WebSVN - f9daq - Blame - Rev 83

Rev	Author	Line No.	Line
52	f9daq	1	/*!
		2	-----------------------------------------------------------------------------
		3
		4	--- CAEN SpA - Computing Systems Division ---
		5
		6	-----------------------------------------------------------------------------
		7
		8	CAENVMElib.h
		9
		10	-----------------------------------------------------------------------------
		11
		12	Created: March 2004
		13
		14	-----------------------------------------------------------------------------
		15	*/
		16	#ifndef __CAENVMELIB_H
		17	#define __CAENVMELIB_H
		18
		19	#include <stdio.h>
		20	// Rev. 2.5
		21	#ifdef LINUX
		22	#include <stdint.h>
		23	#endif
		24	#include <stdlib.h>
		25	#ifndef _CVI_
		26	#include <malloc.h>
		27	#endif
		28	#include "CAENVMEoslib.h"
		29	#include "CAENVMEtypes.h"
		30
		31	#ifdef WIN32
83	f9daq	32	#ifndef _CVI_
		33
52	f9daq	34	typedef INT8 int8_t;
		35	typedef UINT8 uint8_t;
		36	typedef INT16 int16_t;
		37	typedef UINT16 uint16_t;
		38	typedef INT32 int32_t;
		39	typedef UINT32 uint32_t;
		40	typedef INT64 int64_t;
		41	typedef UINT64 uint64_t;
		42	#endif
		43	#endif
		44
		45	#ifdef __cplusplus
		46	extern "C" {
		47	#endif // __cplusplus
		48	/*
		49	CAENVME_DecodeError
		50	-----------------------------------------------------------------------------
		51	Parameters:
		52	[in] Code : The error code to decode.
		53	-----------------------------------------------------------------------------
		54	Returns:
		55	An string describing the error condition.
		56	-----------------------------------------------------------------------------
		57	Description:
		58	Decode the error.
		59	*/
		60	const char *
		61	#ifdef WIN32
		62	__stdcall
		63	#endif
		64	CAENVME_DecodeError(CVErrorCodes Code);
		65
		66	/*
		67	CAENVME_API CAENVME_SWRelease
		68	-----------------------------------------------------------------------------
		69	Parameters:
		70	[out] SwRel : Returns the software release of the library.
		71	-----------------------------------------------------------------------------
		72	Returns:
		73	An error code about the execution of the function.
		74	-----------------------------------------------------------------------------
		75	Description:
		76	Permits to read the software release of the library.
		77	*/
		78	CAENVME_API
		79	CAENVME_SWRelease(char *SwRel);
		80
		81	/*
		82	CAENVME_BoardFWRelease.
		83	-----------------------------------------------------------------------------
		84	Parameters:
		85	[in] Handle : The handle that identifies the device.
		86	[out] FWRel : Returns the firmware release of the device.
		87	-----------------------------------------------------------------------------
		88	Returns:
		89	An error code about the execution of the function.
		90	-----------------------------------------------------------------------------
		91	Description:
		92	Permits to read the firmware release loaded into the device.
		93	*/
		94	CAENVME_API
		95	CAENVME_BoardFWRelease(int32_t Handle, char *FWRel);
		96
		97	/*
		98	CAENVME_DriverRelease.
		99	-----------------------------------------------------------------------------
		100	Parameters:
		101	[in] Handle : The handle that identifies the device.
		102	[out] Rel : Returns the software release of the device driver
		103	-----------------------------------------------------------------------------
		104	Returns:
		105	An error code about the execution of the function.
		106	-----------------------------------------------------------------------------
		107	Description:
		108	Permits to read the software release of the device driver.
		109	*/
		110	CAENVME_API
		111	CAENVME_DriverRelease(int32_t Handle, char *Rel);
		112
		113	/*
		114	CAENVME_DeviceReset
		115	-----------------------------------------------------------------------------
		116	Parameters:
		117	[in] Handle : The handle that identifies the device.
		118	-----------------------------------------------------------------------------
		119	Returns:
		120	An error code about the execution of the function.
		121	-----------------------------------------------------------------------------
		122	Description:
		123	Permits to reset the device.
		124	Implemented for A2818, A2719, V2718 on Linux platform only
		125	*/
		126	CAENVME_API
		127	CAENVME_DeviceReset(int32_t dev);
		128
		129
		130	/*
		131	CAENVME_Init
		132	-----------------------------------------------------------------------------
		133	Parameters:
		134	[in] BdType : The model of the bridge (V1718/V2718).
		135	[in] Link : The link number (don't care for V1718).
		136	[in] BdNum : The board number in the link.
		137	[out] Handle : The handle that identifies the device.
		138	-----------------------------------------------------------------------------
		139	Returns:
		140	An error code about the execution of the function.
		141	-----------------------------------------------------------------------------
		142	Description:
		143	The function generates an opaque handle to identify a module
		144	attached to the PC. In the case of V1718 bridge it must be
		145	specified only the module index (BdNum) because the link is USB.
		146	In the case of V2718 it must be specified also the link because
		147	you can have some A2818 optical link inside the PC.
		148	*/
		149	CAENVME_API
		150	CAENVME_Init(CVBoardTypes BdType, short Link, short BdNum, int32_t *Handle);
		151
		152	/*
		153	CAENVME_End
		154	-----------------------------------------------------------------------------
		155	Parameters:
		156	[in] Handle : The handle that identifies the device.
		157	-----------------------------------------------------------------------------
		158	Returns:
		159	An error code about the execution of the function.
		160	-----------------------------------------------------------------------------
		161	Description:
		162	Notifies the library the end of work and free the allocated
		163	resources.
		164	*/
		165	CAENVME_API
		166	CAENVME_End(int32_t Handle);
		167
		168	/*
		169	CAENVME_ReadCycle
		170	-----------------------------------------------------------------------------
		171	Parameters:
		172	[in] Handle : The handle that identifies the device.
		173	[in] Address : The VME bus address.
		174	[out] Data : The data read from the VME bus.
		175	[in] AM : The address modifier (see CVAddressModifier enum).
		176	[in] DW : The data width.(see CVDataWidth enum).
		177	-----------------------------------------------------------------------------
		178	Returns:
		179	An error code about the execution of the function.
		180	-----------------------------------------------------------------------------
		181	Description:
		182	The function performs a single VME read cycle.
		183	*/
		184	CAENVME_API
		185	CAENVME_ReadCycle(int32_t Handle, uint32_t Address, void *Data,
		186	CVAddressModifier AM, CVDataWidth DW);
		187
		188	/*
		189	CAENVME_RMWCycle
		190	-----------------------------------------------------------------------------
		191	Parameters:
		192	[in] Handle : The handle that identifies the device.
		193	[in] Address: The VME bus address.
		194	[in/out] Data : The data read and then written to the VME bus.
		195	[in] AM : The address modifier (see CVAddressModifier enum).
		196	[in] DW : The data width.(see CVDataWidth enum).
		197	-----------------------------------------------------------------------------
		198	Returns:
		199	An error code about the execution of the function.
		200	-----------------------------------------------------------------------------
		201	Description:
		202	The function performs a Read-Modify-Write cycle. The Data parameter
		203	is bidirectional: it is used to write the value to the VME bus and to
		204	return the value read.
		205	*/
		206	CAENVME_API
		207	CAENVME_RMWCycle(int32_t Handle, uint32_t Address, void *Data,
		208	CVAddressModifier AM, CVDataWidth DW);
		209
		210	/*
		211	CAENVME_WriteCycle
		212	-----------------------------------------------------------------------------
		213	Parameters:
		214	[in] Handle : The handle that identifies the device.
		215	[in] Address : The VME bus address.
		216	[in] Data : The data written to the VME bus.
		217	[in] AM : The address modifier (see CVAddressModifier enum).
		218	[in] DW : The data width.(see CVDataWidth enum).
		219	-----------------------------------------------------------------------------
		220	Returns:
		221	An error code about the execution of the function.
		222	-----------------------------------------------------------------------------
		223	Description:
		224	The function performs a single VME write cycle.
		225	*/
		226	CAENVME_API
		227	CAENVME_WriteCycle(int32_t Handle, uint32_t Address, void *Data,
		228	CVAddressModifier AM, CVDataWidth DW);
		229
		230	/*
		231	CAENVME_MultiRead (Ver. 2.2)
		232	-----------------------------------------------------------------------------
		233	Parameters:
		234	[in] Handle : The handle that identifies the device.
		235	[in] Addrs : The VME bus addresses.
		236	[out] Buffer : The data read from the VME bus.
		237	[in] NCycles : The number of read cycles to perform.
		238	[in] AMs : The address modifiers (see CVAddressModifier enum).
		239	[in] DWs : The data widths.(see CVDataWidth enum).
		240	[out] ECs : The error codes relaive to each cycle.
		241	-----------------------------------------------------------------------------
		242	Returns:
		243	An error code about the execution of the function.
		244	-----------------------------------------------------------------------------
		245	Description:
		246	The function performs a block of single VME read cycles.
		247	*/
		248	CAENVME_API
		249	CAENVME_MultiRead(int32_t Handle, uint32_t Addrs, uint32_t Buffer,
		250	int NCycles, CVAddressModifier AMs, CVDataWidth DWs, CVErrorCodes *ECs);
		251
		252	/*
		253	CAENVME_MultiWrite (Ver. 2.2)
		254	-----------------------------------------------------------------------------
		255	Parameters:
		256	[in] Handle : The handle that identifies the device.
		257	[in] Addrs : The VME bus addresses.
		258	[in] Buffer : The data to write to the VME bus.
		259	[in] NCycles : The number of read cycles to perform.
		260	[in] AMs : The address modifiers (see CVAddressModifier enum).
		261	[in] DWs : The data widths.(see CVDataWidth enum).
		262	[out] ECs : The error codes relaive to each cycle.
		263	-----------------------------------------------------------------------------
		264	Returns:
		265	An error code about the execution of the function.
		266	-----------------------------------------------------------------------------
		267	Description:
		268	The function performs a block of single VME write cycles.
		269	*/
		270	CAENVME_API
		271	CAENVME_MultiWrite(int32_t Handle, uint32_t Addrs, uint32_t Buffer,
		272	int NCycles, CVAddressModifier AMs, CVDataWidth DWs, CVErrorCodes *ECs);
		273
		274	/*
		275	CAENVME_BLTReadCycle
		276	-----------------------------------------------------------------------------
		277	Parameters:
		278	[in] Handle : The handle that identifies the device.
		279	[in] Address : The VME bus address.
		280	[out] Buffer : The data read from the VME bus.
		281	[in] Size : The size of the transfer in bytes.
		282	[in] AM : The address modifier (see CVAddressModifier enum).
		283	[in] DW : The data width.(see CVDataWidth enum).
		284	[out] count : The number of bytes transferred.
		285	-----------------------------------------------------------------------------
		286	Returns:
		287	An error code about the execution of the function.
		288	-----------------------------------------------------------------------------
		289	Description:
		290	The function performs a VME block transfer read cycle. It can be used to
		291	perform MBLT transfers using 64 bit data width.
		292	*/
		293	CAENVME_API
		294	CAENVME_BLTReadCycle(int32_t Handle, uint32_t Address, void *Buffer,
		295	int Size, CVAddressModifier AM, CVDataWidth DW, int *count);
		296
		297	/*
		298	Ver. 2.3 - New function
		299
		300	CAENVME_FIFOBLTReadCycle
		301	-----------------------------------------------------------------------------
		302	Parameters:
		303	[in] Handle : The handle that identifies the device.
		304	[in] Address : The VME bus address.
		305	[out] Buffer : The data read from the VME bus.
		306	[in] Size : The size of the transfer in bytes.
		307	[in] AM : The address modifier (see CVAddressModifier enum).
		308	[in] DW : The data width.(see CVDataWidth enum).
		309	[out] count : The number of bytes transferred.
		310	-----------------------------------------------------------------------------
		311	Returns:
		312	An error code about the execution of the function.
		313	-----------------------------------------------------------------------------
		314	Description:
		315	The function performs a VME block transfer read cycle. It can be used to
		316	perform MBLT transfers using 64 bit data width. The Address is not
		317	incremented on the VMEBus during the cycle.
		318	*/
		319	CAENVME_API
		320	CAENVME_FIFOBLTReadCycle(int32_t Handle, uint32_t Address, void *Buffer,
		321	int Size, CVAddressModifier AM, CVDataWidth DW, int *count);
		322
		323	/*
		324	CAENVME_MBLTReadCycle
		325	-----------------------------------------------------------------------------
		326	Parameters:
		327	[in] Handle : The handle that identifies the device.
		328	[in] Address : The VME bus address.
		329	[out] Buffer : The data read from the VME bus.
		330	[in] Size : The size of the transfer in bytes.
		331	[in] AM : The address modifier (see CVAddressModifier enum).
		332	[out] count : The number of bytes transferred.
		333	-----------------------------------------------------------------------------
		334	Returns:
		335	An error code about the execution of the function.
		336	-----------------------------------------------------------------------------
		337	Description:
		338	The function performs a VME multiplexed block transfer read cycle.
		339	*/
		340	CAENVME_API
		341	CAENVME_MBLTReadCycle(int32_t Handle, uint32_t Address, void *Buffer,
		342	int Size, CVAddressModifier AM, int *count);
		343
		344	/*
		345	Ver. 2.3 - New function
		346
		347	CAENVME_FIFOMBLTReadCycle
		348	-----------------------------------------------------------------------------
		349	Parameters:
		350	[in] Handle : The handle that identifies the device.
		351	[in] Address : The VME bus address.
		352	[out] Buffer : The data read from the VME bus.
		353	[in] Size : The size of the transfer in bytes.
		354	[in] AM : The address modifier (see CVAddressModifier enum).
		355	[out] count : The number of bytes transferred.
		356	-----------------------------------------------------------------------------
		357	Returns:
		358	An error code about the execution of the function.
		359	-----------------------------------------------------------------------------
		360	Description:
		361	The function performs a VME multiplexed block transfer read cycle.
		362	The Address is not incremented on the VMEBus during the cycle.
		363	*/
		364	CAENVME_API
		365	CAENVME_FIFOMBLTReadCycle(int32_t Handle, uint32_t Address, void *Buffer,
		366	int Size, CVAddressModifier AM, int *count);
		367
		368	/*
		369	CAENVME_BLTWriteCycle
		370	-----------------------------------------------------------------------------
		371	Parameters:
		372	[in] Handle : The handle that identifies the device.
		373	[in] Address : The VME bus address.
		374	[in] Buffer : The data to be written to the VME bus.
		375	[in] Size : The size of the transfer in bytes.
		376	[in] AM : The address modifier (see CVAddressModifier enum).
		377	[in] DW : The data width.(see CVDataWidth enum).
		378	[out] count : The number of bytes transferred.
		379	-----------------------------------------------------------------------------
		380	Returns:
		381	An error code about the execution of the function.
		382	-----------------------------------------------------------------------------
		383	Description:
		384	The function performs a VME block transfer write cycle.
		385	*/
		386	CAENVME_API
		387	CAENVME_BLTWriteCycle(int32_t Handle, uint32_t Address, void *Buffer,
		388	int size, CVAddressModifier AM, CVDataWidth DW, int *count);
		389
		390	/*
		391	Ver. 2.3 - New function
		392
		393	CAENVME_FIFOBLTWriteCycle
		394	-----------------------------------------------------------------------------
		395	Parameters:
		396	[in] Handle : The handle that identifies the device.
		397	[in] Address : The VME bus address.
		398	[in] Buffer : The data to be written to the VME bus.
		399	[in] Size : The size of the transfer in bytes.
		400	[in] AM : The address modifier (see CVAddressModifier enum).
		401	[in] DW : The data width.(see CVDataWidth enum).
		402	[out] count : The number of bytes transferred.
		403	-----------------------------------------------------------------------------
		404	Returns:
		405	An error code about the execution of the function.
		406	-----------------------------------------------------------------------------
		407	Description:
		408	The function performs a VME block transfer write cycle. The address
		409	is not incremented during the cycle.
		410	*/
		411	CAENVME_API
		412	CAENVME_FIFOBLTWriteCycle(int32_t Handle, uint32_t Address, void *Buffer,
		413	int size, CVAddressModifier AM, CVDataWidth DW, int *count);
		414
		415	/*
		416	CAENVME_MBLTWriteCycle
		417	-----------------------------------------------------------------------------
		418	Parameters:
		419	[in] Handle : The handle that identifies the device.
		420	[in] Address : The VME bus address.
		421	[in] Buffer : The data to be written to the VME bus.
		422	[in] Size : The size of the transfer in bytes.
		423	[in] AM : The address modifier (see CVAddressModifier enum).
		424	[out] count : The number of bytes transferred.
		425	-----------------------------------------------------------------------------
		426	Returns:
		427	An error code about the execution of the function.
		428	-----------------------------------------------------------------------------
		429	Description:
		430	The function performs a VME multiplexed block transfer write cycle.
		431	*/
		432	CAENVME_API
		433	CAENVME_MBLTWriteCycle(int32_t Handle, uint32_t Address, void *Buffer,
		434	int size, CVAddressModifier AM, int *count);
		435
		436	/*
		437	Ver. 2.3 - New function
		438
		439	CAENVME_FIFOMBLTWriteCycle
		440	-----------------------------------------------------------------------------
		441	Parameters:
		442	[in] Handle : The handle that identifies the device.
		443	[in] Address : The VME bus address.
		444	[in] Buffer : The data to be written to the VME bus.
		445	[in] Size : The size of the transfer in bytes.
		446	[in] AM : The address modifier (see CVAddressModifier enum).
		447	[out] count : The number of bytes transferred.
		448	-----------------------------------------------------------------------------
		449	Returns:
		450	An error code about the execution of the function.
		451	-----------------------------------------------------------------------------
		452	Description:
		453	The function performs a VME multiplexed block transfer write cycle.
		454	The address is not incremented during the cycle.
		455	*/
		456	CAENVME_API
		457	CAENVME_FIFOMBLTWriteCycle(int32_t Handle, uint32_t Address, void *Buffer,
		458	int size, CVAddressModifier AM, int *count);
		459
		460	/*
		461	CAENVME_ADOCycle
		462	-----------------------------------------------------------------------------
		463	Parameters:
		464	[in] Handle : The handle that identifies the device.
		465	[in] Address : The VME bus address.
		466	[in] AM : The address modifier (see CVAddressModifier enum).
		467	-----------------------------------------------------------------------------
		468	Returns:
		469	An error code about the execution of the function.
		470	-----------------------------------------------------------------------------
		471	Description:
		472	The function performs a VME address only cycle. It can be used to
		473	perform MBLT transfers using 64 bit data width.
		474	*/
		475	CAENVME_API
		476	CAENVME_ADOCycle(int32_t Handle, uint32_t Address, CVAddressModifier AM);
		477
		478	/*
		479	CAENVME_ADOHCycle
		480	-----------------------------------------------------------------------------
		481	Parameters:
		482	[in] Handle : The handle that identifies the device.
		483	[in] Address : The VME bus address.
		484	[in] AM : The address modifier (see CVAddressModifier enum).
		485	-----------------------------------------------------------------------------
		486	Returns:
		487	An error code about the execution of the function.
		488	-----------------------------------------------------------------------------
		489	Description:
		490	The function performs a VME address only with handshake cycle.
		491	*/
		492	CAENVME_API
		493	CAENVME_ADOHCycle(int32_t Handle, uint32_t Address, CVAddressModifier AM);
		494
		495	/*
		496	CAENVME_IACKCycle
		497	-----------------------------------------------------------------------------
		498	Parameters:
		499	[in] Handle : The handle that identifies the device.
		500	[in] Level : The IRQ level to acknowledge (see CVIRQLevels enum).
		501	[in] DW : The data width.(see CVDataWidth enum).
		502	-----------------------------------------------------------------------------
		503	Returns:
		504	An error code about the execution of the function.
		505	-----------------------------------------------------------------------------
		506	Description:
		507	The function performs a VME interrupt acknowledge cycle.
		508	*/
		509	CAENVME_API
		510	CAENVME_IACKCycle(int32_t Handle, CVIRQLevels Level, void *Vector, CVDataWidth DW);
		511
		512	/*
		513	CAENVME_IRQCheck
		514	-----------------------------------------------------------------------------
		515	Parameters:
		516	[in] Handle : The handle that identifies the device.
		517	[out] Mask : A bit-mask indicating the active IRQ lines.
		518	-----------------------------------------------------------------------------
		519	Returns:
		520	An error code about the execution of the function.
		521	-----------------------------------------------------------------------------
		522	Description:
		523	The function returns a bit mask indicating the active IRQ lines.
		524	*/
		525	CAENVME_API
		526	CAENVME_IRQCheck(int32_t Handle, CAEN_BYTE *Mask);
		527
		528	/*
		529	CAENVME_IRQEnable
		530	-----------------------------------------------------------------------------
		531	Parameters:
		532	[in] Handle : The handle that identifies the device.
		533	[in] Mask : A bit-mask indicating the IRQ lines.
		534	-----------------------------------------------------------------------------
		535	Returns:
		536	An error code about the execution of the function.
		537	-----------------------------------------------------------------------------
		538	Description:
		539	The function enables the IRQ lines specified by Mask.
		540	*/
		541	CAENVME_API
		542	CAENVME_IRQEnable(int32_t Handle, uint32_t Mask);
		543
		544	/*
		545	CAENVME_IRQDisable
		546	-----------------------------------------------------------------------------
		547	Parameters:
		548	[in] Handle : The handle that identifies the device.
		549	[in] Mask : A bit-mask indicating the IRQ lines.
		550	-----------------------------------------------------------------------------
		551	Returns:
		552	An error code about the execution of the function.
		553	-----------------------------------------------------------------------------
		554	Description:
		555	The function disables the IRQ lines specified by Mask.
		556	*/
		557	CAENVME_API
		558	CAENVME_IRQDisable(int32_t Handle, uint32_t Mask);
		559
		560	/*
		561	CAENVME_IRQWait
		562	-----------------------------------------------------------------------------
		563	Parameters:
		564	[in] Handle : The handle that identifies the device.
		565	[in] Mask : A bit-mask indicating the IRQ lines.
		566	[in] Timeout : Timeout in milliseconds.
		567	-----------------------------------------------------------------------------
		568	Returns:
		569	An error code about the execution of the function.
		570	-----------------------------------------------------------------------------
		571	Description:
		572	The function wait the IRQ lines specified by Mask until one of
		573	them raise or timeout expires.
		574	*/
		575	CAENVME_API
		576	CAENVME_IRQWait(int32_t Handle, uint32_t Mask, uint32_t Timeout);
		577
		578	/*
		579	CAENVME_SetPulserConf
		580	-----------------------------------------------------------------------------
		581	Parameters:
		582	[in] Handle : The handle that identifies the device.
		583	[in] PulSel : The pulser to configure (see CVPulserSelect enum).
		584	[in] Period : The period of the pulse in time units.
		585	[in] Width : The width of the pulse in time units.
		586	[in] Unit : The time unit for the pulser configuration (see
		587	CVTimeUnits enum).
		588	[in] PulseNo : The number of pulses to generate (0 = infinite).
		589	[in] Start : The source signal to start the pulse burst (see
		590	CVIOSources enum).
		591	[in] Reset : The source signal to stop the pulse burst (see
		592	CVIOSources enum).
		593	-----------------------------------------------------------------------------
		594	Returns:
		595	An error code about the execution of the function.
		596	-----------------------------------------------------------------------------
		597	Description:
		598	The function permits to configure the pulsers. All the timing parameters
		599	are expressed in the time units specified. The start signal source can be
		600	one of: front panel button or software (cvManualSW), input signal 0
		601	(cvInputSrc0),input signal 1 (cvInputSrc1) or input coincidence
		602	(cvCoincidence). The reset signal source can be: front panel button or
		603	software (cvManualSW) or, for pulser A the input signal 0 (cvInputSrc0),
		604	for pulser B the input signal 1 (cvInputSrc1).
		605	*/
		606	CAENVME_API
		607	CAENVME_SetPulserConf(int32_t Handle, CVPulserSelect PulSel, unsigned char Period,
		608	unsigned char Width, CVTimeUnits Unit, unsigned char PulseNo,
		609	CVIOSources Start, CVIOSources Reset);
		610
		611	/*
		612	CAENVME_SetScalerConf
		613	-----------------------------------------------------------------------------
		614	Parameters:
		615	[in] Handle : The handle that identifies the device.
		616	[in] Limit : The counter limit for the scaler.
		617	[in] AutoReset : Enable/disable the counter auto reset.
		618	[in] Hit : The source signal for the signal to count (see
		619	CVIOSources enum).
		620	[in] Gate : The source signal for the gate (see CVIOSources enum).
		621	[in] Reset : The source signal to stop the counter (see
		622	CVIOSources enum).
		623	-----------------------------------------------------------------------------
		624	Returns:
		625	An error code about the execution of the function.
		626	-----------------------------------------------------------------------------
		627	Description:
		628	The function permits to configure the scaler. Limit range is 0 - 1024
		629	(10 bit). The hit signal source can be: input signal 0 (cvInputSrc0)
		630	or input coincidence (cvCoincidence). The gate signal source can be:
		631	front panel button or software (cvManualSW) or input signal 1
		632	(cvInputSrc1). The reset signal source can be: front panel button or
		633	software (cvManualSW) or input signal 1 (cvInputSrc1).
		634	*/
		635	CAENVME_API
		636	CAENVME_SetScalerConf(int32_t Handle, short Limit, short AutoReset,
		637	CVIOSources Hit, CVIOSources Gate, CVIOSources Reset);
		638
		639	/*
		640	CAENVME_SetOutputConf
		641	-----------------------------------------------------------------------------
		642	Parameters:
		643	[in] Handle : The handle that identifies the device.
		644	[in] OutSel : The output line to configure (see CVOutputSelect
		645	enum).
		646	[in] OutPol : The output line polarity (see CVIOPolarity enum).
		647	[in] LEDPol : The output LED polarity (see CVLEDPolarity enum).
		648	[in] Source : The source signal to propagate to the output line
		649	(see CVIOSources enum).
		650	-----------------------------------------------------------------------------
		651	Returns:
		652	An error code about the execution of the function.
		653	-----------------------------------------------------------------------------
		654	Description:
		655	The function permits to configure the output lines of the module. It
		656	can be specified the polarity for the line and for the LED. The
		657	output line source depends on the line as figured out by the
		658	following table:
		659
		660	+-----------------------------------------------------------+
		661	! S O U R C E S E L E C T I O N !
		662	+--------------+---------------+---------------+------------+
		663	! cvVMESignals ! cvCoincidence ! cvMiscSignals ! cvManualSW !
		664	+---+---+--------------+---------------+---------------+------------+
		665	! ! 0 ! DS ! Input Coinc. ! Pulser A ! Manual/SW !
		666	! O +---+--------------+---------------+---------------+------------+
		667	! U ! 1 ! AS ! Input Coinc. ! Pulser A ! Manual/SW !
		668	! T +---+--------------+---------------+---------------+------------+
		669	! P ! 2 ! DTACK ! Input Coinc. ! Pulser B ! Manual/SW !
		670	! U +---+--------------+---------------+---------------+------------+
		671	! T ! 3 ! BERR ! Input Coinc. ! Pulser B ! Manual/SW !
		672	! +---+--------------+---------------+---------------+------------+
		673	! ! 4 ! LMON ! Input Coinc. ! Scaler end ! Manual/SW !
		674	+---+---+--------------+---------------+---------------+------------+
		675	*/
		676	CAENVME_API
		677	CAENVME_SetOutputConf(int32_t Handle, CVOutputSelect OutSel, CVIOPolarity OutPol,
		678	CVLEDPolarity LEDPol, CVIOSources Source);
		679
		680	/*
		681	CAENVME_SetInputConf
		682	-----------------------------------------------------------------------------
		683	Parameters:
		684	[in] Handle : The handle that identifies the device.
		685	[in] InSel : The input line to configure (see CVInputSelect enum).
		686	[in] InPol : The input line polarity (see CVIOPolarity enum).
		687	[in] LEDPol : The output LED polarity (see CVLEDPolarity enum).
		688	-----------------------------------------------------------------------------
		689	Returns:
		690	An error code about the execution of the function.
		691	-----------------------------------------------------------------------------
		692	Description:
		693	The function permits to configure the input lines of the module. It
		694	ca be specified the polarity for the line and for the LED.
		695	*/
		696	CAENVME_API
		697	CAENVME_SetInputConf(int32_t Handle, CVInputSelect InSel, CVIOPolarity InPol,
		698	CVLEDPolarity LEDPol);
		699
		700	/*
		701	CAENVME_GetPulserConf
		702	-----------------------------------------------------------------------------
		703	Parameters:
		704	[in] Handle : The handle that identifies the device.
		705	[in] PulSel : The pulser to configure (see CVPulserSelect enum).
		706	[out] Period : The period of the pulse in time units.
		707	[out] Width : The width of the pulse in time units.
		708	[out] Unit : The time unit for the pulser configuration (see
		709	CVTimeUnits enum).
		710	[out] PulseNo : The number of pulses to generate (0 = infinite).
		711	[out] Start : The source signal to start the pulse burst (see
		712	CVIOSources enum).
		713	[out] Reset : The source signal to stop the pulse burst (see
		714	CVIOSources enum).
		715	-----------------------------------------------------------------------------
		716	Returns:
		717	An error code about the execution of the function.
		718	-----------------------------------------------------------------------------
		719	Description:
		720	The function permits to read the configuration of the pulsers.
		721	*/
		722	CAENVME_API
		723	CAENVME_GetPulserConf(int32_t Handle, CVPulserSelect PulSel, unsigned char *Period,
		724	unsigned char Width, CVTimeUnits Unit, unsigned char *PulseNo,
		725	CVIOSources Start, CVIOSources Reset);
		726
		727	/*
		728	CAENVME_GetScalerConf
		729	-----------------------------------------------------------------------------
		730	Parameters:
		731	[in] Handle : The handle that identifies the device.
		732	[out] Limit : The counter limit for the scaler.
		733	[out] AutoReset : The auto reset configuration.
		734	[out] Hit : The source signal for the signal to count (see
		735	CVIOSources enum).
		736	[out] Gate : The source signal for the gate (see CVIOSources enum).
		737	[out] Reset : The source signal to stop the counter (see
		738	CVIOSources enum).
		739	-----------------------------------------------------------------------------
		740	Returns:
		741	An error code about the execution of the function.
		742	-----------------------------------------------------------------------------
		743	Description:
		744	The function permits to read the configuration of the scaler.
		745	*/
		746	CAENVME_API
		747	CAENVME_GetScalerConf(int32_t Handle, short Limit, short AutoReset,
		748	CVIOSources Hit, CVIOSources Gate, CVIOSources *Reset);
		749
		750
		751	/*
		752	CAENVME_SetOutputConf
		753	-----------------------------------------------------------------------------
		754	Parameters:
		755	[in] Handle : The handle that identifies the device.
		756	[in] OutSel : The output line to configure (see CVOutputSelect enum).
		757	[out] OutPol : The output line polarity (see CVIOPolarity enum).
		758	[out] LEDPol : The output LED polarity (see CVLEDPolarity enum).
		759	[out] Source : The source signal to propagate to the output line (see
		760	CVIOSources enum).
		761	-----------------------------------------------------------------------------
		762	Returns:
		763	An error code about the execution of the function.
		764	-----------------------------------------------------------------------------
		765	Description:
		766	The function permits to read the configuration of the output lines.
		767	*/
		768	CAENVME_API
		769	CAENVME_GetOutputConf(int32_t Handle, CVOutputSelect OutSel, CVIOPolarity *OutPol,
		770	CVLEDPolarity LEDPol, CVIOSources Source);
		771
		772	/*
		773	CAENVME_SetInputConf
		774	-----------------------------------------------------------------------------
		775	Parameters:
		776	[in] Handle : The handle that identifies the device.
		777	[in] InSel : The input line to configure (see CVInputSelect enum).
		778	[out] InPol : The input line polarity (see CVIOPolarity enum).
		779	[out] LEDPol : The output LED polarity (see CVLEDPolarity enum).
		780	-----------------------------------------------------------------------------
		781	Returns:
		782	An error code about the execution of the function.
		783	-----------------------------------------------------------------------------
		784	Description:
		785	The function permits to read the configuration of the input lines.
		786	*/
		787	CAENVME_API
		788	CAENVME_GetInputConf(int32_t Handle, CVInputSelect InSel, CVIOPolarity *InPol,
		789	CVLEDPolarity *LEDPol);
		790
		791	/*
		792	CAENVME_ReadRegister
		793	-----------------------------------------------------------------------------
		794	Parameters:
		795	[in] Handle : The handle that identifies the device.
		796	[in] Reg : The internal register to read (see CVRegisters enum).
		797	[out] Data : The data read from the module.
		798	-----------------------------------------------------------------------------
		799	Returns:
		800	An error code about the execution of the function.
		801	-----------------------------------------------------------------------------
		802	Description:
		803	The function permits to read all internal registers.
		804	*/
		805	CAENVME_API
		806	CAENVME_ReadRegister(int32_t Handle, CVRegisters Reg, unsigned int *Data);
		807
		808	/*
		809	CAENVME_WriteRegister
		810	-----------------------------------------------------------------------------
		811	Parameters:
		812	[in] Handle : The handle that identifies the device.
		813	[in] Reg : The internal register to read (see CVRegisters enum).
		814	[in] Data : The data to be written to the module.
		815	-----------------------------------------------------------------------------
		816	Returns:
		817	An error code about the execution of the function.
		818	-----------------------------------------------------------------------------
		819	Description:
		820	The function permits to write to all internal registers.
		821	*/
		822	CAENVME_API
		823	CAENVME_WriteRegister(int32_t Handle, CVRegisters Reg, unsigned int Data);
		824
		825	/*
		826	CAENVME_SetOutputRegister
		827	-----------------------------------------------------------------------------
		828	Parameters:
		829	[in] Handle : The handle that identifies the device.
		830	[in] Mask : The lines to be set.
		831	-----------------------------------------------------------------------------
		832	Returns:
		833	An error code about the execution of the function.
		834	-----------------------------------------------------------------------------
		835	Description:
		836	The function sets the lines specified. Refer the CVOutputRegisterBits
		837	enum to compose and decoding the bit mask.
		838	*/
		839	CAENVME_API
		840	CAENVME_SetOutputRegister(int32_t Handle, unsigned short Mask);
		841
		842	/*
		843	CAENVME_ClearOutputRegister
		844	-----------------------------------------------------------------------------
		845	Parameters:
		846	[in] Handle : The handle that identifies the device.
		847	[in] Mask : The IRQ lines to be cleared.
		848	-----------------------------------------------------------------------------
		849	Returns:
		850	An error code about the execution of the function.
		851	-----------------------------------------------------------------------------
		852	Description:
		853	The function clears the lines specified. Refer the CVOutputRegisterBits
		854	enum to compose and decoding the bit mask.
		855	*/
		856	CAENVME_API
		857	CAENVME_ClearOutputRegister(int32_t Handle, unsigned short Mask);
		858
		859	/*
		860	CAENVME_PulseOutputRegister
		861	-----------------------------------------------------------------------------
		862	Parameters:
		863	[in] Handle : The handle that identifies the device.
		864	[in] Mask : The lines to be pulsed.
		865	-----------------------------------------------------------------------------
		866	Returns:
		867	An error code about the execution of the function.
		868	-----------------------------------------------------------------------------
		869	Description:
		870	The function produces a pulse with the lines specified by setting and
		871	then clearing them. Refer the CVOutputRegisterBits enum to compose and
		872	decoding the bit mask.
		873	*/
		874	CAENVME_API
		875	CAENVME_PulseOutputRegister(int32_t Handle, unsigned short Mask);
		876
		877	/*
		878	CAENVME_ReadDisplay
		879	-----------------------------------------------------------------------------
		880	Parameters:
		881	[in] Handle : The handle that identifies the device.
		882	[out] Value : The values read from the module (see CVDisplay enum).
		883	-----------------------------------------------------------------------------
		884	Returns:
		885	An error code about the execution of the function.
		886	-----------------------------------------------------------------------------
		887	Description:
		888	The function reads the VME data display on the front panel of the module.
		889	Refer to the CVDisplay data type definition and comments to decode the
		890	value returned.
		891	*/
		892	CAENVME_API
		893	CAENVME_ReadDisplay(int32_t Handle, CVDisplay *Value);
		894
		895	/*
		896	CAENVME_SetArbiterType
		897	-----------------------------------------------------------------------------
		898	Parameters:
		899	[in] Handle : The handle that identifies the device.
		900	[in] Value : The type of VME bus arbitration to implement (see
		901	CVArbiterTypes enum).
		902	-----------------------------------------------------------------------------
		903	Returns:
		904	An error code about the execution of the function.
		905	-----------------------------------------------------------------------------
		906	Description:
		907	The function sets the behaviour of the VME bus arbiter on the module.
		908	*/
		909	CAENVME_API
		910	CAENVME_SetArbiterType(int32_t Handle, CVArbiterTypes Value);
		911
		912	/*
		913	CAENVME_SetRequesterType
		914	-----------------------------------------------------------------------------
		915	Parameters:
		916	[in] Handle : The handle that identifies the device.
		917	[in] Value : The type of VME bus requester to implement (see
		918	CVRequesterTypes enum).
		919	-----------------------------------------------------------------------------
		920	Returns:
		921	An error code about the execution of the function.
		922	-----------------------------------------------------------------------------
		923	Description:
		924	The function sets the behaviour of the VME bus requester on the module.
		925	*/
		926	CAENVME_API
		927	CAENVME_SetRequesterType(int32_t Handle, CVRequesterTypes Value);
		928
		929	/*
		930	CAENVME_SetReleaseType
		931	-----------------------------------------------------------------------------
		932	Parameters:
		933	[in] Handle : The handle that identifies the device.
		934	[in] Value : The type of VME bus release policy to implement (see
		935	CVReleaseTypes enum).
		936	-----------------------------------------------------------------------------
		937	Returns:
		938	An error code about the execution of the function.
		939	-----------------------------------------------------------------------------
		940	Description:
		941	The function sets the release policy of the VME bus on the module.
		942	*/
		943	CAENVME_API
		944	CAENVME_SetReleaseType(int32_t Handle, CVReleaseTypes Value);
		945
		946	/*
		947	CAENVME_SetBusReqLevel
		948	-----------------------------------------------------------------------------
		949	Parameters:
		950	[in] Handle : The handle that identifies the device.
		951	[in] Value : The type of VME bus requester priority level to set
		952	(see CVBusReqLevels enum).
		953	-----------------------------------------------------------------------------
		954	Returns:
		955	An error code about the execution of the function.
		956	-----------------------------------------------------------------------------
		957	Description:
		958	The function sets the specified VME bus requester priority level on
		959	the module.
		960	*/
		961	CAENVME_API
		962	CAENVME_SetBusReqLevel(int32_t Handle, CVBusReqLevels Value);
		963
		964	/*
		965	CAENVME_SetTimeout
		966	-----------------------------------------------------------------------------
		967	Parameters:
		968	[in] Handle : The handle that identifies the device.
		969	[in] Value : The value of VME bus timeout to set (see
		970	CVVMETimeouts enum).
		971	-----------------------------------------------------------------------------
		972	Returns:
		973	An error code about the execution of the function.
		974	-----------------------------------------------------------------------------
		975	Description:
		976	The function sets the specified VME bus timeout on the module.
		977	*/
		978	CAENVME_API
		979	CAENVME_SetTimeout(int32_t Handle, CVVMETimeouts Value);
		980
		981	/*
		982	CAENVME_SetLocationMonitor
		983	-----------------------------------------------------------------------------
		984	Parameters:
		985	[in] Handle : The handle that identifies the device.
		986	[in] Address : The addres to be monitored.
		987	[in] Write : Flag to specify read or write cycle types.
		988	[in] Lword : Flag to specify long word cycle type.
		989	[in] Iack : Flag to specify interrupt acknowledge cycle type.
		990
		991	-----------------------------------------------------------------------------
		992	Returns:
		993	An error code about the execution of the function.
		994	-----------------------------------------------------------------------------
		995	Description:
		996	The function sets the Location Monitor.
		997	*/
		998	CAENVME_API
		999	CAENVME_SetLocationMonitor(int32_t Handle, uint32_t Address, CVAddressModifier Am,
		1000	short Write, short Lword, short Iack);
		1001	/*
		1002	CAENVME_SetFIFOMode
		1003	-----------------------------------------------------------------------------
		1004	Parameters:
		1005	[in] Handle : The handle that identifies the device.
		1006	[in] Value : Enable/disable the FIFO mode.
		1007	-----------------------------------------------------------------------------
		1008	Returns:
		1009	An error code about the execution of the function.
		1010	-----------------------------------------------------------------------------
		1011	Description:
		1012	The function enables/disables the auto increment of the VME addresses
		1013	during the block transfer cycles. With the FIFO mode enabled the
		1014	addresses are not incremented.
		1015	*/
		1016	CAENVME_API
		1017	CAENVME_SetFIFOMode(int32_t Handle, short Value);
		1018
		1019	/*
		1020	CAENVME_GetArbiterType
		1021	-----------------------------------------------------------------------------
		1022	Parameters:
		1023	[in] Handle : The handle that identifies the device.
		1024	[out] Value : The type of VME bus arbitration implemented (see
		1025	CVArbiterTypes enum).
		1026	-----------------------------------------------------------------------------
		1027	Returns:
		1028	An error code about the execution of the function.
		1029	-----------------------------------------------------------------------------
		1030	Description:
		1031	The function get the type of VME bus arbiter implemented on the module.
		1032	*/
		1033	CAENVME_API
		1034	CAENVME_GetArbiterType(int32_t Handle, CVArbiterTypes *Value);
		1035
		1036	/*
		1037	CAENVME_GetRequesterType
		1038	-----------------------------------------------------------------------------
		1039	Parameters:
		1040	[in] Handle : The handle that identifies the device.
		1041	[out] Value : The type of VME bus requester implemented (see
		1042	CVRequesterTypes enum).
		1043	-----------------------------------------------------------------------------
		1044	Returns:
		1045	An error code about the execution of the function.
		1046	-----------------------------------------------------------------------------
		1047	Description:
		1048	The function get the type of VME bus requester implemented on the module.
		1049	*/
		1050	CAENVME_API
		1051	CAENVME_GetRequesterType(int32_t Handle, CVRequesterTypes *Value);
		1052
		1053	/*
		1054	CAENVME_GetReleaseType
		1055	-----------------------------------------------------------------------------
		1056	Parameters:
		1057	[in] Handle : The handle that identifies the device.
		1058	[out] Value : The type of VME bus release policy implemented (see
		1059	CVReleaseTypes enum).
		1060	-----------------------------------------------------------------------------
		1061	Returns:
		1062	An error code about the execution of the function.
		1063	-----------------------------------------------------------------------------
		1064	Description:
		1065	The function get the type of VME bus release implemented on the module.
		1066	*/
		1067	CAENVME_API
		1068	CAENVME_GetReleaseType(int32_t Handle, CVReleaseTypes *Value);
		1069
		1070	/*
		1071	CAENVME_GetBusReqLevel
		1072	-----------------------------------------------------------------------------
		1073	Parameters:
		1074	[in] Handle : The handle that identifies the device.
		1075	[out] Value : The type of VME bus requester priority level (see
		1076	CVBusReqLevels enum).
		1077	-----------------------------------------------------------------------------
		1078	Returns:
		1079	An error code about the execution of the function.
		1080	-----------------------------------------------------------------------------
		1081	Description:
		1082	The function reads the specified VME bus requester priority level on
		1083	the module.
		1084	*/
		1085	CAENVME_API
		1086	CAENVME_GetBusReqLevel(int32_t Handle, CVBusReqLevels *Value);
		1087
		1088	/*
		1089	CAENVME_GetTimeout
		1090	-----------------------------------------------------------------------------
		1091	Parameters:
		1092	[in] Handle : The handle that identifies the device.
		1093	[out] Value : The value of VME bus timeout (see CVVMETimeouts enum).
		1094	-----------------------------------------------------------------------------
		1095	Returns:
		1096	An error code about the execution of the function.
		1097	-----------------------------------------------------------------------------
		1098	Description:
		1099	The function sets the specified VME bus timeout on the module.
		1100	*/
		1101	CAENVME_API
		1102	CAENVME_GetTimeout(int32_t Handle, CVVMETimeouts *Value);
		1103
		1104	/*
		1105	CAENVME_GetFIFOMode
		1106	-----------------------------------------------------------------------------
		1107	Parameters:
		1108	[in] Handle : The handle that identifies the device.
		1109	[out] Value : The FIFO mode read setting.
		1110	-----------------------------------------------------------------------------
		1111	Returns:
		1112	An error code about the execution of the function.
		1113	-----------------------------------------------------------------------------
		1114	Description:
		1115	The function read if the auto increment of the VME addresses during the
		1116	block transfer cycles is enabled (0) or disabled (!=0).
		1117	*/
		1118	CAENVME_API
		1119	CAENVME_GetFIFOMode(int32_t Handle, short *Value);
		1120
		1121	/*
		1122	CAENVME_SystemReset
		1123	-----------------------------------------------------------------------------
		1124	Parameters:
		1125	[in] Handle : The handle that identifies the device.
		1126	-----------------------------------------------------------------------------
		1127	Returns:
		1128	An error code about the execution of the function.
		1129	-----------------------------------------------------------------------------
		1130	Description:
		1131	The function performs a system reset on the module.
		1132	*/
		1133	CAENVME_API
		1134	CAENVME_SystemReset(int32_t Handle);
		1135
		1136	/*
		1137	CAENVME_ResetScalerCount
		1138	-----------------------------------------------------------------------------
		1139	Parameters:
		1140	[in] Handle : The handle that identifies the device.
		1141	-----------------------------------------------------------------------------
		1142	Returns:
		1143	An error code about the execution of the function.
		1144	-----------------------------------------------------------------------------
		1145	Description:
		1146	The function resets the counter of the scaler..
		1147	*/
		1148	CAENVME_API
		1149	CAENVME_ResetScalerCount(int32_t Handle);
		1150
		1151	/*
		1152	CAENVME_EnableScalerGate
		1153	-----------------------------------------------------------------------------
		1154	Parameters:
		1155	[in] Handle : The handle that identifies the device.
		1156	-----------------------------------------------------------------------------
		1157	Returns:
		1158	An error code about the execution of the function.
		1159	-----------------------------------------------------------------------------
		1160	Description:
		1161	The function enables the gate of the scaler.
		1162	*/
		1163	CAENVME_API
		1164	CAENVME_EnableScalerGate(int32_t Handle);
		1165
		1166	/*
		1167	CAENVME_DisableScalerGate
		1168	-----------------------------------------------------------------------------
		1169	Parameters:
		1170	[in] Handle : The handle that identifies the device.
		1171	-----------------------------------------------------------------------------
		1172	Returns:
		1173	An error code about the execution of the function.
		1174	-----------------------------------------------------------------------------
		1175	Description:
		1176	The function disables the gate of the scaler.
		1177	*/
		1178	CAENVME_API
		1179	CAENVME_DisableScalerGate(int32_t Handle);
		1180
		1181	/*
		1182	CAENVME_StartPulser
		1183	-----------------------------------------------------------------------------
		1184	Parameters:
		1185	[in] Handle : The handle that identifies the device.
		1186	[in] PulSel : The pulser to configure (see CVPulserSelect enum).
		1187	-----------------------------------------------------------------------------
		1188	Returns:
		1189	An error code about the execution of the function.
		1190	-----------------------------------------------------------------------------
		1191	Description:
		1192	The function starts the generation of pulse burst if the specified
		1193	pulser is configured for manual/software operation.
		1194	*/
		1195	CAENVME_API
		1196	CAENVME_StartPulser(int32_t Handle, CVPulserSelect PulSel);
		1197
		1198	/*
		1199	CAENVME_StopPulser
		1200	-----------------------------------------------------------------------------
		1201	Parameters:
		1202	[in] Handle : The handle that identifies the device.
		1203	[in] PulSel : The pulser to configure (see CVPulserSelect enum).
		1204	-----------------------------------------------------------------------------
		1205	Returns:
		1206	An error code about the execution of the function.
		1207	-----------------------------------------------------------------------------
		1208	Description:
		1209	The function stops the generation of pulse burst if the specified
		1210	pulser is configured for manual/software operation.
		1211	*/
		1212	CAENVME_API
		1213	CAENVME_StopPulser(int32_t Handle, CVPulserSelect PulSel);
		1214
		1215	/*
		1216	CAENVME_WriteFlashPage
		1217	-----------------------------------------------------------------------------
		1218	Parameters:
		1219	[in] Handle : The handle that identifies the device.
		1220	[in] Data : The data to write.
		1221	[in] PageNum : The flash page number to write.
		1222	-----------------------------------------------------------------------------
		1223	Returns:
		1224	An error code about the execution of the function.
		1225	-----------------------------------------------------------------------------
		1226	Description:
		1227	The function writes the data into the specified flash page.
		1228	*/
		1229	CAENVME_API
		1230	CAENVME_WriteFlashPage(int32_t Handle, unsigned char *Data, int PageNum);
		1231
		1232	/*
		1233	CAENVME_ReadFlashPage
		1234	-----------------------------------------------------------------------------
		1235	Parameters:
		1236	[in] Handle : The handle that identifies the device.
		1237	[out] Data : The data to write.
		1238	[in] PageNum : The flash page number to write.
		1239	-----------------------------------------------------------------------------
		1240	Returns:
		1241	An error code about the execution of the function.
		1242	-----------------------------------------------------------------------------
		1243	Description:
		1244	The function reads the data from the specified flash page.
		1245	*/
		1246	CAENVME_API
		1247	CAENVME_ReadFlashPage(int32_t Handle, unsigned char *Data, int PageNum);
		1248
		1249	/*
		1250	CAENVME_EraseFlashPage
		1251	-----------------------------------------------------------------------------
		1252	Parameters:
		1253	[in] Handle : The handle that identifies the device.
		1254	[in] PageNum : The flash page number to write.
		1255	-----------------------------------------------------------------------------
		1256	Returns:
		1257	An error code about the execution of the function.
		1258	-----------------------------------------------------------------------------
		1259	Description:
		1260	The function erases the specified flash page.
		1261	*/
		1262	CAENVME_API
		1263	CAENVME_EraseFlashPage(int32_t Handle, int Pagenum);
		1264
		1265	#ifdef LINUX
		1266	/*
		1267	CAENVME_BLTReadAsync
		1268	-----------------------------------------------------------------------------
		1269	Parameters:
		1270	[in] Handle : The handle that identifies the device.
		1271	[in] Address : The VME bus address.
		1272	[out] Buffer : The data read from the VME bus.
		1273	[in] Size : The size of the transfer in bytes.
		1274	[in] AM : The address modifier (see CVAddressModifier enum).
		1275	[in] DW : The data width.(see CVDataWidth enum).
		1276	-----------------------------------------------------------------------------
		1277	Returns:
		1278	An error code about the execution of the function.
		1279	-----------------------------------------------------------------------------
		1280	Description:
		1281	The function starts a VME block transfer read cycle. It can be used
		1282	to perform MBLT transfers using 64 bit data width.
		1283	This function cannot be used with the V1718 USB bridge.
		1284	This function can be used only on Linux platforms.
		1285	Take care to call the CAENVME_BLTReadWait function before any other
		1286	call to a CAENVMElib function with the same handle.
		1287	*/
		1288	CAENVME_API
		1289	CAENVME_BLTReadAsync(int32_t Handle, uint32_t Address, void *Buffer,
		1290	int Size, CVAddressModifier AM, CVDataWidth DW);
		1291
		1292	/*
		1293	CAENVME_BLTReadWait
		1294	-----------------------------------------------------------------------------
		1295	Parameters:
		1296	[in] Handle : The handle that identifies the device.
		1297	[out] Count : The number of bytes transferred.
		1298	-----------------------------------------------------------------------------
		1299	Returns:
		1300	An error code about the execution of the function.
		1301	-----------------------------------------------------------------------------
		1302	Description:
		1303	The function wait for the completion of a VME block transfer read
		1304	cycle started with the CAENVME_BLTReadAsync function call.
		1305	This function cannot be used with the V1718 USB bridge.
		1306	This function can be used only on Linux platforms.
		1307	*/
		1308	CAENVME_API
		1309	CAENVME_BLTReadWait(int32_t Handle, int *Count);
		1310
		1311	#endif
		1312
		1313	#ifdef __cplusplus
		1314	}
		1315	#endif // __cplusplus
		1316
		1317	#endif // __CAENVMELIB_H

Subversion Repositories f9daq

(root)/pts/CAENVMElib.h - Rev 83