WebSVN – f9daq – Blame – //cvi/instr/CAENV1718/CAENVMElib.h

Rev	Author	Line No.	Line
77	f9daq	1	/*!
		2	-----------------------------------------------------------------------------
		3
		4	--- CAEN SpA - Computing Systems Division ---
		5
		6	-----------------------------------------------------------------------------
		7
		8	CAENVMElib.h
		9
		10	-----------------------------------------------------------------------------
		11
		12	Created: March 2004
		13
		14	-----------------------------------------------------------------------------
		15	*/
		16	#ifndef __CAENVMELIB_H
		17	#define __CAENVMELIB_H
		18
		19	#include <stdio.h>
		20	// Rev. 2.5
		21	#ifdef LINUX
		22	#include <stdint.h>
		23	#endif
		24	#include <stdlib.h>
		25	#ifndef _CVI_
		26	#include <malloc.h>
		27	#endif
		28	#include "CAENVMEoslib.h"
		29	#include "CAENVMEtypes.h"
		30
		31
		32
		33	#ifdef __cplusplus
		34	extern "C" {
		35	#endif // __cplusplus
		36	/*
		37	CAENVME_DecodeError
		38	-----------------------------------------------------------------------------
		39	Parameters:
		40	[in] Code : The error code to decode.
		41	-----------------------------------------------------------------------------
		42	Returns:
		43	An string describing the error condition.
		44	-----------------------------------------------------------------------------
		45	Description:
		46	Decode the error.
		47	*/
		48	const char *
		49	#ifdef WIN32
		50	__stdcall
		51	#endif
		52	CAENVME_DecodeError(CVErrorCodes Code);
		53
		54	/*
		55	CAENVME_API CAENVME_SWRelease
		56	-----------------------------------------------------------------------------
		57	Parameters:
		58	[out] SwRel : Returns the software release of the library.
		59	-----------------------------------------------------------------------------
		60	Returns:
		61	An error code about the execution of the function.
		62	-----------------------------------------------------------------------------
		63	Description:
		64	Permits to read the software release of the library.
		65	*/
		66	CAENVME_API
		67	CAENVME_SWRelease(char *SwRel);
		68
		69	/*
		70	CAENVME_BoardFWRelease.
		71	-----------------------------------------------------------------------------
		72	Parameters:
		73	[in] Handle : The handle that identifies the device.
		74	[out] FWRel : Returns the firmware release of the device.
		75	-----------------------------------------------------------------------------
		76	Returns:
		77	An error code about the execution of the function.
		78	-----------------------------------------------------------------------------
		79	Description:
		80	Permits to read the firmware release loaded into the device.
		81	*/
		82	CAENVME_API
		83	CAENVME_BoardFWRelease(int32_t Handle, char *FWRel);
		84
		85	/*
		86	CAENVME_DriverRelease.
		87	-----------------------------------------------------------------------------
		88	Parameters:
		89	[in] Handle : The handle that identifies the device.
		90	[out] Rel : Returns the software release of the device driver
		91	-----------------------------------------------------------------------------
		92	Returns:
		93	An error code about the execution of the function.
		94	-----------------------------------------------------------------------------
		95	Description:
		96	Permits to read the software release of the device driver.
		97	*/
		98	CAENVME_API
		99	CAENVME_DriverRelease(int32_t Handle, char *Rel);
		100
		101	/*
		102	CAENVME_DeviceReset
		103	-----------------------------------------------------------------------------
		104	Parameters:
		105	[in] Handle : The handle that identifies the device.
		106	-----------------------------------------------------------------------------
		107	Returns:
		108	An error code about the execution of the function.
		109	-----------------------------------------------------------------------------
		110	Description:
		111	Permits to reset the device.
		112	Implemented for A2818, A2719, V2718 on Linux platform only
		113	*/
		114	CAENVME_API
		115	CAENVME_DeviceReset(int32_t dev);
		116
		117
		118	/*
		119	CAENVME_Init
		120	-----------------------------------------------------------------------------
		121	Parameters:
		122	[in] BdType : The model of the bridge (V1718/V2718).
		123	[in] Link : The link number (don't care for V1718).
		124	[in] BdNum : The board number in the link.
		125	[out] Handle : The handle that identifies the device.
		126	-----------------------------------------------------------------------------
		127	Returns:
		128	An error code about the execution of the function.
		129	-----------------------------------------------------------------------------
		130	Description:
		131	The function generates an opaque handle to identify a module
		132	attached to the PC. In the case of V1718 bridge it must be
		133	specified only the module index (BdNum) because the link is USB.
		134	In the case of V2718 it must be specified also the link because
		135	you can have some A2818 optical link inside the PC.
		136	*/
		137	CAENVME_API
		138	CAENVME_Init(CVBoardTypes BdType, short Link, short BdNum, int32_t *Handle);
		139
		140	/*
		141	CAENVME_End
		142	-----------------------------------------------------------------------------
		143	Parameters:
		144	[in] Handle : The handle that identifies the device.
		145	-----------------------------------------------------------------------------
		146	Returns:
		147	An error code about the execution of the function.
		148	-----------------------------------------------------------------------------
		149	Description:
		150	Notifies the library the end of work and free the allocated
		151	resources.
		152	*/
		153	CAENVME_API
		154	CAENVME_End(int32_t Handle);
		155
		156	/*
		157	CAENVME_ReadCycle
		158	-----------------------------------------------------------------------------
		159	Parameters:
		160	[in] Handle : The handle that identifies the device.
		161	[in] Address : The VME bus address.
		162	[out] Data : The data read from the VME bus.
		163	[in] AM : The address modifier (see CVAddressModifier enum).
		164	[in] DW : The data width.(see CVDataWidth enum).
		165	-----------------------------------------------------------------------------
		166	Returns:
		167	An error code about the execution of the function.
		168	-----------------------------------------------------------------------------
		169	Description:
		170	The function performs a single VME read cycle.
		171	*/
		172	CAENVME_API
		173	CAENVME_ReadCycle(int32_t Handle, uint32_t Address, void *Data,
		174	CVAddressModifier AM, CVDataWidth DW);
		175
		176	/*
		177	CAENVME_RMWCycle
		178	-----------------------------------------------------------------------------
		179	Parameters:
		180	[in] Handle : The handle that identifies the device.
		181	[in] Address: The VME bus address.
		182	[in/out] Data : The data read and then written to the VME bus.
		183	[in] AM : The address modifier (see CVAddressModifier enum).
		184	[in] DW : The data width.(see CVDataWidth enum).
		185	-----------------------------------------------------------------------------
		186	Returns:
		187	An error code about the execution of the function.
		188	-----------------------------------------------------------------------------
		189	Description:
		190	The function performs a Read-Modify-Write cycle. The Data parameter
		191	is bidirectional: it is used to write the value to the VME bus and to
		192	return the value read.
		193	*/
		194	CAENVME_API
		195	CAENVME_RMWCycle(int32_t Handle, uint32_t Address, void *Data,
		196	CVAddressModifier AM, CVDataWidth DW);
		197
		198	/*
		199	CAENVME_WriteCycle
		200	-----------------------------------------------------------------------------
		201	Parameters:
		202	[in] Handle : The handle that identifies the device.
		203	[in] Address : The VME bus address.
		204	[in] Data : The data written to the VME bus.
		205	[in] AM : The address modifier (see CVAddressModifier enum).
		206	[in] DW : The data width.(see CVDataWidth enum).
		207	-----------------------------------------------------------------------------
		208	Returns:
		209	An error code about the execution of the function.
		210	-----------------------------------------------------------------------------
		211	Description:
		212	The function performs a single VME write cycle.
		213	*/
		214	CAENVME_API
		215	CAENVME_WriteCycle(int32_t Handle, uint32_t Address, void *Data,
		216	CVAddressModifier AM, CVDataWidth DW);
		217
		218	/*
		219	CAENVME_MultiRead (Ver. 2.2)
		220	-----------------------------------------------------------------------------
		221	Parameters:
		222	[in] Handle : The handle that identifies the device.
		223	[in] Addrs : The VME bus addresses.
		224	[out] Buffer : The data read from the VME bus.
		225	[in] NCycles : The number of read cycles to perform.
		226	[in] AMs : The address modifiers (see CVAddressModifier enum).
		227	[in] DWs : The data widths.(see CVDataWidth enum).
		228	[out] ECs : The error codes relaive to each cycle.
		229	-----------------------------------------------------------------------------
		230	Returns:
		231	An error code about the execution of the function.
		232	-----------------------------------------------------------------------------
		233	Description:
		234	The function performs a block of single VME read cycles.
		235	*/
		236	CAENVME_API
		237	CAENVME_MultiRead(int32_t Handle, uint32_t Addrs, uint32_t Buffer,
		238	int NCycles, CVAddressModifier AMs, CVDataWidth DWs, CVErrorCodes *ECs);
		239
		240	/*
		241	CAENVME_MultiWrite (Ver. 2.2)
		242	-----------------------------------------------------------------------------
		243	Parameters:
		244	[in] Handle : The handle that identifies the device.
		245	[in] Addrs : The VME bus addresses.
		246	[in] Buffer : The data to write to the VME bus.
		247	[in] NCycles : The number of read cycles to perform.
		248	[in] AMs : The address modifiers (see CVAddressModifier enum).
		249	[in] DWs : The data widths.(see CVDataWidth enum).
		250	[out] ECs : The error codes relaive to each cycle.
		251	-----------------------------------------------------------------------------
		252	Returns:
		253	An error code about the execution of the function.
		254	-----------------------------------------------------------------------------
		255	Description:
		256	The function performs a block of single VME write cycles.
		257	*/
		258	CAENVME_API
		259	CAENVME_MultiWrite(int32_t Handle, uint32_t Addrs, uint32_t Buffer,
		260	int NCycles, CVAddressModifier AMs, CVDataWidth DWs, CVErrorCodes *ECs);
		261
		262	/*
		263	CAENVME_BLTReadCycle
		264	-----------------------------------------------------------------------------
		265	Parameters:
		266	[in] Handle : The handle that identifies the device.
		267	[in] Address : The VME bus address.
		268	[out] Buffer : The data read from the VME bus.
		269	[in] Size : The size of the transfer in bytes.
		270	[in] AM : The address modifier (see CVAddressModifier enum).
		271	[in] DW : The data width.(see CVDataWidth enum).
		272	[out] count : The number of bytes transferred.
		273	-----------------------------------------------------------------------------
		274	Returns:
		275	An error code about the execution of the function.
		276	-----------------------------------------------------------------------------
		277	Description:
		278	The function performs a VME block transfer read cycle. It can be used to
		279	perform MBLT transfers using 64 bit data width.
		280	*/
		281	CAENVME_API
		282	CAENVME_BLTReadCycle(int32_t Handle, uint32_t Address, void *Buffer,
		283	int Size, CVAddressModifier AM, CVDataWidth DW, int *count);
		284
		285	/*
		286	Ver. 2.3 - New function
		287
		288	CAENVME_FIFOBLTReadCycle
		289	-----------------------------------------------------------------------------
		290	Parameters:
		291	[in] Handle : The handle that identifies the device.
		292	[in] Address : The VME bus address.
		293	[out] Buffer : The data read from the VME bus.
		294	[in] Size : The size of the transfer in bytes.
		295	[in] AM : The address modifier (see CVAddressModifier enum).
		296	[in] DW : The data width.(see CVDataWidth enum).
		297	[out] count : The number of bytes transferred.
		298	-----------------------------------------------------------------------------
		299	Returns:
		300	An error code about the execution of the function.
		301	-----------------------------------------------------------------------------
		302	Description:
		303	The function performs a VME block transfer read cycle. It can be used to
		304	perform MBLT transfers using 64 bit data width. The Address is not
		305	incremented on the VMEBus during the cycle.
		306	*/
		307	CAENVME_API
		308	CAENVME_FIFOBLTReadCycle(int32_t Handle, uint32_t Address, void *Buffer,
		309	int Size, CVAddressModifier AM, CVDataWidth DW, int *count);
		310
		311	/*
		312	CAENVME_MBLTReadCycle
		313	-----------------------------------------------------------------------------
		314	Parameters:
		315	[in] Handle : The handle that identifies the device.
		316	[in] Address : The VME bus address.
		317	[out] Buffer : The data read from the VME bus.
		318	[in] Size : The size of the transfer in bytes.
		319	[in] AM : The address modifier (see CVAddressModifier enum).
		320	[out] count : The number of bytes transferred.
		321	-----------------------------------------------------------------------------
		322	Returns:
		323	An error code about the execution of the function.
		324	-----------------------------------------------------------------------------
		325	Description:
		326	The function performs a VME multiplexed block transfer read cycle.
		327	*/
		328	CAENVME_API
		329	CAENVME_MBLTReadCycle(int32_t Handle, uint32_t Address, void *Buffer,
		330	int Size, CVAddressModifier AM, int *count);
		331
		332	/*
		333	Ver. 2.3 - New function
		334
		335	CAENVME_FIFOMBLTReadCycle
		336	-----------------------------------------------------------------------------
		337	Parameters:
		338	[in] Handle : The handle that identifies the device.
		339	[in] Address : The VME bus address.
		340	[out] Buffer : The data read from the VME bus.
		341	[in] Size : The size of the transfer in bytes.
		342	[in] AM : The address modifier (see CVAddressModifier enum).
		343	[out] count : The number of bytes transferred.
		344	-----------------------------------------------------------------------------
		345	Returns:
		346	An error code about the execution of the function.
		347	-----------------------------------------------------------------------------
		348	Description:
		349	The function performs a VME multiplexed block transfer read cycle.
		350	The Address is not incremented on the VMEBus during the cycle.
		351	*/
		352	CAENVME_API
		353	CAENVME_FIFOMBLTReadCycle(int32_t Handle, uint32_t Address, void *Buffer,
		354	int Size, CVAddressModifier AM, int *count);
		355
		356	/*
		357	CAENVME_BLTWriteCycle
		358	-----------------------------------------------------------------------------
		359	Parameters:
		360	[in] Handle : The handle that identifies the device.
		361	[in] Address : The VME bus address.
		362	[in] Buffer : The data to be written to the VME bus.
		363	[in] Size : The size of the transfer in bytes.
		364	[in] AM : The address modifier (see CVAddressModifier enum).
		365	[in] DW : The data width.(see CVDataWidth enum).
		366	[out] count : The number of bytes transferred.
		367	-----------------------------------------------------------------------------
		368	Returns:
		369	An error code about the execution of the function.
		370	-----------------------------------------------------------------------------
		371	Description:
		372	The function performs a VME block transfer write cycle.
		373	*/
		374	CAENVME_API
		375	CAENVME_BLTWriteCycle(int32_t Handle, uint32_t Address, void *Buffer,
		376	int size, CVAddressModifier AM, CVDataWidth DW, int *count);
		377
		378	/*
		379	Ver. 2.3 - New function
		380
		381	CAENVME_FIFOBLTWriteCycle
		382	-----------------------------------------------------------------------------
		383	Parameters:
		384	[in] Handle : The handle that identifies the device.
		385	[in] Address : The VME bus address.
		386	[in] Buffer : The data to be written to the VME bus.
		387	[in] Size : The size of the transfer in bytes.
		388	[in] AM : The address modifier (see CVAddressModifier enum).
		389	[in] DW : The data width.(see CVDataWidth enum).
		390	[out] count : The number of bytes transferred.
		391	-----------------------------------------------------------------------------
		392	Returns:
		393	An error code about the execution of the function.
		394	-----------------------------------------------------------------------------
		395	Description:
		396	The function performs a VME block transfer write cycle. The address
		397	is not incremented during the cycle.
		398	*/
		399	CAENVME_API
		400	CAENVME_FIFOBLTWriteCycle(int32_t Handle, uint32_t Address, void *Buffer,
		401	int size, CVAddressModifier AM, CVDataWidth DW, int *count);
		402
		403	/*
		404	CAENVME_MBLTWriteCycle
		405	-----------------------------------------------------------------------------
		406	Parameters:
		407	[in] Handle : The handle that identifies the device.
		408	[in] Address : The VME bus address.
		409	[in] Buffer : The data to be written to the VME bus.
		410	[in] Size : The size of the transfer in bytes.
		411	[in] AM : The address modifier (see CVAddressModifier enum).
		412	[out] count : The number of bytes transferred.
		413	-----------------------------------------------------------------------------
		414	Returns:
		415	An error code about the execution of the function.
		416	-----------------------------------------------------------------------------
		417	Description:
		418	The function performs a VME multiplexed block transfer write cycle.
		419	*/
		420	CAENVME_API
		421	CAENVME_MBLTWriteCycle(int32_t Handle, uint32_t Address, void *Buffer,
		422	int size, CVAddressModifier AM, int *count);
		423
		424	/*
		425	Ver. 2.3 - New function
		426
		427	CAENVME_FIFOMBLTWriteCycle
		428	-----------------------------------------------------------------------------
		429	Parameters:
		430	[in] Handle : The handle that identifies the device.
		431	[in] Address : The VME bus address.
		432	[in] Buffer : The data to be written to the VME bus.
		433	[in] Size : The size of the transfer in bytes.
		434	[in] AM : The address modifier (see CVAddressModifier enum).
		435	[out] count : The number of bytes transferred.
		436	-----------------------------------------------------------------------------
		437	Returns:
		438	An error code about the execution of the function.
		439	-----------------------------------------------------------------------------
		440	Description:
		441	The function performs a VME multiplexed block transfer write cycle.
		442	The address is not incremented during the cycle.
		443	*/
		444	CAENVME_API
		445	CAENVME_FIFOMBLTWriteCycle(int32_t Handle, uint32_t Address, void *Buffer,
		446	int size, CVAddressModifier AM, int *count);
		447
		448	/*
		449	CAENVME_ADOCycle
		450	-----------------------------------------------------------------------------
		451	Parameters:
		452	[in] Handle : The handle that identifies the device.
		453	[in] Address : The VME bus address.
		454	[in] AM : The address modifier (see CVAddressModifier enum).
		455	-----------------------------------------------------------------------------
		456	Returns:
		457	An error code about the execution of the function.
		458	-----------------------------------------------------------------------------
		459	Description:
		460	The function performs a VME address only cycle. It can be used to
		461	perform MBLT transfers using 64 bit data width.
		462	*/
		463	CAENVME_API
		464	CAENVME_ADOCycle(int32_t Handle, uint32_t Address, CVAddressModifier AM);
		465
		466	/*
		467	CAENVME_ADOHCycle
		468	-----------------------------------------------------------------------------
		469	Parameters:
		470	[in] Handle : The handle that identifies the device.
		471	[in] Address : The VME bus address.
		472	[in] AM : The address modifier (see CVAddressModifier enum).
		473	-----------------------------------------------------------------------------
		474	Returns:
		475	An error code about the execution of the function.
		476	-----------------------------------------------------------------------------
		477	Description:
		478	The function performs a VME address only with handshake cycle.
		479	*/
		480	CAENVME_API
		481	CAENVME_ADOHCycle(int32_t Handle, uint32_t Address, CVAddressModifier AM);
		482
		483	/*
		484	CAENVME_IACKCycle
		485	-----------------------------------------------------------------------------
		486	Parameters:
		487	[in] Handle : The handle that identifies the device.
		488	[in] Level : The IRQ level to acknowledge (see CVIRQLevels enum).
		489	[in] DW : The data width.(see CVDataWidth enum).
		490	-----------------------------------------------------------------------------
		491	Returns:
		492	An error code about the execution of the function.
		493	-----------------------------------------------------------------------------
		494	Description:
		495	The function performs a VME interrupt acknowledge cycle.
		496	*/
		497	CAENVME_API
		498	CAENVME_IACKCycle(int32_t Handle, CVIRQLevels Level, void *Vector, CVDataWidth DW);
		499
		500	/*
		501	CAENVME_IRQCheck
		502	-----------------------------------------------------------------------------
		503	Parameters:
		504	[in] Handle : The handle that identifies the device.
		505	[out] Mask : A bit-mask indicating the active IRQ lines.
		506	-----------------------------------------------------------------------------
		507	Returns:
		508	An error code about the execution of the function.
		509	-----------------------------------------------------------------------------
		510	Description:
		511	The function returns a bit mask indicating the active IRQ lines.
		512	*/
		513	CAENVME_API
		514	CAENVME_IRQCheck(int32_t Handle, CAEN_BYTE *Mask);
		515
		516	/*
		517	CAENVME_IRQEnable
		518	-----------------------------------------------------------------------------
		519	Parameters:
		520	[in] Handle : The handle that identifies the device.
		521	[in] Mask : A bit-mask indicating the IRQ lines.
		522	-----------------------------------------------------------------------------
		523	Returns:
		524	An error code about the execution of the function.
		525	-----------------------------------------------------------------------------
		526	Description:
		527	The function enables the IRQ lines specified by Mask.
		528	*/
		529	CAENVME_API
		530	CAENVME_IRQEnable(int32_t Handle, uint32_t Mask);
		531
		532	/*
		533	CAENVME_IRQDisable
		534	-----------------------------------------------------------------------------
		535	Parameters:
		536	[in] Handle : The handle that identifies the device.
		537	[in] Mask : A bit-mask indicating the IRQ lines.
		538	-----------------------------------------------------------------------------
		539	Returns:
		540	An error code about the execution of the function.
		541	-----------------------------------------------------------------------------
		542	Description:
		543	The function disables the IRQ lines specified by Mask.
		544	*/
		545	CAENVME_API
		546	CAENVME_IRQDisable(int32_t Handle, uint32_t Mask);
		547
		548	/*
		549	CAENVME_IRQWait
		550	-----------------------------------------------------------------------------
		551	Parameters:
		552	[in] Handle : The handle that identifies the device.
		553	[in] Mask : A bit-mask indicating the IRQ lines.
		554	[in] Timeout : Timeout in milliseconds.
		555	-----------------------------------------------------------------------------
		556	Returns:
		557	An error code about the execution of the function.
		558	-----------------------------------------------------------------------------
		559	Description:
		560	The function wait the IRQ lines specified by Mask until one of
		561	them raise or timeout expires.
		562	*/
		563	CAENVME_API
		564	CAENVME_IRQWait(int32_t Handle, uint32_t Mask, uint32_t Timeout);
		565
		566	/*
		567	CAENVME_SetPulserConf
		568	-----------------------------------------------------------------------------
		569	Parameters:
		570	[in] Handle : The handle that identifies the device.
		571	[in] PulSel : The pulser to configure (see CVPulserSelect enum).
		572	[in] Period : The period of the pulse in time units.
		573	[in] Width : The width of the pulse in time units.
		574	[in] Unit : The time unit for the pulser configuration (see
		575	CVTimeUnits enum).
		576	[in] PulseNo : The number of pulses to generate (0 = infinite).
		577	[in] Start : The source signal to start the pulse burst (see
		578	CVIOSources enum).
		579	[in] Reset : The source signal to stop the pulse burst (see
		580	CVIOSources enum).
		581	-----------------------------------------------------------------------------
		582	Returns:
		583	An error code about the execution of the function.
		584	-----------------------------------------------------------------------------
		585	Description:
		586	The function permits to configure the pulsers. All the timing parameters
		587	are expressed in the time units specified. The start signal source can be
		588	one of: front panel button or software (cvManualSW), input signal 0
		589	(cvInputSrc0),input signal 1 (cvInputSrc1) or input coincidence
		590	(cvCoincidence). The reset signal source can be: front panel button or
		591	software (cvManualSW) or, for pulser A the input signal 0 (cvInputSrc0),
		592	for pulser B the input signal 1 (cvInputSrc1).
		593	*/
		594	CAENVME_API
		595	CAENVME_SetPulserConf(int32_t Handle, CVPulserSelect PulSel, unsigned char Period,
		596	unsigned char Width, CVTimeUnits Unit, unsigned char PulseNo,
		597	CVIOSources Start, CVIOSources Reset);
		598
		599	/*
		600	CAENVME_SetScalerConf
		601	-----------------------------------------------------------------------------
		602	Parameters:
		603	[in] Handle : The handle that identifies the device.
		604	[in] Limit : The counter limit for the scaler.
		605	[in] AutoReset : Enable/disable the counter auto reset.
		606	[in] Hit : The source signal for the signal to count (see
		607	CVIOSources enum).
		608	[in] Gate : The source signal for the gate (see CVIOSources enum).
		609	[in] Reset : The source signal to stop the counter (see
		610	CVIOSources enum).
		611	-----------------------------------------------------------------------------
		612	Returns:
		613	An error code about the execution of the function.
		614	-----------------------------------------------------------------------------
		615	Description:
		616	The function permits to configure the scaler. Limit range is 0 - 1024
		617	(10 bit). The hit signal source can be: input signal 0 (cvInputSrc0)
		618	or input coincidence (cvCoincidence). The gate signal source can be:
		619	front panel button or software (cvManualSW) or input signal 1
		620	(cvInputSrc1). The reset signal source can be: front panel button or
		621	software (cvManualSW) or input signal 1 (cvInputSrc1).
		622	*/
		623	CAENVME_API
		624	CAENVME_SetScalerConf(int32_t Handle, short Limit, short AutoReset,
		625	CVIOSources Hit, CVIOSources Gate, CVIOSources Reset);
		626
		627	/*
		628	CAENVME_SetOutputConf
		629	-----------------------------------------------------------------------------
		630	Parameters:
		631	[in] Handle : The handle that identifies the device.
		632	[in] OutSel : The output line to configure (see CVOutputSelect
		633	enum).
		634	[in] OutPol : The output line polarity (see CVIOPolarity enum).
		635	[in] LEDPol : The output LED polarity (see CVLEDPolarity enum).
		636	[in] Source : The source signal to propagate to the output line
		637	(see CVIOSources enum).
		638	-----------------------------------------------------------------------------
		639	Returns:
		640	An error code about the execution of the function.
		641	-----------------------------------------------------------------------------
		642	Description:
		643	The function permits to configure the output lines of the module. It
		644	can be specified the polarity for the line and for the LED. The
		645	output line source depends on the line as figured out by the
		646	following table:
		647
		648	+-----------------------------------------------------------+
		649	! S O U R C E S E L E C T I O N !
		650	+--------------+---------------+---------------+------------+
		651	! cvVMESignals ! cvCoincidence ! cvMiscSignals ! cvManualSW !
		652	+---+---+--------------+---------------+---------------+------------+
		653	! ! 0 ! DS ! Input Coinc. ! Pulser A ! Manual/SW !
		654	! O +---+--------------+---------------+---------------+------------+
		655	! U ! 1 ! AS ! Input Coinc. ! Pulser A ! Manual/SW !
		656	! T +---+--------------+---------------+---------------+------------+
		657	! P ! 2 ! DTACK ! Input Coinc. ! Pulser B ! Manual/SW !
		658	! U +---+--------------+---------------+---------------+------------+
		659	! T ! 3 ! BERR ! Input Coinc. ! Pulser B ! Manual/SW !
		660	! +---+--------------+---------------+---------------+------------+
		661	! ! 4 ! LMON ! Input Coinc. ! Scaler end ! Manual/SW !
		662	+---+---+--------------+---------------+---------------+------------+
		663	*/
		664	CAENVME_API
		665	CAENVME_SetOutputConf(int32_t Handle, CVOutputSelect OutSel, CVIOPolarity OutPol,
		666	CVLEDPolarity LEDPol, CVIOSources Source);
		667
		668	/*
		669	CAENVME_SetInputConf
		670	-----------------------------------------------------------------------------
		671	Parameters:
		672	[in] Handle : The handle that identifies the device.
		673	[in] InSel : The input line to configure (see CVInputSelect enum).
		674	[in] InPol : The input line polarity (see CVIOPolarity enum).
		675	[in] LEDPol : The output LED polarity (see CVLEDPolarity enum).
		676	-----------------------------------------------------------------------------
		677	Returns:
		678	An error code about the execution of the function.
		679	-----------------------------------------------------------------------------
		680	Description:
		681	The function permits to configure the input lines of the module. It
		682	ca be specified the polarity for the line and for the LED.
		683	*/
		684	CAENVME_API
		685	CAENVME_SetInputConf(int32_t Handle, CVInputSelect InSel, CVIOPolarity InPol,
		686	CVLEDPolarity LEDPol);
		687
		688	/*
		689	CAENVME_GetPulserConf
		690	-----------------------------------------------------------------------------
		691	Parameters:
		692	[in] Handle : The handle that identifies the device.
		693	[in] PulSel : The pulser to configure (see CVPulserSelect enum).
		694	[out] Period : The period of the pulse in time units.
		695	[out] Width : The width of the pulse in time units.
		696	[out] Unit : The time unit for the pulser configuration (see
		697	CVTimeUnits enum).
		698	[out] PulseNo : The number of pulses to generate (0 = infinite).
		699	[out] Start : The source signal to start the pulse burst (see
		700	CVIOSources enum).
		701	[out] Reset : The source signal to stop the pulse burst (see
		702	CVIOSources enum).
		703	-----------------------------------------------------------------------------
		704	Returns:
		705	An error code about the execution of the function.
		706	-----------------------------------------------------------------------------
		707	Description:
		708	The function permits to read the configuration of the pulsers.
		709	*/
		710	CAENVME_API
		711	CAENVME_GetPulserConf(int32_t Handle, CVPulserSelect PulSel, unsigned char *Period,
		712	unsigned char Width, CVTimeUnits Unit, unsigned char *PulseNo,
		713	CVIOSources Start, CVIOSources Reset);
		714
		715	/*
		716	CAENVME_GetScalerConf
		717	-----------------------------------------------------------------------------
		718	Parameters:
		719	[in] Handle : The handle that identifies the device.
		720	[out] Limit : The counter limit for the scaler.
		721	[out] AutoReset : The auto reset configuration.
		722	[out] Hit : The source signal for the signal to count (see
		723	CVIOSources enum).
		724	[out] Gate : The source signal for the gate (see CVIOSources enum).
		725	[out] Reset : The source signal to stop the counter (see
		726	CVIOSources enum).
		727	-----------------------------------------------------------------------------
		728	Returns:
		729	An error code about the execution of the function.
		730	-----------------------------------------------------------------------------
		731	Description:
		732	The function permits to read the configuration of the scaler.
		733	*/
		734	CAENVME_API
		735	CAENVME_GetScalerConf(int32_t Handle, short Limit, short AutoReset,
		736	CVIOSources Hit, CVIOSources Gate, CVIOSources *Reset);
		737
		738
		739	/*
		740	CAENVME_SetOutputConf
		741	-----------------------------------------------------------------------------
		742	Parameters:
		743	[in] Handle : The handle that identifies the device.
		744	[in] OutSel : The output line to configure (see CVOutputSelect enum).
		745	[out] OutPol : The output line polarity (see CVIOPolarity enum).
		746	[out] LEDPol : The output LED polarity (see CVLEDPolarity enum).
		747	[out] Source : The source signal to propagate to the output line (see
		748	CVIOSources enum).
		749	-----------------------------------------------------------------------------
		750	Returns:
		751	An error code about the execution of the function.
		752	-----------------------------------------------------------------------------
		753	Description:
		754	The function permits to read the configuration of the output lines.
		755	*/
		756	CAENVME_API
		757	CAENVME_GetOutputConf(int32_t Handle, CVOutputSelect OutSel, CVIOPolarity *OutPol,
		758	CVLEDPolarity LEDPol, CVIOSources Source);
		759
		760	/*
		761	CAENVME_SetInputConf
		762	-----------------------------------------------------------------------------
		763	Parameters:
		764	[in] Handle : The handle that identifies the device.
		765	[in] InSel : The input line to configure (see CVInputSelect enum).
		766	[out] InPol : The input line polarity (see CVIOPolarity enum).
		767	[out] LEDPol : The output LED polarity (see CVLEDPolarity enum).
		768	-----------------------------------------------------------------------------
		769	Returns:
		770	An error code about the execution of the function.
		771	-----------------------------------------------------------------------------
		772	Description:
		773	The function permits to read the configuration of the input lines.
		774	*/
		775	CAENVME_API
		776	CAENVME_GetInputConf(int32_t Handle, CVInputSelect InSel, CVIOPolarity *InPol,
		777	CVLEDPolarity *LEDPol);
		778
		779	/*
		780	CAENVME_ReadRegister
		781	-----------------------------------------------------------------------------
		782	Parameters:
		783	[in] Handle : The handle that identifies the device.
		784	[in] Reg : The internal register to read (see CVRegisters enum).
		785	[out] Data : The data read from the module.
		786	-----------------------------------------------------------------------------
		787	Returns:
		788	An error code about the execution of the function.
		789	-----------------------------------------------------------------------------
		790	Description:
		791	The function permits to read all internal registers.
		792	*/
		793	CAENVME_API
		794	CAENVME_ReadRegister(int32_t Handle, CVRegisters Reg, unsigned int *Data);
		795
		796	/*
		797	CAENVME_WriteRegister
		798	-----------------------------------------------------------------------------
		799	Parameters:
		800	[in] Handle : The handle that identifies the device.
		801	[in] Reg : The internal register to read (see CVRegisters enum).
		802	[in] Data : The data to be written to the module.
		803	-----------------------------------------------------------------------------
		804	Returns:
		805	An error code about the execution of the function.
		806	-----------------------------------------------------------------------------
		807	Description:
		808	The function permits to write to all internal registers.
		809	*/
		810	CAENVME_API
		811	CAENVME_WriteRegister(int32_t Handle, CVRegisters Reg, unsigned int Data);
		812
		813	/*
		814	CAENVME_SetOutputRegister
		815	-----------------------------------------------------------------------------
		816	Parameters:
		817	[in] Handle : The handle that identifies the device.
		818	[in] Mask : The lines to be set.
		819	-----------------------------------------------------------------------------
		820	Returns:
		821	An error code about the execution of the function.
		822	-----------------------------------------------------------------------------
		823	Description:
		824	The function sets the lines specified. Refer the CVOutputRegisterBits
		825	enum to compose and decoding the bit mask.
		826	*/
		827	CAENVME_API
		828	CAENVME_SetOutputRegister(int32_t Handle, unsigned short Mask);
		829
		830	/*
		831	CAENVME_ClearOutputRegister
		832	-----------------------------------------------------------------------------
		833	Parameters:
		834	[in] Handle : The handle that identifies the device.
		835	[in] Mask : The IRQ lines to be cleared.
		836	-----------------------------------------------------------------------------
		837	Returns:
		838	An error code about the execution of the function.
		839	-----------------------------------------------------------------------------
		840	Description:
		841	The function clears the lines specified. Refer the CVOutputRegisterBits
		842	enum to compose and decoding the bit mask.
		843	*/
		844	CAENVME_API
		845	CAENVME_ClearOutputRegister(int32_t Handle, unsigned short Mask);
		846
		847	/*
		848	CAENVME_PulseOutputRegister
		849	-----------------------------------------------------------------------------
		850	Parameters:
		851	[in] Handle : The handle that identifies the device.
		852	[in] Mask : The lines to be pulsed.
		853	-----------------------------------------------------------------------------
		854	Returns:
		855	An error code about the execution of the function.
		856	-----------------------------------------------------------------------------
		857	Description:
		858	The function produces a pulse with the lines specified by setting and
		859	then clearing them. Refer the CVOutputRegisterBits enum to compose and
		860	decoding the bit mask.
		861	*/
		862	CAENVME_API
		863	CAENVME_PulseOutputRegister(int32_t Handle, unsigned short Mask);
		864
		865	/*
		866	CAENVME_ReadDisplay
		867	-----------------------------------------------------------------------------
		868	Parameters:
		869	[in] Handle : The handle that identifies the device.
		870	[out] Value : The values read from the module (see CVDisplay enum).
		871	-----------------------------------------------------------------------------
		872	Returns:
		873	An error code about the execution of the function.
		874	-----------------------------------------------------------------------------
		875	Description:
		876	The function reads the VME data display on the front panel of the module.
		877	Refer to the CVDisplay data type definition and comments to decode the
		878	value returned.
		879	*/
		880	CAENVME_API
		881	CAENVME_ReadDisplay(int32_t Handle, CVDisplay *Value);
		882
		883	/*
		884	CAENVME_SetArbiterType
		885	-----------------------------------------------------------------------------
		886	Parameters:
		887	[in] Handle : The handle that identifies the device.
		888	[in] Value : The type of VME bus arbitration to implement (see
		889	CVArbiterTypes enum).
		890	-----------------------------------------------------------------------------
		891	Returns:
		892	An error code about the execution of the function.
		893	-----------------------------------------------------------------------------
		894	Description:
		895	The function sets the behaviour of the VME bus arbiter on the module.
		896	*/
		897	CAENVME_API
		898	CAENVME_SetArbiterType(int32_t Handle, CVArbiterTypes Value);
		899
		900	/*
		901	CAENVME_SetRequesterType
		902	-----------------------------------------------------------------------------
		903	Parameters:
		904	[in] Handle : The handle that identifies the device.
		905	[in] Value : The type of VME bus requester to implement (see
		906	CVRequesterTypes enum).
		907	-----------------------------------------------------------------------------
		908	Returns:
		909	An error code about the execution of the function.
		910	-----------------------------------------------------------------------------
		911	Description:
		912	The function sets the behaviour of the VME bus requester on the module.
		913	*/
		914	CAENVME_API
		915	CAENVME_SetRequesterType(int32_t Handle, CVRequesterTypes Value);
		916
		917	/*
		918	CAENVME_SetReleaseType
		919	-----------------------------------------------------------------------------
		920	Parameters:
		921	[in] Handle : The handle that identifies the device.
		922	[in] Value : The type of VME bus release policy to implement (see
		923	CVReleaseTypes enum).
		924	-----------------------------------------------------------------------------
		925	Returns:
		926	An error code about the execution of the function.
		927	-----------------------------------------------------------------------------
		928	Description:
		929	The function sets the release policy of the VME bus on the module.
		930	*/
		931	CAENVME_API
		932	CAENVME_SetReleaseType(int32_t Handle, CVReleaseTypes Value);
		933
		934	/*
		935	CAENVME_SetBusReqLevel
		936	-----------------------------------------------------------------------------
		937	Parameters:
		938	[in] Handle : The handle that identifies the device.
		939	[in] Value : The type of VME bus requester priority level to set
		940	(see CVBusReqLevels enum).
		941	-----------------------------------------------------------------------------
		942	Returns:
		943	An error code about the execution of the function.
		944	-----------------------------------------------------------------------------
		945	Description:
		946	The function sets the specified VME bus requester priority level on
		947	the module.
		948	*/
		949	CAENVME_API
		950	CAENVME_SetBusReqLevel(int32_t Handle, CVBusReqLevels Value);
		951
		952	/*
		953	CAENVME_SetTimeout
		954	-----------------------------------------------------------------------------
		955	Parameters:
		956	[in] Handle : The handle that identifies the device.
		957	[in] Value : The value of VME bus timeout to set (see
		958	CVVMETimeouts enum).
		959	-----------------------------------------------------------------------------
		960	Returns:
		961	An error code about the execution of the function.
		962	-----------------------------------------------------------------------------
		963	Description:
		964	The function sets the specified VME bus timeout on the module.
		965	*/
		966	CAENVME_API
		967	CAENVME_SetTimeout(int32_t Handle, CVVMETimeouts Value);
		968
		969	/*
		970	CAENVME_SetLocationMonitor
		971	-----------------------------------------------------------------------------
		972	Parameters:
		973	[in] Handle : The handle that identifies the device.
		974	[in] Address : The addres to be monitored.
		975	[in] Write : Flag to specify read or write cycle types.
		976	[in] Lword : Flag to specify long word cycle type.
		977	[in] Iack : Flag to specify interrupt acknowledge cycle type.
		978
		979	-----------------------------------------------------------------------------
		980	Returns:
		981	An error code about the execution of the function.
		982	-----------------------------------------------------------------------------
		983	Description:
		984	The function sets the Location Monitor.
		985	*/
		986	CAENVME_API
		987	CAENVME_SetLocationMonitor(int32_t Handle, uint32_t Address, CVAddressModifier Am,
		988	short Write, short Lword, short Iack);
		989	/*
		990	CAENVME_SetFIFOMode
		991	-----------------------------------------------------------------------------
		992	Parameters:
		993	[in] Handle : The handle that identifies the device.
		994	[in] Value : Enable/disable the FIFO mode.
		995	-----------------------------------------------------------------------------
		996	Returns:
		997	An error code about the execution of the function.
		998	-----------------------------------------------------------------------------
		999	Description:
		1000	The function enables/disables the auto increment of the VME addresses
		1001	during the block transfer cycles. With the FIFO mode enabled the
		1002	addresses are not incremented.
		1003	*/
		1004	CAENVME_API
		1005	CAENVME_SetFIFOMode(int32_t Handle, short Value);
		1006
		1007	/*
		1008	CAENVME_GetArbiterType
		1009	-----------------------------------------------------------------------------
		1010	Parameters:
		1011	[in] Handle : The handle that identifies the device.
		1012	[out] Value : The type of VME bus arbitration implemented (see
		1013	CVArbiterTypes enum).
		1014	-----------------------------------------------------------------------------
		1015	Returns:
		1016	An error code about the execution of the function.
		1017	-----------------------------------------------------------------------------
		1018	Description:
		1019	The function get the type of VME bus arbiter implemented on the module.
		1020	*/
		1021	CAENVME_API
		1022	CAENVME_GetArbiterType(int32_t Handle, CVArbiterTypes *Value);
		1023
		1024	/*
		1025	CAENVME_GetRequesterType
		1026	-----------------------------------------------------------------------------
		1027	Parameters:
		1028	[in] Handle : The handle that identifies the device.
		1029	[out] Value : The type of VME bus requester implemented (see
		1030	CVRequesterTypes enum).
		1031	-----------------------------------------------------------------------------
		1032	Returns:
		1033	An error code about the execution of the function.
		1034	-----------------------------------------------------------------------------
		1035	Description:
		1036	The function get the type of VME bus requester implemented on the module.
		1037	*/
		1038	CAENVME_API
		1039	CAENVME_GetRequesterType(int32_t Handle, CVRequesterTypes *Value);
		1040
		1041	/*
		1042	CAENVME_GetReleaseType
		1043	-----------------------------------------------------------------------------
		1044	Parameters:
		1045	[in] Handle : The handle that identifies the device.
		1046	[out] Value : The type of VME bus release policy implemented (see
		1047	CVReleaseTypes enum).
		1048	-----------------------------------------------------------------------------
		1049	Returns:
		1050	An error code about the execution of the function.
		1051	-----------------------------------------------------------------------------
		1052	Description:
		1053	The function get the type of VME bus release implemented on the module.
		1054	*/
		1055	CAENVME_API
		1056	CAENVME_GetReleaseType(int32_t Handle, CVReleaseTypes *Value);
		1057
		1058	/*
		1059	CAENVME_GetBusReqLevel
		1060	-----------------------------------------------------------------------------
		1061	Parameters:
		1062	[in] Handle : The handle that identifies the device.
		1063	[out] Value : The type of VME bus requester priority level (see
		1064	CVBusReqLevels enum).
		1065	-----------------------------------------------------------------------------
		1066	Returns:
		1067	An error code about the execution of the function.
		1068	-----------------------------------------------------------------------------
		1069	Description:
		1070	The function reads the specified VME bus requester priority level on
		1071	the module.
		1072	*/
		1073	CAENVME_API
		1074	CAENVME_GetBusReqLevel(int32_t Handle, CVBusReqLevels *Value);
		1075
		1076	/*
		1077	CAENVME_GetTimeout
		1078	-----------------------------------------------------------------------------
		1079	Parameters:
		1080	[in] Handle : The handle that identifies the device.
		1081	[out] Value : The value of VME bus timeout (see CVVMETimeouts enum).
		1082	-----------------------------------------------------------------------------
		1083	Returns:
		1084	An error code about the execution of the function.
		1085	-----------------------------------------------------------------------------
		1086	Description:
		1087	The function sets the specified VME bus timeout on the module.
		1088	*/
		1089	CAENVME_API
		1090	CAENVME_GetTimeout(int32_t Handle, CVVMETimeouts *Value);
		1091
		1092	/*
		1093	CAENVME_GetFIFOMode
		1094	-----------------------------------------------------------------------------
		1095	Parameters:
		1096	[in] Handle : The handle that identifies the device.
		1097	[out] Value : The FIFO mode read setting.
		1098	-----------------------------------------------------------------------------
		1099	Returns:
		1100	An error code about the execution of the function.
		1101	-----------------------------------------------------------------------------
		1102	Description:
		1103	The function read if the auto increment of the VME addresses during the
		1104	block transfer cycles is enabled (0) or disabled (!=0).
		1105	*/
		1106	CAENVME_API
		1107	CAENVME_GetFIFOMode(int32_t Handle, short *Value);
		1108
		1109	/*
		1110	CAENVME_SystemReset
		1111	-----------------------------------------------------------------------------
		1112	Parameters:
		1113	[in] Handle : The handle that identifies the device.
		1114	-----------------------------------------------------------------------------
		1115	Returns:
		1116	An error code about the execution of the function.
		1117	-----------------------------------------------------------------------------
		1118	Description:
		1119	The function performs a system reset on the module.
		1120	*/
		1121	CAENVME_API
		1122	CAENVME_SystemReset(int32_t Handle);
		1123
		1124	/*
		1125	CAENVME_ResetScalerCount
		1126	-----------------------------------------------------------------------------
		1127	Parameters:
		1128	[in] Handle : The handle that identifies the device.
		1129	-----------------------------------------------------------------------------
		1130	Returns:
		1131	An error code about the execution of the function.
		1132	-----------------------------------------------------------------------------
		1133	Description:
		1134	The function resets the counter of the scaler..
		1135	*/
		1136	CAENVME_API
		1137	CAENVME_ResetScalerCount(int32_t Handle);
		1138
		1139	/*
		1140	CAENVME_EnableScalerGate
		1141	-----------------------------------------------------------------------------
		1142	Parameters:
		1143	[in] Handle : The handle that identifies the device.
		1144	-----------------------------------------------------------------------------
		1145	Returns:
		1146	An error code about the execution of the function.
		1147	-----------------------------------------------------------------------------
		1148	Description:
		1149	The function enables the gate of the scaler.
		1150	*/
		1151	CAENVME_API
		1152	CAENVME_EnableScalerGate(int32_t Handle);
		1153
		1154	/*
		1155	CAENVME_DisableScalerGate
		1156	-----------------------------------------------------------------------------
		1157	Parameters:
		1158	[in] Handle : The handle that identifies the device.
		1159	-----------------------------------------------------------------------------
		1160	Returns:
		1161	An error code about the execution of the function.
		1162	-----------------------------------------------------------------------------
		1163	Description:
		1164	The function disables the gate of the scaler.
		1165	*/
		1166	CAENVME_API
		1167	CAENVME_DisableScalerGate(int32_t Handle);
		1168
		1169	/*
		1170	CAENVME_StartPulser
		1171	-----------------------------------------------------------------------------
		1172	Parameters:
		1173	[in] Handle : The handle that identifies the device.
		1174	[in] PulSel : The pulser to configure (see CVPulserSelect enum).
		1175	-----------------------------------------------------------------------------
		1176	Returns:
		1177	An error code about the execution of the function.
		1178	-----------------------------------------------------------------------------
		1179	Description:
		1180	The function starts the generation of pulse burst if the specified
		1181	pulser is configured for manual/software operation.
		1182	*/
		1183	CAENVME_API
		1184	CAENVME_StartPulser(int32_t Handle, CVPulserSelect PulSel);
		1185
		1186	/*
		1187	CAENVME_StopPulser
		1188	-----------------------------------------------------------------------------
		1189	Parameters:
		1190	[in] Handle : The handle that identifies the device.
		1191	[in] PulSel : The pulser to configure (see CVPulserSelect enum).
		1192	-----------------------------------------------------------------------------
		1193	Returns:
		1194	An error code about the execution of the function.
		1195	-----------------------------------------------------------------------------
		1196	Description:
		1197	The function stops the generation of pulse burst if the specified
		1198	pulser is configured for manual/software operation.
		1199	*/
		1200	CAENVME_API
		1201	CAENVME_StopPulser(int32_t Handle, CVPulserSelect PulSel);
		1202
		1203	/*
		1204	CAENVME_WriteFlashPage
		1205	-----------------------------------------------------------------------------
		1206	Parameters:
		1207	[in] Handle : The handle that identifies the device.
		1208	[in] Data : The data to write.
		1209	[in] PageNum : The flash page number to write.
		1210	-----------------------------------------------------------------------------
		1211	Returns:
		1212	An error code about the execution of the function.
		1213	-----------------------------------------------------------------------------
		1214	Description:
		1215	The function writes the data into the specified flash page.
		1216	*/
		1217	CAENVME_API
		1218	CAENVME_WriteFlashPage(int32_t Handle, unsigned char *Data, int PageNum);
		1219
		1220	/*
		1221	CAENVME_ReadFlashPage
		1222	-----------------------------------------------------------------------------
		1223	Parameters:
		1224	[in] Handle : The handle that identifies the device.
		1225	[out] Data : The data to write.
		1226	[in] PageNum : The flash page number to write.
		1227	-----------------------------------------------------------------------------
		1228	Returns:
		1229	An error code about the execution of the function.
		1230	-----------------------------------------------------------------------------
		1231	Description:
		1232	The function reads the data from the specified flash page.
		1233	*/
		1234	CAENVME_API
		1235	CAENVME_ReadFlashPage(int32_t Handle, unsigned char *Data, int PageNum);
		1236
		1237	/*
		1238	CAENVME_EraseFlashPage
		1239	-----------------------------------------------------------------------------
		1240	Parameters:
		1241	[in] Handle : The handle that identifies the device.
		1242	[in] PageNum : The flash page number to write.
		1243	-----------------------------------------------------------------------------
		1244	Returns:
		1245	An error code about the execution of the function.
		1246	-----------------------------------------------------------------------------
		1247	Description:
		1248	The function erases the specified flash page.
		1249	*/
		1250	CAENVME_API
		1251	CAENVME_EraseFlashPage(int32_t Handle, int Pagenum);
		1252
		1253	#ifdef LINUX
		1254	/*
		1255	CAENVME_BLTReadAsync
		1256	-----------------------------------------------------------------------------
		1257	Parameters:
		1258	[in] Handle : The handle that identifies the device.
		1259	[in] Address : The VME bus address.
		1260	[out] Buffer : The data read from the VME bus.
		1261	[in] Size : The size of the transfer in bytes.
		1262	[in] AM : The address modifier (see CVAddressModifier enum).
		1263	[in] DW : The data width.(see CVDataWidth enum).
		1264	-----------------------------------------------------------------------------
		1265	Returns:
		1266	An error code about the execution of the function.
		1267	-----------------------------------------------------------------------------
		1268	Description:
		1269	The function starts a VME block transfer read cycle. It can be used
		1270	to perform MBLT transfers using 64 bit data width.
		1271	This function cannot be used with the V1718 USB bridge.
		1272	This function can be used only on Linux platforms.
		1273	Take care to call the CAENVME_BLTReadWait function before any other
		1274	call to a CAENVMElib function with the same handle.
		1275	*/
		1276	CAENVME_API
		1277	CAENVME_BLTReadAsync(int32_t Handle, uint32_t Address, void *Buffer,
		1278	int Size, CVAddressModifier AM, CVDataWidth DW);
		1279
		1280	/*
		1281	CAENVME_BLTReadWait
		1282	-----------------------------------------------------------------------------
		1283	Parameters:
		1284	[in] Handle : The handle that identifies the device.
		1285	[out] Count : The number of bytes transferred.
		1286	-----------------------------------------------------------------------------
		1287	Returns:
		1288	An error code about the execution of the function.
		1289	-----------------------------------------------------------------------------
		1290	Description:
		1291	The function wait for the completion of a VME block transfer read
		1292	cycle started with the CAENVME_BLTReadAsync function call.
		1293	This function cannot be used with the V1718 USB bridge.
		1294	This function can be used only on Linux platforms.
		1295	*/
		1296	CAENVME_API
		1297	CAENVME_BLTReadWait(int32_t Handle, int *Count);
		1298
		1299	#endif
		1300
		1301	#ifdef __cplusplus
		1302	}
		1303	#endif // __cplusplus
		1304
		1305	#endif // __CAENVMELIB_H

Subversion Repositories f9daq

(root)//cvi/instr/CAENV1718/CAENVMElib.h – Rev 77