WebSVN - f9daq - Path Comparison - / Rev 111 and / Rev 112

Ignore whitespace Rev 111 → Rev 112

/petdaqfmf/libxxusb.cpp
File deleted

Property changes:
Deleted: svn:executable
Index: petdaqfmf/CAENV965.c
===================================================================
--- petdaqfmf/CAENV965.c (revision 111)
+++ petdaqfmf/CAENV965.c (nonexistent)
@@ -1,107 +0,0 @@
-#include <stdlib.h>
-#include <stdio.h>
-#include "CAENV965.h"
-#include "CAENV965_DEF.h"
-#include "vme.h"
-
-static unsigned long ModuleAddress[10];
-
-int _VI_FUNC V965_map (int ModuleNumber, unsigned long ModuleOffset, int print)
-{
- int i;
- unsigned short geo, fw, ah, al;
- if (print) {
- printf("CAEN V965_map \n");
- }
- ModuleAddress[ModuleNumber] = ModuleOffset;
- VME_A24D16_R(ModuleAddress[ModuleNumber] + CAENV965_FW, &fw);
- geo = 0;
- VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_CRN, &geo);
- for (i=0;i<32;i++)
- VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_THM + 2*i, &geo);
- geo = ModuleNumber+1;
- VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_GEO, &geo);
- geo = 0;
- VME_A24D16_R(ModuleAddress[ModuleNumber] + CAENV965_GEO, &geo);
- VME_A24D16_R(ModuleAddress[ModuleNumber] + CAENV965_ADH, &ah);
- VME_A24D16_R(ModuleAddress[ModuleNumber] + CAENV965_ADL, &al);
- if (print) {
- printf("CAEN V965 offset = 0x%08x\n", ModuleOffset);
- printf(" V965_map firmware = %d.%d\n", (fw>>8)&0xff, fw&0xff);
- printf(" V965_map geo = %d\n", geo&0x1f );
- printf(" V965_map addr = 0x%04X0000\n", (ah<<8)\|(al&0xff));
- }
-
- return 0;
-}
-
-
-int _VI_FUNC V965_init (int ModuleNumber, unsigned short ped)
-{
- unsigned short dum16;
-
- dum16= 0x80;
- VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_BS1, &dum16);
- VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_BC1, &dum16);
- dum16= ped;
- VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_PED, &dum16);
- dum16= 0x5000;
- VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_BS2, &dum16);
- dum16= 0x4;
- VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_BS2, &dum16);
- VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_BC2, &dum16);
- VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_ECR, &dum16);
-
- printf ( " V965_init Module %d initialized!\n", ModuleNumber ) ;
- return 0;
-}
-
-int _VI_FUNC V965_clear (int ModuleNumber)
-{
-
- unsigned short dum16;
-
- dum16= 0x4;
- VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_BS2, &dum16);
- VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_BC2, &dum16);
- printf("V965_clear\n");
- return 0;
-
-}
-
-int _VI_FUNC V965_status (int ModuleNumber)
-{
- unsigned short dum16;
-
- VME_A24D16_R(ModuleAddress[ModuleNumber] + CAENV965_SR1, &dum16);
- //printf("*%d\n",dum16);
- return (int)dum16;
-}
-
-int _VI_FUNC V965_status2 (int ModuleNumber)
-{
-
- unsigned short dum16;
-
- VME_A24D16_R(ModuleAddress[ModuleNumber] + CAENV965_SR2, &dum16);
-
- return (int)dum16;
-}
-
-int _VI_FUNC V965_read (int ModuleNumber, unsigned long whereto[],int len)
-{
- int status, ndata, i;
-
- ndata = 0;
-
- do {
- if (ndata>=len) {
- printf("ERROR V965_read: Increase storage size: ndata=%d\n",ndata);
- break;
- }
- VME_A24D32_R(ModuleAddress[ModuleNumber] + CAENV965_OB, &whereto[ndata]);
- i=(whereto[ndata]>>25)&0x3;
- if (i<3) ndata++;
- } while (i<2);
- return ndata;
-}
Index: petdaqfmf/CAENV965.h
===================================================================
--- petdaqfmf/CAENV965.h (revision 111)
+++ petdaqfmf/CAENV965.h (nonexistent)
@@ -1,13 +0,0 @@
-#ifndef _CAENV965_H
-#define _CAENV965_H
-
-#define _VI_FUNC
-
-int _VI_FUNC V965_map (int ModuleNumber, unsigned long ModuleOffset, int print) ;
-int _VI_FUNC V965_init (int ModuleNumber, unsigned short ped) ;
-int _VI_FUNC V965_clear (int ModuleNumber) ;
-int _VI_FUNC V965_status (int ModuleNumber) ;
-int _VI_FUNC V965_status2 (int ModuleNumber) ;
-int _VI_FUNC V965_read (int ModuleNumber, unsigned long whereto[],int len);
-
-#endif
Index: petdaqfmf/libxxusb.h
===================================================================
--- petdaqfmf/libxxusb.h (revision 111)
+++ petdaqfmf/libxxusb.h (nonexistent)
@@ -1,114 +0,0 @@
-#include <usb.h>
-
-
-#define XXUSB_WIENER_VENDOR_ID 0x16DC /* Wiener, Plein & Baus */
-#define XXUSB_VMUSB_PRODUCT_ID 0x000B /* VM-USB */
-#define XXUSB_CCUSB_PRODUCT_ID 0x0001 /* CC-USB */
-#define XXUSB_ENDPOINT_OUT 2 /* Endpoint 2 Out*/
-#define XXUSB_ENDPOINT_IN 0x86 /* Endpoint 6 In */
-#define XXUSB_FIRMWARE_REGISTER 0
-#define XXUSB_GLOBAL_REGISTER 1
-#define XXUSB_ACTION_REGISTER 10
-#define XXUSB_DELAYS_REGISTER 2
-#define XXUSB_WATCHDOG_REGISTER 3
-#define XXUSB_SELLEDA_REGISTER 6
-#define XXUSB_SELNIM_REGISTER 7
-#define XXUSB_SELLEDB_REGISTER 4
-#define XXUSB_SERIAL_REGISTER 15
-#define XXUSB_LAMMASK_REGISTER 8
-#define XXUSB_LAM_REGISTER 12
-#define XXUSB_READOUT_STACK 2
-#define XXUSB_SCALER_STACK 3
-#define XXUSB_NAF_DIRECT 12
-
-// dodal 19.4.2011 da dela na 64-bit masinah
-typedef unsigned int Uint32_t;
-
-struct XXUSB_STACK
-{
-Uint32_t Data;
-short Hit;
-short APatt;
-short Num;
-short HitMask;
-};
-
-struct XXUSB_CC_COMMAND_TYPE
-{
-short Crate;
-short F;
-short A;
-short N;
-Uint32_t Data;
-short NoS2;
-short LongD;
-short HitPatt;
-short QStop;
-short LAMMode;
-short UseHit;
-short Repeat;
-short AddrScan;
-short FastCam;
-short NumMod;
-short AddrPatt;
-Uint32_t HitMask[4];
-Uint32_t Num;
-};
-
-struct xxusb_device_typ
-{
- struct usb_device *usbdev;
- char SerialString[7];
-};
-
-typedef struct xxusb_device_typ xxusb_device_type;
-typedef unsigned char UCHAR;
-typedef struct usb_bus usb_busx;
-
-
-int xxusb_longstack_execute(usb_dev_handle hDev, void DataBuffer, int lDataLen, int timeout);
-int xxusb_bulk_read(usb_dev_handle hDev, void DataBuffer, int lDataLen, int timeout);
-int xxusb_bulk_write(usb_dev_handle hDev, void DataBuffer, int lDataLen, int timeout);
-int xxusb_usbfifo_read(usb_dev_handle hDev, int DataBuffer, int lDataLen, int timeout);
-
-short xxusb_register_read(usb_dev_handle hDev, short RegAddr, Uint32_t RegData);
-short xxusb_stack_read(usb_dev_handle hDev, short StackAddr, Uint32_t StackData);
-short xxusb_stack_write(usb_dev_handle hDev, short StackAddr, Uint32_t StackData);
-short xxusb_stack_execute(usb_dev_handle hDev, Uint32_t StackData);
-short xxusb_register_write(usb_dev_handle *hDev, short RegAddr, Uint32_t RegData);
-short xxusb_reset_toggle(usb_dev_handle *hDev);
-
-short xxusb_devices_find(xxusb_device_type *xxusbDev);
-short xxusb_device_close(usb_dev_handle *hDev);
-usb_dev_handle* xxusb_device_open(struct usb_device *dev);
-short xxusb_flash_program(usb_dev_handle hDev, char config, short nsect);
-short xxusb_flashblock_program(usb_dev_handle hDev, UCHAR config);
-usb_dev_handle* xxusb_serial_open(char *SerialString);
-
-short VME_register_write(usb_dev_handle *hdev, Uint32_t VME_Address, Uint32_t Data);
-short VME_register_read(usb_dev_handle hdev, Uint32_t VME_Address, Uint32_t Data);
-short VME_LED_settings(usb_dev_handle *hdev, int LED, int code, int invert, int latch);
-short VME_DGG(usb_dev_handle *hdev, unsigned short channel, unsigned short trigger,unsigned short output, Uint32_t delay, unsigned short gate, unsigned short invert, unsigned short latch);
-
-short VME_Output_settings(usb_dev_handle *hdev, int Channel, int code, int invert, int latch);
-
-short VME_read_16(usb_dev_handle hdev,short Address_Modifier, Uint32_t VME_Address, Uint32_t Data);
-short VME_read_32(usb_dev_handle hdev, short Address_Modifier, Uint32_t VME_Address, Uint32_t Data);
-short VME_BLT_read_32(usb_dev_handle *hdev, short Address_Modifier, int count, Uint32_t VME_Address, Uint32_t Data[]);
-short VME_write_16(usb_dev_handle *hdev, short Address_Modifier, Uint32_t VME_Address, Uint32_t Data);
-short VME_write_32(usb_dev_handle *hdev, short Address_Modifier, Uint32_t VME_Address, Uint32_t Data);
-
-short CAMAC_DGG(usb_dev_handle *hdev, short channel, short trigger, short output, int delay, int gate, short invert, short latch);
-short CAMAC_register_read(usb_dev_handle hdev, int A, Uint32_t Data);
-short CAMAC_register_write(usb_dev_handle *hdev, int A, Uint32_t Data);
-short CAMAC_LED_settings(usb_dev_handle *hdev, int LED, int code, int invert, int latch);
-short CAMAC_Output_settings(usb_dev_handle *hdev, int Channel, int code, int invert, int latch);
-short CAMAC_read_LAM_mask(usb_dev_handle hdev, Uint32_t Data);
-short CAMAC_write_LAM_mask(usb_dev_handle *hdev, Uint32_t Data);
-
-short CAMAC_write(usb_dev_handle hdev, int N, int A, int F, Uint32_t Data, int Q, int *X);
-short CAMAC_read(usb_dev_handle hdev, int N, int A, int F, Uint32_t Data, int Q, int X);
-short CAMAC_Z(usb_dev_handle *hdev);
-short CAMAC_C(usb_dev_handle *hdev);
-short CAMAC_I(usb_dev_handle *hdev, int inhibit);
-

/petdaqfmf/libxxusb.h
Property changes:
Deleted: svn:executable
Index: petdaqfmf/daq.C
===================================================================
--- petdaqfmf/daq.C (revision 111)
+++ petdaqfmf/daq.C (nonexistent)
@@ -1,583 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/mman.h>
-#include <errno.h>
-#include <ctype.h>
-#include <time.h>
-#include <sys/time.h>
-#include <sys/stat.h>
-#include <signal.h>
-#include <zlib.h>
-
-#include "CAENV965_DEF.h"
-#include "VmUsbStack.h"
-
-#include "vme.h"
-
-#include "daq.h"
-
-#define VERSION 1.0
-#define TIMEOUT 3
-
-
-/* VME modules */
-
-#define CAEN_V792 0x340000 // IJS V792
-#define CAEN_V792_1 0x530000 // FMF1 V792
-#define CAEN_V792_2 0x630000 // FMF2 V792
-#define CAEN_V965 0x350000 // IJS V965
-int addr[3]={CAEN_V792,CAEN_V792_1,CAEN_V965 };
-int nadc=3;
-
-int gPedestal = 255;
-
-#define BUFF_L 2048
-static int stackwrite[10000];
-static int stackdata[10000],stackdump[27000];
-
-
-/************************************************/
-int weight_while(int num)
-{
- int i, tmp;
-
- for ( i =0; i <num; i++ ) tmp = 0;
- return 0;
-}
-#define WWHILE weight_while(0)
-
-#define TRUE 1
-#define FALSE 0
-
-int timer_out;
-struct sigaction oact;
-void timerast (int signumber)
-{
- timer_out = TRUE;
- fprintf(stderr,"TIMEOUT !!!\n");
-}
-
-void tmlnk (int tout)
-{
- timer_out = FALSE;
- struct sigaction act;
- struct itimerval tdelay;
-
- act.sa_handler = timerast;
- sigemptyset (&act.sa_mask);
- act.sa_flags = 0;
-
- tdelay.it_value.tv_sec = tout / 100;
- tdelay.it_value.tv_usec = 10000 * (tout % 100);
- tdelay.it_interval.tv_sec = 0;
- tdelay.it_interval.tv_usec = 0;
-
- if (sigaction (SIGALRM, &act, &oact) < 0)
- {
- perror ("sigaction(tmlnk)");
- exit (EXIT_FAILURE);
- }
- if (setitimer (ITIMER_REAL, &tdelay, NULL) < 0)
- {
- perror ("setitimer(tmlnk)");
- exit (EXIT_FAILURE);
- }
-}
-
-void tmulk ()
-{
- struct itimerval tdelay;
-
- tdelay.it_value.tv_sec = 0;
- tdelay.it_value.tv_usec = 0;
- tdelay.it_interval.tv_sec = 0;
- tdelay.it_interval.tv_usec = 0;
-
- if (setitimer (ITIMER_REAL, &tdelay, NULL) < 0)
- {
- perror ("setitimer(tmulk)");
- exit (EXIT_FAILURE);
- }
- if (sigaction (SIGALRM, &oact, NULL) < 0)
- {
- perror ("sigaction(tmulk)");
- exit (EXIT_FAILURE);
- }
-}
-
-int fexist( char * path){
- struct stat sbuf;
- int res;
- if(!path \|\| !*path) return 0;
- res=stat(path,&sbuf);
- if (res){
- if (errno==ENOENT) {
- return 0;
- } else {
- return -1;
- }
- }
- return 1;
-}
-
-
-
-
-int daq::init(){
-
- xxusb_register_write(udev,1,0x0); // Stop DAQ mode
- while (xxusb_usbfifo_read(udev,(int *) stackdump,BUFF_L,100)>0);
-
-
- int rate=1000;
- int i=80000000/rate-40; // 80 MHz
- if (i<72) i=72;
- // Set DGG channel A as a pulser, output on O1,
- // with delay =500 x 12.5ns,
- // and width = 500 x 12.5ns,
- // not latching or inverting
- // VME_DGG(udev,0,6,0,24000,6000,0,0);
- VME_DGG(udev,0,6,0,i,40,0,0);
- // Set DGG channel B to trigger on NIM1, output on O2,
- // with delay =200 x 12.5ns,
- // and width = 200 x 12.5ns,
- // not latching or inverting
- VME_DGG(udev,1,1,1,0,10,0,1);
-
-
-// INIT stackdata
- int fPedestal=gPedestal;
- printf("CAEN V965 Pedestal set to %d\n", fPedestal);
- if (fInit != NULL ) delete fInit;
- fInit=new VmUsbStack();
-
- for (int i=0;i<nadc;i++){
- fInit->WriteA24D16( addr[i] + CAENV965_CRN , 0x0);
- fInit->WriteA24D16( addr[i] + CAENV965_GEO , i);
- fInit->ReadA24D16(addr[i] + CAENV965_GEO);
- for (int j=0;j<32;j++){
- fInit->WriteA24D16(addr[i] + CAENV965_THM + 0x02j, fThreshold[j+i32]); // threshold/kill for 32 channels
- }
- fInit->WriteA24D16( addr[i] + CAENV965_BS1, 0x80 ); // soft reset
- fInit->WriteA24D16( addr[i] + CAENV965_BC1, 0x80 ); // soft reset
- fInit->WriteA24D16( addr[i] + CAENV965_PED, fPedestal ); // pedestal
- fInit->WriteA24D16( addr[i] + CAENV965_BS2,0x5000);
- fInit->WriteA24D16( addr[i] + CAENV965_BS2,0x4); // clear module
- fInit->WriteA24D16( addr[i] + CAENV965_BC2,0x4);
- }
- fInit->Marker(0xFAFC);
-
-// fInit->Print();
-
-
- // READOUT stackdata
- if (fStack != NULL ) delete fStack;
- fStack=new VmUsbStack();
- fStack->Marker(0xFFAB);
- //fStack->ConditionalRead(addr[i] + CAENV965_SR1,0x1); // TRG wait : loop until bit 0 is on
- // fStack->RepeatRead( CMD_A24, CMD_D32, addr[i] + CAENV965_OB,34,0); // repead read
- //fStack->ConditionalRead(addr[i] + CAENV965_OB ,0x4000000) ; // loop until bit 26 is on, read data
- for (int j=0;j<36;j++) fStack->ReadA24D32(addr[0] + CAENV965_OB);
- for (int j=0;j<36;j++) fStack->ReadA24D32(addr[1] + CAENV965_OB);
- for (int j=0;j<8;j++) fStack->ReadA24D32(addr[2] + CAENV965_OB);// 4 channels connected
- fStack->Marker(0xFAFB);
-
- for (int i=0;i<nadc;i++){
- fStack->WriteA24D16(addr[i] + CAENV965_BS2,0x4); // clear module
- fStack->WriteA24D16(addr[i] + CAENV965_BC2,0x4);
- }
-
- //fStack->Print();
-
- VME_LED_settings(udev, 0,0,0,0); // Set Yellow LED to light with with USB out buffer not empty
- VME_LED_settings(udev, 1,1,0,0); // Set Red LED to light with NIM1
- VME_LED_settings(udev,2,0,0,0); // Set Green LED to light when stack is not empty
-
- Uint32_t vmereg;
- VME_register_read(udev,0x00,&vmereg);
- printf("VMUSB Firmware ID -> 0x%08X\n",vmereg);
-
- VME_register_read(udev,0x04,&vmereg);
- printf("VMUSB Global Mode -> 0x%08X\n",vmereg);
-
- vmereg=(vmereg&0xF000)\|0x0004;
- VME_register_write(udev,0x04,vmereg);
- VME_register_write(udev,0x08,0x00000080);
- VME_register_write(udev,0x28,0x0);
- VME_register_write(udev,0x2C,0x0);
- VME_register_write(udev,0x30,0x0);
- VME_register_write(udev,0x34,0x0);
- VME_register_write(udev,0x3C,0x000);
-
- int nb = fInit->Get(10000,stackdata);
- int ret= xxusb_stack_execute(udev,(Uint32_t *)stackdata);
- printf("Init::%d ret=%d\n",nb,ret);
- if (ret>0) for (int i=0;i<ret/2;i++) printf ("stackdata=0x%08X\n",stackdata[i]);
-
- int nb0= fStack->Get(10000,&stackwrite[0]);
- if (nb0>768) {
- fprintf(stderr,"nb0=%d > 768 error xxusb_stack_write\n", nb0);
- exit(-1);
- }
- nb =xxusb_stack_write(udev,0x2,(Uint32_t *) stackwrite);
- nb0=xxusb_stack_read(udev,0x2,(Uint32_t *) stackdata);
- for (int i=0;i<stackwrite[0]+1;i++){
- if (stackdata[i]!=stackwrite[i]) printf("%d %d init err %x %x\n",nb,nb0,stackwrite[i], stackdata[i]);
- }
-
- if (fMode==2) xxusb_register_write(udev,1,0x1); // Start DAQ mode
-
- printf("daq::init() \n");
- return 0;
-}
-
-int daq::connect(){
- VME_START(NULL);
- printf("daq::connect()\n");
- return 0;
-}
-
-int daq::disconnect(){
- /* zakljuci */
- VME_STOP();
- printf("daq::disconnect()\n");
- return 0;
-}
-
-int daq:: clear(){
- return 0;
-}
-
-inline int module_header(int recid,Uint32_t *data,int len){
- data[0] = recid;
- data[1] = (len >0)? len : 0 ;
- return data[1]+2;
-}
-
-
-int daq::event(unsigned int data, int maxn, int ctr, int print){
- int tout=200; /* 1/100 of a second */
- const int lsize=sizeof(unsigned Uint32_t);
-
-
- ctr[0]++;
- ctr[1]++;
-
- int count=0;
-
- switch (fMode){
- case 0:// normal calls
- {
- unsigned short clr= 0x4;
- unsigned int status=0;
- Uint32_t mdata;
-
- for (int i=0;i<2;i++){
- // wait for trg
- tmlnk (tout);
- do VME_A24D16_R( addr[i] + CAENV965_SR1, &status); while ( (status&0x1)==0 && timer_out==0 );
- tmulk();
- // readout data
- if (timer_out) return 0;
- int len=0;
-
- do {
- VME_A24D32_R(addr[i] + CAENV965_OB, &mdata);
- mdata=data[count++];
- len++;
- } while ( (mdata & 0x4000000)==0 && timer_out==0) ; // bit 26 EOB or not valid datum
- // clear
- VME_A24D16_W( addr[i] + CAENV965_BS2, &clr);
- VME_A24D16_W( addr[i] + CAENV965_BC2, &clr);
-
- if (count+2<maxn) {
- if (print) printf("V965 %3d\n",len);
- count+=module_header(0x130+i,&data[count],len);
- ctr[2]++;
- ctr[3]+=len;
- }
-
- timer_out=0;
- }
- }
- break;
- case 1:// stack execute
- {
- fStack->Get(10000,(int *)data);
- int ret=xxusb_stack_execute(udev,(Uint32_t *) data); //The first element of the array is the number of bytes.
- if (ret< 0 ) {
- printf ("xxusb_stack_execute error err=%d\n",ret); \
- count = 0;
- } else count= ret/lsize;
-
- }
- break;
- case 2:// stack load
- {
- int ret=xxusb_usbfifo_read(udev,(int *) data,BUFF_L,100);
- if (ret< 0 ) {
- if (ret!=-110) {
- printf ("xxusb_usbfifo_read error err=%d\n",ret);
- end();
- init();
- }
- count = 0;
- } else {
- if (0 && print && ret>0) {
- for (int i=0;i<100;i++) {
- printf ("%4d fifodata=0x%08X\n",i, data[i]);
- if (data[i]==0xFAFB) break;
- }
- /*
-
- 0 fifodata=0x0000000D
- 1 fifodata=0x00000049
- 2 fifodata=0x0000FFAB
- 3 fifodata=0x00002000
- 4 fifodata=0x00000200
- 5 fifodata=0x00004141
- 6 fifodata=0x00000000
- 7 fifodata=0x00004057
- 8 fifodata=0x00000010
- 9 fifodata=0x00004052
- 10 fifodata=0x00000001
- 11 fifodata=0x0000405C
- 12 fifodata=0x00000011
- 13 fifodata=0x0000405D
- 14 fifodata=0x00000002
- 15 fifodata=0x0000405E
- 16 fifodata=0x00000012
- 17 fifodata=0x0000401C
- 18 fifodata=0x00000003
- 19 fifodata=0x0000402F
- 20 fifodata=0x00000013
- 21 fifodata=0x00004024
- 22 fifodata=0x00000004
- 23 fifodata=0x00004076
- 24 fifodata=0x00000014
- 25 fifodata=0x0000412F
- 26 fifodata=0x00000005
- 27 fifodata=0x0000404C
- 28 fifodata=0x00000015
- 29 fifodata=0x00004132
- 30 fifodata=0x00000006
- 31 fifodata=0x00004044
- 32 fifodata=0x00000016
- 33 fifodata=0x0000404A
- 34 fifodata=0x00000007
- 35 fifodata=0x0000409B
- 36 fifodata=0x00000017
- 37 fifodata=0x000040F1
- 38 fifodata=0x00000008
- 39 fifodata=0x00004087
- 40 fifodata=0x00000018
- 41 fifodata=0x00004173
- 42 fifodata=0x00000009
- 43 fifodata=0x0000404C
- 44 fifodata=0x00000019
- 45 fifodata=0x0000406C
- 46 fifodata=0x0000000A
- 47 fifodata=0x00004070
- 48 fifodata=0x0000001A
- 49 fifodata=0x0000406E
- 50 fifodata=0x0000000B
- 51 fifodata=0x00004014
- 52 fifodata=0x0000001B
- 53 fifodata=0x000040B7
- 54 fifodata=0x0000000C
- 55 fifodata=0x000040A9
- 56 fifodata=0x0000001C
- 57 fifodata=0x00004048
- 58 fifodata=0x0000000D
- 59 fifodata=0x00004118
- 60 fifodata=0x0000001D
- 61 fifodata=0x0000409D
- 62 fifodata=0x0000000E
- 63 fifodata=0x0000405B
- 64 fifodata=0x0000001E
- 65 fifodata=0x00004285
- 66 fifodata=0x0000000F
- 67 fifodata=0x00004159
- 68 fifodata=0x0000001F
- 69 fifodata=0x00000035
- 70 fifodata=0x00000400
- 71 fifodata=0x00000035
- 72 fifodata=0x00000600
- 73 fifodata=0x00000035
- 74 fifodata=0x0000FAFB
-
-
- */
- }
- if (print) printf("------------------ret=%d data[0]=%d\n",ret,(int)data[0]);
- count= ret/lsize;
- ctr[2]+=data[0];
- ctr[3]+=count;
- }
- }
- break;
- }
- return count*lsize;
-}
-
-int daq::end(){
-
- xxusb_register_write(udev,1,0x0); // Stop DAQ mode
- while (xxusb_usbfifo_read(udev,(int *) stackdata,BUFF_L,30)>0);
- printf("daq::end()\n");
- return 0;
-}
-
-daq::daq(){
- fMode = 2;
- fPedestal=255;
- for (int i=0;i<128;i++){
- if (i<72) fThreshold.push_back(0);
- else fThreshold.push_back(0x1<<8); // samo 4 kanali na zadnjem modulu so enablani
- }
- fThresholdEnable=0;
- fStop=0;
- fInit=NULL;
- fStack=NULL;
- connect();
-}
-
-daq::~daq(){
-disconnect();
-}
-
-#ifdef MAIN
-/* ------------------- CatchSig ----------------- */
-int ctrlcflag=0;
-
-void SigInt (int sig)
-{
- ctrlcflag = 1;
- timer_out=1;
-}
-
-int main (int argc, char **argv){
- // intercept routine
- if (signal (SIGINT, SigInt) == SIG_ERR) {
- perror ("sigignore");
- }
-
- // print welcome message
- time_t t,told, tstart, tstop;
- time(&t);
- fprintf(stdout,"#############################################\n");
- fprintf(stdout,"Program %s version %2.1f\n",argv[0], VERSION);
- fprintf(stdout,"Compiled on %s %s\n",__DATE__, __TIME__);
- fprintf(stdout,"Runtime %s \n",ctime(&t));
- fprintf(stdout,"#############################################\n");
-
-
- int neve=-1;
- char cfname[100]="test.dat";
- char *fname=cfname;
- char *fpedname=NULL;
-
-#define BSIZE 10000
- Uint32_t data[10000];
-
-
- daq *d= new daq();
- int c;
-
- while ((c = getopt (argc, argv, "p:n:t:o:")) != -1)
- switch (c)
- {
- case 'o':
- sprintf(fname ,"%s", optarg);
- if (fexist(fname)==1){
- fprintf(stdout,"Error !\n");
- fprintf(stdout,"File %s already exist. Appending ....\n",fname);
- //fprintf(stdout,"Remove the file and restart !!!\n");
- //exit(0);
- }
- break; // input file
- case 'n':
- neve = atoi(optarg); // negative argument time ( in s )limited event loop
- break;
- case 't':
- {
-
- sprintf(fpedname ,"%s", optarg);
- FILE *fped=fopen(fpedname,"r");
- int j=0;
- int ndim=400;
- char line[ndim];
- int val=0;
- while (fgets(line,ndim,fped)!=NULL){
- sscanf(line,"%d",&val);
- d->fThreshold[j++]=val;
- }
- d->fThresholdEnable=1;
- //fclose(fped);
- fclose(fped);
- break;
- }
- case 'p':
- gPedestal = atoi(optarg); // injected charge to the qdc
- break;
- }
-
- if (argc==1) {
- fprintf(stdout,"Usage: %s -o [filename] -n [number of events] -t [thresholdfile] -p <qdc inject charge>\n negative number of events = acq time in seconds\n",argv[0]);
- exit(-1);
- }
- //FILE *fp=fopen(fname,"a");
- gzFile fp=gzopen(fname,"a");
-
- d->init();
- d->clear();
-
- int hdr[4]={2}; // recid od run 11 naprej
- int i=0;
- int ntotal=0;
- int counters[30]={0,0,0,0,0, 0,0,0,0,0,0,0};
- char names[10][20]={"TRG","CAEN V965"};
- time(&t);
- tstart=t;
- tstop=tstart+360000;
- if (neve<-1) {
- tstop=tstart-neve;
- neve=-1;
- }
- for (i=0;i!=neve && !ctrlcflag && t<tstop;i++){
- time(&t);
- if (t!=told ) printf("%d in %2.2f min daq::event() %s\n",i, (double)(t-tstart)/60., ctime(&t));
- int nb=d->event(data,BSIZE, counters,t!=told);
- if (nb>0){
- // zapis v datoteko
- hdr[1]=nb+4*sizeof(int);
- hdr[2]=time(NULL);
- hdr[3]=i;
-
- //fwrite(hdr, sizeof(int),4 , fp);
- gzwrite(fp, hdr, sizeof(int)*4); //gzip
- // recid=1 do runa 10. ntotal += fwrite(data, sizeof(int),nb, fp);
- //ntotal += fwrite(data, 1,nb, fp);
- ntotal += gzwrite(fp, data, nb);
- told=t;
- } else i--;
- }
-
- d->end();
- delete d;
- printf("Number of Events: %d\n",i);
- if (ctrlcflag) printf("User Program termination CTRL-C\n");
- if (t>tstop ) printf("Timeout termination tstart# t>tstop: %d# %d >%d\n",(int)t, (int)tstart, (int) tstop);
-
-
- //fclose(fp);
- gzclose(fp);
- fprintf(stdout,"%d bytes written to %s\nCounts:\n", (int) (ntotal*sizeof(int)),fname);
- for (i=0;i<2;i++) fprintf(stdout,"%s\t%d\t%d\n",names[i],counters[2i],counters[2i+1]) ;
-
-
- return 0;
-}
-#endif
Index: petdaqfmf/.root_hist
===================================================================
--- petdaqfmf/.root_hist (revision 111)
+++ petdaqfmf/.root_hist (nonexistent)
@@ -1,99 +0,0 @@
-TBrowser tt
-.q
-TBrowser d
-TFile *_file0 = TFile::Open("test100.root")
-ach0->Draw()
-.q
-TFile *_file0 = TFile::Open("test50.root")
-ach0->Draw()
-.q
-TFile *_file0 = TFile::Open("test150.root")
-ach0->Draw()
-TFile *_file0 = TFile::Open("test250.root")
-ach0->Draw()
-TFile *_file0 = TFile::Open("test200.root")
-ach0->Draw()
-TFile *_file0 = TFile::Open("test150.root")
-ach0->Draw()
-TFile *_file0 = TFile::Open("test100.root")
-ach0->Draw()
-TFile *_file0 = TFile::Open("test50.root")
-ach0->Draw()
-.q
-TFile *_file0 = TFile::Open("test80.root")
-ach0->Draw()
-ach0->Draw()
-ach1->Draw()
-ach2->Draw()
-ach3->Draw()
-ach4->Draw()
-ach5->Draw()
-ach6->Draw()
-ach7->Draw()
-ach8->Draw()
-ach9->Draw()
-ach10->Draw()
-ach11->Draw()
-ach12->Draw()
-ach13->Draw()
-ach14->Draw()
-ach15->Draw()
-ach16->Draw()
-ach15->Draw()
-.q
-TFile *_file0 = TFile::Open("test80_reversed.root")
-ach15->Draw()
-ach1->Draw()
-ach2->Draw()
-ach3->Draw()
-ach4->Draw()
-ach4->Draw()
-.q
-TFile *_file0 = TFile::Open("test.root")
-ach4->Draw()
-1->Draw()
-a1->Draw()
-ach5->Draw()
-ach5->Draw()
-ach7->Draw()
-ach16->Draw()
-ach18->Draw()
-ach36->Draw()
-.q
-TFile *_file0 = TFile::Open("test1.root")
-ach7->Draw()
-ach17->Draw()
-ach7->Draw()
-.q
-TFile *_file0 = TFile::Open("test.root")
-ach7->Draw()
-ach27->Draw()
-ach17->Draw()
-ach18->Draw()
-ach16->Draw()
-ach15->Draw()
-ach14->Draw()
-ach13->Draw()
-.ls
-sumadc1->Draw()
-sumadc0->Draw()
-cadc0->Draw()
-pmt0->Draw()
-pmt1->Draw()
-pmt0->Draw()
-sumadc0->Draw()
-.q
-TFile *_file0 = TFile::Open("test_reversed.root")
-sumadc0->Draw()
-tbrowser
-TBrowser
-TBrowser jj
-.q
-TFile *_file0 = TFile::Open("test850.root")
-ach14->Draw()
-ach11->Draw()
-ach0->Draw()
-ach15->Draw()
-ach16->Draw()
-ach15->Draw()
-.q
Index: petdaqfmf/wienvme_dll.h
===================================================================
--- petdaqfmf/wienvme_dll.h (revision 111)
+++ petdaqfmf/wienvme_dll.h (nonexistent)
@@ -1,53 +0,0 @@
-#ifndef _WIENVME_DLL_H
-#define _WIENVME_DLL_H
-
-#include "libxxusb.h"
-
-extern usb_dev_handle *udev;
-
-
-
-int VME_start (char*);
-int VME_close (int);
-int VME_stop (void);
-int VME_reset (void);
-
-
-int VME_read16 (Uint32_t, void*);
-int VME_read32 (Uint32_t, void*);
-
-int VME_write16 ( Uint32_t, void*);
-int VME_write32 ( Uint32_t, void*);
-
-#define VME_START(NODE) VME_start((NODE))
-#define VME_STOP() VME_stop()
-#define VME_RESET() VME_reset()
-
-#define VME_A24D16_R(VME,DATA) VME_read16( (VME), (DATA))
-#define VME_A24D32_R(VME,DATA) VME_read32( (VME), (DATA))
-
-#define VME_A24D16_W(VME,DATA) VME_write16( (VME), (DATA))
-#define VME_A24D32_W(VME,DATA) VME_write32( (VME), (DATA))
-
-#define VME_A32D16_R(VME,DATA) VME_read16( (VME), (DATA))
-#define VME_A32D32_R(VME,DATA) VME_read32( (VME), (DATA))
-
-#define VME_A32D16_W(VME,DATA) VME_write16( (VME), (DATA))
-#define VME_A32D32_W(VME,DATA) VME_write32( (VME), (DATA))
-
-typedef unsigned short ADDRESS_MODIFIER;
-
-#define Std_Sup_Data (ADDRESS_MODIFIER)0x3d
-#define Std_Sup_Prog (ADDRESS_MODIFIER)0x3e
-#define Std_NoPriv_Data (ADDRESS_MODIFIER)0x39
-#define Std_NoPriv_Prog (ADDRESS_MODIFIER)0x3a
-
-#define Short_Sup (ADDRESS_MODIFIER)0x2d
-#define Short_NoPriv (ADDRESS_MODIFIER)0x29
-
-#define Ext_Sup_Data (ADDRESS_MODIFIER)0x0d
-#define Ext_Sup_Prog (ADDRESS_MODIFIER)0x0e
-#define Ext_NoPriv_Data (ADDRESS_MODIFIER)0x09
-#define Ext_NoPriv_Prog (ADDRESS_MODIFIER)0x0a
-
-#endif

/petdaqfmf/wienvme_dll.h
Property changes:
Deleted: svn:executable
Index: petdaqfmf/daq.h
===================================================================
--- petdaqfmf/daq.h (revision 111)
+++ petdaqfmf/daq.h (nonexistent)
@@ -1,24 +0,0 @@
-#ifndef _daq_h_
-#define _daq_h_
-#include <vector>
-class VmUsbStack;
-class daq {
-public:
- VmUsbStack * fStack;
- VmUsbStack * fInit;
- int fPedestal;
- int fThresholdEnable;
- std::vector<int> fThreshold;
- int fStop;
- int fMode;
- int clear();
- int end();
- int event(unsigned int , int,int, int );
- int init();
- int connect();
- int disconnect();
- daq();
- ~daq();
-};
-
-#endif
Index: petdaqfmf/VMEModule.hh
===================================================================
--- petdaqfmf/VMEModule.hh (revision 111)
+++ petdaqfmf/VMEModule.hh (nonexistent)
@@ -1,39 +0,0 @@
-/********************\
- VMEModule.hh
-
- update: 04/01/28
-
-\********************/
-
-#ifndef VMEMODULE_HH
-#define VMEMODULE_HH
-
-
-
-#include <stdio.h>
-#include <sys/types.h>
-#include "pcivme_ni.h"
-
-#define VMEA24 (unsigned short)0x39
-#define VMEA32 (unsigned short)0x09
-#define VMEA16 (unsigned short)0x29
-class VMEModule {
-protected:
- int m_fd;
- int m_vmeptr;
- caddr_t m_vmeaddr;
- size_t m_size;
- unsigned long m_baseaddress;
-public:
- VMEModule(int device, caddr_t vmeaddr, size_t size);
- ~VMEModule();
- unsigned long getBaseAddress() { return (unsigned long) m_baseaddress; }
- caddr_t getVmeAddress() { return m_vmeaddr; }
- void write32(unsigned long address, unsigned long value);
- unsigned long read32(unsigned long address);
-
- void write16(unsigned long address, unsigned short value);
- unsigned short read16(unsigned long address);
-};
-
-#endif
Index: petdaqfmf/README
===================================================================
--- petdaqfmf/README (revision 111)
+++ petdaqfmf/README (nonexistent)
@@ -1,2 +0,0 @@
-./daq -o [filename] -n [number of events] -t [thresholdfile] -p <qdc inject charge>
- negative number of events = acq time in seconds
Index: petdaqfmf/pcivme_ni.h
===================================================================
--- petdaqfmf/pcivme_ni.h (revision 111)
+++ petdaqfmf/pcivme_ni.h (nonexistent)
@@ -1,84 +0,0 @@
-#ifndef __PCIVME_NI_H__
-#define __PCIVME_NI_H__
-
-//-------------------------------------------------------------------------------------------
-// pcivme_ni.h - header for ni-labview shared library or dll for ARW pcivme interface
-// this library can also be used for other purposes aside from labview
-//
-// Copyright (C) 2002-2004 ARW Elektronik Germany
-//
-// this source code is published under LGPL (Open Source). You can use, redistrubute and
-// modify it unless this header is not modified or deleted. No warranty is given that
-// this software will work like expected.
-// This product is not authorized for use as critical component in life support systems
-// wihout the express written approval of ARW Elektronik Germany.
-//
-// Please announce changes and hints to ARW Elektronik
-//
-// $Log: pcivme_ni.h,v $
-// Revision 1.8 2004/08/13 19:23:45 klaus
-// conversion to kernel-version 2.6, released version 3.0
-//
-// Revision 1.7 2002/10/20 18:07:18 klaus
-// changed error handling
-//
-// Revision 1.6 2002/10/18 21:56:28 klaus
-// completed functional features, untested
-//
-// Revision 1.5 2002/10/18 21:56:28 klaus
-// completed functional features, untested
-//
-// Revision 1.4 2002/10/17 21:16:03 klaus
-// filled function bodies
-//
-// Revision 1.3 2002/10/17 21:16:03 klaus
-// filled function bodies
-//
-// Revision 1.2 2002/10/17 19:05:03 klaus
-// VME access is working through test to lib to driver
-//
-// Revision 1.1 2002/10/12 22:04:44 klaus
-// first work done
-//
-// what who when
-// first steps AR 17.11.1999
-// VMEerror new AR 07.01.2000
-// made LINUX shared library from windows template AR 12.10.2002
-//
-
-//-------------------------------------------------------------------------------------------
-// INCLUDES
-//
-#define BOOLEAN int
-#if !defined(TRUE) && !defined(FALSE)
- #define FALSE 0
- #define TRUE 1
-#endif
-
-//-------------------------------------------------------------------------------------------
-// PROTOTYPES
-//
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-int VMEopen(const char cszDeviceName, unsigned char ubAddressModifier, int pnHandle);
-int VMEinit(const char cszDeviceName, unsigned short nVMEMM, unsigned char ubAddressModifier, int pnHandle);
-int setAccessProperties(int nHandle, unsigned char bModifier, unsigned char bAccessType);
-int VMEread(int nHandle, unsigned long ulAddress, unsigned char ubAccessWidth, unsigned long ulElementCount, void *pvBuffer);
-int VMEwrite(int nHandle, unsigned long ulAddress, unsigned char ubAccessWidth, unsigned long ulElementCount, void *pvBuffer);
-int VMEaccessVIC(int nHandle, unsigned char ubAccessMode, unsigned short uwAddress, unsigned char *ubContent);
-int VMEreset(int nHandle);
-int VMETAS(int nHandle, unsigned long ulAddress, unsigned char *ubResult);
-int VMEcontrolInterrupt(int nHandle, BOOLEAN *bEnable);
-int VMEinterrupt(int nHandle, unsigned char *ubVector);
-int VMEsysfailGet(int nHandle, BOOLEAN *bResult);
-int VMEsysfailSet(int nHandle, BOOLEAN bForce);
-int VMEerror(int nHandle);
-int VMEclose(int nHandle);
-int GetLastError(int nHandle);
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __PCIVME_NI_H__ */
Index: petdaqfmf/wienvmeusb_dll.c
===================================================================
--- petdaqfmf/wienvmeusb_dll.c (revision 111)
+++ petdaqfmf/wienvmeusb_dll.c (nonexistent)
@@ -1,98 +0,0 @@
-#include <stdlib.h>
-#include <stdio.h>
-#include "pcivme_ni.h"
-#include "wienvme_dll.h"
-//----------- DEFINES -----------------------------------------------------
-#define DEVICENAME_LINUX "/dev/vmemm_1" // a device name 'template' for WINNT
-
-usb_dev_handle *udev;
-
-
-
-
-int VME_start (char* serial)
-{
-
- char serial_default[100];
- sprintf(serial_default, "VM0120");
- if (serial != NULL)
- udev = xxusb_serial_open(serial);
- else
- udev = xxusb_serial_open(serial_default);
- printf(" VME_start %s--->udev!=NULL ==>%d\n", serial, udev!=NULL);
- if (!udev) {
- printf(" Check usb udev permissions and restart! Exiting .....\n", serial, udev!=NULL);
- exit(-1);
- }
- return 0;
-}
-
-
-
-int VME_stop ()
-{
- if (udev) xxusb_device_close(udev);
-
-
- return 0;
-}
-
-short Address_Modifier= Std_NoPriv_Data;
-
-int VME_read16 (Uint32_t at, void* buff)
-{
- int result;
-
-/* D16 read */
-
- result = VME_read_16(udev, Address_Modifier, at , (Uint32_t *) buff);
- if (result <0) {
- printf("D16 read at 0x%X failed! err=%d\n", at,result);
- }
-// printf("0x%X, 0x%X, 0x%X, 0x%X\n", hHandle, at, n, * (unsigned short *) buff);
- return (result);
-}
-
-int VME_read32 (Uint32_t at, void* buff)
-{
- int result;
-
-/* D32 read */
-
- result = VME_read_32(udev, Address_Modifier, at , (Uint32_t *) buff);
- if (result < 0) {
- printf("D32 read at 0x%X failed err=%d!\n", at,result);
- }
- //printf("0x%X, 0x%X, 0x%X, 0x%X\n", hHandle, at, n, * (unsigned short *) buff);
- return (result);
-}
-
-int VME_write16 (Uint32_t at, void* buff)
-{
- int result;
- Uint32_t data= ((short )buff);
-
-/* D16 write */
-
- result = VME_write_16(udev, Address_Modifier, at, data );
- if (result<0) {
- printf("D16 write at 0x%X failed! err=%d\n", at,result);
- }
- return (result);
-}
-
-int VME_write32 ( Uint32_t at, void* buff)
-{
- int result;
- Uint32_t data= ((Uint32_t )buff);
-
-/* D32 write */
-
- result = VME_write_32(udev, Address_Modifier, at, data );
-
- if (result<0) {
- printf("D32 write at 0x%X failed! err=%d\n", at,result);
- }
- //printf("D32 write at 0x%lX buff=0x%X\n", at,((int*) buff)[0]);
- return (result);
-}

/petdaqfmf/wienvmeusb_dll.c
Property changes:
Deleted: svn:executable
Index: petdaqfmf/LinkDef.h
===================================================================
--- petdaqfmf/LinkDef.h (revision 111)
+++ petdaqfmf/LinkDef.h (nonexistent)
@@ -1,10 +0,0 @@
-#ifdef __CINT__
-
-#pragma link off all globals;
-#pragma link off all classes;
-#pragma link off all functions;
-
-#pragma link C++ class daq;
-
-#endif
-
Index: petdaqfmf/VmUsbStack.C
===================================================================
--- petdaqfmf/VmUsbStack.C (revision 111)
+++ petdaqfmf/VmUsbStack.C (nonexistent)
@@ -1,124 +0,0 @@
-#include <stdio.h>
-#include <vector>
-#include "VmUsbStack.h"
-
-VmUsbStack::VmUsbStack(){
- fStack.push_back(0x1);
- fStack.push_back(0x0);
-}
-
-VmUsbStack::~VmUsbStack(){
- fStack.clear();
-}
-
-int VmUsbStack::Get(int maxn, int *stack){
- for (int i=0;i<fStack.size();i++){
- if (i<maxn) stack[i]=fStack[i]; else return -1;
- }
- return fStack[0];
-}
-
-
-void VmUsbStack::Append(int cmd, int addr ){
- fStack.push_back(cmd & 0xFFFF);
- fStack.push_back(cmd >> 16);
- fStack.push_back(addr&0xFFFF);
- fStack.push_back((addr >> 16)& 0xFFFF);
- fStack[0]=fStack.size()-1;
-}
-
-void VmUsbStack::Append(int cmd, int addr , int data){
- Append( cmd, addr );
- fStack.push_back(data&0xFFFF);
- fStack.push_back((data >> 16)&0xFFFF);
- fStack[0] = fStack.size()-1;
-}
-
-void VmUsbStack::ReadA24D16(int addr ){
- Append(CMD_READ \| CMD_A24 , CMD_D16 \| addr);
-}
-
-void VmUsbStack::WriteA24D16(int addr, int data){
- return Append(CMD_WRITE \| CMD_A24,CMD_D16 \| addr, data);
-}
-
-void VmUsbStack::ReadA24D32(int addr ){
- Append(CMD_READ \| CMD_A24 , CMD_D32 \| addr);
-}
-
-void VmUsbStack::WriteA24D32(int addr, int data){
- return Append(CMD_WRITE \| CMD_A24 , CMD_D32 \| addr, data);
-}
-
-void VmUsbStack::ReadA32D16(int addr ){
- Append(CMD_READ \| CMD_A32 , CMD_D16\| addr);
-}
-
-void VmUsbStack::WriteA32D16(int addr, int data){
- return Append(CMD_WRITE \| CMD_A32 , CMD_D16 \| addr, data);
-}
-
-void VmUsbStack::ReadA32D32(int addr ){
- Append(CMD_READ \| CMD_A32 , CMD_D32 \| addr);
-}
-
-void VmUsbStack::WriteA32D32(int addr, int data){
- return Append(CMD_WRITE \| CMD_A32 , CMD_D32\| addr, data);
-}
-
-
-void VmUsbStack::Marker(int marker){
- return Append(CMD_MRK, marker);
-}
-
-void VmUsbStack::ConditionalRead(int adr_mod,int d16d32, int addr, int bmask){
- Append(CMD_READ\| CMD_HD \| adr_mod ,addr);
- Append(CMD_READ\| CMD_HD \| CMD_HM \|adr_mod, d16d32 \|addr,bmask);
-}
-
-void VmUsbStack::RepeatRead(int adr_mod,int d16d32, int baseaddr, int n, int increment){
- for (int i=0;i<n;i++) Append( adr_mod \| CMD_READ, d16d32 +baseaddr + i*increment);
-}
-void VmUsbStack::RepeatWrite(int adr_mod,int d16d32,int baseaddr, int n, int increment, int data){
- for (int i=0;i<n;i++) Append( adr_mod \| CMD_WRITE,d16d32 + baseaddr+i*increment, data);
-}
-
-void VmUsbStack::Print(){
- for (int i=0; i < fStack.size();i++) printf("0x%04x\n",fStack[i]);
- printf("%d %d __________________________________\n",fStack.size(),fStack[0]);
-}
-
-#ifdef MAIN
-#include "CAENV965_DEF.h"
-#define CAEN_V965 0x340000
-
-int main(){
-// INIT stackdata
-int geo=1,fPedestal=255;
-VmUsbStack *init=new VmUsbStack();
-init->Write(CAEN_V965 + CAENV965_CRN, 0x0);
-init->Write(CAEN_V965 + CAENV965_GEO, geo);
-init->RepeatWrite( CAEN_V965 + CAENV965_THM, 32, 0x02,0x0); // threshold/kill for 32 channels, 2*i addr increment
-init->Write( CAEN_V965 + CAENV965_BS1, 0x80 ); // soft reset
-init->Write( CAEN_V965 + CAENV965_BC1, 0x80 ); // soft reset
-init->Write( CAEN_V965 + CAENV965_PED, fPedestal ); // pedestal
-init->Write(CAEN_V965 + CAENV965_BS2,0x5000);
-init->Write(CAEN_V965 + CAENV965_BS2,0x4); // clear module
-init->Write(CAEN_V965 + CAENV965_BC2,0x4);
-init->Print();
-
-// READOUT stackdata
-VmUsbStack *stack=new VmUsbStack();
-stack->Write(CAEN_V965 + CAENV965_BS2,0x4); // clear module
-stack->Write(CAEN_V965 + CAENV965_BC2,0x4);
-stack->ConditionalRead(CAEN_V965 + CAENV965_SR1,0x1); // TRG wait : loop until bit 0 is on
-stack->ConditionalRead(CAEN_V965 + CAENV965_OB ,0x4000000) ; // loop until bit 26 is on, read data
-stack->Marker(0xFAFB);
-stack->Print();
-
- int st[1000];
- int nb= stack->Get(1000,st);
- for (int i=0;i<nb;i++) if (st[i]!=stack->fStack[i]) printf("error i=%d 0x%04x 0x%04x \n",i,st[i],stack->fStack[i] );
- return 0;
-}
-#endif
Index: petdaqfmf/CAENV965_DEF.h
===================================================================
--- petdaqfmf/CAENV965_DEF.h (revision 111)
+++ petdaqfmf/CAENV965_DEF.h (nonexistent)
@@ -1,22 +0,0 @@
-#ifndef _CAENV965_DEF_H
-#define _CAENV965_DEF_H
-
-#define CAENV965_OB 0x0
-#define CAENV965_FW 0x1000
-#define CAENV965_GEO 0x1002
-#define CAENV965_MCA 0x1004
-#define CAENV965_BS1 0x1006
-#define CAENV965_BC1 0x1008
-#define CAENV965_SR1 0x100E
-#define CAENV965_CR1 0x1010
-#define CAENV965_ADH 0x1012
-#define CAENV965_ADL 0x1014
-#define CAENV965_SR2 0x1022
-#define CAENV965_BS2 0x1032
-#define CAENV965_BC2 0x1034
-#define CAENV965_CRN 0x103C
-#define CAENV965_ECR 0x1040
-#define CAENV965_PED 0x1060
-#define CAENV965_THM 0x1080
-
-#endif
Index: petdaqfmf/gui.C
===================================================================
--- petdaqfmf/gui.C (revision 111)
+++ petdaqfmf/gui.C (nonexistent)
@@ -1,455 +0,0 @@
-// By ROOT version 5.17/02 on 2008-03-13 06:46:41
-
-#ifndef ROOT_TGDockableFrame
-#include "TGDockableFrame.h"
-#endif
-#ifndef ROOT_TGMenu
-#include "TGMenu.h"
-#endif
-#ifndef ROOT_TGMdiDecorFrame
-#include "TGMdiDecorFrame.h"
-#endif
-#ifndef ROOT_TG3DLine
-#include "TG3DLine.h"
-#endif
-#ifndef ROOT_TGMdiFrame
-#include "TGMdiFrame.h"
-#endif
-#ifndef ROOT_TGMdiMainFrame
-#include "TGMdiMainFrame.h"
-#endif
-#ifndef ROOT_TGuiBldHintsButton
-#include "TGuiBldHintsButton.h"
-#endif
-#ifndef ROOT_TGMdiMenu
-#include "TGMdiMenu.h"
-#endif
-#ifndef ROOT_TGListBox
-#include "TGListBox.h"
-#endif
-#ifndef ROOT_TGNumberEntry
-#include "TGNumberEntry.h"
-#endif
-#ifndef ROOT_TGScrollBar
-#include "TGScrollBar.h"
-#endif
-#ifndef ROOT_TGuiBldHintsEditor
-#include "TGuiBldHintsEditor.h"
-#endif
-#ifndef ROOT_TRootBrowser
-#include "TRootBrowser.h"
-#endif
-#ifndef ROOT_TGFrame
-#include "TGFrame.h"
-#endif
-#ifndef ROOT_TGFileDialog
-#include "TGFileDialog.h"
-#endif
-#ifndef ROOT_TGShutter
-#include "TGShutter.h"
-#endif
-#ifndef ROOT_TGButtonGroup
-#include "TGButtonGroup.h"
-#endif
-#ifndef ROOT_TGCanvas
-#include "TGCanvas.h"
-#endif
-#ifndef ROOT_TGFSContainer
-#include "TGFSContainer.h"
-#endif
-#ifndef ROOT_TGButton
-#include "TGButton.h"
-#endif
-#ifndef ROOT_TGuiBldEditor
-#include "TGuiBldEditor.h"
-#endif
-#ifndef ROOT_TGTextEdit
-#include "TGTextEdit.h"
-#endif
-#ifndef ROOT_TGFSComboBox
-#include "TGFSComboBox.h"
-#endif
-#ifndef ROOT_TGLabel
-#include "TGLabel.h"
-#endif
-#ifndef ROOT_TGView
-#include "TGView.h"
-#endif
-#ifndef ROOT_TRootGuiBuilder
-#include "TRootGuiBuilder.h"
-#endif
-#ifndef ROOT_TGTab
-#include "TGTab.h"
-#endif
-#ifndef ROOT_TGListView
-#include "TGListView.h"
-#endif
-#ifndef ROOT_TGSplitter
-#include "TGSplitter.h"
-#endif
-#ifndef ROOT_TGStatusBar
-#include "TGStatusBar.h"
-#endif
-#ifndef ROOT_TGListTree
-#include "TGListTree.h"
-#endif
-#ifndef ROOT_TGToolTip
-#include "TGToolTip.h"
-#endif
-#ifndef ROOT_TGToolBar
-#include "TGToolBar.h"
-#endif
-#ifndef ROOT_TRootEmbeddedCanvas
-#include "TRootEmbeddedCanvas.h"
-#endif
-#ifndef ROOT_TCanvas
-#include "TCanvas.h"
-#endif
-#ifndef ROOT_TGuiBldDragManager
-#include "TGuiBldDragManager.h"
-#endif
-
-#include "Riostream.h"
-#include "TApplication.h"
-#include "TROOT.h"
-#include "TSystem.h"
-#include "TGraph.h"
-#include "TH1F.h"
-#include "daq.h"
-
-TGTextButton *gTextButton[10];
-TCanvas *fCanvas;
-TGMainFrame *fMain;
-TGTextEntry *gFilename;
-TGNumberEntry *gPedestal;
-TGNumberEntry *gCh;
-TGNumberEntry *gMaxEve;
-TGNumberEntry *gNeve;
-TGTextEntry *gTimeDisplay;
-TGCheckButton *gCheckButton;
-
-
-TRootEmbeddedCanvas *gCanvas;
-#define MAXCH 32
-TH1F* gHisto[MAXCH];
-daq * gDaq;
-#define WINDOW_NAME "ADC CAEN V965"
-//----------------------------------------------------
-int UIRDimming(int state){
- switch (state) {
- case 0:
- gTextButton[0]->SetEnabled(0);
- gTextButton[1]->SetEnabled(1);
- gTextButton[2]->SetEnabled(0);
-
- break;
-
- case 1:
- gTextButton[0]->SetEnabled(0);
- gTextButton[1]->SetEnabled(0);
- gTextButton[2]->SetEnabled(1);
-
- break;
-
- case 2:
- gTextButton[0]->SetEnabled(1);
- gTextButton[1]->SetEnabled(1);
- gTextButton[2]->SetEnabled(0);
- break;
-
- default:
- break;
- }
- return 0;
-}
-
-int fDebug;
-void GetDebug(){
- if ( gCheckButton->IsOn() ) fDebug=1;
- else fDebug=0;
-}
-
-int GetTime(char *x){
- int ret;
- time_t rawtime;
- static time_t oldtime=-1;
- struct tm * timeinfo;
- time ( &rawtime );
- ret = (oldtime==rawtime);
- timeinfo = localtime ( &rawtime );
- sprintf(x,"%s",asctime (timeinfo));
- int len=strlen(x);
- if (len) x[len-1]=0;
- return ret;
-}
-void MyTimer(){
- char cmd[100];
- if (!GetTime(cmd)){
- if (gTimeDisplay) gTimeDisplay->SetText(cmd);
- if (gCanvas){
- gCanvas->GetCanvas()->Modified();
- gCanvas->GetCanvas()->Update();
- }
- }
-}
-
-//----------------------------------------------------
-// thread function
-int gStop=0;
-#define BSIZE 10000
-unsigned long gBuf[BSIZE];
-void Run(){
- printf("Start of Run\n" );
-
- // odpremo datoteko za pisanje
- int counters[10]={0,0,0,0,0, 0,0,0,0,0};
- char names[20][20]={"CAENV 1290","CAEN V965","LC2277","LC2277","LC2277"};
-
- char fname[128];
- sprintf(fname,"%s.dat",gFilename->GetText());
- FILE *fp=fopen(fname,"w");
- int neve = (int) gMaxEve->GetNumber();
- int hdr[4]={1};
-
- if (gDaq) gDaq->fStop=0;
- // zajem zeljenega kolicine podatkov
- for (int n=0;n<neve;n++){
- if (!gDaq) break;
- int nb = gDaq->event(gBuf,BSIZE,counters,1);
- if (gDaq->fStop) break;
- // zapis v datoteko
- hdr[1]=nb+4*sizeof(int);
- hdr[2]=time(NULL);
- hdr[3]=n;
-
- fwrite(hdr, sizeof(int),4 , fp);
- if (nb) fwrite(gBuf, 1,nb, fp);
- // napolni histograme
- int nint= nb/4;
-
- int ii=0;
-
- while (ii<nint){
-
- int recid=gBuf[ii++];
- int len =gBuf[ii++];
- unsigned int dbuf= (unsigned int )&gBuf[ii];
- if (n%1000==0) printf("%d 0x%03x Len=%d\n",n,recid,len);
- unsigned short edge;
-
- if (recid==0x130){
- for (int i=0; i<len; i++) {
- int dtype=(dbuf[i]>>25)&0x3;
- if (dtype==0) {
- int ch=(dbuf[i]>>17)&0xf;
- if (2*ch<MAXCH) {
- int rg=(dbuf[i]>>16)&0x1;
- int adc=dbuf[i]&0xfff;
- gHisto[2*ch+rg]->Fill(adc);
- // printf("V965 0x%08x nev=%4d %d. [ch=%2d] range=%d data=%d \n",dbuf[i],n,i,ch,rg,adc);
- }
- }
- }
- } // if (recid==0x130)
- ii+=len;
- }
- /*
- // decode
-
- int nint=nb/sizeof(int);
-
- for (int i=0;i<nint;i++){
- unsigned short tdc = gBuf[i]&0xFFFF;
- unsigned short ch = (gBuf[i] >> 17 ) &0x1F;
- unsigned short edge = (gBuf[i] >> 16 ) &0x1;
- if (edge && ch < MAXCH) gHisto[ch]->Fill(tdc);
- if (fDebug) printf("nev=%4d %d. [ch=%2d] egde=%d data=%d",n,i,ch,edge,tdc);
- }
- */
- gSystem->ProcessEvents();
- MyTimer();
- gNeve->SetNumber(n);
- }
- fclose(fp);
- UIRDimming(2);
- printf("End of MyThread neve=%d\n",neve);
-
-}
-
-
-int save2ascii(){
- if (!gHisto[0]) return 0;
- char fname[128];
- sprintf(fname,"%s.txt",gFilename->GetText());
- FILE *fp= fopen(fname, "w");
- fprintf(fp, "%s\n",WINDOW_NAME);
- char cmd[128];
- GetTime(cmd);
- fprintf(fp, "Shranjeno: %s\n\n", cmd );
- fprintf(fp, "Kanal hid=") ;
- for (int j=0;j<MAXCH;j++) fprintf(fp, "%d\t",j);
- fprintf(fp, "\n-------------------------------------------------\n");
- for (int i=0;i<gHisto[0]->GetNbinsX();i++){
- fprintf(fp, "%d\t",i);
- for (int j=0;j<MAXCH;j++) fprintf(fp, "%d\t",(int) gHisto[j]->GetBinContent(i+1));
- fprintf(fp, "\n");
- }
- fclose(fp);
- printf("Histogram content is dumped to the file %s\n",fname);
- return 0;
- }
-
-void MyEventHandler(int i){
-
- UIRDimming(i);
-
- switch (i) {
- case 0: // Init
- gDaq->fPedestal = (int)(gPedestal->GetNumber());
- gDaq->init();
- break;
- case 1: // Start
- Run();
- case 2: // Stop
- gDaq->fStop=1;
- case 3: // ReDraw
- gCanvas->GetCanvas()->Modified();
- gCanvas->GetCanvas()->Update();
- break;
- case 4: // Clear
- for (int j=0;j<MAXCH;j++) if (gHisto[j]) gHisto[j]->Reset();
- break;
- case 5: // Save
- save2ascii();
- break;
- case 6: // Print
- gCanvas->GetCanvas()->SaveAs("zivljenjski_cas_mionov.pdf");
- break;
- case 7: // exit
- gApplication->Terminate(0);
- break;
- }
-
-}
-
-int Redraw(long val=0){
- unsigned int ch= (unsigned int)(gCh->GetNumber());
- if (ch<MAXCH && gHisto[ch]) {
- gCanvas->GetCanvas()->cd();
- gHisto[ch]->Draw();
- gCanvas->GetCanvas()->Modified();
- gCanvas->GetCanvas()->Update();
- } else {
- if (gCh->GetNumber()>=MAXCH) gCh->SetNumber(MAXCH-1);
- if (gCh->GetNumber()< 0) gCh->SetNumber(0);
- }
- return 0;
-}
-//----------------------------------------------------
-
-int gui(){
-
- for (int i=0;i<MAXCH;i++){
- char hname[50];
- sprintf(hname,"Ch. %d Rg.%d;ADC;N",i/2,i%2);
- char hn[50];
- sprintf(hn,"ch%d",i);
- gHisto[i] = new TH1F(hn,hname,4096,-0.5,4095.5);
- }
- gDaq= new daq();
- fMain = new TGMainFrame(0,800,800);
- TGHorizontalFrame *fH=new TGHorizontalFrame(fMain,800,400);
- //------------------------------------------------------------
- TGLayoutHints *f0= new TGLayoutHints(kLHintsLeft \| kLHintsTop,2,2,2,2);
- TGLayoutHints *layout2= new TGLayoutHints(kLHintsLeft \| kLHintsTop,20,20,20,20);
- // gumbi
-
- int nbut=8;
- const char *names[10]={"Init","Start","Stop","Refresh","Clear","Save", "Print" , "Exit"};
- for (int i=0;i<nbut;i++){
-
- gTextButton[i]= new TGTextButton(fH, names[i]);
- gTextButton[i]->SetTextJustify(36);
- gTextButton[i]->SetMargins(0,0,0,0);
- gTextButton[i]->SetWrapLength(-1);
- gTextButton[i]->Resize(50,22);
- fH->AddFrame(gTextButton[i], layout2);
- char cmd[50];
- sprintf(cmd,"MyEventHandler(=%d)",i);
- TQObject::Connect(gTextButton[i],"Clicked()",0,0,cmd);
- }
-
- gCheckButton = new TGCheckButton( fH,"Debug");
- gCheckButton->Resize(50,22);
- TQObject::Connect(gCheckButton,"Clicked()", 0, 0 , "GetDebug()");
- gCheckButton->SetState(kButtonDown);
- fH->AddFrame(gCheckButton, f0);
-
- fMain->AddFrame(fH , f0);
- //---------------------------------------------------------
- // ura
- TGLabel *lab1;
- fH=new TGHorizontalFrame(fMain,800,200);
- lab1 = new TGLabel( fH ,"Time:");
- fH->AddFrame(lab1, f0);
- gTimeDisplay = new TGTextEntry( fH,"");
- gTimeDisplay->Resize(200,22);
- fH->AddFrame(gTimeDisplay, f0);
- fMain->AddFrame(fH , f0);
- //---------------------------------------------------------
- // inputi
- fH=new TGHorizontalFrame(fMain,800,200);
- lab1 = new TGLabel( fH ,"Filename:");
- fH->AddFrame(lab1, f0);
- gFilename = new TGTextEntry( fH,"filename");
- gFilename->Resize(200,22);
- fH->AddFrame(gFilename, f0);
- fMain->AddFrame(fH , f0);
- //---------------------------------------------------------
- fH=new TGHorizontalFrame(fMain,800,200);
- lab1 = new TGLabel( fH ,"ADC Pedestal:");
- fH->AddFrame(lab1, f0);
- gPedestal = new TGNumberEntry( fH,100);
- gPedestal->Resize(100,22);
- fH->AddFrame(gPedestal, f0);
- fMain->AddFrame(fH , f0);
- //---------------------------------------------------------
- fH=new TGHorizontalFrame(fMain,800,200);
- lab1 = new TGLabel( fH ,"N of events to acquire:");
- fH->AddFrame(lab1, f0);
- gMaxEve = new TGNumberEntry( fH,10000);
- gMaxEve->Resize(100,22);
- fH->AddFrame(gMaxEve, f0);
- fMain->AddFrame(fH , f0);
- //---------------------------------------------------------
- fH=new TGHorizontalFrame(fMain,800,200);
- lab1 = new TGLabel( fH ,"Number of events:");
- fH->AddFrame(lab1, f0);
- gNeve = new TGNumberEntry( fH,0);
- gNeve->Resize(100,22);
- fH->AddFrame(gNeve, f0);
- fMain->AddFrame(fH , f0);
- //---------------------------------------------------------
- // canvas
- fH=new TGHorizontalFrame(fMain,800,200);
- gCanvas = new TRootEmbeddedCanvas ("gCanvas",fH,800,400);
- fH->AddFrame(gCanvas, f0);
- fMain->AddFrame(fH , f0);
- //------------------------------------------------------------
- fH=new TGHorizontalFrame(fMain,800,200);
- lab1 = new TGLabel( fH ,"Channel number (0..31):");
- fH->AddFrame(lab1, f0);
- gCh = new TGNumberEntry( fH,0);
- fH->AddFrame(gCh, f0);
- TQObject::Connect(gCh,"ValueSet(Long_t)",0,0,"Redraw(Long_t )");
-
- fMain->AddFrame(fH , f0);
- //------------------------------------------------------------
- fMain->SetWindowName(WINDOW_NAME);
- fMain->MapSubwindows();
- fMain->Resize(fMain->GetDefaultSize());
- fMain->MapWindow();
- Redraw();
- GetDebug();
- return 0;
-}
Index: petdaqfmf/VmUsbStack.h
===================================================================
--- petdaqfmf/VmUsbStack.h (revision 111)
+++ petdaqfmf/VmUsbStack.h (nonexistent)
@@ -1,45 +0,0 @@
-#ifndef VMUSBSTACK_H
-#define VMUSBSTACK_H
-#define CMD_WRITE 0x000
-#define CMD_READ 0x100
-#define CMD_A24 0x039
-#define CMD_A32 0x009
-#define CMD_HM 0x80000
-#define CMD_HD 0x20000
-#define CMD_MRK 0x2000
-#define CMD_DLY 0x8000
-#define CMD_BLT 0xFF000000
-
-#define CMD_D16 1
-#define CMD_D32 0
-
-#include <vector>
-class VmUsbStack {
- public:
- VmUsbStack();
- ~VmUsbStack();
- std::vector<int> fStack;
- void Append(int cmd, int marker);
- void Append(int cmd, int addr, int data);
-
- void Marker(int marker);
- void WriteA32D16(int addr, int data);
- void ReadA32D16(int addr );
- void WriteA32D32(int addr, int data);
- void ReadA32D32(int addr );
-
- void WriteA24D16(int addr, int data);
- void ReadA24D16(int addr );
- void WriteA24D32(int addr, int data);
- void ReadA24D32(int addr );
-
- void ConditionalRead(int am ,int d16d32,int addr, int data);
- void RepeatRead(int addr_modifier,int d16d32, int baseaddr, int n, int increment);
- void RepeatWrite(int addr_modifier,int d16d32, int baseaddr, int n, int increment, int data);
-
- int Get(int maxn, int *stack);
- void Print();
-};
-
-
-#endif
Index: petdaqfmf/Dict.h
===================================================================
--- petdaqfmf/Dict.h (revision 111)
+++ petdaqfmf/Dict.h (nonexistent)
@@ -1,44 +0,0 @@
-/********************************************************************
-* Dict.h
-* CAUTION: DON'T CHANGE THIS FILE. THIS FILE IS AUTOMATICALLY GENERATED
-* FROM HEADER FILES LISTED IN G__setup_cpp_environmentXXX().
-* CHANGE THOSE HEADER FILES AND REGENERATE THIS FILE.
-********************************************************************/
-#ifdef __CINT__
-#error Dict.h/C is only for compilation. Abort cint.
-#endif
-#include <stddef.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <math.h>
-#include <string.h>
-#define G__ANSIHEADER
-#define G__DICTIONARY
-#include "G__ci.h"
-extern "C" {
-extern void G__cpp_setup_tagtableDict();
-extern void G__cpp_setup_inheritanceDict();
-extern void G__cpp_setup_typetableDict();
-extern void G__cpp_setup_memvarDict();
-extern void G__cpp_setup_globalDict();
-extern void G__cpp_setup_memfuncDict();
-extern void G__cpp_setup_funcDict();
-extern void G__set_cpp_environmentDict();
-}
-
-
-#include "TObject.h"
-#include "TMemberInspector.h"
-#include "daq.h"
-#include <algorithm>
-namespace std { }
-using namespace std;
-
-#ifndef G__MEMFUNCBODY
-#endif
-
-extern G__linked_taginfo G__DictLN_vectorlEintcOallocatorlEintgRsPgR;
-extern G__linked_taginfo G__DictLN_VmUsbStack;
-extern G__linked_taginfo G__DictLN_daq;
-
-/* STUB derived class for protected member access */
Index: petdaqfmf/vme.h
===================================================================
--- petdaqfmf/vme.h (revision 111)
+++ petdaqfmf/vme.h (nonexistent)
@@ -1,6 +0,0 @@
-#ifndef _VME_H_
-#define _VME_H_
-
-#define _VI_FUNC
-#include "wienvme_dll.h"
-#endif
Index: petdaqfmf/Makefile
===================================================================
--- petdaqfmf/Makefile (revision 111)
+++ petdaqfmf/Makefile (nonexistent)
@@ -1,78 +0,0 @@
-
-ROOTINC=$(shell root-config --incdir )
-ROOTLIB=$(shell root-config --libs )
-
-
-INC=-I. -I$(ROOTINC)
-
-
-LIBS=$(ROOTLIB) -L./ -lm
-LIBS1=$(shell root-config --libs --glibs )
-
-
-
-SRC = .
-INC1 = -I. -I../lib -I/usr/include
-DBG =
-CFLAGS = $(DBG) $(INC1) -Wall
-
-
-TARGET1 = daq
-
-FILES1 = $(SRC)/daq.C
-
-VMELIB = libf9vme.a
-
-SHLIB = $(VMELIB) -lusb -lz
-
-OBJ_FILES = VMEModule.o CAENV965.o libxxusb.o wienvmeusb_dll.o VmUsbStack.o
-
-all: vme $(TARGET1)
-
-libxxusb.o: libxxusb.cpp libxxusb.h
-
-
-
-.cpp.o:
- $(CXX) -c -g $<
- ar r $(VMELIB) $@
-
-.C.o:
- $(CXX) -c -g $<
- ar r $(VMELIB) $@
-
-
-.cc.o:
- $(CXX) -c -g $<
- ar r $(VMELIB) $@
-
-.c.o:
- $(CXX) -c -g $<
- ar r $(VMELIB) $@
-
-vme: $(OBJ_FILES)
-
-wienvme_dll.o: wienvme_dll.c
-
-
-
-VMEModule.o: VMEModule.hh VMEModule.cc
-
-CAENV965.o: CAENV965.h CAENV965_DEF.h CAENV965.c
-
-
-$(TARGET1): $(FILES1) vme
- $(CXX) -DMAIN $(FILES1) $(CFLAGS) -o $(TARGET1) $(SHLIB) -lstdc++
-
-
-libdaq.so: $(FILES1)
- @echo "Generating dictionary Dict.C..."
- rootcint -f Dict.C -c $(INC) $(CPPFLAGS) daq.h LinkDef.h
- $(CXX) -DG__DICTIONARY $(CPPFLAGS) $(INC) -fPIC -g -Wall $(FILES1) Dict.C -L. $(SHLIB) -shared -o libdaq.so
-
-clean:
- rm Dict.C libdaq.so $(TARGET1)
-
-
-tgz:
- tar czvf vme.tgz Makefile .c .h .C .cc *.hh
Index: praktikum/petdaqfmf/CAENV965.c
===================================================================
--- praktikum/petdaqfmf/CAENV965.c (nonexistent)
+++ praktikum/petdaqfmf/CAENV965.c (revision 112)
@@ -0,0 +1,107 @@
+#include <stdlib.h>
+#include <stdio.h>
+#include "CAENV965.h"
+#include "CAENV965_DEF.h"
+#include "vme.h"
+
+static unsigned long ModuleAddress[10];
+
+int _VI_FUNC V965_map (int ModuleNumber, unsigned long ModuleOffset, int print)
+{
+ int i;
+ unsigned short geo, fw, ah, al;
+ if (print) {
+ printf("CAEN V965_map \n");
+ }
+ ModuleAddress[ModuleNumber] = ModuleOffset;
+ VME_A24D16_R(ModuleAddress[ModuleNumber] + CAENV965_FW, &fw);
+ geo = 0;
+ VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_CRN, &geo);
+ for (i=0;i<32;i++)
+ VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_THM + 2*i, &geo);
+ geo = ModuleNumber+1;
+ VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_GEO, &geo);
+ geo = 0;
+ VME_A24D16_R(ModuleAddress[ModuleNumber] + CAENV965_GEO, &geo);
+ VME_A24D16_R(ModuleAddress[ModuleNumber] + CAENV965_ADH, &ah);
+ VME_A24D16_R(ModuleAddress[ModuleNumber] + CAENV965_ADL, &al);
+ if (print) {
+ printf("CAEN V965 offset = 0x%08x\n", ModuleOffset);
+ printf(" V965_map firmware = %d.%d\n", (fw>>8)&0xff, fw&0xff);
+ printf(" V965_map geo = %d\n", geo&0x1f );
+ printf(" V965_map addr = 0x%04X0000\n", (ah<<8)\|(al&0xff));
+ }
+
+ return 0;
+}
+
+
+int _VI_FUNC V965_init (int ModuleNumber, unsigned short ped)
+{
+ unsigned short dum16;
+
+ dum16= 0x80;
+ VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_BS1, &dum16);
+ VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_BC1, &dum16);
+ dum16= ped;
+ VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_PED, &dum16);
+ dum16= 0x5000;
+ VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_BS2, &dum16);
+ dum16= 0x4;
+ VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_BS2, &dum16);
+ VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_BC2, &dum16);
+ VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_ECR, &dum16);
+
+ printf ( " V965_init Module %d initialized!\n", ModuleNumber ) ;
+ return 0;
+}
+
+int _VI_FUNC V965_clear (int ModuleNumber)
+{
+
+ unsigned short dum16;
+
+ dum16= 0x4;
+ VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_BS2, &dum16);
+ VME_A24D16_W(ModuleAddress[ModuleNumber] + CAENV965_BC2, &dum16);
+ printf("V965_clear\n");
+ return 0;
+
+}
+
+int _VI_FUNC V965_status (int ModuleNumber)
+{
+ unsigned short dum16;
+
+ VME_A24D16_R(ModuleAddress[ModuleNumber] + CAENV965_SR1, &dum16);
+ //printf("*%d\n",dum16);
+ return (int)dum16;
+}
+
+int _VI_FUNC V965_status2 (int ModuleNumber)
+{
+
+ unsigned short dum16;
+
+ VME_A24D16_R(ModuleAddress[ModuleNumber] + CAENV965_SR2, &dum16);
+
+ return (int)dum16;
+}
+
+int _VI_FUNC V965_read (int ModuleNumber, unsigned long whereto[],int len)
+{
+ int status, ndata, i;
+
+ ndata = 0;
+
+ do {
+ if (ndata>=len) {
+ printf("ERROR V965_read: Increase storage size: ndata=%d\n",ndata);
+ break;
+ }
+ VME_A24D32_R(ModuleAddress[ModuleNumber] + CAENV965_OB, &whereto[ndata]);
+ i=(whereto[ndata]>>25)&0x3;
+ if (i<3) ndata++;
+ } while (i<2);
+ return ndata;
+}
Index: praktikum/petdaqfmf/libxxusb.cpp
===================================================================
--- praktikum/petdaqfmf/libxxusb.cpp (nonexistent)
+++ praktikum/petdaqfmf/libxxusb.cpp (revision 112)
@@ -0,0 +1,1659 @@
+
+// libxxusb.cpp : Defines the entry point for the DLL application.
+//
+
+
+
+#include <string.h>
+#include <malloc.h>
+#include "usb.h"
+#include "libxxusb.h"
+#include <time.h>
+#include "stdio.h"
+
+
+
+// 03/09/06 Release 3.00 changes
+// 07/28/06 correction CAMAC write for F to be in range 16...23
+// 10/09/06 correction CAMAC read for F to be in range <16 OR >23
+// 10/16/06 CAMAC DGG corrected
+// 12/28/07 Open corrected for bug when calling register after opening
+/*
+****** xxusb_longstack_execute **********************
+
+ Executes stack array passed to the function and returns the data read from the VME bus
+
+ Paramters:
+ hdev: USB device handle returned from an open function
+ DataBuffer: pointer to the dual use buffer
+ when calling , DataBuffer contains (unsigned short) stack data, with first word serving
+ as a placeholder
+ upon successful return, DataBuffer contains (unsigned short) VME data
+ lDataLen: The number of bytes to be fetched from VME bus - not less than the actual number
+ expected, or the function will return -5 code. For stack consisting only of write operations,
+ lDataLen may be set to 1.
+ timeout: The time in ms that should be spent tryimg to write data.
+
+ Returns:
+ When Successful, the number of bytes read from xxusb.
+ Upon failure, a negative number
+
+ Note:
+ The function must pass a pointer to an array of unsigned integer stack data, in which the first word
+ is left empty to serve as a placeholder.
+ The function is intended for executing Uint32_t stacks, up to 4 MBytes Uint32_t, both "write" and "read"
+ oriented, such as using multi-block transfer operations.
+ Structure upon call:
+ DataBuffer(0) = 0(don't care place holder)
+ DataBuffer(1) = (unsigned short)StackLength bits 0-15
+ DataBuffer(2) = (unsigned short)StackLength bits 16-20
+ DataBuffer(3 - StackLength +2) (unsigned short) stack data
+ StackLength represents the number of words following DataBuffer(1) word, thus the total number
+ of words is StackLength+2
+ Structure upon return:
+ DataBuffer(0 - (ReturnValue/2-1)) - (unsigned short)array of returned data when ReturnValue>0
+*/
+
+int xxusb_longstack_execute(usb_dev_handle hDev, void DataBuffer, int lDataLen, int timeout)
+{
+ int ret;
+ char *cbuf;
+ unsigned short *usbuf;
+ int bufsize;
+
+ cbuf = (char *)DataBuffer;
+ usbuf = (unsigned short *)DataBuffer;
+ cbuf[0]=12;
+ cbuf[1]=0;
+ bufsize = 2(usbuf[1]+0x10000usbuf[2])+4;
+ ret=usb_bulk_write(hDev, XXUSB_ENDPOINT_OUT, cbuf, bufsize, timeout);
+ if (ret>0)
+ ret=usb_bulk_read(hDev, XXUSB_ENDPOINT_IN, cbuf, lDataLen, timeout);
+
+ return ret;
+}
+
+/*
+****** xxusb_bulk_read **********************
+
+ Reads the content of the usbfifo whenever "FIFO full" flag is set,
+ otherwise times out.
+
+ Paramters:
+ hdev: USB device handle returned from an open function
+ DataBuffer: pointer to an array to store data that is read from the VME bus;
+ the array may be declared as byte, unsigned short, or unsigned Uint32_t
+ lDatalen: The number of bytes to read from xxusb
+ timeout: The time in ms that should be spent waiting for data.
+
+ Returns:
+ When Successful, the number of bytes read from xxusb.
+ Upon failure, a negative number
+
+ Note:
+ Depending upon the actual need, the function may be used to return the data in a form
+ of an array of bytes, unsigned short integers (16 bits), or unsigned Uint32_t integers (32 bits).
+ The latter option of passing a pointer to an array of unsigned Uint32_t integers is meaningful when
+ xxusb data buffering option is used (bit 7=128 of the global register) that requires data
+ 32-bit data alignment.
+
+*/
+int xxusb_bulk_read(usb_dev_handle hDev, void DataBuffer, int lDataLen, int timeout)
+{
+int ret;
+char *cbuf;
+cbuf = (char *)DataBuffer;
+ ret = usb_bulk_read(hDev, XXUSB_ENDPOINT_IN, cbuf, lDataLen, timeout);
+ return ret;
+}
+
+/*
+****** xxusb_bulk_write **********************
+
+ Writes the content of an array of bytes, unsigned short integers, or unsigned Uint32_t integers
+ to the USB port fifo; times out when the USB fifo is full (e.g., when xxusb is busy).
+
+ Paramters:
+ hdev: USB device handle returned from an open function
+ DataBuffer: pointer to an array storing the data to be sent;
+ the array may be declared as byte, unsigned short, or unsigned Uint32_t
+ lDatalen: The number of bytes to to send to xxusb
+ timeout: The time in ms that should be spent waiting for data.
+
+ Returns:
+ When Successful, the number of bytes passed to xxusb.
+ Upon failure, a negative number
+
+ Note:
+ Depending upon the actual need, the function may be used to pass to xxusb the data in a form
+ of an array of bytes, unsigned short integers (16 bits), or unsigned Uint32_t integers (32 bits).
+*/
+int xxusb_bulk_write(usb_dev_handle hDev, void DataBuffer, int lDataLen, int timeout)
+{
+int ret;
+char *cbuf;
+cbuf = (char *)DataBuffer;
+ ret = usb_bulk_write(hDev, XXUSB_ENDPOINT_OUT, cbuf, lDataLen, timeout);
+ return ret;
+}
+
+/*
+****** xxusb_usbfifo_read **********************
+
+ Reads data stored in the xxusb fifo and packs them in an array of Uint32_t integers.
+
+ Paramters:
+ hdev: USB device handle returned from an open function
+ DataBuffer: pointer to an array of Uint32_t to store data that is read
+ the data occupy only the least significant 16 bits of the 32-bit data words
+ lDatalen: The number of bytes to read from the xxusb
+ timeout: The time in ms that should be spent waiting for data.
+
+ Returns:
+ When Successful, the number of bytes read from xxusb.
+ Upon failure, a negative number
+
+ Note:
+ The function is not economical as it wastes half of the space required for storing
+ the data received. Also, it is relatively slow, as it performs extensive data repacking.
+ It is recommended to use xxusb_bulk_read with a pointer to an array of unsigned short
+ integers.
+*/
+int xxusb_usbfifo_read(usb_dev_handle hDev, int DataBuffer, int lDataLen, int timeout)
+{
+int ret;
+char *cbuf;
+unsigned short *usbuf;
+int i;
+
+cbuf = (char *)DataBuffer;
+usbuf = (unsigned short *)DataBuffer;
+
+ ret = usb_bulk_read(hDev, XXUSB_ENDPOINT_IN, cbuf, lDataLen, timeout);
+ if (ret > 0)
+ for (i=ret/2-1; i >= 0; i=i-1)
+ {
+ usbuf[i*2]=usbuf[i];
+ usbuf[i*2+1]=0;
+ }
+ return ret;
+}
+
+
+//******************************************************//
+//***************** GENERAL XX_USB *****************//
+//******************************************************//
+// The following are functions used for both VM_USB & CC_USB
+
+
+/*
+****** xxusb_register_write **********************
+
+ Writes Data to the xxusb register selected by RedAddr. For
+ acceptable values for RegData and RegAddr see the manual
+ the module you are using.
+
+ Parameters:
+ hdev: usb device handle returned from open device
+ RegAddr: The internal address if the xxusb
+ RegData: The Data to be written to the register
+
+ Returns:
+ Number of bytes sent to xxusb if successful
+ 0 if the register is write only
+ Negative numbers if the call fails
+*/
+short xxusb_register_write(usb_dev_handle *hDev, short RegAddr, Uint32_t RegData)
+{
+ Uint32_t RegD;
+ char buf[8]={5,0,0,0,0,0,0,0};
+ int ret;
+ int lDataLen;
+ int timeout;
+ if ((RegAddr==0) \|\| (RegAddr==12) \|\| (RegAddr==15))
+ return 0;
+ buf[2]=(char)(RegAddr & 15);
+ buf[4]=(char)(RegData & 255);
+
+ RegD = RegData >> 8;
+ buf[5]=(char)(RegD & 255);
+ RegD = RegD >>8;
+ if (RegAddr==8)
+ {
+ buf[6]=(char)(RegD & 255);
+ lDataLen=8;
+ }
+ else
+ lDataLen=6;
+ timeout=10;
+ ret=xxusb_bulk_write(hDev, buf, lDataLen, timeout);
+ return ret;
+}
+
+/*
+****** xxusb_stack_write **********************
+
+ Writes a stack of VME/CAMAC calls to the VM_USB/CC_USB
+ to be executed upon trigger.
+
+ Parameters:
+ hdev: usb device handle returned from an open function
+ StackAddr: internal register to which the stack should be written
+ lpStackData: Pointer to an array holding the stack
+
+ Returns:
+ The number of Bytes written to the xxusb when successful
+ A negative number upon failure
+*/
+short xxusb_stack_write(usb_dev_handle hDev, short StackAddr, Uint32_t intbuf)
+{
+ int timeout;
+ short ret;
+ short lDataLen;
+ char buf[2000];
+ short i;
+ int bufsize;
+
+ buf[0]=(char)((StackAddr & 51) + 4);
+ buf[1]=0;
+ lDataLen=(short)(intbuf[0] & 0xFFF);
+ buf[2]=(char)(lDataLen & 255);
+ lDataLen = lDataLen >> 8;
+ buf[3] = (char)(lDataLen & 255);
+ bufsize=intbuf[0]*2+4;
+ if (intbuf[0]==0)
+ return 0;
+ for (i=1; i <= intbuf[0]; i++)
+ {
+ buf[2+2*i] = (char)(intbuf[i] & 255);
+ buf[3+2*i] = (char)((intbuf[i] >>8) & 255);
+ }
+ timeout=50;
+ ret=usb_bulk_write(hDev, XXUSB_ENDPOINT_OUT, buf, bufsize, timeout);
+ return ret;
+}
+
+/*
+****** xxusb_stack_execute ********************
+
+ Writes, executes and returns the value of a DAQ stack.
+
+ Parameters:
+ hdev: USB device handle returned from an open function
+ intbuf: Pointer to an array holding the values stack. Upon return
+ Pointer value is the Data returned from the stack.
+
+ Returns:
+ When successful, the number of Bytes read from xxusb
+ Upon Failure, a negative number.
+*/
+short xxusb_stack_execute(usb_dev_handle hDev, Uint32_t intbuf)
+{
+ int timeout;
+ short ret;
+ short lDataLen;
+ char buf[26700];
+ short i;
+ int bufsize;
+ int ii = 0;
+
+ buf[0]=12;
+ buf[1]=0;
+ lDataLen=(short)(intbuf[0] & 0xFFF);
+ buf[2]=(char)(lDataLen & 255);
+ lDataLen = lDataLen >> 8;
+ buf[3] = (char)(lDataLen & 15);
+ bufsize=intbuf[0]*2+4;
+ if (intbuf[0]==0)
+ return 0;
+ for (i=1; i <= intbuf[0]; i++)
+ {
+ buf[2+2*i] = (char)(intbuf[i] & 255);
+ buf[3+2*i] = (char)((intbuf[i] >>8) & 255);
+ }
+ timeout=2000;
+ ret=usb_bulk_write(hDev, XXUSB_ENDPOINT_OUT, buf, bufsize, timeout);
+ if (ret>0)
+ {
+ lDataLen=26700;
+ timeout=6000;
+ ret=usb_bulk_read(hDev, XXUSB_ENDPOINT_IN, buf, lDataLen, timeout);
+ if (ret>0)
+ for (i=0; i < ret; i=i+2)
+ intbuf[ii++]=(UCHAR)(buf[i]) +(UCHAR)( buf[i+1])*256;
+ }
+ return ret;
+}
+
+/*
+****** xxusb_stack_read **********************
+
+ Reads the current DAQ stack stored by xxusb
+
+ Parameters:
+ hdev: USB device handle returned by an open function
+ StackAddr: Indicates which stack to read, primary or secondary
+ intbuf: Pointer to a array where the stack can be stored
+
+ Returns:
+ Number of bytes read from xxusb when successful
+ Upon failure, a negative number
+*/
+short xxusb_stack_read(usb_dev_handle hDev, short StackAddr, Uint32_t intbuf)
+{
+ int timeout;
+ short ret;
+ short lDataLen;
+ short bufsize;
+ char buf[1600];
+ int i;
+
+ buf[0]=(char)(StackAddr & 51);
+ buf[1]=0;
+ lDataLen = 2;
+ timeout=100;
+ ret=usb_bulk_write(hDev, XXUSB_ENDPOINT_OUT, buf, lDataLen, timeout);
+ if (ret < 0)
+ return ret;
+ else
+ bufsize=1600;
+ int ii=0;
+ {
+ ret=usb_bulk_read(hDev, XXUSB_ENDPOINT_IN, buf, bufsize, timeout);
+ if (ret>0)
+ for (i=0; i < ret; i=i+2)
+ intbuf[ii++]=(UCHAR)(buf[i]) + (UCHAR)(buf[i+1])*256;
+ return ret;
+
+ }
+}
+
+/*
+****** xxusb_register_read **********************
+
+ Reads the current contents of an internal xxusb register
+
+ Parameters:
+ hdev: USB device handle returned from an open function
+ RegAddr: The internal address of the register from which to read
+ RegData: Pointer to a Uint32_t to hold the data.
+
+ Returns:
+ When Successful, the number of bytes read from xxusb.
+ Upon failure, a negative number
+*/
+short xxusb_register_read(usb_dev_handle hDev, short RegAddr, Uint32_t RegData)
+{
+//Uint32_t RegD;
+int timeout;
+ char buf[4]={1,0,0,0};
+ int ret;
+ int lDataLen;
+
+ buf[2]=(char)(RegAddr & 15);
+ timeout=10;
+ lDataLen=4;
+ ret=xxusb_bulk_write(hDev, buf, lDataLen, timeout);
+ if (ret < 0)
+ return (short)ret;
+ else
+ {
+ lDataLen=8;
+ timeout=100;
+ ret=xxusb_bulk_read(hDev, buf, lDataLen, timeout);
+ if (ret<0)
+ return (short)ret;
+ else
+ {
+ RegData=(UCHAR)(buf[0])+256(UCHAR)(buf[1]);
+ if (ret==4)
+ RegData=RegData+0x10000*(UCHAR)(buf[2]);
+ return (short)ret;
+ }
+ }
+}
+
+/*
+****** xxusb_reset_toggle **********************
+
+ Toggles the reset state of the FPGA while the xxusb in programming mode
+
+ Parameters
+ hdev: US B device handle returned from an open function
+
+ Returns:
+ Upon failure, a negative number
+*/
+short xxusb_reset_toggle(usb_dev_handle *hDev)
+{
+ short ret;
+ char buf[2] = {(char)255,(char)255};
+ int lDataLen=2;
+ int timeout=1000;
+ ret = usb_bulk_write(hDev, XXUSB_ENDPOINT_OUT, buf,lDataLen, timeout);
+ return (short)ret;
+}
+
+/*
+****** xxusb_devices_find **********************
+
+ Determines the number and parameters of all xxusb devices attched to
+ the computer.
+
+ Parameters:
+ xxdev: pointer to an array on which the device parameters are stored
+
+ Returns:
+ Upon success, returns the number of devices found
+ Upon Failure returns a negative number
+*/
+short xxusb_devices_find(xxusb_device_type *xxdev)
+{
+ short DevFound = 0;
+ usb_dev_handle *udev;
+ struct usb_bus *bus;
+ struct usb_device *dev;
+struct usb_bus *usb_busses;
+ char string[256];
+ short ret;
+ usb_init();
+ usb_find_busses();
+ usb_busses=usb_get_busses();
+ usb_find_devices();
+ for (bus=usb_busses; bus; bus = bus->next)
+ {
+ for (dev = bus->devices; dev; dev= dev->next)
+ {
+ if (dev->descriptor.idVendor==XXUSB_WIENER_VENDOR_ID)
+ {
+ udev = usb_open(dev);
+ if (udev)
+ {
+ ret = usb_get_string_simple(udev, dev->descriptor.iSerialNumber, string, sizeof(string));
+ if (ret >0 )
+ {
+ xxdev[DevFound].usbdev=dev;
+ strcpy(xxdev[DevFound].SerialString, string);
+ DevFound++;
+ }
+ usb_close(udev);
+ }
+ else return -1;
+ }
+ }
+ }
+ return DevFound;
+}
+
+/*
+****** xxusb_device_close **********************
+
+ Closes an xxusb device
+
+ Parameters:
+ hdev: USB device handle returned from an open function
+
+ Returns: 1
+*/
+short xxusb_device_close(usb_dev_handle *hDev)
+{
+ short ret;
+ ret=usb_release_interface(hDev,0);
+ usb_close(hDev);
+ return 1;
+}
+
+/*
+****** xxusb_device_open **********************
+
+ Opens an xxusb device found by xxusb_device_find
+
+ Parameters:
+ dev: a usb device
+
+ Returns:
+ A USB device handle
+*/
+usb_dev_handle* xxusb_device_open(struct usb_device *dev)
+{
+ short ret;
+ Uint32_t val;
+ int count =0;
+ usb_dev_handle *udev;
+ udev = usb_open(dev);
+ ret = usb_set_configuration(udev,1);
+ ret = usb_claim_interface(udev,0);
+// RESET USB (added 10/16/06 Andreas Ruben)
+ ret=xxusb_register_write(udev, 10, 0x04);
+// Loop to find known state (added 12/28/07 TH / AR)
+ ret =-1;
+ while ((ret <0) && (count <10))
+ {
+ xxusb_register_read(udev, 0, &val);
+ count++;
+ }
+
+ return udev;
+}
+
+/*
+****** xxusb_flash_program **********************
+
+ --Untested and therefore uncommented--
+*/
+short xxusb_flash_program(usb_dev_handle hDev, char config, short nsect)
+{
+ int i=0;
+ int k=0;
+ short ret=0;
+ time_t t1,t2;
+
+ char *pconfig;
+ char *pbuf;
+ pconfig=config;
+ char buf[518] ={(char)0xAA,(char)0xAA,(char)0x55,(char)0x55,(char)0xA0,(char)0xA0};
+ while (*pconfig++ != -1);
+ for (i=0; i<nsect; i++)
+ {
+ pbuf=buf+6;
+ for (k=0; k<256; k++)
+ {
+ (pbuf++)=(pconfig);
+ (pbuf++)=(pconfig++);
+ }
+ ret = usb_bulk_write(hDev, XXUSB_ENDPOINT_OUT, buf, 518, 2000);
+ if (ret<0)
+ return ret;
+ t1=clock()+(time_t)(0.03*CLOCKS_PER_SEC);
+ while (t1>clock());
+ t2=clock();
+ }
+ return ret;
+}
+
+/*
+****** xxusb_flashblock_program **********************
+
+ --Untested and therefore uncommented--
+*/
+short xxusb_flashblock_program(usb_dev_handle hDev, UCHAR config)
+{
+ int k=0;
+ short ret=0;
+
+ UCHAR *pconfig;
+ char *pbuf;
+ pconfig=config;
+ char buf[518] ={(char)0xAA,(char)0xAA,(char)0x55,(char)0x55,(char)0xA0,(char)0xA0};
+ pbuf=buf+6;
+ for (k=0; k<256; k++)
+ {
+ (pbuf++)=(UCHAR)((pconfig));
+ (pbuf++)=(UCHAR)((pconfig++));
+ }
+ ret = usb_bulk_write(hDev, XXUSB_ENDPOINT_OUT, buf, 518, 2000);
+ return ret;
+}
+
+/*
+****** xxusb_serial_open **********************
+
+ Opens a xxusb device whose serial number is given
+
+ Parameters:
+ SerialString: a char string that gives the serial number of
+ the device you wish to open. It takes the form:
+ VM0009 - for a vm_usb with serial number 9 or
+ CC0009 - for a cc_usb with serial number 9
+
+ Returns:
+ A USB device handle
+*/
+usb_dev_handle* xxusb_serial_open(char *SerialString)
+{
+ short DevFound = 0;
+ usb_dev_handle *udev = NULL;
+ struct usb_bus *bus;
+ struct usb_device *dev;
+struct usb_bus *usb_busses;
+char string[20];
+ short ret;
+ //usb_set_debug(4);
+ usb_init();
+ usb_find_busses();
+ usb_busses=usb_get_busses();
+ usb_find_devices();
+ for (bus=usb_busses; bus; bus = bus->next)
+ {
+ for (dev = bus->devices; dev; dev= dev->next)
+ {
+ if (dev->descriptor.idVendor==XXUSB_WIENER_VENDOR_ID)
+ {
+ printf("id %04x\n",dev->descriptor.idVendor);
+ udev = xxusb_device_open(dev);
+ if (udev)
+ {
+ ret = usb_get_string_simple(udev, dev->descriptor.iSerialNumber, string, sizeof(string));
+ printf("iSerial %04x string %s\n",dev->descriptor.iSerialNumber,string);
+ if (ret >0 )
+ {
+ printf(" Device with %s\n",SerialString);
+
+ if (strcmp(string,SerialString)==0){
+ printf(" Device with %s found\n",SerialString);
+ return udev;
+ }
+ } else {
+ printf(" Device returned %d\n",ret);
+ }
+ usb_close(udev);
+ }
+ }
+ }
+ }
+ udev = NULL;
+ return udev;
+}
+
+
+//******************************************************//
+//**************** EZ_VME Functions ****************//
+//******************************************************//
+// The following are functions used to perform simple
+// VME Functions with the VM_USB
+
+/*
+****** VME_write_32 **********************
+
+ Writes a 32 bit data word to the VME bus
+
+ Parameters:
+ hdev: USB devcie handle returned from an open function
+ Address_Modifier: VME address modifier for the VME call
+ VME_Address: Address to write the data to
+ Data: 32 bit data word to be written to VME_Address
+
+ Returns:
+ Number of bytes read from xxusb when successful
+ Upon failure, a negative number
+*/
+short VME_write_32(usb_dev_handle *hdev, short Address_Modifier, Uint32_t VME_Address, Uint32_t Data)
+{
+ Uint32_t intbuf[1000];
+ short ret;
+ intbuf[0]=7;
+ intbuf[1]=0;
+ intbuf[2]=Address_Modifier;
+ intbuf[3]=0;
+ intbuf[4]=(VME_Address & 0xffff);
+ intbuf[5]=((VME_Address >>16) & 0xffff);
+ intbuf[6]=(Data & 0xffff);
+ intbuf[7]=((Data >> 16) & 0xffff);
+ ret = xxusb_stack_execute(hdev, intbuf);
+ return ret;
+}
+
+/*
+****** VME_read_32 **********************
+
+
+ Reads a 32 bit data word from a VME address
+
+ Parameters:
+ hdev: USB devcie handle returned from an open function
+ Address_Modifier: VME address modifier for the VME call
+ VME_Address: Address to read the data from
+ Data: 32 bit data word read from VME_Address
+
+ Returns:
+ Number of bytes read from xxusb when successful
+ Upon failure, a negative number
+*/
+short VME_read_32(usb_dev_handle hdev, short Address_Modifier, Uint32_t VME_Address, Uint32_t Data)
+{
+ Uint32_t intbuf[1000];
+ short ret;
+ intbuf[0]=5;
+ intbuf[1]=0;
+ intbuf[2]=Address_Modifier +0x100;
+ intbuf[3]=0;
+ intbuf[4]=(VME_Address & 0xffff);
+ intbuf[5]=((VME_Address >>16) & 0xffff);
+ ret = xxusb_stack_execute(hdev, intbuf);
+ Data=intbuf[0] + (intbuf[1] 0x10000);
+ return ret;
+}
+
+/*
+****** VME_write_16 **********************
+
+ Writes a 16 bit data word to the VME bus
+
+ Parameters:
+ hdev: USB devcie handle returned from an open function
+ Address_Modifier: VME address modifier for the VME call
+ VME_Address: Address to write the data to
+ Data: word to be written to VME_Address
+
+ Returns:
+ Number of bytes read from xxusb when successful
+ Upon failure, a negative number
+*/
+short VME_write_16(usb_dev_handle *hdev, short Address_Modifier, Uint32_t VME_Address, Uint32_t Data)
+{
+ Uint32_t intbuf[1000];
+ short ret;
+ intbuf[0]=7;
+ intbuf[1]=0;
+ intbuf[2]=Address_Modifier;
+ intbuf[3]=0;
+ intbuf[4]=(VME_Address & 0xffff)+ 0x01;
+ intbuf[5]=((VME_Address >>16) & 0xffff);
+ intbuf[6]=(Data & 0xffff);
+ intbuf[7]=0;
+ ret = xxusb_stack_execute(hdev, intbuf);
+ return ret;
+}
+
+/*
+****** VME_read_16 **********************
+
+ Reads a 16 bit data word from a VME address
+
+ Parameters:
+ hdev: USB devcie handle returned from an open function
+ Address_Modifier: VME address modifier for the VME call
+ VME_Address: Address to read the data from
+ Data: word read from VME_Address
+
+ Returns:
+ Number of bytes read from xxusb when successful
+ Upon failure, a negative number
+*/
+short VME_read_16(usb_dev_handle hdev,short Address_Modifier, Uint32_t VME_Address, Uint32_t Data)
+{
+ Uint32_t intbuf[1000];
+ short ret;
+ intbuf[0]=5;
+ intbuf[1]=0;
+ intbuf[2]=Address_Modifier +0x100;
+ intbuf[3]=0;
+ intbuf[4]=(VME_Address & 0xffff)+ 0x01;
+ intbuf[5]=((VME_Address >>16) & 0xffff);
+ ret = xxusb_stack_execute(hdev, intbuf);
+ *Data=intbuf[0];
+ return ret;
+}
+
+/*
+****** VME_BLT_read_32 **********************
+
+ Performs block transfer of 32 bit words from a VME address
+
+ Parameters:
+ hdev: USB devcie handle returned from an open function
+ Address_Modifier: VME address modifier for the VME call
+ count: number of data words to read
+ VME_Address: Address to read the data from
+ Data: pointer to an array to hold the data words
+
+ Returns:
+ Number of bytes read from xxusb when successful
+ Upon failure, a negative number
+*/
+short VME_BLT_read_32(usb_dev_handle *hdev, short Adress_Modifier, int count, Uint32_t VME_Address, Uint32_t Data[])
+{
+ Uint32_t intbuf[1000];
+ short ret;
+ int i=0;
+ if (count > 255) return -1;
+ intbuf[0]=5;
+ intbuf[1]=0;
+ intbuf[2]=Adress_Modifier +0x100;
+ intbuf[3]=(count << 8);
+ intbuf[4]=(VME_Address & 0xffff);
+ intbuf[5]=((VME_Address >>16) & 0xffff);
+ ret = xxusb_stack_execute(hdev, intbuf);
+ int j=0;
+ for (i=0;i<(2*count);i=i+2)
+ {
+ Data[j]=intbuf[i] + (intbuf[i+1] * 0x10000);
+ j++;
+ }
+ return ret;
+}
+
+//******************************************************//
+//**************** VM_USB Registers ****************//
+//******************************************************//
+// The following are functions used to set the registers
+// in the VM_USB
+
+/*
+****** VME_register_write **********************
+
+ Writes to the vmusb registers that are accessible through
+ VME style calls
+
+ Parameters:
+ hdev: USB devcie handle returned from an open function
+ VME_Address: The VME Address of the internal register
+ Data: Data to be written to VME_Address
+
+ Returns:
+ Number of bytes read from xxusb when successful
+ Upon failure, a negative number
+*/
+short VME_register_write(usb_dev_handle *hdev, Uint32_t VME_Address, Uint32_t Data)
+{
+ Uint32_t intbuf[1000];
+ short ret;
+
+ intbuf[0]=7;
+ intbuf[1]=0;
+ intbuf[2]=0x1000;
+ intbuf[3]=0;
+ intbuf[4]=(VME_Address & 0xffff);
+ intbuf[5]=((VME_Address >>16) & 0xffff);
+ intbuf[6]=(Data & 0xffff);
+ intbuf[7]=((Data >> 16) & 0xffff);
+ ret = xxusb_stack_execute(hdev, intbuf);
+ return ret;
+}
+
+/*
+****** VME_register_read **********************
+
+ Reads from the vmusb registers that are accessible trough VME style calls
+
+ Parameters:
+ hdev: USB devcie handle returned from an open function
+ VME_Address: The VME Address of the internal register
+ Data: Data read from VME_Address
+
+ Returns:
+ Number of bytes read from xxusb when successful
+ Upon failure, a negative number
+*/
+short VME_register_read(usb_dev_handle hdev, Uint32_t VME_Address, Uint32_t Data)
+{
+ Uint32_t intbuf[1000];
+ short ret;
+
+ intbuf[0]=5;
+ intbuf[1]=0;
+ intbuf[2]=0x1100;
+ intbuf[3]=0;
+ intbuf[4]=(VME_Address & 0xffff);
+ intbuf[5]=((VME_Address >>16) & 0xffff);
+ ret = xxusb_stack_execute(hdev, intbuf);
+ Data=intbuf[0] + (intbuf[1] 0x10000);
+ return ret;
+}
+
+/*
+****** VME_LED_settings **********************
+
+ Sets the vmusb LED's
+
+ Parameters:
+ hdev: USB devcie handle returned from an open function
+ LED: The number which corresponds to an LED values are:
+ 0 - for Top YELLOW LED
+ 1 - for RED LED
+ 2 - for GREEN LED
+ 3 - for Bottom YELLOW LED
+ code: The LED aource selector code, valid values for each LED
+ are listed in the manual
+ invert: to invert the LED lighting
+ latch: sets LED latch bit
+
+ Returns:
+ Number of bytes read from xxusb when successful
+ Upon failure, a negative number
+*/
+short VME_LED_settings(usb_dev_handle *hdev, int LED, int code, int invert, int latch)
+{
+ short ret;
+// Uint32_t internal;
+ Uint32_t Data;
+
+ if( (LED <0) \|\|(LED > 3) \|\| (code < 0) \|\| (code > 7)) return -1;
+
+ VME_register_read(hdev,0xc,&Data);
+ if(LED == 0)
+ {
+ Data = Data & 0xFFFFFF00;
+ Data = Data \| code;
+ if (invert == 1 && latch == 1) Data = Data \| 0x18;
+ if (invert == 1 && latch == 0) Data = Data \| 0x08;
+ if (invert == 0 && latch == 1) Data = Data \| 0x10;
+ }
+ if(LED == 1)
+ {
+ Data = Data & 0xFFFF00FF;
+ Data = Data \| (code * 0x0100);
+ if (invert == 1 && latch == 1) Data = Data \| 0x1800;
+ if (invert == 1 && latch == 0) Data = Data \| 0x0800;
+ if (invert == 0 && latch == 1) Data = Data \| 0x1000;
+ }
+ if(LED == 2)
+ {
+ Data = Data & 0xFF00FFFF;
+ Data = Data \| (code * 0x10000);
+ if (invert == 1 && latch == 1) Data = Data \| 0x180000;
+ if (invert == 1 && latch == 0) Data = Data \| 0x080000;
+ if (invert == 0 && latch == 1) Data = Data \| 0x100000;
+ }
+ if(LED == 3)
+ {
+ Data = Data & 0x00FFFFFF;
+ Data = Data \| (code * 0x10000);
+ if (invert == 1 && latch == 1) Data = Data \| 0x18000000;
+ if (invert == 1 && latch == 0) Data = Data \| 0x08000000;
+ if (invert == 0 && latch == 1) Data = Data \| 0x10000000;
+ }
+ ret = VME_register_write(hdev, 0xc, Data);
+ return ret;
+}
+
+/*
+****** VME_DGG **********************
+
+ Sets the parameters for Gate & Delay channel A of vmusb
+
+ Parameters:
+ hdev: USB devcie handle returned from an open function
+ channel: Which DGG channel to use Valid Values are:
+ 0 - For DGG A
+ 1 - For DGG B
+ trigger: Determines what triggers the start of the DGG Valid values are:
+ 0 - Channel disabled
+ 1 - NIM input 1
+ 2 - NIM input 2
+ 3 - Event Trigger
+ 4 - End of Event
+ 5 - USB Trigger
+ 6 - Pulser
+ output: Determines which NIM output to use for the channel, Vaild values are:
+ 0 - for NIM O1
+ 1 - for NIM O2
+ delay: 32 bit word consisting of
+ lower 16 bits: Delay_fine in steps of 12.5ns between trigger and start of gate
+ upper 16 bits: Delay_coarse in steps of 81.7us between trigger and start of gate
+ gate: the time the gate should stay open in steps of 12.5ns
+ invert: is 1 if you wish to invert the DGG channel output
+ latch: is 1 if you wish to run the DGG channel latched
+
+ Returns:
+ Returns 1 when successful
+ Upon failure, a negative number
+*/
+short VME_DGG(usb_dev_handle *hdev, unsigned short channel, unsigned short trigger, unsigned short output,
+ Uint32_t delay, unsigned short gate, unsigned short invert, unsigned short latch)
+{
+ Uint32_t Data, DGData, Delay_ext;
+ Uint32_t internal;
+ short ret;
+
+
+ ret = VME_register_read(hdev, 0x10, &Data);
+ // check and correct values
+ if(ret<=0) return -1;
+
+ if(channel >1) channel =1;
+ if(invert >1) invert =1;
+ if(latch >1) latch =1;
+ if(output >1) output =1;
+ if(trigger >6) trigger =0;
+
+ // define Delay and Gate data
+ DGData = gate * 0x10000;
+ DGData += (unsigned short) delay;
+
+ // Set channel, output, invert, latch
+ if (output == 0)
+ {
+ Data = Data & 0xFFFFFF00;
+ Data += 0x04 + channel +0x08invert + 0x10latch;
+ }
+ if (output == 1)
+ {
+ Data = Data & 0xFFFF00FF;
+ Data += (0x04 + channel +0x08invert + 0x10latch)*0x100;
+ }
+
+ // Set trigger, delay, gate
+
+ if(channel ==0) // CHANNEL DGG_A
+ {
+ internal = (trigger * 0x1000000) ;
+ Data= Data & 0xF0FFFFFF;
+ Data += internal;
+ ret = VME_register_write(hdev,0x10,Data);
+ if(ret<=0) return -1;
+ ret=VME_register_write(hdev,0x14,DGData);
+ if(ret<=0) return -1;
+ // Set coarse delay in DGG_Extended register
+ ret = VME_register_read(hdev,0x38,&Data);
+ Delay_ext= (Data & 0xffff0000);
+ Delay_ext+= ((delay/0x10000) & 0xffff);
+ ret = VME_register_write(hdev,0x38,Delay_ext);
+ }
+ if( channel ==1) // CHANNEL DGG_B
+ {
+ internal = (trigger * 0x10000000) ;
+ Data= Data & 0x0FFFFFFF;
+ Data += internal;
+ ret = VME_register_write(hdev,0x10,Data);
+ if(ret<=0) return -1;
+ ret=VME_register_write(hdev,0x18,DGData);
+ if(ret<=0) return -1;
+ // Set coarse delay in DGG_Extended register
+ ret = VME_register_read(hdev,0x38,&Data);
+ Delay_ext= (Data & 0x0000ffff);
+ Delay_ext+= (delay & 0xffff0000);
+ ret = VME_register_write(hdev,0x38,Delay_ext);
+ }
+ return 1;
+
+}
+
+/*
+****** VME_Output_settings **********************
+
+ Sets the vmusb NIM output register
+
+ Parameters:
+ hdev: USB devcie handle returned from an open function
+ Channel: The number which corresponds to an output:
+ 1 - for Output 1
+ 2 - for Output 2
+ code: The Output selector code, valid values
+ are listed in the manual
+ invert: to invert the output
+ latch: sets latch bit
+
+ Returns:
+ Number of bytes read from xxusb when successful
+ Upon failure, a negative number
+*/
+short VME_Output_settings(usb_dev_handle *hdev, int Channel, int code, int invert, int latch)
+{
+
+ short ret;
+// Uint32_t internal;
+ Uint32_t Data;
+
+ if( (Channel <1) \|\|(Channel > 2) \|\| (code < 0) \|\| (code > 7)) return -1;
+ VME_register_read(hdev,0x10,&Data);
+ if(Channel == 1)
+ {
+ Data = Data & 0xFFFF00;
+ Data = Data \| code;
+ if (invert == 1 && latch == 1) Data = Data \| 0x18;
+ if (invert == 1 && latch == 0) Data = Data \| 0x08;
+ if (invert == 0 && latch == 1) Data = Data \| 0x10;
+ }
+ if(Channel == 2)
+ {
+ Data = Data & 0xFF00FF;
+ Data = Data \| (code * 0x0100);
+ if (invert == 1 && latch == 1) Data = Data \| 0x1800;
+ if (invert == 1 && latch == 0) Data = Data \| 0x0800;
+ if (invert == 0 && latch == 1) Data = Data \| 0x1000;
+ }
+ ret = VME_register_write(hdev, 0x10, Data);
+ return ret;
+}
+
+
+//******************************************************//
+//**************** CC_USB Registers ****************//
+//******************************************************//
+// The following are functions used to set the registers
+// in the CAMAC_USB
+
+/*
+****** CAMAC_register_write ***************
+
+ Performs a CAMAC write to CC_USB register
+
+ Parameters:
+ hdev: USB device handle returned from an open function
+ A: CAMAC Subaddress
+ F: CAMAC Function
+ Data: data to be written
+
+ Returns:
+ Number of bytes written to xxusb when successful
+ Upon failure, a negative number
+*/
+short CAMAC_register_write(usb_dev_handle *hdev, int A, Uint32_t Data)
+{
+ int F = 16;
+ int N = 25;
+ Uint32_t intbuf[4];
+ int ret;
+
+ intbuf[0]=1;
+ intbuf[1]=(Uint32_t)(F+A32+N512 + 0x4000);
+ intbuf[0]=3;
+ intbuf[2]=(Data & 0xffff);
+ intbuf[3]=((Data >>16) & 0xffff);
+ ret = xxusb_stack_execute(hdev, intbuf);
+
+ return ret;
+}
+
+/*
+****** CAMAC_register_read **********************
+
+ Performs a CAMAC read from CC_USB register
+
+ Parameters:
+ hdev: USB device handle returned from an open function
+ N: CAMAC Station Number
+ A: CAMAC Subaddress
+ F: CAMAC Function
+ Q: The Q response from the CAMAC dataway
+ X: The comment accepted response from CAMAC dataway
+
+ Returns:
+ Number of bytes read from xxusb when successful
+ Upon failure, a negative number
+*/
+short CAMAC_register_read(usb_dev_handle hdev, int A, Uint32_t Data)
+{
+ int F = 0;
+ int N = 25;
+ Uint32_t intbuf[4];
+ int ret;
+
+ intbuf[0]=1;
+ intbuf[1]=(Uint32_t)(F+A32+N512 + 0x4000);
+ ret = xxusb_stack_execute(hdev, intbuf);
+ Data=intbuf[0] + (intbuf[1] 0x10000);
+
+ return ret;
+}
+
+/*
+****** CAMAC_DGG **********************
+
+ Sets the parameters for Gate & Delay channel A of CC_USB
+
+ Parameters:
+ hdev: USB devcie handle returned from an open function
+ channel: Which DGG channel to use Valid Values are:
+ 0 - For DGG A
+ 1 - For DGG B
+ trigger: Determines what triggers the start of the DGG Valid values are:
+ 0 - Channel disabled
+ 1 - NIM input 1
+ 2 - NIM input 2
+ 3 - NIM input 2
+ 4 - Event Trigger
+ 5 - End of Event
+ 6 - USB Trigger
+ 7 - Pulser
+ output: Determines which NIM output to use for the channel, Vaild values are:
+ 1 - for NIM O1
+ 2 - for NIM O2
+ 3 - for NIM O3
+ delay: Delay in steps of 12.5ns between trigger and start of gate
+ gate: the time the gate should stay open in steps of 12.5ns
+ invert: is 1 if you wish to invert the DGG channel output
+ latch: is 1 if you wish to run the DGG channel latched
+
+ Returns:
+ Returns 1 when successful
+ Upon failure, a negative number
+*/
+short CAMAC_DGG(usb_dev_handle *hdev, short channel, short trigger, short output,
+ int delay, int gate, short invert, short latch)
+
+
+
+{
+// short channel_ID;
+ Uint32_t Data;
+ Uint32_t internal;
+ short ret;
+ Uint32_t Delay_ext;
+
+ ret = CAMAC_register_read(hdev,5,&Data);
+ //Set trigger
+ if((output < 1 ) \|\| (output >3) \|\| (channel < 0 ) \|\| (channel > 1))
+ return -1;
+ if(output ==1)
+ {
+ if(channel ==0)
+ {
+ internal = 0x03;
+ } else {
+ internal = 0x04;
+ }
+ }
+ if(output ==2)
+ {
+ if(channel ==0)
+ {
+ internal = 0x04;
+ } else {
+ internal = 0x05;
+ }
+ }
+ if(output ==3)
+ {
+ if(channel ==0)
+ {
+ internal = 0x05;
+ } else {
+ internal = 0x06;
+ }
+ }
+
+
+// Set invert bit
+ if(invert ==1)
+ internal = internal \| 0x10;
+ else
+ internal = internal & 0x0F;
+ // Set Latch Bit
+ if(latch==1)
+ internal = internal \| 0x20;
+ else
+ internal = internal & 0x1F;
+// Add new data to old
+ if(output == 1)
+ {
+ Data = Data & 0xFFFF00;
+ Data = Data \| internal;
+ }
+ if(output == 2)
+ {
+ Data = Data & 0xFF00FF;
+ Data = Data \|(internal * 0x100);
+ }
+ if(output == 3)
+ {
+ Data = Data & 0x00FFFF;
+ Data = Data \| (internal * 0x10000) ;
+ }
+ CAMAC_register_write(hdev, 5, Data);
+ ret = CAMAC_register_read(hdev,6,&Data);
+//Set Trigger
+ if(trigger <0 \|\| trigger > 7)
+ return -1;
+ if(channel ==0)
+ {
+ Data = Data & 0xFF00FFFF;
+ internal = trigger * 0x10000;
+ Data = Data \| internal;
+ } else {
+ Data = Data & 0x00FFFFFF;
+ internal = trigger * 0x1000000;
+ Data = Data \| internal;
+ }
+ ret = CAMAC_register_write(hdev, 6, Data);
+ if(channel == 0)
+ {
+// Write Delay and Gate info
+ ret = CAMAC_register_read(hdev,13,&Data);
+ Delay_ext= (Data & 0xffff0000);
+ Delay_ext+= ((delay/0x10000) & 0xffff);
+ internal = gate * 0x10000;
+ Data = internal + (delay & 0xffff);
+ ret=CAMAC_register_write(hdev,7,Data);
+// Set coarse delay in DGG_Extended register
+ ret=CAMAC_register_write(hdev,13,Delay_ext);
+ }
+ else
+ {
+ ret=CAMAC_register_write(hdev,8,Data);
+ ret = CAMAC_register_read(hdev,13,&Data);
+ Delay_ext= (Data & 0x0000ffff);
+ Delay_ext+= (delay & 0xffff0000);
+ internal = gate * 0x10000;
+ Data = internal + (delay & 0xffff);
+// Set coarse delay in DGG_Extended register
+ ret=CAMAC_register_write(hdev,13,Delay_ext);
+ }
+ return 1;
+}
+
+/*
+****** CAMAC_LED_settings **********************
+
+ Writes a data word to the vmusb LED register
+
+ Parameters:
+ hdev: USB devcie handle returned from an open function
+ LED: The number which corresponds to an LED values are:
+ 1 - for RED LED
+ 2 - for GREEN LED
+ 3 - for Yellow LED
+ code: The LED aource selector code, valid values for each LED
+ are listed in the manual
+ invert: to invert the LED lighting
+ latch: sets LED latch bit
+
+ Returns:
+ Number of bytes read from xxusb when successful
+ Upon failure, a negative number
+*/
+short CAMAC_LED_settings(usb_dev_handle *hdev, int LED, int code, int invert, int latch)
+{
+
+ short ret;
+// Uint32_t internal;
+ Uint32_t Data;
+
+ if( (LED <1) \|\|(LED > 3) \|\| (code < 0) \|\| (code > 7))
+ return -1;
+
+ CAMAC_register_read(hdev,4,&Data);
+
+ if(LED == 1)
+ {
+ Data = Data & 0xFFFF00;
+ Data = Data \| code;
+ if (invert == 1 && latch == 1)
+ Data = Data \| 0x30;
+ if (invert == 1 && latch == 0)
+ Data = Data \| 0x10;
+ if (invert == 0 && latch == 1)
+ Data = Data \| 0x20;
+ }
+ if(LED == 2)
+ {
+ Data = Data & 0xFF00FF;
+ Data = Data \| (code * 0x0100);
+ if (invert == 1 && latch == 1)
+ Data = Data \| 0x3000;
+ if (invert == 1 && latch == 0)
+ Data = Data \| 0x1000;
+ if (invert == 0 && latch == 1)
+ Data = Data \| 0x2000;
+ }
+ if(LED == 3)
+ {
+ Data = Data & 0x00FFFF;
+ Data = Data \| (code * 0x10000);
+ if (invert == 1 && latch == 1)
+ Data = Data \| 0x300000;
+ if (invert == 1 && latch == 0)
+ Data = Data \| 0x100000;
+ if (invert == 0 && latch == 1)
+ Data = Data \| 0x200000;
+ }
+ ret = CAMAC_register_write(hdev, 4, Data);
+ return ret;
+}
+
+/*
+****** CAMAC_Output_settings **********************
+
+ Writes a data word to the vmusb LED register
+
+ Parameters:
+ hdev: USB devcie handle returned from an open function
+ Channel: The number which corresponds to an output:
+ 1 - for Output 1
+ 2 - for Output 2
+ 3 - for Output 3
+ code: The Output selector code, valid values
+ are listed in the manual
+ invert: to invert the output
+ latch: sets latch bit
+
+ Returns:
+ Number of bytes read from xxusb when successful
+ Upon failure, a negative number
+*/
+short CAMAC_Output_settings(usb_dev_handle *hdev, int Channel, int code, int invert, int latch)
+{
+ short ret;
+// Uint32_t internal;
+ Uint32_t Data;
+
+ if( (Channel <1) \|\|(Channel > 3) \|\| (code < 0) \|\| (code > 7))
+ return -1;
+
+ CAMAC_register_read(hdev,5,&Data);
+
+ if(Channel == 1)
+ {
+ Data = Data & 0xFFFF00;
+ Data = Data \| code;
+ if (invert == 1 && latch == 1)
+ Data = Data \| 0x30;
+ if (invert == 1 && latch == 0)
+ Data = Data \| 0x10;
+ if (invert == 0 && latch == 1)
+ Data = Data \| 0x20;
+ }
+ if(Channel == 2)
+ {
+ Data = Data & 0xFF00FF;
+ Data = Data \| (code * 0x0100);
+ if (invert == 1 && latch == 1)
+ Data = Data \| 0x3000;
+ if (invert == 1 && latch == 0)
+ Data = Data \| 0x1000;
+ if (invert == 0 && latch == 1)
+ Data = Data \| 0x2000;
+ }
+ if(Channel == 3)
+ {
+ Data = Data & 0x00FFFF;
+ Data = Data \| (code * 0x10000);
+ if (invert == 1 && latch == 1)
+ Data = Data \| 0x300000;
+ if (invert == 1 && latch == 0)
+ Data = Data \| 0x100000;
+ if (invert == 0 && latch == 1)
+ Data = Data \| 0x200000;
+ }
+ ret = CAMAC_register_write(hdev, 5, Data);
+ return ret;
+}
+
+/*
+****** CAMAC_write_LAM_mask **********************
+
+ Writes the data word to the LAM mask register
+
+ Parameters:
+ hdev: USB devcie handle returned from an open function
+ Data: LAM mask to write
+
+ Returns:
+ Number of bytes read from xxusb when successful
+ Upon failure, a negative number
+*/
+short CAMAC_write_LAM_mask(usb_dev_handle *hdev, Uint32_t Data)
+{
+ short ret;
+ ret = CAMAC_register_write(hdev, 9, Data);
+
+ return ret;
+}
+
+/*
+****** CAMAC_read_LAM_mask **********************
+
+ Writes the data word to the LAM mask register
+
+ Parameters:
+ hdev: USB devcie handle returned from an open function
+ Data: LAM mask to write
+
+ Returns:
+ Number of bytes read from xxusb when successful
+ Upon failure, a negative number
+*/
+short CAMAC_read_LAM_mask(usb_dev_handle hdev, Uint32_t Data)
+{
+ Uint32_t intbuf[4];
+ int ret;
+ int N = 25;
+ int F = 0;
+ int A = 9;
+
+ // CAMAC direct read function
+ intbuf[0]=1;
+ intbuf[1]=(Uint32_t)(F+A32+N512 + 0x4000);
+ ret = xxusb_stack_execute(hdev, intbuf);
+ Data=intbuf[0] + (intbuf[1] & 255) 0x10000;
+ return ret;
+}
+
+
+//******************************************************//
+//************** EZ_CAMAC Functions ****************//
+//******************************************************//
+// The following are functions used to perform simple
+// CAMAC Functions with the CC_USB
+
+
+/*
+****** CAMAC_write **********************
+
+ Performs a CAMAC write using NAF comments
+
+ Parameters:
+ hdev: USB device handle returned from an open function
+ N: CAMAC Station Number
+ A: CAMAC Subaddress
+ F: CAMAC Function (16...23)
+ Q: The Q response from the CAMAC dataway
+ X: The comment accepted response from CAMAC dataway
+
+ Returns:
+ Number of bytes written to xxusb when successful
+ Upon failure, a negative number
+*/
+short CAMAC_write(usb_dev_handle hdev, int N, int A, int F, Uint32_t Data, int Q, int *X)
+{
+ Uint32_t intbuf[4];
+ int ret;
+// CAMAC direct write function
+ intbuf[0]=1;
+ intbuf[1]=(Uint32_t)(F+A32+N512 + 0x4000);
+ if ((F > 15) && (F < 24))
+ {
+ intbuf[0]=3;
+ intbuf[2]=(Data & 0xffff);
+ intbuf[3]=((Data >>16) & 255);
+ ret = xxusb_stack_execute(hdev, intbuf);
+ *Q = (intbuf[0] & 1);
+ *X = ((intbuf[0] >> 1) & 1);
+ }
+ return ret;
+}
+
+/*
+****** CAMAC_read **********************
+
+ Performs a CAMAC read using NAF comments
+
+ Parameters:
+ hdev: USB device handle returned from an open function
+ N: CAMAC Station Number
+ A: CAMAC Subaddress
+ F: CAMAC Function (F<16 or F>23)
+ Q: The Q response from the CAMAC dataway
+ X: The comment accepted response from CAMAC dataway
+
+ Returns:
+ Number of bytes read from xxusb when successful
+ Upon failure, a negative number
+*/
+short CAMAC_read(usb_dev_handle hdev, int N, int A, int F, Uint32_t Data, int Q, int X)
+{
+ Uint32_t intbuf[4];
+ int ret;
+ // CAMAC direct read function
+ intbuf[0]=1;
+ intbuf[1]=(Uint32_t)(F+A32+N512 + 0x4000);
+ ret = xxusb_stack_execute(hdev, intbuf);
+ if ((F < 16) \|\| (F >23))
+ {
+ Data=intbuf[0] + (intbuf[1] & 255) 0x10000; //24-bit word
+ *Q = ((intbuf[1] >> 8) & 1);
+ *X = ((intbuf[1] >> 9) & 1);
+ }
+ return ret;
+}
+
+/*
+****** CAMAC_Z **********************
+
+ Performs a CAMAC init
+
+ Parameters:
+ hdev: USB device handle returned from an open function
+
+ Returns:
+ Number of bytes written to xxusb when successful
+ Upon failure, a negative number
+*/
+short CAMAC_Z(usb_dev_handle *hdev)
+{
+ Uint32_t intbuf[4];
+ int ret;
+// CAMAC Z = N(28) A(8) F(29)
+ intbuf[0]=1;
+ intbuf[1]=(Uint32_t)(29+832+28512 + 0x4000);
+ ret = xxusb_stack_execute(hdev, intbuf);
+ return ret;
+}
+
+/*
+****** CAMAC_C **********************
+
+ Performs a CAMAC clear
+
+ Parameters:
+ hdev: USB device handle returned from an open function
+
+ Returns:
+ Number of bytes written to xxusb when successful
+ Upon failure, a negative number
+*/
+short CAMAC_C(usb_dev_handle *hdev)
+{
+ Uint32_t intbuf[4];
+ int ret;
+ intbuf[0]=1;
+ intbuf[1]=(Uint32_t)(29+932+28512 + 0x4000);
+ ret = xxusb_stack_execute(hdev, intbuf);
+ return ret;
+}
+
+/*
+****** CAMAC_I **********************
+
+ Set CAMAC inhibit
+
+ Parameters:
+ hdev: USB device handle returned from an open function
+
+ Returns:
+ Number of bytes written to xxusb when successful
+ Upon failure, a negative number
+*/
+short CAMAC_I(usb_dev_handle *hdev, int inhibit)
+{
+ Uint32_t intbuf[4];
+ int ret;
+ intbuf[0]=1;
+ if (inhibit) intbuf[1]=(Uint32_t)(24+932+29512 + 0x4000);
+ else intbuf[1]=(Uint32_t)(26+932+29512 + 0x4000);
+ ret = xxusb_stack_execute(hdev, intbuf);
+ return ret;
+}
+
+

/praktikum/petdaqfmf/libxxusb.cpp
Property changes:
Added: svn:executable
Index: praktikum/petdaqfmf/VMEModule.cc
===================================================================
--- praktikum/petdaqfmf/VMEModule.cc (nonexistent)
+++ praktikum/petdaqfmf/VMEModule.cc (revision 112)
@@ -0,0 +1,42 @@
+/********************\
+ VMEModule.hh
+\********************/
+
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/mman.h>
+#include "VMEModule.hh"
+#include "wienvme_dll.h"
+
+
+VMEModule::VMEModule(int device ,caddr_t vmeaddr, size_t size) {
+ m_vmeaddr = vmeaddr;
+ m_baseaddress = (unsigned long)(vmeaddr) ;
+}
+
+VMEModule::~VMEModule() {
+
+}
+
+void VMEModule::write32( unsigned long address, unsigned long value ) {
+ VME_write32(address, (void *) &value);
+}
+
+unsigned long VMEModule::read32( unsigned long address ){
+ unsigned long data;
+ VME_read32( address, (void *) &data);
+ return data;
+}
+
+void VMEModule::write16( unsigned long address, unsigned short value ) {
+ VME_write16( address, (void *) &value);
+}
+
+unsigned short VMEModule::read16( unsigned long address ){
+ unsigned long data;
+ VME_read16( address, (void *) &data);
+ return (short) (data& 0xFFFF);
+}
+
+
Index: praktikum/petdaqfmf/CAENV965.h
===================================================================
--- praktikum/petdaqfmf/CAENV965.h (nonexistent)
+++ praktikum/petdaqfmf/CAENV965.h (revision 112)
@@ -0,0 +1,13 @@
+#ifndef _CAENV965_H
+#define _CAENV965_H
+
+#define _VI_FUNC
+
+int _VI_FUNC V965_map (int ModuleNumber, unsigned long ModuleOffset, int print) ;
+int _VI_FUNC V965_init (int ModuleNumber, unsigned short ped) ;
+int _VI_FUNC V965_clear (int ModuleNumber) ;
+int _VI_FUNC V965_status (int ModuleNumber) ;
+int _VI_FUNC V965_status2 (int ModuleNumber) ;
+int _VI_FUNC V965_read (int ModuleNumber, unsigned long whereto[],int len);
+
+#endif
Index: praktikum/petdaqfmf/libxxusb.h
===================================================================
--- praktikum/petdaqfmf/libxxusb.h (nonexistent)
+++ praktikum/petdaqfmf/libxxusb.h (revision 112)
@@ -0,0 +1,114 @@
+#include <usb.h>
+
+
+#define XXUSB_WIENER_VENDOR_ID 0x16DC /* Wiener, Plein & Baus */
+#define XXUSB_VMUSB_PRODUCT_ID 0x000B /* VM-USB */
+#define XXUSB_CCUSB_PRODUCT_ID 0x0001 /* CC-USB */
+#define XXUSB_ENDPOINT_OUT 2 /* Endpoint 2 Out*/
+#define XXUSB_ENDPOINT_IN 0x86 /* Endpoint 6 In */
+#define XXUSB_FIRMWARE_REGISTER 0
+#define XXUSB_GLOBAL_REGISTER 1
+#define XXUSB_ACTION_REGISTER 10
+#define XXUSB_DELAYS_REGISTER 2
+#define XXUSB_WATCHDOG_REGISTER 3
+#define XXUSB_SELLEDA_REGISTER 6
+#define XXUSB_SELNIM_REGISTER 7
+#define XXUSB_SELLEDB_REGISTER 4
+#define XXUSB_SERIAL_REGISTER 15
+#define XXUSB_LAMMASK_REGISTER 8
+#define XXUSB_LAM_REGISTER 12
+#define XXUSB_READOUT_STACK 2
+#define XXUSB_SCALER_STACK 3
+#define XXUSB_NAF_DIRECT 12
+
+// dodal 19.4.2011 da dela na 64-bit masinah
+typedef unsigned int Uint32_t;
+
+struct XXUSB_STACK
+{
+Uint32_t Data;
+short Hit;
+short APatt;
+short Num;
+short HitMask;
+};
+
+struct XXUSB_CC_COMMAND_TYPE
+{
+short Crate;
+short F;
+short A;
+short N;
+Uint32_t Data;
+short NoS2;
+short LongD;
+short HitPatt;
+short QStop;
+short LAMMode;
+short UseHit;
+short Repeat;
+short AddrScan;
+short FastCam;
+short NumMod;
+short AddrPatt;
+Uint32_t HitMask[4];
+Uint32_t Num;
+};
+
+struct xxusb_device_typ
+{
+ struct usb_device *usbdev;
+ char SerialString[7];
+};
+
+typedef struct xxusb_device_typ xxusb_device_type;
+typedef unsigned char UCHAR;
+typedef struct usb_bus usb_busx;
+
+
+int xxusb_longstack_execute(usb_dev_handle hDev, void DataBuffer, int lDataLen, int timeout);
+int xxusb_bulk_read(usb_dev_handle hDev, void DataBuffer, int lDataLen, int timeout);
+int xxusb_bulk_write(usb_dev_handle hDev, void DataBuffer, int lDataLen, int timeout);
+int xxusb_usbfifo_read(usb_dev_handle hDev, int DataBuffer, int lDataLen, int timeout);
+
+short xxusb_register_read(usb_dev_handle hDev, short RegAddr, Uint32_t RegData);
+short xxusb_stack_read(usb_dev_handle hDev, short StackAddr, Uint32_t StackData);
+short xxusb_stack_write(usb_dev_handle hDev, short StackAddr, Uint32_t StackData);
+short xxusb_stack_execute(usb_dev_handle hDev, Uint32_t StackData);
+short xxusb_register_write(usb_dev_handle *hDev, short RegAddr, Uint32_t RegData);
+short xxusb_reset_toggle(usb_dev_handle *hDev);
+
+short xxusb_devices_find(xxusb_device_type *xxusbDev);
+short xxusb_device_close(usb_dev_handle *hDev);
+usb_dev_handle* xxusb_device_open(struct usb_device *dev);
+short xxusb_flash_program(usb_dev_handle hDev, char config, short nsect);
+short xxusb_flashblock_program(usb_dev_handle hDev, UCHAR config);
+usb_dev_handle* xxusb_serial_open(char *SerialString);
+
+short VME_register_write(usb_dev_handle *hdev, Uint32_t VME_Address, Uint32_t Data);
+short VME_register_read(usb_dev_handle hdev, Uint32_t VME_Address, Uint32_t Data);
+short VME_LED_settings(usb_dev_handle *hdev, int LED, int code, int invert, int latch);
+short VME_DGG(usb_dev_handle *hdev, unsigned short channel, unsigned short trigger,unsigned short output, Uint32_t delay, unsigned short gate, unsigned short invert, unsigned short latch);
+
+short VME_Output_settings(usb_dev_handle *hdev, int Channel, int code, int invert, int latch);
+
+short VME_read_16(usb_dev_handle hdev,short Address_Modifier, Uint32_t VME_Address, Uint32_t Data);
+short VME_read_32(usb_dev_handle hdev, short Address_Modifier, Uint32_t VME_Address, Uint32_t Data);
+short VME_BLT_read_32(usb_dev_handle *hdev, short Address_Modifier, int count, Uint32_t VME_Address, Uint32_t Data[]);
+short VME_write_16(usb_dev_handle *hdev, short Address_Modifier, Uint32_t VME_Address, Uint32_t Data);
+short VME_write_32(usb_dev_handle *hdev, short Address_Modifier, Uint32_t VME_Address, Uint32_t Data);
+
+short CAMAC_DGG(usb_dev_handle *hdev, short channel, short trigger, short output, int delay, int gate, short invert, short latch);
+short CAMAC_register_read(usb_dev_handle hdev, int A, Uint32_t Data);
+short CAMAC_register_write(usb_dev_handle *hdev, int A, Uint32_t Data);
+short CAMAC_LED_settings(usb_dev_handle *hdev, int LED, int code, int invert, int latch);
+short CAMAC_Output_settings(usb_dev_handle *hdev, int Channel, int code, int invert, int latch);
+short CAMAC_read_LAM_mask(usb_dev_handle hdev, Uint32_t Data);
+short CAMAC_write_LAM_mask(usb_dev_handle *hdev, Uint32_t Data);
+
+short CAMAC_write(usb_dev_handle hdev, int N, int A, int F, Uint32_t Data, int Q, int *X);
+short CAMAC_read(usb_dev_handle hdev, int N, int A, int F, Uint32_t Data, int Q, int X);
+short CAMAC_Z(usb_dev_handle *hdev);
+short CAMAC_C(usb_dev_handle *hdev);
+short CAMAC_I(usb_dev_handle *hdev, int inhibit);
+

/praktikum/petdaqfmf/libxxusb.h
Property changes:
Added: svn:executable
Index: praktikum/petdaqfmf/daq.C
===================================================================
--- praktikum/petdaqfmf/daq.C (nonexistent)
+++ praktikum/petdaqfmf/daq.C (revision 112)
@@ -0,0 +1,583 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/mman.h>
+#include <errno.h>
+#include <ctype.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/stat.h>
+#include <signal.h>
+#include <zlib.h>
+
+#include "CAENV965_DEF.h"
+#include "VmUsbStack.h"
+
+#include "vme.h"
+
+#include "daq.h"
+
+#define VERSION 1.0
+#define TIMEOUT 3
+
+
+/* VME modules */
+
+#define CAEN_V792 0x340000 // IJS V792
+#define CAEN_V792_1 0x530000 // FMF1 V792
+#define CAEN_V792_2 0x630000 // FMF2 V792
+#define CAEN_V965 0x350000 // IJS V965
+int addr[3]={CAEN_V792,CAEN_V792_1,CAEN_V965 };
+int nadc=3;
+
+int gPedestal = 255;
+
+#define BUFF_L 2048
+static int stackwrite[10000];
+static int stackdata[10000],stackdump[27000];
+
+
+/************************************************/
+int weight_while(int num)
+{
+ int i, tmp;
+
+ for ( i =0; i <num; i++ ) tmp = 0;
+ return 0;
+}
+#define WWHILE weight_while(0)
+
+#define TRUE 1
+#define FALSE 0
+
+int timer_out;
+struct sigaction oact;
+void timerast (int signumber)
+{
+ timer_out = TRUE;
+ fprintf(stderr,"TIMEOUT !!!\n");
+}
+
+void tmlnk (int tout)
+{
+ timer_out = FALSE;
+ struct sigaction act;
+ struct itimerval tdelay;
+
+ act.sa_handler = timerast;
+ sigemptyset (&act.sa_mask);
+ act.sa_flags = 0;
+
+ tdelay.it_value.tv_sec = tout / 100;
+ tdelay.it_value.tv_usec = 10000 * (tout % 100);
+ tdelay.it_interval.tv_sec = 0;
+ tdelay.it_interval.tv_usec = 0;
+
+ if (sigaction (SIGALRM, &act, &oact) < 0)
+ {
+ perror ("sigaction(tmlnk)");
+ exit (EXIT_FAILURE);
+ }
+ if (setitimer (ITIMER_REAL, &tdelay, NULL) < 0)
+ {
+ perror ("setitimer(tmlnk)");
+ exit (EXIT_FAILURE);
+ }
+}
+
+void tmulk ()
+{
+ struct itimerval tdelay;
+
+ tdelay.it_value.tv_sec = 0;
+ tdelay.it_value.tv_usec = 0;
+ tdelay.it_interval.tv_sec = 0;
+ tdelay.it_interval.tv_usec = 0;
+
+ if (setitimer (ITIMER_REAL, &tdelay, NULL) < 0)
+ {
+ perror ("setitimer(tmulk)");
+ exit (EXIT_FAILURE);
+ }
+ if (sigaction (SIGALRM, &oact, NULL) < 0)
+ {
+ perror ("sigaction(tmulk)");
+ exit (EXIT_FAILURE);
+ }
+}
+
+int fexist( char * path){
+ struct stat sbuf;
+ int res;
+ if(!path \|\| !*path) return 0;
+ res=stat(path,&sbuf);
+ if (res){
+ if (errno==ENOENT) {
+ return 0;
+ } else {
+ return -1;
+ }
+ }
+ return 1;
+}
+
+
+
+
+int daq::init(){
+
+ xxusb_register_write(udev,1,0x0); // Stop DAQ mode
+ while (xxusb_usbfifo_read(udev,(int *) stackdump,BUFF_L,100)>0);
+
+
+ int rate=1000;
+ int i=80000000/rate-40; // 80 MHz
+ if (i<72) i=72;
+ // Set DGG channel A as a pulser, output on O1,
+ // with delay =500 x 12.5ns,
+ // and width = 500 x 12.5ns,
+ // not latching or inverting
+ // VME_DGG(udev,0,6,0,24000,6000,0,0);
+ VME_DGG(udev,0,6,0,i,40,0,0);
+ // Set DGG channel B to trigger on NIM1, output on O2,
+ // with delay =200 x 12.5ns,
+ // and width = 200 x 12.5ns,
+ // not latching or inverting
+ VME_DGG(udev,1,1,1,0,10,0,1);
+
+
+// INIT stackdata
+ int fPedestal=gPedestal;
+ printf("CAEN V965 Pedestal set to %d\n", fPedestal);
+ if (fInit != NULL ) delete fInit;
+ fInit=new VmUsbStack();
+
+ for (int i=0;i<nadc;i++){
+ fInit->WriteA24D16( addr[i] + CAENV965_CRN , 0x0);
+ fInit->WriteA24D16( addr[i] + CAENV965_GEO , i);
+ fInit->ReadA24D16(addr[i] + CAENV965_GEO);
+ for (int j=0;j<32;j++){
+ fInit->WriteA24D16(addr[i] + CAENV965_THM + 0x02j, fThreshold[j+i32]); // threshold/kill for 32 channels
+ }
+ fInit->WriteA24D16( addr[i] + CAENV965_BS1, 0x80 ); // soft reset
+ fInit->WriteA24D16( addr[i] + CAENV965_BC1, 0x80 ); // soft reset
+ fInit->WriteA24D16( addr[i] + CAENV965_PED, fPedestal ); // pedestal
+ fInit->WriteA24D16( addr[i] + CAENV965_BS2,0x5000);
+ fInit->WriteA24D16( addr[i] + CAENV965_BS2,0x4); // clear module
+ fInit->WriteA24D16( addr[i] + CAENV965_BC2,0x4);
+ }
+ fInit->Marker(0xFAFC);
+
+// fInit->Print();
+
+
+ // READOUT stackdata
+ if (fStack != NULL ) delete fStack;
+ fStack=new VmUsbStack();
+ fStack->Marker(0xFFAB);
+ //fStack->ConditionalRead(addr[i] + CAENV965_SR1,0x1); // TRG wait : loop until bit 0 is on
+ // fStack->RepeatRead( CMD_A24, CMD_D32, addr[i] + CAENV965_OB,34,0); // repead read
+ //fStack->ConditionalRead(addr[i] + CAENV965_OB ,0x4000000) ; // loop until bit 26 is on, read data
+ for (int j=0;j<36;j++) fStack->ReadA24D32(addr[0] + CAENV965_OB);
+ for (int j=0;j<36;j++) fStack->ReadA24D32(addr[1] + CAENV965_OB);
+ for (int j=0;j<8;j++) fStack->ReadA24D32(addr[2] + CAENV965_OB);// 4 channels connected
+ fStack->Marker(0xFAFB);
+
+ for (int i=0;i<nadc;i++){
+ fStack->WriteA24D16(addr[i] + CAENV965_BS2,0x4); // clear module
+ fStack->WriteA24D16(addr[i] + CAENV965_BC2,0x4);
+ }
+
+ //fStack->Print();
+
+ VME_LED_settings(udev, 0,0,0,0); // Set Yellow LED to light with with USB out buffer not empty
+ VME_LED_settings(udev, 1,1,0,0); // Set Red LED to light with NIM1
+ VME_LED_settings(udev,2,0,0,0); // Set Green LED to light when stack is not empty
+
+ Uint32_t vmereg;
+ VME_register_read(udev,0x00,&vmereg);
+ printf("VMUSB Firmware ID -> 0x%08X\n",vmereg);
+
+ VME_register_read(udev,0x04,&vmereg);
+ printf("VMUSB Global Mode -> 0x%08X\n",vmereg);
+
+ vmereg=(vmereg&0xF000)\|0x0004;
+ VME_register_write(udev,0x04,vmereg);
+ VME_register_write(udev,0x08,0x00000080);
+ VME_register_write(udev,0x28,0x0);
+ VME_register_write(udev,0x2C,0x0);
+ VME_register_write(udev,0x30,0x0);
+ VME_register_write(udev,0x34,0x0);
+ VME_register_write(udev,0x3C,0x000);
+
+ int nb = fInit->Get(10000,stackdata);
+ int ret= xxusb_stack_execute(udev,(Uint32_t *)stackdata);
+ printf("Init::%d ret=%d\n",nb,ret);
+ if (ret>0) for (int i=0;i<ret/2;i++) printf ("stackdata=0x%08X\n",stackdata[i]);
+
+ int nb0= fStack->Get(10000,&stackwrite[0]);
+ if (nb0>768) {
+ fprintf(stderr,"nb0=%d > 768 error xxusb_stack_write\n", nb0);
+ exit(-1);
+ }
+ nb =xxusb_stack_write(udev,0x2,(Uint32_t *) stackwrite);
+ nb0=xxusb_stack_read(udev,0x2,(Uint32_t *) stackdata);
+ for (int i=0;i<stackwrite[0]+1;i++){
+ if (stackdata[i]!=stackwrite[i]) printf("%d %d init err %x %x\n",nb,nb0,stackwrite[i], stackdata[i]);
+ }
+
+ if (fMode==2) xxusb_register_write(udev,1,0x1); // Start DAQ mode
+
+ printf("daq::init() \n");
+ return 0;
+}
+
+int daq::connect(){
+ VME_START(NULL);
+ printf("daq::connect()\n");
+ return 0;
+}
+
+int daq::disconnect(){
+ /* zakljuci */
+ VME_STOP();
+ printf("daq::disconnect()\n");
+ return 0;
+}
+
+int daq:: clear(){
+ return 0;
+}
+
+inline int module_header(int recid,Uint32_t *data,int len){
+ data[0] = recid;
+ data[1] = (len >0)? len : 0 ;
+ return data[1]+2;
+}
+
+
+int daq::event(unsigned int data, int maxn, int ctr, int print){
+ int tout=200; /* 1/100 of a second */
+ const int lsize=sizeof(unsigned Uint32_t);
+
+
+ ctr[0]++;
+ ctr[1]++;
+
+ int count=0;
+
+ switch (fMode){
+ case 0:// normal calls
+ {
+ unsigned short clr= 0x4;
+ unsigned int status=0;
+ Uint32_t mdata;
+
+ for (int i=0;i<2;i++){
+ // wait for trg
+ tmlnk (tout);
+ do VME_A24D16_R( addr[i] + CAENV965_SR1, &status); while ( (status&0x1)==0 && timer_out==0 );
+ tmulk();
+ // readout data
+ if (timer_out) return 0;
+ int len=0;
+
+ do {
+ VME_A24D32_R(addr[i] + CAENV965_OB, &mdata);
+ mdata=data[count++];
+ len++;
+ } while ( (mdata & 0x4000000)==0 && timer_out==0) ; // bit 26 EOB or not valid datum
+ // clear
+ VME_A24D16_W( addr[i] + CAENV965_BS2, &clr);
+ VME_A24D16_W( addr[i] + CAENV965_BC2, &clr);
+
+ if (count+2<maxn) {
+ if (print) printf("V965 %3d\n",len);
+ count+=module_header(0x130+i,&data[count],len);
+ ctr[2]++;
+ ctr[3]+=len;
+ }
+
+ timer_out=0;
+ }
+ }
+ break;
+ case 1:// stack execute
+ {
+ fStack->Get(10000,(int *)data);
+ int ret=xxusb_stack_execute(udev,(Uint32_t *) data); //The first element of the array is the number of bytes.
+ if (ret< 0 ) {
+ printf ("xxusb_stack_execute error err=%d\n",ret); \
+ count = 0;
+ } else count= ret/lsize;
+
+ }
+ break;
+ case 2:// stack load
+ {
+ int ret=xxusb_usbfifo_read(udev,(int *) data,BUFF_L,100);
+ if (ret< 0 ) {
+ if (ret!=-110) {
+ printf ("xxusb_usbfifo_read error err=%d\n",ret);
+ end();
+ init();
+ }
+ count = 0;
+ } else {
+ if (0 && print && ret>0) {
+ for (int i=0;i<100;i++) {
+ printf ("%4d fifodata=0x%08X\n",i, data[i]);
+ if (data[i]==0xFAFB) break;
+ }
+ /*
+
+ 0 fifodata=0x0000000D
+ 1 fifodata=0x00000049
+ 2 fifodata=0x0000FFAB
+ 3 fifodata=0x00002000
+ 4 fifodata=0x00000200
+ 5 fifodata=0x00004141
+ 6 fifodata=0x00000000
+ 7 fifodata=0x00004057
+ 8 fifodata=0x00000010
+ 9 fifodata=0x00004052
+ 10 fifodata=0x00000001
+ 11 fifodata=0x0000405C
+ 12 fifodata=0x00000011
+ 13 fifodata=0x0000405D
+ 14 fifodata=0x00000002
+ 15 fifodata=0x0000405E
+ 16 fifodata=0x00000012
+ 17 fifodata=0x0000401C
+ 18 fifodata=0x00000003
+ 19 fifodata=0x0000402F
+ 20 fifodata=0x00000013
+ 21 fifodata=0x00004024
+ 22 fifodata=0x00000004
+ 23 fifodata=0x00004076
+ 24 fifodata=0x00000014
+ 25 fifodata=0x0000412F
+ 26 fifodata=0x00000005
+ 27 fifodata=0x0000404C
+ 28 fifodata=0x00000015
+ 29 fifodata=0x00004132
+ 30 fifodata=0x00000006
+ 31 fifodata=0x00004044
+ 32 fifodata=0x00000016
+ 33 fifodata=0x0000404A
+ 34 fifodata=0x00000007
+ 35 fifodata=0x0000409B
+ 36 fifodata=0x00000017
+ 37 fifodata=0x000040F1
+ 38 fifodata=0x00000008
+ 39 fifodata=0x00004087
+ 40 fifodata=0x00000018
+ 41 fifodata=0x00004173
+ 42 fifodata=0x00000009
+ 43 fifodata=0x0000404C
+ 44 fifodata=0x00000019
+ 45 fifodata=0x0000406C
+ 46 fifodata=0x0000000A
+ 47 fifodata=0x00004070
+ 48 fifodata=0x0000001A
+ 49 fifodata=0x0000406E
+ 50 fifodata=0x0000000B
+ 51 fifodata=0x00004014
+ 52 fifodata=0x0000001B
+ 53 fifodata=0x000040B7
+ 54 fifodata=0x0000000C
+ 55 fifodata=0x000040A9
+ 56 fifodata=0x0000001C
+ 57 fifodata=0x00004048
+ 58 fifodata=0x0000000D
+ 59 fifodata=0x00004118
+ 60 fifodata=0x0000001D
+ 61 fifodata=0x0000409D
+ 62 fifodata=0x0000000E
+ 63 fifodata=0x0000405B
+ 64 fifodata=0x0000001E
+ 65 fifodata=0x00004285
+ 66 fifodata=0x0000000F
+ 67 fifodata=0x00004159
+ 68 fifodata=0x0000001F
+ 69 fifodata=0x00000035
+ 70 fifodata=0x00000400
+ 71 fifodata=0x00000035
+ 72 fifodata=0x00000600
+ 73 fifodata=0x00000035
+ 74 fifodata=0x0000FAFB
+
+
+ */
+ }
+ if (print) printf("------------------ret=%d data[0]=%d\n",ret,(int)data[0]);
+ count= ret/lsize;
+ ctr[2]+=data[0];
+ ctr[3]+=count;
+ }
+ }
+ break;
+ }
+ return count*lsize;
+}
+
+int daq::end(){
+
+ xxusb_register_write(udev,1,0x0); // Stop DAQ mode
+ while (xxusb_usbfifo_read(udev,(int *) stackdata,BUFF_L,30)>0);
+ printf("daq::end()\n");
+ return 0;
+}
+
+daq::daq(){
+ fMode = 2;
+ fPedestal=255;
+ for (int i=0;i<128;i++){
+ if (i<72) fThreshold.push_back(0);
+ else fThreshold.push_back(0x1<<8); // samo 4 kanali na zadnjem modulu so enablani
+ }
+ fThresholdEnable=0;
+ fStop=0;
+ fInit=NULL;
+ fStack=NULL;
+ connect();
+}
+
+daq::~daq(){
+disconnect();
+}
+
+#ifdef MAIN
+/* ------------------- CatchSig ----------------- */
+int ctrlcflag=0;
+
+void SigInt (int sig)
+{
+ ctrlcflag = 1;
+ timer_out=1;
+}
+
+int main (int argc, char **argv){
+ // intercept routine
+ if (signal (SIGINT, SigInt) == SIG_ERR) {
+ perror ("sigignore");
+ }
+
+ // print welcome message
+ time_t t,told, tstart, tstop;
+ time(&t);
+ fprintf(stdout,"#############################################\n");
+ fprintf(stdout,"Program %s version %2.1f\n",argv[0], VERSION);
+ fprintf(stdout,"Compiled on %s %s\n",__DATE__, __TIME__);
+ fprintf(stdout,"Runtime %s \n",ctime(&t));
+ fprintf(stdout,"#############################################\n");
+
+
+ int neve=-1;
+ char cfname[100]="test.dat";
+ char *fname=cfname;
+ char *fpedname=NULL;
+
+#define BSIZE 10000
+ Uint32_t data[10000];
+
+
+ daq *d= new daq();
+ int c;
+
+ while ((c = getopt (argc, argv, "p:n:t:o:")) != -1)
+ switch (c)
+ {
+ case 'o':
+ sprintf(fname ,"%s", optarg);
+ if (fexist(fname)==1){
+ fprintf(stdout,"Error !\n");
+ fprintf(stdout,"File %s already exist. Appending ....\n",fname);
+ //fprintf(stdout,"Remove the file and restart !!!\n");
+ //exit(0);
+ }
+ break; // input file
+ case 'n':
+ neve = atoi(optarg); // negative argument time ( in s )limited event loop
+ break;
+ case 't':
+ {
+
+ sprintf(fpedname ,"%s", optarg);
+ FILE *fped=fopen(fpedname,"r");
+ int j=0;
+ int ndim=400;
+ char line[ndim];
+ int val=0;
+ while (fgets(line,ndim,fped)!=NULL){
+ sscanf(line,"%d",&val);
+ d->fThreshold[j++]=val;
+ }
+ d->fThresholdEnable=1;
+ //fclose(fped);
+ fclose(fped);
+ break;
+ }
+ case 'p':
+ gPedestal = atoi(optarg); // injected charge to the qdc
+ break;
+ }
+
+ if (argc==1) {
+ fprintf(stdout,"Usage: %s -o [filename] -n [number of events] -t [thresholdfile] -p <qdc inject charge>\n negative number of events = acq time in seconds\n",argv[0]);
+ exit(-1);
+ }
+ //FILE *fp=fopen(fname,"a");
+ gzFile fp=gzopen(fname,"a");
+
+ d->init();
+ d->clear();
+
+ int hdr[4]={2}; // recid od run 11 naprej
+ int i=0;
+ int ntotal=0;
+ int counters[30]={0,0,0,0,0, 0,0,0,0,0,0,0};
+ char names[10][20]={"TRG","CAEN V965"};
+ time(&t);
+ tstart=t;
+ tstop=tstart+360000;
+ if (neve<-1) {
+ tstop=tstart-neve;
+ neve=-1;
+ }
+ for (i=0;i!=neve && !ctrlcflag && t<tstop;i++){
+ time(&t);
+ if (t!=told ) printf("%d in %2.2f min daq::event() %s\n",i, (double)(t-tstart)/60., ctime(&t));
+ int nb=d->event(data,BSIZE, counters,t!=told);
+ if (nb>0){
+ // zapis v datoteko
+ hdr[1]=nb+4*sizeof(int);
+ hdr[2]=time(NULL);
+ hdr[3]=i;
+
+ //fwrite(hdr, sizeof(int),4 , fp);
+ gzwrite(fp, hdr, sizeof(int)*4); //gzip
+ // recid=1 do runa 10. ntotal += fwrite(data, sizeof(int),nb, fp);
+ //ntotal += fwrite(data, 1,nb, fp);
+ ntotal += gzwrite(fp, data, nb);
+ told=t;
+ } else i--;
+ }
+
+ d->end();
+ delete d;
+ printf("Number of Events: %d\n",i);
+ if (ctrlcflag) printf("User Program termination CTRL-C\n");
+ if (t>tstop ) printf("Timeout termination tstart# t>tstop: %d# %d >%d\n",(int)t, (int)tstart, (int) tstop);
+
+
+ //fclose(fp);
+ gzclose(fp);
+ fprintf(stdout,"%d bytes written to %s\nCounts:\n", (int) (ntotal*sizeof(int)),fname);
+ for (i=0;i<2;i++) fprintf(stdout,"%s\t%d\t%d\n",names[i],counters[2i],counters[2i+1]) ;
+
+
+ return 0;
+}
+#endif
Index: praktikum/petdaqfmf/.root_hist
===================================================================
--- praktikum/petdaqfmf/.root_hist (nonexistent)
+++ praktikum/petdaqfmf/.root_hist (revision 112)
@@ -0,0 +1,99 @@
+TBrowser tt
+.q
+TBrowser d
+TFile *_file0 = TFile::Open("test100.root")
+ach0->Draw()
+.q
+TFile *_file0 = TFile::Open("test50.root")
+ach0->Draw()
+.q
+TFile *_file0 = TFile::Open("test150.root")
+ach0->Draw()
+TFile *_file0 = TFile::Open("test250.root")
+ach0->Draw()
+TFile *_file0 = TFile::Open("test200.root")
+ach0->Draw()
+TFile *_file0 = TFile::Open("test150.root")
+ach0->Draw()
+TFile *_file0 = TFile::Open("test100.root")
+ach0->Draw()
+TFile *_file0 = TFile::Open("test50.root")
+ach0->Draw()
+.q
+TFile *_file0 = TFile::Open("test80.root")
+ach0->Draw()
+ach0->Draw()
+ach1->Draw()
+ach2->Draw()
+ach3->Draw()
+ach4->Draw()
+ach5->Draw()
+ach6->Draw()
+ach7->Draw()
+ach8->Draw()
+ach9->Draw()
+ach10->Draw()
+ach11->Draw()
+ach12->Draw()
+ach13->Draw()
+ach14->Draw()
+ach15->Draw()
+ach16->Draw()
+ach15->Draw()
+.q
+TFile *_file0 = TFile::Open("test80_reversed.root")
+ach15->Draw()
+ach1->Draw()
+ach2->Draw()
+ach3->Draw()
+ach4->Draw()
+ach4->Draw()
+.q
+TFile *_file0 = TFile::Open("test.root")
+ach4->Draw()
+1->Draw()
+a1->Draw()
+ach5->Draw()
+ach5->Draw()
+ach7->Draw()
+ach16->Draw()
+ach18->Draw()
+ach36->Draw()
+.q
+TFile *_file0 = TFile::Open("test1.root")
+ach7->Draw()
+ach17->Draw()
+ach7->Draw()
+.q
+TFile *_file0 = TFile::Open("test.root")
+ach7->Draw()
+ach27->Draw()
+ach17->Draw()
+ach18->Draw()
+ach16->Draw()
+ach15->Draw()
+ach14->Draw()
+ach13->Draw()
+.ls
+sumadc1->Draw()
+sumadc0->Draw()
+cadc0->Draw()
+pmt0->Draw()
+pmt1->Draw()
+pmt0->Draw()
+sumadc0->Draw()
+.q
+TFile *_file0 = TFile::Open("test_reversed.root")
+sumadc0->Draw()
+tbrowser
+TBrowser
+TBrowser jj
+.q
+TFile *_file0 = TFile::Open("test850.root")
+ach14->Draw()
+ach11->Draw()
+ach0->Draw()
+ach15->Draw()
+ach16->Draw()
+ach15->Draw()
+.q
Index: praktikum/petdaqfmf/wienvme_dll.h
===================================================================
--- praktikum/petdaqfmf/wienvme_dll.h (nonexistent)
+++ praktikum/petdaqfmf/wienvme_dll.h (revision 112)
@@ -0,0 +1,53 @@
+#ifndef _WIENVME_DLL_H
+#define _WIENVME_DLL_H
+
+#include "libxxusb.h"
+
+extern usb_dev_handle *udev;
+
+
+
+int VME_start (char*);
+int VME_close (int);
+int VME_stop (void);
+int VME_reset (void);
+
+
+int VME_read16 (Uint32_t, void*);
+int VME_read32 (Uint32_t, void*);
+
+int VME_write16 ( Uint32_t, void*);
+int VME_write32 ( Uint32_t, void*);
+
+#define VME_START(NODE) VME_start((NODE))
+#define VME_STOP() VME_stop()
+#define VME_RESET() VME_reset()
+
+#define VME_A24D16_R(VME,DATA) VME_read16( (VME), (DATA))
+#define VME_A24D32_R(VME,DATA) VME_read32( (VME), (DATA))
+
+#define VME_A24D16_W(VME,DATA) VME_write16( (VME), (DATA))
+#define VME_A24D32_W(VME,DATA) VME_write32( (VME), (DATA))
+
+#define VME_A32D16_R(VME,DATA) VME_read16( (VME), (DATA))
+#define VME_A32D32_R(VME,DATA) VME_read32( (VME), (DATA))
+
+#define VME_A32D16_W(VME,DATA) VME_write16( (VME), (DATA))
+#define VME_A32D32_W(VME,DATA) VME_write32( (VME), (DATA))
+
+typedef unsigned short ADDRESS_MODIFIER;
+
+#define Std_Sup_Data (ADDRESS_MODIFIER)0x3d
+#define Std_Sup_Prog (ADDRESS_MODIFIER)0x3e
+#define Std_NoPriv_Data (ADDRESS_MODIFIER)0x39
+#define Std_NoPriv_Prog (ADDRESS_MODIFIER)0x3a
+
+#define Short_Sup (ADDRESS_MODIFIER)0x2d
+#define Short_NoPriv (ADDRESS_MODIFIER)0x29
+
+#define Ext_Sup_Data (ADDRESS_MODIFIER)0x0d
+#define Ext_Sup_Prog (ADDRESS_MODIFIER)0x0e
+#define Ext_NoPriv_Data (ADDRESS_MODIFIER)0x09
+#define Ext_NoPriv_Prog (ADDRESS_MODIFIER)0x0a
+
+#endif

/praktikum/petdaqfmf/wienvme_dll.h
Property changes:
Added: svn:executable
Index: praktikum/petdaqfmf/VMEModule.hh
===================================================================
--- praktikum/petdaqfmf/VMEModule.hh (nonexistent)
+++ praktikum/petdaqfmf/VMEModule.hh (revision 112)
@@ -0,0 +1,39 @@
+/********************\
+ VMEModule.hh
+
+ update: 04/01/28
+
+\********************/
+
+#ifndef VMEMODULE_HH
+#define VMEMODULE_HH
+
+
+
+#include <stdio.h>
+#include <sys/types.h>
+#include "pcivme_ni.h"
+
+#define VMEA24 (unsigned short)0x39
+#define VMEA32 (unsigned short)0x09
+#define VMEA16 (unsigned short)0x29
+class VMEModule {
+protected:
+ int m_fd;
+ int m_vmeptr;
+ caddr_t m_vmeaddr;
+ size_t m_size;
+ unsigned long m_baseaddress;
+public:
+ VMEModule(int device, caddr_t vmeaddr, size_t size);
+ ~VMEModule();
+ unsigned long getBaseAddress() { return (unsigned long) m_baseaddress; }
+ caddr_t getVmeAddress() { return m_vmeaddr; }
+ void write32(unsigned long address, unsigned long value);
+ unsigned long read32(unsigned long address);
+
+ void write16(unsigned long address, unsigned short value);
+ unsigned short read16(unsigned long address);
+};
+
+#endif
Index: praktikum/petdaqfmf/daq.h
===================================================================
--- praktikum/petdaqfmf/daq.h (nonexistent)
+++ praktikum/petdaqfmf/daq.h (revision 112)
@@ -0,0 +1,24 @@
+#ifndef _daq_h_
+#define _daq_h_
+#include <vector>
+class VmUsbStack;
+class daq {
+public:
+ VmUsbStack * fStack;
+ VmUsbStack * fInit;
+ int fPedestal;
+ int fThresholdEnable;
+ std::vector<int> fThreshold;
+ int fStop;
+ int fMode;
+ int clear();
+ int end();
+ int event(unsigned int , int,int, int );
+ int init();
+ int connect();
+ int disconnect();
+ daq();
+ ~daq();
+};
+
+#endif
Index: praktikum/petdaqfmf/README
===================================================================
--- praktikum/petdaqfmf/README (nonexistent)
+++ praktikum/petdaqfmf/README (revision 112)
@@ -0,0 +1,2 @@
+./daq -o [filename] -n [number of events] -t [thresholdfile] -p <qdc inject charge>
+ negative number of events = acq time in seconds
Index: praktikum/petdaqfmf/pcivme_ni.h
===================================================================
--- praktikum/petdaqfmf/pcivme_ni.h (nonexistent)
+++ praktikum/petdaqfmf/pcivme_ni.h (revision 112)
@@ -0,0 +1,84 @@
+#ifndef __PCIVME_NI_H__
+#define __PCIVME_NI_H__
+
+//-------------------------------------------------------------------------------------------
+// pcivme_ni.h - header for ni-labview shared library or dll for ARW pcivme interface
+// this library can also be used for other purposes aside from labview
+//
+// Copyright (C) 2002-2004 ARW Elektronik Germany
+//
+// this source code is published under LGPL (Open Source). You can use, redistrubute and
+// modify it unless this header is not modified or deleted. No warranty is given that
+// this software will work like expected.
+// This product is not authorized for use as critical component in life support systems
+// wihout the express written approval of ARW Elektronik Germany.
+//
+// Please announce changes and hints to ARW Elektronik
+//
+// $Log: pcivme_ni.h,v $
+// Revision 1.8 2004/08/13 19:23:45 klaus
+// conversion to kernel-version 2.6, released version 3.0
+//
+// Revision 1.7 2002/10/20 18:07:18 klaus
+// changed error handling
+//
+// Revision 1.6 2002/10/18 21:56:28 klaus
+// completed functional features, untested
+//
+// Revision 1.5 2002/10/18 21:56:28 klaus
+// completed functional features, untested
+//
+// Revision 1.4 2002/10/17 21:16:03 klaus
+// filled function bodies
+//
+// Revision 1.3 2002/10/17 21:16:03 klaus
+// filled function bodies
+//
+// Revision 1.2 2002/10/17 19:05:03 klaus
+// VME access is working through test to lib to driver
+//
+// Revision 1.1 2002/10/12 22:04:44 klaus
+// first work done
+//
+// what who when
+// first steps AR 17.11.1999
+// VMEerror new AR 07.01.2000
+// made LINUX shared library from windows template AR 12.10.2002
+//
+
+//-------------------------------------------------------------------------------------------
+// INCLUDES
+//
+#define BOOLEAN int
+#if !defined(TRUE) && !defined(FALSE)
+ #define FALSE 0
+ #define TRUE 1
+#endif
+
+//-------------------------------------------------------------------------------------------
+// PROTOTYPES
+//
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+int VMEopen(const char cszDeviceName, unsigned char ubAddressModifier, int pnHandle);
+int VMEinit(const char cszDeviceName, unsigned short nVMEMM, unsigned char ubAddressModifier, int pnHandle);
+int setAccessProperties(int nHandle, unsigned char bModifier, unsigned char bAccessType);
+int VMEread(int nHandle, unsigned long ulAddress, unsigned char ubAccessWidth, unsigned long ulElementCount, void *pvBuffer);
+int VMEwrite(int nHandle, unsigned long ulAddress, unsigned char ubAccessWidth, unsigned long ulElementCount, void *pvBuffer);
+int VMEaccessVIC(int nHandle, unsigned char ubAccessMode, unsigned short uwAddress, unsigned char *ubContent);
+int VMEreset(int nHandle);
+int VMETAS(int nHandle, unsigned long ulAddress, unsigned char *ubResult);
+int VMEcontrolInterrupt(int nHandle, BOOLEAN *bEnable);
+int VMEinterrupt(int nHandle, unsigned char *ubVector);
+int VMEsysfailGet(int nHandle, BOOLEAN *bResult);
+int VMEsysfailSet(int nHandle, BOOLEAN bForce);
+int VMEerror(int nHandle);
+int VMEclose(int nHandle);
+int GetLastError(int nHandle);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __PCIVME_NI_H__ */
Index: praktikum/petdaqfmf/wienvmeusb_dll.c
===================================================================
--- praktikum/petdaqfmf/wienvmeusb_dll.c (nonexistent)
+++ praktikum/petdaqfmf/wienvmeusb_dll.c (revision 112)
@@ -0,0 +1,98 @@
+#include <stdlib.h>
+#include <stdio.h>
+#include "pcivme_ni.h"
+#include "wienvme_dll.h"
+//----------- DEFINES -----------------------------------------------------
+#define DEVICENAME_LINUX "/dev/vmemm_1" // a device name 'template' for WINNT
+
+usb_dev_handle *udev;
+
+
+
+
+int VME_start (char* serial)
+{
+
+ char serial_default[100];
+ sprintf(serial_default, "VM0120");
+ if (serial != NULL)
+ udev = xxusb_serial_open(serial);
+ else
+ udev = xxusb_serial_open(serial_default);
+ printf(" VME_start %s--->udev!=NULL ==>%d\n", serial, udev!=NULL);
+ if (!udev) {
+ printf(" Check usb udev permissions and restart! Exiting .....\n", serial, udev!=NULL);
+ exit(-1);
+ }
+ return 0;
+}
+
+
+
+int VME_stop ()
+{
+ if (udev) xxusb_device_close(udev);
+
+
+ return 0;
+}
+
+short Address_Modifier= Std_NoPriv_Data;
+
+int VME_read16 (Uint32_t at, void* buff)
+{
+ int result;
+
+/* D16 read */
+
+ result = VME_read_16(udev, Address_Modifier, at , (Uint32_t *) buff);
+ if (result <0) {
+ printf("D16 read at 0x%X failed! err=%d\n", at,result);
+ }
+// printf("0x%X, 0x%X, 0x%X, 0x%X\n", hHandle, at, n, * (unsigned short *) buff);
+ return (result);
+}
+
+int VME_read32 (Uint32_t at, void* buff)
+{
+ int result;
+
+/* D32 read */
+
+ result = VME_read_32(udev, Address_Modifier, at , (Uint32_t *) buff);
+ if (result < 0) {
+ printf("D32 read at 0x%X failed err=%d!\n", at,result);
+ }
+ //printf("0x%X, 0x%X, 0x%X, 0x%X\n", hHandle, at, n, * (unsigned short *) buff);
+ return (result);
+}
+
+int VME_write16 (Uint32_t at, void* buff)
+{
+ int result;
+ Uint32_t data= ((short )buff);
+
+/* D16 write */
+
+ result = VME_write_16(udev, Address_Modifier, at, data );
+ if (result<0) {
+ printf("D16 write at 0x%X failed! err=%d\n", at,result);
+ }
+ return (result);
+}
+
+int VME_write32 ( Uint32_t at, void* buff)
+{
+ int result;
+ Uint32_t data= ((Uint32_t )buff);
+
+/* D32 write */
+
+ result = VME_write_32(udev, Address_Modifier, at, data );
+
+ if (result<0) {
+ printf("D32 write at 0x%X failed! err=%d\n", at,result);
+ }
+ //printf("D32 write at 0x%lX buff=0x%X\n", at,((int*) buff)[0]);
+ return (result);
+}

/praktikum/petdaqfmf/wienvmeusb_dll.c
Property changes:
Added: svn:executable
Index: praktikum/petdaqfmf/LinkDef.h
===================================================================
--- praktikum/petdaqfmf/LinkDef.h (nonexistent)
+++ praktikum/petdaqfmf/LinkDef.h (revision 112)
@@ -0,0 +1,10 @@
+#ifdef __CINT__
+
+#pragma link off all globals;
+#pragma link off all classes;
+#pragma link off all functions;
+
+#pragma link C++ class daq;
+
+#endif
+
Index: praktikum/petdaqfmf/VmUsbStack.C
===================================================================
--- praktikum/petdaqfmf/VmUsbStack.C (nonexistent)
+++ praktikum/petdaqfmf/VmUsbStack.C (revision 112)
@@ -0,0 +1,124 @@
+#include <stdio.h>
+#include <vector>
+#include "VmUsbStack.h"
+
+VmUsbStack::VmUsbStack(){
+ fStack.push_back(0x1);
+ fStack.push_back(0x0);
+}
+
+VmUsbStack::~VmUsbStack(){
+ fStack.clear();
+}
+
+int VmUsbStack::Get(int maxn, int *stack){
+ for (int i=0;i<fStack.size();i++){
+ if (i<maxn) stack[i]=fStack[i]; else return -1;
+ }
+ return fStack[0];
+}
+
+
+void VmUsbStack::Append(int cmd, int addr ){
+ fStack.push_back(cmd & 0xFFFF);
+ fStack.push_back(cmd >> 16);
+ fStack.push_back(addr&0xFFFF);
+ fStack.push_back((addr >> 16)& 0xFFFF);
+ fStack[0]=fStack.size()-1;
+}
+
+void VmUsbStack::Append(int cmd, int addr , int data){
+ Append( cmd, addr );
+ fStack.push_back(data&0xFFFF);
+ fStack.push_back((data >> 16)&0xFFFF);
+ fStack[0] = fStack.size()-1;
+}
+
+void VmUsbStack::ReadA24D16(int addr ){
+ Append(CMD_READ \| CMD_A24 , CMD_D16 \| addr);
+}
+
+void VmUsbStack::WriteA24D16(int addr, int data){
+ return Append(CMD_WRITE \| CMD_A24,CMD_D16 \| addr, data);
+}
+
+void VmUsbStack::ReadA24D32(int addr ){
+ Append(CMD_READ \| CMD_A24 , CMD_D32 \| addr);
+}
+
+void VmUsbStack::WriteA24D32(int addr, int data){
+ return Append(CMD_WRITE \| CMD_A24 , CMD_D32 \| addr, data);
+}
+
+void VmUsbStack::ReadA32D16(int addr ){
+ Append(CMD_READ \| CMD_A32 , CMD_D16\| addr);
+}
+
+void VmUsbStack::WriteA32D16(int addr, int data){
+ return Append(CMD_WRITE \| CMD_A32 , CMD_D16 \| addr, data);
+}
+
+void VmUsbStack::ReadA32D32(int addr ){
+ Append(CMD_READ \| CMD_A32 , CMD_D32 \| addr);
+}
+
+void VmUsbStack::WriteA32D32(int addr, int data){
+ return Append(CMD_WRITE \| CMD_A32 , CMD_D32\| addr, data);
+}
+
+
+void VmUsbStack::Marker(int marker){
+ return Append(CMD_MRK, marker);
+}
+
+void VmUsbStack::ConditionalRead(int adr_mod,int d16d32, int addr, int bmask){
+ Append(CMD_READ\| CMD_HD \| adr_mod ,addr);
+ Append(CMD_READ\| CMD_HD \| CMD_HM \|adr_mod, d16d32 \|addr,bmask);
+}
+
+void VmUsbStack::RepeatRead(int adr_mod,int d16d32, int baseaddr, int n, int increment){
+ for (int i=0;i<n;i++) Append( adr_mod \| CMD_READ, d16d32 +baseaddr + i*increment);
+}
+void VmUsbStack::RepeatWrite(int adr_mod,int d16d32,int baseaddr, int n, int increment, int data){
+ for (int i=0;i<n;i++) Append( adr_mod \| CMD_WRITE,d16d32 + baseaddr+i*increment, data);
+}
+
+void VmUsbStack::Print(){
+ for (int i=0; i < fStack.size();i++) printf("0x%04x\n",fStack[i]);
+ printf("%d %d __________________________________\n",fStack.size(),fStack[0]);
+}
+
+#ifdef MAIN
+#include "CAENV965_DEF.h"
+#define CAEN_V965 0x340000
+
+int main(){
+// INIT stackdata
+int geo=1,fPedestal=255;
+VmUsbStack *init=new VmUsbStack();
+init->Write(CAEN_V965 + CAENV965_CRN, 0x0);
+init->Write(CAEN_V965 + CAENV965_GEO, geo);
+init->RepeatWrite( CAEN_V965 + CAENV965_THM, 32, 0x02,0x0); // threshold/kill for 32 channels, 2*i addr increment
+init->Write( CAEN_V965 + CAENV965_BS1, 0x80 ); // soft reset
+init->Write( CAEN_V965 + CAENV965_BC1, 0x80 ); // soft reset
+init->Write( CAEN_V965 + CAENV965_PED, fPedestal ); // pedestal
+init->Write(CAEN_V965 + CAENV965_BS2,0x5000);
+init->Write(CAEN_V965 + CAENV965_BS2,0x4); // clear module
+init->Write(CAEN_V965 + CAENV965_BC2,0x4);
+init->Print();
+
+// READOUT stackdata
+VmUsbStack *stack=new VmUsbStack();
+stack->Write(CAEN_V965 + CAENV965_BS2,0x4); // clear module
+stack->Write(CAEN_V965 + CAENV965_BC2,0x4);
+stack->ConditionalRead(CAEN_V965 + CAENV965_SR1,0x1); // TRG wait : loop until bit 0 is on
+stack->ConditionalRead(CAEN_V965 + CAENV965_OB ,0x4000000) ; // loop until bit 26 is on, read data
+stack->Marker(0xFAFB);
+stack->Print();
+
+ int st[1000];
+ int nb= stack->Get(1000,st);
+ for (int i=0;i<nb;i++) if (st[i]!=stack->fStack[i]) printf("error i=%d 0x%04x 0x%04x \n",i,st[i],stack->fStack[i] );
+ return 0;
+}
+#endif
Index: praktikum/petdaqfmf/CAENV965_DEF.h
===================================================================
--- praktikum/petdaqfmf/CAENV965_DEF.h (nonexistent)
+++ praktikum/petdaqfmf/CAENV965_DEF.h (revision 112)
@@ -0,0 +1,22 @@
+#ifndef _CAENV965_DEF_H
+#define _CAENV965_DEF_H
+
+#define CAENV965_OB 0x0
+#define CAENV965_FW 0x1000
+#define CAENV965_GEO 0x1002
+#define CAENV965_MCA 0x1004
+#define CAENV965_BS1 0x1006
+#define CAENV965_BC1 0x1008
+#define CAENV965_SR1 0x100E
+#define CAENV965_CR1 0x1010
+#define CAENV965_ADH 0x1012
+#define CAENV965_ADL 0x1014
+#define CAENV965_SR2 0x1022
+#define CAENV965_BS2 0x1032
+#define CAENV965_BC2 0x1034
+#define CAENV965_CRN 0x103C
+#define CAENV965_ECR 0x1040
+#define CAENV965_PED 0x1060
+#define CAENV965_THM 0x1080
+
+#endif
Index: praktikum/petdaqfmf/gui.C
===================================================================
--- praktikum/petdaqfmf/gui.C (nonexistent)
+++ praktikum/petdaqfmf/gui.C (revision 112)
@@ -0,0 +1,455 @@
+// By ROOT version 5.17/02 on 2008-03-13 06:46:41
+
+#ifndef ROOT_TGDockableFrame
+#include "TGDockableFrame.h"
+#endif
+#ifndef ROOT_TGMenu
+#include "TGMenu.h"
+#endif
+#ifndef ROOT_TGMdiDecorFrame
+#include "TGMdiDecorFrame.h"
+#endif
+#ifndef ROOT_TG3DLine
+#include "TG3DLine.h"
+#endif
+#ifndef ROOT_TGMdiFrame
+#include "TGMdiFrame.h"
+#endif
+#ifndef ROOT_TGMdiMainFrame
+#include "TGMdiMainFrame.h"
+#endif
+#ifndef ROOT_TGuiBldHintsButton
+#include "TGuiBldHintsButton.h"
+#endif
+#ifndef ROOT_TGMdiMenu
+#include "TGMdiMenu.h"
+#endif
+#ifndef ROOT_TGListBox
+#include "TGListBox.h"
+#endif
+#ifndef ROOT_TGNumberEntry
+#include "TGNumberEntry.h"
+#endif
+#ifndef ROOT_TGScrollBar
+#include "TGScrollBar.h"
+#endif
+#ifndef ROOT_TGuiBldHintsEditor
+#include "TGuiBldHintsEditor.h"
+#endif
+#ifndef ROOT_TRootBrowser
+#include "TRootBrowser.h"
+#endif
+#ifndef ROOT_TGFrame
+#include "TGFrame.h"
+#endif
+#ifndef ROOT_TGFileDialog
+#include "TGFileDialog.h"
+#endif
+#ifndef ROOT_TGShutter
+#include "TGShutter.h"
+#endif
+#ifndef ROOT_TGButtonGroup
+#include "TGButtonGroup.h"
+#endif
+#ifndef ROOT_TGCanvas
+#include "TGCanvas.h"
+#endif
+#ifndef ROOT_TGFSContainer
+#include "TGFSContainer.h"
+#endif
+#ifndef ROOT_TGButton
+#include "TGButton.h"
+#endif
+#ifndef ROOT_TGuiBldEditor
+#include "TGuiBldEditor.h"
+#endif
+#ifndef ROOT_TGTextEdit
+#include "TGTextEdit.h"
+#endif
+#ifndef ROOT_TGFSComboBox
+#include "TGFSComboBox.h"
+#endif
+#ifndef ROOT_TGLabel
+#include "TGLabel.h"
+#endif
+#ifndef ROOT_TGView
+#include "TGView.h"
+#endif
+#ifndef ROOT_TRootGuiBuilder
+#include "TRootGuiBuilder.h"
+#endif
+#ifndef ROOT_TGTab
+#include "TGTab.h"
+#endif
+#ifndef ROOT_TGListView
+#include "TGListView.h"
+#endif
+#ifndef ROOT_TGSplitter
+#include "TGSplitter.h"
+#endif
+#ifndef ROOT_TGStatusBar
+#include "TGStatusBar.h"
+#endif
+#ifndef ROOT_TGListTree
+#include "TGListTree.h"
+#endif
+#ifndef ROOT_TGToolTip
+#include "TGToolTip.h"
+#endif
+#ifndef ROOT_TGToolBar
+#include "TGToolBar.h"
+#endif
+#ifndef ROOT_TRootEmbeddedCanvas
+#include "TRootEmbeddedCanvas.h"
+#endif
+#ifndef ROOT_TCanvas
+#include "TCanvas.h"
+#endif
+#ifndef ROOT_TGuiBldDragManager
+#include "TGuiBldDragManager.h"
+#endif
+
+#include "Riostream.h"
+#include "TApplication.h"
+#include "TROOT.h"
+#include "TSystem.h"
+#include "TGraph.h"
+#include "TH1F.h"
+#include "daq.h"
+
+TGTextButton *gTextButton[10];
+TCanvas *fCanvas;
+TGMainFrame *fMain;
+TGTextEntry *gFilename;
+TGNumberEntry *gPedestal;
+TGNumberEntry *gCh;
+TGNumberEntry *gMaxEve;
+TGNumberEntry *gNeve;
+TGTextEntry *gTimeDisplay;
+TGCheckButton *gCheckButton;
+
+
+TRootEmbeddedCanvas *gCanvas;
+#define MAXCH 32
+TH1F* gHisto[MAXCH];
+daq * gDaq;
+#define WINDOW_NAME "ADC CAEN V965"
+//----------------------------------------------------
+int UIRDimming(int state){
+ switch (state) {
+ case 0:
+ gTextButton[0]->SetEnabled(0);
+ gTextButton[1]->SetEnabled(1);
+ gTextButton[2]->SetEnabled(0);
+
+ break;
+
+ case 1:
+ gTextButton[0]->SetEnabled(0);
+ gTextButton[1]->SetEnabled(0);
+ gTextButton[2]->SetEnabled(1);
+
+ break;
+
+ case 2:
+ gTextButton[0]->SetEnabled(1);
+ gTextButton[1]->SetEnabled(1);
+ gTextButton[2]->SetEnabled(0);
+ break;
+
+ default:
+ break;
+ }
+ return 0;
+}
+
+int fDebug;
+void GetDebug(){
+ if ( gCheckButton->IsOn() ) fDebug=1;
+ else fDebug=0;
+}
+
+int GetTime(char *x){
+ int ret;
+ time_t rawtime;
+ static time_t oldtime=-1;
+ struct tm * timeinfo;
+ time ( &rawtime );
+ ret = (oldtime==rawtime);
+ timeinfo = localtime ( &rawtime );
+ sprintf(x,"%s",asctime (timeinfo));
+ int len=strlen(x);
+ if (len) x[len-1]=0;
+ return ret;
+}
+void MyTimer(){
+ char cmd[100];
+ if (!GetTime(cmd)){
+ if (gTimeDisplay) gTimeDisplay->SetText(cmd);
+ if (gCanvas){
+ gCanvas->GetCanvas()->Modified();
+ gCanvas->GetCanvas()->Update();
+ }
+ }
+}
+
+//----------------------------------------------------
+// thread function
+int gStop=0;
+#define BSIZE 10000
+unsigned long gBuf[BSIZE];
+void Run(){
+ printf("Start of Run\n" );
+
+ // odpremo datoteko za pisanje
+ int counters[10]={0,0,0,0,0, 0,0,0,0,0};
+ char names[20][20]={"CAENV 1290","CAEN V965","LC2277","LC2277","LC2277"};
+
+ char fname[128];
+ sprintf(fname,"%s.dat",gFilename->GetText());
+ FILE *fp=fopen(fname,"w");
+ int neve = (int) gMaxEve->GetNumber();
+ int hdr[4]={1};
+
+ if (gDaq) gDaq->fStop=0;
+ // zajem zeljenega kolicine podatkov
+ for (int n=0;n<neve;n++){
+ if (!gDaq) break;
+ int nb = gDaq->event(gBuf,BSIZE,counters,1);
+ if (gDaq->fStop) break;
+ // zapis v datoteko
+ hdr[1]=nb+4*sizeof(int);
+ hdr[2]=time(NULL);
+ hdr[3]=n;
+
+ fwrite(hdr, sizeof(int),4 , fp);
+ if (nb) fwrite(gBuf, 1,nb, fp);
+ // napolni histograme
+ int nint= nb/4;
+
+ int ii=0;
+
+ while (ii<nint){
+
+ int recid=gBuf[ii++];
+ int len =gBuf[ii++];
+ unsigned int dbuf= (unsigned int )&gBuf[ii];
+ if (n%1000==0) printf("%d 0x%03x Len=%d\n",n,recid,len);
+ unsigned short edge;
+
+ if (recid==0x130){
+ for (int i=0; i<len; i++) {
+ int dtype=(dbuf[i]>>25)&0x3;
+ if (dtype==0) {
+ int ch=(dbuf[i]>>17)&0xf;
+ if (2*ch<MAXCH) {
+ int rg=(dbuf[i]>>16)&0x1;
+ int adc=dbuf[i]&0xfff;
+ gHisto[2*ch+rg]->Fill(adc);
+ // printf("V965 0x%08x nev=%4d %d. [ch=%2d] range=%d data=%d \n",dbuf[i],n,i,ch,rg,adc);
+ }
+ }
+ }
+ } // if (recid==0x130)
+ ii+=len;
+ }
+ /*
+ // decode
+
+ int nint=nb/sizeof(int);
+
+ for (int i=0;i<nint;i++){
+ unsigned short tdc = gBuf[i]&0xFFFF;
+ unsigned short ch = (gBuf[i] >> 17 ) &0x1F;
+ unsigned short edge = (gBuf[i] >> 16 ) &0x1;
+ if (edge && ch < MAXCH) gHisto[ch]->Fill(tdc);
+ if (fDebug) printf("nev=%4d %d. [ch=%2d] egde=%d data=%d",n,i,ch,edge,tdc);
+ }
+ */
+ gSystem->ProcessEvents();
+ MyTimer();
+ gNeve->SetNumber(n);
+ }
+ fclose(fp);
+ UIRDimming(2);
+ printf("End of MyThread neve=%d\n",neve);
+
+}
+
+
+int save2ascii(){
+ if (!gHisto[0]) return 0;
+ char fname[128];
+ sprintf(fname,"%s.txt",gFilename->GetText());
+ FILE *fp= fopen(fname, "w");
+ fprintf(fp, "%s\n",WINDOW_NAME);
+ char cmd[128];
+ GetTime(cmd);
+ fprintf(fp, "Shranjeno: %s\n\n", cmd );
+ fprintf(fp, "Kanal hid=") ;
+ for (int j=0;j<MAXCH;j++) fprintf(fp, "%d\t",j);
+ fprintf(fp, "\n-------------------------------------------------\n");
+ for (int i=0;i<gHisto[0]->GetNbinsX();i++){
+ fprintf(fp, "%d\t",i);
+ for (int j=0;j<MAXCH;j++) fprintf(fp, "%d\t",(int) gHisto[j]->GetBinContent(i+1));
+ fprintf(fp, "\n");
+ }
+ fclose(fp);
+ printf("Histogram content is dumped to the file %s\n",fname);
+ return 0;
+ }
+
+void MyEventHandler(int i){
+
+ UIRDimming(i);
+
+ switch (i) {
+ case 0: // Init
+ gDaq->fPedestal = (int)(gPedestal->GetNumber());
+ gDaq->init();
+ break;
+ case 1: // Start
+ Run();
+ case 2: // Stop
+ gDaq->fStop=1;
+ case 3: // ReDraw
+ gCanvas->GetCanvas()->Modified();
+ gCanvas->GetCanvas()->Update();
+ break;
+ case 4: // Clear
+ for (int j=0;j<MAXCH;j++) if (gHisto[j]) gHisto[j]->Reset();
+ break;
+ case 5: // Save
+ save2ascii();
+ break;
+ case 6: // Print
+ gCanvas->GetCanvas()->SaveAs("zivljenjski_cas_mionov.pdf");
+ break;
+ case 7: // exit
+ gApplication->Terminate(0);
+ break;
+ }
+
+}
+
+int Redraw(long val=0){
+ unsigned int ch= (unsigned int)(gCh->GetNumber());
+ if (ch<MAXCH && gHisto[ch]) {
+ gCanvas->GetCanvas()->cd();
+ gHisto[ch]->Draw();
+ gCanvas->GetCanvas()->Modified();
+ gCanvas->GetCanvas()->Update();
+ } else {
+ if (gCh->GetNumber()>=MAXCH) gCh->SetNumber(MAXCH-1);
+ if (gCh->GetNumber()< 0) gCh->SetNumber(0);
+ }
+ return 0;
+}
+//----------------------------------------------------
+
+int gui(){
+
+ for (int i=0;i<MAXCH;i++){
+ char hname[50];
+ sprintf(hname,"Ch. %d Rg.%d;ADC;N",i/2,i%2);
+ char hn[50];
+ sprintf(hn,"ch%d",i);
+ gHisto[i] = new TH1F(hn,hname,4096,-0.5,4095.5);
+ }
+ gDaq= new daq();
+ fMain = new TGMainFrame(0,800,800);
+ TGHorizontalFrame *fH=new TGHorizontalFrame(fMain,800,400);
+ //------------------------------------------------------------
+ TGLayoutHints *f0= new TGLayoutHints(kLHintsLeft \| kLHintsTop,2,2,2,2);
+ TGLayoutHints *layout2= new TGLayoutHints(kLHintsLeft \| kLHintsTop,20,20,20,20);
+ // gumbi
+
+ int nbut=8;
+ const char *names[10]={"Init","Start","Stop","Refresh","Clear","Save", "Print" , "Exit"};
+ for (int i=0;i<nbut;i++){
+
+ gTextButton[i]= new TGTextButton(fH, names[i]);
+ gTextButton[i]->SetTextJustify(36);
+ gTextButton[i]->SetMargins(0,0,0,0);
+ gTextButton[i]->SetWrapLength(-1);
+ gTextButton[i]->Resize(50,22);
+ fH->AddFrame(gTextButton[i], layout2);
+ char cmd[50];
+ sprintf(cmd,"MyEventHandler(=%d)",i);
+ TQObject::Connect(gTextButton[i],"Clicked()",0,0,cmd);
+ }
+
+ gCheckButton = new TGCheckButton( fH,"Debug");
+ gCheckButton->Resize(50,22);
+ TQObject::Connect(gCheckButton,"Clicked()", 0, 0 , "GetDebug()");
+ gCheckButton->SetState(kButtonDown);
+ fH->AddFrame(gCheckButton, f0);
+
+ fMain->AddFrame(fH , f0);
+ //---------------------------------------------------------
+ // ura
+ TGLabel *lab1;
+ fH=new TGHorizontalFrame(fMain,800,200);
+ lab1 = new TGLabel( fH ,"Time:");
+ fH->AddFrame(lab1, f0);
+ gTimeDisplay = new TGTextEntry( fH,"");
+ gTimeDisplay->Resize(200,22);
+ fH->AddFrame(gTimeDisplay, f0);
+ fMain->AddFrame(fH , f0);
+ //---------------------------------------------------------
+ // inputi
+ fH=new TGHorizontalFrame(fMain,800,200);
+ lab1 = new TGLabel( fH ,"Filename:");
+ fH->AddFrame(lab1, f0);
+ gFilename = new TGTextEntry( fH,"filename");
+ gFilename->Resize(200,22);
+ fH->AddFrame(gFilename, f0);
+ fMain->AddFrame(fH , f0);
+ //---------------------------------------------------------
+ fH=new TGHorizontalFrame(fMain,800,200);
+ lab1 = new TGLabel( fH ,"ADC Pedestal:");
+ fH->AddFrame(lab1, f0);
+ gPedestal = new TGNumberEntry( fH,100);
+ gPedestal->Resize(100,22);
+ fH->AddFrame(gPedestal, f0);
+ fMain->AddFrame(fH , f0);
+ //---------------------------------------------------------
+ fH=new TGHorizontalFrame(fMain,800,200);
+ lab1 = new TGLabel( fH ,"N of events to acquire:");
+ fH->AddFrame(lab1, f0);
+ gMaxEve = new TGNumberEntry( fH,10000);
+ gMaxEve->Resize(100,22);
+ fH->AddFrame(gMaxEve, f0);
+ fMain->AddFrame(fH , f0);
+ //---------------------------------------------------------
+ fH=new TGHorizontalFrame(fMain,800,200);
+ lab1 = new TGLabel( fH ,"Number of events:");
+ fH->AddFrame(lab1, f0);
+ gNeve = new TGNumberEntry( fH,0);
+ gNeve->Resize(100,22);
+ fH->AddFrame(gNeve, f0);
+ fMain->AddFrame(fH , f0);
+ //---------------------------------------------------------
+ // canvas
+ fH=new TGHorizontalFrame(fMain,800,200);
+ gCanvas = new TRootEmbeddedCanvas ("gCanvas",fH,800,400);
+ fH->AddFrame(gCanvas, f0);
+ fMain->AddFrame(fH , f0);
+ //------------------------------------------------------------
+ fH=new TGHorizontalFrame(fMain,800,200);
+ lab1 = new TGLabel( fH ,"Channel number (0..31):");
+ fH->AddFrame(lab1, f0);
+ gCh = new TGNumberEntry( fH,0);
+ fH->AddFrame(gCh, f0);
+ TQObject::Connect(gCh,"ValueSet(Long_t)",0,0,"Redraw(Long_t )");
+
+ fMain->AddFrame(fH , f0);
+ //------------------------------------------------------------
+ fMain->SetWindowName(WINDOW_NAME);
+ fMain->MapSubwindows();
+ fMain->Resize(fMain->GetDefaultSize());
+ fMain->MapWindow();
+ Redraw();
+ GetDebug();
+ return 0;
+}
Index: praktikum/petdaqfmf/VmUsbStack.h
===================================================================
--- praktikum/petdaqfmf/VmUsbStack.h (nonexistent)
+++ praktikum/petdaqfmf/VmUsbStack.h (revision 112)
@@ -0,0 +1,45 @@
+#ifndef VMUSBSTACK_H
+#define VMUSBSTACK_H
+#define CMD_WRITE 0x000
+#define CMD_READ 0x100
+#define CMD_A24 0x039
+#define CMD_A32 0x009
+#define CMD_HM 0x80000
+#define CMD_HD 0x20000
+#define CMD_MRK 0x2000
+#define CMD_DLY 0x8000
+#define CMD_BLT 0xFF000000
+
+#define CMD_D16 1
+#define CMD_D32 0
+
+#include <vector>
+class VmUsbStack {
+ public:
+ VmUsbStack();
+ ~VmUsbStack();
+ std::vector<int> fStack;
+ void Append(int cmd, int marker);
+ void Append(int cmd, int addr, int data);
+
+ void Marker(int marker);
+ void WriteA32D16(int addr, int data);
+ void ReadA32D16(int addr );
+ void WriteA32D32(int addr, int data);
+ void ReadA32D32(int addr );
+
+ void WriteA24D16(int addr, int data);
+ void ReadA24D16(int addr );
+ void WriteA24D32(int addr, int data);
+ void ReadA24D32(int addr );
+
+ void ConditionalRead(int am ,int d16d32,int addr, int data);
+ void RepeatRead(int addr_modifier,int d16d32, int baseaddr, int n, int increment);
+ void RepeatWrite(int addr_modifier,int d16d32, int baseaddr, int n, int increment, int data);
+
+ int Get(int maxn, int *stack);
+ void Print();
+};
+
+
+#endif
Index: praktikum/petdaqfmf/Dict.h
===================================================================
--- praktikum/petdaqfmf/Dict.h (nonexistent)
+++ praktikum/petdaqfmf/Dict.h (revision 112)
@@ -0,0 +1,44 @@
+/********************************************************************
+* Dict.h
+* CAUTION: DON'T CHANGE THIS FILE. THIS FILE IS AUTOMATICALLY GENERATED
+* FROM HEADER FILES LISTED IN G__setup_cpp_environmentXXX().
+* CHANGE THOSE HEADER FILES AND REGENERATE THIS FILE.
+********************************************************************/
+#ifdef __CINT__
+#error Dict.h/C is only for compilation. Abort cint.
+#endif
+#include <stddef.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <math.h>
+#include <string.h>
+#define G__ANSIHEADER
+#define G__DICTIONARY
+#include "G__ci.h"
+extern "C" {
+extern void G__cpp_setup_tagtableDict();
+extern void G__cpp_setup_inheritanceDict();
+extern void G__cpp_setup_typetableDict();
+extern void G__cpp_setup_memvarDict();
+extern void G__cpp_setup_globalDict();
+extern void G__cpp_setup_memfuncDict();
+extern void G__cpp_setup_funcDict();
+extern void G__set_cpp_environmentDict();
+}
+
+
+#include "TObject.h"
+#include "TMemberInspector.h"
+#include "daq.h"
+#include <algorithm>
+namespace std { }
+using namespace std;
+
+#ifndef G__MEMFUNCBODY
+#endif
+
+extern G__linked_taginfo G__DictLN_vectorlEintcOallocatorlEintgRsPgR;
+extern G__linked_taginfo G__DictLN_VmUsbStack;
+extern G__linked_taginfo G__DictLN_daq;
+
+/* STUB derived class for protected member access */
Index: praktikum/petdaqfmf/vme.h
===================================================================
--- praktikum/petdaqfmf/vme.h (nonexistent)
+++ praktikum/petdaqfmf/vme.h (revision 112)
@@ -0,0 +1,6 @@
+#ifndef _VME_H_
+#define _VME_H_
+
+#define _VI_FUNC
+#include "wienvme_dll.h"
+#endif
Index: praktikum/petdaqfmf/Makefile
===================================================================
--- praktikum/petdaqfmf/Makefile (nonexistent)
+++ praktikum/petdaqfmf/Makefile (revision 112)
@@ -0,0 +1,78 @@
+
+ROOTINC=$(shell root-config --incdir )
+ROOTLIB=$(shell root-config --libs )
+
+
+INC=-I. -I$(ROOTINC)
+
+
+LIBS=$(ROOTLIB) -L./ -lm
+LIBS1=$(shell root-config --libs --glibs )
+
+
+
+SRC = .
+INC1 = -I. -I../lib -I/usr/include
+DBG =
+CFLAGS = $(DBG) $(INC1) -Wall
+
+
+TARGET1 = daq
+
+FILES1 = $(SRC)/daq.C
+
+VMELIB = libf9vme.a
+
+SHLIB = $(VMELIB) -lusb -lz
+
+OBJ_FILES = VMEModule.o CAENV965.o libxxusb.o wienvmeusb_dll.o VmUsbStack.o
+
+all: vme $(TARGET1)
+
+libxxusb.o: libxxusb.cpp libxxusb.h
+
+
+
+.cpp.o:
+ $(CXX) -c -g $<
+ ar r $(VMELIB) $@
+
+.C.o:
+ $(CXX) -c -g $<
+ ar r $(VMELIB) $@
+
+
+.cc.o:
+ $(CXX) -c -g $<
+ ar r $(VMELIB) $@
+
+.c.o:
+ $(CXX) -c -g $<
+ ar r $(VMELIB) $@
+
+vme: $(OBJ_FILES)
+
+wienvme_dll.o: wienvme_dll.c
+
+
+
+VMEModule.o: VMEModule.hh VMEModule.cc
+
+CAENV965.o: CAENV965.h CAENV965_DEF.h CAENV965.c
+
+
+$(TARGET1): $(FILES1) vme
+ $(CXX) -DMAIN $(FILES1) $(CFLAGS) -o $(TARGET1) $(SHLIB) -lstdc++
+
+
+libdaq.so: $(FILES1)
+ @echo "Generating dictionary Dict.C..."
+ rootcint -f Dict.C -c $(INC) $(CPPFLAGS) daq.h LinkDef.h
+ $(CXX) -DG__DICTIONARY $(CPPFLAGS) $(INC) -fPIC -g -Wall $(FILES1) Dict.C -L. $(SHLIB) -shared -o libdaq.so
+
+clean:
+ rm Dict.C libdaq.so $(TARGET1)
+
+
+tgz:
+ tar czvf vme.tgz Makefile .c .h .C .cc *.hh

Subversion Repositories f9daq

Compare Revisions

Ignore whitespace Rev 111 → Rev 112