WebSVN – f9daq – Blame – //lab/sipmscan/trunk/src/connections.cpp

Rev	Author	Line No.	Line
146	f9daq	1	#include "../include/sipmscan.h"
		2	#include "../include/workstation.h"
		3
		4	#include <stdio.h>
		5	#include <stdlib.h>
		6
		7	int retTemp;
		8
		9	// Additional functions -------------------------------------
		10
		11	// Display the currently selected histogram in the file list
		12	void TGAppMainFrame::DisplayHistogram(char *histfile, int histtype, int opt)
		13	{
		14	char histtime[256];
		15	char ctemp[512];
		16
		17	if(DBGSIG)
		18	printf("DisplayHistogram(): Selected file: %s\n", histfile);
		19
		20	TCanvas *gCanvas = analysisCanvas->GetCanvas();
		21
		22	inroot = TFile::Open(histfile, "READ");
		23
		24	TTree header_data, meas_data;
		25	inroot->GetObject("header_data", header_data);
		26	inroot->GetObject("meas_data", meas_data);
		27
		28	// Reading the header
		29	header_data->SetBranchAddress("nrch", &evtheader.nrch);
		30	header_data->GetEntry(0);
		31	header_data->SetBranchAddress("timestamp", &evtheader.timestamp);
		32	header_data->GetEntry(0);
		33	header_data->SetBranchAddress("biasvolt", &evtheader.biasvolt);
		34	header_data->GetEntry(0);
		35	header_data->SetBranchAddress("xpos", &evtheader.xpos);
		36	header_data->GetEntry(0);
		37	header_data->SetBranchAddress("ypos", &evtheader.ypos);
		38	header_data->GetEntry(0);
		39	header_data->SetBranchAddress("zpos", &evtheader.zpos);
		40	header_data->GetEntry(0);
		41	header_data->SetBranchAddress("temperature", &evtheader.temperature);
		42	header_data->GetEntry(0);
		43	if( header_data->FindBranch("angle") )
		44	{
		45	header_data->SetBranchAddress("angle", &evtheader.angle);
		46	header_data->GetEntry(0);
		47	}
		48	header_data->SetBranchAddress("laserinfo", &evtheader.laserinfo);
		49	header_data->GetEntry(0);
		50
		51	// Change timestamp to local time
		52	GetTime(evtheader.timestamp, histtime);
		53
		54	// Displaying header information debug
		55	if(DBGSIG)
		56	{
		57	printf("DisplayHistogram(): Opened file header information:\n");
		58	printf("- Number of channels (ADC and TDC are considered as separate channels): %d\n", evtheader.nrch);
		59	printf("- Timestamp: %d (%s)\n", evtheader.timestamp, histtime);
		60	printf("- Bias voltage: %lf\n", evtheader.biasvolt);
		61	printf("- Table position (X,Y,Z): %d, %d, %d\n", evtheader.xpos, evtheader.ypos, evtheader.zpos);
		62	if(evtheader.temperature)
		63	printf("- Temperature: %lf\n", evtheader.temperature);
		64	if( header_data->FindBranch("angle") )
		65	printf("- Incidence angle: %lf\n", evtheader.angle);
		66	else
		67	printf("- Incidence angle: No angle information!\n");
		68	printf("- Laser and filter settings: %s\n", evtheader.laserinfo);
		69	}
		70
		71	// Displaying header information on the GUI
		72	dispTime->widgetTE->SetText(histtime);
		73	dispBias->widgetNE[0]->SetNumber(evtheader.biasvolt);
		74	sprintf(ctemp, "%d, %d, %d", evtheader.xpos, evtheader.ypos, evtheader.zpos);
		75	dispPos->widgetTE->SetText(ctemp);
		76	if(evtheader.temperature)
		77	dispTemp->widgetNE[0]->SetNumber(evtheader.temperature);
		78	else
		79	dispTemp->widgetNE[0]->SetNumber(0.0);
		80	if( header_data->FindBranch("angle") )
		81	dispAngle->widgetNE[0]->SetNumber(evtheader.angle);
		82	else
		83	dispAngle->widgetNE[0]->SetNumber(0.0);
		84	dispLaser->widgetTE->SetText(evtheader.laserinfo);
		85
		86	selectCh->widgetNE[0]->SetLimitValues(0, (evtheader.nrch/2)-1);
		87
		88	// Redraw the histograms
		89	int j;
		90	char rdc[256];
		91	char rdcsel[256];
		92
		93	j = selectCh->widgetNE[0]->GetNumber();
		94
		95	printf("Found %d data points.\n", (int)meas_data->GetEntries());
		96
		97	gCanvas->cd();
		98	double range[4];
		99	range[0] = adcRange->widgetNE[0]->GetNumber();
		100	range[1] = adcRange->widgetNE[1]->GetNumber();
		101	range[2] = tdcRange->widgetNE[0]->GetNumber();
		102	range[3] = tdcRange->widgetNE[1]->GetNumber();
		103
		104	// ADC histogram
		105	if(histtype == 0)
		106	{
		107	if( range[0] == range[1] )
		108	sprintf(rdc, "ADC%d>>%s", j, histname);
		109	else
		110	sprintf(rdc, "ADC%d>>%s(%d,%lf,%lf)", j, histname, (int)(range[1]-range[0]), range[0]-0.5, range[1]-0.5);
		111
		112	sprintf(rdcsel, "(TDC%d>%lf)&&(TDC%d<%lf)", j, range[2]tdctimeconversion, j, range[3]tdctimeconversion);
		113	meas_data->Draw(rdc, rdcsel);
		114
		115	sprintf(rdc, "ADC%d, Vbias=%.3lf, TDC=(%.2lf,%.2lf);ADC;", j, evtheader.biasvolt, range[2], range[3]);
		116	TH1F histtemp = (TH1F)gCanvas->GetPrimitive(histname);
		117	if(!cleanPlots)
		118	histtemp->SetTitle(rdc);
		119	else
		120	histtemp->SetTitle(";ADC;");
		121	histtemp->GetXaxis()->SetLabelSize(0.025);
		122	histtemp->GetXaxis()->CenterTitle(kTRUE);
		123	histtemp->GetYaxis()->SetLabelSize(0.025);
		124	if(cleanPlots)
		125	{
		126	TGaxis yax = (TGaxis)histtemp->GetYaxis();
		127	yax->SetMaxDigits(4);
		128	}
		129
		130	gCanvas->Modified();
		131	gCanvas->Update();
		132
		133	if( yRange->widgetNE[0]->GetNumber() != yRange->widgetNE[1]->GetNumber() )
		134	{
		135	if( (histOpt->widgetChBox[0]->IsDown()) && (yRange->widgetNE[0]->GetNumber() <= 0) )
		136	{
		137	histtemp->GetYaxis()->SetRangeUser(0.5, yRange->widgetNE[1]->GetNumber());
		138	yRange->widgetNE[0]->SetNumber(0.5);
		139	logChange = 1;
		140	}
		141	else
		142	{
		143	gCanvas->SetLogy(kFALSE);
		144	if(logChange == 1)
		145	{
		146	yRange->widgetNE[0]->SetNumber(0.0);
		147	logChange = 0;
		148	}
		149	histtemp->GetYaxis()->SetRangeUser(yRange->widgetNE[0]->GetNumber(), yRange->widgetNE[1]->GetNumber());
		150	}
		151	}
		152
		153	TPaveStats stats = (TPaveStats)histtemp->FindObject("stats");
		154	if(!cleanPlots)
		155	{
		156	stats->SetX1NDC(0.84); stats->SetX2NDC(0.97);
		157	stats->SetY1NDC(0.87); stats->SetY2NDC(0.97);
		158	}
		159	else
		160	{
		161	stats->SetX1NDC(1.1); stats->SetX2NDC(1.3);
		162	stats->SetY1NDC(1.1); stats->SetY2NDC(1.3);
		163	}
		164	}
		165	// TDC histogram
		166	else if(histtype == 1)
		167	{
		168	if( range[0] == range[1] )
		169	sprintf(rdc, "(TDC%d/%lf)>>%s", j, tdctimeconversion, histname);
		170	else
		171	sprintf(rdc, "(TDC%d/%lf)>>%s(%d,%lf,%lf)", j, tdctimeconversion, histname, (int)((range[3]-range[2])*tdctimeconversion), range[2], range[3]);
		172
		173	sprintf(rdcsel, "(TDC%d>%lf)&&(TDC%d<%lf)", j, range[2]tdctimeconversion, j, range[3]tdctimeconversion);
		174	meas_data->Draw(rdc, rdcsel);
		175
		176	sprintf(rdc, "TDC%d, Vbias=%.3lf, TDC=(%.2lf,%.2lf);Time (TDC channel) [ns];", j, evtheader.biasvolt, range[2], range[3]);
		177	TH1F histtemp = (TH1F)gCanvas->GetPrimitive(histname);
		178	if(!cleanPlots)
		179	histtemp->SetTitle(rdc);
		180	else
		181	histtemp->SetTitle(";Time (TDC channel) [ns];");
		182	histtemp->GetXaxis()->SetLabelSize(0.025);
		183	histtemp->GetXaxis()->CenterTitle(kTRUE);
		184	histtemp->GetYaxis()->SetLabelSize(0.025);
		185	if(cleanPlots)
		186	{
		187	TGaxis yax = (TGaxis)histtemp->GetYaxis();
		188	yax->SetMaxDigits(4);
		189	}
		190
		191	gCanvas->Modified();
		192	gCanvas->Update();
		193
		194	if( yRange->widgetNE[0]->GetNumber() != yRange->widgetNE[1]->GetNumber() )
		195	{
		196	if( (histOpt->widgetChBox[0]->IsDown()) && (yRange->widgetNE[0]->GetNumber() <= 0) )
		197	{
		198	histtemp->GetYaxis()->SetRangeUser(0.5, yRange->widgetNE[1]->GetNumber());
		199	yRange->widgetNE[0]->SetNumber(0.5);
		200	logChange = 1;
		201	}
		202	else
		203	{
		204	gCanvas->SetLogy(kFALSE);
		205	if(logChange == 1)
		206	{
		207	yRange->widgetNE[0]->SetNumber(0.0);
		208	logChange = 0;
		209	}
		210	histtemp->GetYaxis()->SetRangeUser(yRange->widgetNE[0]->GetNumber(), yRange->widgetNE[1]->GetNumber());
		211	}
		212	}
		213
		214	TPaveStats stats = (TPaveStats)histtemp->FindObject("stats");
		215	if(!cleanPlots)
		216	{
		217	stats->SetX1NDC(0.84); stats->SetX2NDC(0.97);
		218	stats->SetY1NDC(0.87); stats->SetY2NDC(0.97);
		219	}
		220	else
		221	{
		222	stats->SetX1NDC(1.1); stats->SetX2NDC(1.3);
		223	stats->SetY1NDC(1.1); stats->SetY2NDC(1.3);
		224	}
		225	}
		226	// ADC vs. TDC histogram
		227	else if(histtype == 2)
		228	{
		229	if( ((range[0] == range[1]) && (range[2] == range[3])) \|\| (range[2] == range[3]) \|\| (range[0] == range[1]) )
		230	sprintf(rdc, "(TDC%d/%lf):ADC%d>>%s", j, tdctimeconversion, j, histname);
		231	else
		232	sprintf(rdc, "(TDC%d/%lf):ADC%d>>%s(%d,%lf,%lf,%d,%lf,%lf)", j, tdctimeconversion, j, histname, (int)(range[1]-range[0])/2, range[0]-0.5, range[1]-0.5, (int)((range[3]-range[2])*tdctimeconversion)/2, range[2], range[3]);
		233	meas_data->Draw(rdc,"","COLZ");
		234
		235	sprintf(rdc, "ADC/TDC%d, Vbias=%.3lf, TDC=(%.2lf,%.2lf);ADC;TDC", j, evtheader.biasvolt, range[2], range[3]);
		236	TH2F histtemp = (TH2F)gCanvas->GetPrimitive(histname);
		237	if(!cleanPlots)
		238	histtemp->SetTitle(rdc);
		239	else
		240	histtemp->SetTitle(";ADC;Time (TDC channel) [ns]");
		241	histtemp->GetXaxis()->SetLabelSize(0.025);
		242	histtemp->GetXaxis()->CenterTitle(kTRUE);
		243	histtemp->GetYaxis()->SetLabelSize(0.025);
		244	histtemp->GetYaxis()->CenterTitle(kTRUE);
		245	histtemp->GetYaxis()->SetTitleOffset(1.35);
		246	if(cleanPlots)
		247	{
		248	TGaxis yax = (TGaxis)histtemp->GetYaxis();
		249	yax->SetMaxDigits(4);
		250	}
		251
		252	gCanvas->Modified();
		253	gCanvas->Update();
		254
		255	TPaveStats stats = (TPaveStats)histtemp->FindObject("stats");
		256	stats->SetX1NDC(1.1); stats->SetX2NDC(1.3);
		257	stats->SetY1NDC(1.1); stats->SetY2NDC(1.3);
		258
		259	TPaletteAxis gpalette = (TPaletteAxis)histtemp->GetListOfFunctions()->FindObject("palette");
		260	gpalette->SetLabelSize(0.022);
		261	}
		262
		263	if(histtype < 2)
		264	{
		265	if( histOpt->widgetChBox[0]->IsDown() )
		266	gCanvas->SetLogy(kTRUE);
		267	else if( !histOpt->widgetChBox[0]->IsDown() )
		268	gCanvas->SetLogy(kFALSE);
		269	}
		270	else
		271	gCanvas->SetLogy(kFALSE);
		272
		273	gCanvas->Modified();
		274	gCanvas->Update();
		275
		276	delete header_data;
		277	delete meas_data;
		278
		279	// Delete the opened file when we just display it in the analysis canvas (otherwise wait for histogram save)
		280	if(opt != 1)
		281	delete inroot;
		282
		283	// If you close the opened file (delete inroot), the data can not be accessed by other functions (any time we wish to use the data directly from histogram, we need to call the DisplayHistogram function -> using different opt to determine what we need to do)
		284	}
		285
		286	// Start a measurement (acquisition from CAMAC)
		287	void TGAppMainFrame::RunMeas(void *ptr, int runCase, int &scanon)
		288	{
		289	int vscan = 0, pscan = 0, zscan = 0, ascan = 0;
		290	if(scansOn->widgetChBox[0]->IsDown()) vscan = 1;
		291	if(scansOn->widgetChBox[1]->IsDown()) pscan = 1;
		292	if(scansOn->widgetChBox[2]->IsDown()) zscan = 1;
		293	if(scansOn->widgetChBox[3]->IsDown()) ascan = 1;
		294
		295	printf("Start of Run, run case %d\n", runCase);
		296
		297	float progVal;
		298
		299	char ctemp[256];
		300	char ctemp2[256];
		301	char fname[256];
		302	int itemp = 0;
		303	TH1F *liveHist;
		304
		305	float minVoltage, maxVoltage, stepVoltage, diffVoltage;
		306	float minXpos, maxXpos, stepXpos, diffXpos;
		307	float minYpos, maxYpos, stepYpos, diffYpos;
		308	float minZpos, maxZpos, stepZpos, diffZpos;
		309	float minAlpha, maxAlpha, stepAlpha, diffAlpha;
		310
		311	minVoltage = vOutStart->widgetNE[0]->GetNumber();
		312	maxVoltage = vOutStop->widgetNE[0]->GetNumber();
		313	diffVoltage = abs(maxVoltage - minVoltage);
		314	stepVoltage = abs(vOutStep->widgetNE[0]->GetNumber());
		315	minXpos = xPosMin->widgetNE[0]->GetNumber();
		316	maxXpos = xPosMax->widgetNE[0]->GetNumber();
		317	diffXpos = abs(maxXpos - minXpos);
		318	stepXpos = abs(xPosStep->widgetNE[0]->GetNumber());
		319	minYpos = yPosMin->widgetNE[0]->GetNumber();
		320	maxYpos = yPosMax->widgetNE[0]->GetNumber();
		321	diffYpos = abs(maxYpos - minYpos);
		322	stepYpos = abs(yPosStep->widgetNE[0]->GetNumber());
		323	minZpos = zPosMin->widgetNE[0]->GetNumber();
		324	maxZpos = zPosMax->widgetNE[0]->GetNumber();
		325	diffZpos = abs(maxZpos - minZpos);
		326	stepZpos = abs(zPosStep->widgetNE[0]->GetNumber());
		327	minAlpha = rotPosMin->widgetNE[0]->GetNumber();
		328	maxAlpha = rotPosMax->widgetNE[0]->GetNumber();
		329	diffAlpha = abs(maxAlpha - minAlpha);
		330	stepAlpha = abs(rotPosStep->widgetNE[0]->GetNumber());
		331
		332	remove_ext((char*)fileName->widgetTE->GetText(), ctemp);
		333
		334	// TODO - angle scan + voltage scan
		335	// Voltage or surface scan
		336	if( vscan \|\| pscan \|\| ascan )
		337	{
		338	// No Z scan, No angle scan
		339	if(!zscan && !ascan)
		340	{
		341	// When we have a voltage scan
		342	if( vscan && (stepVoltage > 0.) )
		343	SeqNumber(runCase, (int)diffVoltage/stepVoltage, ctemp2);
		344	// With only a surface scan
		345	else if(pscan)
		346	{
		347	if( stepXpos == 0 )
		348	itemp = 1;
		349	else
		350	itemp = (int)diffXpos/stepXpos;
		351
		352	if( stepYpos == 0 )
		353	itemp *= 1;
		354	else
		355	itemp *= (int)diffYpos/stepYpos;
		356	SeqNumber(runCase, itemp, ctemp2);
		357	}
		358	sprintf(fname, "%s_%s%s", ctemp, ctemp2, histext);
		359	}
		360	// With Z scan, No angle scan
		361	else if(zscan && !ascan)
		362	{
		363	SeqNumber((int)zPos->widgetNE[0]->GetNumber(), maxZpos, ctemp2);
		364
		365	// Voltage scan is on
		366	if( vscan && (stepVoltage > 0.) )
		367	{
		368	sprintf(fname, "%s_z%s_", ctemp, ctemp2);
		369	SeqNumber(runCase, (int)diffVoltage/stepVoltage+1, ctemp2);
		370	strcat(fname, ctemp2);
		371	strcat(fname, histext);
		372	}
		373	// Surface scan is on
		374	else if(pscan)
		375	{
		376	sprintf(fname, "%s_z%s_", ctemp, ctemp2);
		377
		378	if( stepXpos == 0 )
		379	itemp = 1;
		380	else
		381	itemp = (int)diffXpos/stepXpos+1;
		382
		383	if( stepYpos == 0 )
		384	itemp *= 1;
		385	else
		386	itemp *= (int)diffYpos/stepYpos+1;
		387	SeqNumber(runCase, itemp, ctemp2);
		388	strcat(fname, ctemp2);
		389	strcat(fname, histext);
		390	}
		391	// Just Z scan
		392	else
		393	sprintf(fname, "%s_z%s%s", ctemp, ctemp2, histext);
		394	}
		395	// No Z scan, With angle scan
		396	else if(!zscan && ascan)
		397	{
		398	SeqNumber(runCase, (int)diffAlpha/stepAlpha, ctemp2);
		399
		400	// Voltage scan is on
		401	if( vscan && (stepVoltage > 0.) )
		402	{
		403	sprintf(fname, "%s_phi%s_", ctemp, ctemp2);
		404	SeqNumber(runCase, (int)diffVoltage/stepVoltage+1, ctemp2);
		405	strcat(fname, ctemp2);
		406	strcat(fname, histext);
		407	}
		408	// Just angle scan
		409	else
		410	sprintf(fname, "%s_phi%s%s", ctemp, ctemp2, histext);
		411	}
		412	}
		413	// All the rest
		414	else if(!vscan && !pscan)
		415	sprintf(fname, "%s%s", ctemp, histext);
		416
		417	// Check if set voltage is below the hard limit
		418	if( vOut->widgetNE[0]->GetNumber() > vHardlimit->widgetNE[0]->GetNumber() )
		419	{
		420	printf("Voltage hard limit triggered (%lf > %lf)!\n", vOut->widgetNE[0]->GetNumber(), vHardlimit->widgetNE[0]->GetNumber() );
		421	vOut->widgetNE[0]->SetNumber( vHardlimit->widgetNE[0]->GetNumber() );
		422	}
		423
		424	printf("Output file is (runCase = %d): %s\n", runCase, fname);
		425
		426	// Writing to output file
		427	outroot = TFile::Open(fname, "RECREATE");
		428
		429	TTree *header_data = new TTree("header_data", "Header information for the measurement.");
		430	TTree *meas_data = new TTree("meas_data", "Saved ADC and TDC measurement data.");
		431	TTree *scope_data = new TTree("scope_data", "Saved scope measurement data.");
		432
		433	// Branches for the header
		434	header_data->Branch("nrch", &evtheader.nrch, "nrch/I");
		435	header_data->Branch("timestamp", &evtheader.timestamp, "timestamp/I");
		436	header_data->Branch("biasvolt", &evtheader.biasvolt, "biasvolt/D");
		437	header_data->Branch("xpos", &evtheader.xpos, "xpos/I");
		438	header_data->Branch("ypos", &evtheader.ypos, "ypos/I");
		439	header_data->Branch("zpos", &evtheader.zpos, "zpos/I");
		440	header_data->Branch("temperature", &evtheader.temperature, "temperature/D");
		441	header_data->Branch("angle", &evtheader.angle, "angle/D");
		442	header_data->Branch("laserinfo", &evtheader.laserinfo, "laserinfo/C");
		443
		444	evtheader.nrch = (int)NCH->widgetNE[0]->GetNumber()*2;
		445	evtheader.timestamp = (int)time(NULL);
		446	evtheader.biasvolt = (double)vOut->widgetNE[0]->GetNumber();
		447	if(posUnits->widgetCB->GetSelected() == 0)
		448	{
		449	evtheader.xpos = (int)xPos->widgetNE[0]->GetNumber();
		450	evtheader.ypos = (int)yPos->widgetNE[0]->GetNumber();
		451	evtheader.zpos = (int)zPos->widgetNE[0]->GetNumber();
		452	}
		453	else if(posUnits->widgetCB->GetSelected() == 1)
		454	{
		455	evtheader.xpos = (int)xPos->widgetNE[0]->GetNumber()/lenconversion;
		456	evtheader.ypos = (int)yPos->widgetNE[0]->GetNumber()/lenconversion;
		457	evtheader.zpos = (int)zPos->widgetNE[0]->GetNumber()/lenconversion;
		458	}
		459	evtheader.temperature = (double)chtemp->widgetNE[0]->GetNumber();
		460	if(rotUnits->widgetCB->GetSelected() == 0)
		461	evtheader.angle = (double)rotPos->widgetNE[0]->GetNumber()*rotconversion;
		462	else if(rotUnits->widgetCB->GetSelected() == 1)
		463	evtheader.angle = (double)rotPos->widgetNE[0]->GetNumber();
		464	sprintf(evtheader.laserinfo, "%s", laserInfo->widgetTE->GetText());
		465
		466	char histtime[256];
		467	GetTime(evtheader.timestamp, histtime);
		468
		469	printf("Save file header information:\n");
		470	printf("- Number of channels: %d\n", evtheader.nrch);
		471	printf("- Timestamp: %d (%s)\n", evtheader.timestamp, histtime);
		472	printf("- Bias voltage: %lf\n", evtheader.biasvolt);
		473	printf("- Table position (X,Y,Z): %d, %d, %d\n", evtheader.xpos, evtheader.ypos, evtheader.zpos);
		474	printf("- Temperature: %lf\n", evtheader.temperature);
		475	printf("- Incidence angle: %lf\n", evtheader.angle);
		476	printf("- Laser and filter settings: %s\n", evtheader.laserinfo);
		477
		478	header_data->Fill();
		479
		480	// Branches for ADC and TDC data
		481	for(int i = 0; i < evtheader.nrch/2; i++)
		482	{
		483	sprintf(ctemp, "ADC%d", i);
		484	sprintf(fname, "ADC%d/I", i);
		485	meas_data->Branch(ctemp, &evtdata.adcdata[i], fname);
		486
		487	sprintf(ctemp, "TDC%d", i);
		488	sprintf(fname, "TDC%d/I", i);
		489	meas_data->Branch(ctemp, &evtdata.tdcdata[i], fname);
		490	}
		491
		492	//TODO
		493	// Initialize the scope before measurement
		494	/* if( sCamaclink->IsDown() )
		495	InitializeScope();*/
		496
		497	// Branch for scope measurement data
		498	/* if(gScopeDaq->scopeUseType == 2) // only if we select waveform measurement
		499	{
		500	if(gScopeDaq->scopeMeasSel == 0)
		501	scope_data->Branch("amp", &evtmeas.measdata, "amp/D");
		502	else if(gScopeDaq->scopeMeasSel == 1)
		503	scope_data->Branch("area", &evtmeas.measdata, "area/D");
		504	else if(gScopeDaq->scopeMeasSel == 2)
		505	scope_data->Branch("delay", &evtmeas.measdata, "delay/D");
		506	else if(gScopeDaq->scopeMeasSel == 3)
		507	scope_data->Branch("fall", &evtmeas.measdata, "fall/D");
		508	else if(gScopeDaq->scopeMeasSel == 4)
		509	scope_data->Branch("freq", &evtmeas.measdata, "freq/D");
		510	else if(gScopeDaq->scopeMeasSel == 5)
		511	scope_data->Branch("max", &evtmeas.measdata, "max/D");
		512	else if(gScopeDaq->scopeMeasSel == 6)
		513	scope_data->Branch("mean", &evtmeas.measdata, "mean/D");
		514	else if(gScopeDaq->scopeMeasSel == 7)
		515	scope_data->Branch("min", &evtmeas.measdata, "min/D");
		516	else if(gScopeDaq->scopeMeasSel == 8)
		517	scope_data->Branch("pk2p", &evtmeas.measdata, "pk2p/D");
		518	else if(gScopeDaq->scopeMeasSel == 9)
		519	scope_data->Branch("pwidth", &evtmeas.measdata, "pwidth/D");
		520	else if(gScopeDaq->scopeMeasSel == 10)
		521	scope_data->Branch("rise", &evtmeas.measdata, "rise/D");
		522	}*/
		523
		524	int neve = (int) evtNum->widgetNE[0]->GetNumber();
		525	int allEvt, zProg;
		526	zProg = 1;
		527
		528	#if WORKSTAT == 'I'
		529	#else
		530	// ONLY FOR TESTING!
		531	TRandom *randNum = new TRandom();
		532	randNum->SetSeed(0);
		533	// ONLY FOR TESTING!
		534	#endif
		535
		536	// Initialize the CAMAC
		537	if (gDaq)
		538	{
		539	if(scanon == 0)
		540	{
		541	gDaq->init(evtheader.nrch);
		542	scanon = 1;
		543	}
		544	gDaq->fStop=0;
		545
		546	// Set the stopwatch
		547	clock_t clkt1;
		548
		549	// Prepare histogram for live histogram update
		550	int liven;
		551	TCanvas *gCanvas;
		552	if(liveUpdate && (!vscan && !pscan && !zscan && !ascan))
		553	{
		554	gCanvas = measCanvas->GetCanvas();
		555	gCanvas->SetGrid();
		556	gCanvas->cd();
		557	liveHist = new TH1F(histname,"",(int)TMath::Sqrt(neve),0,0);
		558	liven = 1;
		559	}
		560
		561	// Start gathering
		562	gDaq->start();
		563
		564	for (int n=0;n<neve && !gDaq->fStop ;/n++/)
		565	{
		566	int nb = gDaq->event(gBuf,BSIZE);
		567
		568	#if WORKSTAT == 'I'
		569	#else
		570	// ONLY FOR TESTING!
		571	for(int i=0; i < evtheader.nrch; i++)
		572	{
		573	if(i == 1)
		574	gBuf[i] = randNum->Gaus(1500,300);
		575	else if(i == 0)
		576	gBuf[i] = randNum->Poisson(2500);
		577	}
		578	// ONLY FOR TESTING!
		579	#endif
		580	if (nb<=0) n--;
		581
		582	int nc=0;
		583
		584	while ( (nb>0) && (n<neve) )
		585	{
		586	for(int i = 0; i < evtheader.nrch; i++)
		587	{
		588	unsigned short adc = gBuf[i+nc]&0xFFFF;
		589	if(i % 2 == 0) // TDC
		590	evtdata.tdcdata[i/2] = (int)adc;
		591	else if(i % 2 == 1) // ADC
		592	evtdata.adcdata[i/2] = (int)adc;
		593
		594	// Start plotting the scope waveform
		595	/* if( (gScopeDaq->scopeUseType == 1) && (sCamaclink->IsDown()) )
		596	StartScopeAcq();*/ // TODO
		597	}
		598	meas_data->Fill();
		599	n++;
		600
		601	// Start making a scope measurement
		602	/* if( (gScopeDaq->scopeUseType == 2) && (sCamaclink->IsDown()) )
		603	{
		604	StartScopeAcq();
		605	evtmeas.measdata = gScopeDaq->measubuf;
		606	}
		607	scope_data->Fill();*/ // TODO
		608
		609	// Start filling the histogram (only in normal single scan)
		610	if(liveUpdate && (!vscan && !pscan && !zscan && !ascan))
		611	{
		612	liveHist->Fill(evtdata.adcdata[0]);
		613	if( n == (neve*liven)/10 )
		614	{
		615	gCanvas->cd();
		616	liveHist->Draw("");
		617	gCanvas->Modified();
		618	gCanvas->Update();
		619	liven++;
		620	}
		621	}
		622
		623	nc += evtheader.nrch;
		624	nb -= evtheader.nrch;
		625	}
		626
		627	MyTimer();
		628	allEvt = n;
		629	if (gSystem->ProcessEvents()) printf("Run Interrupted\n");
		630
		631	if( acqStarted && (n == (neve*zProg)/10) && (!vscan && !pscan && !zscan && !ascan) )
		632	{
		633	// Progress the progress bar
		634	progVal = (float)zProg*10;
		635	measProgress->widgetPB->SetPosition(progVal);
		636
		637	// Calculate the remaining time
		638	TimeEstimate(clkt0, timet0, progVal, ctemp, 0);
		639	printf("End time: %s\n", ctemp);
		640	measProgress->widgetTE->SetText(ctemp);
		641
		642	gVirtualX->Update(1);
		643	zProg++;
		644	}
		645	}
		646
		647	printf("Number of gathered events: %d\n", allEvt);
		648	measProgress->widgetTB[0]->SetText("Start acquisition");
		649	acqStarted = false;
		650
		651	gDaq->stop();
		652	}
		653
		654	printf("End of Run neve=%d\n",neve);
		655
		656	header_data->Write();
		657	meas_data->Write();
		658	// scope_data->Write(); // TODO
		659	delete header_data;
		660	delete meas_data;
		661	delete scope_data;
		662
		663	// Remove the histogram
		664	if(liveUpdate && (!vscan && !pscan && !zscan && !ascan))
		665	delete liveHist;
		666
		667
		668	outroot->Close();
		669	}
		670
		671	int TGAppMainFrame::MyTimer()
		672	{
		673	char cmd[100];
		674	GetTime(-1, cmd);
		675	if (timeStamp) timeStamp->widgetTE->SetText(cmd);
		676	return 0;
		677	}
		678
		679	// Additional functions -------------------------------------
		680
		681	// Settings pane connections --------------------------------
		682
		683	// Enable or disable scans
		684	void TGAppMainFrame::EnableScan(int type)
		685	{
		686	// Voltage scan
		687	if(type == 0)
		688	{
		689	if(scansOn->widgetChBox[type]->IsOn())
		690	{
		691	vOutStart->widgetNE[0]->SetState(kTRUE);
		692	vOutStop->widgetNE[0]->SetState(kTRUE);
		693	vOutStep->widgetNE[0]->SetState(kTRUE);
		694	}
		695	else
		696	{
		697	vOutStart->widgetNE[0]->SetState(kFALSE);
		698	vOutStop->widgetNE[0]->SetState(kFALSE);
		699	vOutStep->widgetNE[0]->SetState(kFALSE);
		700	}
		701	}
		702	// Surface (X, Y axis) scan
		703	else if(type == 1)
		704	{
		705	if(scansOn->widgetChBox[type]->IsOn())
		706	{
		707	xPosMin->widgetNE[0]->SetState(kTRUE);
		708	xPosMax->widgetNE[0]->SetState(kTRUE);
		709	xPosStep->widgetNE[0]->SetState(kTRUE);
		710	yPosMin->widgetNE[0]->SetState(kTRUE);
		711	yPosMax->widgetNE[0]->SetState(kTRUE);
		712	yPosStep->widgetNE[0]->SetState(kTRUE);
		713	}
		714	else
		715	{
		716	xPosMin->widgetNE[0]->SetState(kFALSE);
		717	xPosMax->widgetNE[0]->SetState(kFALSE);
		718	xPosStep->widgetNE[0]->SetState(kFALSE);
		719	yPosMin->widgetNE[0]->SetState(kFALSE);
		720	yPosMax->widgetNE[0]->SetState(kFALSE);
		721	yPosStep->widgetNE[0]->SetState(kFALSE);
		722	}
		723	}
		724	// Z axis scan
		725	else if(type == 2)
		726	{
		727	if(scansOn->widgetChBox[type]->IsOn())
		728	{
		729	zPosMin->widgetNE[0]->SetState(kTRUE);
		730	zPosMax->widgetNE[0]->SetState(kTRUE);
		731	zPosStep->widgetNE[0]->SetState(kTRUE);
		732	}
		733	else
		734	{
		735	zPosMin->widgetNE[0]->SetState(kFALSE);
		736	zPosMax->widgetNE[0]->SetState(kFALSE);
		737	zPosStep->widgetNE[0]->SetState(kFALSE);
		738	}
		739	}
		740	// Incidence angle scan
		741	else if(type == 3)
		742	{
		743	if(scansOn->widgetChBox[type]->IsOn())
		744	{
		745	rotPosMin->widgetNE[0]->SetState(kTRUE);
		746	rotPosMax->widgetNE[0]->SetState(kTRUE);
		747	rotPosStep->widgetNE[0]->SetState(kTRUE);
		748	}
		749	else
		750	{
		751	rotPosMin->widgetNE[0]->SetState(kFALSE);
		752	rotPosMax->widgetNE[0]->SetState(kFALSE);
		753	rotPosStep->widgetNE[0]->SetState(kFALSE);
		754	}
		755	}
		756	}
		757
		758	// Apply the upper voltage limit from settings pane to main window
		759	void TGAppMainFrame::VoltageLimit()
		760	{
		761	vOut->widgetNE[0]->SetLimitValues(0, vHardlimit->widgetNE[0]->GetNumber() );
		762	}
		763
		764	// Select the table position units to be used (1 = 0.3595 micron)
		765	void TGAppMainFrame::ChangeUnits(int type)
		766	{
		767	int pos[12], poslim[3], chng = 0;
		768	double micro[12], microlim[3];
		769
		770	TGNumberEntry *posEntries[12];
		771	posEntries[0] = (TGNumberEntry*)xPos->widgetNE[0];
		772	posEntries[1] = (TGNumberEntry*)yPos->widgetNE[0];
		773	posEntries[2] = (TGNumberEntry*)zPos->widgetNE[0];
		774	posEntries[3] = (TGNumberEntry*)xPosMin->widgetNE[0];
		775	posEntries[4] = (TGNumberEntry*)xPosMax->widgetNE[0];
		776	posEntries[5] = (TGNumberEntry*)xPosStep->widgetNE[0];
		777	posEntries[6] = (TGNumberEntry*)yPosMin->widgetNE[0];
		778	posEntries[7] = (TGNumberEntry*)yPosMax->widgetNE[0];
		779	posEntries[8] = (TGNumberEntry*)yPosStep->widgetNE[0];
		780	posEntries[9] = (TGNumberEntry*)zPosMin->widgetNE[0];
		781	posEntries[10] = (TGNumberEntry*)zPosMax->widgetNE[0];
		782	posEntries[11] = (TGNumberEntry*)zPosStep->widgetNE[0];
		783
		784	// Table position values
		785	if(type == 0)
		786	{
		787	// Check if we had microns before
		788	if(posEntries[0]->GetNumStyle() == TGNumberFormat::kNESRealTwo)
		789	chng = 1;
		790
		791	// Change to table position values
		792	if(chng == 1)
		793	{
		794	for(int i = 0; i < 12; i++)
		795	{
		796	if(posEntries[i]->GetNumber() == 0.0)
		797	pos[i] = 0;
		798	else
		799	pos[i] = (int)posEntries[i]->GetNumber()/lenconversion;
		800	}
		801
		802	poslim[0] = -100;
		803	poslim[1] = 215000;
		804	poslim[2] = 375000;
		805
		806	for(int i = 0; i < 12; i++)
		807	{
		808	posEntries[i]->SetNumStyle(TGNumberFormat::kNESInteger);
		809	if( (i > 8) \|\| (i == 2) ) // limits for Z axis (longer table)
		810	posEntries[i]->SetLimits(TGNumberFormat::kNELLimitMinMax, poslim[0], poslim[2]);
		811	else
		812	posEntries[i]->SetLimits(TGNumberFormat::kNELLimitMinMax, poslim[0], poslim[1]);
		813
		814	posEntries[i]->SetNumber(pos[i]);
		815	}
		816	}
		817	}
		818	// Microns
		819	else if(type == 1)
		820	{
		821	// Check if we had table position values before
		822	if(posEntries[0]->GetNumStyle() == TGNumberFormat::kNESInteger)
		823	chng = 1;
		824
		825	// Change to microns
		826	if(chng == 1)
		827	{
		828	for(int i = 0; i < 12; i++)
		829	{
		830	if(posEntries[i]->GetNumber() == 0.0)
		831	micro[i] = 0.;
		832	else
		833	micro[i] = (double)posEntries[i]->GetNumber()*lenconversion;
		834	}
		835
		836	microlim[0] = (double)-100*lenconversion;
		837	microlim[1] = (double)215000*lenconversion;
		838	microlim[2] = (double)375000*lenconversion;
		839
		840	for(int i = 0; i < 12; i++)
		841	{
		842	posEntries[i]->SetNumStyle(TGNumberFormat::kNESRealTwo);
		843	if( (i > 8) \|\| (i == 2) ) // limits for Z axis (longer table)
		844	posEntries[i]->SetLimits(TGNumberFormat::kNELLimitMinMax, microlim[0], microlim[2]);
		845	else
		846	posEntries[i]->SetLimits(TGNumberFormat::kNELLimitMinMax, microlim[0], microlim[1]);
		847
		848	posEntries[i]->SetNumber(micro[i]);
		849	}
		850	}
		851	}
		852	}
		853
		854	// Select the rotation units to be used (1 = 6.3281/3600 degrees)
		855	void TGAppMainFrame::ChangeUnitsRot(int type)
		856	{
		857	int rot[4], rotlim[2], chng = 0;
		858	double deg[4], deglim[2];
		859
		860	TGNumberEntry *rotEntries[4];
		861	rotEntries[0] = (TGNumberEntry*)rotPos->widgetNE[0];
		862	rotEntries[1] = (TGNumberEntry*)rotPosMin->widgetNE[0];
		863	rotEntries[2] = (TGNumberEntry*)rotPosMax->widgetNE[0];
		864	rotEntries[3] = (TGNumberEntry*)rotPosStep->widgetNE[0];
		865
		866	// Rotation values
		867	if(type == 0)
		868	{
		869	// Check if we had degrees before
		870	if(rotEntries[0]->GetNumStyle() == TGNumberFormat::kNESRealTwo)
		871	chng = 1;
		872
		873	// Change to rotation values
		874	if(chng == 1)
		875	{
		876	for(int i = 0; i < 4; i++)
		877	{
		878	if(rotEntries[i]->GetNumber() == 0.0)
		879	rot[i] = 0;
		880	else
		881	rot[i] = (int)rotEntries[i]->GetNumber()/rotconversion;
		882	}
		883
		884	rotlim[0] = (int)-180/rotconversion;
		885	rotlim[1] = (int)180/rotconversion;
		886
		887	for(int i = 0; i < 4; i++)
		888	{
		889	rotEntries[i]->SetNumStyle(TGNumberFormat::kNESInteger);
		890	rotEntries[i]->SetLimits(TGNumberFormat::kNELLimitMinMax, rotlim[0], rotlim[1]);
		891
		892	rotEntries[i]->SetNumber(rot[i]);
		893	}
		894	}
		895	}
		896	// Degree
		897	else if(type == 1)
		898	{
		899	// Check if we had table position values before
		900	if(rotEntries[0]->GetNumStyle() == TGNumberFormat::kNESInteger)
		901	chng = 1;
		902
		903	// Change to degrees
		904	if(chng == 1)
		905	{
		906	for(int i = 0; i < 4; i++)
		907	{
		908	if(rotEntries[i]->GetNumber() == 0)
		909	deg[i] = 0.;
		910	else
		911	deg[i] = (double)rotEntries[i]->GetNumber()*rotconversion;
		912	}
		913
		914	deglim[0] = -180.;
		915	deglim[1] = 180.;
		916
		917	for(int i = 0; i < 4; i++)
		918	{
		919	rotEntries[i]->SetNumStyle(TGNumberFormat::kNESRealTwo);
		920	rotEntries[i]->SetLimits(TGNumberFormat::kNELLimitMinMax, deglim[0], deglim[1]);
		921
		922	rotEntries[i]->SetNumber(deg[i]);
		923	}
		924	}
		925	}
		926	}
		927
		928	// Enable display canvas to have a live update of histogram
		929	void TGAppMainFrame::EnableLiveUpdate()
		930	{
		931	liveUpdate = liveDisp->widgetChBox[0]->IsDown();
		932	}
		933
		934	// Settings pane connections --------------------------------
		935
		936	// Main measurement window connections ----------------------
		937
		938	// Get the currently selected channel
		939	int TGAppMainFrame::GetChannel()
		940	{
		941	int selectedOutput;
		942	if(vOutCh->widgetCB->GetSelected() < 8) selectedOutput = (vOutCh->widgetCB->GetSelected())+1;
		943	else if( (vOutCh->widgetCB->GetSelected() >= 8) && (vOutCh->widgetCB->GetSelected() < 16) ) selectedOutput = (vOutCh->widgetCB->GetSelected())+93;
		944	else selectedOutput = 1;
		945
		946	return selectedOutput;
		947	}
		948
		949	// Set, get or reset the output voltage
		950	void TGAppMainFrame::VoltOut(int opt)
		951	{
		952	char cmd[256];
		953
		954	// Set the selected voltage
		955	if(opt == 0)
		956	{
		957	int outOn;
		958	float outputVoltage;
		959
		960	outputVoltage = vOut->widgetNE[0]->GetNumber();
		961
		962	if(vOutOpt->widgetChBox[1]->IsOn()) outOn = 1;
		963	else outOn = 0;
		964
		965	fflush(stdout);
		966	sprintf(cmd, "%s/src/mpod/mpod_voltage.sh -o %d -v %f -s %d", rootdir, GetChannel(), outputVoltage, outOn);
		967	#if WORKSTAT == 'I'
		968	retTemp = system(cmd);
		969	#else
		970	printf("Cmd: %s\n",cmd);
		971	#endif
		972	fflush(stdout);
		973	}
		974	// Get current voltage
		975	else if(opt == 1)
		976	{
		977	fflush(stdout);
		978	sprintf(cmd, "%s/src/mpod/mpod_voltage.sh -o %d -g > %s/settings/curvolt.txt", rootdir, GetChannel(), rootdir);
		979	#if WORKSTAT == 'I'
		980	retTemp = system(cmd);
		981	#else
		982	printf("Cmd: %s\n",cmd);
		983	#endif
		984	fflush(stdout);
		985
		986	#if WORKSTAT == 'I'
		987	FILE* fvolt;
		988	double dtemp;
		989	char ctemp[24];
		990	sprintf(cmd, "%s/settings/curvolt.txt", rootdir);
		991	fvolt = fopen(cmd, "r");
		992
		993	if(fvolt != NULL)
		994	{
		995	sprintf(cmd, "WIENER-CRATE-MIB::outputVoltage.u%d = Opaque: Float: %s V\n", GetChannel()-1, "%lf" );
		996	retTemp = fscanf(fvolt, cmd, &dtemp);
		997	vOut->widgetNE[0]->SetNumber(dtemp);
		998	sprintf(cmd, "WIENER-CRATE-MIB::outputSwitch.u%d = INTEGER: %s\n", GetChannel()-1, "%s" );
		999	retTemp = fscanf(fvolt, cmd, ctemp);
		1000	if( strcmp(ctemp, "On(1)") == 0 )
		1001	vOutOpt->widgetChBox[1]->SetState(kButtonDown);
		1002	else if( strcmp(ctemp, "Off(0)") == 0 )
		1003	vOutOpt->widgetChBox[1]->SetState(kButtonUp);
		1004	}
		1005
		1006	fclose(fvolt);
		1007	#endif
		1008	}
		1009	// Reset output voltage (if stuck in interlock)
		1010	else if(opt == 2)
		1011	{
		1012	vOut->widgetNE[0]->SetNumber(0.000);
		1013	vOutOpt->widgetChBox[1]->SetState(kButtonUp);
		1014
		1015	fflush(stdout);
		1016	sprintf(cmd, "%s/src/mpod/mpod_voltage.sh -r %d", rootdir, GetChannel());
		1017	#if WORKSTAT == 'I'
		1018	retTemp = system(cmd);
		1019	#else
		1020	printf("Cmd: %s\n",cmd);
		1021	#endif
		1022	fflush(stdout);
		1023	}
		1024	}
		1025
		1026	// Set output voltage polarity to negative
		1027	void TGAppMainFrame::NegativePolarity()
		1028	{
		1029	double newHardlimit;
		1030	int polar = 0; // 0 = positive, 1 = negative
		1031
		1032	if(vOutOpt->widgetChBox[0]->IsOn())
		1033	polar = 1;
		1034	else
		1035	polar = 0;
		1036
		1037	// Set hard limit to the negative version of what it was before
		1038	if( (vHardlimit->widgetNE[0]->GetNumber() > 0.) && (polar == 1) )
		1039	newHardlimit = -(vHardlimit->widgetNE[0]->GetNumber());
		1040	else if( (vHardlimit->widgetNE[0]->GetNumber() < 0.) && (polar == 0) )
		1041	newHardlimit = -(vHardlimit->widgetNE[0]->GetNumber());
		1042	else if(vHardlimit->widgetNE[0]->GetNumber() == 0.)
		1043	newHardlimit = 0.;
		1044	else
		1045	newHardlimit = vHardlimit->widgetNE[0]->GetNumber();
		1046
		1047	// Apropriately set the limit to the output voltage number entry
		1048	vHardlimit->widgetNE[0]->SetNumber(newHardlimit);
		1049
		1050	if(polar == 1)
		1051	vOut->widgetNE[0]->SetLimits(TGNumberFormat::kNELLimitMinMax, newHardlimit, 0.);
		1052	else if(polar == 0)
		1053	vOut->widgetNE[0]->SetLimits(TGNumberFormat::kNELLimitMinMax, 0., newHardlimit);
		1054	}
		1055
		1056	// Set, get, home or reset the table position
		1057	void TGAppMainFrame::PositionSet(int opt)
		1058	{
		1059	char cmd[1024];
		1060
		1061	// Set the selected table position
		1062	if(opt == 0)
		1063	{
		1064	int positX, positY, positZ;
		1065
		1066	if(posUnits->widgetCB->GetSelected() == 0)
		1067	{
		1068	positX = xPos->widgetNE[0]->GetNumber();
		1069	positY = yPos->widgetNE[0]->GetNumber();
		1070	positZ = zPos->widgetNE[0]->GetNumber();
		1071	}
		1072	else if(posUnits->widgetCB->GetSelected() == 1)
		1073	{
		1074	positX = (int)xPos->widgetNE[0]->GetNumber()/lenconversion;
		1075	positY = (int)yPos->widgetNE[0]->GetNumber()/lenconversion;
		1076	positZ = (int)zPos->widgetNE[0]->GetNumber()/lenconversion;
		1077	}
		1078
		1079	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 1 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 1 -c m", rootdir, positX, rootdir);
		1080	#if WORKSTAT == 'I'
		1081	retTemp = system(cmd);
		1082	#else
		1083	printf("Cmd: %s\n",cmd);
		1084	#endif
		1085
		1086	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 2 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 2 -c m", rootdir, positY, rootdir);
		1087	#if WORKSTAT == 'I'
		1088	retTemp = system(cmd);
		1089	#else
		1090	printf("Cmd: %s\n",cmd);
		1091	#endif
		1092
		1093	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 3 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 3 -c m", rootdir, positZ, rootdir);
		1094	#if WORKSTAT == 'I'
		1095	retTemp = system(cmd);
		1096	#else
		1097	printf("Cmd: %s\n",cmd);
		1098	#endif
		1099	}
		1100	// Get current table position
		1101	else if(opt == 1)
		1102	{
		1103	fflush(stdout);
		1104
		1105	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 1 -p > %s/settings/curpos.txt", rootdir, rootdir); // X-axis
		1106	fflush(stdout);
		1107	#if WORKSTAT == 'I'
		1108	retTemp = system(cmd);
		1109	#else
		1110	printf("Cmd: %s\n",cmd);
		1111	#endif
		1112
		1113	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 2 -p >> %s/settings/curpos.txt", rootdir, rootdir); // Y-axis
		1114	fflush(stdout);
		1115	#if WORKSTAT == 'I'
		1116	retTemp = system(cmd);
		1117	#else
		1118	printf("Cmd: %s\n",cmd);
		1119	#endif
		1120
		1121	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 3 -p >> %s/settings/curpos.txt", rootdir, rootdir); // Z-axis
		1122	fflush(stdout);
		1123	#if WORKSTAT == 'I'
		1124	retTemp = system(cmd);
		1125	#else
		1126	printf("Cmd: %s\n",cmd);
		1127	#endif
		1128
		1129	#if WORKSTAT == 'I'
		1130	FILE* fpos;
		1131	int itemp;
		1132	sprintf(cmd, "%s/settings/curpos.txt", rootdir);
		1133	fpos = fopen(cmd, "r");
		1134
		1135	if(fpos != NULL)
		1136	{
		1137	if(posUnits->widgetCB->GetSelected() == 0)
		1138	{
		1139	retTemp = fscanf(fpos, "%d\n", &itemp);
		1140	xPos->widgetNE[0]->SetNumber(itemp);
		1141	retTemp = fscanf(fpos, "%d\n", &itemp);
		1142	yPos->widgetNE[0]->SetNumber(itemp);
		1143	retTemp = fscanf(fpos, "%d\n", &itemp);
		1144	zPos->widgetNE[0]->SetNumber(itemp);
		1145	}
		1146	else if(posUnits->widgetCB->GetSelected() == 1)
		1147	{
		1148	retTemp = fscanf(fpos, "%d\n", &itemp);
		1149	xPos->widgetNE[0]->SetNumber((double)itemp*lenconversion);
		1150	retTemp = fscanf(fpos, "%d\n", &itemp);
		1151	yPos->widgetNE[0]->SetNumber((double)itemp*lenconversion);
		1152	retTemp = fscanf(fpos, "%d\n", &itemp);
		1153	zPos->widgetNE[0]->SetNumber((double)itemp*lenconversion);
		1154	}
		1155	}
		1156
		1157	fclose(fpos);
		1158	#endif
		1159	}
		1160	// Home the table position
		1161	else if(opt == 2)
		1162	{
		1163	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 1 -h", rootdir); // X-axis
		1164	#if WORKSTAT == 'I'
		1165	retTemp = system(cmd);
		1166	#else
		1167	printf("Cmd: %s\n",cmd);
		1168	#endif
		1169
		1170	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 2 -h", rootdir); // Y-axis
		1171	#if WORKSTAT == 'I'
		1172	retTemp = system(cmd);
		1173	#else
		1174	printf("Cmd: %s\n",cmd);
		1175	#endif
		1176
		1177	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 3 -h", rootdir); // Z-axis
		1178	#if WORKSTAT == 'I'
		1179	retTemp = system(cmd);
		1180	#else
		1181	printf("Cmd: %s\n",cmd);
		1182	#endif
		1183	PositionSet(1);
		1184	}
		1185	// Reset the table position
		1186	else if(opt == 3)
		1187	{
		1188	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 1 -r && sudo %s/src/MIKRO/mikro_ctrl -n 1 -i 3 && sudo %s/src/MIKRO/mikro_ctrl -n 1 -h", rootdir, rootdir, rootdir); // X-axis
		1189	#if WORKSTAT == 'I'
		1190	printf("Positioning table reset, initialization and homing in progress. Please wait...\n");
		1191	retTemp = system(cmd);
		1192	#else
		1193	printf("Cmd: %s\n",cmd);
		1194	#endif
		1195
		1196	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 2 -r && sudo %s/src/MIKRO/mikro_ctrl -n 2 -i 3 && sudo %s/src/MIKRO/mikro_ctrl -n 2 -h", rootdir, rootdir, rootdir); // Y-axis
		1197	#if WORKSTAT == 'I'
		1198	retTemp = system(cmd);
		1199	#else
		1200	printf("Cmd: %s\n",cmd);
		1201	#endif
		1202
		1203	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 3 -r && sudo %s/src/MIKRO/mikro_ctrl -n 3 -i 3 && sudo %s/src/MIKRO/mikro_ctrl -n 3 -h", rootdir, rootdir, rootdir); // Z-axis
		1204	#if WORKSTAT == 'I'
		1205	retTemp = system(cmd);
		1206	printf("Positioning table reset, initialization and homing complete.\n");
		1207	#else
		1208	printf("Cmd: %s\n",cmd);
		1209	#endif
		1210	PositionSet(1);
		1211	}
172	f9daq	1212	// Abort any motion
		1213	else if(opt == 4)
		1214	{
		1215	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 1 -c ab", rootdir); // X-axis
		1216	#if WORKSTAT == 'I'
		1217	printf("Emergency stop of the current movement of all linear tables.\n");
		1218	retTemp = system(cmd);
		1219	#else
		1220	printf("Cmd: %s\n",cmd);
		1221	#endif
		1222
		1223	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 2 -c ab", rootdir); // Y-axis
		1224	#if WORKSTAT == 'I'
		1225	retTemp = system(cmd);
		1226	#else
		1227	printf("Cmd: %s\n",cmd);
		1228	#endif
		1229
		1230	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 3 -c ab", rootdir); // Z-axis
		1231	#if WORKSTAT == 'I'
		1232	retTemp = system(cmd);
		1233	#else
		1234	printf("Cmd: %s\n",cmd);
		1235	#endif
		1236	PositionSet(1);
		1237	}
146	f9daq	1238	}
		1239
		1240	// Set, get, home or reset the rotation platform
		1241	void TGAppMainFrame::RotationSet(int opt)
		1242	{
		1243	char cmd[1024];
		1244
		1245	// Set the selected rotation
		1246	if(opt == 0)
		1247	{
		1248	int positAlpha;
		1249
		1250	if(rotUnits->widgetCB->GetSelected() == 0)
		1251	positAlpha = rotPos->widgetNE[0]->GetNumber();
		1252	else if(rotUnits->widgetCB->GetSelected() == 1)
		1253	positAlpha = rotPos->widgetNE[0]->GetNumber()/rotconversion;
		1254
		1255	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 4 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 4 -c m", rootdir, positAlpha, rootdir);
		1256	#if WORKSTAT == 'I'
		1257	retTemp = system(cmd);
		1258	#else
		1259	printf("Cmd: %s\n",cmd);
		1260	#endif
		1261	}
		1262	// Get current rotation
		1263	else if(opt == 1)
		1264	{
		1265	fflush(stdout);
		1266
		1267	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 4 -p > %s/settings/currot.txt", rootdir, rootdir);
		1268	fflush(stdout);
		1269	#if WORKSTAT == 'I'
		1270	retTemp = system(cmd);
		1271	#else
		1272	printf("Cmd: %s\n",cmd);
		1273	#endif
		1274
		1275	#if WORKSTAT == 'I'
		1276	FILE* frot;
		1277	int itemp;
		1278	sprintf(cmd, "%s/settings/currot.txt", rootdir);
		1279	frot = fopen(cmd, "r");
		1280
		1281	if(frot != NULL)
		1282	{
		1283	retTemp = fscanf(frot, "%d\n", &itemp);
		1284	if(rotUnits->widgetCB->GetSelected() == 0)
		1285	rotPos->widgetNE[0]->SetNumber(itemp);
		1286	else if(rotUnits->widgetCB->GetSelected() == 1)
		1287	rotPos->widgetNE[0]->SetNumber((double)itemp*rotconversion);
		1288	}
		1289
		1290	fclose(frot);
		1291	#endif
		1292	}
		1293	// Home the rotation
		1294	else if(opt == 2)
		1295	{
		1296	// TODO: For now only set back to 0, not home!
		1297	// sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 4 -h", rootdir);
		1298	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 4 -v 0 -s la && %s/src/MIKRO/mikro_ctrl -n 4 -c m", rootdir, rootdir);
		1299	#if WORKSTAT == 'I'
		1300	retTemp = system(cmd);
		1301	#else
		1302	printf("Cmd: %s\n",cmd);
		1303	#endif
		1304	RotationSet(1);
		1305	}
		1306	// Reset the rotation
		1307	else if(opt == 3)
		1308	{
		1309	// TODO: For now only set back to 0, not home!
		1310	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 4 -r && sudo %s/src/MIKRO/mikro_ctrl -n 4 -i 2 && sudo %s/src/MIKRO/mikro_ctrl -n 4 -h", rootdir, rootdir, rootdir);
		1311	#if WORKSTAT == 'I'
		1312	printf("Rotation platform reset, initalization and homing in progress. Please wait...\n");
		1313	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 4 -v 0 -s la && %s/src/MIKRO/mikro_ctrl -n 4 -c m", rootdir, rootdir);
		1314	retTemp = system(cmd);
		1315	sleep(15); // wait for the motor to change position from wherever to 0
		1316	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 4 -r && sudo %s/src/MIKRO/mikro_ctrl -n 4 -i 2", rootdir, rootdir);
		1317	retTemp = system(cmd);
		1318	printf("Rotation platform reset, initalization and homing complete.\n");
		1319	#else
		1320	printf("Cmd: %s\n",cmd);
		1321	#endif
		1322	RotationSet(1);
		1323	}
172	f9daq	1324	// Abort any motion
		1325	else if(opt == 4)
		1326	{
		1327	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 4 -c ab", rootdir);
		1328	#if WORKSTAT == 'I'
		1329	printf("Emergency stop of the current movement of the rotation platform.\n");
		1330	retTemp = system(cmd);
		1331	#else
		1332	printf("Cmd: %s\n",cmd);
		1333	#endif
		1334	RotationSet(1);
		1335	}
146	f9daq	1336	}
		1337
		1338	// File browser for selecting the save file
		1339	void TGAppMainFrame::SaveFile()
		1340	{
172	f9daq	1341	// char *cTemp;
		1342
146	f9daq	1343	TGFileInfo file_info;
		1344	const char *filetypes[] = {"Histograms",histextall,0,0};
		1345	file_info.fFileTypes = filetypes;
172	f9daq	1346	// cTemp = new char[1024];
		1347	// sprintf(cTemp, "%s/results", rootdir);
		1348	// file_info.fIniDir = StrDup(cTemp);
		1349	file_info.fIniDir = StrDup(currentMeasDir);
146	f9daq	1350	new TGFileDialog(gClient->GetDefaultRoot(), fMain, kFDSave, &file_info);
172	f9daq	1351	// delete[] cTemp;
146	f9daq	1352
		1353	if(file_info.fFilename != NULL)
172	f9daq	1354	{
146	f9daq	1355	fileName->widgetTE->SetText(file_info.fFilename);
172	f9daq	1356	remove_from_last(file_info.fFilename, '/', currentMeasDir);
		1357	}
146	f9daq	1358	}
		1359
		1360	// Start the acquisition
		1361	void TGAppMainFrame::StartAcq()
		1362	{
173	f9daq	1363	// Save measurement settings any time we run a new measurement
		1364	SaveMeasSettings();
		1365
146	f9daq	1366	// Variable that will initialize camac only once (for scans)
		1367	int scanon = 0;
		1368
		1369	// Determine the type of measurement to perform
		1370	int vscan = 0, pscan = 0, zscan = 0, ascan = 0;
		1371	if(scansOn->widgetChBox[0]->IsDown()) vscan = 1;
		1372	if(scansOn->widgetChBox[1]->IsDown()) pscan = 1;
		1373	if(scansOn->widgetChBox[2]->IsDown()) zscan = 1;
		1374	if(scansOn->widgetChBox[3]->IsDown()) ascan = 1;
		1375
		1376	char cmd[256];
		1377	int i, j, k;
		1378	float progVal;
		1379	FILE *pfin;
		1380
		1381	// Variables for voltage scan
		1382	float currentVoltage, minVoltage, maxVoltage, stepVoltage;
		1383	int repetition;
		1384
		1385	// Variables for surface scan and Z axis scan
		1386	float minXpos, maxXpos, stepXpos;
		1387	float minYpos, maxYpos, stepYpos;
		1388	float minZpos, maxZpos, stepZpos;
		1389	int repetX, repetY, repetZ;
		1390
		1391	// Variables for angle scan
		1392	float currentAlpha, minAlpha, maxAlpha, stepAlpha;
		1393	int repetAlpha;
		1394
		1395	// Only voltage scan
		1396	if( (vscan == 1) && (pscan == 0) && (ascan == 0) )
		1397	{ // TODO - include possibility to make voltage and angle scan at same time
		1398	// If already started, stop the acquisition
		1399	if(acqStarted)
		1400	{
		1401	printf("Stopping current voltage scan...\n");
		1402	gROOT->SetInterrupt();
		1403	measProgress->widgetTB[0]->SetText("Start acquisition");
		1404	acqStarted = false;
		1405
		1406	// Write information to the finish_sig.txt value
		1407	sprintf(cmd, "%s/dbg/finish_sig.txt", rootdir);
		1408	pfin = fopen(cmd,"w");
		1409	fprintf(pfin, "%s: Voltage scan stopped.", timeStamp->widgetTE->GetText());
		1410	fclose(pfin);
		1411	}
		1412	// If stopped, start the acquisition
		1413	else if(!acqStarted)
		1414	{
		1415	printf("Running a voltage scan...\n");
		1416
		1417	// Check the steps
		1418	minVoltage = vOutStart->widgetNE[0]->GetNumber();
		1419	maxVoltage = vOutStop->widgetNE[0]->GetNumber();
		1420	stepVoltage = vOutStep->widgetNE[0]->GetNumber();
		1421
		1422	if(stepVoltage == 0.)
		1423	repetition = 1;
		1424	else
		1425	{
		1426	// Example: min = 40, max = 70, step = 5 (in increasing steps)
		1427	if( (maxVoltage > minVoltage) && (stepVoltage > 0) )
		1428	repetition = ((maxVoltage - minVoltage)/stepVoltage)+1;
		1429	// Example: min = 70, max = 40, step = -5 (in decreasing steps)
		1430	else if( (maxVoltage < minVoltage) && (stepVoltage < 0) )
		1431	repetition = ((minVoltage - maxVoltage)/stepVoltage)-1;
		1432	// Example: min = 70, max = 70 (no scan)
		1433	else if( maxVoltage == minVoltage )
		1434	repetition = 1;
		1435	// If step is not correctly set, stop the acqusition
		1436	else
		1437	{
		1438	// TODO
		1439	printf("Stopping current voltage scan...\n");
		1440	gROOT->SetInterrupt();
		1441	measProgress->widgetTB[0]->SetText("Start acquisition");
		1442	acqStarted = false;
		1443	repetition = 0;
		1444	}
		1445	}
		1446
		1447	if(DBGSIG) printf("StartAcq(): Voltage repetition (%lf,%lf,%lf) = %d\n", minVoltage, maxVoltage, stepVoltage, repetition);
		1448
		1449	i = 0;
		1450
		1451	// TODO - Setting button text and acqStarted do not work!
		1452	measProgress->widgetTB[0]->SetText("Stop acquisition");
		1453	acqStarted = true;
		1454	progVal = 0.00;
		1455	measProgress->widgetPB->SetPosition(progVal);
		1456	gVirtualX->Update(1);
		1457
		1458	clkt0 = clock();
		1459	timet0 = time(NULL);
		1460
		1461	while(1)
		1462	{
		1463	if( (repetition > 0) && (i == repetition) ) break;
		1464	else if( (repetition < 0) && (i == -repetition) ) break;
		1465	else if( repetition == 0 ) break;
		1466
		1467	progVal = (float)(100.00/abs(repetition))*i;
		1468	measProgress->widgetPB->SetPosition(progVal);
		1469
		1470	TimeEstimate(clkt0, timet0, progVal, cmd, singlewait*abs(repetition));
		1471	measProgress->widgetTE->SetText(cmd);
		1472
		1473	gVirtualX->Update(1);
		1474
		1475	fflush(stdout);
		1476	currentVoltage = minVoltage + stepVoltage*i;
		1477	sprintf(cmd, "%s/src/mpod/mpod_voltage.sh -o %d -v %f -s 1", rootdir, GetChannel(), currentVoltage);
		1478	#if WORKSTAT == 'I'
		1479	retTemp = system(cmd);
		1480	#else
		1481	printf("Cmd: %s\n",cmd);
		1482	#endif
		1483	fflush(stdout);
		1484
		1485	printf("Waiting for voltage change...\n");
		1486	sleep(singlewait);
		1487	vOut->widgetNE[0]->SetNumber(currentVoltage);
		1488	gVirtualX->Update(1);
		1489	printf("Continuing...\n");
		1490
		1491	// Here comes function to start histogramming <<<<<<<<<<<<<<<<<<<<<<<<
		1492	RunMeas((void*)0, i, scanon); // TODO
		1493	fflush(stdout);
		1494
		1495	i++;
		1496	}
		1497
		1498	// Set output back to off
		1499	fflush(stdout);
		1500	printf("Measurement finished, returning to starting voltage...\n");
		1501	sprintf(cmd, "%s/src/mpod/mpod_voltage.sh -o %d -v %f -s 1", rootdir, GetChannel(), minVoltage);
		1502	vOut->widgetNE[0]->SetNumber(minVoltage);
		1503	#if WORKSTAT == 'I'
		1504	retTemp = system(cmd);
		1505	#else
		1506	printf("Cmd: %s\n",cmd);
		1507	#endif
		1508	fflush(stdout);
		1509
		1510	progVal = 100.00;
		1511	measProgress->widgetPB->SetPosition(progVal);
		1512	printf("\n");
		1513
		1514	sprintf(cmd, "%s/dbg/finish_sig.txt", rootdir);
		1515	pfin = fopen(cmd,"w");
		1516	fprintf(pfin, "%s: Voltage scan finished.", timeStamp->widgetTE->GetText());
		1517	fclose(pfin);
		1518
		1519	measProgress->widgetTB[0]->SetText("Start acquisition");
		1520	acqStarted = false;
		1521	}
		1522	}
		1523	// Surface scan
		1524	else if( (pscan == 1) && (vscan == 0) && (ascan == 0) )
		1525	{
		1526	// If already started, stop the acquisition
		1527	if(acqStarted)
		1528	{
		1529	printf("Stopping current surface scan...\n");
		1530	gROOT->SetInterrupt();
		1531	measProgress->widgetTB[0]->SetText("Start acquisition");
		1532	acqStarted = false;
		1533
		1534	// Write information to the finish_sig.txt value
		1535	sprintf(cmd, "%s/dbg/finish_sig.txt", rootdir);
		1536	pfin = fopen(cmd,"w");
		1537	fprintf(pfin, "%s: Surface scan stopped.", timeStamp->widgetTE->GetText());
		1538	fclose(pfin);
		1539	}
		1540	// If stopped, start the acquisition
		1541	else if(!acqStarted)
		1542	{
		1543	printf("Running a surface scan...\n");
		1544
		1545	minXpos = xPosMin->widgetNE[0]->GetNumber();
		1546	maxXpos = xPosMax->widgetNE[0]->GetNumber();
		1547	stepXpos = xPosStep->widgetNE[0]->GetNumber();
		1548	minYpos = yPosMin->widgetNE[0]->GetNumber();
		1549	maxYpos = yPosMax->widgetNE[0]->GetNumber();
		1550	stepYpos = yPosStep->widgetNE[0]->GetNumber();
		1551	minZpos = zPosMin->widgetNE[0]->GetNumber();
		1552	maxZpos = zPosMax->widgetNE[0]->GetNumber();
		1553	stepZpos = zPosStep->widgetNE[0]->GetNumber();
		1554
		1555	// Setting repetition for Z axis scan
		1556	if(zscan == 1)
		1557	{
		1558	if(stepZpos == 0.)
		1559	repetZ = 1;
		1560	else
		1561	{
		1562	// Example: min = 40, max = 70, step = 5 (in increasing steps)
		1563	if( (maxZpos > minZpos) && (stepZpos > 0) )
		1564	repetZ = ((maxZpos - minZpos)/stepZpos)+1;
		1565	// Example: min = 70, max = 40, step = -5 (in decreasing steps)
		1566	else if( (maxZpos < minZpos) && (stepZpos < 0) )
		1567	repetZ = ((minZpos - maxZpos)/stepZpos)-1;
		1568	// Example: min = 70, max = 70 (no scan)
		1569	else if( maxZpos == minZpos )
		1570	repetZ = 1;
		1571	// If step is not correctly set, stop the acqusition
		1572	else
		1573	{
		1574	// TODO
		1575	printf("Stopping current surface scan (Z step error)...\n");
		1576	gROOT->SetInterrupt();
		1577	measProgress->widgetTB[0]->SetText("Start acquisition");
		1578	acqStarted = false;
		1579	repetZ = 0;
		1580	}
		1581	}
		1582	}
		1583	else
		1584	{
		1585	minZpos = zPos->widgetNE[0]->GetNumber();
		1586	repetZ = 1;
		1587	}
		1588
		1589	// Setting repetition for X axis
		1590	if(stepXpos == 0.)
		1591	repetX = 1;
		1592	else
		1593	{
		1594	// Example: min = 40, max = 70, step = 5 (in increasing steps)
		1595	if( (maxXpos > minXpos) && (stepXpos > 0) )
		1596	repetX = ((maxXpos - minXpos)/stepXpos)+1;
		1597	// Example: min = 70, max = 40, step = -5 (in decreasing steps)
		1598	else if( (maxXpos < minXpos) && (stepXpos < 0) )
		1599	repetX = ((minXpos - maxXpos)/stepXpos)-1;
		1600	// Example: min = 70, max = 70 (no scan)
		1601	else if( maxXpos == minXpos )
		1602	repetX = 1;
		1603	// If step is not correctly set, stop the acqusition
		1604	else
		1605	{
		1606	// TODO
		1607	printf("Stopping current surface scan (X step error)...\n");
		1608	gROOT->SetInterrupt();
		1609	measProgress->widgetTB[0]->SetText("Start acquisition");
		1610	acqStarted = false;
		1611	repetX = 0;
		1612	}
		1613	}
		1614	// Setting repetition for Y axis
		1615	if(stepYpos == 0.)
		1616	repetY = 1;
		1617	else
		1618	{
		1619	// Example: min = 40, max = 70, step = 5 (in increasing steps)
		1620	if( (maxYpos > minYpos) && (stepYpos > 0) )
		1621	repetY = ((maxYpos - minYpos)/stepYpos)+1;
		1622	// Example: min = 70, max = 40, step = -5 (in decreasing steps)
		1623	else if( (maxYpos < minYpos) && (stepYpos < 0) )
		1624	repetY = ((minYpos - maxYpos)/stepYpos)-1;
		1625	// Example: min = 70, max = 70 (no scan)
		1626	else if( maxYpos == minYpos )
		1627	repetY = 1;
		1628	// If step is not correctly set, stop the acqusition
		1629	else
		1630	{
		1631	// TODO
		1632	printf("Stopping current surface scan (Y step error)...\n");
		1633	gROOT->SetInterrupt();
		1634	measProgress->widgetTB[0]->SetText("Start acquisition");
		1635	acqStarted = false;
		1636	repetY = 0;
		1637	}
		1638	}
		1639
		1640	if(DBGSIG) printf("StartAcq(): X axis repetition (%lf,%lf,%lf) = %d\n", minXpos, maxXpos, stepXpos, repetX);
		1641	if(DBGSIG) printf("StartAcq(): Y axis repetition (%lf,%lf,%lf) = %d\n", minYpos, maxYpos, stepYpos, repetY);
		1642	if(DBGSIG) printf("StartAcq(): Z axis repetition (%lf,%lf,%lf) = %d\n", minZpos, maxZpos, stepZpos, repetZ);
		1643
		1644	i = 0; j = 0; k = 0;
		1645
		1646	// TODO - Setting button text and acqStarted do not work!
		1647	measProgress->widgetTB[0]->SetText("Stop acquisition");
		1648	acqStarted = true;
		1649	progVal = 0.00;
		1650	measProgress->widgetPB->SetPosition(progVal);
		1651	gVirtualX->Update(1);
		1652
172	f9daq	1653	int nrAverMeas = -1;
		1654
146	f9daq	1655	clkt0 = clock();
		1656	timet0 = time(NULL);
		1657
		1658	// Scan over Z axis
		1659	while(1)
		1660	{
		1661	if( (repetZ > 0) && (k == repetZ) ) break;
		1662	else if( (repetZ < 0) && (k == -repetZ) ) break;
		1663	else if( repetZ == 0 ) break;
		1664
		1665	fflush(stdout);
		1666	// Z-axis change
		1667	if( posUnits->widgetCB->GetSelected() == 0)
		1668	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 3 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 3 -c m", rootdir, (int)(minZpos + stepZpos*k), rootdir);
		1669	else if( posUnits->widgetCB->GetSelected() == 1)
		1670	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 3 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 3 -c m", rootdir, (int)((minZpos + stepZpos*k)/lenconversion), rootdir);
		1671	#if WORKSTAT == 'I'
		1672	retTemp = system(cmd);
		1673	#else
		1674	printf("Cmd: %s\n",cmd);
		1675	#endif
		1676	fflush(stdout);
		1677
		1678	printf("Next Z position...\n");
		1679	sleep(2*doublewait);
		1680	zPos->widgetNE[0]->SetNumber(minZpos + stepZpos*k);
		1681	fflush(stdout);
		1682
		1683	// Scan over Y axis
		1684	while(1)
		1685	{
		1686	if( (repetY > 0) && (j == repetY) ) break;
		1687	else if( (repetY < 0) && (j == -repetY) ) break;
		1688	else if( repetY == 0 ) break;
		1689
		1690	fflush(stdout);
		1691	// Y-axis change
		1692	if( posUnits->widgetCB->GetSelected() == 0)
		1693	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 2 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 2 -c m", rootdir, (int)(minYpos + stepYpos*j), rootdir);
		1694	else if( posUnits->widgetCB->GetSelected() == 1)
		1695	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 2 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 2 -c m", rootdir, (int)((minYpos + stepYpos*j)/lenconversion), rootdir);
		1696	#if WORKSTAT == 'I'
		1697	retTemp = system(cmd);
		1698	#else
		1699	printf("Cmd: %s\n",cmd);
		1700	#endif
		1701	fflush(stdout);
		1702
		1703	printf("Next Y position...\n");
		1704	sleep(2*doublewait);
		1705	yPos->widgetNE[0]->SetNumber(minYpos + stepYpos*j);
		1706	fflush(stdout);
		1707
		1708	// Scan over X axis
		1709	while(1)
		1710	{
		1711	if( (repetX > 0) && (i == repetX) ) break;
		1712	else if( (repetX < 0) && (i == -repetX) ) break;
		1713	else if( repetX == 0 ) break;
		1714
		1715	progVal = (float)(100.00/(abs(repetX)abs(repetY)abs(repetZ)))(kabs(repetX)abs(repetY) + jabs(repetX) + i);
		1716	measProgress->widgetPB->SetPosition(progVal);
		1717
172	f9daq	1718	// TimeEstimate(clkt0, timet0, progVal, cmd, doublewait((abs(repetX)+2)abs(repetY)+2)*abs(repetZ));
		1719	// measProgress->widgetTE->SetText(cmd);
146	f9daq	1720
		1721	gVirtualX->Update(1);
		1722
		1723	// X-axis change
		1724	if( posUnits->widgetCB->GetSelected() == 0)
		1725	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 1 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 1 -c m", rootdir, (int)(minXpos + stepXpos*i), rootdir);
		1726	else if( posUnits->widgetCB->GetSelected() == 1)
		1727	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 1 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 1 -c m", rootdir, (int)((minXpos + stepXpos*i)/lenconversion), rootdir);
		1728	#if WORKSTAT == 'I'
		1729	retTemp = system(cmd);
		1730	#else
		1731	printf("Cmd: %s\n",cmd);
		1732	#endif
		1733	fflush(stdout);
		1734
		1735	printf("Next X position...\n");
		1736	fflush(stdout);
172	f9daq	1737
		1738	TimeEstimateNew(nrAverMeas, clkt0, timet0, repetX, repetY, repetZ, doublewait, 2doublewait, 2doublewait, cmd);
		1739	measProgress->widgetTE->SetText(cmd);
146	f9daq	1740
		1741	printf("Waiting for position change...\n");
		1742	sleep(doublewait);
		1743	xPos->widgetNE[0]->SetNumber(minXpos + stepXpos*i);
		1744	printf("Continuing...\n");
		1745
		1746	// Here comes function to start histogramming <<<<<<<<<<<<<<<<<<<<<<<<
172	f9daq	1747	clkt0 = clock();
146	f9daq	1748	RunMeas((void)0, (jrepetX + i), scanon);
172	f9daq	1749	nrAverMeas++;
146	f9daq	1750	fflush(stdout);
		1751
		1752	i++;
		1753	}
		1754
		1755	i = 0;
		1756	printf("\n");
		1757
		1758	j++;
		1759	}
		1760
		1761	j = 0;
		1762
		1763	k++;
		1764	}
		1765	printf("Time = %d\n", (int)time(NULL));
		1766
		1767	fflush(stdout);
		1768	printf("Measurement finished, returning to starting position...\n");
		1769	// X-axis return
		1770	if( posUnits->widgetCB->GetSelected() == 0)
		1771	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 1 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 1 -c m", rootdir, (int)minXpos, rootdir);
		1772	else if( posUnits->widgetCB->GetSelected() == 1)
		1773	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 1 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 1 -c m", rootdir, (int)(minXpos/lenconversion), rootdir);
		1774	#if WORKSTAT == 'I'
		1775	retTemp = system(cmd);
		1776	#else
		1777	printf("Cmd: %s\n",cmd);
		1778	#endif
		1779	fflush(stdout);
		1780
		1781	// Y-axis return
		1782	if( posUnits->widgetCB->GetSelected() == 0)
		1783	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 2 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 2 -c m", rootdir, (int)minYpos, rootdir);
		1784	else if( posUnits->widgetCB->GetSelected() == 1)
		1785	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 2 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 2 -c m", rootdir, (int)(minYpos/lenconversion), rootdir);
		1786	#if WORKSTAT == 'I'
		1787	retTemp = system(cmd);
		1788	#else
		1789	printf("Cmd: %s\n",cmd);
		1790	#endif
		1791
		1792	// Z-axis return
		1793	if( posUnits->widgetCB->GetSelected() == 0)
		1794	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 3 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 3 -c m", rootdir, (int)minZpos, rootdir);
		1795	else if( posUnits->widgetCB->GetSelected() == 1)
		1796	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 3 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 3 -c m", rootdir, (int)(minZpos/lenconversion), rootdir);
		1797	#if WORKSTAT == 'I'
		1798	retTemp = system(cmd);
		1799	#else
		1800	printf("Cmd: %s\n",cmd);
		1801	#endif
		1802	xPos->widgetNE[0]->SetNumber(minXpos);
		1803	yPos->widgetNE[0]->SetNumber(minYpos);
		1804	zPos->widgetNE[0]->SetNumber(minZpos);
		1805
		1806	progVal = 100.00;
		1807	measProgress->widgetPB->SetPosition(progVal);
		1808	printf("\n");
		1809
		1810	// Write information to the finish_sig.txt value
		1811	sprintf(cmd, "%s/dbg/finish_sig.txt", rootdir);
		1812	pfin = fopen(cmd,"w");
		1813	fprintf(pfin, "%s: Surface scan finished.", timeStamp->widgetTE->GetText());
		1814	fclose(pfin);
		1815
		1816	measProgress->widgetTB[0]->SetText("Start acquisition");
		1817	acqStarted = false;
		1818	}
		1819	}
		1820	// Only angle scan
		1821	if( (ascan == 1) && (pscan == 0) && (vscan == 0) )
		1822	{
		1823	// If already started, stop the acquisition
		1824	if(acqStarted)
		1825	{
		1826	printf("Stopping current angle scan...\n");
		1827	gROOT->SetInterrupt();
		1828	measProgress->widgetTB[0]->SetText("Start acquisition");
		1829	acqStarted = false;
		1830
		1831	// Write information to the finish_sig.txt value
		1832	sprintf(cmd, "%s/dbg/finish_sig.txt", rootdir);
		1833	pfin = fopen(cmd,"w");
		1834	fprintf(pfin, "%s: Angle scan stopped.", timeStamp->widgetTE->GetText());
		1835	fclose(pfin);
		1836	}
		1837	// If stopped, start the acquisition
		1838	else if(!acqStarted)
		1839	{
		1840	printf("Running an incidence angle scan...\n");
		1841
		1842	// Check the steps
		1843	minAlpha = rotPosMin->widgetNE[0]->GetNumber();
		1844	maxAlpha = rotPosMax->widgetNE[0]->GetNumber();
		1845	stepAlpha = rotPosStep->widgetNE[0]->GetNumber();
		1846
		1847	if(stepAlpha == 0.)
		1848	repetAlpha = 1;
		1849	else
		1850	{
		1851	// Example: min = 40, max = 70, step = 5 (in increasing steps)
		1852	if( (maxAlpha > minAlpha) && (stepAlpha > 0) )
		1853	repetAlpha = ((maxAlpha - minAlpha)/stepAlpha)+1;
		1854	// Example: min = 70, max = 40, step = -5 (in decreasing steps)
		1855	else if( (maxAlpha < minAlpha) && (stepAlpha < 0) )
		1856	repetAlpha = ((minAlpha - maxAlpha)/stepAlpha)-1;
		1857	// Example: min = 70, max = 70 (no scan)
		1858	else if( maxAlpha == minAlpha )
		1859	repetAlpha = 1;
		1860	// If step is not correctly set, stop the acqusition
		1861	else
		1862	{
		1863	// TODO
		1864	printf("Stopping current incidence angle scan...\n");
		1865	gROOT->SetInterrupt();
		1866	measProgress->widgetTB[0]->SetText("Start acquisition");
		1867	acqStarted = false;
		1868	repetAlpha = 0;
		1869	}
		1870	}
		1871
		1872	if(DBGSIG) printf("StartAcq(): Angle repetition (%lf,%lf,%lf) = %d\n", minAlpha, maxAlpha, stepAlpha, repetAlpha);
		1873
		1874	int angleWait = TMath::Ceil(abs(rotPos->widgetNE[0]->GetNumber()-minAlpha)*15/(rotPos->widgetNE[0]->GetNumMax()));
		1875	if(rotUnits->widgetCB->GetSelected() == 1)
		1876	{
		1877	minAlpha = minAlpha/rotconversion;
		1878	maxAlpha = maxAlpha/rotconversion;
		1879	stepAlpha = stepAlpha/rotconversion;
		1880	}
		1881
		1882	i = 0;
		1883
		1884	// TODO - Setting button text and acqStarted do not work!
		1885	measProgress->widgetTB[0]->SetText("Stop acquisition");
		1886	acqStarted = true;
		1887	progVal = 0.00;
		1888	measProgress->widgetPB->SetPosition(progVal);
		1889	gVirtualX->Update(1);
		1890
		1891	clkt0 = clock();
		1892	timet0 = time(NULL);
		1893
		1894	// Setting angle to initial position
		1895	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 4 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 4 -c m", rootdir, (int)minAlpha, rootdir);
		1896	if(rotUnits->widgetCB->GetSelected() == 0)
		1897	rotPos->widgetNE[0]->SetNumber(minAlpha);
		1898	else if(rotUnits->widgetCB->GetSelected() == 1)
		1899	rotPos->widgetNE[0]->SetNumber(minAlpha*rotconversion);
		1900	#if WORKSTAT == 'I'
		1901	retTemp = system(cmd);
		1902	#else
		1903	printf("Cmd: %s\n",cmd);
		1904	#endif
		1905	fflush(stdout);
		1906
		1907	printf("Waiting for %ds for rotation platform to move into starting position...\n", angleWait);
		1908	sleep(angleWait);
		1909
		1910	while(1)
		1911	{
		1912	if( (repetAlpha > 0) && (i == repetAlpha) ) break;
		1913	else if( (repetAlpha < 0) && (i == -repetAlpha) ) break;
		1914	else if( repetAlpha == 0 ) break;
		1915
		1916	progVal = (float)(100.00/abs(repetAlpha))*i;
		1917	measProgress->widgetPB->SetPosition(progVal);
		1918
		1919	TimeEstimate(clkt0, timet0, progVal, cmd, singlewait*abs(repetAlpha));
		1920	measProgress->widgetTE->SetText(cmd);
		1921
		1922	gVirtualX->Update(1);
		1923
		1924	fflush(stdout);
		1925	currentAlpha = minAlpha + stepAlpha*i;
		1926	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 4 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 4 -c m", rootdir, (int)currentAlpha, rootdir);
		1927	#if WORKSTAT == 'I'
		1928	retTemp = system(cmd);
		1929	#else
		1930	printf("Cmd: %s\n",cmd);
		1931	#endif
		1932	fflush(stdout);
		1933
		1934	printf("Waiting for angle change...\n");
		1935	sleep(singlewait);
		1936	if(rotUnits->widgetCB->GetSelected() == 0)
		1937	rotPos->widgetNE[0]->SetNumber(currentAlpha);
		1938	else if(rotUnits->widgetCB->GetSelected() == 1)
		1939	rotPos->widgetNE[0]->SetNumber(currentAlpha*rotconversion);
		1940	gVirtualX->Update(1);
		1941	printf("Continuing...\n");
		1942
		1943	// Here comes function to start histogramming <<<<<<<<<<<<<<<<<<<<<<<<
		1944	RunMeas((void*)0, i, scanon); // TODO
		1945	fflush(stdout);
		1946
		1947	i++;
		1948	}
		1949
		1950	// Set angle back to original position
		1951	fflush(stdout);
		1952	printf("Measurement finished, returning to starting incidence angle...\n");
		1953	sprintf(cmd, "sudo %s/src/MIKRO/mikro_ctrl -n 4 -v %d -s la && %s/src/MIKRO/mikro_ctrl -n 4 -c m", rootdir, (int)minAlpha, rootdir);
		1954	if(rotUnits->widgetCB->GetSelected() == 0)
		1955	rotPos->widgetNE[0]->SetNumber(minAlpha);
		1956	else if(rotUnits->widgetCB->GetSelected() == 1)
		1957	rotPos->widgetNE[0]->SetNumber(minAlpha*rotconversion);
		1958	#if WORKSTAT == 'I'
		1959	retTemp = system(cmd);
		1960	#else
		1961	printf("Cmd: %s\n",cmd);
		1962	#endif
		1963	fflush(stdout);
		1964
		1965	progVal = 100.00;
		1966	measProgress->widgetPB->SetPosition(progVal);
		1967	printf("\n");
		1968
		1969	sprintf(cmd, "%s/dbg/finish_sig.txt", rootdir);
		1970	pfin = fopen(cmd,"w");
		1971	fprintf(pfin, "%s: Incidence angle scan finished.", timeStamp->widgetTE->GetText());
		1972	fclose(pfin);
		1973
		1974	measProgress->widgetTB[0]->SetText("Start acquisition");
		1975	acqStarted = false;
		1976	}
		1977	}
		1978	// Normal single measurement
		1979	else if( (vscan == 0) && (pscan == 0) && (ascan == 0) )
		1980	{
		1981	// Set the start button to stop and enable stopping of measurement
		1982	if(acqStarted)
		1983	{
		1984	printf("Stopping current single scan...\n");
		1985	gROOT->SetInterrupt();
		1986	measProgress->widgetTB[0]->SetText("Start acquisition");
		1987	acqStarted = false;
		1988	}
		1989	else if(!acqStarted)
		1990	{
		1991	measProgress->widgetTB[0]->SetText("Stop acquisition");
		1992	acqStarted = true;
		1993
		1994	printf("Running a single scan...\n");
		1995	clkt0 = clock();
		1996	timet0 = time(NULL);
		1997	RunMeas((void*)0, 0, scanon);
		1998	printf("Measurement finished...\n");
		1999	printf("\n");
		2000
		2001	measProgress->widgetTB[0]->SetText("Start acquisition");
		2002	acqStarted = false;
		2003	}
		2004	}
		2005	}
		2006
		2007	// Main measurement window connections ----------------------
		2008
		2009	// Histogram file selection pane connections ----------------
		2010
		2011	// File browser for opening histograms
		2012	void TGAppMainFrame::SelectDirectory()
		2013	{
		2014	int i = fileList->GetNumberOfEntries();
167	f9daq	2015	// char *cTemp;
146	f9daq	2016
		2017	TGFileInfo file_info;
		2018	const char *filetypes[] = {"Histograms",histextall,0,0};
		2019	file_info.fFileTypes = filetypes;
167	f9daq	2020	// cTemp = new char[1024];
		2021	// sprintf(cTemp, "%s/results", rootdir);
		2022	// file_info.fIniDir = StrDup(cTemp);
172	f9daq	2023	file_info.fIniDir = StrDup(currentAnalDir);
146	f9daq	2024	file_info.fMultipleSelection = kTRUE;
		2025	new TGFileDialog(gClient->GetDefaultRoot(), fMain, kFDOpen, &file_info);
167	f9daq	2026	// delete[] cTemp;
146	f9daq	2027
		2028	TList *files = file_info.fFileNamesList;
		2029	if(files)
		2030	{
		2031	TSystemFile *file;
		2032	TString fname;
		2033	TIter next(files);
		2034	while(file=(TSystemFile*)next())
		2035	{
		2036	fname = file->GetName();
172	f9daq	2037	remove_from_last((char*)fname.Data(), '/', currentAnalDir);
146	f9daq	2038	fileList->AddEntry(fname.Data(), i);
		2039	i++;
		2040	}
		2041	}
		2042	fileList->Layout();
		2043	}
		2044
		2045	// Toggle multiple selection in filelist or delete all entries
		2046	void TGAppMainFrame::ListMultiSelect(int opt)
		2047	{
		2048	// Enable multiselect
		2049	if(opt == 0)
		2050	{
		2051	fileList->SetMultipleSelections((multiSelect->widgetChBox[0]->IsOn()));
		2052
		2053	if(multiSelect->widgetChBox[1]->IsDown())
		2054	multiSelect->widgetChBox[1]->SetState(kButtonUp);
		2055	}
		2056	else if(opt == 1)
		2057	{
		2058	if(multiSelect->widgetChBox[1]->IsDown())
		2059	{
		2060	multiSelect->widgetChBox[0]->SetState(kButtonDown);
		2061	fileList->SetMultipleSelections((multiSelect->widgetChBox[0]->IsOn()));
		2062	for(int i = 0; i < fileList->GetNumberOfEntries(); i++)
		2063	fileList->Select(i,kTRUE);
		2064	}
		2065	else if(!multiSelect->widgetChBox[1]->IsDown())
		2066	{
		2067	multiSelect->widgetChBox[0]->SetState(kButtonUp);
		2068	fileList->SetMultipleSelections((multiSelect->widgetChBox[0]->IsOn()));
		2069	for(int i = 0; i < fileList->GetNumberOfEntries(); i++)
		2070	fileList->Select(i,kFALSE);
		2071	}
		2072	}
		2073	}
		2074
		2075	// Navigation buttons for the filelist (<<, >>) and double click
		2076	void TGAppMainFrame::FileListNavigation(int opt)
		2077	{
		2078	unsigned int nrfiles = fileList->GetNumberOfEntries();
		2079	int curSel;
		2080	TList *files;
		2081	if( nrfiles > 0 )
		2082	{
		2083	if(opt < -1)
		2084	{
		2085	// turn off multiple selection and select first file on list
		2086	if(multiSelect->widgetChBox[0]->IsOn())
		2087	{
		2088	fileList->SetMultipleSelections(kFALSE);
		2089	multiSelect->widgetChBox[0]->SetState(kButtonUp);
		2090	multiSelect->widgetChBox[1]->SetState(kButtonUp);
		2091
		2092	fileList->Select(0,kTRUE);
		2093	}
		2094	else
		2095	{
		2096	// if nothing is selected, curSel will be -1
		2097	curSel = fileList->GetSelected();
		2098	// go to next file on list
		2099	if(opt == -3)
		2100	{
		2101	if( (curSel == (int)(nrfiles-1)) \|\| (curSel == -1) )
		2102	fileList->Select(0);
		2103	else
		2104	fileList->Select(curSel+1);
		2105	}
		2106	// go to previous file on list
		2107	else if(opt == -2)
		2108	{
		2109	if( (curSel == 0) \|\| (curSel == -1) )
		2110	fileList->Select(nrfiles-1);
		2111	else
		2112	fileList->Select(curSel-1);
		2113	}
		2114	}
		2115	}
		2116	}
		2117
		2118	UpdateHistogram(0);
		2119	}
		2120
		2121	// Open the header edit window when pressing on editHeader button
		2122	void TGAppMainFrame::HeaderEdit()
		2123	{
		2124	bool createTab = true;
		2125	int tabid = -1;
		2126
		2127	for(int i = 0; i < fTab->GetNumberOfTabs(); i++)
		2128	{
		2129	if(strcmp("File header editor", fTab->GetTabTab(i)->GetString() ) == 0)
		2130	{
		2131	createTab = false;
		2132	tabid = i;
		2133	}
		2134
		2135	if(DBGSIG > 1) printf("HeaderEdit(): Name of tab = %s\n", fTab->GetTabTab(i)->GetString() );
		2136	}
		2137
		2138	unsigned int nrfiles = fileList->GetNumberOfEntries();
		2139	if(nrfiles > 0)
		2140	HeaderEditTab(fTab, createTab, &tabid);
		2141	}
		2142
		2143	// Clear the histogram file selection list and dark run analysis selection
		2144	void TGAppMainFrame::ClearHistogramList()
		2145	{
		2146	fileList->RemoveAll();
		2147	darkRun->widgetTE->Clear();
		2148	}
		2149
		2150	// Histogram file selection pane connections ----------------
		2151
		2152	// Histogram controls pane connections ----------------------
		2153
		2154	// Readjust the histogram range after changing ADC, TDC, Y range or logarithmic scale (opt: 0 = normal redraw, 1 = export, 2 = redraw when changing which channel to display)
		2155	void TGAppMainFrame::UpdateHistogram(int opt)
		2156	{
		2157	if(DBGSIG > 1)
		2158	{
		2159	printf("UpdateHistogram(): Clearing the TList\n");
		2160	gDirectory->GetList()->Delete();
		2161	gObjectTable->Print();
		2162	}
		2163
		2164	// Do not do normal histogram update if we have multiple files selected
		2165	if( (opt == 0) && (multiSelect->widgetChBox[0]->IsDown()) )
		2166	{
		2167	printf("UpdateHistogram(): To preview changes done to a histogram, please deselect the \"Multiple files select\" option.");
		2168	return;
		2169	}
		2170
		2171	// Do not update histogram if we are on the same channel
		2172	if( ((opt == 2) && (selChannel != (int)selectCh->widgetNE[0]->GetNumber())) \|\| (opt < 2) )
		2173	{
		2174	unsigned int nrfiles = fileList->GetNumberOfEntries();
		2175	TCanvas *gCanvas;
		2176	char exportname[512];
		2177	char cTemp[512];
		2178
		2179	if(opt == 1)
		2180	gCanvas = analysisCanvas->GetCanvas();
		2181
		2182	if(nrfiles > 0)
		2183	{
		2184	TList *files;
		2185	files = new TList();
		2186	fileList->GetSelectedEntries(files);
		2187
		2188	if(files)
		2189	{
		2190	for(int i = 0; i < (int)nrfiles; i++)
		2191	{
		2192	if(files->At(i))
		2193	{
		2194	if(DBGSIG)
		2195	printf("UpdateHistogram(): Filename: %s\n", files->At(i)->GetTitle());
		2196	if(opt == 1)
		2197	remove_ext((char*)files->At(i)->GetTitle(), cTemp);
		2198	if( fMenuHisttype->IsEntryChecked(M_ANALYSIS_HISTTYPE_1DADC) )
		2199	{
		2200	sprintf(exportname, "%s_adc%d.pdf", cTemp, (int)selectCh->widgetNE[0]->GetNumber());
		2201	DisplayHistogram( (char*)(files->At(i)->GetTitle()), 0, opt);
		2202	}
		2203	else if( fMenuHisttype->IsEntryChecked(M_ANALYSIS_HISTTYPE_1DTDC) )
		2204	{
		2205	sprintf(exportname, "%s_tdc%d.pdf", cTemp, (int)selectCh->widgetNE[0]->GetNumber());
		2206	DisplayHistogram( (char*)(files->At(i)->GetTitle()), 1, opt);
		2207	}
		2208	else if( fMenuHisttype->IsEntryChecked(M_ANALYSIS_HISTTYPE_2D) )
		2209	{
		2210	sprintf(exportname, "%s_adctdc%d.pdf", cTemp, (int)selectCh->widgetNE[0]->GetNumber());
		2211	DisplayHistogram( (char*)(files->At(i)->GetTitle()), 2, opt);
		2212	}
		2213
		2214	if(opt == 1)
		2215	{
		2216	gCanvas->SaveAs(exportname);
		2217	delete inroot;
		2218	}
		2219	}
		2220	}
		2221	}
		2222	}
		2223	selChannel = selectCh->widgetNE[0]->GetNumber();
		2224	}
		2225
		2226	if(DBGSIG > 1)
		2227	{
		2228	printf("UpdateHistogram(): After drawing histograms (connections)\n");
		2229	gObjectTable->Print();
		2230	}
		2231	}
		2232
		2233	// Options for histogram (logarithmic scale, clean plots)
		2234	void TGAppMainFrame::HistogramOptions(int opt)
		2235	{
		2236	// Logarithmic scale
		2237	if(opt == 0)
		2238	UpdateHistogram(0);
		2239	// Clean plots
		2240	else if(opt == 1)
		2241	{
		2242	cleanPlots = histOpt->widgetChBox[1]->IsDown();
		2243	UpdateHistogram(0);
		2244	}
		2245	}
		2246
		2247	// Changing the histogram type to display
		2248	void TGAppMainFrame::ChangeHisttype(int type)
		2249	{
		2250	TGTextButton *pressedB = new TGTextButton();
		2251	int menuID = 0;
		2252	unsigned int nrfiles = fileList->GetNumberOfEntries();
		2253
		2254	// ADC histogram
		2255	if(type == 0)
		2256	{
		2257	pressedB = plotType->widgetTB[0];
		2258	menuID = M_ANALYSIS_HISTTYPE_1DADC;
		2259
		2260	plotType->widgetTB[1]->SetDown(kFALSE);
		2261	plotType->widgetTB[2]->SetDown(kFALSE);
		2262	fMenuHisttype->UnCheckEntry(M_ANALYSIS_HISTTYPE_1DTDC);
		2263	fMenuHisttype->UnCheckEntry(M_ANALYSIS_HISTTYPE_2D);
		2264	}
		2265	// TDC histogram
		2266	else if(type == 1)
		2267	{
		2268	pressedB = plotType->widgetTB[1];
		2269	menuID = M_ANALYSIS_HISTTYPE_1DTDC;
		2270
		2271	plotType->widgetTB[0]->SetDown(kFALSE);
		2272	plotType->widgetTB[2]->SetDown(kFALSE);
		2273	fMenuHisttype->UnCheckEntry(M_ANALYSIS_HISTTYPE_1DADC);
		2274	fMenuHisttype->UnCheckEntry(M_ANALYSIS_HISTTYPE_2D);
		2275	}
		2276	// ADC vs. TDC histogram
		2277	else if(type == 2)
		2278	{
		2279	pressedB = plotType->widgetTB[2];
		2280	menuID = M_ANALYSIS_HISTTYPE_2D;
		2281
		2282	plotType->widgetTB[0]->SetDown(kFALSE);
		2283	plotType->widgetTB[1]->SetDown(kFALSE);
		2284	fMenuHisttype->UnCheckEntry(M_ANALYSIS_HISTTYPE_1DADC);
		2285	fMenuHisttype->UnCheckEntry(M_ANALYSIS_HISTTYPE_1DTDC);
		2286	}
		2287
		2288	if( fMenuHisttype->IsEntryChecked(menuID) )
		2289	{
		2290	pressedB->SetDown(kFALSE);
		2291	fMenuHisttype->UnCheckEntry(menuID);
		2292	}
		2293	else if( !fMenuHisttype->IsEntryChecked(menuID) )
		2294	{
		2295	pressedB->SetDown(kTRUE);
		2296	fMenuHisttype->CheckEntry(menuID);
		2297	}
		2298
		2299	UpdateHistogram(0);
		2300	}
		2301
		2302	// Histogram controls pane connections ----------------------

Subversion Repositories f9daq

(root)//lab/sipmscan/trunk/src/connections.cpp – Rev 173