WebSVN - f9daq - Blame - Rev 146 - /lab/sipmscan/trunk/src/connections.cpp

Rev	Author	Line No.	Line
146	f9daq	1	#include "../include/sipmscan.h"
		2	#include "../include/workstation.h"
		3
		4	#include <stdio.h>
		5	#include <stdlib.h>
		6
		7	int retTemp;
		8
		9	// Additional functions -------------------------------------
		10
		11	// Display the currently selected histogram in the file list
		12	void TGAppMainFrame::DisplayHistogram(char *histfile, int histtype, int opt)
		13	{
		14	char histtime[256];
		15	char ctemp[512];
		16
		17	if(DBGSIG)
		18	printf("DisplayHistogram(): Selected file: %s\n", histfile);
		19
		20	TCanvas *gCanvas = analysisCanvas->GetCanvas();
		21
		22	inroot = TFile::Open(histfile, "READ");
		23
		24	TTree header_data, meas_data;
		25	inroot->GetObject("header_data", header_data);
		26	inroot->GetObject("meas_data", meas_data);
		27
		28	// Reading the header
		29	header_data->SetBranchAddress("nrch", &evtheader.nrch);
		30	header_data->GetEntry(0);
		31	header_data->SetBranchAddress("timestamp", &evtheader.timestamp);
		32	header_data->GetEntry(0);
		33	header_data->SetBranchAddress("biasvolt", &evtheader.biasvolt);
		34	header_data->GetEntry(0);
		35	header_data->SetBranchAddress("xpos", &evtheader.xpos);
		36	header_data->GetEntry(0);
		37	header_data->SetBranchAddress("ypos", &evtheader.ypos);
		38	header_data->GetEntry(0);
		39	header_data->SetBranchAddress("zpos", &evtheader.zpos);
		40	header_data->GetEntry(0);
		41	header_data->SetBranchAddress("temperature", &evtheader.temperature);
		42	header_data->GetEntry(0);
		43	if( header_data->FindBranch("angle") )
		44	{
		45	header_data->SetBranchAddress("angle", &evtheader.angle);
		46	header_data->GetEntry(0);
		47	}
		48	header_data->SetBranchAddress("laserinfo", &evtheader.laserinfo);
		49	header_data->GetEntry(0);
		50
		51	// Change timestamp to local time
		52	GetTime(evtheader.timestamp, histtime);
		53
		54	// Displaying header information debug
		55	if(DBGSIG)
		56	{
		57	printf("DisplayHistogram(): Opened file header information:\n");
		58	printf("- Number of channels (ADC and TDC are considered as separate channels): %d\n", evtheader.nrch);
		59	printf("- Timestamp: %d (%s)\n", evtheader.timestamp, histtime);
		60	printf("- Bias voltage: %lf\n", evtheader.biasvolt);
		61	printf("- Table position (X,Y,Z): %d, %d, %d\n", evtheader.xpos, evtheader.ypos, evtheader.zpos);
		62	if(evtheader.temperature)
		63	printf("- Temperature: %lf\n", evtheader.temperature);
		64	if( header_data->FindBranch("angle") )
		65	printf("- Incidence angle: %lf\n", evtheader.angle);
		66	else
		67	printf("- Incidence angle: No angle information!\n");
		68	printf("- Laser and filter settings: %s\n", evtheader.laserinfo);
		69	}
		70
		71	// Displaying header information on the GUI
		72	dispTime->widgetTE->SetText(histtime);
		73	dispBias->widgetNE[0]->SetNumber(evtheader.biasvolt);
		74	sprintf(ctemp, "%d, %d, %d", evtheader.xpos, evtheader.ypos, evtheader.zpos);
		75	dispPos->widgetTE->SetText(ctemp);
		76	if(evtheader.temperature)
		77	dispTemp->widgetNE[0]->SetNumber(evtheader.temperature);
		78	else
		79	dispTemp->widgetNE[0]->SetNumber(0.0);
		80	if( header_data->FindBranch("angle") )
		81	dispAngle->widgetNE[0]->SetNumber(evtheader.angle);
		82	else
		83	dispAngle->widgetNE[0]->SetNumber(0.0);
		84	dispLaser->widgetTE->SetText(evtheader.laserinfo);
		85
		86	selectCh->widgetNE[0]->SetLimitValues(0, (evtheader.nrch/2)-1);
		87
		88	// Redraw the histograms
		89	int j;
		90	char rdc[256];
		91	char rdcsel[256];
		92
		93	j = selectCh->widgetNE[0]->GetNumber();
		94
		95	printf("Found %d data points.\n", (int)meas_data->GetEntries());
		96
		97	gCanvas->cd();
		98	double range[4];
		99	range[0] = adcRange->widgetNE[0]->GetNumber();
		100	range[1] = adcRange->widgetNE[1]->GetNumber();
		101	range[2] = tdcRange->widgetNE[0]->GetNumber();
		102	range[3] = tdcRange->widgetNE[1]->GetNumber();
		103
		104	// ADC histogram
		105	if(histtype == 0)
		106	{
		107	if( range[0] == range[1] )
		108	sprintf(rdc, "ADC%d>>%s", j, histname);
		109	else
		110	sprintf(rdc, "ADC%d>>%s(%d,%lf,%lf)", j, histname, (int)(range[1]-range[0]), range[0]-0.5, range[1]-0.5);
		111
		112	sprintf(rdcsel, "(TDC%d>%lf)&&(TDC%d<%lf)", j, range[2]tdctimeconversion, j, range[3]tdctimeconversion);
		113	meas_data->Draw(rdc, rdcsel);
		114
		115	sprintf(rdc, "ADC%d, Vbias=%.3lf, TDC=(%.2lf,%.2lf);ADC;", j, evtheader.biasvolt, range[2], range[3]);
		116	TH1F histtemp = (TH1F)gCanvas->GetPrimitive(histname);
		117	if(!cleanPlots)
		118	histtemp->SetTitle(rdc);
		119	else
		120	histtemp->SetTitle(";ADC;");
		121	histtemp->GetXaxis()->SetLabelSize(0.025);
		122	histtemp->GetXaxis()->CenterTitle(kTRUE);
		123	histtemp->GetYaxis()->SetLabelSize(0.025);
		124	if(cleanPlots)
		125	{
		126	TGaxis yax = (TGaxis)histtemp->GetYaxis();
		127	yax->SetMaxDigits(4);
		128	}
		129
		130	gCanvas->Modified();
		131	gCanvas->Update();
		132
		133	if( yRange->widgetNE[0]->GetNumber() != yRange->widgetNE[1]->GetNumber() )
		134	{
		135	if( (histOpt->widgetChBox[0]->IsDown()) && (yRange->widgetNE[0]->GetNumber() <= 0) )
		136	{
		137	histtemp->GetYaxis()->SetRangeUser(0.5, yRange->widgetNE[1]->GetNumber());
		138	yRange->widgetNE[0]->SetNumber(0.5);
		139	logChange = 1;
		140	}
		141	else
		142	{
		143	gCanvas->SetLogy(kFALSE);
		144	if(logChange == 1)
		145	{
		146	yRange->widgetNE[0]->SetNumber(0.0);
		147	logChange = 0;
		148	}
		149	histtemp->GetYaxis()->SetRangeUser(yRange->widgetNE[0]->GetNumber(), yRange->widgetNE[1]->GetNumber());
		150	}
		151	}
		152
		153	TPaveStats stats = (TPaveStats)histtemp->FindObject("stats");
		154	if(!cleanPlots)
		155	{
		156	stats->SetX1NDC(0.84); stats->SetX2NDC(0.97);
		157	stats->SetY1NDC(0.87); stats->SetY2NDC(0.97);
		158	}
		159	else
		160	{
		161	stats->SetX1NDC(1.1); stats->SetX2NDC(1.3);
		162	stats->SetY1NDC(1.1); stats->SetY2NDC(1.3);
		163	}
		164	}
		165	// TDC histogram
		166	else if(histtype == 1)
		167	{
		168	if( range[0] == range[1] )
		169	sprintf(rdc, "(TDC%d/%lf)>>%s", j, tdctimeconversion, histname);
		170	else
		171	sprintf(rdc, "(TDC%d/%lf)>>%s(%d,%lf,%lf)", j, tdctimeconversion, histname, (int)((range[3]-range[2])*tdctimeconversion), range[2], range[3]);
		172
		173	sprintf(rdcsel, "(TDC%d>%lf)&&(TDC%d<%lf)", j, range[2]tdctimeconversion, j, range[3]tdctimeconversion);
		174	meas_data->Draw(rdc, rdcsel);
		175
		176	sprintf(rdc, "TDC%d, Vbias=%.3lf, TDC=(%.2lf,%.2lf);Time (TDC channel) [ns];", j, evtheader.biasvolt, range[2], range[3]);
		177	TH1F histtemp = (TH1F)gCanvas->GetPrimitive(histname);
		178	if(!cleanPlots)
		179	histtemp->SetTitle(rdc);
		180	else
		181	histtemp->SetTitle(";Time (TDC channel) [ns];");
		182	histtemp->GetXaxis()->SetLabelSize(0.025);
		183	histtemp->GetXaxis()->CenterTitle(kTRUE);
		184	histtemp->GetYaxis()->SetLabelSize(0.025);
		185	if(cleanPlots)
		186	{
		187	TGaxis yax = (TGaxis)histtemp->GetYaxis();
		188	yax->SetMaxDigits(4);
		189	}
		190
		191	gCanvas->Modified();
		192	gCanvas->Update();
		193
		194	if( yRange->widgetNE[0]->GetNumber() != yRange->widgetNE[1]->GetNumber() )
		195	{
		196	if( (histOpt->widgetChBox[0]->IsDown()) && (yRange->widgetNE[0]->GetNumber() <= 0) )
		197	{
		198	histtemp->GetYaxis()->SetRangeUser(0.5, yRange->widgetNE[1]->GetNumber());
		199	yRange->widgetNE[0]->SetNumber(0.5);
		200	logChange = 1;
		201	}
		202	else
		203	{
		204	gCanvas->SetLogy(kFALSE);
		205	if(logChange == 1)
		206	{
		207	yRange->widgetNE[0]->SetNumber(0.0);
		208	logChange = 0;
		209	}
		210	histtemp->GetYaxis()->SetRangeUser(yRange->widgetNE[0]->GetNumber(), yRange->widgetNE[1]->GetNumber());
		211	}
		212	}
		213
		214	TPaveStats stats = (TPaveStats)histtemp->FindObject("stats");
		215	if(!cleanPlots)
		216	{
		217	stats->SetX1NDC(0.84); stats->SetX2NDC(0.97);
		218	stats->SetY1NDC(0.87); stats->SetY2NDC(0.97);
		219	}
		220	else
		221	{
		222	stats->SetX1NDC(1.1); stats->SetX2NDC(1.3);
		223	stats->SetY1NDC(1.1); stats->SetY2NDC(1.3);
		224	}
		225	}
		226	// ADC vs. TDC histogram
		227	else if(histtype == 2)
		228	{
		229	if( ((range[0] == range[1]) && (range[2] == range[3])) \|\| (range[2] == range[3]) \|\| (range[0] == range[1]) )
		230	sprintf(rdc, "(TDC%d/%lf):ADC%d>>%s", j, tdctimeconversion, j, histname);
		231	else
		232	sprintf(rdc, "(TDC%d/%lf):ADC%d>>%s(%d,%lf,%lf,%d,%lf,%lf)", j, tdctimeconversion, j, histname, (int)(range[1]-range[0])/2, range[0]-0.5, range[1]-0.5, (int)((range[3]-range[2])*tdctimeconversion)/2, range[2], range[3]);
		233	meas_data->Draw(rdc,"","COLZ");
		234
		235	sprintf(rdc, "ADC/TDC%d, Vbias=%.3lf, TDC=(%.2lf,%.2lf);ADC;TDC", j, evtheader.biasvolt, range[2], range[3]);
		236	TH2F histtemp = (TH2F)gCanvas->GetPrimitive(histname);
		237	if(!cleanPlots)
		238	histtemp->SetTitle(rdc);
		239	else
		240	histtemp->SetTitle(";ADC;Time (TDC channel) [ns]");
		241	histtemp->GetXaxis()->SetLabelSize(0.025);
		242	histtemp->GetXaxis()->CenterTitle(kTRUE);
		243	histtemp->GetYaxis()->SetLabelSize(0.025);
		244	histtemp->GetYaxis()->CenterTitle(kTRUE);
		245	histtemp->GetYaxis()->SetTitleOffset(1.35);
		246	if(cleanPlots)
		247	{
		248	TGaxis yax = (TGaxis)histtemp->GetYaxis();
		249	yax->SetMaxDigits(4);
		250	}
		251
		252	gCanvas->Modified();
		253	gCanvas->Update();
		254
		255	TPaveStats stats = (TPaveStats)histtemp->FindObject("stats");
		256	stats->SetX1NDC(1.1); stats->SetX2NDC(1.3);
		257	stats->SetY1NDC(1.1); stats->SetY2NDC(1.3);
		258
		259	TPaletteAxis gpalette = (TPaletteAxis)histtemp->GetListOfFunctions()->FindObject("palette");
		260	gpalette->SetLabelSize(0.022);
		261	}
		262
		263	if(histtype < 2)
		264	{
		265	if( histOpt->widgetChBox[0]->IsDown() )
		266	gCanvas->SetLogy(kTRUE);
		267	else if( !histOpt->widgetChBox[0]->IsDown() )
		268	gCanvas->SetLogy(kFALSE);
		269	}
		270	else
		271	gCanvas->SetLogy(kFALSE);
		272
		273	gCanvas->Modified();
		274	gCanvas->Update();
		275
		276	delete header_data;
		277	delete meas_data;
		278
		279	// Delete the opened file when we just display it in the analysis canvas (otherwise wait for histogram save)
		280	if(opt != 1)
		281	delete inroot;
		282
		283	// If you close the opened file (delete inroot), the data can not be accessed by other functions (any time we wish to use the data directly from histogram, we need to call the DisplayHistogram function -> using different opt to determine what we need to do)
		284	}
		285
		286	// Start a measurement (acquisition from CAMAC)
		287	void TGAppMainFrame::RunMeas(void *ptr, int runCase, int &scanon)
		288	{
		289	int vscan = 0, pscan = 0, zscan = 0, ascan = 0;
		290	if(scansOn->widgetChBox[0]->IsDown()) vscan = 1;
		291	if(scansOn->widgetChBox[1]->IsDown()) pscan = 1;
		292	if(scansOn->widgetChBox[2]->IsDown()) zscan = 1;
		293	if(scansOn->widgetChBox[3]->IsDown()) ascan = 1;
		294
		295	printf("Start of Run, run case %d\n", runCase);
		296
		297	float progVal;
		298
		299	char ctemp[256];
		300	char ctemp2[256];
		301	char fname[256];
		302	int itemp = 0;
		303	TH1F *liveHist;
		304
		305	float minVoltage, maxVoltage, stepVoltage, diffVoltage;
		306	float minXpos, maxXpos, stepXpos, diffXpos;
		307	float minYpos, maxYpos, stepYpos, diffYpos;
		308	float minZpos, maxZpos, stepZpos, diffZpos;
		309	float minAlpha, maxAlpha, stepAlpha, diffAlpha;
		310
		311	minVoltage = vOutStart->widgetNE[0]->GetNumber();
		312	maxVoltage = vOutStop->widgetNE[0]->GetNumber();
		313	diffVoltage = abs(maxVoltage - minVoltage);
		314	stepVoltage = abs(vOutStep->widgetNE[0]->GetNumber());
		315	minXpos = xPosMin->widgetNE[0]->GetNumber();
		316	maxXpos = xPosMax->widgetNE[0]->GetNumber();
		317	diffXpos = abs(maxXpos - minXpos);
		318	stepXpos = abs(xPosStep->widgetNE[0]->GetNumber());
		319	minYpos = yPosMin->widgetNE[0]->GetNumber();
		320	maxYpos = yPosMax->widgetNE[0]->GetNumber();
		321	diffYpos = abs(maxYpos - minYpos);
		322	stepYpos = abs(yPosStep->widgetNE[0]->GetNumber());
		323	minZpos = zPosMin->widgetNE[0]->GetNumber();
		324	maxZpos = zPosMax->widgetNE[0]->GetNumber();
		325	diffZpos = abs(maxZpos - minZpos);
		326	stepZpos = abs(zPosStep->widgetNE[0]->GetNumber());
		327	minAlpha = rotPosMin->widgetNE[0]->GetNumber();
		328	maxAlpha = rotPosMax->widgetNE[0]->GetNumber();
		329	diffAlpha = abs(maxAlpha - minAlpha);
		330	stepAlpha = abs(rotPosStep->widgetNE[0]->GetNumber());
		331
		332	remove_ext((char*)fileName->widgetTE->GetText(), ctemp);
		333
		334	// TODO - angle scan + voltage scan
		335	// Voltage or surface scan
		336	if( vscan \|\| pscan \|\| ascan )
		337	{
		338	// No Z scan, No angle scan
		339	if(!zscan && !ascan)
		340	{
		341	// When we have a voltage scan
		342	if( vscan && (stepVoltage > 0.) )
		343	SeqNumber(runCase, (int)diffVoltage/stepVoltage, ctemp2);
		344	// With only a surface scan
		345	else if(pscan)
		346	{
		347	if( stepXpos == 0 )
		348	itemp = 1;
		349	else
		350	itemp = (int)diffXpos/stepXpos;
		351
		352	if( stepYpos == 0 )
		353	itemp *= 1;
		354	else
		355	itemp *= (int)diffYpos/stepYpos;
		356	SeqNumber(runCase, itemp, ctemp2);
		357	}
		358	sprintf(fname, "%s_%s%s", ctemp, ctemp2, histext);
		359	}
		360	// With Z scan, No angle scan
		361	else if(zscan && !ascan)
		362	{
		363	SeqNumber((int)zPos->widgetNE[0]->GetNumber(), maxZpos, ctemp2);
		364
		365	// Voltage scan is on
		366	if( vscan && (stepVoltage > 0.) )
		367	{
		368	sprintf(fname, "%s_z%s_", ctemp, ctemp2);
		369	SeqNumber(runCase, (int)diffVoltage/stepVoltage+1, ctemp2);
		370	strcat(fname, ctemp2);
		371	strcat(fname, histext);
		372	}
		373	// Surface scan is on
		374	else if(pscan)
		375	{
		376	sprintf(fname, "%s_z%s_", ctemp, ctemp2);
		377
		378	if( stepXpos == 0 )
		379	itemp = 1;
		380	else
		381	itemp = (int)diffXpos/stepXpos+1;
		382
		383	if( stepYpos == 0 )
		384	itemp *= 1;
		385	else
		386	itemp *= (int)diffYpos/stepYpos+1;
		387	SeqNumber(runCase, itemp, ctemp2);
		388	strcat(fname, ctemp2);
		389	strcat(fname, histext);
		390	}
		391	// Just Z scan
		392	else
		393	sprintf(fname, "%s_z%s%s", ctemp, ctemp2, histext);
		394	}
		395	// No Z scan, With angle scan
		396	else if(!zscan && ascan)
		397	{
		398	SeqNumber(runCase, (int)diffAlpha/stepAlpha, ctemp2);
		399
		400	// Voltage scan is on
		401	if( vscan && (stepVoltage > 0.) )
		402	{
		403	sprintf(fname, "%s_phi%s_", ctemp, ctemp2);
		404	SeqNumber(runCase, (int)diffVoltage/stepVoltage+1, ctemp2);
		405	strcat(fname, ctemp2);
		406	strcat(fname, histext);
		407	}
		408	// Just angle scan
		409	else
		410	sprintf(fname, "%s_phi%s%s", ctemp, ctemp2, histext);
		411	}
		412	}
		413	// All the rest
		414	else if(!vscan && !pscan)
		415	sprintf(fname, "%s%s", ctemp, histext);
		416
		417	// Check if set voltage is below the hard limit
		418	if( vOut->widgetNE[0]->GetNumber() > vHardlimit->widgetNE[0]->GetNumber() )
		419	{
		420	printf("Voltage hard limit triggered (%lf > %lf)!\n", vOut->widgetNE[0]->GetNumber(), vHardlimit->widgetNE[0]->GetNumber() );
		421	vOut->widgetNE[0]->SetNumber( vHardlimit->widgetNE[0]->GetNumber() );
		422	}
		423
		424	printf("Output file is (runCase = %d): %s\n", runCase, fname);
		425
		426	// Writing to output file
		427	outroot = TFile::Open(fname, "RECREATE");
		428
		429	TTree *header_data = new TTree("header_data", "Header information for the measurement.");
		430	TTree *meas_data = new TTree("meas_data", "Saved ADC and TDC measurement data.");
		431	TTree *scope_data = new TTree("scope_data", "Saved scope measurement data.");
		432
		433	// Branches for the header
		434	header_data->Branch("nrch", &evtheader.nrch, "nrch/I");
		435	header_data->Branch("timestamp", &evtheader.timestamp, "timestamp/I");
		436	header_data->Branch("biasvolt", &evtheader.biasvolt, "biasvolt/D");
		437	header_data->Branch("xpos", &evtheader.xpos, "xpos/I");
		438	header_data->Branch("ypos", &evtheader.ypos, "ypos/I");
		439	header_data->Branch("zpos", &evtheader.zpos, "zpos/I");
		440	header_data->Branch("temperature", &evtheader.temperature, "temperature/D");
		441	header_data->Branch("angle", &evtheader.angle, "angle/D");
		442	header_data->Branch("laserinfo", &evtheader.laserinfo, "laserinfo/C");
		443
		444	evtheader.nrch = (int)NCH->widgetNE[0]->GetNumber()*2;
		445	evtheader.timestamp = (int)time(NULL);
		446	evtheader.biasvolt = (double)vOut->widgetNE[0]->GetNumber();
		447	if(posUnits->widgetCB->GetSelected() == 0)
		448	{
		449	evtheader.xpos = (int)xPos->widgetNE[0]->GetNumber();
		450	evtheader.ypos = (int)yPos->widgetNE[0]->GetNumber();
		451	evtheader.zpos = (int)zPos->widgetNE[0]->GetNumber();
		452	}
		453	else if(posUnits->widgetCB->GetSelected() == 1)
		454	{
		455	evtheader.xpos = (int)xPos->widgetNE[0]->GetNumber()/lenconversion;
		456	evtheader.ypos = (int)yPos->widgetNE[0]->GetNumber()/lenconversion;
		457	evtheader.zpos = (int)zPos->widgetNE[0]->GetNumber()/lenconversion;
		458	}
		459	evtheader.temperature = (double)chtemp->widgetNE[0]->GetNumber();
		460	if(rotUnits->widgetCB->GetSelected() == 0)
		461	evtheader.angle = (double)rotPos->widgetNE[0]->GetNumber()*rotconversion;
		462	else if(rotUnits->widgetCB->GetSelected() == 1)
		463	evtheader.angle = (double)rotPos->widgetNE[0]->GetNumber();
		464	sprintf(evtheader.laserinfo, "%s", laserInfo->widgetTE->GetText());
		465
		466	char histtime[256];
		467	GetTime(evtheader.timestamp, histtime);
		468
		469	printf("Save file header information:\n");
		470	printf("- Number of channels: %d\n", evtheader.nrch);
		471	printf("- Timestamp: %d (%s)\n", evtheader.timestamp, histtime);
		472	printf("- Bias voltage: %lf\n", evtheader.biasvolt);
		473	printf("- Table position (X,Y,Z): %d, %d, %d\n", evtheader.xpos, evtheader.ypos, evtheader.zpos);
		474	printf("- Temperature: %lf\n", evtheader.temperature);
		475	printf("- Incidence angle: %lf\n", evtheader.angle);
		476	printf("- Laser and filter settings: %s\n", evtheader.laserinfo);
		477
		478	header_data->Fill();
		479
		480	// Branches for ADC and TDC data
		481	for(int i = 0; i < evtheader.nrch/2; i++)
		482	{
		483	sprintf(ctemp, "ADC%d", i);
		484	sprintf(fname, "ADC%d/I", i);
		485	meas_data->Branch(ctemp, &evtdata.adcdata[i], fname);
		486
		487	sprintf(ctemp, "TDC%d", i);
		488	sprintf(fname, "TDC%d/I", i);
		489	meas_data->Branch(ctemp, &evtdata.tdcdata[i], fname);
		490	}
		491
		492	//TODO
		493	// Initialize the scope before measurement
		494	/* if( sCamaclink->IsDown() )
		495	InitializeScope();*/
		496
		497	// Branch for scope measurement data
		498	/* if(gScopeDaq->scopeUseType == 2) // only if we select waveform measurement
		499	{
		500	if(gScopeDaq->scopeMeasSel == 0)
		501	scope_data->Branch("amp", &evtmeas.measdata, "amp/D");
		502	else if(gScopeDaq->scopeMeasSel == 1)
		503	scope_data->Branch("area", &evtmeas.measdata, "area/D");
		504	else if(gScopeDaq->scopeMeasSel == 2)
		505	scope_data->Branch("delay", &evtmeas.measdata, "delay/D");
		506	else if(gScopeDaq->scopeMeasSel == 3)
		507	scope_data->Branch("fall", &evtmeas.measdata, "fall/D");
		508	else if(gScopeDaq->scopeMeasSel == 4)
		509	scope_data->Branch("freq", &evtmeas.measdata, "freq/D");
		510	else if(gScopeDaq->scopeMeasSel == 5)
		511	scope_data->Branch("max", &evtmeas.measdata, "max/D");
		512	else if(gScopeDaq->scopeMeasSel == 6)
		513	scope_data->Branch("mean", &evtmeas.measdata, "mean/D");
		514	else if(gScopeDaq->scopeMeasSel == 7)
		515	scope_data->Branch("min", &evtmeas.measdata, "min/D");
		516	else if(gScopeDaq->scopeMeasSel == 8)
		517	scope_data->Branch("pk2p", &evtmeas.measdata, "pk2p/D");
		518	else if(gScopeDaq->scopeMeasSel == 9)
		519	scope_data->Branch("pwidth", &evtmeas.measdata, "pwidth/D");
		520	else if(gScopeDaq->scopeMeasSel == 10)
		521	scope_data->Branch("rise", &evtmeas.measdata, "rise/D");
		522	}*/
		523
		524	int neve = (int) evtNum->widgetNE[0]->GetNumber();
		525	int allEvt, zProg;
		526	zProg = 1;
		527
		528	#if WORKSTAT == 'I'
		529	#else
		530	// ONLY FOR TESTING!
		531	TRandom *randNum = new TRandom();
		532	randNum->SetSeed(0);
		533	// ONLY FOR TESTING!
		534	#endif
		535
		536	// Initialize the CAMAC
		537	if (gDaq)
		538	{
		539	if(scanon == 0)
		540	{
		541	gDaq->init(evtheader.nrch);
		542	scanon = 1;
		543	}
		544	gDaq->fStop=0;
		545
		546	// Set the stopwatch
		547	clock_t clkt1;
		548
		549	// Prepare histogram for live histogram update
		550	int liven;
		551	TCanvas *gCanvas;
		552	if(liveUpdate && (!vscan && !pscan && !zscan && !ascan))
		553	{
		554	gCanvas = measCanvas->GetCanvas();
		555	gCanvas->SetGrid();
		556	gCanvas->cd();
		557	liveHist = new TH1F(histname,"",(int)TMath::Sqrt(neve),0,0);
		558	liven = 1;
		559	}
		560
		561	// Start gathering
		562	gDaq->start();
		563
		564	for (int n=0;n<neve && !gDaq->fStop ;/n++/)
		565	{
		566	int nb = gDaq->event(gBuf,BSIZE);
		567
		568	#if WORKSTAT == 'I'
		569	#else
		570	// ONLY FOR TESTING!
		571	for(int i=0; i < evtheader.nrch; i++)
		572	{
		573	if(i == 1)
		574	gBuf[i] = randNum->Gaus(1500,300);
		575	else if(i == 0)
		576	gBuf[i] = randNum->Poisson(2500);
		577	}
		578	// ONLY FOR TESTING!
		579	#endif
		580	if (nb<=0) n--;
		581
		582	int nc=0;
		583
		584	while ( (nb>0) && (n<neve) )
		585	{
		586	for(int i = 0; i < evtheader.nrch; i++)
		587	{
		588	unsigned short adc = gBuf[i+nc]&0xFFFF;
		589	if(i % 2 == 0) // TDC
		590	evtdata.tdcdata[i/2] = (int)adc;
		591	else if(i % 2 == 1) // ADC
		592	evtdata.adcdata[i/2] = (int)adc;
		593
		594	// Start plotting the scope waveform
		595	/* if( (gScopeDaq->scopeUseType == 1) && (sCamaclink->IsDown()) )
		596	StartScopeAcq();*/ // TODO
		597	}
		598	meas_data->Fill();
		599	n++;
		600	sleep(1);
		601
		602	// Start making a scope measurement
		603	/* if( (gScopeDaq->scopeUseType == 2) && (sCamaclink->IsDown()) )
		604	{
		605	StartScopeAcq();
		606	evtmeas.measdata = gScopeDaq->measubuf;
		607	}
		608	scope_data->Fill();*/ // TODO
		609
		610	// Start filling the histogram (only in normal single scan)
		611	if(liveUpdate && (!vscan && !pscan && !zscan && !ascan))
		612	{
		613	liveHist->Fill(evtdata.adcdata[0]);
		614	if( n == (neve*liven)/10 )
		615	{
		616	gCanvas->cd();
		617	liveHist->Draw("");
		618	gCanvas->Modified();
		619	gCanvas->Update();
		620	liven++;
		621	}
		622	}
		623
		624	nc += evtheader.nrch;
		625	nb -= evtheader.nrch;
		626	}
		627
		628	MyTimer();
		629	allEvt = n;
		630	if (gSystem->ProcessEvents()) printf("Run Interrupted\n");
		631
		632	if( acqStarted && (n == (neve*zProg)/10) && (!vscan && !pscan && !zscan && !ascan) )
		633	{
		634	// Progress the progress bar
		635	progVal = (float)zProg*10;
		636	measProgress->widgetPB->SetPosition(progVal);
		637
		638	// Calculate the remaining time
		639	TimeEstimate(clkt0, timet0, progVal, ctemp, 0);
		640	printf("End time: %s\n", ctemp);
		641	measProgress->widgetTE->SetText(ctemp);
		642
		643	gVirtualX->Update(1);
		644	zProg++;
		645	}
		646	}
		647
		648	printf("Number of gathered events: %d\n", allEvt);
		649	measProgress->widgetTB[0]->SetText("Start acquisition");
		650	acqStarted = false;
		651
		652	gDaq->stop();
		653	}
		654
		655	printf("End of Run neve=%d\n",neve);
		656
		657	header_data->Write();
		658	meas_data->Write();
		659	// scope_data->Write(); // TODO
		660	delete header_data;
		661	delete meas_data;
		662	delete scope_data;
		663
		664	// Remove the histogram
		665	if(liveUpdate && (!vscan && !pscan && !zscan && !ascan))
		666	delete liveHist;
		667
		668
		669	outroot->Close();
		670	}
		671
		672	int TGAppMainFrame::MyTimer()
		673	{
		674	char cmd[100];
		675	GetTime(-1, cmd);
		676	if (timeStamp) timeStamp->widgetTE->SetText(cmd);
		677	return 0;
		678	}
		679
		680	// Additional functions -------------------------------------
		681
		682	// Settings pane connections --------------------------------
		683
		684	// Enable or disable scans
		685	void TGAppMainFrame::EnableScan(int type)
		686	{
		687	// Voltage scan
		688	if(type == 0)
		689	{
		690	if(scansOn->widgetChBox[type]->IsOn())
		691	{
		692	vOutStart->widgetNE[0]->SetState(kTRUE);
		693	vOutStop->widgetNE[0]->SetState(kTRUE);
		694	vOutStep->widgetNE[0]->SetState(kTRUE);
		695	}
		696	else
		697	{
		698	vOutStart->widgetNE[0]->SetState(kFALSE);
		699	vOutStop->widgetNE[0]->SetState(kFALSE);
		700	vOutStep->widgetNE[0]->SetState(kFALSE);
		701	}
		702	}
		703	// Surface (X, Y axis) scan
		704	else if(type == 1)
		705	{
		706	if(scansOn->widgetChBox[type]->IsOn())
		707	{
		708	xPosMin->widgetNE[0]->SetState(kTRUE);
		709	xPosMax->widgetNE[0]->SetState(kTRUE);
		710	xPosStep->widgetNE[0]->SetState(kTRUE);
		711	yPosMin->widgetNE[0]->SetState(kTRUE);
		712	yPosMax->widgetNE[0]->SetState(kTRUE);
		713	yPosStep->widgetNE[0]->SetState(kTRUE);
		714	}
		715	else
		716	{
		717	xPosMin->widgetNE[0]->SetState(kFALSE);
		718	xPosMax->widgetNE[0]->SetState(kFALSE);
		719	xPosStep->widgetNE[0]->SetState(kFALSE);
		720	yPosMin->widgetNE[0]->SetState(kFALSE);
		721	yPosMax->widgetNE[0]->SetState(kFALSE);
		722	yPosStep->widgetNE[0]->SetState(kFALSE);
		723	}
		724	}
		725	// Z axis scan
		726	else if(type == 2)
		727	{
		728	if(scansOn->widgetChBox[type]->IsOn())
		729	{
		730	zPosMin->widgetNE[0]->SetState(kTRUE);
		731	zPosMax->widgetNE[0]->SetState(kTRUE);
		732	zPosStep->widgetNE[0]->SetState(kTRUE);
		733	}
		734	else
		735	{
		736	zPosMin->widgetNE[0]->SetState(kFALSE);
		737	zPosMax->widgetNE[0]->SetState(kFALSE);
		738	zPosStep->widgetNE[0]->SetState(kFALSE);
		739	}
		740	}
		741	// Incidence angle scan
		742	else if(type == 3)
		743	{
		744	if(scansOn->widgetChBox[type]->IsOn())
		745	{
		746	rotPosMin->widgetNE[0]->SetState(kTRUE);
		747	rotPosMax->widgetNE[0]->SetState(kTRUE);
		748	rotPosStep->widgetNE[0]->SetState(kTRUE);
		749	}
		750	else
		751	{
		752	rotPosMin->widgetNE[0]->SetState(kFALSE);
		753	rotPosMax->widgetNE[0]->SetState(kFALSE);
		754	rotPosStep->widgetNE[0]->SetState(kFALSE);
		755	}
		756	}
		757	}
		758
		759	// Apply the upper voltage limit from settings pane to main window
		760	void TGAppMainFrame::VoltageLimit()
		761	{
		762	vOut->widgetNE[0]->SetLimitValues(0, vHardlimit->widgetNE[0]->GetNumber() );
		763	}
		764
		765	// Select the table position units to be used (1 = 0.3595 micron)
		766	void TGAppMainFrame::ChangeUnits(int type)
		767	{
		768	int pos[12], poslim[3], chng = 0;
		769	double micro[12], microlim[3];
		770
		771	TGNumberEntry *posEntries[12];
		772	posEntries[0] = (TGNumberEntry*)xPos->widgetNE[0];
		773	posEntries[1] = (TGNumberEntry*)yPos->widgetNE[0];
		774	posEntries[2] = (TGNumberEntry*)zPos->widgetNE[0];
		775	posEntries[3] = (TGNumberEntry*)xPosMin->widgetNE[0];
		776	posEntries[4] = (TGNumberEntry*)xPosMax->widgetNE[0];
		777	posEntries[5] = (TGNumberEntry*)xPosStep->widgetNE[0];
		778	posEntries[6] = (TGNumberEntry*)yPosMin->widgetNE[0];
		779	posEntries[7] = (TGNumberEntry*)yPosMax->widgetNE[0];
		780	posEntries[8] = (TGNumberEntry*)yPosStep->widgetNE[0];
		781	posEntries[9] = (TGNumberEntry*)zPosMin->widgetNE[0];
		782	posEntries[10] = (TGNumberEntry*)zPosMax->widgetNE[0];
		783	posEntries[11] = (TGNumberEntry*)zPosStep->widgetNE[0];
		784
		785	// Table position values
		786	if(type == 0)
		787	{
		788	// Check if we had microns before
		789	if(posEntries[0]->GetNumStyle() == TGNumberFormat::kNESRealTwo)
		790	chng = 1;
		791
		792	// Change to table position values
		793	if(chng == 1)
		794	{
		795	for(int i = 0; i < 12; i++)
		796	{
		797	if(posEntries[i]->GetNumber() == 0.0)
		798	pos[i] = 0;
		799	else
		800	pos[i] = (int)posEntries[i]->GetNumber()/lenconversion;
		801	}
		802
		803	poslim[0] = -100;
		804	poslim[1] = 215000;
		805	poslim[2] = 375000;
		806
		807	for(int i = 0; i < 12; i++)
		808	{
		809	posEntries[i]->SetNumStyle(TGNumberFormat::kNESInteger);
		810	if( (i > 8) \|\| (i == 2) ) // limits for Z axis (longer table)
		811	posEntries[i]->SetLimits(TGNumberFormat::kNELLimitMinMax, poslim[0], poslim[2]);
		812	else
		813	posEntries[i]->SetLimits(TGNumberFormat::kNELLimitMinMax, poslim[0], poslim[1]);
		814
		815	posEntries[i]->SetNumber(pos[i]);
		816	}
		817	}
		818	}
		819	// Microns
		820	else if(type == 1)
		821	{
		822	// Check if we had table position values before
		823	if(posEntries[0]->GetNumStyle() == TGNumberFormat::kNESInteger)
		824	chng = 1;
		825
		826	// Change to microns
		827	if(chng == 1)
		828	{
		829	for(int i = 0; i < 12; i++)
		830	{
		831	if(posEntries[i]->GetNumber() == 0.0)
		832	micro[i] = 0.;
		833	else
		834	micro[i] = (double)posEntries[i]->GetNumber()*lenconversion;
		835	}
		836
		837	microlim[0] = (double)-100*lenconversion;
		838	microlim[1] = (double)215000*lenconversion;
		839	microlim[2] = (double)375000*lenconversion;
		840
		841	for(int i = 0; i < 12; i++)
		842	{
		843	posEntries[i]->SetNumStyle(TGNumberFormat::kNESRealTwo);
		844	if( (i > 8) \|\| (i == 2) ) // limits for Z axis (longer table)
		845	posEntries[i]->SetLimits(TGNumberFormat::kNELLimitMinMax, microlim[0], microlim[2]);
		846	else
		847	posEntries[i]->SetLimits(TGNumberFormat::kNELLimitMinMax, microlim[0], microlim[1]);
		848
		849	posEntries[i]->SetNumber(micro[i]);
		850	}
		851	}
		852	}
		853	}
		854
		855	// Select the rotation units to be used (1 = 6.3281/3600 degrees)
		856	void TGAppMainFrame::ChangeUnitsRot(int type)
		857	{
		858	int rot[4], rotlim[2], chng = 0;
		859	double deg[4], deglim[2];
		860
		861	TGNumberEntry *rotEntries[4];
		862	rotEntries[0] = (TGNumberEntry*)rotPos->widgetNE[0];
		863	rotEntries[1] = (TGNumberEntry*)rotPosMin->widgetNE[0];
		864	rotEntries[2] = (TGNumberEntry*)rotPosMax->widgetNE[0];
		865	rotEntries[3] = (TGNumberEntry*)rotPosStep->widgetNE[0];
		866
		867	// Rotation values
		868	if(type == 0)
		869	{
		870	// Check if we had degrees before
		871	if(rotEntries[0]->GetNumStyle() == TGNumberFormat::kNESRealTwo)
		872	chng = 1;
		873
		874	// Change to rotation values
		875	if(chng == 1)
		876	{
		877	for(int i = 0; i < 4; i++)
		878	{
		879	if(rotEntries[i]->GetNumber() == 0.0)
		880	rot[i] = 0;
		881	else
		882	rot[i] = (int)rotEntries[i]->GetNumber()/rotconversion;
		883	}
		884
		885	rotlim[0] = (int)-180/rotconversion;
		886	rotlim[1] = (int)180/rotconversion;
		887
		888	for(int i = 0; i < 4; i++)
		889	{
		890	rotEntries[i]->SetNumStyle(TGNumberFormat::kNESInteger);
		891	rotEntries[i]->SetLimits(TGNumberFormat::kNELLimitMinMax, rotlim[0], rotlim[1]);
		892
		893	rotEntries[i]->SetNumber(rot[i]);
		894	}
		895	}
		896	}
		897	// Degree
		898	else if(type == 1)
		899	{
		900	// Check if we had table position values before
		901	if(rotEntries[0]->GetNumStyle() == TGNumberFormat::kNESInteger)
		902	chng = 1;
		903
		904	// Change to degrees
		905	if(chng == 1)
		906	{
		907	for(int i = 0; i < 4; i++)
		908	{
		909	if(rotEntries[i]->GetNumber() == 0)
		910	deg[i] = 0.;
		911	else
		912	deg[i] = (double)rotEntries[i]->GetNumber()*rotconversion;
		913	}
		914
		915	deglim[0] = -180.;
		916	deglim[1] = 180.;
		917
		918	for(int i = 0; i < 4; i++)
		919	{
		920	rotEntries[i]->SetNumStyle(TGNumberFormat::kNESRealTwo);
		921	rotEntries[i]->SetLimits(TGNumberFormat::kNELLimitMinMax, deglim[0], deglim[1]);
		922
		923	rotEntries[i]->SetNumber(deg[i]);
		924	}
		925	}
		926	}
		927	}
		928
		929	// Enable display canvas to have a live update of histogram
		930	void TGAppMainFrame::EnableLiveUpdate()
		931	{
		932	liveUpdate = liveDisp->widgetChBox[0]->IsDown();
		933	}
		934
		935	// Settings pane connections --------------------------------
		936
		937	// Main measurement window connections ----------------------
		938
		939	// Get the currently selected channel
		940	int TGAppMainFrame::GetChannel()
		941	{
		942	int selectedOutput;
		943	if(vOutCh->widgetCB->GetSelected() < 8) selectedOutput = (vOutCh->widgetCB->GetSelected())+1;
		944	else if( (vOutCh->widgetCB->GetSelected() >= 8) && (vOutCh->widgetCB->GetSelected() < 16) ) selectedOutput = (vOutCh->widgetCB->GetSelected())+93;
		945	else selectedOutput = 1;
		946
		947	return selectedOutput;
		948	}
		949
		950	// Set, get or reset the output voltage
		951	void TGAppMainFrame::VoltOut(int opt)
		952	{
		953	char cmd[256];
		954
		955	// Set the selected voltage
		956	if(opt == 0)
		957	{
		958	int outOn;
		959	float outputVoltage;
		960
		961	outputVoltage = vOut->widgetNE[0]->GetNumber();
		962
		963	if(vOutOpt->widgetChBox[1]->IsOn()) outOn = 1;
		964	else outOn = 0;
		965
		966	fflush(stdout);
		967	sprintf(cmd, "%s/src/mpod/mpod_voltage.sh -o %d -v %f -s %d", rootdir, GetChannel(), outputVoltage, outOn);
		968	#if WORKSTAT == 'I'
		969	retTemp = system(cmd);
		970	#else
		971	printf("Cmd: %s\n",cmd);
		972	#endif
		973	fflush(stdout);
		974	}
		975	// Get current voltage
		976	else if(opt == 1)
		977	{
		978	fflush(stdout);
		979	sprintf(cmd, "%s/src/mpod/mpod_voltage.sh -o %d -g > %s/settings/curvolt.txt", rootdir, GetChannel(), rootdir);
		980	#if WORKSTAT == 'I'
		981	retTemp = system(cmd);
		982	#else
		983	printf("Cmd: %s\n",cmd);
		984	#endif
		985	fflush(stdout);
		986
		987	#if WORKSTAT == 'I'
		988	FILE* fvolt;
		989	double dtemp;
		990	char ctemp[24];
		991	sprintf(cmd, "%s/settings/curvolt.txt", rootdir);
		992	fvolt = fopen(cmd, "r");
		993
		994	if(fvolt != NULL)
		995	{
		996	sprintf(cmd, "WIENER-CRATE-MIB::outputVoltage.u%d = Opaque: Float: %s V\n", GetChannel()-1, "%lf" );
		997	retTemp = fscanf(fvolt, cmd, &dtemp);
		998	vOut->widgetNE[0]->SetNumber(dtemp);
		999	sprintf(cmd, "WIENER-CRATE-MIB::outputSwitch.u%d = INTEGER: %s\n", GetChannel()-1, "%s" );
		1000	retTemp = fscanf(fvolt, cmd, ctemp);
		1001	if( strcmp(ctemp, "On(1)") == 0 )
		1002	vOutOpt->widgetChBox[1]->SetState(kButtonDown);
		1003	else if( strcmp(ctemp, "Off(0)") == 0 )
		1004	vOutOpt->widgetChBox[1]->SetState(kButtonUp);
		1005	}
		1006
		1007	fclose(fvolt);
		1008	#endif
		1009	}
		1010	// Reset output voltage (if stuck in interlock)
		1011	else if(opt == 2)
		1012	{
		1013	vOut->widgetNE[0]->SetNumber(0.000);
		1014	vOutOpt->widgetChBox[1]->SetState(kButtonUp);
		1015
		1016	fflush(stdout);
		1017	sprintf(cmd, "%s/src/mpod/mpod_voltage.sh -r %d", rootdir, GetChannel());
		1018	#if WORKSTAT == 'I'
		1019	retTemp = system(cmd);
		1020	#else
		1021	printf("Cmd: %s\n",cmd);
		1022	#endif
		1023	fflush(stdout);
		1024	}
		1025	}
		1026
		1027	// Set output voltage polarity to negative
		1028	void TGAppMainFrame::NegativePolarity()
		1029	{
		1030	double newHardlimit;
		1031	int polar = 0; // 0 = positive, 1 = negative
		1032
		1033	if(vOutOpt->widgetChBox[0]->IsOn())
		1034	polar = 1;
		1035	else
		1036	polar = 0;
		1037
		1038	// Set hard limit to the negative version of what it was before
		1039	if( (vHardlimit->widgetNE[0]->GetNumber() > 0.) && (polar == 1) )
		1040	newHardlimit = -(vHardlimit->widgetNE[0]->GetNumber());
		1041	else if( (vHardlimit->widgetNE[0]->GetNumber() < 0.) && (polar == 0) )
		1042	newHardlimit = -(vHardlimit->widgetNE[0]->GetNumber());
		1043	else if(vHardlimit->widgetNE[0]->GetNumber() == 0.)
		1044	newHardlimit = 0.;
		1045	else
		1046	newHardlimit = vHardlimit->widgetNE[0]->GetNumber();
		1047
		1048	// Apropriately set the limit to the output voltage number entry
		1049	vHardlimit->widgetNE[0]->SetNumber(newHardlimit);
		1050
		1051	if(polar == 1)
		1052	vOut->widgetNE[0]->SetLimits(TGNumberFormat::kNELLimitMinMax, newHardlimit, 0.);
		1053	else if(polar == 0)
		1054	vOut->widgetNE[0]->SetLimits(TGNumberFormat::kNELLimitMinMax, 0., newHardlimit);
		1055	}
		1056
		1057	// Set, get, home or reset the table position
		1058	void TGAppMainFrame::PositionSet(int opt)
		1059	{
		1060	char cmd[1024];
		1061
		1062	// Set the selected table position
		1063	if(opt == 0)
		1064	{
		1065	int positX, positY, positZ;
		1066
		1067	if(posUnits->widgetCB->GetSelected() == 0)
		1068	{
		1069	positX = xPos->widgetNE[0]->GetNumber();
		1070	positY = yPos->widgetNE[0]->GetNumber();
		1071	positZ = zPos->widgetNE[0]->GetNumber();
		1072	}
		1073	else if(posUnits->widgetCB->GetSelected() == 1)
		1074	{
		1075	positX = (int)xPos->widgetNE[0]->GetNumber()/lenconversion;
		1076	positY = (int)yPos->widgetNE[0]->GetNumber()/lenconversion;
		1077	positZ = (int)zPos->widgetNE[0]->GetNumber()/lenconversion;
		1078	}
		1079
		1080	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 1 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 1 -c m", rootdir, positX, rootdir);
		1081	#if WORKSTAT == 'I'
		1082	retTemp = system(cmd);
		1083	#else
		1084	printf("Cmd: %s\n",cmd);
		1085	#endif
		1086
		1087	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 2 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 2 -c m", rootdir, positY, rootdir);
		1088	#if WORKSTAT == 'I'
		1089	retTemp = system(cmd);
		1090	#else
		1091	printf("Cmd: %s\n",cmd);
		1092	#endif
		1093
		1094	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 3 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 3 -c m", rootdir, positZ, rootdir);
		1095	#if WORKSTAT == 'I'
		1096	retTemp = system(cmd);
		1097	#else
		1098	printf("Cmd: %s\n",cmd);
		1099	#endif
		1100	}
		1101	// Get current table position
		1102	else if(opt == 1)
		1103	{
		1104	fflush(stdout);
		1105
		1106	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 1 -p > %s/settings/curpos.txt", rootdir, rootdir); // X-axis
		1107	fflush(stdout);
		1108	#if WORKSTAT == 'I'
		1109	retTemp = system(cmd);
		1110	#else
		1111	printf("Cmd: %s\n",cmd);
		1112	#endif
		1113
		1114	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 2 -p >> %s/settings/curpos.txt", rootdir, rootdir); // Y-axis
		1115	fflush(stdout);
		1116	#if WORKSTAT == 'I'
		1117	retTemp = system(cmd);
		1118	#else
		1119	printf("Cmd: %s\n",cmd);
		1120	#endif
		1121
		1122	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 3 -p >> %s/settings/curpos.txt", rootdir, rootdir); // Z-axis
		1123	fflush(stdout);
		1124	#if WORKSTAT == 'I'
		1125	retTemp = system(cmd);
		1126	#else
		1127	printf("Cmd: %s\n",cmd);
		1128	#endif
		1129
		1130	#if WORKSTAT == 'I'
		1131	FILE* fpos;
		1132	int itemp;
		1133	sprintf(cmd, "%s/settings/curpos.txt", rootdir);
		1134	fpos = fopen(cmd, "r");
		1135
		1136	if(fpos != NULL)
		1137	{
		1138	if(posUnits->widgetCB->GetSelected() == 0)
		1139	{
		1140	retTemp = fscanf(fpos, "%d\n", &itemp);
		1141	xPos->widgetNE[0]->SetNumber(itemp);
		1142	retTemp = fscanf(fpos, "%d\n", &itemp);
		1143	yPos->widgetNE[0]->SetNumber(itemp);
		1144	retTemp = fscanf(fpos, "%d\n", &itemp);
		1145	zPos->widgetNE[0]->SetNumber(itemp);
		1146	}
		1147	else if(posUnits->widgetCB->GetSelected() == 1)
		1148	{
		1149	retTemp = fscanf(fpos, "%d\n", &itemp);
		1150	xPos->widgetNE[0]->SetNumber((double)itemp*lenconversion);
		1151	retTemp = fscanf(fpos, "%d\n", &itemp);
		1152	yPos->widgetNE[0]->SetNumber((double)itemp*lenconversion);
		1153	retTemp = fscanf(fpos, "%d\n", &itemp);
		1154	zPos->widgetNE[0]->SetNumber((double)itemp*lenconversion);
		1155	}
		1156	}
		1157
		1158	fclose(fpos);
		1159	#endif
		1160	}
		1161	// Home the table position
		1162	else if(opt == 2)
		1163	{
		1164	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 1 -h", rootdir); // X-axis
		1165	#if WORKSTAT == 'I'
		1166	retTemp = system(cmd);
		1167	#else
		1168	printf("Cmd: %s\n",cmd);
		1169	#endif
		1170
		1171	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 2 -h", rootdir); // Y-axis
		1172	#if WORKSTAT == 'I'
		1173	retTemp = system(cmd);
		1174	#else
		1175	printf("Cmd: %s\n",cmd);
		1176	#endif
		1177
		1178	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 3 -h", rootdir); // Z-axis
		1179	#if WORKSTAT == 'I'
		1180	retTemp = system(cmd);
		1181	#else
		1182	printf("Cmd: %s\n",cmd);
		1183	#endif
		1184	PositionSet(1);
		1185	}
		1186	// Reset the table position
		1187	else if(opt == 3)
		1188	{
		1189	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 1 -r && sudo %s/src/MIKRO/mikro_ctrl -n 1 -i 3 && sudo %s/src/MIKRO/mikro_ctrl -n 1 -h", rootdir, rootdir, rootdir); // X-axis
		1190	#if WORKSTAT == 'I'
		1191	printf("Positioning table reset, initialization and homing in progress. Please wait...\n");
		1192	retTemp = system(cmd);
		1193	#else
		1194	printf("Cmd: %s\n",cmd);
		1195	#endif
		1196
		1197	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 2 -r && sudo %s/src/MIKRO/mikro_ctrl -n 2 -i 3 && sudo %s/src/MIKRO/mikro_ctrl -n 2 -h", rootdir, rootdir, rootdir); // Y-axis
		1198	#if WORKSTAT == 'I'
		1199	retTemp = system(cmd);
		1200	#else
		1201	printf("Cmd: %s\n",cmd);
		1202	#endif
		1203
		1204	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 3 -r && sudo %s/src/MIKRO/mikro_ctrl -n 3 -i 3 && sudo %s/src/MIKRO/mikro_ctrl -n 3 -h", rootdir, rootdir, rootdir); // Z-axis
		1205	#if WORKSTAT == 'I'
		1206	retTemp = system(cmd);
		1207	printf("Positioning table reset, initialization and homing complete.\n");
		1208	#else
		1209	printf("Cmd: %s\n",cmd);
		1210	#endif
		1211	PositionSet(1);
		1212	}
		1213	}
		1214
		1215	// Set, get, home or reset the rotation platform
		1216	void TGAppMainFrame::RotationSet(int opt)
		1217	{
		1218	char cmd[1024];
		1219
		1220	// Set the selected rotation
		1221	if(opt == 0)
		1222	{
		1223	int positAlpha;
		1224
		1225	if(rotUnits->widgetCB->GetSelected() == 0)
		1226	positAlpha = rotPos->widgetNE[0]->GetNumber();
		1227	else if(rotUnits->widgetCB->GetSelected() == 1)
		1228	positAlpha = rotPos->widgetNE[0]->GetNumber()/rotconversion;
		1229
		1230	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 4 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 4 -c m", rootdir, positAlpha, rootdir);
		1231	#if WORKSTAT == 'I'
		1232	retTemp = system(cmd);
		1233	#else
		1234	printf("Cmd: %s\n",cmd);
		1235	#endif
		1236	}
		1237	// Get current rotation
		1238	else if(opt == 1)
		1239	{
		1240	fflush(stdout);
		1241
		1242	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 4 -p > %s/settings/currot.txt", rootdir, rootdir);
		1243	fflush(stdout);
		1244	#if WORKSTAT == 'I'
		1245	retTemp = system(cmd);
		1246	#else
		1247	printf("Cmd: %s\n",cmd);
		1248	#endif
		1249
		1250	#if WORKSTAT == 'I'
		1251	FILE* frot;
		1252	int itemp;
		1253	sprintf(cmd, "%s/settings/currot.txt", rootdir);
		1254	frot = fopen(cmd, "r");
		1255
		1256	if(frot != NULL)
		1257	{
		1258	retTemp = fscanf(frot, "%d\n", &itemp);
		1259	if(rotUnits->widgetCB->GetSelected() == 0)
		1260	rotPos->widgetNE[0]->SetNumber(itemp);
		1261	else if(rotUnits->widgetCB->GetSelected() == 1)
		1262	rotPos->widgetNE[0]->SetNumber((double)itemp*rotconversion);
		1263	}
		1264
		1265	fclose(frot);
		1266	#endif
		1267	}
		1268	// Home the rotation
		1269	else if(opt == 2)
		1270	{
		1271	// TODO: For now only set back to 0, not home!
		1272	// sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 4 -h", rootdir);
		1273	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 4 -v 0 -s la && %s/src/MIKRO/mikro_ctrl -n 4 -c m", rootdir, rootdir);
		1274	#if WORKSTAT == 'I'
		1275	retTemp = system(cmd);
		1276	#else
		1277	printf("Cmd: %s\n",cmd);
		1278	#endif
		1279	RotationSet(1);
		1280	}
		1281	// Reset the rotation
		1282	else if(opt == 3)
		1283	{
		1284	// TODO: For now only set back to 0, not home!
		1285	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 4 -r && sudo %s/src/MIKRO/mikro_ctrl -n 4 -i 2 && sudo %s/src/MIKRO/mikro_ctrl -n 4 -h", rootdir, rootdir, rootdir);
		1286	#if WORKSTAT == 'I'
		1287	printf("Rotation platform reset, initalization and homing in progress. Please wait...\n");
		1288	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 4 -v 0 -s la && %s/src/MIKRO/mikro_ctrl -n 4 -c m", rootdir, rootdir);
		1289	retTemp = system(cmd);
		1290	sleep(15); // wait for the motor to change position from wherever to 0
		1291	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 4 -r && sudo %s/src/MIKRO/mikro_ctrl -n 4 -i 2", rootdir, rootdir);
		1292	retTemp = system(cmd);
		1293	printf("Rotation platform reset, initalization and homing complete.\n");
		1294	#else
		1295	printf("Cmd: %s\n",cmd);
		1296	#endif
		1297	RotationSet(1);
		1298	}
		1299	}
		1300
		1301	// File browser for selecting the save file
		1302	void TGAppMainFrame::SaveFile()
		1303	{
		1304	TGFileInfo file_info;
		1305	const char *filetypes[] = {"Histograms",histextall,0,0};
		1306	char *cTemp;
		1307	file_info.fFileTypes = filetypes;
		1308	cTemp = new char[1024];
		1309	sprintf(cTemp, "%s/results", rootdir);
		1310	file_info.fIniDir = StrDup(cTemp);
		1311	new TGFileDialog(gClient->GetDefaultRoot(), fMain, kFDSave, &file_info);
		1312	delete[] cTemp;
		1313
		1314	if(file_info.fFilename != NULL)
		1315	fileName->widgetTE->SetText(file_info.fFilename);
		1316	}
		1317
		1318	// Start the acquisition
		1319	void TGAppMainFrame::StartAcq()
		1320	{
		1321	// Variable that will initialize camac only once (for scans)
		1322	int scanon = 0;
		1323
		1324	// Determine the type of measurement to perform
		1325	int vscan = 0, pscan = 0, zscan = 0, ascan = 0;
		1326	if(scansOn->widgetChBox[0]->IsDown()) vscan = 1;
		1327	if(scansOn->widgetChBox[1]->IsDown()) pscan = 1;
		1328	if(scansOn->widgetChBox[2]->IsDown()) zscan = 1;
		1329	if(scansOn->widgetChBox[3]->IsDown()) ascan = 1;
		1330
		1331	char cmd[256];
		1332	int i, j, k;
		1333	float progVal;
		1334	FILE *pfin;
		1335
		1336	// Variables for voltage scan
		1337	float currentVoltage, minVoltage, maxVoltage, stepVoltage;
		1338	int repetition;
		1339
		1340	// Variables for surface scan and Z axis scan
		1341	float minXpos, maxXpos, stepXpos;
		1342	float minYpos, maxYpos, stepYpos;
		1343	float minZpos, maxZpos, stepZpos;
		1344	int repetX, repetY, repetZ;
		1345
		1346	// Variables for angle scan
		1347	float currentAlpha, minAlpha, maxAlpha, stepAlpha;
		1348	int repetAlpha;
		1349
		1350	// Only voltage scan
		1351	if( (vscan == 1) && (pscan == 0) && (ascan == 0) )
		1352	{ // TODO - include possibility to make voltage and angle scan at same time
		1353	// If already started, stop the acquisition
		1354	if(acqStarted)
		1355	{
		1356	printf("Stopping current voltage scan...\n");
		1357	gROOT->SetInterrupt();
		1358	measProgress->widgetTB[0]->SetText("Start acquisition");
		1359	acqStarted = false;
		1360
		1361	// Write information to the finish_sig.txt value
		1362	sprintf(cmd, "%s/dbg/finish_sig.txt", rootdir);
		1363	pfin = fopen(cmd,"w");
		1364	fprintf(pfin, "%s: Voltage scan stopped.", timeStamp->widgetTE->GetText());
		1365	fclose(pfin);
		1366	}
		1367	// If stopped, start the acquisition
		1368	else if(!acqStarted)
		1369	{
		1370	printf("Running a voltage scan...\n");
		1371
		1372	// Check the steps
		1373	minVoltage = vOutStart->widgetNE[0]->GetNumber();
		1374	maxVoltage = vOutStop->widgetNE[0]->GetNumber();
		1375	stepVoltage = vOutStep->widgetNE[0]->GetNumber();
		1376
		1377	if(stepVoltage == 0.)
		1378	repetition = 1;
		1379	else
		1380	{
		1381	// Example: min = 40, max = 70, step = 5 (in increasing steps)
		1382	if( (maxVoltage > minVoltage) && (stepVoltage > 0) )
		1383	repetition = ((maxVoltage - minVoltage)/stepVoltage)+1;
		1384	// Example: min = 70, max = 40, step = -5 (in decreasing steps)
		1385	else if( (maxVoltage < minVoltage) && (stepVoltage < 0) )
		1386	repetition = ((minVoltage - maxVoltage)/stepVoltage)-1;
		1387	// Example: min = 70, max = 70 (no scan)
		1388	else if( maxVoltage == minVoltage )
		1389	repetition = 1;
		1390	// If step is not correctly set, stop the acqusition
		1391	else
		1392	{
		1393	// TODO
		1394	printf("Stopping current voltage scan...\n");
		1395	gROOT->SetInterrupt();
		1396	measProgress->widgetTB[0]->SetText("Start acquisition");
		1397	acqStarted = false;
		1398	repetition = 0;
		1399	}
		1400	}
		1401
		1402	if(DBGSIG) printf("StartAcq(): Voltage repetition (%lf,%lf,%lf) = %d\n", minVoltage, maxVoltage, stepVoltage, repetition);
		1403
		1404	i = 0;
		1405
		1406	// TODO - Setting button text and acqStarted do not work!
		1407	measProgress->widgetTB[0]->SetText("Stop acquisition");
		1408	acqStarted = true;
		1409	progVal = 0.00;
		1410	measProgress->widgetPB->SetPosition(progVal);
		1411	gVirtualX->Update(1);
		1412
		1413	clkt0 = clock();
		1414	timet0 = time(NULL);
		1415
		1416	while(1)
		1417	{
		1418	if( (repetition > 0) && (i == repetition) ) break;
		1419	else if( (repetition < 0) && (i == -repetition) ) break;
		1420	else if( repetition == 0 ) break;
		1421
		1422	progVal = (float)(100.00/abs(repetition))*i;
		1423	measProgress->widgetPB->SetPosition(progVal);
		1424
		1425	TimeEstimate(clkt0, timet0, progVal, cmd, singlewait*abs(repetition));
		1426	measProgress->widgetTE->SetText(cmd);
		1427
		1428	gVirtualX->Update(1);
		1429
		1430	fflush(stdout);
		1431	currentVoltage = minVoltage + stepVoltage*i;
		1432	sprintf(cmd, "%s/src/mpod/mpod_voltage.sh -o %d -v %f -s 1", rootdir, GetChannel(), currentVoltage);
		1433	#if WORKSTAT == 'I'
		1434	retTemp = system(cmd);
		1435	#else
		1436	printf("Cmd: %s\n",cmd);
		1437	#endif
		1438	fflush(stdout);
		1439
		1440	printf("Waiting for voltage change...\n");
		1441	sleep(singlewait);
		1442	vOut->widgetNE[0]->SetNumber(currentVoltage);
		1443	gVirtualX->Update(1);
		1444	printf("Continuing...\n");
		1445
		1446	// Here comes function to start histogramming <<<<<<<<<<<<<<<<<<<<<<<<
		1447	RunMeas((void*)0, i, scanon); // TODO
		1448	fflush(stdout);
		1449
		1450	i++;
		1451	}
		1452
		1453	// Set output back to off
		1454	fflush(stdout);
		1455	printf("Measurement finished, returning to starting voltage...\n");
		1456	sprintf(cmd, "%s/src/mpod/mpod_voltage.sh -o %d -v %f -s 1", rootdir, GetChannel(), minVoltage);
		1457	vOut->widgetNE[0]->SetNumber(minVoltage);
		1458	#if WORKSTAT == 'I'
		1459	retTemp = system(cmd);
		1460	#else
		1461	printf("Cmd: %s\n",cmd);
		1462	#endif
		1463	fflush(stdout);
		1464
		1465	progVal = 100.00;
		1466	measProgress->widgetPB->SetPosition(progVal);
		1467	printf("\n");
		1468
		1469	sprintf(cmd, "%s/dbg/finish_sig.txt", rootdir);
		1470	pfin = fopen(cmd,"w");
		1471	fprintf(pfin, "%s: Voltage scan finished.", timeStamp->widgetTE->GetText());
		1472	fclose(pfin);
		1473
		1474	measProgress->widgetTB[0]->SetText("Start acquisition");
		1475	acqStarted = false;
		1476	}
		1477	}
		1478	// Surface scan
		1479	else if( (pscan == 1) && (vscan == 0) && (ascan == 0) )
		1480	{
		1481	// If already started, stop the acquisition
		1482	if(acqStarted)
		1483	{
		1484	printf("Stopping current surface scan...\n");
		1485	gROOT->SetInterrupt();
		1486	measProgress->widgetTB[0]->SetText("Start acquisition");
		1487	acqStarted = false;
		1488
		1489	// Write information to the finish_sig.txt value
		1490	sprintf(cmd, "%s/dbg/finish_sig.txt", rootdir);
		1491	pfin = fopen(cmd,"w");
		1492	fprintf(pfin, "%s: Surface scan stopped.", timeStamp->widgetTE->GetText());
		1493	fclose(pfin);
		1494	}
		1495	// If stopped, start the acquisition
		1496	else if(!acqStarted)
		1497	{
		1498	printf("Running a surface scan...\n");
		1499
		1500	minXpos = xPosMin->widgetNE[0]->GetNumber();
		1501	maxXpos = xPosMax->widgetNE[0]->GetNumber();
		1502	stepXpos = xPosStep->widgetNE[0]->GetNumber();
		1503	minYpos = yPosMin->widgetNE[0]->GetNumber();
		1504	maxYpos = yPosMax->widgetNE[0]->GetNumber();
		1505	stepYpos = yPosStep->widgetNE[0]->GetNumber();
		1506	minZpos = zPosMin->widgetNE[0]->GetNumber();
		1507	maxZpos = zPosMax->widgetNE[0]->GetNumber();
		1508	stepZpos = zPosStep->widgetNE[0]->GetNumber();
		1509
		1510	// Setting repetition for Z axis scan
		1511	if(zscan == 1)
		1512	{
		1513	if(stepZpos == 0.)
		1514	repetZ = 1;
		1515	else
		1516	{
		1517	// Example: min = 40, max = 70, step = 5 (in increasing steps)
		1518	if( (maxZpos > minZpos) && (stepZpos > 0) )
		1519	repetZ = ((maxZpos - minZpos)/stepZpos)+1;
		1520	// Example: min = 70, max = 40, step = -5 (in decreasing steps)
		1521	else if( (maxZpos < minZpos) && (stepZpos < 0) )
		1522	repetZ = ((minZpos - maxZpos)/stepZpos)-1;
		1523	// Example: min = 70, max = 70 (no scan)
		1524	else if( maxZpos == minZpos )
		1525	repetZ = 1;
		1526	// If step is not correctly set, stop the acqusition
		1527	else
		1528	{
		1529	// TODO
		1530	printf("Stopping current surface scan (Z step error)...\n");
		1531	gROOT->SetInterrupt();
		1532	measProgress->widgetTB[0]->SetText("Start acquisition");
		1533	acqStarted = false;
		1534	repetZ = 0;
		1535	}
		1536	}
		1537	}
		1538	else
		1539	{
		1540	minZpos = zPos->widgetNE[0]->GetNumber();
		1541	repetZ = 1;
		1542	}
		1543
		1544	// Setting repetition for X axis
		1545	if(stepXpos == 0.)
		1546	repetX = 1;
		1547	else
		1548	{
		1549	// Example: min = 40, max = 70, step = 5 (in increasing steps)
		1550	if( (maxXpos > minXpos) && (stepXpos > 0) )
		1551	repetX = ((maxXpos - minXpos)/stepXpos)+1;
		1552	// Example: min = 70, max = 40, step = -5 (in decreasing steps)
		1553	else if( (maxXpos < minXpos) && (stepXpos < 0) )
		1554	repetX = ((minXpos - maxXpos)/stepXpos)-1;
		1555	// Example: min = 70, max = 70 (no scan)
		1556	else if( maxXpos == minXpos )
		1557	repetX = 1;
		1558	// If step is not correctly set, stop the acqusition
		1559	else
		1560	{
		1561	// TODO
		1562	printf("Stopping current surface scan (X step error)...\n");
		1563	gROOT->SetInterrupt();
		1564	measProgress->widgetTB[0]->SetText("Start acquisition");
		1565	acqStarted = false;
		1566	repetX = 0;
		1567	}
		1568	}
		1569	// Setting repetition for Y axis
		1570	if(stepYpos == 0.)
		1571	repetY = 1;
		1572	else
		1573	{
		1574	// Example: min = 40, max = 70, step = 5 (in increasing steps)
		1575	if( (maxYpos > minYpos) && (stepYpos > 0) )
		1576	repetY = ((maxYpos - minYpos)/stepYpos)+1;
		1577	// Example: min = 70, max = 40, step = -5 (in decreasing steps)
		1578	else if( (maxYpos < minYpos) && (stepYpos < 0) )
		1579	repetY = ((minYpos - maxYpos)/stepYpos)-1;
		1580	// Example: min = 70, max = 70 (no scan)
		1581	else if( maxYpos == minYpos )
		1582	repetY = 1;
		1583	// If step is not correctly set, stop the acqusition
		1584	else
		1585	{
		1586	// TODO
		1587	printf("Stopping current surface scan (Y step error)...\n");
		1588	gROOT->SetInterrupt();
		1589	measProgress->widgetTB[0]->SetText("Start acquisition");
		1590	acqStarted = false;
		1591	repetY = 0;
		1592	}
		1593	}
		1594
		1595	if(DBGSIG) printf("StartAcq(): X axis repetition (%lf,%lf,%lf) = %d\n", minXpos, maxXpos, stepXpos, repetX);
		1596	if(DBGSIG) printf("StartAcq(): Y axis repetition (%lf,%lf,%lf) = %d\n", minYpos, maxYpos, stepYpos, repetY);
		1597	if(DBGSIG) printf("StartAcq(): Z axis repetition (%lf,%lf,%lf) = %d\n", minZpos, maxZpos, stepZpos, repetZ);
		1598
		1599	i = 0; j = 0; k = 0;
		1600
		1601	// TODO - Setting button text and acqStarted do not work!
		1602	measProgress->widgetTB[0]->SetText("Stop acquisition");
		1603	acqStarted = true;
		1604	progVal = 0.00;
		1605	measProgress->widgetPB->SetPosition(progVal);
		1606	gVirtualX->Update(1);
		1607
		1608	clkt0 = clock();
		1609	timet0 = time(NULL);
		1610
		1611	// Scan over Z axis
		1612	while(1)
		1613	{
		1614	if( (repetZ > 0) && (k == repetZ) ) break;
		1615	else if( (repetZ < 0) && (k == -repetZ) ) break;
		1616	else if( repetZ == 0 ) break;
		1617
		1618	fflush(stdout);
		1619	// Z-axis change
		1620	if( posUnits->widgetCB->GetSelected() == 0)
		1621	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 3 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 3 -c m", rootdir, (int)(minZpos + stepZpos*k), rootdir);
		1622	else if( posUnits->widgetCB->GetSelected() == 1)
		1623	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 3 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 3 -c m", rootdir, (int)((minZpos + stepZpos*k)/lenconversion), rootdir);
		1624	#if WORKSTAT == 'I'
		1625	retTemp = system(cmd);
		1626	#else
		1627	printf("Cmd: %s\n",cmd);
		1628	#endif
		1629	fflush(stdout);
		1630
		1631	printf("Next Z position...\n");
		1632	sleep(2*doublewait);
		1633	zPos->widgetNE[0]->SetNumber(minZpos + stepZpos*k);
		1634	fflush(stdout);
		1635
		1636	// Scan over Y axis
		1637	while(1)
		1638	{
		1639	if( (repetY > 0) && (j == repetY) ) break;
		1640	else if( (repetY < 0) && (j == -repetY) ) break;
		1641	else if( repetY == 0 ) break;
		1642
		1643	fflush(stdout);
		1644	// Y-axis change
		1645	if( posUnits->widgetCB->GetSelected() == 0)
		1646	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 2 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 2 -c m", rootdir, (int)(minYpos + stepYpos*j), rootdir);
		1647	else if( posUnits->widgetCB->GetSelected() == 1)
		1648	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 2 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 2 -c m", rootdir, (int)((minYpos + stepYpos*j)/lenconversion), rootdir);
		1649	#if WORKSTAT == 'I'
		1650	retTemp = system(cmd);
		1651	#else
		1652	printf("Cmd: %s\n",cmd);
		1653	#endif
		1654	fflush(stdout);
		1655
		1656	printf("Next Y position...\n");
		1657	sleep(2*doublewait);
		1658	yPos->widgetNE[0]->SetNumber(minYpos + stepYpos*j);
		1659	fflush(stdout);
		1660
		1661	// Scan over X axis
		1662	while(1)
		1663	{
		1664	if( (repetX > 0) && (i == repetX) ) break;
		1665	else if( (repetX < 0) && (i == -repetX) ) break;
		1666	else if( repetX == 0 ) break;
		1667
		1668	progVal = (float)(100.00/(abs(repetX)abs(repetY)abs(repetZ)))(kabs(repetX)abs(repetY) + jabs(repetX) + i);
		1669	measProgress->widgetPB->SetPosition(progVal);
		1670
		1671	TimeEstimate(clkt0, timet0, progVal, cmd, doublewait((abs(repetX)+2)abs(repetY)+2)*abs(repetZ));
		1672	measProgress->widgetTE->SetText(cmd);
		1673
		1674	gVirtualX->Update(1);
		1675
		1676	// X-axis change
		1677	if( posUnits->widgetCB->GetSelected() == 0)
		1678	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 1 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 1 -c m", rootdir, (int)(minXpos + stepXpos*i), rootdir);
		1679	else if( posUnits->widgetCB->GetSelected() == 1)
		1680	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 1 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 1 -c m", rootdir, (int)((minXpos + stepXpos*i)/lenconversion), rootdir);
		1681	#if WORKSTAT == 'I'
		1682	retTemp = system(cmd);
		1683	#else
		1684	printf("Cmd: %s\n",cmd);
		1685	#endif
		1686	fflush(stdout);
		1687
		1688	printf("Next X position...\n");
		1689	fflush(stdout);
		1690
		1691	printf("Waiting for position change...\n");
		1692	sleep(doublewait);
		1693	xPos->widgetNE[0]->SetNumber(minXpos + stepXpos*i);
		1694	printf("Continuing...\n");
		1695
		1696	// Here comes function to start histogramming <<<<<<<<<<<<<<<<<<<<<<<<
		1697	RunMeas((void)0, (jrepetX + i), scanon);
		1698
		1699	fflush(stdout);
		1700
		1701	i++;
		1702	}
		1703
		1704	i = 0;
		1705	printf("\n");
		1706
		1707	j++;
		1708	}
		1709
		1710	j = 0;
		1711
		1712	k++;
		1713	}
		1714	printf("Time = %d\n", (int)time(NULL));
		1715
		1716	fflush(stdout);
		1717	printf("Measurement finished, returning to starting position...\n");
		1718	// X-axis return
		1719	if( posUnits->widgetCB->GetSelected() == 0)
		1720	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 1 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 1 -c m", rootdir, (int)minXpos, rootdir);
		1721	else if( posUnits->widgetCB->GetSelected() == 1)
		1722	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 1 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 1 -c m", rootdir, (int)(minXpos/lenconversion), rootdir);
		1723	#if WORKSTAT == 'I'
		1724	retTemp = system(cmd);
		1725	#else
		1726	printf("Cmd: %s\n",cmd);
		1727	#endif
		1728	fflush(stdout);
		1729
		1730	// Y-axis return
		1731	if( posUnits->widgetCB->GetSelected() == 0)
		1732	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 2 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 2 -c m", rootdir, (int)minYpos, rootdir);
		1733	else if( posUnits->widgetCB->GetSelected() == 1)
		1734	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 2 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 2 -c m", rootdir, (int)(minYpos/lenconversion), rootdir);
		1735	#if WORKSTAT == 'I'
		1736	retTemp = system(cmd);
		1737	#else
		1738	printf("Cmd: %s\n",cmd);
		1739	#endif
		1740
		1741	// Z-axis return
		1742	if( posUnits->widgetCB->GetSelected() == 0)
		1743	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 3 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 3 -c m", rootdir, (int)minZpos, rootdir);
		1744	else if( posUnits->widgetCB->GetSelected() == 1)
		1745	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 3 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 3 -c m", rootdir, (int)(minZpos/lenconversion), rootdir);
		1746	#if WORKSTAT == 'I'
		1747	retTemp = system(cmd);
		1748	#else
		1749	printf("Cmd: %s\n",cmd);
		1750	#endif
		1751	xPos->widgetNE[0]->SetNumber(minXpos);
		1752	yPos->widgetNE[0]->SetNumber(minYpos);
		1753	zPos->widgetNE[0]->SetNumber(minZpos);
		1754
		1755	progVal = 100.00;
		1756	measProgress->widgetPB->SetPosition(progVal);
		1757	printf("\n");
		1758
		1759	// Write information to the finish_sig.txt value
		1760	sprintf(cmd, "%s/dbg/finish_sig.txt", rootdir);
		1761	pfin = fopen(cmd,"w");
		1762	fprintf(pfin, "%s: Surface scan finished.", timeStamp->widgetTE->GetText());
		1763	fclose(pfin);
		1764
		1765	measProgress->widgetTB[0]->SetText("Start acquisition");
		1766	acqStarted = false;
		1767	}
		1768	}
		1769	// Only angle scan
		1770	if( (ascan == 1) && (pscan == 0) && (vscan == 0) )
		1771	{
		1772	// If already started, stop the acquisition
		1773	if(acqStarted)
		1774	{
		1775	printf("Stopping current angle scan...\n");
		1776	gROOT->SetInterrupt();
		1777	measProgress->widgetTB[0]->SetText("Start acquisition");
		1778	acqStarted = false;
		1779
		1780	// Write information to the finish_sig.txt value
		1781	sprintf(cmd, "%s/dbg/finish_sig.txt", rootdir);
		1782	pfin = fopen(cmd,"w");
		1783	fprintf(pfin, "%s: Angle scan stopped.", timeStamp->widgetTE->GetText());
		1784	fclose(pfin);
		1785	}
		1786	// If stopped, start the acquisition
		1787	else if(!acqStarted)
		1788	{
		1789	printf("Running an incidence angle scan...\n");
		1790
		1791	// Check the steps
		1792	minAlpha = rotPosMin->widgetNE[0]->GetNumber();
		1793	maxAlpha = rotPosMax->widgetNE[0]->GetNumber();
		1794	stepAlpha = rotPosStep->widgetNE[0]->GetNumber();
		1795
		1796	if(stepAlpha == 0.)
		1797	repetAlpha = 1;
		1798	else
		1799	{
		1800	// Example: min = 40, max = 70, step = 5 (in increasing steps)
		1801	if( (maxAlpha > minAlpha) && (stepAlpha > 0) )
		1802	repetAlpha = ((maxAlpha - minAlpha)/stepAlpha)+1;
		1803	// Example: min = 70, max = 40, step = -5 (in decreasing steps)
		1804	else if( (maxAlpha < minAlpha) && (stepAlpha < 0) )
		1805	repetAlpha = ((minAlpha - maxAlpha)/stepAlpha)-1;
		1806	// Example: min = 70, max = 70 (no scan)
		1807	else if( maxAlpha == minAlpha )
		1808	repetAlpha = 1;
		1809	// If step is not correctly set, stop the acqusition
		1810	else
		1811	{
		1812	// TODO
		1813	printf("Stopping current incidence angle scan...\n");
		1814	gROOT->SetInterrupt();
		1815	measProgress->widgetTB[0]->SetText("Start acquisition");
		1816	acqStarted = false;
		1817	repetAlpha = 0;
		1818	}
		1819	}
		1820
		1821	if(DBGSIG) printf("StartAcq(): Angle repetition (%lf,%lf,%lf) = %d\n", minAlpha, maxAlpha, stepAlpha, repetAlpha);
		1822
		1823	int angleWait = TMath::Ceil(abs(rotPos->widgetNE[0]->GetNumber()-minAlpha)*15/(rotPos->widgetNE[0]->GetNumMax()));
		1824	if(rotUnits->widgetCB->GetSelected() == 1)
		1825	{
		1826	minAlpha = minAlpha/rotconversion;
		1827	maxAlpha = maxAlpha/rotconversion;
		1828	stepAlpha = stepAlpha/rotconversion;
		1829	}
		1830
		1831	i = 0;
		1832
		1833	// TODO - Setting button text and acqStarted do not work!
		1834	measProgress->widgetTB[0]->SetText("Stop acquisition");
		1835	acqStarted = true;
		1836	progVal = 0.00;
		1837	measProgress->widgetPB->SetPosition(progVal);
		1838	gVirtualX->Update(1);
		1839
		1840	clkt0 = clock();
		1841	timet0 = time(NULL);
		1842
		1843	// Setting angle to initial position
		1844	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 4 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 4 -c m", rootdir, (int)minAlpha, rootdir);
		1845	if(rotUnits->widgetCB->GetSelected() == 0)
		1846	rotPos->widgetNE[0]->SetNumber(minAlpha);
		1847	else if(rotUnits->widgetCB->GetSelected() == 1)
		1848	rotPos->widgetNE[0]->SetNumber(minAlpha*rotconversion);
		1849	#if WORKSTAT == 'I'
		1850	retTemp = system(cmd);
		1851	#else
		1852	printf("Cmd: %s\n",cmd);
		1853	#endif
		1854	fflush(stdout);
		1855
		1856	printf("Waiting for %ds for rotation platform to move into starting position...\n", angleWait);
		1857	sleep(angleWait);
		1858
		1859	while(1)
		1860	{
		1861	if( (repetAlpha > 0) && (i == repetAlpha) ) break;
		1862	else if( (repetAlpha < 0) && (i == -repetAlpha) ) break;
		1863	else if( repetAlpha == 0 ) break;
		1864
		1865	progVal = (float)(100.00/abs(repetAlpha))*i;
		1866	measProgress->widgetPB->SetPosition(progVal);
		1867
		1868	TimeEstimate(clkt0, timet0, progVal, cmd, singlewait*abs(repetAlpha));
		1869	measProgress->widgetTE->SetText(cmd);
		1870
		1871	gVirtualX->Update(1);
		1872
		1873	fflush(stdout);
		1874	currentAlpha = minAlpha + stepAlpha*i;
		1875	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 4 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 4 -c m", rootdir, (int)currentAlpha, rootdir);
		1876	#if WORKSTAT == 'I'
		1877	retTemp = system(cmd);
		1878	#else
		1879	printf("Cmd: %s\n",cmd);
		1880	#endif
		1881	fflush(stdout);
		1882
		1883	printf("Waiting for angle change...\n");
		1884	sleep(singlewait);
		1885	if(rotUnits->widgetCB->GetSelected() == 0)
		1886	rotPos->widgetNE[0]->SetNumber(currentAlpha);
		1887	else if(rotUnits->widgetCB->GetSelected() == 1)
		1888	rotPos->widgetNE[0]->SetNumber(currentAlpha*rotconversion);
		1889	gVirtualX->Update(1);
		1890	printf("Continuing...\n");
		1891
		1892	// Here comes function to start histogramming <<<<<<<<<<<<<<<<<<<<<<<<
		1893	RunMeas((void*)0, i, scanon); // TODO
		1894	fflush(stdout);
		1895
		1896	i++;
		1897	}
		1898
		1899	// Set angle back to original position
		1900	fflush(stdout);
		1901	printf("Measurement finished, returning to starting incidence angle...\n");
		1902	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 4 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 4 -c m", rootdir, (int)minAlpha, rootdir);
		1903	if(rotUnits->widgetCB->GetSelected() == 0)
		1904	rotPos->widgetNE[0]->SetNumber(minAlpha);
		1905	else if(rotUnits->widgetCB->GetSelected() == 1)
		1906	rotPos->widgetNE[0]->SetNumber(minAlpha*rotconversion);
		1907	#if WORKSTAT == 'I'
		1908	retTemp = system(cmd);
		1909	#else
		1910	printf("Cmd: %s\n",cmd);
		1911	#endif
		1912	fflush(stdout);
		1913
		1914	progVal = 100.00;
		1915	measProgress->widgetPB->SetPosition(progVal);
		1916	printf("\n");
		1917
		1918	sprintf(cmd, "%s/dbg/finish_sig.txt", rootdir);
		1919	pfin = fopen(cmd,"w");
		1920	fprintf(pfin, "%s: Incidence angle scan finished.", timeStamp->widgetTE->GetText());
		1921	fclose(pfin);
		1922
		1923	measProgress->widgetTB[0]->SetText("Start acquisition");
		1924	acqStarted = false;
		1925	}
		1926	}
		1927	// Normal single measurement
		1928	else if( (vscan == 0) && (pscan == 0) && (ascan == 0) )
		1929	{
		1930	// Set the start button to stop and enable stopping of measurement
		1931	if(acqStarted)
		1932	{
		1933	printf("Stopping current single scan...\n");
		1934	gROOT->SetInterrupt();
		1935	measProgress->widgetTB[0]->SetText("Start acquisition");
		1936	acqStarted = false;
		1937	}
		1938	else if(!acqStarted)
		1939	{
		1940	measProgress->widgetTB[0]->SetText("Stop acquisition");
		1941	acqStarted = true;
		1942
		1943	printf("Running a single scan...\n");
		1944	clkt0 = clock();
		1945	timet0 = time(NULL);
		1946	RunMeas((void*)0, 0, scanon);
		1947	printf("Measurement finished...\n");
		1948	printf("\n");
		1949
		1950	measProgress->widgetTB[0]->SetText("Start acquisition");
		1951	acqStarted = false;
		1952	}
		1953	}
		1954	}
		1955
		1956	// Main measurement window connections ----------------------
		1957
		1958	// Histogram file selection pane connections ----------------
		1959
		1960	// File browser for opening histograms
		1961	void TGAppMainFrame::SelectDirectory()
		1962	{
		1963	int i = fileList->GetNumberOfEntries();
		1964	char *cTemp;
		1965
		1966	TGFileInfo file_info;
		1967	const char *filetypes[] = {"Histograms",histextall,0,0};
		1968	file_info.fFileTypes = filetypes;
		1969	cTemp = new char[1024];
		1970	sprintf(cTemp, "%s/results", rootdir);
		1971	file_info.fIniDir = StrDup(cTemp);
		1972	file_info.fMultipleSelection = kTRUE;
		1973	new TGFileDialog(gClient->GetDefaultRoot(), fMain, kFDOpen, &file_info);
		1974	delete[] cTemp;
		1975
		1976	TList *files = file_info.fFileNamesList;
		1977	if(files)
		1978	{
		1979	TSystemFile *file;
		1980	TString fname;
		1981	TIter next(files);
		1982	while(file=(TSystemFile*)next())
		1983	{
		1984	fname = file->GetName();
		1985	fileList->AddEntry(fname.Data(), i);
		1986	i++;
		1987	}
		1988	}
		1989	fileList->Layout();
		1990	}
		1991
		1992	// Toggle multiple selection in filelist or delete all entries
		1993	void TGAppMainFrame::ListMultiSelect(int opt)
		1994	{
		1995	// Enable multiselect
		1996	if(opt == 0)
		1997	{
		1998	fileList->SetMultipleSelections((multiSelect->widgetChBox[0]->IsOn()));
		1999
		2000	if(multiSelect->widgetChBox[1]->IsDown())
		2001	multiSelect->widgetChBox[1]->SetState(kButtonUp);
		2002	}
		2003	else if(opt == 1)
		2004	{
		2005	if(multiSelect->widgetChBox[1]->IsDown())
		2006	{
		2007	multiSelect->widgetChBox[0]->SetState(kButtonDown);
		2008	fileList->SetMultipleSelections((multiSelect->widgetChBox[0]->IsOn()));
		2009	for(int i = 0; i < fileList->GetNumberOfEntries(); i++)
		2010	fileList->Select(i,kTRUE);
		2011	}
		2012	else if(!multiSelect->widgetChBox[1]->IsDown())
		2013	{
		2014	multiSelect->widgetChBox[0]->SetState(kButtonUp);
		2015	fileList->SetMultipleSelections((multiSelect->widgetChBox[0]->IsOn()));
		2016	for(int i = 0; i < fileList->GetNumberOfEntries(); i++)
		2017	fileList->Select(i,kFALSE);
		2018	}
		2019	}
		2020	}
		2021
		2022	// Navigation buttons for the filelist (<<, >>) and double click
		2023	void TGAppMainFrame::FileListNavigation(int opt)
		2024	{
		2025	unsigned int nrfiles = fileList->GetNumberOfEntries();
		2026	int curSel;
		2027	TList *files;
		2028	if( nrfiles > 0 )
		2029	{
		2030	if(opt < -1)
		2031	{
		2032	// turn off multiple selection and select first file on list
		2033	if(multiSelect->widgetChBox[0]->IsOn())
		2034	{
		2035	fileList->SetMultipleSelections(kFALSE);
		2036	multiSelect->widgetChBox[0]->SetState(kButtonUp);
		2037	multiSelect->widgetChBox[1]->SetState(kButtonUp);
		2038
		2039	fileList->Select(0,kTRUE);
		2040	}
		2041	else
		2042	{
		2043	// if nothing is selected, curSel will be -1
		2044	curSel = fileList->GetSelected();
		2045	// go to next file on list
		2046	if(opt == -3)
		2047	{
		2048	if( (curSel == (int)(nrfiles-1)) \|\| (curSel == -1) )
		2049	fileList->Select(0);
		2050	else
		2051	fileList->Select(curSel+1);
		2052	}
		2053	// go to previous file on list
		2054	else if(opt == -2)
		2055	{
		2056	if( (curSel == 0) \|\| (curSel == -1) )
		2057	fileList->Select(nrfiles-1);
		2058	else
		2059	fileList->Select(curSel-1);
		2060	}
		2061	}
		2062	}
		2063	}
		2064
		2065	UpdateHistogram(0);
		2066	}
		2067
		2068	// Open the header edit window when pressing on editHeader button
		2069	void TGAppMainFrame::HeaderEdit()
		2070	{
		2071	bool createTab = true;
		2072	int tabid = -1;
		2073
		2074	for(int i = 0; i < fTab->GetNumberOfTabs(); i++)
		2075	{
		2076	if(strcmp("File header editor", fTab->GetTabTab(i)->GetString() ) == 0)
		2077	{
		2078	createTab = false;
		2079	tabid = i;
		2080	}
		2081
		2082	if(DBGSIG > 1) printf("HeaderEdit(): Name of tab = %s\n", fTab->GetTabTab(i)->GetString() );
		2083	}
		2084
		2085	unsigned int nrfiles = fileList->GetNumberOfEntries();
		2086	if(nrfiles > 0)
		2087	HeaderEditTab(fTab, createTab, &tabid);
		2088	}
		2089
		2090	// Clear the histogram file selection list and dark run analysis selection
		2091	void TGAppMainFrame::ClearHistogramList()
		2092	{
		2093	fileList->RemoveAll();
		2094	darkRun->widgetTE->Clear();
		2095	}
		2096
		2097	// Histogram file selection pane connections ----------------
		2098
		2099	// Histogram controls pane connections ----------------------
		2100
		2101	// Readjust the histogram range after changing ADC, TDC, Y range or logarithmic scale (opt: 0 = normal redraw, 1 = export, 2 = redraw when changing which channel to display)
		2102	void TGAppMainFrame::UpdateHistogram(int opt)
		2103	{
		2104	if(DBGSIG > 1)
		2105	{
		2106	printf("UpdateHistogram(): Clearing the TList\n");
		2107	gDirectory->GetList()->Delete();
		2108	gObjectTable->Print();
		2109	}
		2110
		2111	// Do not do normal histogram update if we have multiple files selected
		2112	if( (opt == 0) && (multiSelect->widgetChBox[0]->IsDown()) )
		2113	{
		2114	printf("UpdateHistogram(): To preview changes done to a histogram, please deselect the \"Multiple files select\" option.");
		2115	return;
		2116	}
		2117
		2118	// Do not update histogram if we are on the same channel
		2119	if( ((opt == 2) && (selChannel != (int)selectCh->widgetNE[0]->GetNumber())) \|\| (opt < 2) )
		2120	{
		2121	unsigned int nrfiles = fileList->GetNumberOfEntries();
		2122	TCanvas *gCanvas;
		2123	char exportname[512];
		2124	char cTemp[512];
		2125
		2126	if(opt == 1)
		2127	gCanvas = analysisCanvas->GetCanvas();
		2128
		2129	if(nrfiles > 0)
		2130	{
		2131	TList *files;
		2132	files = new TList();
		2133	fileList->GetSelectedEntries(files);
		2134
		2135	if(files)
		2136	{
		2137	for(int i = 0; i < (int)nrfiles; i++)
		2138	{
		2139	if(files->At(i))
		2140	{
		2141	if(DBGSIG)
		2142	printf("UpdateHistogram(): Filename: %s\n", files->At(i)->GetTitle());
		2143	if(opt == 1)
		2144	remove_ext((char*)files->At(i)->GetTitle(), cTemp);
		2145	if( fMenuHisttype->IsEntryChecked(M_ANALYSIS_HISTTYPE_1DADC) )
		2146	{
		2147	sprintf(exportname, "%s_adc%d.pdf", cTemp, (int)selectCh->widgetNE[0]->GetNumber());
		2148	DisplayHistogram( (char*)(files->At(i)->GetTitle()), 0, opt);
		2149	}
		2150	else if( fMenuHisttype->IsEntryChecked(M_ANALYSIS_HISTTYPE_1DTDC) )
		2151	{
		2152	sprintf(exportname, "%s_tdc%d.pdf", cTemp, (int)selectCh->widgetNE[0]->GetNumber());
		2153	DisplayHistogram( (char*)(files->At(i)->GetTitle()), 1, opt);
		2154	}
		2155	else if( fMenuHisttype->IsEntryChecked(M_ANALYSIS_HISTTYPE_2D) )
		2156	{
		2157	sprintf(exportname, "%s_adctdc%d.pdf", cTemp, (int)selectCh->widgetNE[0]->GetNumber());
		2158	DisplayHistogram( (char*)(files->At(i)->GetTitle()), 2, opt);
		2159	}
		2160
		2161	if(opt == 1)
		2162	{
		2163	gCanvas->SaveAs(exportname);
		2164	delete inroot;
		2165	}
		2166	}
		2167	}
		2168	}
		2169	}
		2170	selChannel = selectCh->widgetNE[0]->GetNumber();
		2171	}
		2172
		2173	if(DBGSIG > 1)
		2174	{
		2175	printf("UpdateHistogram(): After drawing histograms (connections)\n");
		2176	gObjectTable->Print();
		2177	}
		2178	}
		2179
		2180	// Options for histogram (logarithmic scale, clean plots)
		2181	void TGAppMainFrame::HistogramOptions(int opt)
		2182	{
		2183	// Logarithmic scale
		2184	if(opt == 0)
		2185	UpdateHistogram(0);
		2186	// Clean plots
		2187	else if(opt == 1)
		2188	{
		2189	cleanPlots = histOpt->widgetChBox[1]->IsDown();
		2190	UpdateHistogram(0);
		2191	}
		2192	}
		2193
		2194	// Changing the histogram type to display
		2195	void TGAppMainFrame::ChangeHisttype(int type)
		2196	{
		2197	TGTextButton *pressedB = new TGTextButton();
		2198	int menuID = 0;
		2199	unsigned int nrfiles = fileList->GetNumberOfEntries();
		2200
		2201	// ADC histogram
		2202	if(type == 0)
		2203	{
		2204	pressedB = plotType->widgetTB[0];
		2205	menuID = M_ANALYSIS_HISTTYPE_1DADC;
		2206
		2207	plotType->widgetTB[1]->SetDown(kFALSE);
		2208	plotType->widgetTB[2]->SetDown(kFALSE);
		2209	fMenuHisttype->UnCheckEntry(M_ANALYSIS_HISTTYPE_1DTDC);
		2210	fMenuHisttype->UnCheckEntry(M_ANALYSIS_HISTTYPE_2D);
		2211	}
		2212	// TDC histogram
		2213	else if(type == 1)
		2214	{
		2215	pressedB = plotType->widgetTB[1];
		2216	menuID = M_ANALYSIS_HISTTYPE_1DTDC;
		2217
		2218	plotType->widgetTB[0]->SetDown(kFALSE);
		2219	plotType->widgetTB[2]->SetDown(kFALSE);
		2220	fMenuHisttype->UnCheckEntry(M_ANALYSIS_HISTTYPE_1DADC);
		2221	fMenuHisttype->UnCheckEntry(M_ANALYSIS_HISTTYPE_2D);
		2222	}
		2223	// ADC vs. TDC histogram
		2224	else if(type == 2)
		2225	{
		2226	pressedB = plotType->widgetTB[2];
		2227	menuID = M_ANALYSIS_HISTTYPE_2D;
		2228
		2229	plotType->widgetTB[0]->SetDown(kFALSE);
		2230	plotType->widgetTB[1]->SetDown(kFALSE);
		2231	fMenuHisttype->UnCheckEntry(M_ANALYSIS_HISTTYPE_1DADC);
		2232	fMenuHisttype->UnCheckEntry(M_ANALYSIS_HISTTYPE_1DTDC);
		2233	}
		2234
		2235	if( fMenuHisttype->IsEntryChecked(menuID) )
		2236	{
		2237	pressedB->SetDown(kFALSE);
		2238	fMenuHisttype->UnCheckEntry(menuID);
		2239	}
		2240	else if( !fMenuHisttype->IsEntryChecked(menuID) )
		2241	{
		2242	pressedB->SetDown(kTRUE);
		2243	fMenuHisttype->CheckEntry(menuID);
		2244	}
		2245
		2246	UpdateHistogram(0);
		2247	}
		2248
		2249	// Histogram controls pane connections ----------------------

Subversion Repositories f9daq

(root)/lab/sipmscan/trunk/src/connections.cpp @ 174 - Rev 146