Subversion Repositories f9daq

Compare Revisions

Ignore whitespace Rev 184 → Rev 185

/cvi/instr/K617/K617.c
0,0 → 1,273
#include <ansi_c.h>
#include <utility.h>
#include <gpib.h>
#include "K617.h"
 
K617STATUS K617Stat;
static int gdev,iret;
 
void GpibError(char *msg) {
 
printf ("%s\n", msg);
 
printf ("ibsta = &H%x <", ibsta);
if (ibsta & ERR ) printf (" ERR");
if (ibsta & TIMO) printf (" TIMO");
if (ibsta & END ) printf (" END");
if (ibsta & SRQI) printf (" SRQI");
if (ibsta & RQS ) printf (" RQS");
if (ibsta & CMPL) printf (" CMPL");
if (ibsta & LOK ) printf (" LOK");
if (ibsta & REM ) printf (" REM");
if (ibsta & CIC ) printf (" CIC");
if (ibsta & ATN ) printf (" ATN");
if (ibsta & TACS) printf (" TACS");
if (ibsta & LACS) printf (" LACS");
if (ibsta & DTAS) printf (" DTAS");
if (ibsta & DCAS) printf (" DCAS");
printf (" >\n");
 
printf ("iberr = %d", iberr);
if (iberr == EDVR) printf (" EDVR <DOS Error>\n");
if (iberr == ECIC) printf (" ECIC <Not Controller-In-Charge>\n");
if (iberr == ENOL) printf (" ENOL <No Listener>\n");
if (iberr == EADR) printf (" EADR <Address error>\n");
if (iberr == EARG) printf (" EARG <Invalid argument>\n");
if (iberr == ESAC) printf (" ESAC <Not System Controller>\n");
if (iberr == EABO) printf (" EABO <Operation aborted>\n");
if (iberr == ENEB) printf (" ENEB <No GPIB board>\n");
if (iberr == EOIP) printf (" EOIP <Async I/O in progress>\n");
if (iberr == ECAP) printf (" ECAP <No capability>\n");
if (iberr == EFSO) printf (" EFSO <File system error>\n");
if (iberr == EBUS) printf (" EBUS <Command error>\n");
if (iberr == ESTB) printf (" ESTB <Status byte lost>\n");
if (iberr == ESRQ) printf (" ESRQ <SRQ stuck on>\n");
if (iberr == ETAB) printf (" ETAB <Table Overflow>\n");
 
printf ("ibcntl = %ld\n", ibcntl);
printf ("\n");
 
/* Call ibonl to take the device and interface offline */
ibonl (gdev,0);
 
exit(1);
}
 
void _VI_FUNC K617_open (int interface, int primary_addr, int secondary_addr,
int timeout)
{
/*
gdev = OpenDev ("GPIB0", "");
if (ibsta & ERR) GpibError("OpenDev Error");
iret = ibpad (gdev, 0);
if (ibsta & ERR) GpibError("OpenDev Error");
iret = ibsad (gdev, NO_SAD);
iret = ibtmo (gdev, T10s);
iret = ibeot (gdev, 1);
iret = ibeos (gdev, 0);
*/
gdev = ibdev(interface,primary_addr,secondary_addr,timeout,1,0);
if (ibsta & ERR) GpibError("OpenDev Error");
Delay(GDELAY);
return;
}
 
void _VI_FUNC K617_clear (void)
{
iret = ibclr (gdev); /* Clear the device */
if (ibsta & ERR) GpibError("OpenDev Error");
Delay(GDELAY);
return;
}
 
void _VI_FUNC K617_send (char *cmd, int len)
{
iret = ibwrt (gdev, cmd, len);
if (ibsta & ERR) GpibError("OpenDev Error");
Delay(GDELAY);
return;
}
 
int _VI_FUNC K617_receive (char *response, int maxbyt)
{
iret = ibrd (gdev, response, maxbyt);
if (ibsta & ERR) GpibError("OpenDev Error");
response[ibcntl]=0;
return ibcntl;
}
 
void _VI_FUNC K617_status (void)
{
int len;
char cres[100];
K617_send ("U0X", 3);
len = K617_receive (cres, 90);
sscanf(cres," 617%1d%2d%1d%1d%1d%1d%1d%1d%1d%1d%1d%2d%1d%2c",
&K617Stat.function,&K617Stat.range,&K617Stat.zero_check,
&K617Stat.zero_correct,&K617Stat.suppress,&K617Stat.trigger,
&K617Stat.vsource_operate,&K617Stat.read_mode,
&K617Stat.data_prefix,&K617Stat.display,
&K617Stat.data_store,&K617Stat.srq,&K617Stat.eoi,K617Stat.terminator);
K617_send ("X", 1);
return;
}
 
void _VI_FUNC K617_data_format (int mode)
{
int len;
char cmd[100];
len=sprintf(cmd,"G%0dX",mode);
K617_send (cmd, len);
return;
}
 
double _VI_FUNC K617_get (char *prefix, int *loc)
{
int len;
double value;
char cres[100];
K617_send ("X", 1);
len = K617_receive (cres, 50);
if (loc) {
*loc=-1;
sscanf(cres,"%4c%lg,%d",prefix, &value, loc);
prefix[4]=0;
} else {
sscanf(cres,"%*4c%lg,%*d",&value);
}
return value;
}
 
void _VI_FUNC K617_current_mode (int range)
{
int len;
char cmd[100];
len=sprintf(cmd,"F1R%0dX",range);
// printf("%d, %s\n",len,cmd);
K617_send (cmd, len);
Delay(1);
return;
}
 
void _VI_FUNC K617_zero_correct (int zcorrect)
{
K617_send ("C0X", 3);
K617_send ("Z0X", 3);
if (zcorrect) {
K617_send ("C1X", 3);
Delay(2);
K617_send ("Z1X", 3);
K617_send ("C0X", 3);
}
return;
}
 
void _VI_FUNC K617_trigger_mode (int mode)
{
int len;
char cmd[100];
len=sprintf(cmd,"T%0dX",mode);
K617_send (cmd, len);
return;
}
 
void _VI_FUNC K617_reading_mode (int mode)
{
int len;
char cmd[100];
len=sprintf(cmd,"B%0dX",mode);
K617_send (cmd, len);
return;
}
 
void _VI_FUNC K617_vsource_set (float value)
{
int len;
char cmd[100];
value=0.05*floor((value+0.025)/0.05);
len=sprintf(cmd,"V%+0.2fX",value);
// printf("%d, %s\n",len,cmd);
K617_send (cmd, len);
return;
}
 
double _VI_FUNC K617_vsource_get (void)
{
double value;
K617_reading_mode (4);
value = K617_get (NULL, NULL);
K617_reading_mode (0);
return value;
}
 
void _VI_FUNC K617_vsource_operate (int operate)
{
 
if (operate)
K617_send ("O1X", 3);
else
K617_send ("O0X", 3);
return;
}
 
void _VI_FUNC K617_close (void)
{
// iret = CloseDev (gdev);
iret = ibonl(gdev, 0); /* Take the device offline */
if (ibsta & ERR) GpibError("OpenDev Error");
return;
}
 
#ifdef K617_MAIN
 
#include <cvirte.h>
 
int __stdcall WinMain (HINSTANCE hInstance, HINSTANCE hPrevInstance,
LPSTR lpszCmdLine, int nCmdShow)
{
int i;
double value;
char cres[100];
 
if (InitCVIRTE (hInstance, 0, 0) == 0) return -1; /* out of memory */
K617_open (0, 3, 0, 13);
/*
K617_clear ();
K617_current_mode (4);
K617_zero_correct (1);
K617_data_format (0);
K617_trigger_mode (0);
K617_vsource_set (-100.);
K617_vsource_operate (1);
*/
K617_status ();
 
value=K617_get(cres, &i);
printf("%s, %lg, %d\n",cres,value,i);
value=K617_vsource_get();
printf("%s, %lg, %d\n",cres,value,i);
value=K617_get(cres, &i);
printf("%s, %lg, %d\n",cres,value,i);
Delay(5);
// K617_vsource_operate (0);
K617_close ();
 
return 0;
}
 
#endif
/cvi/instr/K617/K617.fp
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Property changes:
Added: svn:mime-type
## -0,0 +1 ##
+application/octet-stream
\ No newline at end of property
Index: instr/K617/K617.h
===================================================================
--- instr/K617/K617.h (nonexistent)
+++ instr/K617/K617.h (revision 185)
@@ -0,0 +1,43 @@
+#include <cvidef.h>
+#include <ivi.h>
+
+#define GDELAY 0.01
+
+typedef struct {
+ int function,range,zero_check,zero_correct,suppress,trigger;
+ int vsource_operate,read_mode,data_prefix,display,data_store;
+ int srq,eoi;
+ char terminator[2];
+} K617STATUS;
+extern K617STATUS K617Stat;
+
+void _VI_FUNC K617_open (int interface, int primary_addr, int secondary_addr,
+ int timeout);
+
+void _VI_FUNC K617_clear (void);
+
+void _VI_FUNC K617_send (char *cmd, int len);
+
+int _VI_FUNC K617_receive (char *response, int maxbyt);
+
+void _VI_FUNC K617_status (void);
+
+void _VI_FUNC K617_data_format (int mode);
+
+double _VI_FUNC K617_get (char *prefix, int *loc);
+
+void _VI_FUNC K617_current_mode (int range);
+
+void _VI_FUNC K617_zero_correct (int zcorrect);
+
+void _VI_FUNC K617_trigger_mode (int mode);
+
+void _VI_FUNC K617_reading_mode (int mode);
+
+void _VI_FUNC K617_vsource_set (float value);
+
+double _VI_FUNC K617_vsource_get (void);
+
+void _VI_FUNC K617_vsource_operate (int operate);
+
+void _VI_FUNC K617_close (void);
Index: instr/K617/K617.prj
===================================================================
--- instr/K617/K617.prj (nonexistent)
+++ instr/K617/K617.prj (revision 185)
@@ -0,0 +1,168 @@
+[Project Header]
+Version = 551
+Platform Code = 4
+Pathname = "/c/MeasurementStudio/cvi/instr/K617/K617.prj"
+CVI Dir = "/c/measurementstudio/cvi"
+VXIplug&play Framework Dir = "/C/VXIpnp/winnt"
+Number of Files = 3
+Sort Type = "No Sort"
+Target Type = "Executable"
+Build Configuration = "Debug"
+Warn User If Debugging Release = 1
+Flags = 16
+Drag Bar Left = 136
+Window Top = 598
+Window Left = 539
+Window Bottom = 914
+Window Right = 1083
+
+[File 0001]
+File Type = "CSource"
+Path = "/c/MeasurementStudio/cvi/instr/K617/K617.c"
+Res Id = 1
+Exclude = False
+Disk Date = 3336716446
+Project Flags = 0
+Compile Into Object File = False
+Object Format = "Win32-MSVC"
+ForceCompile_Debug = False
+ForceCompile_Release = True
+Window Top = 147
+Window Left = 227
+Window Height = 0
+Window Width = 0
+Source Window State = "1,109,109,109,19,33,19,0,0,88,0,3,0,3,0,47,0,0,30,15,"
+Header Dependencies = "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,"
+Line Tags = "92,"
+
+[File 0002]
+File Type = "Function Panel"
+Path = "/c/MeasurementStudio/cvi/instr/K617/K617.fp"
+Res Id = 2
+Exclude = False
+Disk Date = 3336715149
+Project Flags = 0
+Window Top = 0
+Window Left = 0
+Window Height = 0
+Window Width = 0
+
+[File 0003]
+File Type = "Include"
+Path = "/c/MeasurementStudio/cvi/instr/K617/K617.h"
+Res Id = 3
+Exclude = False
+Disk Date = 3336964657
+Project Flags = 0
+Window Top = 476
+Window Left = 581
+Window Height = 0
+Window Width = 0
+Source Window State = "1,15,15,15,14,22,23,0,0,88,0,0,0,0,0,25,0,0,11,87,"
+Line Tags = "20,"
+
+[SCC Options]
+Use global settings = True
+SCC Provider = ""
+SCC Project = ""
+Local Path = ""
+Auxiliary Path = ""
+Perform Same Action For .h File As For .uir File = "Ask"
+Comment = ""
+Username = ""
+Use Default Comment = False
+Use Default Username = False
+Do Not Include PRJ File in Actions = True
+Suppress CVI Error Messages = False
+
+[Compiler Options]
+Default Calling Convention = "cdecl"
+Max Number Of Errors = 10
+Require Prototypes = True
+Require Return Values = True
+Enable Pointer Mismatch Warning = False
+Enable Unreachable Code Warning = False
+Track Include File Dependencies = True
+Prompt For Missing Includes = True
+Stop On First Error File = False
+Bring Up Err Win For Warnings = True
+Show Build Dialog = False
+O Option Compatible With 5.0 = False
+
+[Run Options]
+Stack Size = 250000
+Debugging Level = "Standard"
+Save Changes Before Running = "Ask"
+Break On Library Errors = True
+Break On First Chance Exceptions = False
+Hide Windows = False
+Break At First Statement = False
+
+[Compiler Defines]
+Compiler Defines = "/DWIN32_LEAN_AND_MEAN /DK617_MAIN"
+
+[Command Line Args]
+Command Line Args = ""
+
+[Included Headers]
+Header 0024 = "/c/MeasurementStudio/cvi/instr/K617/K617.h"
+Header 0001 = "/c/MeasurementStudio/cvi/include/ansi_c.h"
+Header 0002 = "/c/MeasurementStudio/cvi/include/cvidef.h"
+Header 0003 = "/c/MeasurementStudio/cvi/include/ivi.h"
+Header 0004 = "/c/MeasurementStudio/cvi/include/visa.h"
+Header 0005 = "/c/MeasurementStudio/cvi/include/ansi/stdarg.h"
+Header 0006 = "/c/MeasurementStudio/cvi/include/cvirte.h"
+Header 0007 = "/c/MeasurementStudio/cvi/include/visatype.h"
+Header 0008 = "/c/MeasurementStudio/cvi/include/ansi/assert.h"
+Header 0009 = "/c/MeasurementStudio/cvi/include/utility.h"
+Header 0010 = "/c/MeasurementStudio/cvi/include/ansi/limits.h"
+Header 0011 = "/c/MeasurementStudio/cvi/include/ansi/locale.h"
+Header 0012 = "/c/MeasurementStudio/cvi/include/ansi/ctype.h"
+Header 0013 = "/c/MeasurementStudio/cvi/include/ansi/errno.h"
+Header 0014 = "/c/MeasurementStudio/cvi/include/ansi/float.h"
+Header 0015 = "/c/MeasurementStudio/cvi/include/ansi/signal.h"
+Header 0016 = "/c/MeasurementStudio/cvi/include/ansi/stdlib.h"
+Header 0017 = "/c/MeasurementStudio/cvi/include/ansi/math.h"
+Header 0018 = "/c/MeasurementStudio/cvi/include/ansi/setjmp.h"
+Header 0019 = "/c/MeasurementStudio/cvi/include/ansi/string.h"
+Header 0020 = "/c/MeasurementStudio/cvi/include/ansi/stddef.h"
+Header 0021 = "/c/MeasurementStudio/cvi/include/ansi/stdio.h"
+Header 0022 = "/c/MeasurementStudio/cvi/include/ansi/time.h"
+Header 0023 = "/c/MeasurementStudio/cvi/include/gpib.h"
+Header 0025 = "/c/MeasurementStudio/cvi/include/vpptype.h"
+Max Header Number = 25
+
+[Create Executable]
+Executable File_Debug = "/c/MeasurementStudio/cvi/instr/K617/K617_dbg.exe"
+Target Creation Date_Debug = 3336719389
+Force Creation of Target_Debug = False
+Executable File_Release = ""
+Target Creation Date_Release = 0
+Force Creation of Target_Release = False
+Icon File = ""
+Application Title = ""
+DLL Exports = "Include File Symbols"
+DLL Import Library Choice = "Gen Lib For Current Mode"
+Use VXIPNP Subdirectories for Import Libraries = False
+Use Dflt Import Lib Base Name = True
+Where to Copy DLL = "Do not copy"
+Add Type Lib To DLL = False
+Include Type Lib Help Links = False
+Type Lib FP File = ""
+Type Lib Guid = ""
+Uses DataSocket = 0
+Uses NIReports = 0
+Uses DCom95 = 0
+Instrument Driver Support Only = False
+
+[External Compiler Support]
+UIR Callbacks File Option = 0
+Using LoadExternalModule = False
+Create Project Symbols File = True
+UIR Callbacks Obj File = ""
+Project Symbols H File = ""
+Project Symbols Obj File = ""
+
+[DLL Debugging Support]
+External Process Path = ""
+