WebSVN - f9daq - Blame - Rev 203 - /cvi/instr/DRS/drs4.c

Rev	Author	Line No.	Line
203	f9daq	1	#include <formatio.h>
195	f9daq	2	#include <utility.h>
		3	#include <ansi_c.h>
203	f9daq	4	#include <cvirte.h>
195	f9daq	5	#include <userint.h>
		6	#include "drs4.h"
203	f9daq	7	#include "drsread.h"
195	f9daq	8
203	f9daq	9	#define MIKRO
		10
		11	#ifdef MIKRO
		12	#include "MIKRO.h"
		13	#endif
		14
195	f9daq	15	static int daq_on;
203	f9daq	16	static int ph, p2,plothandle[4]= {0,0,0,0};
195	f9daq	17	static int tfID;
		18	static int controlID;
		19
203	f9daq	20	#define MAX_THREADS 10
195	f9daq	21
203	f9daq	22	static CmtThreadPoolHandle poolHandle = 0;
195	f9daq	23
		24	int main (int argc, char *argv[]) {
203	f9daq	25	short port;
		26	if (InitCVIRTE (0, argv, 0) == 0)
		27	return -1; /* out of memory */
		28	if ((ph = LoadPanel (0, "drs4.uir", PANEL)) < 0)
		29	return -1;
		30	if ((p2 = LoadPanel (0, "drs4.uir", SCAN)) < 0)
		31	return -1;
		32	SetStdioPort (CVI_STDIO_WINDOW);
		33	SetSleepPolicy(VAL_SLEEP_MORE);
		34	CmtNewThreadPool (MAX_THREADS, &poolHandle);
		35
		36	DisplayPanel (ph);
		37	DisplayPanel (p2);
		38
		39	#ifdef MIKRO
		40	GetCtrlVal(p2, SCAN_PORT, &port);
		41	if (MIKRO_Open (port)) MessagePopup ("Error", "Mikro Port Not found !\n Change in the GUI") ;
		42	MIKRO_Init(1,0);
		43	MIKRO_Init(2,0);
		44	#endif
		45
		46	RunUserInterface ();
		47	DiscardPanel (ph);
		48	DiscardPanel (p2);
		49	CmtDiscardThreadPool (poolHandle);
		50	MIKRO_Close ();
		51	return 0;
195	f9daq	52	}
		53
		54
		55
		56
		57
		58	static void start_timer (double tout) {
203	f9daq	59	SetCtrlAttribute (ph, PANEL_TIMER, ATTR_INTERVAL, tout);
		60	SetCtrlAttribute (ph, PANEL_TIMER, ATTR_ENABLED, 1);
195	f9daq	61	}
		62
		63	static void stop_timer ( void ) {
203	f9daq	64	SetCtrlAttribute (ph, PANEL_TIMER, ATTR_ENABLED, 0);
		65	DRSSetTimeout();
195	f9daq	66	}
		67
		68
		69
		70
		71	void CVICALLBACK EndOfThread ( CmtThreadPoolHandle poolhandle,
203	f9daq	72	CmtThreadFunctionID functionID, unsigned int event,
		73	int value, void *callbackData ) {
195	f9daq	74
203	f9daq	75	daq_on=0;
		76	//SetDimming(0);
		77	printf("End of Thread \n");
		78	return ;
195	f9daq	79
		80	}
		81
		82
203	f9daq	83	int CVICALLBACK daq(void *functionData) {
195	f9daq	84
		85
203	f9daq	86	int neve;
		87	char filename[0xff];
		88	int imask[4];
		89	unsigned long mask;
		90	int frequency;
		91	double trgdelay;
		92	double trglevel;
		93	int trgtype;
		94	int trgchannel;
		95	int trgpolarity;
		96	int verbose;
		97	double range;
		98	int pfreq;
		99	int enabledoutput;
		100	int neveold = 0;
		101	double rate;
		102	int args = (int ) functionData;
201	f9daq	103
203	f9daq	104	GetCtrlVal(ph, PANEL_FILENAME, filename );
		105	GetCtrlVal(ph, PANEL_CH0, &imask[0] );
		106	GetCtrlVal(ph, PANEL_CH1, &imask[1] );
		107	GetCtrlVal(ph, PANEL_CH2, &imask[2] );
		108	GetCtrlVal(ph, PANEL_CH3, &imask[3] );
		109	mask = 0;
		110	for (int i=0; i<4; i++) {
		111	if (imask[i]) mask \|= (1<<i);
201	f9daq	112	}
203	f9daq	113
		114	GetCtrlVal(ph,PANEL_NEVE, &neve);
		115	GetCtrlVal(ph,PANEL_DEBUG, &verbose);
		116	GetCtrlVal(ph,PANEL_PFREQ, &pfreq);
		117	GetCtrlVal(ph,PANEL_ENABLEDOUTPUT, &enabledoutput);
		118
		119	GetCtrlVal(ph,PANEL_FREQUENCY, &frequency);
		120	GetCtrlVal(ph,PANEL_TRGDELAY, &trgdelay);
		121	GetCtrlVal(ph,PANEL_TRGCHANNEL, &trgchannel);
		122
		123	GetCtrlVal(ph,PANEL_TRGTYPE, &trgtype);
		124	GetCtrlVal(ph,PANEL_TRGLEVEL, &trglevel);
		125	GetCtrlVal(ph,PANEL_TRGPOLARITY, &trgpolarity);
		126	GetCtrlVal(ph,PANEL_RANGE, &range);
		127
		128
		129	//printf("mask=0x%x\n",mask);
		130
		131	DRSSetMask( (unsigned char)( mask & 0xF ) );
		132
		133	DRSSetFrequency( frequency );
		134	DRSSetTriggerDelay(trgdelay );
		135	DRSSetTriggerChannel(trgchannel );
		136	DRSSetTriggerType( trgtype );
		137	DRSSetTriggerLevel(trglevel);
		138	DRSSetTriggerPolarity(trgpolarity);
		139
		140	DRSSetRange ( range );
		141
		142
		143
		144	FILE *fp= NULL;
		145
		146	if (enabledoutput) {
		147	if (args[0]) fp = fopen(filename,"wb");
		148	else fp = fopen(filename,"ab");
		149	}
		150
		151	static unsigned char *buffer;
		152
		153	int buffer_size = 0;
		154	const int nBoards=1;
		155	const int waveDepth=1024;
		156	if (buffer_size == 0) {
		157	buffer_size = 4 + nBoards * (4 + 4(4+waveDepth4));
		158	buffer_size += 24 + nBoards * (8 + 4(4+waveDepth2));
		159	buffer = (unsigned char *)malloc(buffer_size);
		160	}
		161
		162	time_t t=0,told=0, tstart=0;
		163
		164	if (!DRSInit()) {
		165	time(&tstart);
		166	told=tstart;
		167	int i=0;
		168	for (i=0; i<neve; i++) {
		169	start_timer(1);// 1 s timeout
		170	int retval = DRSRead(0);
		171	stop_timer();
		172	int nb = ( retval == 0 && fp ) ? DRSToBuffer( buffer , i ) : 0;
		173	SetCtrlVal(ph,PANEL_CEVE,i);
		174	if (retval) i--;
		175	if (!daq_on) break;
		176	time(&t);
		177	if (t!=told ) {
		178	rate = (i-neveold);
		179	printf("%d events in %2.2f min (%d s) Rate %f Hz %s ",i+1, (double)(t-tstart)/60.,(t-tstart), rate , ctime(&t));
		180	GetCtrlVal(ph,PANEL_PFREQ, &pfreq);
		181	neveold = i;
		182	}
		183	told=t;
		184	// Save data
		185	if (nb>0 && fp) fwrite(buffer, 1,nb ,fp);
		186	// Plot Data
		187	if (i % pfreq == 0) for (int k=0; k<4; k++) {
		188	if (! (mask & ( 0x1<<k )) ) continue;
		189	float *t=DRSGetTime(k);
		190	float *x=DRSGetWave(k);
		191
		192	const int col[4]= {VAL_WHITE,VAL_RED,VAL_GREEN,VAL_BLUE};
		193	if (plothandle[k]) DeleteGraphPlot (ph, PANEL_GRAPH, plothandle[k], VAL_IMMEDIATE_DRAW);
		194	plothandle[k] = PlotXY (ph, PANEL_GRAPH, t, x, 1024, VAL_FLOAT, VAL_FLOAT, VAL_THIN_LINE, VAL_NO_POINT, VAL_SOLID, 1, col[k]);
		195
		196	for (int i=0 ; i<1024 ; i++) {
		197	if (verbose) printf("[%d] %d. x= %3.2f y=%3.2f\n", k, i, t[i], x[i] );
		198	//h[k]->Fill( t[i], x[i]*1e-3);
		199	}
		200	}
		201
		202
		203	}
		204	time(&t);
		205	printf("%d events in %2.2f min (%d s) %s",i+1, (double)(t-tstart)/60.,t-tstart, ctime(&t));
		206	DRSEnd();
		207	}
		208
		209	if (fp) fclose(fp);
		210
		211	free(buffer);
		212
		213	return 0;
		214
195	f9daq	215	}
		216
		217
		218
203	f9daq	219	int CVICALLBACK scan(void *functionData) {
195	f9daq	220
203	f9daq	221	int dx[2];
		222	int nx[2];
		223	int x0[2];
		224	int ix[2];
		225	int size;
		226
		227	char buffer[12]="POSR";
		228	int n = (int ) &buffer[4];
		229	char filename[0xFF];
		230	int enabledoutput;
		231
		232	FILE *fp;
		233	GetCtrlVal(ph, PANEL_FILENAME, filename );
		234
		235	GetCtrlVal(ph,PANEL_ENABLEDOUTPUT, &enabledoutput);
		236
		237	if ( GetFileInfo(filename,&size) ) {
		238	MessagePopup ("Warning", "File exist. Remove it first or choose another file");
		239	return 0;
		240	}
		241	GetCtrlVal(p2, SCAN_STEPX, &dx[0]);
		242	GetCtrlVal(p2, SCAN_STEPY, &dx[1]);
		243	GetCtrlVal(p2, SCAN_NSTEPSX, &nx[0]);
		244	GetCtrlVal(p2, SCAN_NSTEPSY, &nx[1]);
		245	GetCtrlVal(p2, SCAN_STARTX, &x0[0]);
		246	GetCtrlVal(p2, SCAN_STARTY, &x0[1]);
		247	for (int i=0; i<nx[0]; i++) {
		248
		249	ix[0]= x0[0]+i*dx[0];
		250	#ifdef MIKRO
		251	MIKRO_MoveTo(1,ix[0]);
		252	#endif
		253	SetCtrlVal (p2, SCAN_IX, i);
		254	for (int j=0; j<nx[1]; j++) {
		255
		256	SetCtrlVal (p2, SCAN_IY, j);
		257
		258	ix[1]= x0[1]+j*dx[1];
		259	#ifdef MIKRO
		260	MIKRO_MoveTo(2,ix[1]);
		261
		262	MIKRO_GetPosition(1,&n[0]);
		263	SetCtrlVal (p2, SCAN_XP, n[0]);
		264	MIKRO_GetPosition(2,&n[1]);
		265	SetCtrlVal (p2, SCAN_YP, n[1]);
		266	if (enabledoutput) {
		267	fp = fopen(filename,"ab");
		268	if (fp) {
		269	fwrite(buffer, 1,12 ,fp);
		270	fclose(fp);
		271	}
		272	}
		273
		274	#endif
		275	daq(functionData);
		276	if (!daq_on) break;
		277	}
		278	if (!daq_on) break;
		279	}
		280
		281	return 0;
195	f9daq	282	}
		283
203	f9daq	284
195	f9daq	285	int CVICALLBACK StartCB (int panel, int control, int event,
203	f9daq	286	void *callbackData, int eventData1, int eventData2) {
		287	ThreadFunctionPtr mythread = NULL;
		288	switch (event) {
		289
		290	case EVENT_COMMIT:
		291
		292	controlID=0;
		293	if (panel == ph && control == PANEL_START) {
		294	mythread = daq;
		295	controlID= control;
		296	}
		297	if (panel == p2 && control == SCAN_SCAN) mythread = scan;
		298	if (mythread!=NULL) {
		299	printf("New Thread panel=%d button=%d\n", panel, control);
		300
		301	// SetDimming(1);
		302
		303	daq_on=1;
		304	CmtScheduleThreadPoolFunctionAdv (poolHandle, mythread, &controlID,
		305	DEFAULT_THREAD_PRIORITY,
		306	EndOfThread,
		307	EVENT_TP_THREAD_FUNCTION_END,
		308	NULL, RUN_IN_SCHEDULED_THREAD,
		309	&tfID);
		310	}
		311	break;
		312	}
		313	return 0;
195	f9daq	314	}
		315
		316	int CVICALLBACK StopCB (int panel, int control, int event,
203	f9daq	317	void *callbackData, int eventData1, int eventData2) {
		318	switch (event) {
		319	case EVENT_COMMIT:
		320	daq_on=0;
		321	break;
		322	}
		323	return 0;
195	f9daq	324	}
		325
		326	int CVICALLBACK ExitCB (int panel, int control, int event,
203	f9daq	327	void *callbackData, int eventData1, int eventData2) {
		328	switch (event) {
		329	case EVENT_COMMIT:
		330	QuitUserInterface (0);
		331	break;
		332	}
		333	return 0;
195	f9daq	334	}
203	f9daq	335
		336	int CVICALLBACK MoveStageCB (int panel, int control, int event,
		337	void *callbackData, int eventData1, int eventData2) {
		338	int axis=0, step=1000, direction=1, n;
		339	switch (event) {
		340	case EVENT_COMMIT:
		341
		342	if (panel == p2) {
		343	switch (control) {
		344	case SCAN_BR :
		345	axis = 1;
		346	direction = 1;
		347	GetCtrlVal(p2, SCAN_STEPX, &step);
		348	break;
		349	case SCAN_BL :
		350	axis = 1;
		351	direction = -1;
		352	GetCtrlVal(p2, SCAN_STEPX, &step);
		353	break;
		354	case SCAN_BU :
		355	axis = 2;
		356	direction = 1;
		357	GetCtrlVal(p2, SCAN_STEPY, &step);
		358	break;
		359	case SCAN_BD :
		360	axis = 2;
		361	direction = -1;
		362	GetCtrlVal(p2, SCAN_STEPY, &step);
		363	break;
		364	}
		365	#ifdef MIKRO
		366	MIKRO_MoveFor(axis, direction*step );
		367	MIKRO_GetPosition(axis,&n);
		368	if (axis == 1) SetCtrlVal (p2, SCAN_XP, n);
		369	if (axis == 2) SetCtrlVal (p2, SCAN_YP, n);
		370	#endif // MIKRO
		371	}
		372
		373	break;
		374	}
		375	return 0;
		376	}
		377
		378
		379
		380
		381
		382	int CVICALLBACK GoXCB (int panel, int control, int event,
		383	void *callbackData, int eventData1, int eventData2) {
		384	int n2;
		385	switch (event) {
		386	case EVENT_COMMIT:
		387	GetCtrlVal (p2, SCAN_XG, &n2);
		388	#ifdef MIKRO
		389	MIKRO_MoveTo(1,n2);
		390	MIKRO_GetPosition(1,&n2);
		391
		392	#endif
		393	SetCtrlVal (p2, SCAN_XP, n2);
		394	break;
		395	}
		396	return 0;
		397	}
		398
		399	int CVICALLBACK GoYCB (int panel, int control, int event,
		400	void *callbackData, int eventData1, int eventData2) {
		401	int n2;
		402	switch (event) {
		403	case EVENT_COMMIT:
		404	GetCtrlVal (p2, SCAN_YG, &n2);
		405	#ifdef MIKRO
		406	MIKRO_MoveTo(2,n2);
		407	MIKRO_GetPosition(2,&n2);
		408
		409	#endif
		410	SetCtrlVal (p2, SCAN_YP, n2);
		411	break;
		412	}
		413	return 0;
		414	}
		415
		416	int CVICALLBACK GetCurrentPositionCB (int panel, int control, int event,
		417	void *callbackData, int eventData1, int eventData2) {
		418
		419	int n[2];
		420	switch (event) {
		421	case EVENT_COMMIT:
		422	#ifdef MIKRO
		423	MIKRO_GetPosition(1,&n[0]);
		424	SetCtrlVal (p2, SCAN_XP, n[0]);
		425	MIKRO_GetPosition(2,&n[1]);
		426	SetCtrlVal (p2, SCAN_YP, n[1]);
		427	#endif
		428	break;
		429	}
		430	return 0;
		431	}
		432
		433	int CVICALLBACK HomeCB (int panel, int control, int event,
		434	void *callbackData, int eventData1, int eventData2) {
		435	switch (event) {
		436	case EVENT_COMMIT:
		437	#ifdef MIKRO
		438	MIKRO_ReferenceMove(1);
		439	MIKRO_ReferenceMove(2);
		440	GetCurrentPositionCB(panel, control, event, NULL, 0, 0);
		441	#endif
		442	break;
		443	}
		444	return 0;
		445	}

Subversion Repositories f9daq

(root)/cvi/instr/DRS/drs4.c @ 210 - Rev 203