Subversion Repositories f9daq

#include <stdio.h>

#include <stdlib.h>

#include <string.h>

#include "vxi11_user.h"

#include "../include/daqscope.h"

#include "../include/workstation.h"

CLINK *clink;

char *savedIP;

const char *allChans[8] = {"CH1","CH2","CH3","CH4","MATH1","MATH2","MATH3","MATH4"};

const char *measType[11] = {"AMP","ARE","DEL","FALL","FREQ","MAX","MEAN","MINI","PK2P","PWI","RIS"};

char *bbq;

// Query and command functions to simplify analysis --------------

int vxi11_query(CLINK *clink, const char *mycmd)

{

   char buf[WAVE_LEN];

   memset(buf, 0, WAVE_LEN);

   vxi11_send(clink, mycmd);

   int bytes_returned = vxi11_receive(clink, buf, WAVE_LEN);

   if (bytes_returned > 0)

   {

      printf("%s\n", buf);

   }

   else if (bytes_returned == -15)

      printf("*** [ NOTHING RECEIVED ] ***\n");

   return 0;

}

void vxi11_command(CLINK *clink,char *mycmd)

{

   char buf[WAVE_LEN];

   memset(buf, 0, WAVE_LEN);

   vxi11_send(clink, mycmd);

}

// ---------------------------------------------------------------

// Tektronix unit conversion -------------------------------------

double daqscope::tekunit(char *prefix)

{

   if (strcmp(prefix,"m")==0) return 0.001;

   else if (strcmp(prefix,"u")==0) return 0.000001;

   else if (strcmp(prefix,"n")==0) return 0.000000001;

   else return 1;

}

// ---------------------------------------------------------------

// Connect to a scope through IP address IPaddr ------------------

int daqscope::connect(char *IPaddr)

{

   int iTemp;

   char buf[WAVE_LEN];

   printf("daqscope::connect(%s)\n", IPaddr);

   clink = new CLINK;

   iTemp = vxi11_open_device(IPaddr, clink);

   if(iTemp == 0)

   {

      vxi11_send(clink, "*IDN?");

      vxi11_receive(clink, buf, WAVE_LEN);

      printf("Connected to device (%s): %s\n", IPaddr, buf);

      savedIP = IPaddr;

      return iTemp;

   }

   else

      return iTemp;

}

// ---------------------------------------------------------------

// Disconnect from scope with IP address IPaddr ------------------

int daqscope::disconnect(char *IPaddr)

{

   int iTemp;

   printf("daqscope::disconnect(%s)\n", IPaddr);

   iTemp = vxi11_close_device(IPaddr, clink);

   if(iTemp == 0)

   {

      printf("Disconnected from device (%s).\n", IPaddr);

      delete clink;

   }

   return iTemp;

}

// ---------------------------------------------------------------

// Initialize the scope for waveform or measurement --------------

int daqscope::init()

{

   int iTemp;

   char cmd[512];

   char cTemp[256];

   printf("daqscope::init()\n");

   printf("Measurement type is: %d\n", scopeUseType);

   // For measurements, only one channel can be used (rise, fall, period,...)

   if(scopeUseType == 2) scopeChanNr = 1;

   printf("Nr. of channels selected: %d\n", scopeChanNr);

   // Only use scope if measurement is different than 0

   if(scopeUseType == 0)

      return 0;

   else

   {

      // Combine all selected channels into a comma separated string

      for(int i = 0; i < scopeChanNr; i++)

      {

         if(i == scopeChanNr-1)

         {

   	    if(i == 0) sprintf(scopeChanstring, "%s", allChans[scopeChans[i]]);

            else sprintf(cTemp, "%s", allChans[scopeChans[i]]);

         }

         else

         {

      	    if(i == 0) sprintf(scopeChanstring, "%s,", allChans[scopeChans[i]]);

            else sprintf(cTemp, "%s,", allChans[scopeChans[i]]);

         }

         if(i > 0)

            strcat(scopeChanstring, cTemp);

      }

      printf("Selected channels: %s\n", scopeChanstring);

      // Check scope ID and turn the header display on

#if WORKSTAT == 'I' || WORKSTAT == 'S'

      vxi11_query(clink, "*IDN?");

      vxi11_command(clink,(char*)"HEADER ON");

#else

      printf("Identify Tek (*IDN?, HEADER ON)\n");

#endif

      // Set the scope data sources

      sprintf(cmd, "DATA:SOURCE %s", scopeChanstring);

#if WORKSTAT == 'I' || WORKSTAT == 'S'

      vxi11_command(clink,cmd);

#else

      printf("Set data source (DATA:SOURCE): %s\n", cmd);

#endif

      // Set to fast acquisition and set encoding

#if WORKSTAT == 'I' || WORKSTAT == 'S'

      vxi11_command(clink,(char*)"FASTACQ:STATE 0");

      vxi11_command(clink,(char*)"DATA:ENCDG SRIBINARY");

      vxi11_command(clink,(char*)"WFMO:BYT_N 2");

      // Set gating (currently not used)

      vxi11_command(clink,(char*)"GAT OFF");

#else

      printf("Set fastacq, encoding and gating (FASTACQ:STATE 0, DATA:ENCDG SRIBINARY, WFMO:BYT_N 2, MEASU:GAT OFF).\n");

#endif

      // Check scale on each of selected channels (is this even needed?)

      bbq = strtok(scopeChanstring,",");

      while(bbq != NULL)

      {

         sprintf(cmd,"%s:SCALE?",bbq);

#if WORKSTAT == 'I' || WORKSTAT == 'S'

         vxi11_query(clink,cmd);

#else

         printf("Return the scale of channel: %s\n", cmd);

#endif

         bbq = strtok(NULL, ",");

      }

      // Check waveform and data options/settings

      char buf[WAVE_LEN];

      memset(buf, 0, WAVE_LEN);

#if WORKSTAT == 'I' || WORKSTAT == 'S'

      vxi11_send(clink, "WFMO:WFID?");

      iTemp = vxi11_receive(clink, buf, WAVE_LEN);

      printf("Init out (length = %d): %s\n", iTemp, buf);

#else

      printf("Get acquisition parameters (WFMOUTPRE:WFID?).\n");

      sprintf(buf, ":WFMOUTPRE:WFID \"Ch1, DC coupling, 20.0mV/div, 10.0ns/div, 500 points, Sample mode\"");

      iTemp = strlen(buf);

#endif

      if (iTemp == -15)

         printf("\n*** [ NOTHING RECEIVED ] ***\n");

      else

      {

         bbq = strtok(buf,","); // break WFID out into substrings

         for (int k = 0; k < 5; k++)

	 {

            // info on voltage per division setting

            if (k == 2)

	    {

               memcpy(cTemp, &bbq[1], 5);

               cTemp[5] = 0;

               bbq[7] = 0;

               tekvolt = atoi(cTemp)*tekunit(&bbq[6]);

	       printf("Voltage per division: %lf\n", tekvolt);

            }

            // info on time per division setting

            if (k == 3)

	    {

               memcpy(cTemp, &bbq[1], 5);

               cTemp[5] = 0;

               bbq[7] = 0;

               tektime = atoi(cTemp)*tekunit(&bbq[6]);

	       printf("Time per division: %lf\n", tektime);

            }

            // info on last point to be transfered by CURVE?

            if (k == 4)

	    {

               bbq[strlen(bbq)-7] = 0;

               sprintf(cmd, "DATA:STOP %d", atoi(bbq));

#if WORKSTAT == 'I' || WORKSTAT == 'S'

               vxi11_command(clink, cmd);

#else

	       printf("Stop data collection (DATA:STOP): %s\n", cmd);

#endif

            }

//	    printf("bbq = %s\n",bbq);

            bbq = strtok (NULL, ",");

         }

      }

      // Recheck waveform and data options/settings, turn off header

#if WORKSTAT == 'I' || WORKSTAT == 'S'

      vxi11_query(clink,"WFMO:WFID?");

      vxi11_query(clink,"DATA?");

      vxi11_command(clink,(char*)"HEADER OFF");

#else

      printf("Data format query (WFMOUTPRE:WFID?, DATA?, HEADER OFF).\n");

#endif

      // Get the channel y-axis offset (only for one CH so far)

      char posoff[WAVE_LEN];

#if WORKSTAT == 'I' || WORKSTAT == 'S'

      sprintf(cmd, "%s:POS?", allChans[scopeChans[0]]);

      vxi11_command(clink, cmd);

      vxi11_receive(clink, posoff, WAVE_LEN);

      choffset = (double)atof(posoff);

#else

      sprintf(posoff, "Just some temporary string info.");

      printf("Check for channel position offset (CHx:POS?)\n");

#endif

      // If measurements are to be performed

      if(scopeUseType == 2)

      {

	 sprintf(cmd, "MEASU:IMM:SOURCE1 %s", scopeChanstring);

#if WORKSTAT == 'I' || WORKSTAT == 'S'

	 vxi11_command(clink, cmd);

#else

         printf("Set immediate measurement source (MEASU:IMM:SOURCE1): %s\n", cmd);

#endif

	 sprintf(cmd, "MEASU:IMM:TYP %s", measType[scopeMeasSel]);

#if WORKSTAT == 'I' || WORKSTAT == 'S'

	 vxi11_command(clink, cmd);

#else

	 printf("Set immediate measurement type (MEASU:IMM:TYP): %s\n", cmd);

#endif

      }

      return 0;

   }

}

// ---------------------------------------------------------------

// Send a custom command to the scope ----------------------------

int daqscope::customCommand(char *command, bool query, char *sReturn)

{

   if(query)

   {

      char buf[WAVE_LEN];

      memset(buf, 0, WAVE_LEN);

      vxi11_send(clink, command);

      int bytes_returned = vxi11_receive(clink, buf, WAVE_LEN);

      if (bytes_returned > 0)

      {

         printf("%s\n", buf);

	 sprintf(sReturn, "%s", buf);

	 // For testing purposes

/*	 if( strcmp(command, "CURVE?") == 0 )

	 {

	    FILE *fp;

	    char tst[2];

	    fp = fopen("./curve_return.txt","w");

            for(int i = 6; i < bytes_returned; i++)

	    {

	       if(i%2 == 1)

	       {

		  tst[0] = buf[i];

		  tst[1] = buf[i-1];

	          fprintf(fp, "bytes returned = %d\tbyte %d = %d\treturn = %s\n", bytes_returned, i, buf[i], tst);

	       }

	       else

	          fprintf(fp, "bytes returned = %d\tbyte %d = %d\n", bytes_returned, i, buf[i]);

	    }

	    fclose(fp);

	 }*/

      }

      else if (bytes_returned == -15)

      {

         printf("*** [ NOTHING RECEIVED ] ***\n");

	 sprintf(sReturn, "*** [ NOTHING RECEIVED ] ***");

      }

   }

   else

   {

      vxi11_command(clink, command);

      sprintf(sReturn, "*** [ COMMAND NOT QUERY - NO RETURN ] ***");

   }

   return 0;

}

// ---------------------------------------------------------------

// Get a measuring event (either waveform or measure) ------------

int daqscope::lockunlock(bool lockit)

{

   // Lock the scope front panel for measurements

   if(lockit)

   {

#if WORKSTAT == 'I' || WORKSTAT == 'S'

      vxi11_command(clink,(char*)"LOCK ALL");

      return 0;

#else

//      printf("Locking the front panel (LOCK ALL).\n");

      return -1;

#endif

   }

   // Unlock the scope front panel after measurements

   else

   {

#if WORKSTAT == 'I' || WORKSTAT == 'S'

      vxi11_command(clink,(char*)"LOCK NONE");

      return 0;

#else

//      printf("Unlocking the front panel (LOCK ALL).\n");

      return -1;

#endif

   }

}

// ---------------------------------------------------------------

// Get a measuring event (either waveform or measure) ------------

int daqscope::event()

{

   int bytes_returned;

   if(scopeUseType == 0)

      return -1;

   else if(scopeUseType == 1)

   {

#if WORKSTAT == 'I' || WORKSTAT == 'S'

      memset(eventbuf, 0, WAVE_LEN);

      vxi11_send(clink, "CURVE?");

      bytes_returned = vxi11_receive(clink, eventbuf, WAVE_LEN);

#else

      printf("Ask to return the waveform (CURVE?)\n");

      bytes_returned = 0;

#endif

      if(bytes_returned > 0) return 0;

      else return -1;

   }

   else if(scopeUseType == 2)

   {

#if WORKSTAT == 'I' || WORKSTAT == 'S'

      char buf[WAVE_LEN];

      memset(buf, 0, WAVE_LEN);

      vxi11_send(clink, "MEASU:IMMED:VALUE?");

      bytes_returned = vxi11_receive(clink, buf, WAVE_LEN);

      measubuf = (double)atof(buf);

#else

//      printf("Ask to return the measurement (MEASU:IMMED:VALUE?)\n");

      bytes_returned = 0;

      measubuf = (double)rand()/(double)RAND_MAX;

#endif

      if(bytes_returned > 0) return 0;

      else return -1;

   }

   else

      return -1;

}

// ---------------------------------------------------------------

// daqscope class constructor and destructor ---------------------

daqscope::daqscope() {

   fStop=0;

}

daqscope::~daqscope() {

   disconnect(savedIP);

}

// ---------------------------------------------------------------