WebSVN – f9daq – Blame – /pts/CAENVMElib.h

Rev	Author	Line No.	Line
52	f9daq	1	/*!
		2	-----------------------------------------------------------------------------
		3
		4	--- CAEN SpA - Computing Systems Division ---
		5
		6	-----------------------------------------------------------------------------
		7
		8	CAENVMElib.h
		9
		10	-----------------------------------------------------------------------------
		11
		12	Created: March 2004
		13
		14	-----------------------------------------------------------------------------
		15	*/
		16	#ifndef __CAENVMELIB_H
		17	#define __CAENVMELIB_H
		18
		19	#include <stdio.h>
		20	// Rev. 2.5
		21	#ifdef LINUX
		22	#include <stdint.h>
		23	#endif
		24	#include <stdlib.h>
		25	#ifndef _CVI_
		26	#include <malloc.h>
		27	#endif
		28	#include "CAENVMEoslib.h"
		29	#include "CAENVMEtypes.h"
		30
		31	#ifdef WIN32
		32	#ifdef _CVI_
		33	typedef char int8_t;
		34	typedef unsigned char uint8_t;
		35	typedef short int16_t;
		36	typedef unsigned short uint16_t;
		37	typedef int int32_t;
		38	typedef unsigned int uint32_t;
		39	// typedef INT64 int64_t;
		40	// typedef UINT64 uint64_t;
		41	#else
		42	typedef INT8 int8_t;
		43	typedef UINT8 uint8_t;
		44	typedef INT16 int16_t;
		45	typedef UINT16 uint16_t;
		46	typedef INT32 int32_t;
		47	typedef UINT32 uint32_t;
		48	typedef INT64 int64_t;
		49	typedef UINT64 uint64_t;
		50	#endif
		51	#endif
		52
		53	#ifdef __cplusplus
		54	extern "C" {
		55	#endif // __cplusplus
		56	/*
		57	CAENVME_DecodeError
		58	-----------------------------------------------------------------------------
		59	Parameters:
		60	[in] Code : The error code to decode.
		61	-----------------------------------------------------------------------------
		62	Returns:
		63	An string describing the error condition.
		64	-----------------------------------------------------------------------------
		65	Description:
		66	Decode the error.
		67	*/
		68	const char *
		69	#ifdef WIN32
		70	__stdcall
		71	#endif
		72	CAENVME_DecodeError(CVErrorCodes Code);
		73
		74	/*
		75	CAENVME_API CAENVME_SWRelease
		76	-----------------------------------------------------------------------------
		77	Parameters:
		78	[out] SwRel : Returns the software release of the library.
		79	-----------------------------------------------------------------------------
		80	Returns:
		81	An error code about the execution of the function.
		82	-----------------------------------------------------------------------------
		83	Description:
		84	Permits to read the software release of the library.
		85	*/
		86	CAENVME_API
		87	CAENVME_SWRelease(char *SwRel);
		88
		89	/*
		90	CAENVME_BoardFWRelease.
		91	-----------------------------------------------------------------------------
		92	Parameters:
		93	[in] Handle : The handle that identifies the device.
		94	[out] FWRel : Returns the firmware release of the device.
		95	-----------------------------------------------------------------------------
		96	Returns:
		97	An error code about the execution of the function.
		98	-----------------------------------------------------------------------------
		99	Description:
		100	Permits to read the firmware release loaded into the device.
		101	*/
		102	CAENVME_API
		103	CAENVME_BoardFWRelease(int32_t Handle, char *FWRel);
		104
		105	/*
		106	CAENVME_DriverRelease.
		107	-----------------------------------------------------------------------------
		108	Parameters:
		109	[in] Handle : The handle that identifies the device.
		110	[out] Rel : Returns the software release of the device driver
		111	-----------------------------------------------------------------------------
		112	Returns:
		113	An error code about the execution of the function.
		114	-----------------------------------------------------------------------------
		115	Description:
		116	Permits to read the software release of the device driver.
		117	*/
		118	CAENVME_API
		119	CAENVME_DriverRelease(int32_t Handle, char *Rel);
		120
		121	/*
		122	CAENVME_DeviceReset
		123	-----------------------------------------------------------------------------
		124	Parameters:
		125	[in] Handle : The handle that identifies the device.
		126	-----------------------------------------------------------------------------
		127	Returns:
		128	An error code about the execution of the function.
		129	-----------------------------------------------------------------------------
		130	Description:
		131	Permits to reset the device.
		132	Implemented for A2818, A2719, V2718 on Linux platform only
		133	*/
		134	CAENVME_API
		135	CAENVME_DeviceReset(int32_t dev);
		136
		137
		138	/*
		139	CAENVME_Init
		140	-----------------------------------------------------------------------------
		141	Parameters:
		142	[in] BdType : The model of the bridge (V1718/V2718).
		143	[in] Link : The link number (don't care for V1718).
		144	[in] BdNum : The board number in the link.
		145	[out] Handle : The handle that identifies the device.
		146	-----------------------------------------------------------------------------
		147	Returns:
		148	An error code about the execution of the function.
		149	-----------------------------------------------------------------------------
		150	Description:
		151	The function generates an opaque handle to identify a module
		152	attached to the PC. In the case of V1718 bridge it must be
		153	specified only the module index (BdNum) because the link is USB.
		154	In the case of V2718 it must be specified also the link because
		155	you can have some A2818 optical link inside the PC.
		156	*/
		157	CAENVME_API
		158	CAENVME_Init(CVBoardTypes BdType, short Link, short BdNum, int32_t *Handle);
		159
		160	/*
		161	CAENVME_End
		162	-----------------------------------------------------------------------------
		163	Parameters:
		164	[in] Handle : The handle that identifies the device.
		165	-----------------------------------------------------------------------------
		166	Returns:
		167	An error code about the execution of the function.
		168	-----------------------------------------------------------------------------
		169	Description:
		170	Notifies the library the end of work and free the allocated
		171	resources.
		172	*/
		173	CAENVME_API
		174	CAENVME_End(int32_t Handle);
		175
		176	/*
		177	CAENVME_ReadCycle
		178	-----------------------------------------------------------------------------
		179	Parameters:
		180	[in] Handle : The handle that identifies the device.
		181	[in] Address : The VME bus address.
		182	[out] Data : The data read from the VME bus.
		183	[in] AM : The address modifier (see CVAddressModifier enum).
		184	[in] DW : The data width.(see CVDataWidth enum).
		185	-----------------------------------------------------------------------------
		186	Returns:
		187	An error code about the execution of the function.
		188	-----------------------------------------------------------------------------
		189	Description:
		190	The function performs a single VME read cycle.
		191	*/
		192	CAENVME_API
		193	CAENVME_ReadCycle(int32_t Handle, uint32_t Address, void *Data,
		194	CVAddressModifier AM, CVDataWidth DW);
		195
		196	/*
		197	CAENVME_RMWCycle
		198	-----------------------------------------------------------------------------
		199	Parameters:
		200	[in] Handle : The handle that identifies the device.
		201	[in] Address: The VME bus address.
		202	[in/out] Data : The data read and then written to the VME bus.
		203	[in] AM : The address modifier (see CVAddressModifier enum).
		204	[in] DW : The data width.(see CVDataWidth enum).
		205	-----------------------------------------------------------------------------
		206	Returns:
		207	An error code about the execution of the function.
		208	-----------------------------------------------------------------------------
		209	Description:
		210	The function performs a Read-Modify-Write cycle. The Data parameter
		211	is bidirectional: it is used to write the value to the VME bus and to
		212	return the value read.
		213	*/
		214	CAENVME_API
		215	CAENVME_RMWCycle(int32_t Handle, uint32_t Address, void *Data,
		216	CVAddressModifier AM, CVDataWidth DW);
		217
		218	/*
		219	CAENVME_WriteCycle
		220	-----------------------------------------------------------------------------
		221	Parameters:
		222	[in] Handle : The handle that identifies the device.
		223	[in] Address : The VME bus address.
		224	[in] Data : The data written to the VME bus.
		225	[in] AM : The address modifier (see CVAddressModifier enum).
		226	[in] DW : The data width.(see CVDataWidth enum).
		227	-----------------------------------------------------------------------------
		228	Returns:
		229	An error code about the execution of the function.
		230	-----------------------------------------------------------------------------
		231	Description:
		232	The function performs a single VME write cycle.
		233	*/
		234	CAENVME_API
		235	CAENVME_WriteCycle(int32_t Handle, uint32_t Address, void *Data,
		236	CVAddressModifier AM, CVDataWidth DW);
		237
		238	/*
		239	CAENVME_MultiRead (Ver. 2.2)
		240	-----------------------------------------------------------------------------
		241	Parameters:
		242	[in] Handle : The handle that identifies the device.
		243	[in] Addrs : The VME bus addresses.
		244	[out] Buffer : The data read from the VME bus.
		245	[in] NCycles : The number of read cycles to perform.
		246	[in] AMs : The address modifiers (see CVAddressModifier enum).
		247	[in] DWs : The data widths.(see CVDataWidth enum).
		248	[out] ECs : The error codes relaive to each cycle.
		249	-----------------------------------------------------------------------------
		250	Returns:
		251	An error code about the execution of the function.
		252	-----------------------------------------------------------------------------
		253	Description:
		254	The function performs a block of single VME read cycles.
		255	*/
		256	CAENVME_API
		257	CAENVME_MultiRead(int32_t Handle, uint32_t Addrs, uint32_t Buffer,
		258	int NCycles, CVAddressModifier AMs, CVDataWidth DWs, CVErrorCodes *ECs);
		259
		260	/*
		261	CAENVME_MultiWrite (Ver. 2.2)
		262	-----------------------------------------------------------------------------
		263	Parameters:
		264	[in] Handle : The handle that identifies the device.
		265	[in] Addrs : The VME bus addresses.
		266	[in] Buffer : The data to write to the VME bus.
		267	[in] NCycles : The number of read cycles to perform.
		268	[in] AMs : The address modifiers (see CVAddressModifier enum).
		269	[in] DWs : The data widths.(see CVDataWidth enum).
		270	[out] ECs : The error codes relaive to each cycle.
		271	-----------------------------------------------------------------------------
		272	Returns:
		273	An error code about the execution of the function.
		274	-----------------------------------------------------------------------------
		275	Description:
		276	The function performs a block of single VME write cycles.
		277	*/
		278	CAENVME_API
		279	CAENVME_MultiWrite(int32_t Handle, uint32_t Addrs, uint32_t Buffer,
		280	int NCycles, CVAddressModifier AMs, CVDataWidth DWs, CVErrorCodes *ECs);
		281
		282	/*
		283	CAENVME_BLTReadCycle
		284	-----------------------------------------------------------------------------
		285	Parameters:
		286	[in] Handle : The handle that identifies the device.
		287	[in] Address : The VME bus address.
		288	[out] Buffer : The data read from the VME bus.
		289	[in] Size : The size of the transfer in bytes.
		290	[in] AM : The address modifier (see CVAddressModifier enum).
		291	[in] DW : The data width.(see CVDataWidth enum).
		292	[out] count : The number of bytes transferred.
		293	-----------------------------------------------------------------------------
		294	Returns:
		295	An error code about the execution of the function.
		296	-----------------------------------------------------------------------------
		297	Description:
		298	The function performs a VME block transfer read cycle. It can be used to
		299	perform MBLT transfers using 64 bit data width.
		300	*/
		301	CAENVME_API
		302	CAENVME_BLTReadCycle(int32_t Handle, uint32_t Address, void *Buffer,
		303	int Size, CVAddressModifier AM, CVDataWidth DW, int *count);
		304
		305	/*
		306	Ver. 2.3 - New function
		307
		308	CAENVME_FIFOBLTReadCycle
		309	-----------------------------------------------------------------------------
		310	Parameters:
		311	[in] Handle : The handle that identifies the device.
		312	[in] Address : The VME bus address.
		313	[out] Buffer : The data read from the VME bus.
		314	[in] Size : The size of the transfer in bytes.
		315	[in] AM : The address modifier (see CVAddressModifier enum).
		316	[in] DW : The data width.(see CVDataWidth enum).
		317	[out] count : The number of bytes transferred.
		318	-----------------------------------------------------------------------------
		319	Returns:
		320	An error code about the execution of the function.
		321	-----------------------------------------------------------------------------
		322	Description:
		323	The function performs a VME block transfer read cycle. It can be used to
		324	perform MBLT transfers using 64 bit data width. The Address is not
		325	incremented on the VMEBus during the cycle.
		326	*/
		327	CAENVME_API
		328	CAENVME_FIFOBLTReadCycle(int32_t Handle, uint32_t Address, void *Buffer,
		329	int Size, CVAddressModifier AM, CVDataWidth DW, int *count);
		330
		331	/*
		332	CAENVME_MBLTReadCycle
		333	-----------------------------------------------------------------------------
		334	Parameters:
		335	[in] Handle : The handle that identifies the device.
		336	[in] Address : The VME bus address.
		337	[out] Buffer : The data read from the VME bus.
		338	[in] Size : The size of the transfer in bytes.
		339	[in] AM : The address modifier (see CVAddressModifier enum).
		340	[out] count : The number of bytes transferred.
		341	-----------------------------------------------------------------------------
		342	Returns:
		343	An error code about the execution of the function.
		344	-----------------------------------------------------------------------------
		345	Description:
		346	The function performs a VME multiplexed block transfer read cycle.
		347	*/
		348	CAENVME_API
		349	CAENVME_MBLTReadCycle(int32_t Handle, uint32_t Address, void *Buffer,
		350	int Size, CVAddressModifier AM, int *count);
		351
		352	/*
		353	Ver. 2.3 - New function
		354
		355	CAENVME_FIFOMBLTReadCycle
		356	-----------------------------------------------------------------------------
		357	Parameters:
		358	[in] Handle : The handle that identifies the device.
		359	[in] Address : The VME bus address.
		360	[out] Buffer : The data read from the VME bus.
		361	[in] Size : The size of the transfer in bytes.
		362	[in] AM : The address modifier (see CVAddressModifier enum).
		363	[out] count : The number of bytes transferred.
		364	-----------------------------------------------------------------------------
		365	Returns:
		366	An error code about the execution of the function.
		367	-----------------------------------------------------------------------------
		368	Description:
		369	The function performs a VME multiplexed block transfer read cycle.
		370	The Address is not incremented on the VMEBus during the cycle.
		371	*/
		372	CAENVME_API
		373	CAENVME_FIFOMBLTReadCycle(int32_t Handle, uint32_t Address, void *Buffer,
		374	int Size, CVAddressModifier AM, int *count);
		375
		376	/*
		377	CAENVME_BLTWriteCycle
		378	-----------------------------------------------------------------------------
		379	Parameters:
		380	[in] Handle : The handle that identifies the device.
		381	[in] Address : The VME bus address.
		382	[in] Buffer : The data to be written to the VME bus.
		383	[in] Size : The size of the transfer in bytes.
		384	[in] AM : The address modifier (see CVAddressModifier enum).
		385	[in] DW : The data width.(see CVDataWidth enum).
		386	[out] count : The number of bytes transferred.
		387	-----------------------------------------------------------------------------
		388	Returns:
		389	An error code about the execution of the function.
		390	-----------------------------------------------------------------------------
		391	Description:
		392	The function performs a VME block transfer write cycle.
		393	*/
		394	CAENVME_API
		395	CAENVME_BLTWriteCycle(int32_t Handle, uint32_t Address, void *Buffer,
		396	int size, CVAddressModifier AM, CVDataWidth DW, int *count);
		397
		398	/*
		399	Ver. 2.3 - New function
		400
		401	CAENVME_FIFOBLTWriteCycle
		402	-----------------------------------------------------------------------------
		403	Parameters:
		404	[in] Handle : The handle that identifies the device.
		405	[in] Address : The VME bus address.
		406	[in] Buffer : The data to be written to the VME bus.
		407	[in] Size : The size of the transfer in bytes.
		408	[in] AM : The address modifier (see CVAddressModifier enum).
		409	[in] DW : The data width.(see CVDataWidth enum).
		410	[out] count : The number of bytes transferred.
		411	-----------------------------------------------------------------------------
		412	Returns:
		413	An error code about the execution of the function.
		414	-----------------------------------------------------------------------------
		415	Description:
		416	The function performs a VME block transfer write cycle. The address
		417	is not incremented during the cycle.
		418	*/
		419	CAENVME_API
		420	CAENVME_FIFOBLTWriteCycle(int32_t Handle, uint32_t Address, void *Buffer,
		421	int size, CVAddressModifier AM, CVDataWidth DW, int *count);
		422
		423	/*
		424	CAENVME_MBLTWriteCycle
		425	-----------------------------------------------------------------------------
		426	Parameters:
		427	[in] Handle : The handle that identifies the device.
		428	[in] Address : The VME bus address.
		429	[in] Buffer : The data to be written to the VME bus.
		430	[in] Size : The size of the transfer in bytes.
		431	[in] AM : The address modifier (see CVAddressModifier enum).
		432	[out] count : The number of bytes transferred.
		433	-----------------------------------------------------------------------------
		434	Returns:
		435	An error code about the execution of the function.
		436	-----------------------------------------------------------------------------
		437	Description:
		438	The function performs a VME multiplexed block transfer write cycle.
		439	*/
		440	CAENVME_API
		441	CAENVME_MBLTWriteCycle(int32_t Handle, uint32_t Address, void *Buffer,
		442	int size, CVAddressModifier AM, int *count);
		443
		444	/*
		445	Ver. 2.3 - New function
		446
		447	CAENVME_FIFOMBLTWriteCycle
		448	-----------------------------------------------------------------------------
		449	Parameters:
		450	[in] Handle : The handle that identifies the device.
		451	[in] Address : The VME bus address.
		452	[in] Buffer : The data to be written to the VME bus.
		453	[in] Size : The size of the transfer in bytes.
		454	[in] AM : The address modifier (see CVAddressModifier enum).
		455	[out] count : The number of bytes transferred.
		456	-----------------------------------------------------------------------------
		457	Returns:
		458	An error code about the execution of the function.
		459	-----------------------------------------------------------------------------
		460	Description:
		461	The function performs a VME multiplexed block transfer write cycle.
		462	The address is not incremented during the cycle.
		463	*/
		464	CAENVME_API
		465	CAENVME_FIFOMBLTWriteCycle(int32_t Handle, uint32_t Address, void *Buffer,
		466	int size, CVAddressModifier AM, int *count);
		467
		468	/*
		469	CAENVME_ADOCycle
		470	-----------------------------------------------------------------------------
		471	Parameters:
		472	[in] Handle : The handle that identifies the device.
		473	[in] Address : The VME bus address.
		474	[in] AM : The address modifier (see CVAddressModifier enum).
		475	-----------------------------------------------------------------------------
		476	Returns:
		477	An error code about the execution of the function.
		478	-----------------------------------------------------------------------------
		479	Description:
		480	The function performs a VME address only cycle. It can be used to
		481	perform MBLT transfers using 64 bit data width.
		482	*/
		483	CAENVME_API
		484	CAENVME_ADOCycle(int32_t Handle, uint32_t Address, CVAddressModifier AM);
		485
		486	/*
		487	CAENVME_ADOHCycle
		488	-----------------------------------------------------------------------------
		489	Parameters:
		490	[in] Handle : The handle that identifies the device.
		491	[in] Address : The VME bus address.
		492	[in] AM : The address modifier (see CVAddressModifier enum).
		493	-----------------------------------------------------------------------------
		494	Returns:
		495	An error code about the execution of the function.
		496	-----------------------------------------------------------------------------
		497	Description:
		498	The function performs a VME address only with handshake cycle.
		499	*/
		500	CAENVME_API
		501	CAENVME_ADOHCycle(int32_t Handle, uint32_t Address, CVAddressModifier AM);
		502
		503	/*
		504	CAENVME_IACKCycle
		505	-----------------------------------------------------------------------------
		506	Parameters:
		507	[in] Handle : The handle that identifies the device.
		508	[in] Level : The IRQ level to acknowledge (see CVIRQLevels enum).
		509	[in] DW : The data width.(see CVDataWidth enum).
		510	-----------------------------------------------------------------------------
		511	Returns:
		512	An error code about the execution of the function.
		513	-----------------------------------------------------------------------------
		514	Description:
		515	The function performs a VME interrupt acknowledge cycle.
		516	*/
		517	CAENVME_API
		518	CAENVME_IACKCycle(int32_t Handle, CVIRQLevels Level, void *Vector, CVDataWidth DW);
		519
		520	/*
		521	CAENVME_IRQCheck
		522	-----------------------------------------------------------------------------
		523	Parameters:
		524	[in] Handle : The handle that identifies the device.
		525	[out] Mask : A bit-mask indicating the active IRQ lines.
		526	-----------------------------------------------------------------------------
		527	Returns:
		528	An error code about the execution of the function.
		529	-----------------------------------------------------------------------------
		530	Description:
		531	The function returns a bit mask indicating the active IRQ lines.
		532	*/
		533	CAENVME_API
		534	CAENVME_IRQCheck(int32_t Handle, CAEN_BYTE *Mask);
		535
		536	/*
		537	CAENVME_IRQEnable
		538	-----------------------------------------------------------------------------
		539	Parameters:
		540	[in] Handle : The handle that identifies the device.
		541	[in] Mask : A bit-mask indicating the IRQ lines.
		542	-----------------------------------------------------------------------------
		543	Returns:
		544	An error code about the execution of the function.
		545	-----------------------------------------------------------------------------
		546	Description:
		547	The function enables the IRQ lines specified by Mask.
		548	*/
		549	CAENVME_API
		550	CAENVME_IRQEnable(int32_t Handle, uint32_t Mask);
		551
		552	/*
		553	CAENVME_IRQDisable
		554	-----------------------------------------------------------------------------
		555	Parameters:
		556	[in] Handle : The handle that identifies the device.
		557	[in] Mask : A bit-mask indicating the IRQ lines.
		558	-----------------------------------------------------------------------------
		559	Returns:
		560	An error code about the execution of the function.
		561	-----------------------------------------------------------------------------
		562	Description:
		563	The function disables the IRQ lines specified by Mask.
		564	*/
		565	CAENVME_API
		566	CAENVME_IRQDisable(int32_t Handle, uint32_t Mask);
		567
		568	/*
		569	CAENVME_IRQWait
		570	-----------------------------------------------------------------------------
		571	Parameters:
		572	[in] Handle : The handle that identifies the device.
		573	[in] Mask : A bit-mask indicating the IRQ lines.
		574	[in] Timeout : Timeout in milliseconds.
		575	-----------------------------------------------------------------------------
		576	Returns:
		577	An error code about the execution of the function.
		578	-----------------------------------------------------------------------------
		579	Description:
		580	The function wait the IRQ lines specified by Mask until one of
		581	them raise or timeout expires.
		582	*/
		583	CAENVME_API
		584	CAENVME_IRQWait(int32_t Handle, uint32_t Mask, uint32_t Timeout);
		585
		586	/*
		587	CAENVME_SetPulserConf
		588	-----------------------------------------------------------------------------
		589	Parameters:
		590	[in] Handle : The handle that identifies the device.
		591	[in] PulSel : The pulser to configure (see CVPulserSelect enum).
		592	[in] Period : The period of the pulse in time units.
		593	[in] Width : The width of the pulse in time units.
		594	[in] Unit : The time unit for the pulser configuration (see
		595	CVTimeUnits enum).
		596	[in] PulseNo : The number of pulses to generate (0 = infinite).
		597	[in] Start : The source signal to start the pulse burst (see
		598	CVIOSources enum).
		599	[in] Reset : The source signal to stop the pulse burst (see
		600	CVIOSources enum).
		601	-----------------------------------------------------------------------------
		602	Returns:
		603	An error code about the execution of the function.
		604	-----------------------------------------------------------------------------
		605	Description:
		606	The function permits to configure the pulsers. All the timing parameters
		607	are expressed in the time units specified. The start signal source can be
		608	one of: front panel button or software (cvManualSW), input signal 0
		609	(cvInputSrc0),input signal 1 (cvInputSrc1) or input coincidence
		610	(cvCoincidence). The reset signal source can be: front panel button or
		611	software (cvManualSW) or, for pulser A the input signal 0 (cvInputSrc0),
		612	for pulser B the input signal 1 (cvInputSrc1).
		613	*/
		614	CAENVME_API
		615	CAENVME_SetPulserConf(int32_t Handle, CVPulserSelect PulSel, unsigned char Period,
		616	unsigned char Width, CVTimeUnits Unit, unsigned char PulseNo,
		617	CVIOSources Start, CVIOSources Reset);
		618
		619	/*
		620	CAENVME_SetScalerConf
		621	-----------------------------------------------------------------------------
		622	Parameters:
		623	[in] Handle : The handle that identifies the device.
		624	[in] Limit : The counter limit for the scaler.
		625	[in] AutoReset : Enable/disable the counter auto reset.
		626	[in] Hit : The source signal for the signal to count (see
		627	CVIOSources enum).
		628	[in] Gate : The source signal for the gate (see CVIOSources enum).
		629	[in] Reset : The source signal to stop the counter (see
		630	CVIOSources enum).
		631	-----------------------------------------------------------------------------
		632	Returns:
		633	An error code about the execution of the function.
		634	-----------------------------------------------------------------------------
		635	Description:
		636	The function permits to configure the scaler. Limit range is 0 - 1024
		637	(10 bit). The hit signal source can be: input signal 0 (cvInputSrc0)
		638	or input coincidence (cvCoincidence). The gate signal source can be:
		639	front panel button or software (cvManualSW) or input signal 1
		640	(cvInputSrc1). The reset signal source can be: front panel button or
		641	software (cvManualSW) or input signal 1 (cvInputSrc1).
		642	*/
		643	CAENVME_API
		644	CAENVME_SetScalerConf(int32_t Handle, short Limit, short AutoReset,
		645	CVIOSources Hit, CVIOSources Gate, CVIOSources Reset);
		646
		647	/*
		648	CAENVME_SetOutputConf
		649	-----------------------------------------------------------------------------
		650	Parameters:
		651	[in] Handle : The handle that identifies the device.
		652	[in] OutSel : The output line to configure (see CVOutputSelect
		653	enum).
		654	[in] OutPol : The output line polarity (see CVIOPolarity enum).
		655	[in] LEDPol : The output LED polarity (see CVLEDPolarity enum).
		656	[in] Source : The source signal to propagate to the output line
		657	(see CVIOSources enum).
		658	-----------------------------------------------------------------------------
		659	Returns:
		660	An error code about the execution of the function.
		661	-----------------------------------------------------------------------------
		662	Description:
		663	The function permits to configure the output lines of the module. It
		664	can be specified the polarity for the line and for the LED. The
		665	output line source depends on the line as figured out by the
		666	following table:
		667
		668	+-----------------------------------------------------------+
		669	! S O U R C E S E L E C T I O N !
		670	+--------------+---------------+---------------+------------+
		671	! cvVMESignals ! cvCoincidence ! cvMiscSignals ! cvManualSW !
		672	+---+---+--------------+---------------+---------------+------------+
		673	! ! 0 ! DS ! Input Coinc. ! Pulser A ! Manual/SW !
		674	! O +---+--------------+---------------+---------------+------------+
		675	! U ! 1 ! AS ! Input Coinc. ! Pulser A ! Manual/SW !
		676	! T +---+--------------+---------------+---------------+------------+
		677	! P ! 2 ! DTACK ! Input Coinc. ! Pulser B ! Manual/SW !
		678	! U +---+--------------+---------------+---------------+------------+
		679	! T ! 3 ! BERR ! Input Coinc. ! Pulser B ! Manual/SW !
		680	! +---+--------------+---------------+---------------+------------+
		681	! ! 4 ! LMON ! Input Coinc. ! Scaler end ! Manual/SW !
		682	+---+---+--------------+---------------+---------------+------------+
		683	*/
		684	CAENVME_API
		685	CAENVME_SetOutputConf(int32_t Handle, CVOutputSelect OutSel, CVIOPolarity OutPol,
		686	CVLEDPolarity LEDPol, CVIOSources Source);
		687
		688	/*
		689	CAENVME_SetInputConf
		690	-----------------------------------------------------------------------------
		691	Parameters:
		692	[in] Handle : The handle that identifies the device.
		693	[in] InSel : The input line to configure (see CVInputSelect enum).
		694	[in] InPol : The input line polarity (see CVIOPolarity enum).
		695	[in] LEDPol : The output LED polarity (see CVLEDPolarity enum).
		696	-----------------------------------------------------------------------------
		697	Returns:
		698	An error code about the execution of the function.
		699	-----------------------------------------------------------------------------
		700	Description:
		701	The function permits to configure the input lines of the module. It
		702	ca be specified the polarity for the line and for the LED.
		703	*/
		704	CAENVME_API
		705	CAENVME_SetInputConf(int32_t Handle, CVInputSelect InSel, CVIOPolarity InPol,
		706	CVLEDPolarity LEDPol);
		707
		708	/*
		709	CAENVME_GetPulserConf
		710	-----------------------------------------------------------------------------
		711	Parameters:
		712	[in] Handle : The handle that identifies the device.
		713	[in] PulSel : The pulser to configure (see CVPulserSelect enum).
		714	[out] Period : The period of the pulse in time units.
		715	[out] Width : The width of the pulse in time units.
		716	[out] Unit : The time unit for the pulser configuration (see
		717	CVTimeUnits enum).
		718	[out] PulseNo : The number of pulses to generate (0 = infinite).
		719	[out] Start : The source signal to start the pulse burst (see
		720	CVIOSources enum).
		721	[out] Reset : The source signal to stop the pulse burst (see
		722	CVIOSources enum).
		723	-----------------------------------------------------------------------------
		724	Returns:
		725	An error code about the execution of the function.
		726	-----------------------------------------------------------------------------
		727	Description:
		728	The function permits to read the configuration of the pulsers.
		729	*/
		730	CAENVME_API
		731	CAENVME_GetPulserConf(int32_t Handle, CVPulserSelect PulSel, unsigned char *Period,
		732	unsigned char Width, CVTimeUnits Unit, unsigned char *PulseNo,
		733	CVIOSources Start, CVIOSources Reset);
		734
		735	/*
		736	CAENVME_GetScalerConf
		737	-----------------------------------------------------------------------------
		738	Parameters:
		739	[in] Handle : The handle that identifies the device.
		740	[out] Limit : The counter limit for the scaler.
		741	[out] AutoReset : The auto reset configuration.
		742	[out] Hit : The source signal for the signal to count (see
		743	CVIOSources enum).
		744	[out] Gate : The source signal for the gate (see CVIOSources enum).
		745	[out] Reset : The source signal to stop the counter (see
		746	CVIOSources enum).
		747	-----------------------------------------------------------------------------
		748	Returns:
		749	An error code about the execution of the function.
		750	-----------------------------------------------------------------------------
		751	Description:
		752	The function permits to read the configuration of the scaler.
		753	*/
		754	CAENVME_API
		755	CAENVME_GetScalerConf(int32_t Handle, short Limit, short AutoReset,
		756	CVIOSources Hit, CVIOSources Gate, CVIOSources *Reset);
		757
		758
		759	/*
		760	CAENVME_SetOutputConf
		761	-----------------------------------------------------------------------------
		762	Parameters:
		763	[in] Handle : The handle that identifies the device.
		764	[in] OutSel : The output line to configure (see CVOutputSelect enum).
		765	[out] OutPol : The output line polarity (see CVIOPolarity enum).
		766	[out] LEDPol : The output LED polarity (see CVLEDPolarity enum).
		767	[out] Source : The source signal to propagate to the output line (see
		768	CVIOSources enum).
		769	-----------------------------------------------------------------------------
		770	Returns:
		771	An error code about the execution of the function.
		772	-----------------------------------------------------------------------------
		773	Description:
		774	The function permits to read the configuration of the output lines.
		775	*/
		776	CAENVME_API
		777	CAENVME_GetOutputConf(int32_t Handle, CVOutputSelect OutSel, CVIOPolarity *OutPol,
		778	CVLEDPolarity LEDPol, CVIOSources Source);
		779
		780	/*
		781	CAENVME_SetInputConf
		782	-----------------------------------------------------------------------------
		783	Parameters:
		784	[in] Handle : The handle that identifies the device.
		785	[in] InSel : The input line to configure (see CVInputSelect enum).
		786	[out] InPol : The input line polarity (see CVIOPolarity enum).
		787	[out] LEDPol : The output LED polarity (see CVLEDPolarity enum).
		788	-----------------------------------------------------------------------------
		789	Returns:
		790	An error code about the execution of the function.
		791	-----------------------------------------------------------------------------
		792	Description:
		793	The function permits to read the configuration of the input lines.
		794	*/
		795	CAENVME_API
		796	CAENVME_GetInputConf(int32_t Handle, CVInputSelect InSel, CVIOPolarity *InPol,
		797	CVLEDPolarity *LEDPol);
		798
		799	/*
		800	CAENVME_ReadRegister
		801	-----------------------------------------------------------------------------
		802	Parameters:
		803	[in] Handle : The handle that identifies the device.
		804	[in] Reg : The internal register to read (see CVRegisters enum).
		805	[out] Data : The data read from the module.
		806	-----------------------------------------------------------------------------
		807	Returns:
		808	An error code about the execution of the function.
		809	-----------------------------------------------------------------------------
		810	Description:
		811	The function permits to read all internal registers.
		812	*/
		813	CAENVME_API
		814	CAENVME_ReadRegister(int32_t Handle, CVRegisters Reg, unsigned int *Data);
		815
		816	/*
		817	CAENVME_WriteRegister
		818	-----------------------------------------------------------------------------
		819	Parameters:
		820	[in] Handle : The handle that identifies the device.
		821	[in] Reg : The internal register to read (see CVRegisters enum).
		822	[in] Data : The data to be written to the module.
		823	-----------------------------------------------------------------------------
		824	Returns:
		825	An error code about the execution of the function.
		826	-----------------------------------------------------------------------------
		827	Description:
		828	The function permits to write to all internal registers.
		829	*/
		830	CAENVME_API
		831	CAENVME_WriteRegister(int32_t Handle, CVRegisters Reg, unsigned int Data);
		832
		833	/*
		834	CAENVME_SetOutputRegister
		835	-----------------------------------------------------------------------------
		836	Parameters:
		837	[in] Handle : The handle that identifies the device.
		838	[in] Mask : The lines to be set.
		839	-----------------------------------------------------------------------------
		840	Returns:
		841	An error code about the execution of the function.
		842	-----------------------------------------------------------------------------
		843	Description:
		844	The function sets the lines specified. Refer the CVOutputRegisterBits
		845	enum to compose and decoding the bit mask.
		846	*/
		847	CAENVME_API
		848	CAENVME_SetOutputRegister(int32_t Handle, unsigned short Mask);
		849
		850	/*
		851	CAENVME_ClearOutputRegister
		852	-----------------------------------------------------------------------------
		853	Parameters:
		854	[in] Handle : The handle that identifies the device.
		855	[in] Mask : The IRQ lines to be cleared.
		856	-----------------------------------------------------------------------------
		857	Returns:
		858	An error code about the execution of the function.
		859	-----------------------------------------------------------------------------
		860	Description:
		861	The function clears the lines specified. Refer the CVOutputRegisterBits
		862	enum to compose and decoding the bit mask.
		863	*/
		864	CAENVME_API
		865	CAENVME_ClearOutputRegister(int32_t Handle, unsigned short Mask);
		866
		867	/*
		868	CAENVME_PulseOutputRegister
		869	-----------------------------------------------------------------------------
		870	Parameters:
		871	[in] Handle : The handle that identifies the device.
		872	[in] Mask : The lines to be pulsed.
		873	-----------------------------------------------------------------------------
		874	Returns:
		875	An error code about the execution of the function.
		876	-----------------------------------------------------------------------------
		877	Description:
		878	The function produces a pulse with the lines specified by setting and
		879	then clearing them. Refer the CVOutputRegisterBits enum to compose and
		880	decoding the bit mask.
		881	*/
		882	CAENVME_API
		883	CAENVME_PulseOutputRegister(int32_t Handle, unsigned short Mask);
		884
		885	/*
		886	CAENVME_ReadDisplay
		887	-----------------------------------------------------------------------------
		888	Parameters:
		889	[in] Handle : The handle that identifies the device.
		890	[out] Value : The values read from the module (see CVDisplay enum).
		891	-----------------------------------------------------------------------------
		892	Returns:
		893	An error code about the execution of the function.
		894	-----------------------------------------------------------------------------
		895	Description:
		896	The function reads the VME data display on the front panel of the module.
		897	Refer to the CVDisplay data type definition and comments to decode the
		898	value returned.
		899	*/
		900	CAENVME_API
		901	CAENVME_ReadDisplay(int32_t Handle, CVDisplay *Value);
		902
		903	/*
		904	CAENVME_SetArbiterType
		905	-----------------------------------------------------------------------------
		906	Parameters:
		907	[in] Handle : The handle that identifies the device.
		908	[in] Value : The type of VME bus arbitration to implement (see
		909	CVArbiterTypes enum).
		910	-----------------------------------------------------------------------------
		911	Returns:
		912	An error code about the execution of the function.
		913	-----------------------------------------------------------------------------
		914	Description:
		915	The function sets the behaviour of the VME bus arbiter on the module.
		916	*/
		917	CAENVME_API
		918	CAENVME_SetArbiterType(int32_t Handle, CVArbiterTypes Value);
		919
		920	/*
		921	CAENVME_SetRequesterType
		922	-----------------------------------------------------------------------------
		923	Parameters:
		924	[in] Handle : The handle that identifies the device.
		925	[in] Value : The type of VME bus requester to implement (see
		926	CVRequesterTypes enum).
		927	-----------------------------------------------------------------------------
		928	Returns:
		929	An error code about the execution of the function.
		930	-----------------------------------------------------------------------------
		931	Description:
		932	The function sets the behaviour of the VME bus requester on the module.
		933	*/
		934	CAENVME_API
		935	CAENVME_SetRequesterType(int32_t Handle, CVRequesterTypes Value);
		936
		937	/*
		938	CAENVME_SetReleaseType
		939	-----------------------------------------------------------------------------
		940	Parameters:
		941	[in] Handle : The handle that identifies the device.
		942	[in] Value : The type of VME bus release policy to implement (see
		943	CVReleaseTypes enum).
		944	-----------------------------------------------------------------------------
		945	Returns:
		946	An error code about the execution of the function.
		947	-----------------------------------------------------------------------------
		948	Description:
		949	The function sets the release policy of the VME bus on the module.
		950	*/
		951	CAENVME_API
		952	CAENVME_SetReleaseType(int32_t Handle, CVReleaseTypes Value);
		953
		954	/*
		955	CAENVME_SetBusReqLevel
		956	-----------------------------------------------------------------------------
		957	Parameters:
		958	[in] Handle : The handle that identifies the device.
		959	[in] Value : The type of VME bus requester priority level to set
		960	(see CVBusReqLevels enum).
		961	-----------------------------------------------------------------------------
		962	Returns:
		963	An error code about the execution of the function.
		964	-----------------------------------------------------------------------------
		965	Description:
		966	The function sets the specified VME bus requester priority level on
		967	the module.
		968	*/
		969	CAENVME_API
		970	CAENVME_SetBusReqLevel(int32_t Handle, CVBusReqLevels Value);
		971
		972	/*
		973	CAENVME_SetTimeout
		974	-----------------------------------------------------------------------------
		975	Parameters:
		976	[in] Handle : The handle that identifies the device.
		977	[in] Value : The value of VME bus timeout to set (see
		978	CVVMETimeouts enum).
		979	-----------------------------------------------------------------------------
		980	Returns:
		981	An error code about the execution of the function.
		982	-----------------------------------------------------------------------------
		983	Description:
		984	The function sets the specified VME bus timeout on the module.
		985	*/
		986	CAENVME_API
		987	CAENVME_SetTimeout(int32_t Handle, CVVMETimeouts Value);
		988
		989	/*
		990	CAENVME_SetLocationMonitor
		991	-----------------------------------------------------------------------------
		992	Parameters:
		993	[in] Handle : The handle that identifies the device.
		994	[in] Address : The addres to be monitored.
		995	[in] Write : Flag to specify read or write cycle types.
		996	[in] Lword : Flag to specify long word cycle type.
		997	[in] Iack : Flag to specify interrupt acknowledge cycle type.
		998
		999	-----------------------------------------------------------------------------
		1000	Returns:
		1001	An error code about the execution of the function.
		1002	-----------------------------------------------------------------------------
		1003	Description:
		1004	The function sets the Location Monitor.
		1005	*/
		1006	CAENVME_API
		1007	CAENVME_SetLocationMonitor(int32_t Handle, uint32_t Address, CVAddressModifier Am,
		1008	short Write, short Lword, short Iack);
		1009	/*
		1010	CAENVME_SetFIFOMode
		1011	-----------------------------------------------------------------------------
		1012	Parameters:
		1013	[in] Handle : The handle that identifies the device.
		1014	[in] Value : Enable/disable the FIFO mode.
		1015	-----------------------------------------------------------------------------
		1016	Returns:
		1017	An error code about the execution of the function.
		1018	-----------------------------------------------------------------------------
		1019	Description:
		1020	The function enables/disables the auto increment of the VME addresses
		1021	during the block transfer cycles. With the FIFO mode enabled the
		1022	addresses are not incremented.
		1023	*/
		1024	CAENVME_API
		1025	CAENVME_SetFIFOMode(int32_t Handle, short Value);
		1026
		1027	/*
		1028	CAENVME_GetArbiterType
		1029	-----------------------------------------------------------------------------
		1030	Parameters:
		1031	[in] Handle : The handle that identifies the device.
		1032	[out] Value : The type of VME bus arbitration implemented (see
		1033	CVArbiterTypes enum).
		1034	-----------------------------------------------------------------------------
		1035	Returns:
		1036	An error code about the execution of the function.
		1037	-----------------------------------------------------------------------------
		1038	Description:
		1039	The function get the type of VME bus arbiter implemented on the module.
		1040	*/
		1041	CAENVME_API
		1042	CAENVME_GetArbiterType(int32_t Handle, CVArbiterTypes *Value);
		1043
		1044	/*
		1045	CAENVME_GetRequesterType
		1046	-----------------------------------------------------------------------------
		1047	Parameters:
		1048	[in] Handle : The handle that identifies the device.
		1049	[out] Value : The type of VME bus requester implemented (see
		1050	CVRequesterTypes enum).
		1051	-----------------------------------------------------------------------------
		1052	Returns:
		1053	An error code about the execution of the function.
		1054	-----------------------------------------------------------------------------
		1055	Description:
		1056	The function get the type of VME bus requester implemented on the module.
		1057	*/
		1058	CAENVME_API
		1059	CAENVME_GetRequesterType(int32_t Handle, CVRequesterTypes *Value);
		1060
		1061	/*
		1062	CAENVME_GetReleaseType
		1063	-----------------------------------------------------------------------------
		1064	Parameters:
		1065	[in] Handle : The handle that identifies the device.
		1066	[out] Value : The type of VME bus release policy implemented (see
		1067	CVReleaseTypes enum).
		1068	-----------------------------------------------------------------------------
		1069	Returns:
		1070	An error code about the execution of the function.
		1071	-----------------------------------------------------------------------------
		1072	Description:
		1073	The function get the type of VME bus release implemented on the module.
		1074	*/
		1075	CAENVME_API
		1076	CAENVME_GetReleaseType(int32_t Handle, CVReleaseTypes *Value);
		1077
		1078	/*
		1079	CAENVME_GetBusReqLevel
		1080	-----------------------------------------------------------------------------
		1081	Parameters:
		1082	[in] Handle : The handle that identifies the device.
		1083	[out] Value : The type of VME bus requester priority level (see
		1084	CVBusReqLevels enum).
		1085	-----------------------------------------------------------------------------
		1086	Returns:
		1087	An error code about the execution of the function.
		1088	-----------------------------------------------------------------------------
		1089	Description:
		1090	The function reads the specified VME bus requester priority level on
		1091	the module.
		1092	*/
		1093	CAENVME_API
		1094	CAENVME_GetBusReqLevel(int32_t Handle, CVBusReqLevels *Value);
		1095
		1096	/*
		1097	CAENVME_GetTimeout
		1098	-----------------------------------------------------------------------------
		1099	Parameters:
		1100	[in] Handle : The handle that identifies the device.
		1101	[out] Value : The value of VME bus timeout (see CVVMETimeouts enum).
		1102	-----------------------------------------------------------------------------
		1103	Returns:
		1104	An error code about the execution of the function.
		1105	-----------------------------------------------------------------------------
		1106	Description:
		1107	The function sets the specified VME bus timeout on the module.
		1108	*/
		1109	CAENVME_API
		1110	CAENVME_GetTimeout(int32_t Handle, CVVMETimeouts *Value);
		1111
		1112	/*
		1113	CAENVME_GetFIFOMode
		1114	-----------------------------------------------------------------------------
		1115	Parameters:
		1116	[in] Handle : The handle that identifies the device.
		1117	[out] Value : The FIFO mode read setting.
		1118	-----------------------------------------------------------------------------
		1119	Returns:
		1120	An error code about the execution of the function.
		1121	-----------------------------------------------------------------------------
		1122	Description:
		1123	The function read if the auto increment of the VME addresses during the
		1124	block transfer cycles is enabled (0) or disabled (!=0).
		1125	*/
		1126	CAENVME_API
		1127	CAENVME_GetFIFOMode(int32_t Handle, short *Value);
		1128
		1129	/*
		1130	CAENVME_SystemReset
		1131	-----------------------------------------------------------------------------
		1132	Parameters:
		1133	[in] Handle : The handle that identifies the device.
		1134	-----------------------------------------------------------------------------
		1135	Returns:
		1136	An error code about the execution of the function.
		1137	-----------------------------------------------------------------------------
		1138	Description:
		1139	The function performs a system reset on the module.
		1140	*/
		1141	CAENVME_API
		1142	CAENVME_SystemReset(int32_t Handle);
		1143
		1144	/*
		1145	CAENVME_ResetScalerCount
		1146	-----------------------------------------------------------------------------
		1147	Parameters:
		1148	[in] Handle : The handle that identifies the device.
		1149	-----------------------------------------------------------------------------
		1150	Returns:
		1151	An error code about the execution of the function.
		1152	-----------------------------------------------------------------------------
		1153	Description:
		1154	The function resets the counter of the scaler..
		1155	*/
		1156	CAENVME_API
		1157	CAENVME_ResetScalerCount(int32_t Handle);
		1158
		1159	/*
		1160	CAENVME_EnableScalerGate
		1161	-----------------------------------------------------------------------------
		1162	Parameters:
		1163	[in] Handle : The handle that identifies the device.
		1164	-----------------------------------------------------------------------------
		1165	Returns:
		1166	An error code about the execution of the function.
		1167	-----------------------------------------------------------------------------
		1168	Description:
		1169	The function enables the gate of the scaler.
		1170	*/
		1171	CAENVME_API
		1172	CAENVME_EnableScalerGate(int32_t Handle);
		1173
		1174	/*
		1175	CAENVME_DisableScalerGate
		1176	-----------------------------------------------------------------------------
		1177	Parameters:
		1178	[in] Handle : The handle that identifies the device.
		1179	-----------------------------------------------------------------------------
		1180	Returns:
		1181	An error code about the execution of the function.
		1182	-----------------------------------------------------------------------------
		1183	Description:
		1184	The function disables the gate of the scaler.
		1185	*/
		1186	CAENVME_API
		1187	CAENVME_DisableScalerGate(int32_t Handle);
		1188
		1189	/*
		1190	CAENVME_StartPulser
		1191	-----------------------------------------------------------------------------
		1192	Parameters:
		1193	[in] Handle : The handle that identifies the device.
		1194	[in] PulSel : The pulser to configure (see CVPulserSelect enum).
		1195	-----------------------------------------------------------------------------
		1196	Returns:
		1197	An error code about the execution of the function.
		1198	-----------------------------------------------------------------------------
		1199	Description:
		1200	The function starts the generation of pulse burst if the specified
		1201	pulser is configured for manual/software operation.
		1202	*/
		1203	CAENVME_API
		1204	CAENVME_StartPulser(int32_t Handle, CVPulserSelect PulSel);
		1205
		1206	/*
		1207	CAENVME_StopPulser
		1208	-----------------------------------------------------------------------------
		1209	Parameters:
		1210	[in] Handle : The handle that identifies the device.
		1211	[in] PulSel : The pulser to configure (see CVPulserSelect enum).
		1212	-----------------------------------------------------------------------------
		1213	Returns:
		1214	An error code about the execution of the function.
		1215	-----------------------------------------------------------------------------
		1216	Description:
		1217	The function stops the generation of pulse burst if the specified
		1218	pulser is configured for manual/software operation.
		1219	*/
		1220	CAENVME_API
		1221	CAENVME_StopPulser(int32_t Handle, CVPulserSelect PulSel);
		1222
		1223	/*
		1224	CAENVME_WriteFlashPage
		1225	-----------------------------------------------------------------------------
		1226	Parameters:
		1227	[in] Handle : The handle that identifies the device.
		1228	[in] Data : The data to write.
		1229	[in] PageNum : The flash page number to write.
		1230	-----------------------------------------------------------------------------
		1231	Returns:
		1232	An error code about the execution of the function.
		1233	-----------------------------------------------------------------------------
		1234	Description:
		1235	The function writes the data into the specified flash page.
		1236	*/
		1237	CAENVME_API
		1238	CAENVME_WriteFlashPage(int32_t Handle, unsigned char *Data, int PageNum);
		1239
		1240	/*
		1241	CAENVME_ReadFlashPage
		1242	-----------------------------------------------------------------------------
		1243	Parameters:
		1244	[in] Handle : The handle that identifies the device.
		1245	[out] Data : The data to write.
		1246	[in] PageNum : The flash page number to write.
		1247	-----------------------------------------------------------------------------
		1248	Returns:
		1249	An error code about the execution of the function.
		1250	-----------------------------------------------------------------------------
		1251	Description:
		1252	The function reads the data from the specified flash page.
		1253	*/
		1254	CAENVME_API
		1255	CAENVME_ReadFlashPage(int32_t Handle, unsigned char *Data, int PageNum);
		1256
		1257	/*
		1258	CAENVME_EraseFlashPage
		1259	-----------------------------------------------------------------------------
		1260	Parameters:
		1261	[in] Handle : The handle that identifies the device.
		1262	[in] PageNum : The flash page number to write.
		1263	-----------------------------------------------------------------------------
		1264	Returns:
		1265	An error code about the execution of the function.
		1266	-----------------------------------------------------------------------------
		1267	Description:
		1268	The function erases the specified flash page.
		1269	*/
		1270	CAENVME_API
		1271	CAENVME_EraseFlashPage(int32_t Handle, int Pagenum);
		1272
		1273	#ifdef LINUX
		1274	/*
		1275	CAENVME_BLTReadAsync
		1276	-----------------------------------------------------------------------------
		1277	Parameters:
		1278	[in] Handle : The handle that identifies the device.
		1279	[in] Address : The VME bus address.
		1280	[out] Buffer : The data read from the VME bus.
		1281	[in] Size : The size of the transfer in bytes.
		1282	[in] AM : The address modifier (see CVAddressModifier enum).
		1283	[in] DW : The data width.(see CVDataWidth enum).
		1284	-----------------------------------------------------------------------------
		1285	Returns:
		1286	An error code about the execution of the function.
		1287	-----------------------------------------------------------------------------
		1288	Description:
		1289	The function starts a VME block transfer read cycle. It can be used
		1290	to perform MBLT transfers using 64 bit data width.
		1291	This function cannot be used with the V1718 USB bridge.
		1292	This function can be used only on Linux platforms.
		1293	Take care to call the CAENVME_BLTReadWait function before any other
		1294	call to a CAENVMElib function with the same handle.
		1295	*/
		1296	CAENVME_API
		1297	CAENVME_BLTReadAsync(int32_t Handle, uint32_t Address, void *Buffer,
		1298	int Size, CVAddressModifier AM, CVDataWidth DW);
		1299
		1300	/*
		1301	CAENVME_BLTReadWait
		1302	-----------------------------------------------------------------------------
		1303	Parameters:
		1304	[in] Handle : The handle that identifies the device.
		1305	[out] Count : The number of bytes transferred.
		1306	-----------------------------------------------------------------------------
		1307	Returns:
		1308	An error code about the execution of the function.
		1309	-----------------------------------------------------------------------------
		1310	Description:
		1311	The function wait for the completion of a VME block transfer read
		1312	cycle started with the CAENVME_BLTReadAsync function call.
		1313	This function cannot be used with the V1718 USB bridge.
		1314	This function can be used only on Linux platforms.
		1315	*/
		1316	CAENVME_API
		1317	CAENVME_BLTReadWait(int32_t Handle, int *Count);
		1318
		1319	#endif
		1320
		1321	#ifdef __cplusplus
		1322	}
		1323	#endif // __cplusplus
		1324
		1325	#endif // __CAENVMELIB_H

Subversion Repositories f9daq

(root)/pts/CAENVMElib.h – Rev 52