *hdev);
+short CAMAC_C(usb_dev_handle *hdev);
+short CAMAC_I(usb_dev_handle *hdev, int inhibit);
+
/petdaqfmf/libxxusb.h
Property changes:
Added: svn:executable
Index: petdaqfmf/daq.C
===================================================================
--- petdaqfmf/daq.C (nonexistent)
+++ petdaqfmf/daq.C (revision 112)
@@ -0,0 +1,583 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/mman.h>
+#include <errno.h>
+#include <ctype.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/stat.h>
+#include <signal.h>
+#include <zlib.h>
+
+#include "CAENV965_DEF.h"
+#include "VmUsbStack.h"
+
+#include "vme.h"
+
+#include "daq.h"
+
+#define VERSION 1.0
+#define TIMEOUT 3
+
+
+/* VME modules */
+
+#define CAEN_V792 0x340000 // IJS V792
+#define CAEN_V792_1 0x530000 // FMF1 V792
+#define CAEN_V792_2 0x630000 // FMF2 V792
+#define CAEN_V965 0x350000 // IJS V965
+int addr[3]={CAEN_V792,CAEN_V792_1,CAEN_V965 };
+int nadc=3;
+
+int gPedestal = 255;
+
+#define BUFF_L 2048
+static int stackwrite[10000];
+static int stackdata[10000],stackdump[27000];
+
+
+/************************************************/
+int weight_while(int num)
+{
+ int i, tmp;
+
+ for ( i =0; i <num; i++ ) tmp = 0;
+ return 0;
+}
+#define WWHILE weight_while(0)
+
+#define TRUE 1
+#define FALSE 0
+
+int timer_out;
+struct sigaction oact;
+void timerast (int signumber)
+{
+ timer_out = TRUE;
+ fprintf(stderr,"TIMEOUT !!!\n");
+}
+
+void tmlnk (int tout)
+{
+ timer_out = FALSE;
+ struct sigaction act;
+ struct itimerval tdelay;
+
+ act.sa_handler = timerast;
+ sigemptyset (&act.sa_mask);
+ act.sa_flags = 0;
+
+ tdelay.it_value.tv_sec = tout / 100;
+ tdelay.it_value.tv_usec = 10000 * (tout % 100);
+ tdelay.it_interval.tv_sec = 0;
+ tdelay.it_interval.tv_usec = 0;
+
+ if (sigaction (SIGALRM, &act, &oact) < 0)
+ {
+ perror ("sigaction(tmlnk)");
+ exit (EXIT_FAILURE);
+ }
+ if (setitimer (ITIMER_REAL, &tdelay, NULL) < 0)
+ {
+ perror ("setitimer(tmlnk)");
+ exit (EXIT_FAILURE);
+ }
+}
+
+void tmulk ()
+{
+ struct itimerval tdelay;
+
+ tdelay.it_value.tv_sec = 0;
+ tdelay.it_value.tv_usec = 0;
+ tdelay.it_interval.tv_sec = 0;
+ tdelay.it_interval.tv_usec = 0;
+
+ if (setitimer (ITIMER_REAL, &tdelay, NULL) < 0)
+ {
+ perror ("setitimer(tmulk)");
+ exit (EXIT_FAILURE);
+ }
+ if (sigaction (SIGALRM, &oact, NULL) < 0)
+ {
+ perror ("sigaction(tmulk)");
+ exit (EXIT_FAILURE);
+ }
+}
+
+int fexist( char * path){
+ struct stat sbuf;
+ int res;
+ if(!path || !*path) return 0;
+ res=stat(path,&sbuf);
+ if (res){
+ if (errno==ENOENT) {
+ return 0;
+ } else {
+ return -1;
+ }
+ }
+ return 1;
+}
+
+
+
+
+int daq::init(){
+
+ xxusb_register_write(udev,1,0x0); // Stop DAQ mode
+ while (xxusb_usbfifo_read(udev,(int *) stackdump,BUFF_L,100)>0);
+
+
+ int rate=1000;
+ int i=80000000/rate-40; // 80 MHz
+ if (i<72) i=72;
+ // Set DGG channel A as a pulser, output on O1,
+ // with delay =500 x 12.5ns,
+ // and width = 500 x 12.5ns,
+ // not latching or inverting
+ // VME_DGG(udev,0,6,0,24000,6000,0,0);
+ VME_DGG(udev,0,6,0,i,40,0,0);
+ // Set DGG channel B to trigger on NIM1, output on O2,
+ // with delay =200 x 12.5ns,
+ // and width = 200 x 12.5ns,
+ // not latching or inverting
+ VME_DGG(udev,1,1,1,0,10,0,1);
+
+
+// INIT stackdata
+ int fPedestal=gPedestal;
+ printf("CAEN V965 Pedestal set to %d\n", fPedestal);
+ if (fInit != NULL ) delete fInit;
+ fInit=new VmUsbStack();
+
+ for (int i=0;i<nadc;i++){
+ fInit->WriteA24D16( addr[i] + CAENV965_CRN , 0x0);
+ fInit->WriteA24D16( addr[i] + CAENV965_GEO , i);
+ fInit->ReadA24D16(addr[i] + CAENV965_GEO);
+ for (int j=0;j<32;j++){
+ fInit->WriteA24D16(addr[i] + CAENV965_THM + 0x02*j, fThreshold[j+i*32]); // threshold/kill for 32 channels
+ }
+ fInit->WriteA24D16( addr[i] + CAENV965_BS1, 0x80 ); // soft reset
+ fInit->WriteA24D16( addr[i] + CAENV965_BC1, 0x80 ); // soft reset
+ fInit->WriteA24D16( addr[i] + CAENV965_PED, fPedestal ); // pedestal
+ fInit->WriteA24D16( addr[i] + CAENV965_BS2,0x5000);
+ fInit->WriteA24D16( addr[i] + CAENV965_BS2,0x4); // clear module
+ fInit->WriteA24D16( addr[i] + CAENV965_BC2,0x4);
+ }
+ fInit->Marker(0xFAFC);
+
+// fInit->Print();
+
+
+ // READOUT stackdata
+ if (fStack != NULL ) delete fStack;
+ fStack=new VmUsbStack();
+ fStack->Marker(0xFFAB);
+ //fStack->ConditionalRead(addr[i] + CAENV965_SR1,0x1); // TRG wait : loop until bit 0 is on
+ // fStack->RepeatRead( CMD_A24, CMD_D32, addr[i] + CAENV965_OB,34,0); // repead read
+ //fStack->ConditionalRead(addr[i] + CAENV965_OB ,0x4000000) ; // loop until bit 26 is on, read data
+ for (int j=0;j<36;j++) fStack->ReadA24D32(addr[0] + CAENV965_OB);
+ for (int j=0;j<36;j++) fStack->ReadA24D32(addr[1] + CAENV965_OB);
+ for (int j=0;j<8;j++) fStack->ReadA24D32(addr[2] + CAENV965_OB);// 4 channels connected
+ fStack->Marker(0xFAFB);
+
+ for (int i=0;i<nadc;i++){
+ fStack->WriteA24D16(addr[i] + CAENV965_BS2,0x4); // clear module
+ fStack->WriteA24D16(addr[i] + CAENV965_BC2,0x4);
+ }
+
+ //fStack->Print();
+
+ VME_LED_settings(udev, 0,0,0,0); // Set Yellow LED to light with with USB out buffer not empty
+ VME_LED_settings(udev, 1,1,0,0); // Set Red LED to light with NIM1
+ VME_LED_settings(udev,2,0,0,0); // Set Green LED to light when stack is not empty
+
+ Uint32_t vmereg;
+ VME_register_read(udev,0x00,&vmereg);
+ printf("VMUSB Firmware ID -> 0x%08X\n",vmereg);
+
+ VME_register_read(udev,0x04,&vmereg);
+ printf("VMUSB Global Mode -> 0x%08X\n",vmereg);
+
+ vmereg=(vmereg&0xF000)|0x0004;
+ VME_register_write(udev,0x04,vmereg);
+ VME_register_write(udev,0x08,0x00000080);
+ VME_register_write(udev,0x28,0x0);
+ VME_register_write(udev,0x2C,0x0);
+ VME_register_write(udev,0x30,0x0);
+ VME_register_write(udev,0x34,0x0);
+ VME_register_write(udev,0x3C,0x000);
+
+ int nb = fInit->Get(10000,stackdata);
+ int ret= xxusb_stack_execute(udev,(Uint32_t *)stackdata);
+ printf("Init::%d ret=%d\n",nb,ret);
+ if (ret>0) for (int i=0;i<ret/2;i++) printf ("stackdata=0x%08X\n",stackdata[i]);
+
+ int nb0= fStack->Get(10000,&stackwrite[0]);
+ if (nb0>768) {
+ fprintf(stderr,"nb0=%d > 768 error xxusb_stack_write\n", nb0);
+ exit(-1);
+ }
+ nb =xxusb_stack_write(udev,0x2,(Uint32_t *) stackwrite);
+ nb0=xxusb_stack_read(udev,0x2,(Uint32_t *) stackdata);
+ for (int i=0;i<stackwrite[0]+1;i++){
+ if (stackdata[i]!=stackwrite[i]) printf("%d %d init err %x %x\n",nb,nb0,stackwrite[i], stackdata[i]);
+ }
+
+ if (fMode==2) xxusb_register_write(udev,1,0x1); // Start DAQ mode
+
+ printf("daq::init() \n");
+ return 0;
+}
+
+int daq::connect(){
+ VME_START(NULL);
+ printf("daq::connect()\n");
+ return 0;
+}
+
+int daq::disconnect(){
+ /* zakljuci */
+ VME_STOP();
+ printf("daq::disconnect()\n");
+ return 0;
+}
+
+int daq:: clear(){
+ return 0;
+}
+
+inline int module_header(int recid,Uint32_t *data,int len){
+ data[0] = recid;
+ data[1] = (len >0)? len : 0 ;
+ return data[1]+2;
+}
+
+
+int daq::event(unsigned int *data, int maxn, int *ctr, int print){
+ int tout=200; /* 1/100 of a second */
+ const int lsize=sizeof(unsigned Uint32_t);
+
+
+ ctr[0]++;
+ ctr[1]++;
+
+ int count=0;
+
+ switch (fMode){
+ case 0:// normal calls
+ {
+ unsigned short clr= 0x4;
+ unsigned int status=0;
+ Uint32_t mdata;
+
+ for (int i=0;i<2;i++){
+ // wait for trg
+ tmlnk (tout);
+ do VME_A24D16_R( addr[i] + CAENV965_SR1, &status); while ( (status&0x1)==0 && timer_out==0 );
+ tmulk();
+ // readout data
+ if (timer_out) return 0;
+ int len=0;
+
+ do {
+ VME_A24D32_R(addr[i] + CAENV965_OB, &mdata);
+ mdata=data[count++];
+ len++;
+ } while ( (mdata & 0x4000000)==0 && timer_out==0) ; // bit 26 EOB or not valid datum
+ // clear
+ VME_A24D16_W( addr[i] + CAENV965_BS2, &clr);
+ VME_A24D16_W( addr[i] + CAENV965_BC2, &clr);
+
+ if (count+2<maxn) {
+ if (print) printf("V965 %3d\n",len);
+ count+=module_header(0x130+i,&data[count],len);
+ ctr[2]++;
+ ctr[3]+=len;
+ }
+
+ timer_out=0;
+ }
+ }
+ break;
+ case 1:// stack execute
+ {
+ fStack->Get(10000,(int *)data);
+ int ret=xxusb_stack_execute(udev,(Uint32_t *) data); //The first element of the array is the number of bytes.
+ if (ret< 0 ) {
+ printf ("xxusb_stack_execute error err=%d\n",ret); \
+ count = 0;
+ } else count= ret/lsize;
+
+ }
+ break;
+ case 2:// stack load
+ {
+ int ret=xxusb_usbfifo_read(udev,(int *) data,BUFF_L,100);
+ if (ret< 0 ) {
+ if (ret!=-110) {
+ printf ("xxusb_usbfifo_read error err=%d\n",ret);
+ end();
+ init();
+ }
+ count = 0;
+ } else {
+ if (0 && print && ret>0) {
+ for (int i=0;i<100;i++) {
+ printf ("%4d fifodata=0x%08X\n",i, data[i]);
+ if (data[i]==0xFAFB) break;
+ }
+ /*
+
+ 0 fifodata=0x0000000D
+ 1 fifodata=0x00000049
+ 2 fifodata=0x0000FFAB
+ 3 fifodata=0x00002000
+ 4 fifodata=0x00000200
+ 5 fifodata=0x00004141
+ 6 fifodata=0x00000000
+ 7 fifodata=0x00004057
+ 8 fifodata=0x00000010
+ 9 fifodata=0x00004052
+ 10 fifodata=0x00000001
+ 11 fifodata=0x0000405C
+ 12 fifodata=0x00000011
+ 13 fifodata=0x0000405D
+ 14 fifodata=0x00000002
+ 15 fifodata=0x0000405E
+ 16 fifodata=0x00000012
+ 17 fifodata=0x0000401C
+ 18 fifodata=0x00000003
+ 19 fifodata=0x0000402F
+ 20 fifodata=0x00000013
+ 21 fifodata=0x00004024
+ 22 fifodata=0x00000004
+ 23 fifodata=0x00004076
+ 24 fifodata=0x00000014
+ 25 fifodata=0x0000412F
+ 26 fifodata=0x00000005
+ 27 fifodata=0x0000404C
+ 28 fifodata=0x00000015
+ 29 fifodata=0x00004132
+ 30 fifodata=0x00000006
+ 31 fifodata=0x00004044
+ 32 fifodata=0x00000016
+ 33 fifodata=0x0000404A
+ 34 fifodata=0x00000007
+ 35 fifodata=0x0000409B
+ 36 fifodata=0x00000017
+ 37 fifodata=0x000040F1
+ 38 fifodata=0x00000008
+ 39 fifodata=0x00004087
+ 40 fifodata=0x00000018
+ 41 fifodata=0x00004173
+ 42 fifodata=0x00000009
+ 43 fifodata=0x0000404C
+ 44 fifodata=0x00000019
+ 45 fifodata=0x0000406C
+ 46 fifodata=0x0000000A
+ 47 fifodata=0x00004070
+ 48 fifodata=0x0000001A
+ 49 fifodata=0x0000406E
+ 50 fifodata=0x0000000B
+ 51 fifodata=0x00004014
+ 52 fifodata=0x0000001B
+ 53 fifodata=0x000040B7
+ 54 fifodata=0x0000000C
+ 55 fifodata=0x000040A9
+ 56 fifodata=0x0000001C
+ 57 fifodata=0x00004048
+ 58 fifodata=0x0000000D
+ 59 fifodata=0x00004118
+ 60 fifodata=0x0000001D
+ 61 fifodata=0x0000409D
+ 62 fifodata=0x0000000E
+ 63 fifodata=0x0000405B
+ 64 fifodata=0x0000001E
+ 65 fifodata=0x00004285
+ 66 fifodata=0x0000000F
+ 67 fifodata=0x00004159
+ 68 fifodata=0x0000001F
+ 69 fifodata=0x00000035
+ 70 fifodata=0x00000400
+ 71 fifodata=0x00000035
+ 72 fifodata=0x00000600
+ 73 fifodata=0x00000035
+ 74 fifodata=0x0000FAFB
+
+
+ */
+ }
+ if (print) printf("------------------ret=%d data[0]=%d\n",ret,(int)data[0]);
+ count= ret/lsize;
+ ctr[2]+=data[0];
+ ctr[3]+=count;
+ }
+ }
+ break;
+ }
+ return count*lsize;
+}
+
+int daq::end(){
+
+ xxusb_register_write(udev,1,0x0); // Stop DAQ mode
+ while (xxusb_usbfifo_read(udev,(int *) stackdata,BUFF_L,30)>0);
+ printf("daq::end()\n");
+ return 0;
+}
+
+daq::daq(){
+ fMode = 2;
+ fPedestal=255;
+ for (int i=0;i<128;i++){
+ if (i<72) fThreshold.push_back(0);
+ else fThreshold.push_back(0x1<<8); // samo 4 kanali na zadnjem modulu so enablani
+ }
+ fThresholdEnable=0;
+ fStop=0;
+ fInit=NULL;
+ fStack=NULL;
+ connect();
+}
+
+daq::~daq(){
+disconnect();
+}
+
+#ifdef MAIN
+/* ------------------- CatchSig ----------------- */
+int ctrlcflag=0;
+
+void SigInt (int sig)
+{
+ ctrlcflag = 1;
+ timer_out=1;
+}
+
+int main (int argc, char **argv){
+ // intercept routine
+ if (signal (SIGINT, SigInt) == SIG_ERR) {
+ perror ("sigignore");
+ }
+
+ // print welcome message
+ time_t t,told, tstart, tstop;
+ time(&t);
+ fprintf(stdout,"#############################################\n");
+ fprintf(stdout,"Program %s version %2.1f\n",argv[0], VERSION);
+ fprintf(stdout,"Compiled on %s %s\n",__DATE__, __TIME__);
+ fprintf(stdout,"Runtime %s \n",ctime(&t));
+ fprintf(stdout,"#############################################\n");
+
+
+ int neve=-1;
+ char cfname[100]="test.dat";
+ char *fname=cfname;
+ char *fpedname=NULL;
+
+#define BSIZE 10000
+ Uint32_t data[10000];
+
+
+ daq *d= new daq();
+ int c;
+
+ while ((c = getopt (argc, argv, "p:n:t:o:")) != -1)
+ switch (c)
+ {
+ case 'o':
+ sprintf(fname ,"%s", optarg);
+ if (fexist(fname)==1){
+ fprintf(stdout,"Error !\n");
+ fprintf(stdout,"File %s already exist. Appending ....\n",fname);
+ //fprintf(stdout,"Remove the file and restart !!!\n");
+ //exit(0);
+ }
+ break; // input file
+ case 'n':
+ neve = atoi(optarg); // negative argument time ( in s )limited event loop
+ break;
+ case 't':
+ {
+
+ sprintf(fpedname ,"%s", optarg);
+ FILE *fped=fopen(fpedname,"r");
+ int j=0;
+ int ndim=400;
+ char line[ndim];
+ int val=0;
+ while (fgets(line,ndim,fped)!=NULL){
+ sscanf(line,"%d",&val);
+ d->fThreshold[j++]=val;
+ }
+ d->fThresholdEnable=1;
+ //fclose(fped);
+ fclose(fped);
+ break;
+ }
+ case 'p':
+ gPedestal = atoi(optarg); // injected charge to the qdc
+ break;
+ }
+
+ if (argc==1) {
+ fprintf(stdout,"Usage: %s -o [filename] -n [number of events] -t [thresholdfile] -p <qdc inject charge>\n negative number of events = acq time in seconds\n",argv[0]);
+ exit(-1);
+ }
+ //FILE *fp=fopen(fname,"a");
+ gzFile fp=gzopen(fname,"a");
+
+ d->init();
+ d->clear();
+
+ int hdr[4]={2}; // recid od run 11 naprej
+ int i=0;
+ int ntotal=0;
+ int counters[30]={0,0,0,0,0, 0,0,0,0,0,0,0};
+ char names[10][20]={"TRG","CAEN V965"};
+ time(&t);
+ tstart=t;
+ tstop=tstart+360000;
+ if (neve<-1) {
+ tstop=tstart-neve;
+ neve=-1;
+ }
+ for (i=0;i!=neve && !ctrlcflag && t<tstop;i++){
+ time(&t);
+ if (t!=told ) printf("%d in %2.2f min daq::event() %s\n",i, (double)(t-tstart)/60., ctime(&t));
+ int nb=d->event(data,BSIZE, counters,t!=told);
+ if (nb>0){
+ // zapis v datoteko
+ hdr[1]=nb+4*sizeof(int);
+ hdr[2]=time(NULL);
+ hdr[3]=i;
+
+ //fwrite(hdr, sizeof(int),4 , fp);
+ gzwrite(fp, hdr, sizeof(int)*4); //gzip
+ // recid=1 do runa 10. ntotal += fwrite(data, sizeof(int),nb, fp);
+ //ntotal += fwrite(data, 1,nb, fp);
+ ntotal += gzwrite(fp, data, nb);
+ told=t;
+ } else i--;
+ }
+
+ d->end();
+ delete d;
+ printf("Number of Events: %d\n",i);
+ if (ctrlcflag) printf("User Program termination CTRL-C\n");
+ if (t>tstop ) printf("Timeout termination tstart# t>tstop: %d# %d >%d\n",(int)t, (int)tstart, (int) tstop);
+
+
+ //fclose(fp);
+ gzclose(fp);
+ fprintf(stdout,"%d bytes written to %s\nCounts:\n", (int) (ntotal*sizeof(int)),fname);
+ for (i=0;i<2;i++) fprintf(stdout,"%s\t%d\t%d\n",names[i],counters[2*i],counters[2*i+1]) ;
+
+
+ return 0;
+}
+#endif
Index: petdaqfmf/.root_hist
===================================================================
--- petdaqfmf/.root_hist (nonexistent)
+++ petdaqfmf/.root_hist (revision 112)
@@ -0,0 +1,99 @@
+TBrowser tt
+.q
+TBrowser d
+TFile *_file0 = TFile::Open("test100.root")
+ach0->Draw()
+.q
+TFile *_file0 = TFile::Open("test50.root")
+ach0->Draw()
+.q
+TFile *_file0 = TFile::Open("test150.root")
+ach0->Draw()
+TFile *_file0 = TFile::Open("test250.root")
+ach0->Draw()
+TFile *_file0 = TFile::Open("test200.root")
+ach0->Draw()
+TFile *_file0 = TFile::Open("test150.root")
+ach0->Draw()
+TFile *_file0 = TFile::Open("test100.root")
+ach0->Draw()
+TFile *_file0 = TFile::Open("test50.root")
+ach0->Draw()
+.q
+TFile *_file0 = TFile::Open("test80.root")
+ach0->Draw()
+ach0->Draw()
+ach1->Draw()
+ach2->Draw()
+ach3->Draw()
+ach4->Draw()
+ach5->Draw()
+ach6->Draw()
+ach7->Draw()
+ach8->Draw()
+ach9->Draw()
+ach10->Draw()
+ach11->Draw()
+ach12->Draw()
+ach13->Draw()
+ach14->Draw()
+ach15->Draw()
+ach16->Draw()
+ach15->Draw()
+.q
+TFile *_file0 = TFile::Open("test80_reversed.root")
+ach15->Draw()
+ach1->Draw()
+ach2->Draw()
+ach3->Draw()
+ach4->Draw()
+ach4->Draw()
+.q
+TFile *_file0 = TFile::Open("test.root")
+ach4->Draw()
+1->Draw()
+a1->Draw()
+ach5->Draw()
+ach5->Draw()
+ach7->Draw()
+ach16->Draw()
+ach18->Draw()
+ach36->Draw()
+.q
+TFile *_file0 = TFile::Open("test1.root")
+ach7->Draw()
+ach17->Draw()
+ach7->Draw()
+.q
+TFile *_file0 = TFile::Open("test.root")
+ach7->Draw()
+ach27->Draw()
+ach17->Draw()
+ach18->Draw()
+ach16->Draw()
+ach15->Draw()
+ach14->Draw()
+ach13->Draw()
+.ls
+sumadc1->Draw()
+sumadc0->Draw()
+cadc0->Draw()
+pmt0->Draw()
+pmt1->Draw()
+pmt0->Draw()
+sumadc0->Draw()
+.q
+TFile *_file0 = TFile::Open("test_reversed.root")
+sumadc0->Draw()
+tbrowser
+TBrowser
+TBrowser jj
+.q
+TFile *_file0 = TFile::Open("test850.root")
+ach14->Draw()
+ach11->Draw()
+ach0->Draw()
+ach15->Draw()
+ach16->Draw()
+ach15->Draw()
+.q
Index: petdaqfmf/wienvme_dll.h
===================================================================
--- petdaqfmf/wienvme_dll.h (nonexistent)
+++ petdaqfmf/wienvme_dll.h (revision 112)
@@ -0,0 +1,53 @@
+#ifndef _WIENVME_DLL_H
+#define _WIENVME_DLL_H
+
+#include "libxxusb.h"
+
+extern usb_dev_handle *udev;
+
+
+
+int VME_start (char*);
+int VME_close (int);
+int VME_stop (void);
+int VME_reset (void);
+
+
+int VME_read16 (Uint32_t, void*);
+int VME_read32 (Uint32_t, void*);
+
+int VME_write16 ( Uint32_t, void*);
+int VME_write32 ( Uint32_t, void*);
+
+#define VME_START(NODE) VME_start((NODE))
+#define VME_STOP() VME_stop()
+#define VME_RESET() VME_reset()
+
+#define VME_A24D16_R(VME,DATA) VME_read16( (VME), (DATA))
+#define VME_A24D32_R(VME,DATA) VME_read32( (VME), (DATA))
+
+#define VME_A24D16_W(VME,DATA) VME_write16( (VME), (DATA))
+#define VME_A24D32_W(VME,DATA) VME_write32( (VME), (DATA))
+
+#define VME_A32D16_R(VME,DATA) VME_read16( (VME), (DATA))
+#define VME_A32D32_R(VME,DATA) VME_read32( (VME), (DATA))
+
+#define VME_A32D16_W(VME,DATA) VME_write16( (VME), (DATA))
+#define VME_A32D32_W(VME,DATA) VME_write32( (VME), (DATA))
+
+typedef unsigned short ADDRESS_MODIFIER;
+
+#define Std_Sup_Data (ADDRESS_MODIFIER)0x3d
+#define Std_Sup_Prog (ADDRESS_MODIFIER)0x3e
+#define Std_NoPriv_Data (ADDRESS_MODIFIER)0x39
+#define Std_NoPriv_Prog (ADDRESS_MODIFIER)0x3a
+
+#define Short_Sup (ADDRESS_MODIFIER)0x2d
+#define Short_NoPriv (ADDRESS_MODIFIER)0x29
+
+#define Ext_Sup_Data (ADDRESS_MODIFIER)0x0d
+#define Ext_Sup_Prog (ADDRESS_MODIFIER)0x0e
+#define Ext_NoPriv_Data (ADDRESS_MODIFIER)0x09
+#define Ext_NoPriv_Prog (ADDRESS_MODIFIER)0x0a
+
+#endif
/petdaqfmf/wienvme_dll.h
Property changes:
Added: svn:executable
Index: petdaqfmf/VMEModule.hh
===================================================================
--- petdaqfmf/VMEModule.hh (nonexistent)
+++ petdaqfmf/VMEModule.hh (revision 112)
@@ -0,0 +1,39 @@
+/********************\
+ VMEModule.hh
+
+ update: 04/01/28
+
+\********************/
+
+#ifndef VMEMODULE_HH
+#define VMEMODULE_HH
+
+
+
+#include <stdio.h>
+#include <sys/types.h>
+#include "pcivme_ni.h"
+
+#define VMEA24 (unsigned short)0x39
+#define VMEA32 (unsigned short)0x09
+#define VMEA16 (unsigned short)0x29
+class VMEModule {
+protected:
+ int m_fd;
+ int m_vmeptr;
+ caddr_t m_vmeaddr;
+ size_t m_size;
+ unsigned long m_baseaddress;
+public:
+ VMEModule(int device, caddr_t vmeaddr, size_t size);
+ ~VMEModule();
+ unsigned long getBaseAddress() { return (unsigned long) m_baseaddress; }
+ caddr_t getVmeAddress() { return m_vmeaddr; }
+ void write32(unsigned long address, unsigned long value);
+ unsigned long read32(unsigned long address);
+
+ void write16(unsigned long address, unsigned short value);
+ unsigned short read16(unsigned long address);
+};
+
+#endif
Index: petdaqfmf/daq.h
===================================================================
--- petdaqfmf/daq.h (nonexistent)
+++ petdaqfmf/daq.h (revision 112)
@@ -0,0 +1,24 @@
+#ifndef _daq_h_
+#define _daq_h_
+#include <vector>
+class VmUsbStack;
+class daq {
+public:
+ VmUsbStack * fStack;
+ VmUsbStack * fInit;
+ int fPedestal;
+ int fThresholdEnable;
+ std::vector<int> fThreshold;
+ int fStop;
+ int fMode;
+ int clear();
+ int end();
+ int event(unsigned int *, int,int*, int );
+ int init();
+ int connect();
+ int disconnect();
+ daq();
+ ~daq();
+};
+
+#endif
Index: petdaqfmf/README
===================================================================
--- petdaqfmf/README (nonexistent)
+++ petdaqfmf/README (revision 112)
@@ -0,0 +1,2 @@
+./daq -o [filename] -n [number of events] -t [thresholdfile] -p <qdc inject charge>
+ negative number of events = acq time in seconds
Index: petdaqfmf/pcivme_ni.h
===================================================================
--- petdaqfmf/pcivme_ni.h (nonexistent)
+++ petdaqfmf/pcivme_ni.h (revision 112)
@@ -0,0 +1,84 @@
+#ifndef __PCIVME_NI_H__
+#define __PCIVME_NI_H__
+
+//-------------------------------------------------------------------------------------------
+// pcivme_ni.h - header for ni-labview shared library or dll for ARW pcivme interface
+// this library can also be used for other purposes aside from labview
+//
+// Copyright (C) 2002-2004 ARW Elektronik Germany
+//
+// this source code is published under LGPL (Open Source). You can use, redistrubute and
+// modify it unless this header is not modified or deleted. No warranty is given that
+// this software will work like expected.
+// This product is not authorized for use as critical component in life support systems
+// wihout the express written approval of ARW Elektronik Germany.
+//
+// Please announce changes and hints to ARW Elektronik
+//
+// $Log: pcivme_ni.h,v $
+// Revision 1.8 2004/08/13 19:23:45 klaus
+// conversion to kernel-version 2.6, released version 3.0
+//
+// Revision 1.7 2002/10/20 18:07:18 klaus
+// changed error handling
+//
+// Revision 1.6 2002/10/18 21:56:28 klaus
+// completed functional features, untested
+//
+// Revision 1.5 2002/10/18 21:56:28 klaus
+// completed functional features, untested
+//
+// Revision 1.4 2002/10/17 21:16:03 klaus
+// filled function bodies
+//
+// Revision 1.3 2002/10/17 21:16:03 klaus
+// filled function bodies
+//
+// Revision 1.2 2002/10/17 19:05:03 klaus
+// VME access is working through test to lib to driver
+//
+// Revision 1.1 2002/10/12 22:04:44 klaus
+// first work done
+//
+// what who when
+// first steps AR 17.11.1999
+// VMEerror new AR 07.01.2000
+// made LINUX shared library from windows template AR 12.10.2002
+//
+
+//-------------------------------------------------------------------------------------------
+// INCLUDES
+//
+#define BOOLEAN int
+#if !defined(TRUE) && !defined(FALSE)
+ #define FALSE 0
+ #define TRUE 1
+#endif
+
+//-------------------------------------------------------------------------------------------
+// PROTOTYPES
+//
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+int VMEopen(const char *cszDeviceName, unsigned char ubAddressModifier, int *pnHandle);
+int VMEinit(const char *cszDeviceName, unsigned short nVMEMM, unsigned char ubAddressModifier, int *pnHandle);
+int setAccessProperties(int nHandle, unsigned char bModifier, unsigned char bAccessType);
+int VMEread(int nHandle, unsigned long ulAddress, unsigned char ubAccessWidth, unsigned long ulElementCount, void *pvBuffer);
+int VMEwrite(int nHandle, unsigned long ulAddress, unsigned char ubAccessWidth, unsigned long ulElementCount, void *pvBuffer);
+int VMEaccessVIC(int nHandle, unsigned char ubAccessMode, unsigned short uwAddress, unsigned char *ubContent);
+int VMEreset(int nHandle);
+int VMETAS(int nHandle, unsigned long ulAddress, unsigned char *ubResult);
+int VMEcontrolInterrupt(int nHandle, BOOLEAN *bEnable);
+int VMEinterrupt(int nHandle, unsigned char *ubVector);
+int VMEsysfailGet(int nHandle, BOOLEAN *bResult);
+int VMEsysfailSet(int nHandle, BOOLEAN bForce);
+int VMEerror(int nHandle);
+int VMEclose(int nHandle);
+int GetLastError(int nHandle);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __PCIVME_NI_H__ */
Index: petdaqfmf/wienvmeusb_dll.c
===================================================================
--- petdaqfmf/wienvmeusb_dll.c (nonexistent)
+++ petdaqfmf/wienvmeusb_dll.c (revision 112)
@@ -0,0 +1,98 @@
+#include <stdlib.h>
+#include <stdio.h>
+#include "pcivme_ni.h"
+#include "wienvme_dll.h"
+//----------- DEFINES -----------------------------------------------------
+#define DEVICENAME_LINUX "/dev/vmemm_1" // a device name 'template' for WINNT
+
+usb_dev_handle *udev;
+
+
+
+
+int VME_start (char* serial)
+{
+
+ char serial_default[100];
+ sprintf(serial_default, "VM0120");
+ if (serial != NULL)
+ udev = xxusb_serial_open(serial);
+ else
+ udev = xxusb_serial_open(serial_default);
+ printf(" VME_start %s--->udev!=NULL ==>%d\n", serial, udev!=NULL);
+ if (!udev) {
+ printf(" Check usb udev permissions and restart! Exiting .....\n", serial, udev!=NULL);
+ exit(-1);
+ }
+ return 0;
+}
+
+
+
+int VME_stop ()
+{
+ if (udev) xxusb_device_close(udev);
+
+
+ return 0;
+}
+
+short Address_Modifier= Std_NoPriv_Data;
+
+int VME_read16 (Uint32_t at, void* buff)
+{
+ int result;
+
+/* D16 read */
+
+ result = VME_read_16(udev, Address_Modifier, at , (Uint32_t *) buff);
+ if (result <0) {
+ printf("D16 read at 0x%X failed! err=%d\n", at,result);
+ }
+// printf("0x%X, 0x%X, 0x%X, 0x%X\n", hHandle, at, n, * (unsigned short *) buff);
+ return (result);
+}
+
+int VME_read32 (Uint32_t at, void* buff)
+{
+ int result;
+
+/* D32 read */
+
+ result = VME_read_32(udev, Address_Modifier, at , (Uint32_t *) buff);
+ if (result < 0) {
+ printf("D32 read at 0x%X failed err=%d!\n", at,result);
+ }
+ //printf("0x%X, 0x%X, 0x%X, 0x%X\n", hHandle, at, n, * (unsigned short *) buff);
+ return (result);
+}
+
+int VME_write16 (Uint32_t at, void* buff)
+{
+ int result;
+ Uint32_t data= *((short *)buff);
+
+/* D16 write */
+
+ result = VME_write_16(udev, Address_Modifier, at, data );
+ if (result<0) {
+ printf("D16 write at 0x%X failed! err=%d\n", at,result);
+ }
+ return (result);
+}
+
+int VME_write32 ( Uint32_t at, void* buff)
+{
+ int result;
+ Uint32_t data= *((Uint32_t *)buff);
+
+/* D32 write */
+
+ result = VME_write_32(udev, Address_Modifier, at, data );
+
+ if (result<0) {
+ printf("D32 write at 0x%X failed! err=%d\n", at,result);
+ }
+ //printf("D32 write at 0x%lX buff=0x%X\n", at,((int*) buff)[0]);
+ return (result);
+}
/petdaqfmf/wienvmeusb_dll.c
Property changes:
Added: svn:executable
Index: petdaqfmf/LinkDef.h
===================================================================
--- petdaqfmf/LinkDef.h (nonexistent)
+++ petdaqfmf/LinkDef.h (revision 112)
@@ -0,0 +1,10 @@
+#ifdef __CINT__
+
+#pragma link off all globals;
+#pragma link off all classes;
+#pragma link off all functions;
+
+#pragma link C++ class daq;
+
+#endif
+
Index: petdaqfmf/VmUsbStack.C
===================================================================
--- petdaqfmf/VmUsbStack.C (nonexistent)
+++ petdaqfmf/VmUsbStack.C (revision 112)
@@ -0,0 +1,124 @@
+#include <stdio.h>
+#include <vector>
+#include "VmUsbStack.h"
+
+VmUsbStack::VmUsbStack(){
+ fStack.push_back(0x1);
+ fStack.push_back(0x0);
+}
+
+VmUsbStack::~VmUsbStack(){
+ fStack.clear();
+}
+
+int VmUsbStack::Get(int maxn, int *stack){
+ for (int i=0;i<fStack.size();i++){
+ if (i<maxn) stack[i]=fStack[i]; else return -1;
+ }
+ return fStack[0];
+}
+
+
+void VmUsbStack::Append(int cmd, int addr ){
+ fStack.push_back(cmd & 0xFFFF);
+ fStack.push_back(cmd >> 16);
+ fStack.push_back(addr&0xFFFF);
+ fStack.push_back((addr >> 16)& 0xFFFF);
+ fStack[0]=fStack.size()-1;
+}
+
+void VmUsbStack::Append(int cmd, int addr , int data){
+ Append( cmd, addr );
+ fStack.push_back(data&0xFFFF);
+ fStack.push_back((data >> 16)&0xFFFF);
+ fStack[0] = fStack.size()-1;
+}
+
+void VmUsbStack::ReadA24D16(int addr ){
+ Append(CMD_READ | CMD_A24 , CMD_D16 | addr);
+}
+
+void VmUsbStack::WriteA24D16(int addr, int data){
+ return Append(CMD_WRITE | CMD_A24,CMD_D16 | addr, data);
+}
+
+void VmUsbStack::ReadA24D32(int addr ){
+ Append(CMD_READ | CMD_A24 , CMD_D32 | addr);
+}
+
+void VmUsbStack::WriteA24D32(int addr, int data){
+ return Append(CMD_WRITE | CMD_A24 , CMD_D32 | addr, data);
+}
+
+void VmUsbStack::ReadA32D16(int addr ){
+ Append(CMD_READ | CMD_A32 , CMD_D16| addr);
+}
+
+void VmUsbStack::WriteA32D16(int addr, int data){
+ return Append(CMD_WRITE | CMD_A32 , CMD_D16 | addr, data);
+}
+
+void VmUsbStack::ReadA32D32(int addr ){
+ Append(CMD_READ | CMD_A32 , CMD_D32 | addr);
+}
+
+void VmUsbStack::WriteA32D32(int addr, int data){
+ return Append(CMD_WRITE | CMD_A32 , CMD_D32| addr, data);
+}
+
+
+void VmUsbStack::Marker(int marker){
+ return Append(CMD_MRK, marker);
+}
+
+void VmUsbStack::ConditionalRead(int adr_mod,int d16d32, int addr, int bmask){
+ Append(CMD_READ| CMD_HD | adr_mod ,addr);
+ Append(CMD_READ| CMD_HD | CMD_HM |adr_mod, d16d32 |addr,bmask);
+}
+
+void VmUsbStack::RepeatRead(int adr_mod,int d16d32, int baseaddr, int n, int increment){
+ for (int i=0;i<n;i++) Append( adr_mod | CMD_READ, d16d32 +baseaddr + i*increment);
+}
+void VmUsbStack::RepeatWrite(int adr_mod,int d16d32,int baseaddr, int n, int increment, int data){
+ for (int i=0;i<n;i++) Append( adr_mod | CMD_WRITE,d16d32 + baseaddr+i*increment, data);
+}
+
+void VmUsbStack::Print(){
+ for (int i=0; i < fStack.size();i++) printf("0x%04x\n",fStack[i]);
+ printf("%d %d __________________________________\n",fStack.size(),fStack[0]);
+}
+
+#ifdef MAIN
+#include "CAENV965_DEF.h"
+#define CAEN_V965 0x340000
+
+int main(){
+// INIT stackdata
+int geo=1,fPedestal=255;
+VmUsbStack *init=new VmUsbStack();
+init->Write(CAEN_V965 + CAENV965_CRN, 0x0);
+init->Write(CAEN_V965 + CAENV965_GEO, geo);
+init->RepeatWrite( CAEN_V965 + CAENV965_THM, 32, 0x02,0x0); // threshold/kill for 32 channels, 2*i addr increment
+init->Write( CAEN_V965 + CAENV965_BS1, 0x80 ); // soft reset
+init->Write( CAEN_V965 + CAENV965_BC1, 0x80 ); // soft reset
+init->Write( CAEN_V965 + CAENV965_PED, fPedestal ); // pedestal
+init->Write(CAEN_V965 + CAENV965_BS2,0x5000);
+init->Write(CAEN_V965 + CAENV965_BS2,0x4); // clear module
+init->Write(CAEN_V965 + CAENV965_BC2,0x4);
+init->Print();
+
+// READOUT stackdata
+VmUsbStack *stack=new VmUsbStack();
+stack->Write(CAEN_V965 + CAENV965_BS2,0x4); // clear module
+stack->Write(CAEN_V965 + CAENV965_BC2,0x4);
+stack->ConditionalRead(CAEN_V965 + CAENV965_SR1,0x1); // TRG wait : loop until bit 0 is on
+stack->ConditionalRead(CAEN_V965 + CAENV965_OB ,0x4000000) ; // loop until bit 26 is on, read data
+stack->Marker(0xFAFB);
+stack->Print();
+
+ int st[1000];
+ int nb= stack->Get(1000,st);
+ for (int i=0;i<nb;i++) if (st[i]!=stack->fStack[i]) printf("error i=%d 0x%04x 0x%04x \n",i,st[i],stack->fStack[i] );
+ return 0;
+}
+#endif
Index: petdaqfmf/CAENV965_DEF.h
===================================================================
--- petdaqfmf/CAENV965_DEF.h (nonexistent)
+++ petdaqfmf/CAENV965_DEF.h (revision 112)
@@ -0,0 +1,22 @@
+#ifndef _CAENV965_DEF_H
+#define _CAENV965_DEF_H
+
+#define CAENV965_OB 0x0
+#define CAENV965_FW 0x1000
+#define CAENV965_GEO 0x1002
+#define CAENV965_MCA 0x1004
+#define CAENV965_BS1 0x1006
+#define CAENV965_BC1 0x1008
+#define CAENV965_SR1 0x100E
+#define CAENV965_CR1 0x1010
+#define CAENV965_ADH 0x1012
+#define CAENV965_ADL 0x1014
+#define CAENV965_SR2 0x1022
+#define CAENV965_BS2 0x1032
+#define CAENV965_BC2 0x1034
+#define CAENV965_CRN 0x103C
+#define CAENV965_ECR 0x1040
+#define CAENV965_PED 0x1060
+#define CAENV965_THM 0x1080
+
+#endif
Index: petdaqfmf/gui.C
===================================================================
--- petdaqfmf/gui.C (nonexistent)
+++ petdaqfmf/gui.C (revision 112)
@@ -0,0 +1,455 @@
+// By ROOT version 5.17/02 on 2008-03-13 06:46:41
+
+#ifndef ROOT_TGDockableFrame
+#include "TGDockableFrame.h"
+#endif
+#ifndef ROOT_TGMenu
+#include "TGMenu.h"
+#endif
+#ifndef ROOT_TGMdiDecorFrame
+#include "TGMdiDecorFrame.h"
+#endif
+#ifndef ROOT_TG3DLine
+#include "TG3DLine.h"
+#endif
+#ifndef ROOT_TGMdiFrame
+#include "TGMdiFrame.h"
+#endif
+#ifndef ROOT_TGMdiMainFrame
+#include "TGMdiMainFrame.h"
+#endif
+#ifndef ROOT_TGuiBldHintsButton
+#include "TGuiBldHintsButton.h"
+#endif
+#ifndef ROOT_TGMdiMenu
+#include "TGMdiMenu.h"
+#endif
+#ifndef ROOT_TGListBox
+#include "TGListBox.h"
+#endif
+#ifndef ROOT_TGNumberEntry
+#include "TGNumberEntry.h"
+#endif
+#ifndef ROOT_TGScrollBar
+#include "TGScrollBar.h"
+#endif
+#ifndef ROOT_TGuiBldHintsEditor
+#include "TGuiBldHintsEditor.h"
+#endif
+#ifndef ROOT_TRootBrowser
+#include "TRootBrowser.h"
+#endif
+#ifndef ROOT_TGFrame
+#include "TGFrame.h"
+#endif
+#ifndef ROOT_TGFileDialog
+#include "TGFileDialog.h"
+#endif
+#ifndef ROOT_TGShutter
+#include "TGShutter.h"
+#endif
+#ifndef ROOT_TGButtonGroup
+#include "TGButtonGroup.h"
+#endif
+#ifndef ROOT_TGCanvas
+#include "TGCanvas.h"
+#endif
+#ifndef ROOT_TGFSContainer
+#include "TGFSContainer.h"
+#endif
+#ifndef ROOT_TGButton
+#include "TGButton.h"
+#endif
+#ifndef ROOT_TGuiBldEditor
+#include "TGuiBldEditor.h"
+#endif
+#ifndef ROOT_TGTextEdit
+#include "TGTextEdit.h"
+#endif
+#ifndef ROOT_TGFSComboBox
+#include "TGFSComboBox.h"
+#endif
+#ifndef ROOT_TGLabel
+#include "TGLabel.h"
+#endif
+#ifndef ROOT_TGView
+#include "TGView.h"
+#endif
+#ifndef ROOT_TRootGuiBuilder
+#include "TRootGuiBuilder.h"
+#endif
+#ifndef ROOT_TGTab
+#include "TGTab.h"
+#endif
+#ifndef ROOT_TGListView
+#include "TGListView.h"
+#endif
+#ifndef ROOT_TGSplitter
+#include "TGSplitter.h"
+#endif
+#ifndef ROOT_TGStatusBar
+#include "TGStatusBar.h"
+#endif
+#ifndef ROOT_TGListTree
+#include "TGListTree.h"
+#endif
+#ifndef ROOT_TGToolTip
+#include "TGToolTip.h"
+#endif
+#ifndef ROOT_TGToolBar
+#include "TGToolBar.h"
+#endif
+#ifndef ROOT_TRootEmbeddedCanvas
+#include "TRootEmbeddedCanvas.h"
+#endif
+#ifndef ROOT_TCanvas
+#include "TCanvas.h"
+#endif
+#ifndef ROOT_TGuiBldDragManager
+#include "TGuiBldDragManager.h"
+#endif
+
+#include "Riostream.h"
+#include "TApplication.h"
+#include "TROOT.h"
+#include "TSystem.h"
+#include "TGraph.h"
+#include "TH1F.h"
+#include "daq.h"
+
+TGTextButton *gTextButton[10];
+TCanvas *fCanvas;
+TGMainFrame *fMain;
+TGTextEntry *gFilename;
+TGNumberEntry *gPedestal;
+TGNumberEntry *gCh;
+TGNumberEntry *gMaxEve;
+TGNumberEntry *gNeve;
+TGTextEntry *gTimeDisplay;
+TGCheckButton *gCheckButton;
+
+
+TRootEmbeddedCanvas *gCanvas;
+#define MAXCH 32
+TH1F* gHisto[MAXCH];
+daq * gDaq;
+#define WINDOW_NAME "ADC CAEN V965"
+//----------------------------------------------------
+int UIRDimming(int state){
+ switch (state) {
+ case 0:
+ gTextButton[0]->SetEnabled(0);
+ gTextButton[1]->SetEnabled(1);
+ gTextButton[2]->SetEnabled(0);
+
+ break;
+
+ case 1:
+ gTextButton[0]->SetEnabled(0);
+ gTextButton[1]->SetEnabled(0);
+ gTextButton[2]->SetEnabled(1);
+
+ break;
+
+ case 2:
+ gTextButton[0]->SetEnabled(1);
+ gTextButton[1]->SetEnabled(1);
+ gTextButton[2]->SetEnabled(0);
+ break;
+
+ default:
+ break;
+ }
+ return 0;
+}
+
+int fDebug;
+void GetDebug(){
+ if ( gCheckButton->IsOn() ) fDebug=1;
+ else fDebug=0;
+}
+
+int GetTime(char *x){
+ int ret;
+ time_t rawtime;
+ static time_t oldtime=-1;
+ struct tm * timeinfo;
+ time ( &rawtime );
+ ret = (oldtime==rawtime);
+ timeinfo = localtime ( &rawtime );
+ sprintf(x,"%s",asctime (timeinfo));
+ int len=strlen(x);
+ if (len) x[len-1]=0;
+ return ret;
+}
+void MyTimer(){
+ char cmd[100];
+ if (!GetTime(cmd)){
+ if (gTimeDisplay) gTimeDisplay->SetText(cmd);
+ if (gCanvas){
+ gCanvas->GetCanvas()->Modified();
+ gCanvas->GetCanvas()->Update();
+ }
+ }
+}
+
+//----------------------------------------------------
+// thread function
+int gStop=0;
+#define BSIZE 10000
+unsigned long gBuf[BSIZE];
+void Run(){
+ printf("Start of Run\n" );
+
+ // odpremo datoteko za pisanje
+ int counters[10]={0,0,0,0,0, 0,0,0,0,0};
+ char names[20][20]={"CAENV 1290","CAEN V965","LC2277","LC2277","LC2277"};
+
+ char fname[128];
+ sprintf(fname,"%s.dat",gFilename->GetText());
+ FILE *fp=fopen(fname,"w");
+ int neve = (int) gMaxEve->GetNumber();
+ int hdr[4]={1};
+
+ if (gDaq) gDaq->fStop=0;
+ // zajem zeljenega kolicine podatkov
+ for (int n=0;n<neve;n++){
+ if (!gDaq) break;
+ int nb = gDaq->event(gBuf,BSIZE,counters,1);
+ if (gDaq->fStop) break;
+ // zapis v datoteko
+ hdr[1]=nb+4*sizeof(int);
+ hdr[2]=time(NULL);
+ hdr[3]=n;
+
+ fwrite(hdr, sizeof(int),4 , fp);
+ if (nb) fwrite(gBuf, 1,nb, fp);
+ // napolni histograme
+ int nint= nb/4;
+
+ int ii=0;
+
+ while (ii<nint){
+
+ int recid=gBuf[ii++];
+ int len =gBuf[ii++];
+ unsigned int *dbuf= (unsigned int *)&gBuf[ii];
+ if (n%1000==0) printf("%d 0x%03x Len=%d\n",n,recid,len);
+ unsigned short edge;
+
+ if (recid==0x130){
+ for (int i=0; i<len; i++) {
+ int dtype=(dbuf[i]>>25)&0x3;
+ if (dtype==0) {
+ int ch=(dbuf[i]>>17)&0xf;
+ if (2*ch<MAXCH) {
+ int rg=(dbuf[i]>>16)&0x1;
+ int adc=dbuf[i]&0xfff;
+ gHisto[2*ch+rg]->Fill(adc);
+ // printf("V965 0x%08x nev=%4d %d. [ch=%2d] range=%d data=%d \n",dbuf[i],n,i,ch,rg,adc);
+ }
+ }
+ }
+ } // if (recid==0x130)
+ ii+=len;
+ }
+ /*
+ // decode
+
+ int nint=nb/sizeof(int);
+
+ for (int i=0;i<nint;i++){
+ unsigned short tdc = gBuf[i]&0xFFFF;
+ unsigned short ch = (gBuf[i] >> 17 ) &0x1F;
+ unsigned short edge = (gBuf[i] >> 16 ) &0x1;
+ if (edge && ch < MAXCH) gHisto[ch]->Fill(tdc);
+ if (fDebug) printf("nev=%4d %d. [ch=%2d] egde=%d data=%d",n,i,ch,edge,tdc);
+ }
+ */
+ gSystem->ProcessEvents();
+ MyTimer();
+ gNeve->SetNumber(n);
+ }
+ fclose(fp);
+ UIRDimming(2);
+ printf("End of MyThread neve=%d\n",neve);
+
+}
+
+
+int save2ascii(){
+ if (!gHisto[0]) return 0;
+ char fname[128];
+ sprintf(fname,"%s.txt",gFilename->GetText());
+ FILE *fp= fopen(fname, "w");
+ fprintf(fp, "%s\n",WINDOW_NAME);
+ char cmd[128];
+ GetTime(cmd);
+ fprintf(fp, "Shranjeno: %s\n\n", cmd );
+ fprintf(fp, "Kanal hid=") ;
+ for (int j=0;j<MAXCH;j++) fprintf(fp, "%d\t",j);
+ fprintf(fp, "\n-------------------------------------------------\n");
+ for (int i=0;i<gHisto[0]->GetNbinsX();i++){
+ fprintf(fp, "%d\t",i);
+ for (int j=0;j<MAXCH;j++) fprintf(fp, "%d\t",(int) gHisto[j]->GetBinContent(i+1));
+ fprintf(fp, "\n");
+ }
+ fclose(fp);
+ printf("Histogram content is dumped to the file %s\n",fname);
+ return 0;
+ }
+
+void MyEventHandler(int i){
+
+ UIRDimming(i);
+
+ switch (i) {
+ case 0: // Init
+ gDaq->fPedestal = (int)(gPedestal->GetNumber());
+ gDaq->init();
+ break;
+ case 1: // Start
+ Run();
+ case 2: // Stop
+ gDaq->fStop=1;
+ case 3: // ReDraw
+ gCanvas->GetCanvas()->Modified();
+ gCanvas->GetCanvas()->Update();
+ break;
+ case 4: // Clear
+ for (int j=0;j<MAXCH;j++) if (gHisto[j]) gHisto[j]->Reset();
+ break;
+ case 5: // Save
+ save2ascii();
+ break;
+ case 6: // Print
+ gCanvas->GetCanvas()->SaveAs("zivljenjski_cas_mionov.pdf");
+ break;
+ case 7: // exit
+ gApplication->Terminate(0);
+ break;
+ }
+
+}
+
+int Redraw(long val=0){
+ unsigned int ch= (unsigned int)(gCh->GetNumber());
+ if (ch<MAXCH && gHisto[ch]) {
+ gCanvas->GetCanvas()->cd();
+ gHisto[ch]->Draw();
+ gCanvas->GetCanvas()->Modified();
+ gCanvas->GetCanvas()->Update();
+ } else {
+ if (gCh->GetNumber()>=MAXCH) gCh->SetNumber(MAXCH-1);
+ if (gCh->GetNumber()< 0) gCh->SetNumber(0);
+ }
+ return 0;
+}
+//----------------------------------------------------
+
+int gui(){
+
+ for (int i=0;i<MAXCH;i++){
+ char hname[50];
+ sprintf(hname,"Ch. %d Rg.%d;ADC;N",i/2,i%2);
+ char hn[50];
+ sprintf(hn,"ch%d",i);
+ gHisto[i] = new TH1F(hn,hname,4096,-0.5,4095.5);
+ }
+ gDaq= new daq();
+ fMain = new TGMainFrame(0,800,800);
+ TGHorizontalFrame *fH=new TGHorizontalFrame(fMain,800,400);
+ //------------------------------------------------------------
+ TGLayoutHints *f0= new TGLayoutHints(kLHintsLeft | kLHintsTop,2,2,2,2);
+ TGLayoutHints *layout2= new TGLayoutHints(kLHintsLeft | kLHintsTop,20,20,20,20);
+ // gumbi
+
+ int nbut=8;
+ const char *names[10]={"Init","Start","Stop","Refresh","Clear","Save", "Print" , "Exit"};
+ for (int i=0;i<nbut;i++){
+
+ gTextButton[i]= new TGTextButton(fH, names[i]);
+ gTextButton[i]->SetTextJustify(36);
+ gTextButton[i]->SetMargins(0,0,0,0);
+ gTextButton[i]->SetWrapLength(-1);
+ gTextButton[i]->Resize(50,22);
+ fH->AddFrame(gTextButton[i], layout2);
+ char cmd[50];
+ sprintf(cmd,"MyEventHandler(=%d)",i);
+ TQObject::Connect(gTextButton[i],"Clicked()",0,0,cmd);
+ }
+
+ gCheckButton = new TGCheckButton( fH,"Debug");
+ gCheckButton->Resize(50,22);
+ TQObject::Connect(gCheckButton,"Clicked()", 0, 0 , "GetDebug()");
+ gCheckButton->SetState(kButtonDown);
+ fH->AddFrame(gCheckButton, f0);
+
+ fMain->AddFrame(fH , f0);
+ //---------------------------------------------------------
+ // ura
+ TGLabel *lab1;
+ fH=new TGHorizontalFrame(fMain,800,200);
+ lab1 = new TGLabel( fH ,"Time:");
+ fH->AddFrame(lab1, f0);
+ gTimeDisplay = new TGTextEntry( fH,"");
+ gTimeDisplay->Resize(200,22);
+ fH->AddFrame(gTimeDisplay, f0);
+ fMain->AddFrame(fH , f0);
+ //---------------------------------------------------------
+ // inputi
+ fH=new TGHorizontalFrame(fMain,800,200);
+ lab1 = new TGLabel( fH ,"Filename:");
+ fH->AddFrame(lab1, f0);
+ gFilename = new TGTextEntry( fH,"filename");
+ gFilename->Resize(200,22);
+ fH->AddFrame(gFilename, f0);
+ fMain->AddFrame(fH , f0);
+ //---------------------------------------------------------
+ fH=new TGHorizontalFrame(fMain,800,200);
+ lab1 = new TGLabel( fH ,"ADC Pedestal:");
+ fH->AddFrame(lab1, f0);
+ gPedestal = new TGNumberEntry( fH,100);
+ gPedestal->Resize(100,22);
+ fH->AddFrame(gPedestal, f0);
+ fMain->AddFrame(fH , f0);
+ //---------------------------------------------------------
+ fH=new TGHorizontalFrame(fMain,800,200);
+ lab1 = new TGLabel( fH ,"N of events to acquire:");
+ fH->AddFrame(lab1, f0);
+ gMaxEve = new TGNumberEntry( fH,10000);
+ gMaxEve->Resize(100,22);
+ fH->AddFrame(gMaxEve, f0);
+ fMain->AddFrame(fH , f0);
+ //---------------------------------------------------------
+ fH=new TGHorizontalFrame(fMain,800,200);
+ lab1 = new TGLabel( fH ,"Number of events:");
+ fH->AddFrame(lab1, f0);
+ gNeve = new TGNumberEntry( fH,0);
+ gNeve->Resize(100,22);
+ fH->AddFrame(gNeve, f0);
+ fMain->AddFrame(fH , f0);
+ //---------------------------------------------------------
+ // canvas
+ fH=new TGHorizontalFrame(fMain,800,200);
+ gCanvas = new TRootEmbeddedCanvas ("gCanvas",fH,800,400);
+ fH->AddFrame(gCanvas, f0);
+ fMain->AddFrame(fH , f0);
+ //------------------------------------------------------------
+ fH=new TGHorizontalFrame(fMain,800,200);
+ lab1 = new TGLabel( fH ,"Channel number (0..31):");
+ fH->AddFrame(lab1, f0);
+ gCh = new TGNumberEntry( fH,0);
+ fH->AddFrame(gCh, f0);
+ TQObject::Connect(gCh,"ValueSet(Long_t)",0,0,"Redraw(Long_t )");
+
+ fMain->AddFrame(fH , f0);
+ //------------------------------------------------------------
+ fMain->SetWindowName(WINDOW_NAME);
+ fMain->MapSubwindows();
+ fMain->Resize(fMain->GetDefaultSize());
+ fMain->MapWindow();
+ Redraw();
+ GetDebug();
+ return 0;
+}
Index: petdaqfmf/VmUsbStack.h
===================================================================
--- petdaqfmf/VmUsbStack.h (nonexistent)
+++ petdaqfmf/VmUsbStack.h (revision 112)
@@ -0,0 +1,45 @@
+#ifndef VMUSBSTACK_H
+#define VMUSBSTACK_H
+#define CMD_WRITE 0x000
+#define CMD_READ 0x100
+#define CMD_A24 0x039
+#define CMD_A32 0x009
+#define CMD_HM 0x80000
+#define CMD_HD 0x20000
+#define CMD_MRK 0x2000
+#define CMD_DLY 0x8000
+#define CMD_BLT 0xFF000000
+
+#define CMD_D16 1
+#define CMD_D32 0
+
+#include <vector>
+class VmUsbStack {
+ public:
+ VmUsbStack();
+ ~VmUsbStack();
+ std::vector<int> fStack;
+ void Append(int cmd, int marker);
+ void Append(int cmd, int addr, int data);
+
+ void Marker(int marker);
+ void WriteA32D16(int addr, int data);
+ void ReadA32D16(int addr );
+ void WriteA32D32(int addr, int data);
+ void ReadA32D32(int addr );
+
+ void WriteA24D16(int addr, int data);
+ void ReadA24D16(int addr );
+ void WriteA24D32(int addr, int data);
+ void ReadA24D32(int addr );
+
+ void ConditionalRead(int am ,int d16d32,int addr, int data);
+ void RepeatRead(int addr_modifier,int d16d32, int baseaddr, int n, int increment);
+ void RepeatWrite(int addr_modifier,int d16d32, int baseaddr, int n, int increment, int data);
+
+ int Get(int maxn, int *stack);
+ void Print();
+};
+
+
+#endif
Index: petdaqfmf/Dict.h
===================================================================
--- petdaqfmf/Dict.h (nonexistent)
+++ petdaqfmf/Dict.h (revision 112)
@@ -0,0 +1,44 @@
+/********************************************************************
+* Dict.h
+* CAUTION: DON'T CHANGE THIS FILE. THIS FILE IS AUTOMATICALLY GENERATED
+* FROM HEADER FILES LISTED IN G__setup_cpp_environmentXXX().
+* CHANGE THOSE HEADER FILES AND REGENERATE THIS FILE.
+********************************************************************/
+#ifdef __CINT__
+#error Dict.h/C is only for compilation. Abort cint.
+#endif
+#include <stddef.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <math.h>
+#include <string.h>
+#define G__ANSIHEADER
+#define G__DICTIONARY
+#include "G__ci.h"
+extern "C" {
+extern void G__cpp_setup_tagtableDict();
+extern void G__cpp_setup_inheritanceDict();
+extern void G__cpp_setup_typetableDict();
+extern void G__cpp_setup_memvarDict();
+extern void G__cpp_setup_globalDict();
+extern void G__cpp_setup_memfuncDict();
+extern void G__cpp_setup_funcDict();
+extern void G__set_cpp_environmentDict();
+}
+
+
+#include "TObject.h"
+#include "TMemberInspector.h"
+#include "daq.h"
+#include <algorithm>
+namespace std { }
+using namespace std;
+
+#ifndef G__MEMFUNCBODY
+#endif
+
+extern G__linked_taginfo G__DictLN_vectorlEintcOallocatorlEintgRsPgR;
+extern G__linked_taginfo G__DictLN_VmUsbStack;
+extern G__linked_taginfo G__DictLN_daq;
+
+/* STUB derived class for protected member access */
Index: petdaqfmf/vme.h
===================================================================
--- petdaqfmf/vme.h (nonexistent)
+++ petdaqfmf/vme.h (revision 112)
@@ -0,0 +1,6 @@
+#ifndef _VME_H_
+#define _VME_H_
+
+#define _VI_FUNC
+#include "wienvme_dll.h"
+#endif
Index: petdaqfmf/Makefile
===================================================================
--- petdaqfmf/Makefile (nonexistent)
+++ petdaqfmf/Makefile (revision 112)
@@ -0,0 +1,78 @@
+
+ROOTINC=$(shell root-config --incdir )
+ROOTLIB=$(shell root-config --libs )
+
+
+INC=-I. -I$(ROOTINC)
+
+
+LIBS=$(ROOTLIB) -L./ -lm
+LIBS1=$(shell root-config --libs --glibs )
+
+
+
+SRC = .
+INC1 = -I. -I../lib -I/usr/include
+DBG =
+CFLAGS = $(DBG) $(INC1) -Wall
+
+
+TARGET1 = daq
+
+FILES1 = $(SRC)/daq.C
+
+VMELIB = libf9vme.a
+
+SHLIB = $(VMELIB) -lusb -lz
+
+OBJ_FILES = VMEModule.o CAENV965.o libxxusb.o wienvmeusb_dll.o VmUsbStack.o
+
+all: vme $(TARGET1)
+
+libxxusb.o: libxxusb.cpp libxxusb.h
+
+
+
+.cpp.o:
+ $(CXX) -c -g $<
+ ar r $(VMELIB) $@
+
+.C.o:
+ $(CXX) -c -g $<
+ ar r $(VMELIB) $@
+
+
+.cc.o:
+ $(CXX) -c -g $<
+ ar r $(VMELIB) $@
+
+.c.o:
+ $(CXX) -c -g $<
+ ar r $(VMELIB) $@
+
+vme: $(OBJ_FILES)
+
+wienvme_dll.o: wienvme_dll.c
+
+
+
+VMEModule.o: VMEModule.hh VMEModule.cc
+
+CAENV965.o: CAENV965.h CAENV965_DEF.h CAENV965.c
+
+
+$(TARGET1): $(FILES1) vme
+ $(CXX) -DMAIN $(FILES1) $(CFLAGS) -o $(TARGET1) $(SHLIB) -lstdc++
+
+
+libdaq.so: $(FILES1)
+ @echo "Generating dictionary Dict.C..."
+ rootcint -f Dict.C -c $(INC) $(CPPFLAGS) daq.h LinkDef.h
+ $(CXX) -DG__DICTIONARY $(CPPFLAGS) $(INC) -fPIC -g -Wall $(FILES1) Dict.C -L. $(SHLIB) -shared -o libdaq.so
+
+clean:
+ rm Dict.C libdaq.so $(TARGET1)
+
+
+tgz:
+ tar czvf vme.tgz Makefile *.c *.h *.C *.cc *.hh