Subversion Repositories f9daq

Compare Revisions

No changes between revisions

Ignore whitespace Rev 353 → Rev 354

/praktikum/fmf-fft-p5/motor.c
0,0 → 1,739
#include <cvirte.h>
#include <userint.h>
#include <utility.h>
#include <ansi_c.h>
#include <rs232.h>
#include <string.h>
#include <stdio.h>
#include <stdlib.h>
#include "motor.h"
#include <analysis.h>
#include <math.h>
 
//stepping motor busheng --> declaration 1step=1.8degrees
//experimantally: full rotation = 3200 steps (on setting 1step/mm ($100))
 
 
int pCOM1 = 6;
int pCOM2 = 7;
 
int run, graph, f_t, ji, vi, run1;
int left_1, right_1;
 
static int panel, tfID, tfID1;
static int poolHandle = 0;
 
#define TEXT_LENGTH 2000
#define MAX_THREADS 10
 
double volt_g[TEXT_LENGTH], volt_g1[TEXT_LENGTH*200];
 
int bytes_read0;
int bytes_read1;
 
char read_data0[TEXT_LENGTH];
char read_data1[TEXT_LENGTH];
 
 
void initialize()
{
// Open grbl serial port //("COM6",115200)
OpenComConfig (pCOM1, "COM6", 115200, 0, 8, 1, 512, 512);
 
/* Turn off Hardware handshaking (loopback test will not function with it on) */
SetCTSMode (pCOM1, LWRS_HWHANDSHAKE_OFF);
 
ComWrt (pCOM1, "\r\n\r\n", 5); //Writing on Port
Delay(2); //Wait for grbl to initialize
 
int strLen0 = GetInQLen (pCOM1); //Reading from Port
bytes_read0 = ComRd (pCOM1, read_data0, strLen0);
printf("%s\n", read_data0);
 
//Left in this form - can have more initializing commands if needeed
char init[1][10] = {"$RST=$\n"};//, "$100=20\n","$$\n","$100=100\n"
char *cmd;
 
for(int i=0; i<1; i++)
{
cmd = init + i; //Takes init[i]
int len = strlen(cmd);
ComWrt (pCOM1, cmd, len);
printf("%s", cmd);
 
Delay(0.01); //Give it a little time to respond...
 
int strLen1 = GetInQLen (pCOM1);
bytes_read1 = ComRd (pCOM1, read_data1, strLen1);
printf(" : %s\n", read_data1);
//printf("bytes_read = %d\n\n", bytes_read1);
}
 
FlushOutQ (pCOM1);
 
}
 
 
void asking_position()
{
while (1)
{
FlushInQ (pCOM1);
FlushOutQ (pCOM1);
 
ComWrt (pCOM1, "?\n", 2); //asks grbl his position
Delay(0.01);
 
int strLen0 = GetInQLen (pCOM1);
bytes_read0 = ComRd (pCOM1, read_data0, strLen0);
//printf(" : %s", read_data0);
//printf("bytes_read = %d\n\n", bytes_read0);
 
//taking subtring of a string to first appernace of character
char *read_data_0 = strtok(read_data0, "\n");
//printf(" : %s\n", read_data_0);
 
//finding substring in string
char *substr = strstr(read_data_0,"Idle");
//printf("\n%s\n", substr);
 
if(substr>0) break;
 
if (!run)
{
ComWrt (pCOM1, "!\n", 2); //stops grbl
 
Delay(0.01);
 
ComWrt (pCOM1, "~\n", 2); //releases grbl
 
Delay(0.01);
 
int strLen = GetInQLen (pCOM1);
bytes_read0 = ComRd (pCOM1, read_data0, strLen);
//printf(" : %s", read_data0);
 
break;
}
}
}
 
 
void initialize_voltage()
{
// Open serial port for photodetector - reading is on chanel A1
OpenComConfig (pCOM2, "COM7", 115200, 0, 8, 1, 512, 512);
SetCTSMode (pCOM2, LWRS_HWHANDSHAKE_OFF);
 
Delay(0.5);
FlushInQ (pCOM2);
FlushOutQ (pCOM2);
 
}
 
 
int bytes_read2;
char read_data2[TEXT_LENGTH];
 
double read_voltage()
{
 
//int strLen2 = GetInQLen (pCOM2);
bytes_read2 = ComRdTerm (pCOM2, read_data2, 11, 10);
//IMPORTANT: 11 bytes is the size of one line
printf("Voltage: \n%s\n", read_data2);
//printf("bytes_read = %d\n\n", bytes_read2);
//Delay(0.1);
 
double Volt;
sscanf(read_data2, "%lf", &Volt);
//printf("Volt = %lf\n", Volt);
return Volt;
}
 
 
int bytes_read3;
char read_data3[TEXT_LENGTH];
 
void movement(int steps)
{
 
//Move on the steps
char str[10], move[20] = "$J=X";
sprintf(str,"%d",steps);
strcat(move,str);
strcat(move,"F600\n");
//Command must look like "X200\n" or "$J=X200F600"
int len0 = strlen(move);
//printf("len0 is %d ", len0);
printf("Moving on point %d\n", steps);
 
ComWrt (pCOM1, move, len0);
Delay(0.01);
 
int strLen3 = GetInQLen (pCOM1);
bytes_read3 = ComRd (pCOM1, read_data3, strLen3);
//printf(" :\n%s", read_data3);
//printf("bytes_read = %d\n\n", bytes_read3);
FlushInQ (pCOM1);
 
}
 
 
static int CVICALLBACK daq_run(void *functionData)
{
 
int num_points;
int waittime;
double volt;
int j = 0; //for graph
 
GetCtrlVal(panel, p1_NUM_POINTS, &num_points);
GetCtrlVal(panel, p1_WAIT_TIME, &waittime);
//double wait = waittime/1000.0; //Wait time between each step
//printf("wait: %lf", wait);
 
movement(0);
Delay(0.1);
 
asking_position();
 
initialize_voltage();
 
if (!run) return 0;
 
FlushInQ (pCOM1);
FlushOutQ (pCOM1);
 
Delay(0.1);
 
movement(num_points);
 
while (1) // Continious reading
{
volt = read_voltage();
FlushInQ (pCOM2);
SetCtrlVal(panel, p1_VOLTAGE, volt);
 
//writing in tabel for graph
volt_g1[j] = volt;
if (volt>6) volt_g1[j]=volt_g1[j-1];
if (volt<-0.1) volt_g1[j]=volt_g1[j-1];
j++;
 
if (!run) // Stopping grbl if pressed STOP
{
ComWrt (pCOM1, "!\n", 2); //stops grbl
Delay(0.01);
 
ComWrt (pCOM1, "~\n", 2); //releases grbl
Delay(0.01);
 
int strLen = GetInQLen (pCOM1);
bytes_read0 = ComRd (pCOM1, read_data0, strLen);
//printf(" : %s", read_data0);
break;
}
 
FlushInQ (pCOM1);
FlushOutQ (pCOM1);
 
ComWrt (pCOM1, "?\n", 2); //asks grbl his position
Delay(0.01);
 
int strLen5 = GetInQLen (pCOM1);
bytes_read0 = ComRd (pCOM1, read_data0, strLen5);
 
char *read_data_0 = strtok(read_data0, "\n");
 
char *substr2 = strstr(read_data_0,"Idle");
//printf("\n%d\n", substr);
 
if(substr2>0) break;
}
 
if (run)
{
// Choosing 2^n points
int j_j = j - 500; //cut off first 300 and last - 200 - points
int j_jj = j_j/num_points;
//printf("j_j = %d, j_jj = %d\n",j_j,j_jj);
 
//IMPORTANT! On graph must be only num_points of points
for (int i=0; i<num_points; i++)
{
volt_g[i] = volt_g1[300+i*j_jj];
}
}
 
// Moving by steps
 
/*for(int i=(-num_points/2); i<(num_points/2); i++)
{
//printf("i is: %d\n", i);
movement(i);
asking_position();
Delay(0.01); // Little time has to be in between so that grbl can respond
volt = read_voltage();
Delay(wait);
FlushInQ (pCOM1);
FlushInQ (pCOM2);
SetCtrlVal(panel, p1_VOLTAGE, volt);
 
//writing in tabel for graph
volt_g[j] = volt;
j++;
 
if (!run) break;
 
}*/
 
if (run) //IMPORTANT!! SAME NUM. of POINTS FOR FOURIER
{
//for(int i=0;i<j;i++) printf("volt_g[%d] = %lf\n",i,volt_g[i]);
if (graph>0) DeleteGraphPlot (panel, p1_VOLTAGE_GRAPH, graph, VAL_DELAYED_DRAW);
graph = PlotY (panel, p1_VOLTAGE_GRAPH, &volt_g[0], num_points, VAL_DOUBLE,
VAL_CONNECTED_POINTS, VAL_SIMPLE_DOT, VAL_SOLID, 1, VAL_WHITE);
ji = num_points;
f_t = 1;
}
 
FlushInQ (pCOM1);
FlushOutQ (pCOM1);
FlushInQ (pCOM2);
FlushOutQ (pCOM2);
run = 0;
 
return 0;
}
 
 
static int CVICALLBACK voltage_run(void *functionData)
{
int fix_range;
double ymin,ymax,xmin,xmax;
double voltA,voltB=0;
int time = 0;
//double volt1[TEXT_LENGTH];
 
initialize_voltage();
 
int chart = NewCtrl (panel, CTRL_GRAPH_LS, "RUN VOLTAGE", 100, 15);
SetCtrlAttribute(panel, chart, ATTR_HEIGHT, 600);
SetCtrlAttribute(panel, chart, ATTR_WIDTH , 1300);
 
while(1)
{
// Range
GetCtrlVal(panel, p1_RANGE, &fix_range);
if(fix_range)
{
GetAxisRange (panel, chart, VAL_MANUAL, &xmin, &xmax, VAL_MANUAL, &ymin, &ymax);
if (ymax<=2) SetAxisRange (panel, chart, VAL_NO_CHANGE, 0, 0, VAL_MANUAL, 0, 2);
else SetAxisRange (panel, chart, VAL_NO_CHANGE, 0, 0, VAL_MANUAL, 0, 5);
}
else SetAxisRange (panel, chart, VAL_NO_CHANGE, 0, 0, VAL_AUTOSCALE, 0, 0);
 
//volt1[time] = read_voltage();
voltA = read_voltage();
 
PlotPoint(panel, chart, time, voltA, VAL_SOLID_SQUARE, VAL_WHITE);
if (time>0) PlotLine(panel, chart, time, voltA, time-1, voltB, VAL_WHITE);
if (time>50) SetAxisRange (panel, chart, VAL_MANUAL, time-50, time, VAL_NO_CHANGE, 0, 0);
 
SetCtrlVal(panel, p1_VOLTAGE, voltA);
 
Delay(0.05);
time++;
 
voltB = voltA;
 
//volt1[time] = voltA;
 
FlushInQ (pCOM2);
 
if (vi == 0) break;
}
 
DiscardCtrl (panel, chart);
 
// After some time (~4000 points) it becomes slower in writing out data...
 
//if (graph!=0) DeleteGraphPlot (panel, p1_VOLTAGE_GRAPH, graph, VAL_DELAYED_DRAW);
//graph = PlotY (panel, p1_VOLTAGE_GRAPH, &volt1[0], time+1, VAL_DOUBLE,
// VAL_CONNECTED_POINTS, VAL_SIMPLE_DOT, VAL_SOLID, 1, VAL_WHITE);
 
return 0;
}
 
 
static int CVICALLBACK free_run(void *functionData)
{
if (run == 1) return 0;
run1 = 1;
 
if (left_1) movement(-10000);
if (right_1) movement(10000);
 
left_1 = 0;
right_1 = 0;
 
while (1)
{
if (run1 == 0)
{
ComWrt (pCOM1, "!\n", 2); //stops grbl
 
Delay(0.01);
 
ComWrt (pCOM1, "~\n", 2); //releases grbl
 
Delay(0.01);
 
int strLen = GetInQLen (pCOM1);
bytes_read0 = ComRd (pCOM1, read_data0, strLen);
//printf(" : %s", read_data0);
 
printf("Stop run1\n");
 
break;
}
}
 
return 0;
}
 
 
int main()
{
 
SetStdioPort(HOST_SYSTEM_STDIO);
SetStdioWindowOptions(1000000, 0, 0);
SetStdioWindowVisibility(1);
 
initialize();
 
CmtNewThreadPool (MAX_THREADS, &poolHandle);
 
DisplayPanel (panel = LoadPanel (0, "motor.uir", p1));
RunUserInterface ();
 
CmtDiscardThreadPool (poolHandle);
 
return 0;
}
 
 
int CVICALLBACK StartCB (int panel, int control, int event,
void *callbackData, int eventData1, int eventData2)
{
int dummy;
switch (event)
{
case EVENT_COMMIT:
 
if (run == 1) break;
 
run = 1;
 
CmtScheduleThreadPoolFunction (poolHandle, daq_run, (void *)&dummy, &tfID);
 
}
 
return 0;
}
 
 
int CVICALLBACK StopCB (int panel, int control, int event,
void *callbackData, int eventData1, int eventData2)
{
switch (event)
{
case EVENT_COMMIT:
 
if (run == 0) break;
 
run = 0;
 
CmtWaitForThreadPoolFunctionCompletion (poolHandle, tfID,
OPT_TP_PROCESS_EVENTS_WHILE_WAITING);
CmtReleaseThreadPoolFunctionID (poolHandle, tfID);
 
printf("Stop\n");
 
break;
 
}
 
return 0;
}
 
 
int CVICALLBACK ExitCB (int panel, int control, int event,
void *callbackData, int eventData1, int eventData2)
{
switch (event)
{
case EVENT_COMMIT:
QuitUserInterface (0);
CloseCom(pCOM1);
CloseCom(pCOM2);
break;
}
return 0;
}
 
 
int CVICALLBACK Fourier_TransCB (int panel, int control, int event,
void *callbackData, int eventData1, int eventData2)
{
if (!ji) return 0;
const int ii = ji;
double fourier_t[ii], fourier_ti[ii];
char window_fun;
 
switch (event)
{
case EVENT_COMMIT:
 
for(int i=0; i<ii; i++)
{
fourier_t[i] = volt_g[i];
fourier_ti[i] = 0;
}
 
GetCtrlVal(panel, p1_WIN_FUN, &window_fun);
//printf("window_fun = %d\n", window_fun);
if (window_fun!=0)
{
//do something with window functions
if(window_fun==1) for(int i=0; i<ii; i++) fourier_t[i] = (2*fourier_t[i]);
if(window_fun==2) for(int i=0; i<ii; i++) fourier_t[i] = sin(fourier_t[i]);
YGraphPopup ("HOW volt_g LOOKS NOW", fourier_t, ii, VAL_DOUBLE);
}
 
FFT (fourier_t, fourier_ti, ii);
for (int i=0; i<ii; i++) fourier_t[i] = fabs(fourier_t[i]);
fourier_t[0]=0;
 
YGraphPopup ("FOURIER", fourier_t, ii/2+1, VAL_DOUBLE);
 
if (f_t == 1)
{
FILE *fp,*fp1;
 
//file name has to have file extension
char fname[50];
GetCtrlVal(panel, p1_F_NAME, fname);
fp = fopen(fname, "w");
 
char fname1[50];
GetCtrlVal(panel, p1_F_NAME1, fname1);
fp1 = fopen(fname1, "w");
 
fprintf(fp, "step\tvolt_g\n");
for(int i=0; i<ii; i++)
{
fprintf(fp, "%d\t%lf\n", i+1, volt_g[i]);
}
 
fprintf(fp1, "step\tfourier_t\n");
for(int i=0; i<ii/2+1; i++)
{
fprintf(fp1, "%d\t%lf\n", i, fourier_t[i]); //0th component is from DC - background?
}
 
fclose(fp);
fclose(fp1);
printf("Files %s and %s created.\n", fname, fname1);
}
 
f_t = 0; //so that we make only one file
break;
 
}
 
return 0;
}
 
 
int CVICALLBACK ExamplesCB (int panel, int control, int event,
void *callbackData, int eventData1, int eventData2)
{
const int ki=1024;
double ret[ki], ret1[ki];
double val = 3.14159265/180;
int x1, x2, a1, a2;
 
switch (event)
{
case EVENT_COMMIT:
 
GetCtrlVal(panel, p1_FREQ1, &x1);
GetCtrlVal(panel, p1_FREQ2, &x2);
GetCtrlVal(panel, p1_AMPL1, &a1);
GetCtrlVal(panel, p1_AMPL2, &a2);
 
for (int i=0; i<ki; i++)
{
ret[i] = a1*sin(x1*i*val)+a2*sin(x2*i*val);
ret1[i] = 0;
}
YGraphPopup ("example graph", ret, ki, VAL_DOUBLE);
FFT (ret, ret1, ki);
for (int i=0; i<ki; i++) ret[i] = fabs(ret[i]);
//for (int i=0;i<ki;i++) printf("basic: %lf, fourier: %lf\n", ret1[i], ret[i]);
YGraphPopup ("example fourier", ret, ki/2+1, VAL_DOUBLE);
 
break;
}
return 0;
}
 
 
int CVICALLBACK Only_voltageCB (int panel, int control, int event,
void *callbackData, int eventData1, int eventData2)
{
int dummy, volt_run;
 
switch (event)
{
case EVENT_COMMIT:
 
GetCtrlVal (panel, p1_VOLT_GRAPH, &volt_run);
 
if(volt_run)
{
vi = 1;
CmtScheduleThreadPoolFunction (poolHandle, voltage_run, (void *)&dummy, &tfID);
}
 
else
{
vi = 0;
CmtWaitForThreadPoolFunctionCompletion (poolHandle, tfID,
OPT_TP_PROCESS_EVENTS_WHILE_WAITING);
CmtReleaseThreadPoolFunctionID (poolHandle, tfID);
}
 
break;
}
return 0;
}
 
 
int CVICALLBACK RangeCB (int panel, int control, int event,
void *callbackData, int eventData1, int eventData2)
{
int fix_range;
double ymin,ymax,xmin,xmax;
switch (event)
{
case EVENT_COMMIT:
 
GetCtrlVal(panel, p1_RANGE, &fix_range);
if(fix_range)
{
GetAxisRange (panel, p1_VOLTAGE_GRAPH, VAL_MANUAL, &xmin, &xmax, VAL_MANUAL, &ymin, &ymax);
if (ymax<=2) SetAxisRange (panel, p1_VOLTAGE_GRAPH, VAL_NO_CHANGE, 0, 0, VAL_MANUAL, 0, 2);
else SetAxisRange (panel, p1_VOLTAGE_GRAPH, VAL_NO_CHANGE, 0, 0, VAL_MANUAL, 0, 5);
}
else SetAxisRange (panel, p1_VOLTAGE_GRAPH, VAL_NO_CHANGE, 0, 0, VAL_AUTOSCALE, 0, 0);
 
break;
 
}
 
return 0;
}
 
 
int CVICALLBACK FreeMoveCB (int panel, int control, int event,
void *callbackData, int eventData1, int eventData2)
{
int dummy;
 
switch (event)
{
case EVENT_COMMIT:
 
if (run == 1) break;
if (run1 == 1) break;
right_1 = 1;
 
CmtScheduleThreadPoolFunction (poolHandle, free_run, (void *)&dummy, &tfID1);
 
break;
 
}
 
return 0;
}
 
int CVICALLBACK FreeMove1CB (int panel, int control, int event,
void *callbackData, int eventData1, int eventData2)
{
int dummy;
 
switch (event)
{
case EVENT_COMMIT:
 
if (run == 1) break;
if (run1 == 1) break;
left_1 = 1;
 
CmtScheduleThreadPoolFunction (poolHandle, free_run, (void *)&dummy, &tfID1);
 
break;
 
}
 
return 0;
}
 
int CVICALLBACK FreeMoveStopCB (int panel, int control, int event,
void *callbackData, int eventData1, int eventData2)
{
switch (event)
{
case EVENT_COMMIT:
 
if (run == 1) break;
if (run1 == 0) break;
run1 = 0;
 
CmtWaitForThreadPoolFunctionCompletion (poolHandle, tfID1,
OPT_TP_PROCESS_EVENTS_WHILE_WAITING);
CmtReleaseThreadPoolFunctionID (poolHandle, tfID1);
 
break;
 
}
 
return 0;
}
 
 
int CVICALLBACK Pos0CB (int panel, int control, int event,
void *callbackData, int eventData1, int eventData2)
{
switch (event)
{
case EVENT_COMMIT:
 
if (run == 1) break;
if (run1 == 1) break;
FlushInQ (pCOM1);
FlushOutQ (pCOM1);
CloseCom(pCOM1);
initialize();
 
break;
 
}
 
return 0;
}
/praktikum/fmf-fft-p5/motor.cds
0,0 → 1,59
<distribution version="13.0.2" name="Motor" type="MSI">
<prebuild>
<workingdir>workspacedir</workingdir>
<actions></actions></prebuild>
<postbuild>
<workingdir>workspacedir</workingdir>
<actions></actions></postbuild>
<msi GUID="{442B57EB-65A0-4E76-BBDB-A10A4663CF27}">
<general appName="Motor" outputLocation="c:\home\Fourier\grbl-master\New\cvidistkit.Motor" relOutputLocation="cvidistkit.Motor" outputLocationWithVars="c:\home\Fourier\grbl-master\New\cvidistkit.%name" relOutputLocationWithVars="cvidistkit.%name" upgradeBehavior="1" autoIncrement="true" version="1.0.1">
<arp company="" companyURL="" supportURL="" contact="" phone="" comments=""/>
<summary title="" subject="" keyWords="" comments="" author=""/></general>
<userinterface language="English" showPaths="true" readMe="" license="">
<dlgstrings welcomeTitle="Motor" welcomeText=""/></userinterface>
<dirs appDirID="101">
<installDir name="[Program Files]" dirID="2" parentID="-1" isMSIDir="true" visible="true" unlock="false"/>
<installDir name="Motor" dirID="100" parentID="7" isMSIDir="false" visible="true" unlock="false"/>
<installDir name="Motor" dirID="101" parentID="2" isMSIDir="false" visible="true" unlock="false"/>
<installDir name="[Start&gt;&gt;Programs]" dirID="7" parentID="-1" isMSIDir="true" visible="true" unlock="false"/></dirs>
<files>
<simpleFile fileID="0" sourcePath="c:\home\Fourier\grbl-master\New\motor.uir" relSourcePath="motor.uir" relSourceBase="0" targetDir="101" readonly="false" hidden="false" system="false" regActiveX="false" runAfterInstallStyle="IMMEDIATELY_RESUME_INSTALL" cmdLineArgs="" runAfterInstall="false" uninstCmdLnArgs="" runUninst="false"/>
<simpleFile fileID="1" sourcePath="c:\home\Fourier\grbl-master\New\cvibuild.motor\Release\motor.exe" targetDir="101" readonly="false" hidden="false" system="false" regActiveX="false" runAfterInstallStyle="IMMEDIATELY_RESUME_INSTALL" cmdLineArgs="" runAfterInstall="false" uninstCmdLnArgs="" runUninst="false"/></files>
<fileGroups>
<projectOutput targetType="0" dirID="101" projectID="0">
<fileID>1</fileID></projectOutput>
<projectDependencies dirID="101" projectID="0"/></fileGroups>
<shortcuts>
<shortcut name="Motor" targetFileID="1" destDirID="100" cmdLineArgs="" description="" runStyle="NORMAL"/></shortcuts>
<mergemodules/>
<products/>
<runtimeEngine installToAppDir="false" activeXsup="true" analysis="true" cvirte="true" dotnetsup="true" instrsup="true" lowlevelsup="true" lvrt="true" netvarsup="true" rtutilsup="true">
<hasSoftDeps/></runtimeEngine><sxsRuntimeEngine>
<selected>false</selected>
<doNotAutoSelect>false</doNotAutoSelect></sxsRuntimeEngine>
<advanced mediaSize="650">
<launchConditions>
<condition>MINOS_WINXP_SP0</condition>
</launchConditions>
<includeConfigProducts>true</includeConfigProducts>
<maxImportVisible>silent</maxImportVisible>
<maxImportMode>merge</maxImportMode>
<custMsgFlag>false</custMsgFlag>
<custMsgPath>msgrte.txt</custMsgPath>
<signExe>false</signExe>
<certificate></certificate>
<signTimeURL></signTimeURL>
<signDescURL></signDescURL></advanced>
<Projects NumProjects="1">
<Project000 ProjectID="0" ProjectAbsolutePath="c:\home\Fourier\grbl-master\New\motor.prj" ProjectRelativePath="motor.prj"/></Projects>
<buildData progressBarRate="0.632346622824811">
<progressTimes>
<Begin>0.000000000000000</Begin>
<ProductsAdded>0.054570000000000</ProductsAdded>
<DPConfigured>1.179570000000000</DPConfigured>
<DPMergeModulesAdded>3.294570000000001</DPMergeModulesAdded>
<DPClosed>11.194570000000001</DPClosed>
<DistributionsCopied>16.394801000000001</DistributionsCopied>
<End>158.141115000000010</End></progressTimes></buildData>
</msi>
</distribution>
/praktikum/fmf-fft-p5/motor.cws
0,0 → 1,170
[Workspace Header]
Version = 1302
Pathname = "/c/home/Fourier/grbl-master/praktikum_fft/motor.cws"
CVI Dir = "/c/program files (x86)/national instruments/cvi2013"
CVI Shared Dir = "/C/Program Files (x86)/National Instruments/Shared/CVI"
CVI Pub Local Dir = "/C/ProgramData/National Instruments/CVI2013"
CVI Pub Global Dir = "/C/ProgramData/National Instruments/CVI"
IVI Standard Root Dir = "/C/Program Files (x86)/IVI Foundation/IVI"
IVI Standard Root 64-bit Dir = "/C/Program Files/IVI Foundation/IVI"
VXIplug&play Framework Dir = "/C/Program Files (x86)/IVI Foundation/VISA/winnt"
VXIplug&play Framework 64-bit Dir = "/C/Program Files/IVI Foundation/VISA/win64"
Number of Projects = 1
Active Project = 1
Project 0001 = "motor.prj"
Drag Bar Left = 320
Window Top = 75
Window Left = 601
Window Bottom = 881
Window Right = 1849
Maximized = True
Maximized Children = True
Max32 Number Of Errors = 20
Track Include File Dependencies = True
Prompt For Missing Includes = True
Stop On First Error File = False
Bring Up Err Win At Start = True
Bring Up Err Win For Errors = False
Save Changes Before Running = "Always"
Save Changes Before Compiling = "Always"
Hide Windows = False
Break At First Statement = False
Sort Type = "File Name"
Number of Opened Files = 3
Window Confinement Region Enabled = True
MainColumnWidth = 303
FileDateColumnWidth = 70
FileSizeColumnWidth = 70
 
[Project Header 0001]
Version = 1302
Don't Update DistKit = False
Platform Code = 4
Build Configuration = "Debug"
Warn User If Debugging Release = 1
Batch Build Release = False
Batch Build Debug = False
 
[File 0001]
Path = "/c/home/Fourier/grbl-master/praktikum_fft/motor.c"
File Type = "CSource"
Disk Date = 3677835890
In Projects = "1,"
Window Top = 31
Window Z-Order = 1
Source Window State = "1,575,575,575,33,37,37,0,0,173,0,583,0,0,0,47,675,0,579,45,400,600,1,0,"
 
[File 0002]
Path = "/c/home/Fourier/grbl-master/praktikum_fft/motor.uir"
File Type = "User Interface Resource"
Disk Date = 3677835891
In Projects = "1,"
Window Top = 126
Window Left = 58
Window Height = 363
Window Width = 768
Window Z-Order = 2
 
[File 0003]
Path = "/c/home/Fourier/grbl-master/praktikum_fft/motor.h"
File Type = "Include"
Disk Date = 3677835891
In Projects = ""
Window Top = 33
Window Left = 10
Window Z-Order = 3
Source Window State = "1,33,33,33,9,22,22,0,3,80,0,0,0,0,0,21,23,0,33,9,363,768,1,0,"
 
[Tab Order]
Tab 0001 = "/c/home/Fourier/grbl-master/praktikum_fft/motor.c"
Tab 0002 = "/c/home/Fourier/grbl-master/praktikum_fft/motor.uir"
Tab 0003 = "/c/home/Fourier/grbl-master/praktikum_fft/motor.h"
 
[Default Build Config 0001 Debug]
Generate Browse Info = True
Enable Uninitialized Locals Runtime Warning = True
Batch Build = False
Profile = "Disabled"
Debugging Level = "Standard"
Execution Trace = "Disabled"
Command Line Args = ""
Working Directory = ""
Environment Options = ""
External Process Path = ""
 
[Default Build Config 0001 Release]
Generate Browse Info = True
Enable Uninitialized Locals Runtime Warning = True
Batch Build = False
Profile = "Disabled"
Debugging Level = "Standard"
Execution Trace = "Disabled"
Command Line Args = ""
Working Directory = ""
Environment Options = ""
External Process Path = ""
 
[Default Build Config 0001 Debug64]
Generate Browse Info = True
Enable Uninitialized Locals Runtime Warning = True
Batch Build = False
Profile = "Disabled"
Debugging Level = "Standard"
Execution Trace = "Disabled"
Command Line Args = ""
Working Directory = ""
Environment Options = ""
External Process Path = ""
 
[Default Build Config 0001 Release64]
Generate Browse Info = True
Enable Uninitialized Locals Runtime Warning = True
Batch Build = False
Profile = "Disabled"
Debugging Level = "Standard"
Execution Trace = "Disabled"
Command Line Args = ""
Working Directory = ""
Environment Options = ""
External Process Path = ""
 
[Build Dependencies 0001]
Number of Dependencies = 0
 
[Build Options 0001]
Generate Browse Info = True
Enable Uninitialized Locals Runtime Warning = True
Execution Trace = "Disabled"
Profile = "Disabled"
Debugging Level = "Standard"
Break On Library Errors = True
Break On First Chance Exceptions = False
 
[Execution Target 0001]
Execution Target Address = "Local desktop computer"
Execution Target Port = 0
Execution Target Type = 0
 
[SCC Options 0001]
Use global settings = True
SCC Provider = ""
SCC Project = ""
Local Path = ""
Auxiliary Path = ""
Perform Same Action For .h File As For .uir File = "Ask"
Perform Same Action For .cds File As For .prj File = "Ask"
Username = ""
Comment = ""
Use Default Username = False
Use Default Comment = False
Suppress CVI Error Messages = False
Always show confirmation dialog = True
 
[DLL Debugging Support 0001]
External Process Path = ""
 
[Command Line Args 0001]
Command Line Args = ""
Working Directory = ""
Environment Options = ""
 
/praktikum/fmf-fft-p5/motor.h
0,0 → 1,68
/**************************************************************************/
/* LabWindows/CVI User Interface Resource (UIR) Include File */
/* */
/* WARNING: Do not add to, delete from, or otherwise modify the contents */
/* of this include file. */
/**************************************************************************/
 
#include <userint.h>
 
#ifdef __cplusplus
extern "C" {
#endif
 
/* Panels and Controls: */
 
#define p1 1
#define p1_LEFT_1 2 /* control type: command, callback function: FreeMove1CB */
#define p1_RIGHT_1 3 /* control type: command, callback function: FreeMoveCB */
#define p1_STOP_1 4 /* control type: command, callback function: FreeMoveStopCB */
#define p1_EXIT 5 /* control type: command, callback function: ExitCB */
#define p1_STOP 6 /* control type: command, callback function: StopCB */
#define p1_FOURIER 7 /* control type: command, callback function: Fourier_TransCB */
#define p1_START 8 /* control type: command, callback function: StartCB */
#define p1_VOLTAGE 9 /* control type: numeric, callback function: (none) */
#define p1_WAIT_TIME 10 /* control type: numeric, callback function: (none) */
#define p1_VOLTAGE_GRAPH 11 /* control type: graph, callback function: (none) */
#define p1_NUM_POINTS 12 /* control type: ring, callback function: (none) */
#define p1_F_NAME1 13 /* control type: string, callback function: (none) */
#define p1_F_NAME 14 /* control type: string, callback function: (none) */
#define p1_WIN_FUN 15 /* control type: ring, callback function: (none) */
#define p1_EXAMPLES 16 /* control type: command, callback function: ExamplesCB */
#define p1_FREQ2 17 /* control type: numeric, callback function: (none) */
#define p1_AMPL2 18 /* control type: numeric, callback function: (none) */
#define p1_AMPL1 19 /* control type: numeric, callback function: (none) */
#define p1_FREQ1 20 /* control type: numeric, callback function: (none) */
#define p1_VOLT_GRAPH 21 /* control type: textButton, callback function: Only_voltageCB */
#define p1_RANGE 22 /* control type: radioButton, callback function: RangeCB */
#define p1_POS0 23 /* control type: command, callback function: Pos0CB */
 
 
/* Control Arrays: */
 
/* (no control arrays in the resource file) */
 
 
/* Menu Bars, Menus, and Menu Items: */
 
/* (no menu bars in the resource file) */
 
 
/* Callback Prototypes: */
 
int CVICALLBACK ExamplesCB(int panel, int control, int event, void *callbackData, int eventData1, int eventData2);
int CVICALLBACK ExitCB(int panel, int control, int event, void *callbackData, int eventData1, int eventData2);
int CVICALLBACK Fourier_TransCB(int panel, int control, int event, void *callbackData, int eventData1, int eventData2);
int CVICALLBACK FreeMove1CB(int panel, int control, int event, void *callbackData, int eventData1, int eventData2);
int CVICALLBACK FreeMoveCB(int panel, int control, int event, void *callbackData, int eventData1, int eventData2);
int CVICALLBACK FreeMoveStopCB(int panel, int control, int event, void *callbackData, int eventData1, int eventData2);
int CVICALLBACK Only_voltageCB(int panel, int control, int event, void *callbackData, int eventData1, int eventData2);
int CVICALLBACK Pos0CB(int panel, int control, int event, void *callbackData, int eventData1, int eventData2);
int CVICALLBACK RangeCB(int panel, int control, int event, void *callbackData, int eventData1, int eventData2);
int CVICALLBACK StartCB(int panel, int control, int event, void *callbackData, int eventData1, int eventData2);
int CVICALLBACK StopCB(int panel, int control, int event, void *callbackData, int eventData1, int eventData2);
 
 
#ifdef __cplusplus
}
#endif
/praktikum/fmf-fft-p5/motor.prj
0,0 → 1,419
[Project Header]
Version = 1302
Pathname = "/c/home/Fourier/grbl-master/New/motor.prj"
CVI Dir = "/c/program files (x86)/national instruments/cvi2013"
CVI Shared Dir = "/C/Program Files (x86)/National Instruments/Shared/CVI"
CVI Pub Local Dir = "/C/ProgramData/National Instruments/CVI2013"
CVI Pub Global Dir = "/C/ProgramData/National Instruments/CVI"
IVI Standard Root Dir = "/C/Program Files (x86)/IVI Foundation/IVI"
VXIplug&play Framework Dir = "/C/Program Files (x86)/IVI Foundation/VISA/winnt"
IVI Standard Root 64-bit Dir = "/C/Program Files/IVI Foundation/IVI"
VXIplug&play Framework 64-bit Dir = "/C/Program Files/IVI Foundation/VISA/win64"
Number of Files = 2
Target Type = "Executable"
Flags = 2064
Copied From Locked InstrDrv Directory = False
Copied from VXIPNP Directory = False
Locked InstrDrv Name = ""
Don't Display Deploy InstrDrv Dialog = False
 
[Folders]
Include Files Folder Not Added Yet = True
Instrument Files Folder Not Added Yet = True
Library Files Folder Not Added Yet = True
Folder 0 = "Source Files"
FolderEx 0 = "Source Files"
Folder 1 = "User Interface Files"
FolderEx 1 = "User Interface Files"
 
[File 0001]
File Type = "CSource"
Res Id = 1
Path Is Rel = True
Path Rel To = "Project"
Path Rel Path = "motor.c"
Path = "/c/home/Fourier/grbl-master/New/motor.c"
Exclude = False
Compile Into Object File = False
Project Flags = 0
Folder = "Source Files"
Folder Id = 0
 
[File 0002]
File Type = "User Interface Resource"
Res Id = 2
Path Is Rel = True
Path Rel To = "Project"
Path Rel Path = "motor.uir"
Path = "/c/home/Fourier/grbl-master/New/motor.uir"
Exclude = False
Project Flags = 0
Folder = "User Interface Files"
Folder Id = 1
 
[Custom Build Configs]
Num Custom Build Configs = 0
 
[Default Build Config Debug]
Config Name = "Debug"
Is 64-Bit = False
Is Release = False
Default Calling Convention = "cdecl"
Optimization Level = "Optimize for speed (level 2)"
Require Prototypes = True
Show Warning IDs in Build Output = False
Selected Warning Level = "Common"
Warning List None = ""
Warning List Common = ""
Warning List Extended = ""
Warning List All = ""
Warning Mode = 0
Enable Unreferenced Identifiers Warning = True
Enable Pointer Mismatch Warning = True
Enable Unreachable Code Warning = True
Enable Assignment In Conditional Warning = True
Uninitialized Locals Compile Warning = "Aggressive"
Require Return Values = True
Enable C99 Extensions = True
Enable OpenMP Extensions = False
Stack Size = 250000
Stack Reserve = 1048576
Stack Commit = 4096
Image Base Address = 4194304
Image Base Address x64 = 4194304
Compiler Defines = "/DWIN32_LEAN_AND_MEAN"
Sign = False
Sign Store = ""
Sign Certificate = ""
Sign Timestamp URL = ""
Sign URL = ""
Manifest Embed = False
Icon File Is Rel = False
Icon File = ""
Application Title = ""
Use IVI Subdirectories for Import Libraries = False
Use VXIPNP Subdirectories for Import Libraries = False
Use Dflt Import Lib Base Name = True
Where to Copy DLL = "Do not copy"
Custom Directory to Copy DLL Is Rel = False
Custom Directory to Copy DLL = ""
Generate Source Documentation = "None"
Runtime Support = "Full Runtime Support"
Runtime Binding = "Shared"
Embed Project .UIRs = False
Generate Map File = False
Embed Timestamp = True
Create Console Application = False
Using LoadExternalModule = False
DLL Exports = "Include File Symbols"
Register ActiveX Server = False
Numeric File Version = "1,0,0,0"
Numeric Prod Version = "1,0,0,0"
Comments = ""
Comments Ex = ""
Company Name = ""
Company Name Ex = "%company"
File Description = "motor (Debug x86)"
File Description Ex = "%application (%rel_dbg %arch)"
File Version = "1.0"
File Version Ex = "%f1.%f2"
Internal Name = "motor"
Internal Name Ex = "%basename"
Legal Copyright = "Copyright © 2020"
Legal Copyright Ex = "Copyright © %company %Y"
Legal Trademarks = ""
Legal Trademarks Ex = ""
Original Filename = "motor.exe"
Original Filename Ex = "%filename"
Private Build = ""
Private Build Ex = ""
Product Name = " motor"
Product Name Ex = "%company %application"
Product Version = "1.0"
Product Version Ex = "%p1.%p2"
Special Build = ""
Special Build Ex = ""
Add Type Lib To DLL = False
Include Type Lib Help Links = False
TLB Help Style = "HLP"
Type Lib FP File Is Rel = False
Type Lib FP File = ""
 
[Default Build Config Release]
Config Name = "Release"
Is 64-Bit = False
Is Release = True
Default Calling Convention = "cdecl"
Optimization Level = "Optimize for speed (level 2)"
Require Prototypes = True
Show Warning IDs in Build Output = False
Selected Warning Level = "Common"
Warning List None = ""
Warning List Common = ""
Warning List Extended = ""
Warning List All = ""
Warning Mode = 0
Enable Unreferenced Identifiers Warning = True
Enable Pointer Mismatch Warning = True
Enable Unreachable Code Warning = True
Enable Assignment In Conditional Warning = True
Uninitialized Locals Compile Warning = "Aggressive"
Require Return Values = True
Enable C99 Extensions = True
Enable OpenMP Extensions = False
Stack Size = 250000
Stack Reserve = 1048576
Stack Commit = 4096
Image Base Address = 4194304
Image Base Address x64 = 4194304
Compiler Defines = "/DWIN32_LEAN_AND_MEAN"
Sign = False
Sign Store = ""
Sign Certificate = ""
Sign Timestamp URL = ""
Sign URL = ""
Manifest Embed = False
Icon File Is Rel = False
Icon File = ""
Application Title = ""
Use IVI Subdirectories for Import Libraries = False
Use VXIPNP Subdirectories for Import Libraries = False
Use Dflt Import Lib Base Name = True
Where to Copy DLL = "Do not copy"
Custom Directory to Copy DLL Is Rel = False
Custom Directory to Copy DLL = ""
Generate Source Documentation = "None"
Runtime Support = "Full Runtime Support"
Runtime Binding = "Shared"
Embed Project .UIRs = False
Generate Map File = False
Embed Timestamp = True
Create Console Application = False
Using LoadExternalModule = False
DLL Exports = "Include File Symbols"
Register ActiveX Server = False
Add Type Lib To DLL = False
Include Type Lib Help Links = False
TLB Help Style = "HLP"
Type Lib FP File Is Rel = False
Type Lib FP File = ""
 
[Default Build Config Debug64]
Config Name = "Debug64"
Is 64-Bit = True
Is Release = False
Default Calling Convention = "cdecl"
Optimization Level = "Optimize for speed (level 2)"
Require Prototypes = True
Show Warning IDs in Build Output = False
Selected Warning Level = "Common"
Warning List None = ""
Warning List Common = ""
Warning List Extended = ""
Warning List All = ""
Warning Mode = 0
Enable Unreferenced Identifiers Warning = True
Enable Pointer Mismatch Warning = True
Enable Unreachable Code Warning = True
Enable Assignment In Conditional Warning = True
Uninitialized Locals Compile Warning = "Aggressive"
Require Return Values = True
Enable C99 Extensions = True
Enable OpenMP Extensions = False
Stack Size = 250000
Stack Reserve = 1048576
Stack Commit = 4096
Image Base Address = 4194304
Image Base Address x64 = 4194304
Compiler Defines = "/DWIN32_LEAN_AND_MEAN"
Sign = False
Sign Store = ""
Sign Certificate = ""
Sign Timestamp URL = ""
Sign URL = ""
Manifest Embed = False
Icon File Is Rel = False
Icon File = ""
Application Title = ""
Use IVI Subdirectories for Import Libraries = False
Use VXIPNP Subdirectories for Import Libraries = False
Use Dflt Import Lib Base Name = True
Where to Copy DLL = "Do not copy"
Custom Directory to Copy DLL Is Rel = False
Custom Directory to Copy DLL = ""
Generate Source Documentation = "None"
Runtime Support = "Full Runtime Support"
Runtime Binding = "Shared"
Embed Project .UIRs = False
Generate Map File = False
Embed Timestamp = True
Create Console Application = False
Using LoadExternalModule = False
DLL Exports = "Include File Symbols"
Register ActiveX Server = False
Add Type Lib To DLL = False
Include Type Lib Help Links = False
TLB Help Style = "HLP"
Type Lib FP File Is Rel = False
Type Lib FP File = ""
 
[Default Build Config Release64]
Config Name = "Release64"
Is 64-Bit = True
Is Release = True
Default Calling Convention = "cdecl"
Optimization Level = "Optimize for speed (level 2)"
Require Prototypes = True
Show Warning IDs in Build Output = False
Selected Warning Level = "Common"
Warning List None = ""
Warning List Common = ""
Warning List Extended = ""
Warning List All = ""
Warning Mode = 0
Enable Unreferenced Identifiers Warning = True
Enable Pointer Mismatch Warning = True
Enable Unreachable Code Warning = True
Enable Assignment In Conditional Warning = True
Uninitialized Locals Compile Warning = "Aggressive"
Require Return Values = True
Enable C99 Extensions = True
Enable OpenMP Extensions = False
Stack Size = 250000
Stack Reserve = 1048576
Stack Commit = 4096
Image Base Address = 4194304
Image Base Address x64 = 4194304
Compiler Defines = "/DWIN32_LEAN_AND_MEAN"
Sign = False
Sign Store = ""
Sign Certificate = ""
Sign Timestamp URL = ""
Sign URL = ""
Manifest Embed = False
Icon File Is Rel = False
Icon File = ""
Application Title = ""
Use IVI Subdirectories for Import Libraries = False
Use VXIPNP Subdirectories for Import Libraries = False
Use Dflt Import Lib Base Name = True
Where to Copy DLL = "Do not copy"
Custom Directory to Copy DLL Is Rel = False
Custom Directory to Copy DLL = ""
Generate Source Documentation = "None"
Runtime Support = "Full Runtime Support"
Runtime Binding = "Shared"
Embed Project .UIRs = False
Generate Map File = False
Embed Timestamp = True
Create Console Application = False
Using LoadExternalModule = False
DLL Exports = "Include File Symbols"
Register ActiveX Server = False
Add Type Lib To DLL = False
Include Type Lib Help Links = False
TLB Help Style = "HLP"
Type Lib FP File Is Rel = False
Type Lib FP File = ""
 
[Compiler Options]
Default Calling Convention = "cdecl"
Require Prototypes = True
Require Return Values = True
Enable Pointer Mismatch Warning = True
Enable Unreachable Code Warning = True
Enable Unreferenced Identifiers Warning = True
Enable Assignment In Conditional Warning = True
O Option Compatible With 5.0 = False
Enable C99 Extensions = True
Uninitialized Locals Compile Warning = "Aggressive"
Precompile Prefix Header = False
Prefix Header File = ""
 
[Run Options]
Stack Size = 250000
Stack Commit = 4096
Image Base Address = 4194304
Image Base Address x64 = 4194304
 
[Compiler Defines]
Compiler Defines = "/DWIN32_LEAN_AND_MEAN"
 
[Create Executable]
Executable File_Debug Is Rel = True
Executable File_Debug Rel To = "Project"
Executable File_Debug Rel Path = "motor.exe"
Executable File_Debug = "/c/home/Fourier/grbl-master/New/motor.exe"
Executable File_Release Is Rel = True
Executable File_Release Rel To = "Project"
Executable File_Release Rel Path = "motor.exe"
Executable File_Release = "/c/home/Fourier/grbl-master/New/motor.exe"
Executable File_Debug64 Is Rel = True
Executable File_Debug64 Rel To = "Project"
Executable File_Debug64 Rel Path = "motor.exe"
Executable File_Debug64 = "/c/home/Fourier/grbl-master/New/motor.exe"
Executable File_Release64 Is Rel = True
Executable File_Release64 Rel To = "Project"
Executable File_Release64 Rel Path = "motor.exe"
Executable File_Release64 = "/c/home/Fourier/grbl-master/New/motor.exe"
Icon File Is Rel = False
Icon File = ""
Application Title = ""
DLL Exports = "Include File Symbols"
Use IVI Subdirectories for Import Libraries = False
Use VXIPNP Subdirectories for Import Libraries = False
Use Dflt Import Lib Base Name = True
Where to Copy DLL = "Do not copy"
Custom Directory to Copy DLL Is Rel = False
Custom Directory to Copy DLL = ""
Generate Source Documentation = "None"
Add Type Lib To DLL = False
Include Type Lib Help Links = False
TLB Help Style = "HLP"
Type Lib FP File Is Rel = False
Type Lib FP File = ""
Type Lib Guid = ""
Runtime Support = "Full Runtime Support"
Instrument Driver Support Only = False
Embed Project .UIRs = False
Generate Map File = False
 
[External Compiler Support]
UIR Callbacks File Option = 0
Using LoadExternalModule = False
Create Project Symbols File = True
UIR Callbacks Obj File Is Rel = False
UIR Callbacks Obj File = ""
Project Symbols H File Is Rel = False
Project Symbols H File = ""
Project Symbols Obj File Is Rel = False
Project Symbols Obj File = ""
 
[ActiveX Server Options]
Specification File Is Rel = False
Specification File = ""
Source File Is Rel = False
Source File = ""
Include File Is Rel = False
Include File = ""
IDL File Is Rel = False
IDL File = ""
Register ActiveX Server = False
 
[Signing Info]
Sign = False
Sign Debug Build = False
Store = ""
Certificate = ""
Timestamp URL = ""
URL = ""
 
[Manifest Info]
Embed = False
 
[tpcSection]
tpcEnabled = 0
tpcOverrideEnvironment = 0
tpcEnabled x64 = 0
tpcOverrideEnvironment x64 = 0
 
/praktikum/fmf-fft-p5/motor.uir
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Property changes:
Added: svn:mime-type
+application/octet-stream
\ No newline at end of property