/sipmScan/sipmScan_ui.uir |
---|
Cannot display: file marked as a binary type. |
svn:mime-type = application/octet-stream |
Property changes: |
Deleted: svn:mime-type |
## -1 +0,0 ## |
-application/octet-stream |
\ No newline at end of property |
Index: camac.h |
=================================================================== |
--- camac.h (revision 30) |
+++ camac.h (nonexistent) |
@@ -1,14 +0,0 @@ |
-#define BCNAF(B,C,N,A,F) 0x800000+(B)*0x80000+(C)*0x10000+(N)*0x800+(A)*0x80+(F)*0x4 |
-#define NAF(N,A,F) 0x810002+(N)*0x800+(A)*0x80+(F)*0x4 |
-#define BRF(F) 0x80E802+(F)*0x4 |
- |
-#define CSSA_R(N,A,F,DATA) VME_A24D16_R((NAF((N),(A),(F))),(DATA)) |
-#define CSSA_W(N,A,F,DATA) VME_A24D16_W((NAF((N),(A),(F))),(DATA)) |
- |
-#define CSR(DATA) VME_A24D16_R((BRF(0)),(DATA)) |
-#define BZ(DATA) VME_A24D16_W((BRF(9)),(DATA)) |
- |
-#define CCCZ(DATA) CSSA_R(28,8,26,(DATA)) |
-#define CCCC(DATA) CSSA_R(28,9,26,(DATA)) |
-#define CSET_I(DATA) CSSA_R(30,9,26,(DATA)) |
-#define CREM_I(DATA) CSSA_R(30,9,24,(DATA)) |
Index: sipmThreshold_ui.uir |
=================================================================== |
Cannot display: file marked as a binary type. |
svn:mime-type = application/octet-stream |
/sipmThreshold_ui.uir |
---|
Property changes: |
Deleted: svn:mime-type |
## -1 +0,0 ## |
-application/octet-stream |
\ No newline at end of property |
Index: sipmThreshold_ui.h |
=================================================================== |
--- sipmThreshold_ui.h (revision 30) |
+++ sipmThreshold_ui.h (nonexistent) |
@@ -1,84 +0,0 @@ |
-/**************************************************************************/ |
-/* LabWindows/CVI User Interface Resource (UIR) Include File */ |
-/* Copyright (c) National Instruments 2014. All Rights Reserved. */ |
-/* */ |
-/* WARNING: Do not add to, delete from, or otherwise modify the contents */ |
-/* of this include file. */ |
-/**************************************************************************/ |
- |
-#include <userint.h> |
- |
-#ifdef __cplusplus |
- extern "C" { |
-#endif |
- |
- /* Panels and Controls: */ |
- |
-#define P1 1 |
-#define P1_AMPDISSHTHR 2 |
-#define P1_EXIT 3 |
-#define P1_ADC 4 |
-#define P1_TDC 5 |
-#define P1_RESET 6 |
-#define P1_CEVE 7 |
-#define P1_NMIN 8 |
-#define P1_NEVE 9 |
-#define P1_FRAC 10 |
-#define P1_TDCMIN 11 |
-#define P1_PEDESTAL 12 |
-#define P1_ADCHLSAVE 13 |
-#define P1_ADCHL 14 |
-#define P1_ADCLOG 15 |
-#define P1_TDCLOG 16 |
-#define P1_TDCHL 17 |
-#define P1_DAQ 18 |
-#define P1_SUPR 19 |
-#define P1_DSAVE 20 |
-#define P1_DFILE 21 |
-#define P1_IY 22 |
-#define P1_Z 23 |
-#define P1_Y 24 |
-#define P1_YMIN 25 |
-#define P1_IX 26 |
-#define P1_YSTEP 27 |
-#define P1_X 28 |
-#define P1_NY 29 |
-#define P1_ZSET 30 |
-#define P1_XMIN 31 |
-#define P1_XSTEP 32 |
-#define P1_NX 33 |
-#define P1_MGET 34 |
-#define P1_REREAD 35 |
-#define P1_HO 36 |
-#define P1_PLCH 37 |
-#define P1_NEWF 38 |
-#define P1_REFON 39 |
-#define P1_REFRESH 40 |
-#define P1_DEBUG 41 |
-#define P1_SAMPDISSHTHR 42 |
-#define P1_STHRLOW 43 |
-#define P1_STHRUP 44 |
-#define P1_STEP 45 |
-#define P1_TIMER 46 /* callback function: cb_timer */ |
-#define P1_DECORATION 47 |
-#define P1_TEXTMSG 48 |
-#define P1_TEXTMSG_2 49 |
-#define P1_TEXTMSG_3 50 |
-#define P1_TEXTMSG_4 51 |
-#define P1_TEXTMSG_5 52 |
-#define P1_TEXTMSG_6 53 |
- |
- |
- /* Menu Bars, Menus, and Menu Items: */ |
- |
- /* (no menu bars in the resource file) */ |
- |
- |
- /* Callback Prototypes: */ |
- |
-int CVICALLBACK cb_timer(int panel, int control, int event, void *callbackData, int eventData1, int eventData2); |
- |
- |
-#ifdef __cplusplus |
- } |
-#endif |
Index: sipmScan_ui.h |
=================================================================== |
--- sipmScan_ui.h (revision 30) |
+++ sipmScan_ui.h (nonexistent) |
@@ -1,82 +0,0 @@ |
-/**************************************************************************/ |
-/* LabWindows/CVI User Interface Resource (UIR) Include File */ |
-/* Copyright (c) National Instruments 2014. All Rights Reserved. */ |
-/* */ |
-/* WARNING: Do not add to, delete from, or otherwise modify the contents */ |
-/* of this include file. */ |
-/**************************************************************************/ |
- |
-#include <userint.h> |
- |
-#ifdef __cplusplus |
- extern "C" { |
-#endif |
- |
- /* Panels and Controls: */ |
- |
-#define P1 1 |
-#define P1_AMPDISSHTHR 2 |
-#define P1_ASD8THR 3 |
-#define P1_EXIT 4 |
-#define P1_ADC 5 |
-#define P1_TDC 6 |
-#define P1_RESET 7 |
-#define P1_CEVE 8 |
-#define P1_NMIN 9 |
-#define P1_NEVE 10 |
-#define P1_FRAC 11 |
-#define P1_TDCMIN 12 |
-#define P1_PEDESTAL 13 |
-#define P1_ADCHLSAVE 14 |
-#define P1_ADCHL 15 |
-#define P1_ADCLOG 16 |
-#define P1_TDCLOG 17 |
-#define P1_TDCHL 18 |
-#define P1_DAQ 19 |
-#define P1_SUPR 20 |
-#define P1_DSAVE 21 |
-#define P1_DFILE 22 |
-#define P1_IY 23 |
-#define P1_Z 24 |
-#define P1_Y 25 |
-#define P1_YMIN 26 |
-#define P1_IX 27 |
-#define P1_YSTEP 28 |
-#define P1_X 29 |
-#define P1_NY 30 |
-#define P1_ZSET 31 |
-#define P1_XMIN 32 |
-#define P1_XSTEP 33 |
-#define P1_NX 34 |
-#define P1_MGET 35 |
-#define P1_REREAD 36 |
-#define P1_HO 37 |
-#define P1_PLCH 38 |
-#define P1_NEWF 39 |
-#define P1_REFON 40 |
-#define P1_REFRESH 41 |
-#define P1_DEBUG 42 |
-#define P1_SAMPDISSHTHR 43 |
-#define P1_SASD8THR 44 |
-#define P1_TIMER 45 /* callback function: cb_timer */ |
-#define P1_DECORATION 46 |
-#define P1_TEXTMSG 47 |
-#define P1_TEXTMSG_2 48 |
-#define P1_TEXTMSG_3 49 |
-#define P1_TEXTMSG_4 50 |
-#define P1_TEXTMSG_5 51 |
- |
- |
- /* Menu Bars, Menus, and Menu Items: */ |
- |
- /* (no menu bars in the resource file) */ |
- |
- |
- /* Callback Prototypes: */ |
- |
-int CVICALLBACK cb_timer(int panel, int control, int event, void *callbackData, int eventData1, int eventData2); |
- |
- |
-#ifdef __cplusplus |
- } |
-#endif |
Index: RTUtil.h |
=================================================================== |
--- RTUtil.h (revision 30) |
+++ RTUtil.h (nonexistent) |
@@ -1,38 +0,0 @@ |
-#ifndef __RTUtil__ |
-#define __RTUtil__ |
- |
-#include "TROOT.h" |
-#include "TCanvas.h" |
-#include "TPad.h" |
-#include "TPaveLabel.h" |
-#include "TStyle.h" |
-#include "TDatime.h" |
- |
-//########################################################################################## |
-// nastavi nastavitve izrisa, klicem z RTSetStyle(gStyle) |
-void RTSetStyle(TStyle *style); |
-//########################################################################################## |
-// poenostavi delo s TCanvas |
-class RTCanvas |
-{ |
-protected: |
- TCanvas *can; |
- TPad *pad; |
- TPaveLabel *title, *date; |
-public: |
- RTCanvas(); |
- RTCanvas(char *w_title, char *c_title, int x_min, int y_min, int x_size, int y_size); |
- |
- void Divide(int nx, int ny); |
- void Divide(int np); |
- TPad* cd(int i); |
- void SaveAs(const char *filename); |
- void Update(); |
-}; |
-//########################################################################################## |
-#include "RTUtil.cpp" |
- |
-#endif |
- |
- |
- |
Index: sipmThreshold.prj |
=================================================================== |
--- sipmThreshold.prj (nonexistent) |
+++ sipmThreshold.prj (revision 31) |
@@ -0,0 +1,279 @@ |
+[Project Header] |
+Version = 551 |
+Platform Code = 4 |
+Pathname = "/c/HOME/dino/l2d/sipmThreshold.prj" |
+CVI Dir = "/c/measurementstudio/cvi" |
+VXIplug&play Framework Dir = "/C/VXIpnp/winnt" |
+Number of Files = 9 |
+Sort Type = "No Sort" |
+Target Type = "Executable" |
+Build Configuration = "Debug" |
+Warn User If Debugging Release = 1 |
+Flags = 17 |
+Drag Bar Left = 354 |
+Window Top = 512 |
+Window Left = 688 |
+Window Bottom = 1016 |
+Window Right = 1432 |
+ |
+[File 0001] |
+File Type = "User Interface Resource" |
+Path = "/c/HOME/dino/l2d/include/sipmThreshold_ui.uir" |
+Res Id = 1 |
+Exclude = False |
+Disk Date = 3478361857 |
+Project Flags = 0 |
+Window Top = 94 |
+Window Left = 42 |
+Window Height = 903 |
+Window Width = 1174 |
+ |
+[File 0002] |
+File Type = "CSource" |
+Path = "/c/HOME/dino/l2d/src/sipmThreshold.c" |
+Res Id = 2 |
+Exclude = False |
+Disk Date = 3478362979 |
+Project Flags = 0 |
+Compile Into Object File = False |
+Object Format = "Win32-MSVC" |
+ForceCompile_Debug = False |
+ForceCompile_Release = True |
+Window Top = 109 |
+Window Left = 443 |
+Window Height = 0 |
+Window Width = 0 |
+Source Window State = "1,349,349,349,0,29,30,0,0,108,0,0,0,0,0,55,364,0,406,23," |
+Header Dependencies Line0001 = "1,2,3,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,27,29,30,31,32,3" |
+Header Dependencies Line0002 = "3,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,55,56,57,58," |
+ |
+[File 0003] |
+File Type = "Include" |
+Path = "/c/HOME/dino/l2d/include/sipmThreshold_ui.h" |
+Res Id = 3 |
+Exclude = False |
+Disk Date = 3477041806 |
+Project Flags = 0 |
+Window Top = 324 |
+Window Left = 162 |
+Window Height = 0 |
+Window Width = 0 |
+Source Window State = "1,0,0,0,0,0,0,0,0,85,0,0,0,0,0,33,0,0,0,0," |
+ |
+[File 0004] |
+File Type = "Include" |
+Path = "/c/HOME/dino/l2d/include/camac.h" |
+Res Id = 4 |
+Exclude = False |
+Disk Date = 3261990551 |
+Project Flags = 0 |
+Window Top = 0 |
+Window Left = 0 |
+Window Height = 0 |
+Window Width = 0 |
+Source Window State = "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0," |
+ |
+[File 0005] |
+File Type = "Include" |
+Path = "/c/MeasurementStudio/cvi/instr/WIENVME_DLL/wienvme_dll.h" |
+Res Id = 5 |
+Exclude = False |
+Disk Date = 3263048972 |
+Project Flags = 0 |
+Window Top = 0 |
+Window Left = 0 |
+Window Height = 0 |
+Window Width = 0 |
+Source Window State = "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0," |
+ |
+[File 0006] |
+File Type = "Function Panel" |
+Path = "/c/MeasurementStudio/cvi/instr/MIKRO/MIKRO.fp" |
+Res Id = 6 |
+Exclude = False |
+Disk Date = 3228636098 |
+Project Flags = 0 |
+Window Top = 0 |
+Window Left = 0 |
+Window Height = 0 |
+Window Width = 0 |
+ |
+[File 0007] |
+File Type = "Function Panel" |
+Path = "/c/MeasurementStudio/cvi/instr/CAENV673A/CAENV673A.fp" |
+Res Id = 7 |
+Exclude = False |
+Disk Date = 3244091108 |
+Project Flags = 0 |
+Window Top = 0 |
+Window Left = 0 |
+Window Height = 0 |
+Window Width = 0 |
+ |
+[File 0008] |
+File Type = "Function Panel" |
+Path = "/c/MeasurementStudio/cvi/instr/WIENVME_DLL/wienvme_dll.fp" |
+Res Id = 8 |
+Exclude = False |
+Disk Date = 3258260654 |
+Project Flags = 0 |
+Window Top = 0 |
+Window Left = 0 |
+Window Height = 0 |
+Window Width = 0 |
+ |
+[File 0009] |
+File Type = "Function Panel" |
+Path = "/c/MeasurementStudio/cvi/instr/CAENV462/CAENV462.fp" |
+Res Id = 9 |
+Exclude = False |
+Disk Date = 3243838534 |
+Project Flags = 0 |
+Window Top = 0 |
+Window Left = 0 |
+Window Height = 0 |
+Window Width = 0 |
+ |
+[SCC Options] |
+Use global settings = True |
+SCC Provider = "" |
+SCC Project = "" |
+Local Path = "" |
+Auxiliary Path = "" |
+Perform Same Action For .h File As For .uir File = "Ask" |
+Comment = "" |
+Username = "" |
+Use Default Comment = False |
+Use Default Username = False |
+Do Not Include PRJ File in Actions = True |
+Suppress CVI Error Messages = False |
+ |
+[Compiler Options] |
+Default Calling Convention = "cdecl" |
+Max Number Of Errors = 10 |
+Require Prototypes = True |
+Require Return Values = True |
+Enable Pointer Mismatch Warning = False |
+Enable Unreachable Code Warning = False |
+Track Include File Dependencies = True |
+Prompt For Missing Includes = True |
+Stop On First Error File = False |
+Bring Up Err Win For Warnings = True |
+Show Build Dialog = False |
+O Option Compatible With 5.0 = False |
+ |
+[Run Options] |
+Stack Size = 500000 |
+Debugging Level = "Standard" |
+Save Changes Before Running = "Ask" |
+Break On Library Errors = True |
+Break On First Chance Exceptions = False |
+Hide Windows = False |
+Break At First Statement = False |
+ |
+[Compiler Defines] |
+Compiler Defines = "/DWIN32_LEAN_AND_MEAN /DWIENVME" |
+ |
+[Command Line Args] |
+Command Line Args = "" |
+ |
+[Include Paths] |
+Include Path 1 = "/c/MeasurementStudio/cvi/instr/PCIVME_DLL" |
+Include Path 2 = "/c/MeasurementStudio/cvi/instr/WIENVME_DLL" |
+Include Path 3 = "/c/HOME/dino/l2d/include" |
+ |
+[Included Headers] |
+Header 0058 = "/c/HOME/dino/l2d/include/sipmThreshold_ui.h" |
+Header 0055 = "/c/HOME/dino/l2d/include/camac.h" |
+Header 0029 = "/c/MeasurementStudio/cvi/instr/WIENVME_DLL/wienvme_dll.h" |
+Header 0001 = "/c/MeasurementStudio/cvi/include/utility.h" |
+Header 0002 = "/c/MeasurementStudio/cvi/include/cvidef.h" |
+Header 0003 = "/c/MeasurementStudio/cvi/include/cvirte.h" |
+Header 0005 = "/c/MeasurementStudio/cvi/include/ansi_c.h" |
+Header 0006 = "/c/MeasurementStudio/cvi/include/ansi/assert.h" |
+Header 0007 = "/c/MeasurementStudio/cvi/include/ansi/ctype.h" |
+Header 0008 = "/c/MeasurementStudio/cvi/include/ansi/errno.h" |
+Header 0009 = "/c/MeasurementStudio/cvi/include/ansi/float.h" |
+Header 0010 = "/c/MeasurementStudio/cvi/include/ansi/limits.h" |
+Header 0011 = "/c/MeasurementStudio/cvi/include/ansi/locale.h" |
+Header 0012 = "/c/MeasurementStudio/cvi/include/ansi/math.h" |
+Header 0013 = "/c/MeasurementStudio/cvi/include/ansi/setjmp.h" |
+Header 0014 = "/c/MeasurementStudio/cvi/include/ansi/signal.h" |
+Header 0015 = "/c/MeasurementStudio/cvi/include/ansi/stdarg.h" |
+Header 0016 = "/c/MeasurementStudio/cvi/include/ansi/stddef.h" |
+Header 0017 = "/c/MeasurementStudio/cvi/include/ansi/stdio.h" |
+Header 0018 = "/c/MeasurementStudio/cvi/include/ansi/stdlib.h" |
+Header 0019 = "/c/MeasurementStudio/cvi/include/ansi/string.h" |
+Header 0020 = "/c/MeasurementStudio/cvi/include/ansi/time.h" |
+Header 0021 = "/c/MeasurementStudio/cvi/instr/MIKRO/MIKRO.h" |
+Header 0022 = "/c/MeasurementStudio/cvi/include/ivi.h" |
+Header 0023 = "/c/MeasurementStudio/cvi/include/visa.h" |
+Header 0024 = "/c/MeasurementStudio/cvi/include/visatype.h" |
+Header 0025 = "/c/MeasurementStudio/cvi/include/vpptype.h" |
+Header 0027 = "/c/MeasurementStudio/cvi/instr/CAENV673A/CAENV673A.h" |
+Header 0030 = "/c/MeasurementStudio/cvi/sdk/include/windows.h" |
+Header 0031 = "/c/MeasurementStudio/cvi/sdk/include/windef.h" |
+Header 0032 = "/c/MeasurementStudio/cvi/sdk/include/winnt.h" |
+Header 0033 = "/c/MeasurementStudio/cvi/sdk/include/basetsd.h" |
+Header 0034 = "/c/MeasurementStudio/cvi/sdk/include/Guiddef.h" |
+Header 0035 = "/c/MeasurementStudio/cvi/sdk/include/pshpack4.h" |
+Header 0036 = "/c/MeasurementStudio/cvi/sdk/include/poppack.h" |
+Header 0037 = "/c/MeasurementStudio/cvi/sdk/include/pshpack2.h" |
+Header 0038 = "/c/MeasurementStudio/cvi/sdk/include/pshpack8.h" |
+Header 0039 = "/c/MeasurementStudio/cvi/sdk/include/winbase.h" |
+Header 0040 = "/c/MeasurementStudio/cvi/sdk/include/winerror.h" |
+Header 0041 = "/c/MeasurementStudio/cvi/sdk/include/wingdi.h" |
+Header 0042 = "/c/MeasurementStudio/cvi/sdk/include/pshpack1.h" |
+Header 0043 = "/c/MeasurementStudio/cvi/sdk/include/winuser.h" |
+Header 0044 = "/c/MeasurementStudio/cvi/sdk/include/tvout.h" |
+Header 0045 = "/c/MeasurementStudio/cvi/sdk/include/winnls.h" |
+Header 0046 = "/c/MeasurementStudio/cvi/sdk/include/wincon.h" |
+Header 0047 = "/c/MeasurementStudio/cvi/sdk/include/winver.h" |
+Header 0048 = "/c/MeasurementStudio/cvi/sdk/include/winreg.h" |
+Header 0049 = "/c/MeasurementStudio/cvi/sdk/include/winnetwk.h" |
+Header 0050 = "/c/MeasurementStudio/cvi/sdk/include/winsvc.h" |
+Header 0051 = "/c/MeasurementStudio/cvi/sdk/include/mcx.h" |
+Header 0052 = "/c/MeasurementStudio/cvi/sdk/include/imm.h" |
+Header 0053 = "/c/MeasurementStudio/cvi/instr/CAENV462/CAENV462.h" |
+Header 0056 = "/c/MeasurementStudio/cvi/include/userint.h" |
+Header 0057 = "/c/MeasurementStudio/cvi/include/analysis.h" |
+Header 0004 = "/c/MeasurementStudio/cvi/include/formatio.h" |
+Header 0026 = "/c/MeasurementStudio/cvi/include/rs232.h" |
+Header 0028 = "/c/MeasurementStudio/cvi/instr/CAENV673A/CAENV673A_DEF.h" |
+Header 0054 = "/c/MeasurementStudio/cvi/instr/CAENV462/CAENV462_DEF.h" |
+Max Header Number = 58 |
+ |
+[Create Executable] |
+Executable File_Debug = "/c/HOME/dino/l2d/sipmThr_dbg.exe" |
+Target Creation Date_Debug = 3478365487 |
+Force Creation of Target_Debug = False |
+Executable File_Release = "/c/HOME/dino/l2d/l2d.exe" |
+Target Creation Date_Release = 0 |
+Force Creation of Target_Release = True |
+Icon File = "" |
+Application Title = "" |
+DLL Exports = "Include File Symbols" |
+DLL Import Library Choice = "Gen Lib For Current Mode" |
+Use VXIPNP Subdirectories for Import Libraries = False |
+Use Dflt Import Lib Base Name = True |
+Where to Copy DLL = "Do not copy" |
+Add Type Lib To DLL = False |
+Include Type Lib Help Links = False |
+Type Lib FP File = "" |
+Type Lib Guid = "" |
+Uses DataSocket = 0 |
+Uses NIReports = 0 |
+Uses DCom95 = 0 |
+Instrument Driver Support Only = False |
+ |
+[External Compiler Support] |
+UIR Callbacks File Option = 0 |
+Using LoadExternalModule = False |
+Create Project Symbols File = True |
+UIR Callbacks Obj File = "" |
+Project Symbols H File = "" |
+Project Symbols Obj File = "" |
+ |
+[DLL Debugging Support] |
+External Process Path = "" |
+ |
Index: include/sipmScan_ui.h |
=================================================================== |
--- include/sipmScan_ui.h (nonexistent) |
+++ include/sipmScan_ui.h (revision 31) |
@@ -0,0 +1,82 @@ |
+/**************************************************************************/ |
+/* LabWindows/CVI User Interface Resource (UIR) Include File */ |
+/* Copyright (c) National Instruments 2014. All Rights Reserved. */ |
+/* */ |
+/* WARNING: Do not add to, delete from, or otherwise modify the contents */ |
+/* of this include file. */ |
+/**************************************************************************/ |
+ |
+#include <userint.h> |
+ |
+#ifdef __cplusplus |
+ extern "C" { |
+#endif |
+ |
+ /* Panels and Controls: */ |
+ |
+#define P1 1 |
+#define P1_AMPDISSHTHR 2 |
+#define P1_ASD8THR 3 |
+#define P1_EXIT 4 |
+#define P1_ADC 5 |
+#define P1_TDC 6 |
+#define P1_RESET 7 |
+#define P1_CEVE 8 |
+#define P1_NMIN 9 |
+#define P1_NEVE 10 |
+#define P1_FRAC 11 |
+#define P1_TDCMIN 12 |
+#define P1_PEDESTAL 13 |
+#define P1_ADCHLSAVE 14 |
+#define P1_ADCHL 15 |
+#define P1_ADCLOG 16 |
+#define P1_TDCLOG 17 |
+#define P1_TDCHL 18 |
+#define P1_DAQ 19 |
+#define P1_SUPR 20 |
+#define P1_DSAVE 21 |
+#define P1_DFILE 22 |
+#define P1_IY 23 |
+#define P1_Z 24 |
+#define P1_Y 25 |
+#define P1_YMIN 26 |
+#define P1_IX 27 |
+#define P1_YSTEP 28 |
+#define P1_X 29 |
+#define P1_NY 30 |
+#define P1_ZSET 31 |
+#define P1_XMIN 32 |
+#define P1_XSTEP 33 |
+#define P1_NX 34 |
+#define P1_MGET 35 |
+#define P1_REREAD 36 |
+#define P1_HO 37 |
+#define P1_PLCH 38 |
+#define P1_NEWF 39 |
+#define P1_REFON 40 |
+#define P1_REFRESH 41 |
+#define P1_DEBUG 42 |
+#define P1_SAMPDISSHTHR 43 |
+#define P1_SASD8THR 44 |
+#define P1_TIMER 45 /* callback function: cb_timer */ |
+#define P1_DECORATION 46 |
+#define P1_TEXTMSG 47 |
+#define P1_TEXTMSG_2 48 |
+#define P1_TEXTMSG_3 49 |
+#define P1_TEXTMSG_4 50 |
+#define P1_TEXTMSG_5 51 |
+ |
+ |
+ /* Menu Bars, Menus, and Menu Items: */ |
+ |
+ /* (no menu bars in the resource file) */ |
+ |
+ |
+ /* Callback Prototypes: */ |
+ |
+int CVICALLBACK cb_timer(int panel, int control, int event, void *callbackData, int eventData1, int eventData2); |
+ |
+ |
+#ifdef __cplusplus |
+ } |
+#endif |
Index: include/sipmThreshold_ui.uir |
=================================================================== |
Cannot display: file marked as a binary type. |
svn:mime-type = application/octet-stream |
/include/sipmThreshold_ui.uir |
---|
Property changes: |
Added: svn:mime-type |
## -0,0 +1 ## |
+application/octet-stream |
\ No newline at end of property |
Index: include/sipmScan_ui.uir |
=================================================================== |
Cannot display: file marked as a binary type. |
svn:mime-type = application/octet-stream |
/include/sipmScan_ui.uir |
---|
Property changes: |
Added: svn:mime-type |
## -0,0 +1 ## |
+application/octet-stream |
\ No newline at end of property |
Index: include/sipmThreshold_ui.h |
=================================================================== |
--- include/sipmThreshold_ui.h (nonexistent) |
+++ include/sipmThreshold_ui.h (revision 31) |
@@ -0,0 +1,84 @@ |
+/**************************************************************************/ |
+/* LabWindows/CVI User Interface Resource (UIR) Include File */ |
+/* Copyright (c) National Instruments 2014. All Rights Reserved. */ |
+/* */ |
+/* WARNING: Do not add to, delete from, or otherwise modify the contents */ |
+/* of this include file. */ |
+/**************************************************************************/ |
+ |
+#include <userint.h> |
+ |
+#ifdef __cplusplus |
+ extern "C" { |
+#endif |
+ |
+ /* Panels and Controls: */ |
+ |
+#define P1 1 |
+#define P1_AMPDISSHTHR 2 |
+#define P1_EXIT 3 |
+#define P1_ADC 4 |
+#define P1_TDC 5 |
+#define P1_RESET 6 |
+#define P1_CEVE 7 |
+#define P1_NMIN 8 |
+#define P1_NEVE 9 |
+#define P1_FRAC 10 |
+#define P1_TDCMIN 11 |
+#define P1_PEDESTAL 12 |
+#define P1_ADCHLSAVE 13 |
+#define P1_ADCHL 14 |
+#define P1_ADCLOG 15 |
+#define P1_TDCLOG 16 |
+#define P1_TDCHL 17 |
+#define P1_DAQ 18 |
+#define P1_SUPR 19 |
+#define P1_DSAVE 20 |
+#define P1_DFILE 21 |
+#define P1_IY 22 |
+#define P1_Z 23 |
+#define P1_Y 24 |
+#define P1_YMIN 25 |
+#define P1_IX 26 |
+#define P1_YSTEP 27 |
+#define P1_X 28 |
+#define P1_NY 29 |
+#define P1_ZSET 30 |
+#define P1_XMIN 31 |
+#define P1_XSTEP 32 |
+#define P1_NX 33 |
+#define P1_MGET 34 |
+#define P1_REREAD 35 |
+#define P1_HO 36 |
+#define P1_PLCH 37 |
+#define P1_NEWF 38 |
+#define P1_REFON 39 |
+#define P1_REFRESH 40 |
+#define P1_DEBUG 41 |
+#define P1_SAMPDISSHTHR 42 |
+#define P1_STHRLOW 43 |
+#define P1_STHRUP 44 |
+#define P1_STEP 45 |
+#define P1_TIMER 46 /* callback function: cb_timer */ |
+#define P1_DECORATION 47 |
+#define P1_TEXTMSG 48 |
+#define P1_TEXTMSG_2 49 |
+#define P1_TEXTMSG_3 50 |
+#define P1_TEXTMSG_4 51 |
+#define P1_TEXTMSG_5 52 |
+#define P1_TEXTMSG_6 53 |
+ |
+ |
+ /* Menu Bars, Menus, and Menu Items: */ |
+ |
+ /* (no menu bars in the resource file) */ |
+ |
+ |
+ /* Callback Prototypes: */ |
+ |
+int CVICALLBACK cb_timer(int panel, int control, int event, void *callbackData, int eventData1, int eventData2); |
+ |
+ |
+#ifdef __cplusplus |
+ } |
+#endif |
Index: include/RTUtil.h |
=================================================================== |
--- include/RTUtil.h (nonexistent) |
+++ include/RTUtil.h (revision 31) |
@@ -0,0 +1,38 @@ |
+#ifndef __RTUtil__ |
+#define __RTUtil__ |
+ |
+#include "TROOT.h" |
+#include "TCanvas.h" |
+#include "TPad.h" |
+#include "TPaveLabel.h" |
+#include "TStyle.h" |
+#include "TDatime.h" |
+ |
+//########################################################################################## |
+// nastavi nastavitve izrisa, klicem z RTSetStyle(gStyle) |
+void RTSetStyle(TStyle *style); |
+//########################################################################################## |
+// poenostavi delo s TCanvas |
+class RTCanvas |
+{ |
+protected: |
+ TCanvas *can; |
+ TPad *pad; |
+ TPaveLabel *title, *date; |
+public: |
+ RTCanvas(); |
+ RTCanvas(char *w_title, char *c_title, int x_min, int y_min, int x_size, int y_size); |
+ |
+ void Divide(int nx, int ny); |
+ void Divide(int np); |
+ TPad* cd(int i); |
+ void SaveAs(const char *filename); |
+ void Update(); |
+}; |
+//########################################################################################## |
+#include "RTUtil.cpp" |
+ |
+#endif |
+ |
+ |
+ |
Index: include/camac.h |
=================================================================== |
--- include/camac.h (nonexistent) |
+++ include/camac.h (revision 31) |
@@ -0,0 +1,14 @@ |
+#define BCNAF(B,C,N,A,F) 0x800000+(B)*0x80000+(C)*0x10000+(N)*0x800+(A)*0x80+(F)*0x4 |
+#define NAF(N,A,F) 0x810002+(N)*0x800+(A)*0x80+(F)*0x4 |
+#define BRF(F) 0x80E802+(F)*0x4 |
+ |
+#define CSSA_R(N,A,F,DATA) VME_A24D16_R((NAF((N),(A),(F))),(DATA)) |
+#define CSSA_W(N,A,F,DATA) VME_A24D16_W((NAF((N),(A),(F))),(DATA)) |
+ |
+#define CSR(DATA) VME_A24D16_R((BRF(0)),(DATA)) |
+#define BZ(DATA) VME_A24D16_W((BRF(9)),(DATA)) |
+ |
+#define CCCZ(DATA) CSSA_R(28,8,26,(DATA)) |
+#define CCCC(DATA) CSSA_R(28,9,26,(DATA)) |
+#define CSET_I(DATA) CSSA_R(30,9,26,(DATA)) |
+#define CREM_I(DATA) CSSA_R(30,9,24,(DATA)) |
Index: d2r.ini |
=================================================================== |
--- d2r.ini (nonexistent) |
+++ d2r.ini (revision 31) |
@@ -0,0 +1,72 @@ |
+# ch pad_center_x pad_center_y tdc_offset # sipm2, tdc modified 20/3/14 pos added 20/2/14 |
+0 75600 5040 142.5 |
+1 55440 5040 142.1 |
+2 75600 15120 142.1 |
+3 55440 15120 141.6 |
+4 45360 25200 142.2 |
+5 65520 25200 141.9 |
+6 45360 35280 143 |
+7 65520 35280 141.3 |
+ |
+8 75600 45360 141 |
+9 55440 45360 140 |
+10 75600 55440 140 |
+11 55440 55440 140 |
+12 45360 65520 140 |
+13 65520 65520 140 |
+14 45360 75600 140 |
+15 65520 75600 140 |
+ |
+16 65520 5040 142.7 |
+17 45360 5040 142 |
+18 65520 15120 142 |
+19 45360 15120 142.1 |
+20 55440 25200 142.1 |
+21 75600 25200 141 |
+22 55440 35280 142 |
+23 75600 35280 142 |
+ |
+24 65520 45360 142 |
+25 45360 45360 141.5 |
+26 65520 55440 141.8 |
+27 45360 55440 141.9 |
+28 55440 65520 141.3 |
+29 75600 65520 141 |
+30 55440 75600 141.7 |
+31 75600 75600 145 |
+ |
+32 5040 5040 141 |
+33 25200 5040 141 |
+34 5040 15120 141 |
+35 25200 15120 141 |
+36 35280 25200 141 |
+37 15120 25200 141 |
+38 35280 35280 141 |
+39 15120 35280 140.1 |
+ |
+40 5040 45360 142.8 |
+41 25200 45360 142.7 |
+42 5040 55440 143.7 |
+43 25200 55440 142.7 |
+44 35280 65520 142.7 |
+45 15120 65520 142.4 |
+46 35280 75600 142.1 |
+47 15120 75600 141.9 |
+ |
+48 15120 5040 143 |
+49 35280 5040 140.9 |
+50 15120 15120 142 |
+51 35280 15120 141.5 |
+52 25200 25200 140 |
+53 5040 25200 141.3 |
+54 25200 35280 142 |
+55 5040 35280 141 |
+ |
+56 15120 45360 140 |
+57 35280 45360 140 |
+58 15120 55440 140 |
+59 35280 55440 140 |
+60 25200 65520 140 |
+61 5040 65520 140 |
+62 25200 75600 140 |
+63 5040 75600 140 |
Index: sipmScan.prj |
=================================================================== |
--- sipmScan.prj (nonexistent) |
+++ sipmScan.prj (revision 31) |
@@ -0,0 +1,267 @@ |
+[Project Header] |
+Version = 551 |
+Platform Code = 4 |
+Pathname = "/c/HOME/dino/l2d/sipmScan.prj" |
+CVI Dir = "/c/measurementstudio/cvi" |
+VXIplug&play Framework Dir = "/C/VXIpnp/winnt" |
+Number of Files = 8 |
+Sort Type = "No Sort" |
+Target Type = "Executable" |
+Build Configuration = "Debug" |
+Warn User If Debugging Release = 1 |
+Flags = 17 |
+Drag Bar Left = 354 |
+Window Top = 474 |
+Window Left = 602 |
+Window Bottom = 978 |
+Window Right = 1346 |
+ |
+[File 0001] |
+File Type = "Include" |
+Path = "/c/MeasurementStudio/cvi/instr/WIENVME_DLL/wienvme_dll.h" |
+Res Id = 1 |
+Exclude = False |
+Disk Date = 3263048972 |
+Project Flags = 0 |
+Window Top = 0 |
+Window Left = 0 |
+Window Height = 0 |
+Window Width = 0 |
+Source Window State = "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0," |
+ |
+[File 0002] |
+File Type = "Function Panel" |
+Path = "/c/MeasurementStudio/cvi/instr/MIKRO/MIKRO.fp" |
+Res Id = 2 |
+Exclude = False |
+Disk Date = 3228636098 |
+Project Flags = 0 |
+Window Top = 0 |
+Window Left = 0 |
+Window Height = 0 |
+Window Width = 0 |
+ |
+[File 0003] |
+File Type = "Include" |
+Path = "/c/HOME/dino/l2d/include/sipmScan_ui.h" |
+Res Id = 3 |
+Exclude = False |
+Disk Date = 3474463671 |
+Project Flags = 0 |
+Window Top = 122 |
+Window Left = 54 |
+Window Height = 0 |
+Window Width = 0 |
+Source Window State = "1,0,0,0,0,0,0,0,0,120,0,0,0,0,0,49,0,0,0,0," |
+ |
+[File 0004] |
+File Type = "CSource" |
+Path = "/c/HOME/dino/l2d/src/sipmScan.c" |
+Res Id = 4 |
+Exclude = False |
+Disk Date = 3478946031 |
+Project Flags = 0 |
+Compile Into Object File = False |
+Object Format = "Win32-MSVC" |
+ForceCompile_Debug = False |
+ForceCompile_Release = True |
+Window Top = 92 |
+Window Left = 38 |
+Window Height = 0 |
+Window Width = 0 |
+Source Window State = "1,0,0,0,0,0,0,0,0,125,0,0,0,0,0,52,0,0,32,16," |
+Header Dependencies Line0001 = "1,2,3,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,27,29,30,31,32,3" |
+Header Dependencies Line0002 = "3,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,55,56,58,59," |
+ |
+[File 0005] |
+File Type = "User Interface Resource" |
+Path = "/c/HOME/dino/l2d/include/sipmScan_ui.uir" |
+Res Id = 5 |
+Exclude = False |
+Disk Date = 3478365379 |
+Project Flags = 0 |
+Window Top = 152 |
+Window Left = 70 |
+Window Height = 823 |
+Window Width = 1248 |
+ |
+[File 0006] |
+File Type = "Function Panel" |
+Path = "/c/MeasurementStudio/cvi/instr/CAENV673A/CAENV673A.fp" |
+Res Id = 6 |
+Exclude = False |
+Disk Date = 3244091108 |
+Project Flags = 0 |
+Window Top = 0 |
+Window Left = 0 |
+Window Height = 0 |
+Window Width = 0 |
+ |
+[File 0007] |
+File Type = "Function Panel" |
+Path = "/c/MeasurementStudio/cvi/instr/WIENVME_DLL/wienvme_dll.fp" |
+Res Id = 7 |
+Exclude = False |
+Disk Date = 3258260654 |
+Project Flags = 0 |
+Window Top = 0 |
+Window Left = 0 |
+Window Height = 0 |
+Window Width = 0 |
+ |
+[File 0008] |
+File Type = "Function Panel" |
+Path = "/c/MeasurementStudio/cvi/instr/CAENV462/CAENV462.fp" |
+Res Id = 8 |
+Exclude = False |
+Disk Date = 3243838534 |
+Project Flags = 0 |
+Window Top = 0 |
+Window Left = 0 |
+Window Height = 0 |
+Window Width = 0 |
+ |
+[SCC Options] |
+Use global settings = True |
+SCC Provider = "" |
+SCC Project = "" |
+Local Path = "" |
+Auxiliary Path = "" |
+Perform Same Action For .h File As For .uir File = "Ask" |
+Comment = "" |
+Username = "" |
+Use Default Comment = False |
+Use Default Username = False |
+Do Not Include PRJ File in Actions = True |
+Suppress CVI Error Messages = False |
+ |
+[Compiler Options] |
+Default Calling Convention = "cdecl" |
+Max Number Of Errors = 10 |
+Require Prototypes = True |
+Require Return Values = True |
+Enable Pointer Mismatch Warning = False |
+Enable Unreachable Code Warning = False |
+Track Include File Dependencies = True |
+Prompt For Missing Includes = True |
+Stop On First Error File = False |
+Bring Up Err Win For Warnings = True |
+Show Build Dialog = False |
+O Option Compatible With 5.0 = False |
+ |
+[Run Options] |
+Stack Size = 500000 |
+Debugging Level = "Standard" |
+Save Changes Before Running = "Ask" |
+Break On Library Errors = True |
+Break On First Chance Exceptions = False |
+Hide Windows = False |
+Break At First Statement = False |
+ |
+[Compiler Defines] |
+Compiler Defines = "/DWIN32_LEAN_AND_MEAN /DWIENVME" |
+ |
+[Command Line Args] |
+Command Line Args = "" |
+ |
+[Include Paths] |
+Include Path 1 = "/c/MeasurementStudio/cvi/instr/PCIVME_DLL" |
+Include Path 2 = "/c/MeasurementStudio/cvi/instr/WIENVME_DLL" |
+Include Path 3 = "/c/HOME/dino/l2d/include" |
+ |
+[Included Headers] |
+Header 0029 = "/c/MeasurementStudio/cvi/instr/WIENVME_DLL/wienvme_dll.h" |
+Header 0001 = "/c/MeasurementStudio/cvi/include/utility.h" |
+Header 0002 = "/c/MeasurementStudio/cvi/include/cvidef.h" |
+Header 0003 = "/c/MeasurementStudio/cvi/include/cvirte.h" |
+Header 0005 = "/c/MeasurementStudio/cvi/include/ansi_c.h" |
+Header 0006 = "/c/MeasurementStudio/cvi/include/ansi/assert.h" |
+Header 0007 = "/c/MeasurementStudio/cvi/include/ansi/ctype.h" |
+Header 0008 = "/c/MeasurementStudio/cvi/include/ansi/errno.h" |
+Header 0009 = "/c/MeasurementStudio/cvi/include/ansi/float.h" |
+Header 0010 = "/c/MeasurementStudio/cvi/include/ansi/limits.h" |
+Header 0011 = "/c/MeasurementStudio/cvi/include/ansi/locale.h" |
+Header 0012 = "/c/MeasurementStudio/cvi/include/ansi/math.h" |
+Header 0013 = "/c/MeasurementStudio/cvi/include/ansi/setjmp.h" |
+Header 0014 = "/c/MeasurementStudio/cvi/include/ansi/signal.h" |
+Header 0015 = "/c/MeasurementStudio/cvi/include/ansi/stdarg.h" |
+Header 0016 = "/c/MeasurementStudio/cvi/include/ansi/stddef.h" |
+Header 0017 = "/c/MeasurementStudio/cvi/include/ansi/stdio.h" |
+Header 0018 = "/c/MeasurementStudio/cvi/include/ansi/stdlib.h" |
+Header 0019 = "/c/MeasurementStudio/cvi/include/ansi/string.h" |
+Header 0020 = "/c/MeasurementStudio/cvi/include/ansi/time.h" |
+Header 0021 = "/c/MeasurementStudio/cvi/instr/MIKRO/MIKRO.h" |
+Header 0022 = "/c/MeasurementStudio/cvi/include/ivi.h" |
+Header 0023 = "/c/MeasurementStudio/cvi/include/visa.h" |
+Header 0024 = "/c/MeasurementStudio/cvi/include/visatype.h" |
+Header 0025 = "/c/MeasurementStudio/cvi/include/vpptype.h" |
+Header 0027 = "/c/MeasurementStudio/cvi/instr/CAENV673A/CAENV673A.h" |
+Header 0030 = "/c/MeasurementStudio/cvi/sdk/include/windows.h" |
+Header 0031 = "/c/MeasurementStudio/cvi/sdk/include/windef.h" |
+Header 0032 = "/c/MeasurementStudio/cvi/sdk/include/winnt.h" |
+Header 0033 = "/c/MeasurementStudio/cvi/sdk/include/basetsd.h" |
+Header 0034 = "/c/MeasurementStudio/cvi/sdk/include/Guiddef.h" |
+Header 0035 = "/c/MeasurementStudio/cvi/sdk/include/pshpack4.h" |
+Header 0036 = "/c/MeasurementStudio/cvi/sdk/include/poppack.h" |
+Header 0037 = "/c/MeasurementStudio/cvi/sdk/include/pshpack2.h" |
+Header 0038 = "/c/MeasurementStudio/cvi/sdk/include/pshpack8.h" |
+Header 0039 = "/c/MeasurementStudio/cvi/sdk/include/winbase.h" |
+Header 0040 = "/c/MeasurementStudio/cvi/sdk/include/winerror.h" |
+Header 0041 = "/c/MeasurementStudio/cvi/sdk/include/wingdi.h" |
+Header 0042 = "/c/MeasurementStudio/cvi/sdk/include/pshpack1.h" |
+Header 0043 = "/c/MeasurementStudio/cvi/sdk/include/winuser.h" |
+Header 0044 = "/c/MeasurementStudio/cvi/sdk/include/tvout.h" |
+Header 0045 = "/c/MeasurementStudio/cvi/sdk/include/winnls.h" |
+Header 0046 = "/c/MeasurementStudio/cvi/sdk/include/wincon.h" |
+Header 0047 = "/c/MeasurementStudio/cvi/sdk/include/winver.h" |
+Header 0048 = "/c/MeasurementStudio/cvi/sdk/include/winreg.h" |
+Header 0049 = "/c/MeasurementStudio/cvi/sdk/include/winnetwk.h" |
+Header 0050 = "/c/MeasurementStudio/cvi/sdk/include/winsvc.h" |
+Header 0051 = "/c/MeasurementStudio/cvi/sdk/include/mcx.h" |
+Header 0052 = "/c/MeasurementStudio/cvi/sdk/include/imm.h" |
+Header 0053 = "/c/MeasurementStudio/cvi/instr/CAENV462/CAENV462.h" |
+Header 0055 = "/c/MeasurementStudio/cvi/include/userint.h" |
+Header 0056 = "/c/MeasurementStudio/cvi/include/analysis.h" |
+Header 0057 = "/c/HOME/dino/l2d/camac.h" |
+Header 0004 = "/c/MeasurementStudio/cvi/include/formatio.h" |
+Header 0026 = "/c/MeasurementStudio/cvi/include/rs232.h" |
+Header 0028 = "/c/MeasurementStudio/cvi/instr/CAENV673A/CAENV673A_DEF.h" |
+Header 0054 = "/c/MeasurementStudio/cvi/instr/CAENV462/CAENV462_DEF.h" |
+Header 0059 = "/c/HOME/dino/l2d/include/sipmScan_ui.h" |
+Header 0058 = "/c/HOME/dino/l2d/include/camac.h" |
+Max Header Number = 59 |
+ |
+[Create Executable] |
+Executable File_Debug = "/c/HOME/dino/l2d/sipmScan_dbg.exe" |
+Target Creation Date_Debug = 3478946033 |
+Force Creation of Target_Debug = False |
+Executable File_Release = "/c/HOME/dino/l2d/l2d.exe" |
+Target Creation Date_Release = 0 |
+Force Creation of Target_Release = True |
+Icon File = "" |
+Application Title = "" |
+DLL Exports = "Include File Symbols" |
+DLL Import Library Choice = "Gen Lib For Current Mode" |
+Use VXIPNP Subdirectories for Import Libraries = False |
+Use Dflt Import Lib Base Name = True |
+Where to Copy DLL = "Do not copy" |
+Add Type Lib To DLL = False |
+Include Type Lib Help Links = False |
+Type Lib FP File = "" |
+Type Lib Guid = "" |
+Uses DataSocket = 0 |
+Uses NIReports = 0 |
+Uses DCom95 = 0 |
+Instrument Driver Support Only = False |
+ |
+[External Compiler Support] |
+UIR Callbacks File Option = 0 |
+Using LoadExternalModule = False |
+Create Project Symbols File = True |
+UIR Callbacks Obj File = "" |
+Project Symbols H File = "" |
+Project Symbols Obj File = "" |
+ |
+[DLL Debugging Support] |
+External Process Path = "" |
+ |