Subversion Repositories f9daq

Compare Revisions

Ignore whitespace Rev 152 → Rev 153

/cvi/instr/FTD2xx/FTD2xx.prj
0,0 → 1,432
[Project Header]
Version = 1302
Pathname = "/c/SAMO/Programi/NI/cvi/instr/FTD2xx/FTD2xx.prj"
CVI Dir = "/c/program files (x86)/national instruments/cvi2013"
CVI Shared Dir = "/C/Program Files (x86)/National Instruments/Shared/CVI"
CVI Pub Local Dir = "/C/ProgramData/National Instruments/CVI2013"
CVI Pub Global Dir = "/C/ProgramData/National Instruments/CVI"
IVI Standard Root Dir = "/C/Program Files (x86)/IVI Foundation/IVI"
VXIplug&play Framework Dir = "/C/Program Files (x86)/IVI Foundation/VISA/winnt"
IVI Standard Root 64-bit Dir = "/C/Program Files/IVI Foundation/IVI"
VXIplug&play Framework 64-bit Dir = "/C/Program Files/IVI Foundation/VISA/win64"
Number of Files = 3
Target Type = "Executable"
Flags = 2064
Copied From Locked InstrDrv Directory = False
Copied from VXIPNP Directory = False
Locked InstrDrv Name = ""
Don't Display Deploy InstrDrv Dialog = False
 
[Folders]
User Interface Files Folder Not Added Yet = True
Instrument Files Folder Not Added Yet = True
Folder 0 = "Include Files"
FolderEx 0 = "Include Files"
Folder 1 = "Source Files"
FolderEx 1 = "Source Files"
Folder 2 = "Library Files"
FolderEx 2 = "Library Files"
 
[File 0001]
File Type = "Include"
Res Id = 1
Path Is Rel = True
Path Rel To = "Project"
Path Rel Path = "ftd2xx.h"
Path = "/c/SAMO/Programi/NI/cvi/instr/FTD2xx/ftd2xx.h"
Exclude = False
Project Flags = 0
Folder = "Include Files"
Folder Id = 0
 
[File 0002]
File Type = "CSource"
Res Id = 2
Path Is Rel = True
Path Rel To = "Project"
Path Rel Path = "ftd2xxd.c"
Path = "/c/SAMO/Programi/NI/cvi/instr/FTD2xx/ftd2xxd.c"
Exclude = False
Compile Into Object File = False
Project Flags = 0
Folder = "Source Files"
Folder Id = 1
 
[File 0003]
File Type = "Library"
Res Id = 3
Path Is Rel = True
Path Rel To = "Project"
Path Rel Path = "ftd2xx.lib"
Path = "/c/SAMO/Programi/NI/cvi/instr/FTD2xx/ftd2xx.lib"
Exclude = False
Project Flags = 0
Folder = "Library Files"
Folder Id = 2
 
[Custom Build Configs]
Num Custom Build Configs = 0
 
[Default Build Config Debug]
Config Name = "Debug"
Is 64-Bit = False
Is Release = False
Default Calling Convention = "cdecl"
Optimization Level = "Optimize for speed (level 2)"
Require Prototypes = True
Show Warning IDs in Build Output = False
Selected Warning Level = "Common"
Warning List None = ""
Warning List Common = ""
Warning List Extended = ""
Warning List All = ""
Warning Mode = 0
Enable Unreferenced Identifiers Warning = True
Enable Pointer Mismatch Warning = True
Enable Unreachable Code Warning = True
Enable Assignment In Conditional Warning = True
Uninitialized Locals Compile Warning = "Aggressive"
Require Return Values = True
Enable C99 Extensions = True
Enable OpenMP Extensions = False
Stack Size = 250000
Stack Reserve = 1048576
Stack Commit = 4096
Image Base Address = 4194304
Image Base Address x64 = 4194304
Compiler Defines = "/DWIN32_LEAN_AND_MEAN"
Sign = False
Sign Store = ""
Sign Certificate = ""
Sign Timestamp URL = ""
Sign URL = ""
Manifest Embed = False
Icon File Is Rel = False
Icon File = ""
Application Title = ""
Use IVI Subdirectories for Import Libraries = False
Use VXIPNP Subdirectories for Import Libraries = False
Use Dflt Import Lib Base Name = True
Where to Copy DLL = "Do not copy"
Custom Directory to Copy DLL Is Rel = False
Custom Directory to Copy DLL = ""
Generate Source Documentation = "None"
Runtime Support = "Full Runtime Support"
Runtime Binding = "Shared"
Embed Project .UIRs = False
Generate Map File = False
Embed Timestamp = True
Create Console Application = False
Using LoadExternalModule = False
DLL Exports = "Include File Symbols"
Register ActiveX Server = False
Numeric File Version = "1,0,0,0"
Numeric Prod Version = "1,0,0,0"
Comments = ""
Comments Ex = ""
Company Name = ""
Company Name Ex = "%company"
File Description = "FTD2xx (Debug x86)"
File Description Ex = "%application (%rel_dbg %arch)"
File Version = "1.0"
File Version Ex = "%f1.%f2"
Internal Name = "FTD2xx"
Internal Name Ex = "%basename"
Legal Copyright = "Copyright © 2016"
Legal Copyright Ex = "Copyright © %company %Y"
Legal Trademarks = ""
Legal Trademarks Ex = ""
Original Filename = "FTD2xx.exe"
Original Filename Ex = "%filename"
Private Build = ""
Private Build Ex = ""
Product Name = " FTD2xx"
Product Name Ex = "%company %application"
Product Version = "1.0"
Product Version Ex = "%p1.%p2"
Special Build = ""
Special Build Ex = ""
Add Type Lib To DLL = False
Include Type Lib Help Links = False
TLB Help Style = "HLP"
Type Lib FP File Is Rel = False
Type Lib FP File = ""
 
[Default Build Config Release]
Config Name = "Release"
Is 64-Bit = False
Is Release = True
Default Calling Convention = "cdecl"
Optimization Level = "Optimize for speed (level 2)"
Require Prototypes = True
Show Warning IDs in Build Output = False
Selected Warning Level = "Common"
Warning List None = ""
Warning List Common = ""
Warning List Extended = ""
Warning List All = ""
Warning Mode = 0
Enable Unreferenced Identifiers Warning = True
Enable Pointer Mismatch Warning = True
Enable Unreachable Code Warning = True
Enable Assignment In Conditional Warning = True
Uninitialized Locals Compile Warning = "Aggressive"
Require Return Values = True
Enable C99 Extensions = True
Enable OpenMP Extensions = False
Stack Size = 250000
Stack Reserve = 1048576
Stack Commit = 4096
Image Base Address = 4194304
Image Base Address x64 = 4194304
Compiler Defines = "/DWIN32_LEAN_AND_MEAN"
Sign = False
Sign Store = ""
Sign Certificate = ""
Sign Timestamp URL = ""
Sign URL = ""
Manifest Embed = False
Icon File Is Rel = False
Icon File = ""
Application Title = ""
Use IVI Subdirectories for Import Libraries = False
Use VXIPNP Subdirectories for Import Libraries = False
Use Dflt Import Lib Base Name = True
Where to Copy DLL = "Do not copy"
Custom Directory to Copy DLL Is Rel = False
Custom Directory to Copy DLL = ""
Generate Source Documentation = "None"
Runtime Support = "Full Runtime Support"
Runtime Binding = "Shared"
Embed Project .UIRs = False
Generate Map File = False
Embed Timestamp = True
Create Console Application = False
Using LoadExternalModule = False
DLL Exports = "Include File Symbols"
Register ActiveX Server = False
Add Type Lib To DLL = False
Include Type Lib Help Links = False
TLB Help Style = "HLP"
Type Lib FP File Is Rel = False
Type Lib FP File = ""
 
[Default Build Config Debug64]
Config Name = "Debug64"
Is 64-Bit = True
Is Release = False
Default Calling Convention = "cdecl"
Optimization Level = "Optimize for speed (level 2)"
Require Prototypes = True
Show Warning IDs in Build Output = False
Selected Warning Level = "Common"
Warning List None = ""
Warning List Common = ""
Warning List Extended = ""
Warning List All = ""
Warning Mode = 0
Enable Unreferenced Identifiers Warning = True
Enable Pointer Mismatch Warning = True
Enable Unreachable Code Warning = True
Enable Assignment In Conditional Warning = True
Uninitialized Locals Compile Warning = "Aggressive"
Require Return Values = True
Enable C99 Extensions = True
Enable OpenMP Extensions = False
Stack Size = 250000
Stack Reserve = 1048576
Stack Commit = 4096
Image Base Address = 4194304
Image Base Address x64 = 4194304
Compiler Defines = "/DWIN32_LEAN_AND_MEAN"
Sign = False
Sign Store = ""
Sign Certificate = ""
Sign Timestamp URL = ""
Sign URL = ""
Manifest Embed = False
Icon File Is Rel = False
Icon File = ""
Application Title = ""
Use IVI Subdirectories for Import Libraries = False
Use VXIPNP Subdirectories for Import Libraries = False
Use Dflt Import Lib Base Name = True
Where to Copy DLL = "Do not copy"
Custom Directory to Copy DLL Is Rel = False
Custom Directory to Copy DLL = ""
Generate Source Documentation = "None"
Runtime Support = "Full Runtime Support"
Runtime Binding = "Shared"
Embed Project .UIRs = False
Generate Map File = False
Embed Timestamp = True
Create Console Application = False
Using LoadExternalModule = False
DLL Exports = "Include File Symbols"
Register ActiveX Server = False
Add Type Lib To DLL = False
Include Type Lib Help Links = False
TLB Help Style = "HLP"
Type Lib FP File Is Rel = False
Type Lib FP File = ""
 
[Default Build Config Release64]
Config Name = "Release64"
Is 64-Bit = True
Is Release = True
Default Calling Convention = "cdecl"
Optimization Level = "Optimize for speed (level 2)"
Require Prototypes = True
Show Warning IDs in Build Output = False
Selected Warning Level = "Common"
Warning List None = ""
Warning List Common = ""
Warning List Extended = ""
Warning List All = ""
Warning Mode = 0
Enable Unreferenced Identifiers Warning = True
Enable Pointer Mismatch Warning = True
Enable Unreachable Code Warning = True
Enable Assignment In Conditional Warning = True
Uninitialized Locals Compile Warning = "Aggressive"
Require Return Values = True
Enable C99 Extensions = True
Enable OpenMP Extensions = False
Stack Size = 250000
Stack Reserve = 1048576
Stack Commit = 4096
Image Base Address = 4194304
Image Base Address x64 = 4194304
Compiler Defines = "/DWIN32_LEAN_AND_MEAN"
Sign = False
Sign Store = ""
Sign Certificate = ""
Sign Timestamp URL = ""
Sign URL = ""
Manifest Embed = False
Icon File Is Rel = False
Icon File = ""
Application Title = ""
Use IVI Subdirectories for Import Libraries = False
Use VXIPNP Subdirectories for Import Libraries = False
Use Dflt Import Lib Base Name = True
Where to Copy DLL = "Do not copy"
Custom Directory to Copy DLL Is Rel = False
Custom Directory to Copy DLL = ""
Generate Source Documentation = "None"
Runtime Support = "Full Runtime Support"
Runtime Binding = "Shared"
Embed Project .UIRs = False
Generate Map File = False
Embed Timestamp = True
Create Console Application = False
Using LoadExternalModule = False
DLL Exports = "Include File Symbols"
Register ActiveX Server = False
Add Type Lib To DLL = False
Include Type Lib Help Links = False
TLB Help Style = "HLP"
Type Lib FP File Is Rel = False
Type Lib FP File = ""
 
[Compiler Options]
Default Calling Convention = "cdecl"
Require Prototypes = True
Require Return Values = False
Enable Pointer Mismatch Warning = False
Enable Unreachable Code Warning = False
Enable Unreferenced Identifiers Warning = False
Enable Assignment In Conditional Warning = False
O Option Compatible With 5.0 = False
Enable C99 Extensions = True
Uninitialized Locals Compile Warning = "Disabled"
Precompile Prefix Header = False
Prefix Header File = ""
 
[Run Options]
Stack Size = 250000
Stack Commit = 4096
Image Base Address = 4194304
Image Base Address x64 = 4194304
 
[Compiler Defines]
Compiler Defines = "/DWIN32_LEAN_AND_MEAN"
 
[Create Executable]
Executable File_Debug Is Rel = True
Executable File_Debug Rel To = "Project"
Executable File_Debug Rel Path = "FTD2xx.exe"
Executable File_Debug = "/c/SAMO/Programi/NI/cvi/instr/FTD2xx/FTD2xx.exe"
Executable File_Release Is Rel = True
Executable File_Release Rel To = "Project"
Executable File_Release Rel Path = "FTD2xx.exe"
Executable File_Release = "/c/SAMO/Programi/NI/cvi/instr/FTD2xx/FTD2xx.exe"
Executable File_Debug64 Is Rel = True
Executable File_Debug64 Rel To = "Project"
Executable File_Debug64 Rel Path = "FTD2xx.exe"
Executable File_Debug64 = "/c/SAMO/Programi/NI/cvi/instr/FTD2xx/FTD2xx.exe"
Executable File_Release64 Is Rel = True
Executable File_Release64 Rel To = "Project"
Executable File_Release64 Rel Path = "FTD2xx.exe"
Executable File_Release64 = "/c/SAMO/Programi/NI/cvi/instr/FTD2xx/FTD2xx.exe"
Icon File Is Rel = False
Icon File = ""
Application Title = ""
DLL Exports = "Include File Symbols"
Use IVI Subdirectories for Import Libraries = False
Use VXIPNP Subdirectories for Import Libraries = False
Use Dflt Import Lib Base Name = True
Where to Copy DLL = "Do not copy"
Custom Directory to Copy DLL Is Rel = False
Custom Directory to Copy DLL = ""
Generate Source Documentation = "None"
Add Type Lib To DLL = False
Include Type Lib Help Links = False
TLB Help Style = "HLP"
Type Lib FP File Is Rel = False
Type Lib FP File = ""
Type Lib Guid = ""
Runtime Support = "Full Runtime Support"
Instrument Driver Support Only = False
Embed Project .UIRs = False
Generate Map File = False
 
[External Compiler Support]
UIR Callbacks File Option = 0
Using LoadExternalModule = False
Create Project Symbols File = True
UIR Callbacks Obj File Is Rel = False
UIR Callbacks Obj File = ""
Project Symbols H File Is Rel = False
Project Symbols H File = ""
Project Symbols Obj File Is Rel = False
Project Symbols Obj File = ""
 
[ActiveX Server Options]
Specification File Is Rel = False
Specification File = ""
Source File Is Rel = False
Source File = ""
Include File Is Rel = False
Include File = ""
IDL File Is Rel = False
IDL File = ""
Register ActiveX Server = False
 
[Signing Info]
Sign = False
Sign Debug Build = False
Store = ""
Certificate = ""
Timestamp URL = ""
URL = ""
 
[Manifest Info]
Embed = False
 
[tpcSection]
tpcEnabled = 0
tpcOverrideEnvironment = 0
tpcEnabled x64 = 0
tpcOverrideEnvironment x64 = 0
 
/cvi/instr/FTD2xx/ftd2xx.h
0,0 → 1,1444
/*++
 
Copyright © 2001-2011 Future Technology Devices International Limited
 
THIS SOFTWARE IS PROVIDED BY FUTURE TECHNOLOGY DEVICES INTERNATIONAL LIMITED "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
FUTURE TECHNOLOGY DEVICES INTERNATIONAL LIMITED BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE, DATA, OR PROFITS OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
FTDI DRIVERS MAY BE USED ONLY IN CONJUNCTION WITH PRODUCTS BASED ON FTDI PARTS.
 
FTDI DRIVERS MAY BE DISTRIBUTED IN ANY FORM AS LONG AS LICENSE INFORMATION IS NOT MODIFIED.
 
IF A CUSTOM VENDOR ID AND/OR PRODUCT ID OR DESCRIPTION STRING ARE USED, IT IS THE
RESPONSIBILITY OF THE PRODUCT MANUFACTURER TO MAINTAIN ANY CHANGES AND SUBSEQUENT WHQL
RE-CERTIFICATION AS A RESULT OF MAKING THESE CHANGES.
 
 
Module Name:
 
ftd2xx.h
 
Abstract:
 
Native USB device driver for FTDI FT232x, FT245x, FT2232x and FT4232x devices
FTD2XX library definitions
 
Environment:
 
kernel & user mode
 
 
--*/
 
 
#ifndef FTD2XX_H
#define FTD2XX_H
 
#ifdef _WIN32
// Compiling on Windows
#include <windows.h>
 
// The following ifdef block is the standard way of creating macros
// which make exporting from a DLL simpler. All files within this DLL
// are compiled with the FTD2XX_EXPORTS symbol defined on the command line.
// This symbol should not be defined on any project that uses this DLL.
// This way any other project whose source files include this file see
// FTD2XX_API functions as being imported from a DLL, whereas this DLL
// sees symbols defined with this macro as being exported.
 
#ifdef FTD2XX_EXPORTS
#define FTD2XX_API __declspec(dllexport)
#elif defined(FTD2XX_STATIC)
// Avoid decorations when linking statically to D2XX.
#define FTD2XX_API
// Static D2XX depends on these Windows libs:
#pragma comment(lib, "setupapi.lib")
#pragma comment(lib, "advapi32.lib")
#pragma comment(lib, "user32.lib")
#else
#define FTD2XX_API __declspec(dllimport)
#endif
 
#else // _WIN32
// Compiling on non-Windows platform.
#include "WinTypes.h"
// No decorations needed.
#define FTD2XX_API
 
#endif // _WIN32
 
typedef PVOID FT_HANDLE;
typedef ULONG FT_STATUS;
 
//
// Device status
//
enum {
FT_OK,
FT_INVALID_HANDLE,
FT_DEVICE_NOT_FOUND,
FT_DEVICE_NOT_OPENED,
FT_IO_ERROR,
FT_INSUFFICIENT_RESOURCES,
FT_INVALID_PARAMETER,
FT_INVALID_BAUD_RATE,
 
FT_DEVICE_NOT_OPENED_FOR_ERASE,
FT_DEVICE_NOT_OPENED_FOR_WRITE,
FT_FAILED_TO_WRITE_DEVICE,
FT_EEPROM_READ_FAILED,
FT_EEPROM_WRITE_FAILED,
FT_EEPROM_ERASE_FAILED,
FT_EEPROM_NOT_PRESENT,
FT_EEPROM_NOT_PROGRAMMED,
FT_INVALID_ARGS,
FT_NOT_SUPPORTED,
FT_OTHER_ERROR,
FT_DEVICE_LIST_NOT_READY,
};
 
 
#define FT_SUCCESS(status) ((status) == FT_OK)
 
//
// FT_OpenEx Flags
//
 
#define FT_OPEN_BY_SERIAL_NUMBER 1
#define FT_OPEN_BY_DESCRIPTION 2
#define FT_OPEN_BY_LOCATION 4
 
#define FT_OPEN_MASK (FT_OPEN_BY_SERIAL_NUMBER | \
FT_OPEN_BY_DESCRIPTION | \
FT_OPEN_BY_LOCATION)
 
//
// FT_ListDevices Flags (used in conjunction with FT_OpenEx Flags
//
 
#define FT_LIST_NUMBER_ONLY 0x80000000
#define FT_LIST_BY_INDEX 0x40000000
#define FT_LIST_ALL 0x20000000
 
#define FT_LIST_MASK (FT_LIST_NUMBER_ONLY|FT_LIST_BY_INDEX|FT_LIST_ALL)
 
//
// Baud Rates
//
 
#define FT_BAUD_300 300
#define FT_BAUD_600 600
#define FT_BAUD_1200 1200
#define FT_BAUD_2400 2400
#define FT_BAUD_4800 4800
#define FT_BAUD_9600 9600
#define FT_BAUD_14400 14400
#define FT_BAUD_19200 19200
#define FT_BAUD_38400 38400
#define FT_BAUD_57600 57600
#define FT_BAUD_115200 115200
#define FT_BAUD_230400 230400
#define FT_BAUD_460800 460800
#define FT_BAUD_921600 921600
 
//
// Word Lengths
//
 
#define FT_BITS_8 (UCHAR) 8
#define FT_BITS_7 (UCHAR) 7
 
//
// Stop Bits
//
 
#define FT_STOP_BITS_1 (UCHAR) 0
#define FT_STOP_BITS_2 (UCHAR) 2
 
//
// Parity
//
 
#define FT_PARITY_NONE (UCHAR) 0
#define FT_PARITY_ODD (UCHAR) 1
#define FT_PARITY_EVEN (UCHAR) 2
#define FT_PARITY_MARK (UCHAR) 3
#define FT_PARITY_SPACE (UCHAR) 4
 
//
// Flow Control
//
 
#define FT_FLOW_NONE 0x0000
#define FT_FLOW_RTS_CTS 0x0100
#define FT_FLOW_DTR_DSR 0x0200
#define FT_FLOW_XON_XOFF 0x0400
 
//
// Purge rx and tx buffers
//
#define FT_PURGE_RX 1
#define FT_PURGE_TX 2
 
//
// Events
//
 
typedef void (*PFT_EVENT_HANDLER)(DWORD,DWORD);
 
#define FT_EVENT_RXCHAR 1
#define FT_EVENT_MODEM_STATUS 2
#define FT_EVENT_LINE_STATUS 4
 
//
// Timeouts
//
 
#define FT_DEFAULT_RX_TIMEOUT 300
#define FT_DEFAULT_TX_TIMEOUT 300
 
//
// Device types
//
 
typedef ULONG FT_DEVICE;
 
enum {
FT_DEVICE_BM,
FT_DEVICE_AM,
FT_DEVICE_100AX,
FT_DEVICE_UNKNOWN,
FT_DEVICE_2232C,
FT_DEVICE_232R,
FT_DEVICE_2232H,
FT_DEVICE_4232H,
FT_DEVICE_232H,
FT_DEVICE_X_SERIES,
FT_DEVICE_4222H_0,
FT_DEVICE_4222H_1_2,
FT_DEVICE_4222H_3,
FT_DEVICE_4222_PROG,
FT_DEVICE_900,
};
 
//
// Bit Modes
//
 
#define FT_BITMODE_RESET 0x00
#define FT_BITMODE_ASYNC_BITBANG 0x01
#define FT_BITMODE_MPSSE 0x02
#define FT_BITMODE_SYNC_BITBANG 0x04
#define FT_BITMODE_MCU_HOST 0x08
#define FT_BITMODE_FAST_SERIAL 0x10
#define FT_BITMODE_CBUS_BITBANG 0x20
#define FT_BITMODE_SYNC_FIFO 0x40
 
//
// FT232R CBUS Options EEPROM values
//
 
#define FT_232R_CBUS_TXDEN 0x00 // Tx Data Enable
#define FT_232R_CBUS_PWRON 0x01 // Power On
#define FT_232R_CBUS_RXLED 0x02 // Rx LED
#define FT_232R_CBUS_TXLED 0x03 // Tx LED
#define FT_232R_CBUS_TXRXLED 0x04 // Tx and Rx LED
#define FT_232R_CBUS_SLEEP 0x05 // Sleep
#define FT_232R_CBUS_CLK48 0x06 // 48MHz clock
#define FT_232R_CBUS_CLK24 0x07 // 24MHz clock
#define FT_232R_CBUS_CLK12 0x08 // 12MHz clock
#define FT_232R_CBUS_CLK6 0x09 // 6MHz clock
#define FT_232R_CBUS_IOMODE 0x0A // IO Mode for CBUS bit-bang
#define FT_232R_CBUS_BITBANG_WR 0x0B // Bit-bang write strobe
#define FT_232R_CBUS_BITBANG_RD 0x0C // Bit-bang read strobe
 
//
// FT232H CBUS Options EEPROM values
//
 
#define FT_232H_CBUS_TRISTATE 0x00 // Tristate
#define FT_232H_CBUS_TXLED 0x01 // Tx LED
#define FT_232H_CBUS_RXLED 0x02 // Rx LED
#define FT_232H_CBUS_TXRXLED 0x03 // Tx and Rx LED
#define FT_232H_CBUS_PWREN 0x04 // Power Enable
#define FT_232H_CBUS_SLEEP 0x05 // Sleep
#define FT_232H_CBUS_DRIVE_0 0x06 // Drive pin to logic 0
#define FT_232H_CBUS_DRIVE_1 0x07 // Drive pin to logic 1
#define FT_232H_CBUS_IOMODE 0x08 // IO Mode for CBUS bit-bang
#define FT_232H_CBUS_TXDEN 0x09 // Tx Data Enable
#define FT_232H_CBUS_CLK30 0x0A // 30MHz clock
#define FT_232H_CBUS_CLK15 0x0B // 15MHz clock
#define FT_232H_CBUS_CLK7_5 0x0C // 7.5MHz clock
 
//
// FT X Series CBUS Options EEPROM values
//
 
#define FT_X_SERIES_CBUS_TRISTATE 0x00 // Tristate
#define FT_X_SERIES_CBUS_TXLED 0x01 // Tx LED
#define FT_X_SERIES_CBUS_RXLED 0x02 // Rx LED
#define FT_X_SERIES_CBUS_TXRXLED 0x03 // Tx and Rx LED
#define FT_X_SERIES_CBUS_PWREN 0x04 // Power Enable
#define FT_X_SERIES_CBUS_SLEEP 0x05 // Sleep
#define FT_X_SERIES_CBUS_DRIVE_0 0x06 // Drive pin to logic 0
#define FT_X_SERIES_CBUS_DRIVE_1 0x07 // Drive pin to logic 1
#define FT_X_SERIES_CBUS_IOMODE 0x08 // IO Mode for CBUS bit-bang
#define FT_X_SERIES_CBUS_TXDEN 0x09 // Tx Data Enable
#define FT_X_SERIES_CBUS_CLK24 0x0A // 24MHz clock
#define FT_X_SERIES_CBUS_CLK12 0x0B // 12MHz clock
#define FT_X_SERIES_CBUS_CLK6 0x0C // 6MHz clock
#define FT_X_SERIES_CBUS_BCD_CHARGER 0x0D // Battery charger detected
#define FT_X_SERIES_CBUS_BCD_CHARGER_N 0x0E // Battery charger detected inverted
#define FT_X_SERIES_CBUS_I2C_TXE 0x0F // I2C Tx empty
#define FT_X_SERIES_CBUS_I2C_RXF 0x10 // I2C Rx full
#define FT_X_SERIES_CBUS_VBUS_SENSE 0x11 // Detect VBUS
#define FT_X_SERIES_CBUS_BITBANG_WR 0x12 // Bit-bang write strobe
#define FT_X_SERIES_CBUS_BITBANG_RD 0x13 // Bit-bang read strobe
#define FT_X_SERIES_CBUS_TIMESTAMP 0x14 // Toggle output when a USB SOF token is received
#define FT_X_SERIES_CBUS_KEEP_AWAKE 0x15 //
 
 
// Driver types
#define FT_DRIVER_TYPE_D2XX 0
#define FT_DRIVER_TYPE_VCP 1
 
 
 
#ifdef __cplusplus
extern "C" {
#endif
 
 
#ifdef FTD2XX_STATIC
FTD2XX_API
FT_STATUS WINAPI FT_Initialise(
void
);
 
FTD2XX_API
void WINAPI FT_Finalise(
void
);
#endif // FTD2XX_STATIC
 
FTD2XX_API
FT_STATUS WINAPI FT_Open(
int deviceNumber,
FT_HANDLE *pHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_OpenEx(
PVOID pArg1,
DWORD Flags,
FT_HANDLE *pHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_ListDevices(
PVOID pArg1,
PVOID pArg2,
DWORD Flags
);
 
FTD2XX_API
FT_STATUS WINAPI FT_Close(
FT_HANDLE ftHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_Read(
FT_HANDLE ftHandle,
LPVOID lpBuffer,
DWORD dwBytesToRead,
LPDWORD lpBytesReturned
);
 
FTD2XX_API
FT_STATUS WINAPI FT_Write(
FT_HANDLE ftHandle,
LPVOID lpBuffer,
DWORD dwBytesToWrite,
LPDWORD lpBytesWritten
);
 
FTD2XX_API
FT_STATUS WINAPI FT_IoCtl(
FT_HANDLE ftHandle,
DWORD dwIoControlCode,
LPVOID lpInBuf,
DWORD nInBufSize,
LPVOID lpOutBuf,
DWORD nOutBufSize,
LPDWORD lpBytesReturned,
LPOVERLAPPED lpOverlapped
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetBaudRate(
FT_HANDLE ftHandle,
ULONG BaudRate
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetDivisor(
FT_HANDLE ftHandle,
USHORT Divisor
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetDataCharacteristics(
FT_HANDLE ftHandle,
UCHAR WordLength,
UCHAR StopBits,
UCHAR Parity
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetFlowControl(
FT_HANDLE ftHandle,
USHORT FlowControl,
UCHAR XonChar,
UCHAR XoffChar
);
 
FTD2XX_API
FT_STATUS WINAPI FT_ResetDevice(
FT_HANDLE ftHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetDtr(
FT_HANDLE ftHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_ClrDtr(
FT_HANDLE ftHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetRts(
FT_HANDLE ftHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_ClrRts(
FT_HANDLE ftHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_GetModemStatus(
FT_HANDLE ftHandle,
ULONG *pModemStatus
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetChars(
FT_HANDLE ftHandle,
UCHAR EventChar,
UCHAR EventCharEnabled,
UCHAR ErrorChar,
UCHAR ErrorCharEnabled
);
 
FTD2XX_API
FT_STATUS WINAPI FT_Purge(
FT_HANDLE ftHandle,
ULONG Mask
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetTimeouts(
FT_HANDLE ftHandle,
ULONG ReadTimeout,
ULONG WriteTimeout
);
 
FTD2XX_API
FT_STATUS WINAPI FT_GetQueueStatus(
FT_HANDLE ftHandle,
DWORD *dwRxBytes
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetEventNotification(
FT_HANDLE ftHandle,
DWORD Mask,
PVOID Param
);
 
FTD2XX_API
FT_STATUS WINAPI FT_GetStatus(
FT_HANDLE ftHandle,
DWORD *dwRxBytes,
DWORD *dwTxBytes,
DWORD *dwEventDWord
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetBreakOn(
FT_HANDLE ftHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetBreakOff(
FT_HANDLE ftHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetWaitMask(
FT_HANDLE ftHandle,
DWORD Mask
);
 
FTD2XX_API
FT_STATUS WINAPI FT_WaitOnMask(
FT_HANDLE ftHandle,
DWORD *Mask
);
 
FTD2XX_API
FT_STATUS WINAPI FT_GetEventStatus(
FT_HANDLE ftHandle,
DWORD *dwEventDWord
);
 
FTD2XX_API
FT_STATUS WINAPI FT_ReadEE(
FT_HANDLE ftHandle,
DWORD dwWordOffset,
LPWORD lpwValue
);
 
FTD2XX_API
FT_STATUS WINAPI FT_WriteEE(
FT_HANDLE ftHandle,
DWORD dwWordOffset,
WORD wValue
);
 
FTD2XX_API
FT_STATUS WINAPI FT_EraseEE(
FT_HANDLE ftHandle
);
 
//
// structure to hold program data for FT_EE_Program, FT_EE_ProgramEx, FT_EE_Read
// and FT_EE_ReadEx functions
//
typedef struct ft_program_data {
 
DWORD Signature1; // Header - must be 0x00000000
DWORD Signature2; // Header - must be 0xffffffff
DWORD Version; // Header - FT_PROGRAM_DATA version
// 0 = original
// 1 = FT2232 extensions
// 2 = FT232R extensions
// 3 = FT2232H extensions
// 4 = FT4232H extensions
// 5 = FT232H extensions
 
WORD VendorId; // 0x0403
WORD ProductId; // 0x6001
char *Manufacturer; // "FTDI"
char *ManufacturerId; // "FT"
char *Description; // "USB HS Serial Converter"
char *SerialNumber; // "FT000001" if fixed, or NULL
WORD MaxPower; // 0 < MaxPower <= 500
WORD PnP; // 0 = disabled, 1 = enabled
WORD SelfPowered; // 0 = bus powered, 1 = self powered
WORD RemoteWakeup; // 0 = not capable, 1 = capable
//
// Rev4 (FT232B) extensions
//
UCHAR Rev4; // non-zero if Rev4 chip, zero otherwise
UCHAR IsoIn; // non-zero if in endpoint is isochronous
UCHAR IsoOut; // non-zero if out endpoint is isochronous
UCHAR PullDownEnable; // non-zero if pull down enabled
UCHAR SerNumEnable; // non-zero if serial number to be used
UCHAR USBVersionEnable; // non-zero if chip uses USBVersion
WORD USBVersion; // BCD (0x0200 => USB2)
//
// Rev 5 (FT2232) extensions
//
UCHAR Rev5; // non-zero if Rev5 chip, zero otherwise
UCHAR IsoInA; // non-zero if in endpoint is isochronous
UCHAR IsoInB; // non-zero if in endpoint is isochronous
UCHAR IsoOutA; // non-zero if out endpoint is isochronous
UCHAR IsoOutB; // non-zero if out endpoint is isochronous
UCHAR PullDownEnable5; // non-zero if pull down enabled
UCHAR SerNumEnable5; // non-zero if serial number to be used
UCHAR USBVersionEnable5; // non-zero if chip uses USBVersion
WORD USBVersion5; // BCD (0x0200 => USB2)
UCHAR AIsHighCurrent; // non-zero if interface is high current
UCHAR BIsHighCurrent; // non-zero if interface is high current
UCHAR IFAIsFifo; // non-zero if interface is 245 FIFO
UCHAR IFAIsFifoTar; // non-zero if interface is 245 FIFO CPU target
UCHAR IFAIsFastSer; // non-zero if interface is Fast serial
UCHAR AIsVCP; // non-zero if interface is to use VCP drivers
UCHAR IFBIsFifo; // non-zero if interface is 245 FIFO
UCHAR IFBIsFifoTar; // non-zero if interface is 245 FIFO CPU target
UCHAR IFBIsFastSer; // non-zero if interface is Fast serial
UCHAR BIsVCP; // non-zero if interface is to use VCP drivers
//
// Rev 6 (FT232R) extensions
//
UCHAR UseExtOsc; // Use External Oscillator
UCHAR HighDriveIOs; // High Drive I/Os
UCHAR EndpointSize; // Endpoint size
UCHAR PullDownEnableR; // non-zero if pull down enabled
UCHAR SerNumEnableR; // non-zero if serial number to be used
UCHAR InvertTXD; // non-zero if invert TXD
UCHAR InvertRXD; // non-zero if invert RXD
UCHAR InvertRTS; // non-zero if invert RTS
UCHAR InvertCTS; // non-zero if invert CTS
UCHAR InvertDTR; // non-zero if invert DTR
UCHAR InvertDSR; // non-zero if invert DSR
UCHAR InvertDCD; // non-zero if invert DCD
UCHAR InvertRI; // non-zero if invert RI
UCHAR Cbus0; // Cbus Mux control
UCHAR Cbus1; // Cbus Mux control
UCHAR Cbus2; // Cbus Mux control
UCHAR Cbus3; // Cbus Mux control
UCHAR Cbus4; // Cbus Mux control
UCHAR RIsD2XX; // non-zero if using D2XX driver
//
// Rev 7 (FT2232H) Extensions
//
UCHAR PullDownEnable7; // non-zero if pull down enabled
UCHAR SerNumEnable7; // non-zero if serial number to be used
UCHAR ALSlowSlew; // non-zero if AL pins have slow slew
UCHAR ALSchmittInput; // non-zero if AL pins are Schmitt input
UCHAR ALDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR AHSlowSlew; // non-zero if AH pins have slow slew
UCHAR AHSchmittInput; // non-zero if AH pins are Schmitt input
UCHAR AHDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR BLSlowSlew; // non-zero if BL pins have slow slew
UCHAR BLSchmittInput; // non-zero if BL pins are Schmitt input
UCHAR BLDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR BHSlowSlew; // non-zero if BH pins have slow slew
UCHAR BHSchmittInput; // non-zero if BH pins are Schmitt input
UCHAR BHDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR IFAIsFifo7; // non-zero if interface is 245 FIFO
UCHAR IFAIsFifoTar7; // non-zero if interface is 245 FIFO CPU target
UCHAR IFAIsFastSer7; // non-zero if interface is Fast serial
UCHAR AIsVCP7; // non-zero if interface is to use VCP drivers
UCHAR IFBIsFifo7; // non-zero if interface is 245 FIFO
UCHAR IFBIsFifoTar7; // non-zero if interface is 245 FIFO CPU target
UCHAR IFBIsFastSer7; // non-zero if interface is Fast serial
UCHAR BIsVCP7; // non-zero if interface is to use VCP drivers
UCHAR PowerSaveEnable; // non-zero if using BCBUS7 to save power for self-powered designs
//
// Rev 8 (FT4232H) Extensions
//
UCHAR PullDownEnable8; // non-zero if pull down enabled
UCHAR SerNumEnable8; // non-zero if serial number to be used
UCHAR ASlowSlew; // non-zero if A pins have slow slew
UCHAR ASchmittInput; // non-zero if A pins are Schmitt input
UCHAR ADriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR BSlowSlew; // non-zero if B pins have slow slew
UCHAR BSchmittInput; // non-zero if B pins are Schmitt input
UCHAR BDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR CSlowSlew; // non-zero if C pins have slow slew
UCHAR CSchmittInput; // non-zero if C pins are Schmitt input
UCHAR CDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR DSlowSlew; // non-zero if D pins have slow slew
UCHAR DSchmittInput; // non-zero if D pins are Schmitt input
UCHAR DDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR ARIIsTXDEN; // non-zero if port A uses RI as RS485 TXDEN
UCHAR BRIIsTXDEN; // non-zero if port B uses RI as RS485 TXDEN
UCHAR CRIIsTXDEN; // non-zero if port C uses RI as RS485 TXDEN
UCHAR DRIIsTXDEN; // non-zero if port D uses RI as RS485 TXDEN
UCHAR AIsVCP8; // non-zero if interface is to use VCP drivers
UCHAR BIsVCP8; // non-zero if interface is to use VCP drivers
UCHAR CIsVCP8; // non-zero if interface is to use VCP drivers
UCHAR DIsVCP8; // non-zero if interface is to use VCP drivers
//
// Rev 9 (FT232H) Extensions
//
UCHAR PullDownEnableH; // non-zero if pull down enabled
UCHAR SerNumEnableH; // non-zero if serial number to be used
UCHAR ACSlowSlewH; // non-zero if AC pins have slow slew
UCHAR ACSchmittInputH; // non-zero if AC pins are Schmitt input
UCHAR ACDriveCurrentH; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR ADSlowSlewH; // non-zero if AD pins have slow slew
UCHAR ADSchmittInputH; // non-zero if AD pins are Schmitt input
UCHAR ADDriveCurrentH; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR Cbus0H; // Cbus Mux control
UCHAR Cbus1H; // Cbus Mux control
UCHAR Cbus2H; // Cbus Mux control
UCHAR Cbus3H; // Cbus Mux control
UCHAR Cbus4H; // Cbus Mux control
UCHAR Cbus5H; // Cbus Mux control
UCHAR Cbus6H; // Cbus Mux control
UCHAR Cbus7H; // Cbus Mux control
UCHAR Cbus8H; // Cbus Mux control
UCHAR Cbus9H; // Cbus Mux control
UCHAR IsFifoH; // non-zero if interface is 245 FIFO
UCHAR IsFifoTarH; // non-zero if interface is 245 FIFO CPU target
UCHAR IsFastSerH; // non-zero if interface is Fast serial
UCHAR IsFT1248H; // non-zero if interface is FT1248
UCHAR FT1248CpolH; // FT1248 clock polarity - clock idle high (1) or clock idle low (0)
UCHAR FT1248LsbH; // FT1248 data is LSB (1) or MSB (0)
UCHAR FT1248FlowControlH; // FT1248 flow control enable
UCHAR IsVCPH; // non-zero if interface is to use VCP drivers
UCHAR PowerSaveEnableH; // non-zero if using ACBUS7 to save power for self-powered designs
} FT_PROGRAM_DATA, *PFT_PROGRAM_DATA;
 
FTD2XX_API
FT_STATUS WINAPI FT_EE_Program(
FT_HANDLE ftHandle,
PFT_PROGRAM_DATA pData
);
 
FTD2XX_API
FT_STATUS WINAPI FT_EE_ProgramEx(
FT_HANDLE ftHandle,
PFT_PROGRAM_DATA pData,
char *Manufacturer,
char *ManufacturerId,
char *Description,
char *SerialNumber
);
 
FTD2XX_API
FT_STATUS WINAPI FT_EE_Read(
FT_HANDLE ftHandle,
PFT_PROGRAM_DATA pData
);
 
FTD2XX_API
FT_STATUS WINAPI FT_EE_ReadEx(
FT_HANDLE ftHandle,
PFT_PROGRAM_DATA pData,
char *Manufacturer,
char *ManufacturerId,
char *Description,
char *SerialNumber
);
 
FTD2XX_API
FT_STATUS WINAPI FT_EE_UASize(
FT_HANDLE ftHandle,
LPDWORD lpdwSize
);
 
FTD2XX_API
FT_STATUS WINAPI FT_EE_UAWrite(
FT_HANDLE ftHandle,
PUCHAR pucData,
DWORD dwDataLen
);
 
FTD2XX_API
FT_STATUS WINAPI FT_EE_UARead(
FT_HANDLE ftHandle,
PUCHAR pucData,
DWORD dwDataLen,
LPDWORD lpdwBytesRead
);
 
 
typedef struct ft_eeprom_header {
FT_DEVICE deviceType; // FTxxxx device type to be programmed
// Device descriptor options
WORD VendorId; // 0x0403
WORD ProductId; // 0x6001
UCHAR SerNumEnable; // non-zero if serial number to be used
// Config descriptor options
WORD MaxPower; // 0 < MaxPower <= 500
UCHAR SelfPowered; // 0 = bus powered, 1 = self powered
UCHAR RemoteWakeup; // 0 = not capable, 1 = capable
// Hardware options
UCHAR PullDownEnable; // non-zero if pull down in suspend enabled
} FT_EEPROM_HEADER, *PFT_EEPROM_HEADER;
 
 
// FT232B EEPROM structure for use with FT_EEPROM_Read and FT_EEPROM_Program
typedef struct ft_eeprom_232b {
// Common header
FT_EEPROM_HEADER common; // common elements for all device EEPROMs
} FT_EEPROM_232B, *PFT_EEPROM_232B;
 
 
// FT2232 EEPROM structure for use with FT_EEPROM_Read and FT_EEPROM_Program
typedef struct ft_eeprom_2232 {
// Common header
FT_EEPROM_HEADER common; // common elements for all device EEPROMs
// Drive options
UCHAR AIsHighCurrent; // non-zero if interface is high current
UCHAR BIsHighCurrent; // non-zero if interface is high current
// Hardware options
UCHAR AIsFifo; // non-zero if interface is 245 FIFO
UCHAR AIsFifoTar; // non-zero if interface is 245 FIFO CPU target
UCHAR AIsFastSer; // non-zero if interface is Fast serial
UCHAR BIsFifo; // non-zero if interface is 245 FIFO
UCHAR BIsFifoTar; // non-zero if interface is 245 FIFO CPU target
UCHAR BIsFastSer; // non-zero if interface is Fast serial
// Driver option
UCHAR ADriverType; //
UCHAR BDriverType; //
} FT_EEPROM_2232, *PFT_EEPROM_2232;
 
 
// FT232R EEPROM structure for use with FT_EEPROM_Read and FT_EEPROM_Program
typedef struct ft_eeprom_232r {
// Common header
FT_EEPROM_HEADER common; // common elements for all device EEPROMs
// Drive options
UCHAR IsHighCurrent; // non-zero if interface is high current
// Hardware options
UCHAR UseExtOsc; // Use External Oscillator
UCHAR InvertTXD; // non-zero if invert TXD
UCHAR InvertRXD; // non-zero if invert RXD
UCHAR InvertRTS; // non-zero if invert RTS
UCHAR InvertCTS; // non-zero if invert CTS
UCHAR InvertDTR; // non-zero if invert DTR
UCHAR InvertDSR; // non-zero if invert DSR
UCHAR InvertDCD; // non-zero if invert DCD
UCHAR InvertRI; // non-zero if invert RI
UCHAR Cbus0; // Cbus Mux control
UCHAR Cbus1; // Cbus Mux control
UCHAR Cbus2; // Cbus Mux control
UCHAR Cbus3; // Cbus Mux control
UCHAR Cbus4; // Cbus Mux control
// Driver option
UCHAR DriverType; //
} FT_EEPROM_232R, *PFT_EEPROM_232R;
 
 
// FT2232H EEPROM structure for use with FT_EEPROM_Read and FT_EEPROM_Program
typedef struct ft_eeprom_2232h {
// Common header
FT_EEPROM_HEADER common; // common elements for all device EEPROMs
// Drive options
UCHAR ALSlowSlew; // non-zero if AL pins have slow slew
UCHAR ALSchmittInput; // non-zero if AL pins are Schmitt input
UCHAR ALDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR AHSlowSlew; // non-zero if AH pins have slow slew
UCHAR AHSchmittInput; // non-zero if AH pins are Schmitt input
UCHAR AHDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR BLSlowSlew; // non-zero if BL pins have slow slew
UCHAR BLSchmittInput; // non-zero if BL pins are Schmitt input
UCHAR BLDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR BHSlowSlew; // non-zero if BH pins have slow slew
UCHAR BHSchmittInput; // non-zero if BH pins are Schmitt input
UCHAR BHDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
// Hardware options
UCHAR AIsFifo; // non-zero if interface is 245 FIFO
UCHAR AIsFifoTar; // non-zero if interface is 245 FIFO CPU target
UCHAR AIsFastSer; // non-zero if interface is Fast serial
UCHAR BIsFifo; // non-zero if interface is 245 FIFO
UCHAR BIsFifoTar; // non-zero if interface is 245 FIFO CPU target
UCHAR BIsFastSer; // non-zero if interface is Fast serial
UCHAR PowerSaveEnable; // non-zero if using BCBUS7 to save power for self-powered designs
// Driver option
UCHAR ADriverType; //
UCHAR BDriverType; //
} FT_EEPROM_2232H, *PFT_EEPROM_2232H;
 
 
// FT4232H EEPROM structure for use with FT_EEPROM_Read and FT_EEPROM_Program
typedef struct ft_eeprom_4232h {
// Common header
FT_EEPROM_HEADER common; // common elements for all device EEPROMs
// Drive options
UCHAR ASlowSlew; // non-zero if A pins have slow slew
UCHAR ASchmittInput; // non-zero if A pins are Schmitt input
UCHAR ADriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR BSlowSlew; // non-zero if B pins have slow slew
UCHAR BSchmittInput; // non-zero if B pins are Schmitt input
UCHAR BDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR CSlowSlew; // non-zero if C pins have slow slew
UCHAR CSchmittInput; // non-zero if C pins are Schmitt input
UCHAR CDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR DSlowSlew; // non-zero if D pins have slow slew
UCHAR DSchmittInput; // non-zero if D pins are Schmitt input
UCHAR DDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
// Hardware options
UCHAR ARIIsTXDEN; // non-zero if port A uses RI as RS485 TXDEN
UCHAR BRIIsTXDEN; // non-zero if port B uses RI as RS485 TXDEN
UCHAR CRIIsTXDEN; // non-zero if port C uses RI as RS485 TXDEN
UCHAR DRIIsTXDEN; // non-zero if port D uses RI as RS485 TXDEN
// Driver option
UCHAR ADriverType; //
UCHAR BDriverType; //
UCHAR CDriverType; //
UCHAR DDriverType; //
} FT_EEPROM_4232H, *PFT_EEPROM_4232H;
 
 
// FT232H EEPROM structure for use with FT_EEPROM_Read and FT_EEPROM_Program
typedef struct ft_eeprom_232h {
// Common header
FT_EEPROM_HEADER common; // common elements for all device EEPROMs
// Drive options
UCHAR ACSlowSlew; // non-zero if AC bus pins have slow slew
UCHAR ACSchmittInput; // non-zero if AC bus pins are Schmitt input
UCHAR ACDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR ADSlowSlew; // non-zero if AD bus pins have slow slew
UCHAR ADSchmittInput; // non-zero if AD bus pins are Schmitt input
UCHAR ADDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
// CBUS options
UCHAR Cbus0; // Cbus Mux control
UCHAR Cbus1; // Cbus Mux control
UCHAR Cbus2; // Cbus Mux control
UCHAR Cbus3; // Cbus Mux control
UCHAR Cbus4; // Cbus Mux control
UCHAR Cbus5; // Cbus Mux control
UCHAR Cbus6; // Cbus Mux control
UCHAR Cbus7; // Cbus Mux control
UCHAR Cbus8; // Cbus Mux control
UCHAR Cbus9; // Cbus Mux control
// FT1248 options
UCHAR FT1248Cpol; // FT1248 clock polarity - clock idle high (1) or clock idle low (0)
UCHAR FT1248Lsb; // FT1248 data is LSB (1) or MSB (0)
UCHAR FT1248FlowControl; // FT1248 flow control enable
// Hardware options
UCHAR IsFifo; // non-zero if interface is 245 FIFO
UCHAR IsFifoTar; // non-zero if interface is 245 FIFO CPU target
UCHAR IsFastSer; // non-zero if interface is Fast serial
UCHAR IsFT1248 ; // non-zero if interface is FT1248
UCHAR PowerSaveEnable; //
// Driver option
UCHAR DriverType; //
} FT_EEPROM_232H, *PFT_EEPROM_232H;
 
 
// FT X Series EEPROM structure for use with FT_EEPROM_Read and FT_EEPROM_Program
typedef struct ft_eeprom_x_series {
// Common header
FT_EEPROM_HEADER common; // common elements for all device EEPROMs
// Drive options
UCHAR ACSlowSlew; // non-zero if AC bus pins have slow slew
UCHAR ACSchmittInput; // non-zero if AC bus pins are Schmitt input
UCHAR ACDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
UCHAR ADSlowSlew; // non-zero if AD bus pins have slow slew
UCHAR ADSchmittInput; // non-zero if AD bus pins are Schmitt input
UCHAR ADDriveCurrent; // valid values are 4mA, 8mA, 12mA, 16mA
// CBUS options
UCHAR Cbus0; // Cbus Mux control
UCHAR Cbus1; // Cbus Mux control
UCHAR Cbus2; // Cbus Mux control
UCHAR Cbus3; // Cbus Mux control
UCHAR Cbus4; // Cbus Mux control
UCHAR Cbus5; // Cbus Mux control
UCHAR Cbus6; // Cbus Mux control
// UART signal options
UCHAR InvertTXD; // non-zero if invert TXD
UCHAR InvertRXD; // non-zero if invert RXD
UCHAR InvertRTS; // non-zero if invert RTS
UCHAR InvertCTS; // non-zero if invert CTS
UCHAR InvertDTR; // non-zero if invert DTR
UCHAR InvertDSR; // non-zero if invert DSR
UCHAR InvertDCD; // non-zero if invert DCD
UCHAR InvertRI; // non-zero if invert RI
// Battery Charge Detect options
UCHAR BCDEnable; // Enable Battery Charger Detection
UCHAR BCDForceCbusPWREN; // asserts the power enable signal on CBUS when charging port detected
UCHAR BCDDisableSleep; // forces the device never to go into sleep mode
// I2C options
WORD I2CSlaveAddress; // I2C slave device address
DWORD I2CDeviceId; // I2C device ID
UCHAR I2CDisableSchmitt; // Disable I2C Schmitt trigger
// FT1248 options
UCHAR FT1248Cpol; // FT1248 clock polarity - clock idle high (1) or clock idle low (0)
UCHAR FT1248Lsb; // FT1248 data is LSB (1) or MSB (0)
UCHAR FT1248FlowControl; // FT1248 flow control enable
// Hardware options
UCHAR RS485EchoSuppress; //
UCHAR PowerSaveEnable; //
// Driver option
UCHAR DriverType; //
} FT_EEPROM_X_SERIES, *PFT_EEPROM_X_SERIES;
 
 
FTD2XX_API
FT_STATUS WINAPI FT_EEPROM_Read(
FT_HANDLE ftHandle,
void *eepromData,
DWORD eepromDataSize,
char *Manufacturer,
char *ManufacturerId,
char *Description,
char *SerialNumber
);
 
 
FTD2XX_API
FT_STATUS WINAPI FT_EEPROM_Program(
FT_HANDLE ftHandle,
void *eepromData,
DWORD eepromDataSize,
char *Manufacturer,
char *ManufacturerId,
char *Description,
char *SerialNumber
);
 
 
FTD2XX_API
FT_STATUS WINAPI FT_SetLatencyTimer(
FT_HANDLE ftHandle,
UCHAR ucLatency
);
 
FTD2XX_API
FT_STATUS WINAPI FT_GetLatencyTimer(
FT_HANDLE ftHandle,
PUCHAR pucLatency
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetBitMode(
FT_HANDLE ftHandle,
UCHAR ucMask,
UCHAR ucEnable
);
 
FTD2XX_API
FT_STATUS WINAPI FT_GetBitMode(
FT_HANDLE ftHandle,
PUCHAR pucMode
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetUSBParameters(
FT_HANDLE ftHandle,
ULONG ulInTransferSize,
ULONG ulOutTransferSize
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetDeadmanTimeout(
FT_HANDLE ftHandle,
ULONG ulDeadmanTimeout
);
 
#ifndef _WIN32
// Extra functions for non-Windows platforms to compensate
// for lack of .INF file to specify Vendor and Product IDs.
 
FTD2XX_API
FT_STATUS FT_SetVIDPID(
DWORD dwVID,
DWORD dwPID
);
FTD2XX_API
FT_STATUS FT_GetVIDPID(
DWORD * pdwVID,
DWORD * pdwPID
);
 
FTD2XX_API
FT_STATUS WINAPI FT_GetDeviceLocId(
FT_HANDLE ftHandle,
LPDWORD lpdwLocId
);
#endif // _WIN32
 
FTD2XX_API
FT_STATUS WINAPI FT_GetDeviceInfo(
FT_HANDLE ftHandle,
FT_DEVICE *lpftDevice,
LPDWORD lpdwID,
PCHAR SerialNumber,
PCHAR Description,
LPVOID Dummy
);
 
FTD2XX_API
FT_STATUS WINAPI FT_StopInTask(
FT_HANDLE ftHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_RestartInTask(
FT_HANDLE ftHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_SetResetPipeRetryCount(
FT_HANDLE ftHandle,
DWORD dwCount
);
 
FTD2XX_API
FT_STATUS WINAPI FT_ResetPort(
FT_HANDLE ftHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_CyclePort(
FT_HANDLE ftHandle
);
 
 
//
// Win32-type functions
//
 
FTD2XX_API
FT_HANDLE WINAPI FT_W32_CreateFile(
LPCTSTR lpszName,
DWORD dwAccess,
DWORD dwShareMode,
LPSECURITY_ATTRIBUTES lpSecurityAttributes,
DWORD dwCreate,
DWORD dwAttrsAndFlags,
HANDLE hTemplate
);
 
FTD2XX_API
BOOL WINAPI FT_W32_CloseHandle(
FT_HANDLE ftHandle
);
 
FTD2XX_API
BOOL WINAPI FT_W32_ReadFile(
FT_HANDLE ftHandle,
LPVOID lpBuffer,
DWORD nBufferSize,
LPDWORD lpBytesReturned,
LPOVERLAPPED lpOverlapped
);
 
FTD2XX_API
BOOL WINAPI FT_W32_WriteFile(
FT_HANDLE ftHandle,
LPVOID lpBuffer,
DWORD nBufferSize,
LPDWORD lpBytesWritten,
LPOVERLAPPED lpOverlapped
);
 
FTD2XX_API
DWORD WINAPI FT_W32_GetLastError(
FT_HANDLE ftHandle
);
 
FTD2XX_API
BOOL WINAPI FT_W32_GetOverlappedResult(
FT_HANDLE ftHandle,
LPOVERLAPPED lpOverlapped,
LPDWORD lpdwBytesTransferred,
BOOL bWait
);
 
FTD2XX_API
BOOL WINAPI FT_W32_CancelIo(
FT_HANDLE ftHandle
);
 
 
//
// Win32 COMM API type functions
//
typedef struct _FTCOMSTAT {
DWORD fCtsHold : 1;
DWORD fDsrHold : 1;
DWORD fRlsdHold : 1;
DWORD fXoffHold : 1;
DWORD fXoffSent : 1;
DWORD fEof : 1;
DWORD fTxim : 1;
DWORD fReserved : 25;
DWORD cbInQue;
DWORD cbOutQue;
} FTCOMSTAT, *LPFTCOMSTAT;
 
typedef struct _FTDCB {
DWORD DCBlength; /* sizeof(FTDCB) */
DWORD BaudRate; /* Baudrate at which running */
DWORD fBinary: 1; /* Binary Mode (skip EOF check) */
DWORD fParity: 1; /* Enable parity checking */
DWORD fOutxCtsFlow:1; /* CTS handshaking on output */
DWORD fOutxDsrFlow:1; /* DSR handshaking on output */
DWORD fDtrControl:2; /* DTR Flow control */
DWORD fDsrSensitivity:1; /* DSR Sensitivity */
DWORD fTXContinueOnXoff: 1; /* Continue TX when Xoff sent */
DWORD fOutX: 1; /* Enable output X-ON/X-OFF */
DWORD fInX: 1; /* Enable input X-ON/X-OFF */
DWORD fErrorChar: 1; /* Enable Err Replacement */
DWORD fNull: 1; /* Enable Null stripping */
DWORD fRtsControl:2; /* Rts Flow control */
DWORD fAbortOnError:1; /* Abort all reads and writes on Error */
DWORD fDummy2:17; /* Reserved */
WORD wReserved; /* Not currently used */
WORD XonLim; /* Transmit X-ON threshold */
WORD XoffLim; /* Transmit X-OFF threshold */
BYTE ByteSize; /* Number of bits/byte, 4-8 */
BYTE Parity; /* 0-4=None,Odd,Even,Mark,Space */
BYTE StopBits; /* FT_STOP_BITS_1 or FT_STOP_BITS_2 */
char XonChar; /* Tx and Rx X-ON character */
char XoffChar; /* Tx and Rx X-OFF character */
char ErrorChar; /* Error replacement char */
char EofChar; /* End of Input character */
char EvtChar; /* Received Event character */
WORD wReserved1; /* Fill for now. */
} FTDCB, *LPFTDCB;
 
typedef struct _FTTIMEOUTS {
DWORD ReadIntervalTimeout; /* Maximum time between read chars. */
DWORD ReadTotalTimeoutMultiplier; /* Multiplier of characters. */
DWORD ReadTotalTimeoutConstant; /* Constant in milliseconds. */
DWORD WriteTotalTimeoutMultiplier; /* Multiplier of characters. */
DWORD WriteTotalTimeoutConstant; /* Constant in milliseconds. */
} FTTIMEOUTS,*LPFTTIMEOUTS;
 
 
FTD2XX_API
BOOL WINAPI FT_W32_ClearCommBreak(
FT_HANDLE ftHandle
);
 
FTD2XX_API
BOOL WINAPI FT_W32_ClearCommError(
FT_HANDLE ftHandle,
LPDWORD lpdwErrors,
LPFTCOMSTAT lpftComstat
);
 
FTD2XX_API
BOOL WINAPI FT_W32_EscapeCommFunction(
FT_HANDLE ftHandle,
DWORD dwFunc
);
 
FTD2XX_API
BOOL WINAPI FT_W32_GetCommModemStatus(
FT_HANDLE ftHandle,
LPDWORD lpdwModemStatus
);
 
FTD2XX_API
BOOL WINAPI FT_W32_GetCommState(
FT_HANDLE ftHandle,
LPFTDCB lpftDcb
);
 
FTD2XX_API
BOOL WINAPI FT_W32_GetCommTimeouts(
FT_HANDLE ftHandle,
FTTIMEOUTS *pTimeouts
);
 
FTD2XX_API
BOOL WINAPI FT_W32_PurgeComm(
FT_HANDLE ftHandle,
DWORD dwMask
);
 
FTD2XX_API
BOOL WINAPI FT_W32_SetCommBreak(
FT_HANDLE ftHandle
);
 
FTD2XX_API
BOOL WINAPI FT_W32_SetCommMask(
FT_HANDLE ftHandle,
ULONG ulEventMask
);
 
FTD2XX_API
BOOL WINAPI FT_W32_GetCommMask(
FT_HANDLE ftHandle,
LPDWORD lpdwEventMask
);
 
FTD2XX_API
BOOL WINAPI FT_W32_SetCommState(
FT_HANDLE ftHandle,
LPFTDCB lpftDcb
);
 
FTD2XX_API
BOOL WINAPI FT_W32_SetCommTimeouts(
FT_HANDLE ftHandle,
FTTIMEOUTS *pTimeouts
);
 
FTD2XX_API
BOOL WINAPI FT_W32_SetupComm(
FT_HANDLE ftHandle,
DWORD dwReadBufferSize,
DWORD dwWriteBufferSize
);
 
FTD2XX_API
BOOL WINAPI FT_W32_WaitCommEvent(
FT_HANDLE ftHandle,
PULONG pulEvent,
LPOVERLAPPED lpOverlapped
);
 
 
//
// Device information
//
 
typedef struct _ft_device_list_info_node {
ULONG Flags;
ULONG Type;
ULONG ID;
DWORD LocId;
char SerialNumber[16];
char Description[64];
FT_HANDLE ftHandle;
} FT_DEVICE_LIST_INFO_NODE;
 
// Device information flags
enum {
FT_FLAGS_OPENED = 1,
FT_FLAGS_HISPEED = 2
};
 
 
FTD2XX_API
FT_STATUS WINAPI FT_CreateDeviceInfoList(
LPDWORD lpdwNumDevs
);
 
FTD2XX_API
FT_STATUS WINAPI FT_GetDeviceInfoList(
FT_DEVICE_LIST_INFO_NODE *pDest,
LPDWORD lpdwNumDevs
);
 
FTD2XX_API
FT_STATUS WINAPI FT_GetDeviceInfoDetail(
DWORD dwIndex,
LPDWORD lpdwFlags,
LPDWORD lpdwType,
LPDWORD lpdwID,
LPDWORD lpdwLocId,
LPVOID lpSerialNumber,
LPVOID lpDescription,
FT_HANDLE *pftHandle
);
 
 
//
// Version information
//
 
FTD2XX_API
FT_STATUS WINAPI FT_GetDriverVersion(
FT_HANDLE ftHandle,
LPDWORD lpdwVersion
);
 
FTD2XX_API
FT_STATUS WINAPI FT_GetLibraryVersion(
LPDWORD lpdwVersion
);
 
 
FTD2XX_API
FT_STATUS WINAPI FT_Rescan(
void
);
 
FTD2XX_API
FT_STATUS WINAPI FT_Reload(
WORD wVid,
WORD wPid
);
 
FTD2XX_API
FT_STATUS WINAPI FT_GetComPortNumber(
FT_HANDLE ftHandle,
LPLONG lpdwComPortNumber
);
 
 
//
// FT232H additional EEPROM functions
//
 
FTD2XX_API
FT_STATUS WINAPI FT_EE_ReadConfig(
FT_HANDLE ftHandle,
UCHAR ucAddress,
PUCHAR pucValue
);
 
FTD2XX_API
FT_STATUS WINAPI FT_EE_WriteConfig(
FT_HANDLE ftHandle,
UCHAR ucAddress,
UCHAR ucValue
);
 
FTD2XX_API
FT_STATUS WINAPI FT_EE_ReadECC(
FT_HANDLE ftHandle,
UCHAR ucOption,
LPWORD lpwValue
);
 
FTD2XX_API
FT_STATUS WINAPI FT_GetQueueStatusEx(
FT_HANDLE ftHandle,
DWORD *dwRxBytes
);
 
FTD2XX_API
FT_STATUS WINAPI FT_ComPortIdle(
FT_HANDLE ftHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_ComPortCancelIdle(
FT_HANDLE ftHandle
);
 
FTD2XX_API
FT_STATUS WINAPI FT_VendorCmdGet(
FT_HANDLE ftHandle,
UCHAR Request,
UCHAR *Buf,
USHORT Len
);
 
FTD2XX_API
FT_STATUS WINAPI FT_VendorCmdSet(
FT_HANDLE ftHandle,
UCHAR Request,
UCHAR *Buf,
USHORT Len
);
 
FTD2XX_API
FT_STATUS WINAPI FT_VendorCmdGetEx(
FT_HANDLE ftHandle,
USHORT wValue,
UCHAR *Buf,
USHORT Len
);
 
FTD2XX_API
FT_STATUS WINAPI FT_VendorCmdSetEx(
FT_HANDLE ftHandle,
USHORT wValue,
UCHAR *Buf,
USHORT Len
);
 
#ifdef __cplusplus
}
#endif
 
 
#endif /* FTD2XX_H */
 
/cvi/instr/FTD2xx/ftd2xx.lib
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Property changes:
Added: svn:mime-type
## -0,0 +1 ##
+application/octet-stream
\ No newline at end of property
Index: instr/FTD2xx/ftd2xxd.c
===================================================================
--- instr/FTD2xx/ftd2xxd.c (nonexistent)
+++ instr/FTD2xx/ftd2xxd.c (revision 153)
@@ -0,0 +1,159 @@
+#include <ansi_c.h>
+#include <cvirte.h>
+#include "ftd2xx.h"
+#include <utility.h>
+
+int __stdcall WinMain (HINSTANCE hInstance, HINSTANCE hPrevInstance,
+ LPSTR lpszCmdLine, int nCmdShow) {
+
+ BYTE bufOut[1024],bufIn[1024];
+ DWORD bToSend, bSent, bToReceive, bReceived;
+ DWORD dwClockDivisor=29;//Value of clock divisor, SCL Frequency = 60/((1+29)*2) (MHz) = 1Mhz
+ DWORD numDevs;
+ DWORD Flags;
+ DWORD ID;
+ DWORD Type;
+ DWORD LocId;
+ char SerialNumber[16];
+ char Description[64];
+ FT_STATUS ftStatus;
+ FT_HANDLE ftHandle,ftHandleTemp;
+ FT_DEVICE_LIST_INFO_NODE *devInfo;
+
+ if (InitCVIRTE (hInstance, 0, 0) == 0)
+ return -1; /* out of memory */
+// create the device information list
+ ftStatus = FT_CreateDeviceInfoList(&numDevs);
+ if (ftStatus == FT_OK) {
+ printf("Number of devices is %d\n",numDevs);
+ }
+ if (numDevs > 0) {
+// allocate storage for list based on numDevs
+ devInfo = (FT_DEVICE_LIST_INFO_NODE*)malloc(sizeof(FT_DEVICE_LIST_INFO_NODE)*numDevs);
+// get the device information list
+ ftStatus = FT_GetDeviceInfoList(devInfo,&numDevs);
+ if (ftStatus == FT_OK) {
+ for (int i = 0; i < numDevs; i++) {
+ printf("Dev %d:\n",i);
+ printf(" Flags=0x%x\n",devInfo[i].Flags);
+ printf(" Type=0x%x\n",devInfo[i].Type);
+ printf(" ID=0x%x\n",devInfo[i].ID);
+ printf(" LocId=0x%x\n",devInfo[i].LocId);
+ printf(" SerialNumber=%s\n",devInfo[i].SerialNumber);
+ printf(" Description=%s\n",devInfo[i].Description);
+ printf(" ftHandle=0x%x\n",devInfo[i].ftHandle);
+ }
+ }
+// get information for device 0
+/*
+ ftStatus = FT_GetDeviceInfoDetail(0, &Flags, &Type, &ID, &LocId, SerialNumber, Description, &ftHandleTemp);
+ if (ftStatus == FT_OK) {
+ printf("Dev 0:\n");
+ printf(" Flags=0x%x\n",Flags);
+ printf(" Type=0x%x\n",Type);
+ printf(" ID=0x%x\n",ID);
+ printf(" LocId=0x%x\n",LocId);
+ printf(" SerialNumber=%s\n",SerialNumber);
+ printf(" Description=%s\n",Description);
+ printf(" ftHandle=0x%x\n",ftHandleTemp);
+ }
+*/
+ }
+ ftStatus = FT_Open(0,&ftHandle);
+ if (ftStatus != FT_OK) {
+ printf("Can't open FT232H device! \n");
+ return 1;
+ } else // Port opened successfully
+ printf("Successfully open FT2232H device! \n");
+
+// reset device
+ ftStatus = FT_ResetDevice(ftHandle);
+//Purge USB receive buffer first by reading out all old data from FT232H receive buffer
+ ftStatus |= FT_GetQueueStatus(ftHandle, &bToReceive); // Get the number of bytes in the FT232H receive buffer
+ if ((ftStatus == FT_OK) && (bToReceive > 0))
+ ftStatus |= FT_Read(ftHandle, bufIn, bToReceive, &bReceived); //Read out the data from FT232H receive buffer
+ ftStatus |= FT_SetUSBParameters(ftHandle, 65535, 65535); //Set USB request transfer size
+ ftStatus |= FT_SetChars(ftHandle, FALSE, 0, FALSE, 0); //Disable event and error characters
+ ftStatus |= FT_SetTimeouts(ftHandle, 3000, 3000); //Sets the read and write timeouts in 3 sec for the FT232H
+ ftStatus |= FT_SetLatencyTimer(ftHandle, 1); //Set the latency timer
+ ftStatus |= FT_SetBitMode(ftHandle, 0x0, 0x00); //Reset controller
+ ftStatus |= FT_SetBitMode(ftHandle, 0x0, 0x02); //Enable MPSSE mode
+ if (ftStatus != FT_OK) {
+ printf("fail on initialize FT2232H device ! \n");
+ return FALSE;
+ }
+ Sleep(50); // Wait 50ms for all the USB stuff to complete and work
+
+// test communication by sending bad command 0xAA
+ bToSend=0;
+ bufOut[bToSend++]=0xAA;
+ ftStatus = FT_Write(ftHandle, bufOut, bToSend, &bSent);
+ do{
+ ftStatus = FT_GetQueueStatus(ftHandle, &bToReceive); // Get the number of bytes in the device input buffer
+ }while ((bToReceive == 0) && (ftStatus == FT_OK)); //or Timeout
+ ftStatus = FT_Read(ftHandle, bufIn, bToReceive, &bReceived); //Read out the data from input buffer
+ printf("Received byts: %d",bReceived);
+ if (bReceived > 1) printf(": 0x%02X, 0x%02X",bufIn[bReceived-2],bufIn[bReceived-1]);
+ printf("\n");
+
+ bToSend=0;
+ bufOut[bToSend++]=0xAB;
+ ftStatus = FT_Write(ftHandle, bufOut, bToSend, &bSent);
+ do{
+ ftStatus = FT_GetQueueStatus(ftHandle, &bToReceive); // Get the number of bytes in the device input buffer
+ }while ((bToReceive == 0) && (ftStatus == FT_OK)); //or Timeout
+ ftStatus = FT_Read(ftHandle, bufIn, bToReceive, &bReceived); //Read out the data from input buffer
+ printf("Received bytes: %d",bReceived);
+ if (bReceived > 1) printf(": 0x%02X, 0x%02X",bufIn[bReceived-2],bufIn[bReceived-1]);
+ printf("\n");
+
+ bToSend=0;
+ bufOut[bToSend++]=0x8A;//Ensure disable clock divide by 5 for 60Mhz master clock
+ bufOut[bToSend++]=0x97;//Ensure turn off adaptive clocking
+ bufOut[bToSend++]=0x8D;//disable 3 phase data clock
+ ftStatus = FT_Write(ftHandle, bufOut, bToSend, &bSent);
+
+ bToSend = 0;
+ bufOut[bToSend++]=0x80; //Command to set directions of lower 8 pins and force value on bits set as output
+ bufOut[bToSend++]=0x00; //Set SDA, SCL high, WP disabled by SK, DO at bit &*, GPIOL0 at bit &*
+ bufOut[bToSend++]=0x0B; //Set SK,DO,GPIOL0 pins as output with bit **, other pins as input with bit &*
+// The SK clock frequency can be worked out by below algorithm with divide by 5 set as off
+// SK frequency = 60MHz /((1 + [(1 +0xValueH*256) OR 0xValueL])*2)
+ bufOut[bToSend++]=0x86; //Command to set clock divisor
+ bufOut[bToSend++]=dwClockDivisor & 0xFF; //Set 0xValueL of clock divisor
+ bufOut[bToSend++]=dwClockDivisor >> 8; //Set 0xValueH of clock divisor
+ ftStatus = FT_Write(ftHandle, bufOut, bToSend, &bSent); // Send out the commands
+ Sleep(20); //Delay for a while
+//Turn off loop back in case
+ bToSend = 0;
+ bufOut[bToSend++]=0x85; //Command to turn off loop back of TDI/TDO connection
+ ftStatus = FT_Write(ftHandle, bufOut, bToSend, &bSent); // Send out the commands
+ Sleep(30); //Delay for a while
+ printf("SPI initialized successfuly\n");
+
+ bToSend=0;
+ bufOut[bToSend++]=0x82;// set ACBUS 0-7
+ bufOut[bToSend++]=0x00;// value
+ bufOut[bToSend++]=0x00;// direction 0-input
+ bufOut[bToSend++]=0x80;// set ADBUS 0-7
+ bufOut[bToSend++]=0xF0;
+ bufOut[bToSend++]=0xFF;
+ bufOut[bToSend++]=0x81;// read ADBUS
+ bufOut[bToSend++]=0x83;// read ACBUS
+ bufOut[bToSend++]=0x80;
+ bufOut[bToSend++]=0x00;
+ bufOut[bToSend++]=0xFF;
+ bufOut[bToSend++]=0x81;
+ bufOut[bToSend++]=0x83;
+ ftStatus = FT_Write(ftHandle, bufOut, bToSend, &bSent);
+ do{
+ ftStatus = FT_GetQueueStatus(ftHandle, &bToReceive); // Get the number of bytes in the device input buffer
+ }while ((bToReceive == 0) && (ftStatus == FT_OK)); //or Timeout
+ ftStatus = FT_Read(ftHandle, bufIn, bToReceive, &bReceived); //Read out the data from input buffer
+ printf("Received bytes: 0x%02X, 0x%02X, 0x%02X, 0x%02X\n",bufIn[0],bufIn[1],bufIn[2],bufIn[3]);
+
+ getchar();
+// Delay(10);
+ FT_Close(ftHandle);
+ return 0;
+}