/drivers/standa/2019-10/ximc-4.1.13-hw2.3.x.cod |
Cannot display: file marked as a binary type.
|
svn:mime-type = application/octet-stream |
Property changes: |
Deleted: svn:mime-type |
## -1 +0,0 ## |
-application/octet-stream |
\ No newline at end of property |
Index: standa/2019-10/ximc-3.9.20-hw2.2.x.cod |
=================================================================== |
Cannot display: file marked as a binary type. |
svn:mime-type = application/octet-stream |
/standa/2019-10/ximc-3.9.20-hw2.2.x.cod |
Property changes: |
Deleted: svn:mime-type |
## -1 +0,0 ## |
-application/octet-stream |
\ No newline at end of property |
Index: standa/2019-10/8SMC4-USB_User_manual_Eng.pdf |
=================================================================== |
Cannot display: file marked as a binary type. |
svn:mime-type = application/octet-stream |
/standa/2019-10/8SMC4-USB_User_manual_Eng.pdf |
Property changes: |
Deleted: svn:mime-type |
## -1 +0,0 ## |
-application/octet-stream |
\ No newline at end of property |
Index: standa/2019-10/microsmc-2.3.0-win32_win64.zip |
=================================================================== |
Cannot display: file marked as a binary type. |
svn:mime-type = application/octet-stream |
/standa/2019-10/microsmc-2.3.0-win32_win64.zip |
Property changes: |
Deleted: svn:mime-type |
## -1 +0,0 ## |
-application/octet-stream |
\ No newline at end of property |
Index: standa/2019-10/8SMC4-8SMC5-USB_Programming_manual_Eng.pdf |
=================================================================== |
Cannot display: file marked as a binary type. |
svn:mime-type = application/octet-stream |
/standa/2019-10/8SMC4-8SMC5-USB_Programming_manual_Eng.pdf |
Property changes: |
Deleted: svn:mime-type |
## -1 +0,0 ## |
-application/octet-stream |
\ No newline at end of property |
Index: standa/2019-10/libximc-2.10.5-all.tar.gz |
=================================================================== |
Cannot display: file marked as a binary type. |
svn:mime-type = application/octet-stream |
/standa/2019-10/libximc-2.10.5-all.tar.gz |
Property changes: |
Deleted: svn:mime-type |
## -1 +0,0 ## |
-application/octet-stream |
\ No newline at end of property |
Index: standa/2019-10/8SMC5-USB_User_manual_Eng.pdf |
=================================================================== |
Cannot display: file marked as a binary type. |
svn:mime-type = application/octet-stream |
/standa/2019-10/8SMC5-USB_User_manual_Eng.pdf |
Property changes: |
Deleted: svn:mime-type |
## -1 +0,0 ## |
-application/octet-stream |
\ No newline at end of property |
Index: standa/2019-10/8MT175-50.cfg |
=================================================================== |
--- standa/2019-10/8MT175-50.cfg (revision 338) |
+++ standa/2019-10/8MT175-50.cfg (nonexistent) |
@@ -1,514 +0,0 @@ |
-[User_units] |
-Enable=false |
-Step_multiplier=400 |
-Unit_multiplier=1 |
-Precision=3 |
-Unit=mm |
- |
-[TypeSkin] |
-TypeSkin=GeneralMotor |
- |
-[GeneralMotor_setup] |
-Left_point=-626 |
-Right_point=19374 |
-LoadFromDevice_enable=false |
-WatchOverLimits_enable=true |
-ShowSecondaryPosition_enable=true |
- |
-[Cyclic] |
-Left_point=0 |
-Right_point=1000 |
-Cyclic_type=ptp_fine |
- |
-[Log_setup] |
-Xilab_loglevel=3 |
-script_loglevel=3 |
-library_loglevel=3 |
-Autosave_enabled=false |
-Autosave_path=. |
- |
-[Graph_common_setup] |
-Datapoints=60 |
-Update_interval=100 |
-dataUpdate_enable=false |
-Autostart_on_open=true |
- |
-[Graph_position_setup] |
-Line_width=1 |
-Line_color=#000000 |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=1000000 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_speed_setup] |
-Line_width=1 |
-Line_color=#0000ff |
-Line_style=0 |
-Scale_min=-8000 |
-Scale_max=8000 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_encoder_setup] |
-Line_width=1 |
-Line_color=#000000 |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=0 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_flags_setup] |
-Line_width=2 |
-Line_color=#9500ff |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=0 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_envoltage_setup] |
-Line_width=1 |
-Line_color=#996633 |
-Line_style=0 |
-Scale_min=-12 |
-Scale_max=12 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_encurrent_setup] |
-Line_width=1 |
-Line_color=#ff0000 |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=1000 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_pwrvoltage_setup] |
-Line_width=1 |
-Line_color=#00ffff |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=0 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_pwrcurrent_setup] |
-Line_width=1 |
-Line_color=#ffff00 |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=0 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_usbvoltage_setup] |
-Line_width=1 |
-Line_color=#00ff00 |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=0 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_usbcurrent_setup] |
-Line_width=1 |
-Line_color=#0000ff |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=0 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_voltageA_setup] |
-Line_width=1 |
-Line_color=#ff00ff |
-Line_style=0 |
-Scale_min=-12 |
-Scale_max=12 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_voltageB_setup] |
-Line_width=1 |
-Line_color=#ff8000 |
-Line_style=0 |
-Scale_min=-12 |
-Scale_max=12 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_voltageC_setup] |
-Line_width=1 |
-Line_color=#800080 |
-Line_style=0 |
-Scale_min=-12 |
-Scale_max=12 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_currentA_setup] |
-Line_width=1 |
-Line_color=#996633 |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=1000 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_currentB_setup] |
-Line_width=1 |
-Line_color=#00ffff |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=1000 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_currentC_setup] |
-Line_width=1 |
-Line_color=#00ff00 |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=1000 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_pwm_setup] |
-Line_width=1 |
-Line_color=#ff00ff |
-Line_style=0 |
-Scale_min=-100 |
-Scale_max=100 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_temperature_setup] |
-Line_width=1 |
-Line_color=#ff8000 |
-Line_style=0 |
-Scale_min=15 |
-Scale_max=30 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_joy_setup] |
-Line_width=1 |
-Line_color=#ff0000 |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=10000 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_pot_setup] |
-Line_width=1 |
-Line_color=#ffff00 |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=10000 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Attenuator_setup] |
-number_of_wheels=One |
-Wheel_1Transmittance_1=0 |
-Wheel_1Transmittance_2=0 |
-Wheel_1Transmittance_3=0 |
-Wheel_1Transmittance_4=0 |
-Wheel_1Transmittance_5=0 |
-Wheel_1Transmittance_6=0 |
-Wheel_1Transmittance_7=0 |
-Wheel_1Transmittance_8=0 |
-Wheel_2Transmittance_9=0 |
-Wheel_2Transmittance_10=0 |
-Wheel_2Transmittance_11=0 |
-Wheel_2Transmittance_12=0 |
-Wheel_2Transmittance_13=0 |
-Wheel_2Transmittance_14=0 |
-Wheel_2Transmittance_15=0 |
-Wheel_2Transmittance_16=0 |
- |
-[Borders] |
-Border_is_encoder=false |
-Left_border=-126 |
-Left_border_usteps=0 |
-Right_border=18874 |
-Right_border_usteps=0 |
-Stop_at_left_border=true |
-Stop_at_right_border=true |
-Borders_swap_misset_detection=false |
-Limit_switch_1_pushed_is_closed=true |
-Limit_switch_2_pushed_is_closed=true |
-Limit_switch_ender_swap=true |
- |
-[Maximum_ratings] |
-Low_voltage_protection=false |
-Low_voltage_off=800 |
-Critical_current=4000 |
-Critical_voltage=5000 |
-Critical_usb_current=450 |
-Critical_usb_voltage=520 |
-Minimum_usb_voltage=420 |
-Critical_temperature=800 |
-Shutdown_on_overheat=true |
-H_bridge_alert=true |
-Alarm_on_borders_swap_misset=true |
-Alarm_flags_sticking=true |
-Usb_break_reconnect=false |
- |
-[Motor_type] |
-type=STEP |
- |
-[Driver_type] |
-type=INTEGRATE |
- |
-[Engine] |
-Max_voltage_enable=false |
-Max_current_enable=false |
-Limit_speed_enable=true |
-Play_compensation_enable=false |
-Rated_voltage=360 |
-Rated_current=1200 |
-Max_speed_steps=4000 |
-Max_speed_usteps=0 |
-Play_compensation=575 |
-Reverse_enable=true |
-Use_max_speed=false |
-Acceleration_enable=true |
-Current_as_RMS_enable=false |
-Steps_per_turn=200 |
-Microstep_mode=9 |
-Speed_steps=1000 |
-Speed_usteps=0 |
-Antiplay_speed_steps=1000 |
-Antiplay_speed_usteps=0 |
-Acceleration=2000 |
-Deceleration=4000 |
-Feedback_type=NONE |
-Encoder_CPT=4000 |
-Encoder_reverse=false |
-Feedback_enc_type=AUTO |
- |
-[Home_position] |
-1st_move_direction_right=false |
-1st_move_speed=500 |
-1st_move_speed_usteps=0 |
-2nd_move_direction_right=true |
-2nd_move_speed=500 |
-2nd_move_speed_usteps=0 |
-standoff=626 |
-standoff_usteps=200 |
-use_second_phase=false |
-use_half_movement=false |
-use_fast_home=true |
-first_stop_after=LIM |
-second_stop_after=REV |
- |
-[PID_control] |
-Voltage_Kp=0 |
-Voltage_Ki=0 |
-Voltage_Kd=0 |
-Voltage_Kp_float=0 |
-Voltage_Ki_float=0 |
-Voltage_Kd_float=0 |
- |
-[TTL_sync] |
-Clutter_time=4 |
-Position=0 |
-uPosition=0 |
-Speed=0 |
-uSpeed=0 |
-Syncin_enabled=false |
-Syncin_invert=false |
-Syncin_gotoposition=false |
-Syncout_enabled=false |
-Syncout_fixed_is_high=false |
-Syncout_invert=false |
-Syncout_count_in_steps=false |
-Syncout_onstart_enabled=true |
-Syncout_onstop_enabled=true |
-Syncout_onperiod_enabled=false |
-Syncout_pulse_steps=100 |
-Syncout_period=2000 |
-Accuracy=0 |
-uAccuracy=0 |
- |
-[Uart] |
-Speed=115200 |
-Use_parity=false |
-Parity_type=EVEN |
-One_stop_bit=false |
- |
-[Extio] |
-Extio_as_output=true |
-Extio_invert=false |
-Mode_in=IN_STOP |
-Mode_out=OUT_OFF |
- |
-[Power] |
-Hold_current=50 |
-Current_reduction_delay=1000 |
-Power_off_delay=60 |
-Current_set_time=300 |
-Current_reduction_enabled=true |
-Power_off_enabled=true |
-Smooth_current_enabled=true |
- |
-[Brake] |
-Brake_enabled=false |
-Power_off_enabled=true |
-t1=300 |
-t2=500 |
-t3=300 |
-t4=400 |
- |
-[Control] |
-Joy_low_end=0 |
-Joy_center=5000 |
-Joy_high_end=10000 |
-Exp_factor=100 |
-Dead_zone=50 |
-Joystick_reverse=false |
-timeout_1=1000 |
-timeout_2=1000 |
-timeout_3=1000 |
-timeout_4=1000 |
-timeout_5=1000 |
-timeout_6=1000 |
-timeout_7=1000 |
-timeout_8=1000 |
-timeout_9=1000 |
-speed_1_steps=100 |
-speed_1_usteps=0 |
-speed_2_steps=1000 |
-speed_2_usteps=0 |
-speed_3_steps=0 |
-speed_3_usteps=0 |
-speed_4_steps=0 |
-speed_4_usteps=0 |
-speed_5_steps=0 |
-speed_5_usteps=0 |
-speed_6_steps=0 |
-speed_6_usteps=0 |
-speed_7_steps=0 |
-speed_7_usteps=0 |
-speed_8_steps=0 |
-speed_8_usteps=0 |
-speed_9_steps=0 |
-speed_9_usteps=0 |
-speed_10_steps=0 |
-speed_10_usteps=0 |
-control_mode=LR |
-left_button_pushed=false |
-right_button_pushed=false |
-MaxClickTime=300 |
-DeltaPosition=1 |
-uDeltaPosition=0 |
- |
-[Control_position] |
-Position_control_enabled=false |
-Alarm_on_error_enabled=false |
-Error_correction_enabled=true |
-Rev_sens_inv_enabled=false |
-Based_on_rev_sens=false |
-Min_error=3 |
- |
-[Controller_name] |
-EEPROM_precedence=false |
- |
-[Stage] |
-Positioner_name= |
-Manufacturer=Standa |
-Part_number=8MT175-50 |
-Lead_screw_pitch=0.5 |
-Units=mm |
-Max_speed=10 |
-Travel_range=50 |
-Supply_voltage_min=12 |
-Supply_voltage_max=36 |
-Max_current_consumption=0 |
-Horizontal_load_capacity=8 |
-Vertical_load_capacity=3 |
- |
-[StageMotor] |
-Manufacturer=Motion Control P |
-Part_number=FL42STH47-1204B |
-Type=STEP |
-Poles=0 |
-Phases=0 |
-Nominal_voltage=3.84 |
-Nominal_current=1.2 |
-Nominal_speed=0 |
-Nominal_torque=0.45 |
-Nominal_power=0 |
-Winding_resistance=3.2 |
-Winding_inductance=6 |
-Rotor_inertia=82 |
-Stall_torque=0 |
-Detent_torque=0 |
-Torque_constant=0 |
-Speed_constant=0 |
-Speed_torque_gradient=0 |
-Mechanical_time_constant=0 |
-Max_speed=5000 |
-Max_current=0 |
-Max_current_time=0 |
-No_load_current=0 |
-No_load_speed=0 |
- |
-[StageEncoder] |
-Manufacturer= |
-Part_number= |
-Max_operating_frequency=0 |
-Max_current_consumption=0 |
-Supply_voltage_min=0 |
-Supply_voltage_max=0 |
-Pulses_per_revolution=1000 |
-Differential_output=false |
-Pushpull_output=false |
-Index_channel_present=false |
-Revolution_sensor_present=false |
-Revolution_sensor_active_high=false |
- |
-[StageHallsensor] |
-Manufacturer= |
-Part_number= |
-Max_operating_frequency=0 |
-Max_current_consumption=0 |
-Supply_voltage_min=0 |
-Supply_voltage_max=0 |
-Pulses_per_revolution=0 |
- |
-[StageGear] |
-Manufacturer= |
-Part_number= |
-Reduction_in=1 |
-Reduction_out=1 |
-Rated_input_speed=0 |
-Rated_input_torque=0 |
-Max_output_backlash=0 |
-Input_inertia=0 |
-Efficiency=0 |
- |
-[StageAccessories] |
-Magnetic_brake_info= |
-MB_rated_voltage=0 |
-MB_rated_current=0 |
-MB_torque=0 |
-MB_available=false |
-MB_powered_hold=false |
-Temperature_sensor_info= |
-TS_min=0 |
-TS_max=0 |
-TS_grad=0 |
-TS_type=THERMOCOUPLE |
-TS_available=false |
-LS_on_sw1_available=false |
-LS_on_sw2_available=false |
-LS_sw1_active_low=false |
-LS_sw2_active_low=false |
-LS_shorted=false |
Index: standa/2019-10/8MT175-150.cfg |
=================================================================== |
--- standa/2019-10/8MT175-150.cfg (revision 338) |
+++ standa/2019-10/8MT175-150.cfg (nonexistent) |
@@ -1,514 +0,0 @@ |
-[User_units] |
-Enable=false |
-Step_multiplier=400 |
-Unit_multiplier=1 |
-Precision=3 |
-Unit=mm |
- |
-[TypeSkin] |
-TypeSkin=GeneralMotor |
- |
-[GeneralMotor_setup] |
-Left_point=-626 |
-Right_point=59374 |
-LoadFromDevice_enable=false |
-WatchOverLimits_enable=true |
-ShowSecondaryPosition_enable=true |
- |
-[Cyclic] |
-Left_point=0 |
-Right_point=1000 |
-Cyclic_type=ptp_fine |
- |
-[Log_setup] |
-Xilab_loglevel=3 |
-script_loglevel=3 |
-library_loglevel=3 |
-Autosave_enabled=false |
-Autosave_path=. |
- |
-[Graph_common_setup] |
-Datapoints=60 |
-Update_interval=100 |
-dataUpdate_enable=false |
-Autostart_on_open=true |
- |
-[Graph_position_setup] |
-Line_width=1 |
-Line_color=#000000 |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=1000000 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_speed_setup] |
-Line_width=1 |
-Line_color=#0000ff |
-Line_style=0 |
-Scale_min=-8000 |
-Scale_max=8000 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_encoder_setup] |
-Line_width=1 |
-Line_color=#000000 |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=0 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_flags_setup] |
-Line_width=2 |
-Line_color=#9500ff |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=0 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_envoltage_setup] |
-Line_width=1 |
-Line_color=#996633 |
-Line_style=0 |
-Scale_min=-12 |
-Scale_max=12 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_encurrent_setup] |
-Line_width=1 |
-Line_color=#ff0000 |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=1000 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_pwrvoltage_setup] |
-Line_width=1 |
-Line_color=#00ffff |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=0 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_pwrcurrent_setup] |
-Line_width=1 |
-Line_color=#ffff00 |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=0 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_usbvoltage_setup] |
-Line_width=1 |
-Line_color=#00ff00 |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=0 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_usbcurrent_setup] |
-Line_width=1 |
-Line_color=#0000ff |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=0 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_voltageA_setup] |
-Line_width=1 |
-Line_color=#ff00ff |
-Line_style=0 |
-Scale_min=-12 |
-Scale_max=12 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_voltageB_setup] |
-Line_width=1 |
-Line_color=#ff8000 |
-Line_style=0 |
-Scale_min=-12 |
-Scale_max=12 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_voltageC_setup] |
-Line_width=1 |
-Line_color=#800080 |
-Line_style=0 |
-Scale_min=-12 |
-Scale_max=12 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_currentA_setup] |
-Line_width=1 |
-Line_color=#996633 |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=1000 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_currentB_setup] |
-Line_width=1 |
-Line_color=#00ffff |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=1000 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_currentC_setup] |
-Line_width=1 |
-Line_color=#00ff00 |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=1000 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_pwm_setup] |
-Line_width=1 |
-Line_color=#ff00ff |
-Line_style=0 |
-Scale_min=-100 |
-Scale_max=100 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_temperature_setup] |
-Line_width=1 |
-Line_color=#ff8000 |
-Line_style=0 |
-Scale_min=15 |
-Scale_max=30 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_joy_setup] |
-Line_width=1 |
-Line_color=#ff0000 |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=10000 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Graph_pot_setup] |
-Line_width=1 |
-Line_color=#ffff00 |
-Line_style=0 |
-Scale_min=0 |
-Scale_max=10000 |
-Autoscale_enable=true |
-Antialiasing_enable=false |
- |
-[Attenuator_setup] |
-number_of_wheels=One |
-Wheel_1Transmittance_1=0 |
-Wheel_1Transmittance_2=0 |
-Wheel_1Transmittance_3=0 |
-Wheel_1Transmittance_4=0 |
-Wheel_1Transmittance_5=0 |
-Wheel_1Transmittance_6=0 |
-Wheel_1Transmittance_7=0 |
-Wheel_1Transmittance_8=0 |
-Wheel_2Transmittance_9=0 |
-Wheel_2Transmittance_10=0 |
-Wheel_2Transmittance_11=0 |
-Wheel_2Transmittance_12=0 |
-Wheel_2Transmittance_13=0 |
-Wheel_2Transmittance_14=0 |
-Wheel_2Transmittance_15=0 |
-Wheel_2Transmittance_16=0 |
- |
-[Borders] |
-Border_is_encoder=false |
-Left_border=874 |
-Left_border_usteps=0 |
-Right_border=57874 |
-Right_border_usteps=0 |
-Stop_at_left_border=true |
-Stop_at_right_border=true |
-Borders_swap_misset_detection=false |
-Limit_switch_1_pushed_is_closed=true |
-Limit_switch_2_pushed_is_closed=true |
-Limit_switch_ender_swap=true |
- |
-[Maximum_ratings] |
-Low_voltage_protection=false |
-Low_voltage_off=800 |
-Critical_current=4000 |
-Critical_voltage=5000 |
-Critical_usb_current=450 |
-Critical_usb_voltage=520 |
-Minimum_usb_voltage=420 |
-Critical_temperature=800 |
-Shutdown_on_overheat=true |
-H_bridge_alert=true |
-Alarm_on_borders_swap_misset=true |
-Alarm_flags_sticking=true |
-Usb_break_reconnect=false |
- |
-[Motor_type] |
-type=STEP |
- |
-[Driver_type] |
-type=INTEGRATE |
- |
-[Engine] |
-Max_voltage_enable=false |
-Max_current_enable=false |
-Limit_speed_enable=true |
-Play_compensation_enable=false |
-Rated_voltage=360 |
-Rated_current=1200 |
-Max_speed_steps=4000 |
-Max_speed_usteps=0 |
-Play_compensation=575 |
-Reverse_enable=true |
-Use_max_speed=false |
-Acceleration_enable=true |
-Current_as_RMS_enable=false |
-Steps_per_turn=200 |
-Microstep_mode=9 |
-Speed_steps=1000 |
-Speed_usteps=0 |
-Antiplay_speed_steps=1000 |
-Antiplay_speed_usteps=0 |
-Acceleration=2000 |
-Deceleration=4000 |
-Feedback_type=NONE |
-Encoder_CPT=4000 |
-Encoder_reverse=false |
-Feedback_enc_type=AUTO |
- |
-[Home_position] |
-1st_move_direction_right=false |
-1st_move_speed=500 |
-1st_move_speed_usteps=0 |
-2nd_move_direction_right=true |
-2nd_move_speed=500 |
-2nd_move_speed_usteps=0 |
-standoff=626 |
-standoff_usteps=200 |
-use_second_phase=false |
-use_half_movement=false |
-use_fast_home=true |
-first_stop_after=LIM |
-second_stop_after=REV |
- |
-[PID_control] |
-Voltage_Kp=0 |
-Voltage_Ki=0 |
-Voltage_Kd=0 |
-Voltage_Kp_float=0 |
-Voltage_Ki_float=0 |
-Voltage_Kd_float=0 |
- |
-[TTL_sync] |
-Clutter_time=4 |
-Position=0 |
-uPosition=0 |
-Speed=0 |
-uSpeed=0 |
-Syncin_enabled=false |
-Syncin_invert=false |
-Syncin_gotoposition=false |
-Syncout_enabled=false |
-Syncout_fixed_is_high=false |
-Syncout_invert=false |
-Syncout_count_in_steps=false |
-Syncout_onstart_enabled=true |
-Syncout_onstop_enabled=true |
-Syncout_onperiod_enabled=false |
-Syncout_pulse_steps=100 |
-Syncout_period=2000 |
-Accuracy=0 |
-uAccuracy=0 |
- |
-[Uart] |
-Speed=115200 |
-Use_parity=false |
-Parity_type=EVEN |
-One_stop_bit=false |
- |
-[Extio] |
-Extio_as_output=true |
-Extio_invert=false |
-Mode_in=IN_STOP |
-Mode_out=OUT_OFF |
- |
-[Power] |
-Hold_current=50 |
-Current_reduction_delay=1000 |
-Power_off_delay=60 |
-Current_set_time=300 |
-Current_reduction_enabled=true |
-Power_off_enabled=true |
-Smooth_current_enabled=true |
- |
-[Brake] |
-Brake_enabled=false |
-Power_off_enabled=true |
-t1=300 |
-t2=500 |
-t3=300 |
-t4=400 |
- |
-[Control] |
-Joy_low_end=0 |
-Joy_center=5000 |
-Joy_high_end=10000 |
-Exp_factor=100 |
-Dead_zone=50 |
-Joystick_reverse=false |
-timeout_1=1000 |
-timeout_2=1000 |
-timeout_3=1000 |
-timeout_4=1000 |
-timeout_5=1000 |
-timeout_6=1000 |
-timeout_7=1000 |
-timeout_8=1000 |
-timeout_9=1000 |
-speed_1_steps=100 |
-speed_1_usteps=0 |
-speed_2_steps=1000 |
-speed_2_usteps=0 |
-speed_3_steps=0 |
-speed_3_usteps=0 |
-speed_4_steps=0 |
-speed_4_usteps=0 |
-speed_5_steps=0 |
-speed_5_usteps=0 |
-speed_6_steps=0 |
-speed_6_usteps=0 |
-speed_7_steps=0 |
-speed_7_usteps=0 |
-speed_8_steps=0 |
-speed_8_usteps=0 |
-speed_9_steps=0 |
-speed_9_usteps=0 |
-speed_10_steps=0 |
-speed_10_usteps=0 |
-control_mode=LR |
-left_button_pushed=false |
-right_button_pushed=false |
-MaxClickTime=300 |
-DeltaPosition=1 |
-uDeltaPosition=0 |
- |
-[Control_position] |
-Position_control_enabled=false |
-Alarm_on_error_enabled=false |
-Error_correction_enabled=true |
-Rev_sens_inv_enabled=false |
-Based_on_rev_sens=false |
-Min_error=3 |
- |
-[Controller_name] |
-EEPROM_precedence=false |
- |
-[Stage] |
-Positioner_name= |
-Manufacturer=Standa |
-Part_number=8MT175-150 |
-Lead_screw_pitch=0.5 |
-Units=mm |
-Max_speed=10 |
-Travel_range=150 |
-Supply_voltage_min=12 |
-Supply_voltage_max=36 |
-Max_current_consumption=0 |
-Horizontal_load_capacity=8 |
-Vertical_load_capacity=3 |
- |
-[StageMotor] |
-Manufacturer=Motion Control P |
-Part_number=FL42STH47-1204B |
-Type=STEP |
-Poles=0 |
-Phases=0 |
-Nominal_voltage=3.84 |
-Nominal_current=1.2 |
-Nominal_speed=0 |
-Nominal_torque=0.45 |
-Nominal_power=0 |
-Winding_resistance=3.2 |
-Winding_inductance=6 |
-Rotor_inertia=82 |
-Stall_torque=0 |
-Detent_torque=0 |
-Torque_constant=0 |
-Speed_constant=0 |
-Speed_torque_gradient=0 |
-Mechanical_time_constant=0 |
-Max_speed=5000 |
-Max_current=0 |
-Max_current_time=0 |
-No_load_current=0 |
-No_load_speed=0 |
- |
-[StageEncoder] |
-Manufacturer= |
-Part_number= |
-Max_operating_frequency=0 |
-Max_current_consumption=0 |
-Supply_voltage_min=0 |
-Supply_voltage_max=0 |
-Pulses_per_revolution=1000 |
-Differential_output=false |
-Pushpull_output=false |
-Index_channel_present=false |
-Revolution_sensor_present=false |
-Revolution_sensor_active_high=false |
- |
-[StageHallsensor] |
-Manufacturer= |
-Part_number= |
-Max_operating_frequency=0 |
-Max_current_consumption=0 |
-Supply_voltage_min=0 |
-Supply_voltage_max=0 |
-Pulses_per_revolution=0 |
- |
-[StageGear] |
-Manufacturer= |
-Part_number= |
-Reduction_in=1 |
-Reduction_out=1 |
-Rated_input_speed=0 |
-Rated_input_torque=0 |
-Max_output_backlash=0 |
-Input_inertia=0 |
-Efficiency=0 |
- |
-[StageAccessories] |
-Magnetic_brake_info= |
-MB_rated_voltage=0 |
-MB_rated_current=0 |
-MB_torque=0 |
-MB_available=false |
-MB_powered_hold=false |
-Temperature_sensor_info= |
-TS_min=0 |
-TS_max=0 |
-TS_grad=0 |
-TS_type=THERMOCOUPLE |
-TS_available=false |
-LS_on_sw1_available=false |
-LS_on_sw2_available=false |
-LS_sw1_active_low=false |
-LS_sw2_active_low=false |
-LS_shorted=false |
Index: standa/2019-10/labview-2.9.14-Labview_12.0.7z |
=================================================================== |
Cannot display: file marked as a binary type. |
svn:mime-type = application/octet-stream |
/standa/2019-10/labview-2.9.14-Labview_12.0.7z |
Property changes: |
Deleted: svn:mime-type |
## -1 +0,0 ## |
-application/octet-stream |
\ No newline at end of property |
Index: standa/2019-10/xilab-1.14.12-win32_win64.exe |
=================================================================== |
Cannot display: file marked as a binary type. |
svn:mime-type = application/octet-stream |
/standa/2019-10/xilab-1.14.12-win32_win64.exe |
Property changes: |
Deleted: svn:mime-type |
## -1 +0,0 ## |
-application/octet-stream |
\ No newline at end of property |
Index: standa/2019-10/dokumentacija-scan.pdf |
=================================================================== |
Cannot display: file marked as a binary type. |
svn:mime-type = application/octet-stream |