Subversion Repositories f9daq

// libxxusb.cpp : Defines the entry point for the DLL application.

//

#include <string.h>

#include <malloc.h>

#include "usb.h"

#include "libxxusb.h"

#include <time.h>

#include "stdio.h"

// 03/09/06 Release 3.00 changes 

// 07/28/06     correction CAMAC write for F to be in range 16...23

// 10/09/06     correction CAMAC read for F to be in range <16 OR >23

// 10/16/06     CAMAC DGG corrected

// 12/28/07     Open corrected for bug when calling register after opening

/*

******** xxusb_longstack_execute ************************

  Executes stack array passed to the function and returns the data read from the VME bus

  Paramters:

    hdev: USB device handle returned from an open function

    DataBuffer: pointer to the dual use buffer

                when calling , DataBuffer contains (unsigned short) stack data, with first word serving

                as a placeholder

                upon successful return, DataBuffer contains (unsigned short) VME data

    lDataLen: The number of bytes to be fetched from VME bus - not less than the actual number

                expected, or the function will return -5 code. For stack consisting only of write operations,

                lDataLen may be set to 1.

    timeout: The time in ms that should be spent tryimg to write data.

  Returns:

    When Successful, the number of bytes read from xxusb.

    Upon failure, a negative number

  Note:

        The function must pass a pointer to an array of unsigned integer stack data, in which the first word

        is left empty to serve as a placeholder.

        The function is intended for executing Uint32_t stacks, up to 4 MBytes Uint32_t, both "write" and "read"

        oriented, such as using multi-block transfer operations.

        Structure upon call:

                DataBuffer(0) = 0(don't care place holder)

                DataBuffer(1) = (unsigned short)StackLength bits 0-15

                DataBuffer(2) = (unsigned short)StackLength bits 16-20

                DataBuffer(3 - StackLength +2)  (unsigned short) stack data

            StackLength represents the number of words following DataBuffer(1) word, thus the total number

                of words is StackLength+2

        Structure upon return:

                DataBuffer(0 - (ReturnValue/2-1)) - (unsigned short)array of returned data when ReturnValue>0

*/

int xxusb_longstack_execute(usb_dev_handle *hDev, void *DataBuffer, int lDataLen, int timeout)

{

    int ret;

    char *cbuf;

        unsigned short *usbuf;

    int bufsize;

        cbuf = (char *)DataBuffer;

        usbuf = (unsigned short *)DataBuffer;

    cbuf[0]=12;

    cbuf[1]=0;

        bufsize = 2*(usbuf[1]+0x10000*usbuf[2])+4;

    ret=usb_bulk_write(hDev, XXUSB_ENDPOINT_OUT, cbuf, bufsize, timeout);

    if (ret>0)

        ret=usb_bulk_read(hDev, XXUSB_ENDPOINT_IN, cbuf, lDataLen, timeout);

    return ret;

}

/*

******** xxusb_bulk_read ************************

  Reads the content of the usbfifo whenever "FIFO full" flag is set,

    otherwise times out.

  Paramters:

    hdev: USB device handle returned from an open function

    DataBuffer: pointer to an array to store data that is read from the VME bus;

                the array may be declared as byte, unsigned short, or unsigned Uint32_t

    lDatalen: The number of bytes to read from xxusb

    timeout: The time in ms that should be spent waiting for data.

  Returns:

    When Successful, the number of bytes read from xxusb.

    Upon failure, a negative number

  Note:

        Depending upon the actual need, the function may be used to return the data in a form

        of an array of bytes, unsigned short integers (16 bits), or unsigned Uint32_t integers (32 bits).

        The latter option of passing a pointer to an array of unsigned Uint32_t integers is meaningful when

        xxusb data buffering option is used (bit 7=128 of the global register) that requires data

        32-bit data alignment.

*/

int   xxusb_bulk_read(usb_dev_handle *hDev, void *DataBuffer, int lDataLen, int timeout)

{

int ret;

char *cbuf;

cbuf = (char *)DataBuffer;

    ret = usb_bulk_read(hDev, XXUSB_ENDPOINT_IN, cbuf, lDataLen, timeout);

    return ret;

}

/*

******** xxusb_bulk_write ************************

  Writes the content of an array of bytes, unsigned short integers, or unsigned Uint32_t integers

  to the USB port fifo; times out when the USB fifo is full (e.g., when xxusb is busy).

  Paramters:

    hdev: USB device handle returned from an open function

    DataBuffer: pointer to an array storing the data to be sent;

                the array may be declared as byte, unsigned short, or unsigned Uint32_t

    lDatalen: The number of bytes to to send to xxusb

    timeout: The time in ms that should be spent waiting for data.

  Returns:

    When Successful, the number of bytes passed to xxusb.

    Upon failure, a negative number

  Note:

        Depending upon the actual need, the function may be used to pass to xxusb the data in a form

        of an array of bytes, unsigned short integers (16 bits), or unsigned Uint32_t integers (32 bits).

*/

int   xxusb_bulk_write(usb_dev_handle *hDev, void *DataBuffer, int lDataLen, int timeout)

{

int ret;

char *cbuf;

cbuf = (char *)DataBuffer;

    ret = usb_bulk_write(hDev, XXUSB_ENDPOINT_OUT, cbuf, lDataLen, timeout);

    return ret;

}

/*

******** xxusb_usbfifo_read ************************

  Reads data stored in the xxusb fifo and packs them in an array of Uint32_t integers.

  Paramters:

    hdev: USB device handle returned from an open function

    DataBuffer: pointer to an array of Uint32_t to store data that is read

                the data occupy only the least significant 16 bits of the 32-bit data words

    lDatalen: The number of bytes to read from the xxusb

    timeout: The time in ms that should be spent waiting for data.

  Returns:

    When Successful, the number of bytes read from xxusb.

    Upon failure, a negative number

  Note:

        The function is not economical as it wastes half of the space required for storing

        the data received. Also, it is relatively slow, as it performs extensive data repacking.

        It is recommended to use xxusb_bulk_read with a pointer to an array of unsigned short

        integers.

*/

int   xxusb_usbfifo_read(usb_dev_handle *hDev, int *DataBuffer, int lDataLen, int timeout)

{

int ret;

char *cbuf;

unsigned short *usbuf;

int i;

cbuf = (char *)DataBuffer;

usbuf = (unsigned short *)DataBuffer;

    ret = usb_bulk_read(hDev, XXUSB_ENDPOINT_IN, cbuf, lDataLen, timeout);

    if (ret > 0)

        for (i=ret/2-1; i >= 0; i=i-1)

                {

                        usbuf[i*2]=usbuf[i];

                        usbuf[i*2+1]=0;

                }

    return ret;

}

//******************************************************//

//******************* GENERAL XX_USB *******************//

//******************************************************//

// The following are functions used for both VM_USB & CC_USB

/*

******** xxusb_register_write ************************

  Writes Data to the xxusb register selected by RedAddr.  For

    acceptable values for RegData and RegAddr see the manual

    the module you are using.

  Parameters:

    hdev: usb device handle returned from open device

    RegAddr: The internal address if the xxusb

    RegData: The Data to be written to the register

  Returns:

    Number of bytes sent to xxusb if successful

    Negative numbers if the call fails

*/

short   xxusb_register_write(usb_dev_handle *hDev, short RegAddr, Uint32_t RegData)

{

    Uint32_t RegD;

    char buf[8]={5,0,0,0,0,0,0,0};

    int ret;

    int lDataLen;

    int timeout;

    if ((RegAddr==0) || (RegAddr==12) || (RegAddr==15))

        return 0;

    buf[2]=(char)(RegAddr & 15);

    buf[4]=(char)(RegData & 255);

    RegD = RegData >> 8;

    buf[5]=(char)(RegD & 255);

        RegD = RegD >>8;

        if (RegAddr==8)

        {

                buf[6]=(char)(RegD & 255);

                lDataLen=8;

        }

        else

                lDataLen=6;

        timeout=10;

        ret=xxusb_bulk_write(hDev, buf, lDataLen, timeout);

        return ret;

}

/*

******** xxusb_stack_write ************************

  Writes a stack of VME/CAMAC calls to the VM_USB/CC_USB

    to be executed upon trigger.

  Parameters:

    hdev: usb device handle returned from an open function

    StackAddr: internal register to which the stack should be written

    lpStackData: Pointer to an array holding the stack

  Returns:

    The number of Bytes written to the xxusb when successful

    A negative number upon failure

*/

short   xxusb_stack_write(usb_dev_handle *hDev, short StackAddr, Uint32_t *intbuf)

{

  int timeout;

    short ret;

    short lDataLen;

    char buf[2000];

    short i;

    int bufsize;

    buf[0]=(char)((StackAddr & 51) + 4);

    buf[1]=0;

    lDataLen=(short)(intbuf[0] & 0xFFF);

    buf[2]=(char)(lDataLen & 255);

    lDataLen = lDataLen >> 8;

    buf[3] = (char)(lDataLen & 255);

    bufsize=intbuf[0]*2+4;

    if (intbuf[0]==0)

      return 0;

    for (i=1; i <= intbuf[0]; i++)

      {

        buf[2+2*i] = (char)(intbuf[i] & 255);

        buf[3+2*i] = (char)((intbuf[i] >>8) & 255);

      }

    timeout=50;

    ret=usb_bulk_write(hDev, XXUSB_ENDPOINT_OUT, buf, bufsize, timeout);

    return ret;

}

/*

******** xxusb_stack_execute **********************

  Writes, executes and returns the value of a DAQ stack.

  Parameters:

    hdev: USB device handle returned from an open function

    intbuf: Pointer to an array holding the values stack.  Upon return

            Pointer value is the Data returned from the stack.

  Returns:

    When successful, the number of Bytes read from xxusb

    Upon Failure, a negative number.

*/

short   xxusb_stack_execute(usb_dev_handle *hDev, Uint32_t *intbuf)

{

  int timeout;

    short ret;

    short lDataLen;

    char buf[26700];

    short i;

    int bufsize;

    int ii = 0;

    buf[0]=12;

    buf[1]=0;

    lDataLen=(short)(intbuf[0] & 0xFFF);

    buf[2]=(char)(lDataLen & 255);

    lDataLen = lDataLen >> 8;

    buf[3] = (char)(lDataLen & 15);

    bufsize=intbuf[0]*2+4;

    if (intbuf[0]==0)

      return 0;

    for (i=1; i <= intbuf[0]; i++)

      {

        buf[2+2*i] = (char)(intbuf[i] & 255);

        buf[3+2*i] = (char)((intbuf[i] >>8) & 255);

      }

    timeout=2000;

    ret=usb_bulk_write(hDev, XXUSB_ENDPOINT_OUT, buf, bufsize, timeout);

    if (ret>0)

        {

        lDataLen=26700;

        timeout=6000;

        ret=usb_bulk_read(hDev, XXUSB_ENDPOINT_IN, buf, lDataLen, timeout);

        if (ret>0)

        for (i=0; i < ret; i=i+2)

          intbuf[ii++]=(UCHAR)(buf[i]) +(UCHAR)( buf[i+1])*256;

        }

    return ret;

}

/*

******** xxusb_stack_read ************************

  Reads the current DAQ stack stored by xxusb

  Parameters:

    hdev: USB device handle returned by an open function

    StackAddr: Indicates which stack to read, primary or secondary

    intbuf: Pointer to a array where the stack can be stored

  Returns:

    Number of bytes read from xxusb when successful

    Upon failure, a negative number

*/

short   xxusb_stack_read(usb_dev_handle *hDev, short StackAddr, Uint32_t *intbuf)

{

  int timeout;

    short ret;

    short lDataLen;

    short bufsize;

    char buf[1600];

    int i;

    buf[0]=(char)(StackAddr & 51);

    buf[1]=0;

    lDataLen = 2;

    timeout=100;

    ret=usb_bulk_write(hDev, XXUSB_ENDPOINT_OUT, buf, lDataLen, timeout);

    if (ret < 0)

        return ret;

    else

      bufsize=1600;

    int ii=0;

      {

        ret=usb_bulk_read(hDev, XXUSB_ENDPOINT_IN, buf, bufsize, timeout);

        if (ret>0)

        for (i=0; i < ret; i=i+2)

          intbuf[ii++]=(UCHAR)(buf[i]) + (UCHAR)(buf[i+1])*256;

        return ret;

      }    

}

/*

******** xxusb_register_read ************************

  Reads the current contents of an internal xxusb register

  Parameters:

    hdev: USB device handle returned from an open function

    RegAddr: The internal address of the register from which to read

    RegData: Pointer to a Uint32_t to hold the data.

  Returns:

    When Successful, the number of bytes read from xxusb.

    Upon failure, a negative number

*/

short   xxusb_register_read(usb_dev_handle *hDev, short RegAddr, Uint32_t *RegData)

{

//Uint32_t RegD;

int timeout;

        char buf[4]={1,0,0,0};

        int ret;

        int lDataLen;

        buf[2]=(char)(RegAddr & 15);   

        timeout=10;

        lDataLen=4;

        ret=xxusb_bulk_write(hDev, buf, lDataLen, timeout);

        if (ret < 0)

                return (short)ret;

        else

        {

            lDataLen=8;

            timeout=100;

            ret=xxusb_bulk_read(hDev, buf, lDataLen, timeout);

            if (ret<0)

              return (short)ret;

            else

              {

                *RegData=(UCHAR)(buf[0])+256*(UCHAR)(buf[1]);

                if (ret==4)

                 *RegData=*RegData+0x10000*(UCHAR)(buf[2]);

                return (short)ret;

                }

        }

}

/*

******** xxusb_reset_toggle ************************

  Toggles the reset state of the FPGA while the xxusb in programming mode

  Parameters

    hdev: US B device handle returned from an open function

  Returns:

    Upon failure, a negative number  

*/

short   xxusb_reset_toggle(usb_dev_handle *hDev)

{

  short ret;

  char buf[2] = {(char)255,(char)255};

  int lDataLen=2;

  int timeout=1000;

  ret = usb_bulk_write(hDev, XXUSB_ENDPOINT_OUT, buf,lDataLen, timeout);

  return (short)ret;

}

/*

******** xxusb_devices_find ************************

  Determines the number and parameters of all xxusb devices attched to

    the computer.

  Parameters:

    xxdev: pointer to an array on which the device parameters are stored

  Returns:

    Upon success, returns the number of devices found

    Upon Failure returns a negative number

*/

short   xxusb_devices_find(xxusb_device_type *xxdev)

{

  short DevFound = 0;

  usb_dev_handle *udev;

  struct usb_bus *bus;

  struct usb_device *dev;  

struct usb_bus *usb_busses;

  char string[256];

  short ret;

   usb_init();

   usb_find_busses();

   usb_busses=usb_get_busses();

  usb_find_devices();

   for (bus=usb_busses; bus; bus = bus->next)

   {

       for (dev = bus->devices; dev; dev= dev->next)

       {

           if (dev->descriptor.idVendor==XXUSB_WIENER_VENDOR_ID)

           {

               udev = usb_open(dev);

               if (udev)

               {

                   ret = usb_get_string_simple(udev, dev->descriptor.iSerialNumber, string, sizeof(string));

                   if (ret >0 )  

                     {

                       xxdev[DevFound].usbdev=dev;

                       strcpy(xxdev[DevFound].SerialString, string);

                       DevFound++;

                     }

                   usb_close(udev);

                }

                   else return -1;

           }

       }

    }

  return DevFound;

}

/*

******** xxusb_device_close ************************

  Closes an xxusb device

  Parameters:

    hdev: USB device handle returned from an open function

  Returns:  1

*/

short   xxusb_device_close(usb_dev_handle *hDev)

{

    short ret;

    ret=usb_release_interface(hDev,0);

    usb_close(hDev);

    return 1;

}

/*

******** xxusb_device_open ************************

  Opens an xxusb device found by xxusb_device_find

  Parameters:

    dev: a usb device

  Returns:

    A USB device handle

*/

usb_dev_handle*   xxusb_device_open(struct usb_device *dev)

{

    short ret;

    Uint32_t val;

    int count =0;

    usb_dev_handle *udev;

    udev = usb_open(dev);

    ret = usb_set_configuration(udev,1);

    ret = usb_claim_interface(udev,0);

// RESET USB (added 10/16/06 Andreas Ruben)

        ret=xxusb_register_write(udev, 10, 0x04);

// Loop to find known state (added 12/28/07 TH / AR)

        ret =-1;

        while ((ret <0) && (count <10))

        {

            xxusb_register_read(udev, 0, &val);

            count++;

        }

    return udev;

}

/*

******** xxusb_flash_program ************************

    --Untested and therefore uncommented--

*/

short   xxusb_flash_program(usb_dev_handle *hDev, char *config, short nsect)

{

        int i=0;

        int k=0;

        short ret=0;

        time_t t1,t2;

        char *pconfig;

        char *pbuf;

        pconfig=config;

        char buf[518] ={(char)0xAA,(char)0xAA,(char)0x55,(char)0x55,(char)0xA0,(char)0xA0};

        while (*pconfig++ != -1);

        for (i=0; i<nsect; i++)

        {

                pbuf=buf+6;

                for (k=0; k<256; k++)

                {

                        *(pbuf++)=*(pconfig);

                        *(pbuf++)=*(pconfig++);

                }

                ret = usb_bulk_write(hDev, XXUSB_ENDPOINT_OUT, buf, 518, 2000);

                if (ret<0)

                        return ret;

                t1=clock()+(time_t)(0.03*CLOCKS_PER_SEC);

                while (t1>clock());

                t2=clock();

        }

        return ret;

}

/*

******** xxusb_flashblock_program ************************

      --Untested and therefore uncommented--  

*/

short   xxusb_flashblock_program(usb_dev_handle *hDev, UCHAR *config)

{

        int k=0;

        short ret=0;

        UCHAR *pconfig;

        char *pbuf;

        pconfig=config;

        char buf[518] ={(char)0xAA,(char)0xAA,(char)0x55,(char)0x55,(char)0xA0,(char)0xA0};

        pbuf=buf+6;

        for (k=0; k<256; k++)

        {

                *(pbuf++)=(UCHAR)(*(pconfig));

                *(pbuf++)=(UCHAR)(*(pconfig++));

        }

        ret = usb_bulk_write(hDev, XXUSB_ENDPOINT_OUT, buf, 518, 2000);

        return ret;

}

/*

******** xxusb_serial_open ************************

  Opens a xxusb device whose serial number is given

  Parameters:

    SerialString: a char string that gives the serial number of

                  the device you wish to open.  It takes the form:

                  VM0009 - for a vm_usb with serial number 9 or

                  CC0009 - for a cc_usb with serial number 9

  Returns:

    A USB device handle

*/

usb_dev_handle*   xxusb_serial_open(char *SerialString)

{

  short DevFound = 0;

  usb_dev_handle *udev = NULL;

  struct usb_bus *bus;

  struct usb_device *dev;  

struct usb_bus *usb_busses;

char string[20];

  short ret;

  //usb_set_debug(4);

  usb_init();

   usb_find_busses();

  usb_busses=usb_get_busses();

   usb_find_devices();

   for (bus=usb_busses; bus; bus = bus->next)

   {

       for (dev = bus->devices; dev; dev= dev->next)

       {

           if (dev->descriptor.idVendor==XXUSB_WIENER_VENDOR_ID)

           {

               printf("id %04x\n",dev->descriptor.idVendor);

               udev = xxusb_device_open(dev);

               if (udev)

               {

                   ret = usb_get_string_simple(udev, dev->descriptor.iSerialNumber, string, sizeof(string));

                                        printf("iSerial %04x string %s\n",dev->descriptor.iSerialNumber,string);

                                        if (ret >0 )  

                                                {

                                                        printf(" Device with %s\n",SerialString);

                                                        if (strcmp(string,SerialString)==0){

                                                                printf(" Device with %s found\n",SerialString);

                                                                return udev;

                                                        }

                                                } else {

                                                        printf(" Device returned  %d\n",ret);

                                                }

                                                usb_close(udev);

                                }

           }

       }

    }

   udev = NULL;

   return udev;

}

//******************************************************//

//****************** EZ_VME Functions ******************//

//******************************************************//

// The following are functions used to perform simple

// VME Functions with the VM_USB

/*

******** VME_write_32 ************************

  Writes a 32 bit data word to the VME bus

  Parameters:

    hdev: USB devcie handle returned from an open function

    Address_Modifier: VME address modifier for the VME call

    VME_Address: Address to write the data to

    Data: 32 bit data word to be written to VME_Address

  Returns:

    Number of bytes read from xxusb when successful

    Upon failure, a negative number

*/

short   VME_write_32(usb_dev_handle *hdev, short Address_Modifier, Uint32_t VME_Address, Uint32_t Data)

{

    Uint32_t intbuf[1000];

    short ret;

    intbuf[0]=7;

    intbuf[1]=0;

    intbuf[2]=Address_Modifier;

    intbuf[3]=0;

    intbuf[4]=(VME_Address & 0xffff);

    intbuf[5]=((VME_Address >>16) & 0xffff);

    intbuf[6]=(Data & 0xffff);

    intbuf[7]=((Data >> 16) & 0xffff);

    ret = xxusb_stack_execute(hdev, intbuf);

    return ret;

}

/*

******** VME_read_32 ************************

  Reads a 32 bit data word from a VME address

  Parameters:

    hdev: USB devcie handle returned from an open function

    Address_Modifier: VME address modifier for the VME call

    VME_Address: Address to read the data from

    Data: 32 bit data word read from VME_Address

  Returns:

    Number of bytes read from xxusb when successful

    Upon failure, a negative number

*/

short   VME_read_32(usb_dev_handle *hdev, short Address_Modifier, Uint32_t VME_Address, Uint32_t *Data)

{

    Uint32_t intbuf[1000];

    short ret;

    intbuf[0]=5;

    intbuf[1]=0;

    intbuf[2]=Address_Modifier +0x100;

    intbuf[3]=0;

    intbuf[4]=(VME_Address & 0xffff);

    intbuf[5]=((VME_Address >>16) & 0xffff);

    ret = xxusb_stack_execute(hdev, intbuf);

    *Data=intbuf[0] + (intbuf[1] * 0x10000);

    return ret;

}

/*

******** VME_write_16 ************************

  Writes a 16 bit data word to the VME bus

  Parameters:

    hdev: USB devcie handle returned from an open function

    Address_Modifier: VME address modifier for the VME call

    VME_Address: Address to write the data to

    Data: word to be written to VME_Address

  Returns:

    Number of bytes read from xxusb when successful

    Upon failure, a negative number

*/

short   VME_write_16(usb_dev_handle *hdev, short Address_Modifier, Uint32_t VME_Address, Uint32_t Data)

{

    Uint32_t intbuf[1000];

    short ret;

    intbuf[0]=7;

    intbuf[1]=0;

    intbuf[2]=Address_Modifier;

    intbuf[3]=0;

    intbuf[4]=(VME_Address & 0xffff)+ 0x01;

    intbuf[5]=((VME_Address >>16) & 0xffff);

    intbuf[6]=(Data & 0xffff);

    intbuf[7]=0;

    ret = xxusb_stack_execute(hdev, intbuf);

    return ret;

}

/*

******** VME_read_16 ************************

  Reads a 16 bit data word from a VME address

  Parameters:

    hdev: USB devcie handle returned from an open function

    Address_Modifier: VME address modifier for the VME call

    VME_Address: Address to read the data from

    Data: word read from VME_Address

  Returns:

    Number of bytes read from xxusb when successful

    Upon failure, a negative number

*/

short   VME_read_16(usb_dev_handle *hdev,short Address_Modifier, Uint32_t VME_Address, Uint32_t *Data)

{

    Uint32_t intbuf[1000];

    short ret;

    intbuf[0]=5;

    intbuf[1]=0;

    intbuf[2]=Address_Modifier +0x100;

    intbuf[3]=0;

    intbuf[4]=(VME_Address & 0xffff)+ 0x01;

    intbuf[5]=((VME_Address >>16) & 0xffff);

    ret = xxusb_stack_execute(hdev, intbuf);

    *Data=intbuf[0];

    return ret;

}

/*

******** VME_BLT_read_32 ************************

  Performs block transfer of 32 bit words from a VME address

  Parameters:

    hdev: USB devcie handle returned from an open function

    Address_Modifier: VME address modifier for the VME call

    count: number of data words to read

    VME_Address: Address to read the data from

    Data: pointer to an array to hold the data words

  Returns:

    Number of bytes read from xxusb when successful

    Upon failure, a negative number

*/

short   VME_BLT_read_32(usb_dev_handle *hdev, short Adress_Modifier, int count, Uint32_t VME_Address, Uint32_t Data[])

{

    Uint32_t intbuf[1000];

    short ret;

    int i=0;